| Age | Commit message (Collapse) | Author |
|---|
|
The rpm-pkg make target currently suffers from a few issues related to
debuginfo:
1. debuginfo for things built into the kernel (vmlinux) is not available
in any RPM produced by make rpm-pkg. This makes using tools like
systemtap against a make rpm-pkg kernel impossible.
2. debug source for the kernel is not available. This means that
commands like 'disas /s' in gdb, which display source intermixed with
assembly, can only print file names/line numbers which then must be
painstakingly resolved to actual source in a separate editor.
3. debuginfo for modules is available, but it remains bundled with the
.ko files that contain module code, in the main kernel RPM. This is a
waste of space for users who do not need to debug the kernel (i.e.
most users).
Address all of these issues by additionally building a debuginfo RPM
when the kernel configuration allows for it, in line with standard
patterns followed by RPM distributors. With these changes:
1. systemtap now works (when these changes are backported to 6.11, since
systemtap lags a bit behind in compatibility), as verified by the
following simple test script:
# stap -e 'probe kernel.function("do_sys_open").call { printf("%s\n", $$parms); }'
dfd=0xffffffffffffff9c filename=0x7fe18800b160 flags=0x88800 mode=0x0
...
2. disas /s works correctly in gdb, with source and disassembly
interspersed:
# gdb vmlinux --batch -ex 'disas /s blk_op_str'
Dump of assembler code for function blk_op_str:
block/blk-core.c:
125 {
0xffffffff814c8740 <+0>: endbr64
127
128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
0xffffffff814c8744 <+4>: mov $0xffffffff824a7378,%rax
0xffffffff814c874b <+11>: cmp $0x23,%edi
0xffffffff814c874e <+14>: ja 0xffffffff814c8768 <blk_op_str+40>
0xffffffff814c8750 <+16>: mov %edi,%edi
126 const char *op_str = "UNKNOWN";
0xffffffff814c8752 <+18>: mov $0xffffffff824a7378,%rdx
127
128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
0xffffffff814c8759 <+25>: mov -0x7dfa0160(,%rdi,8),%rax
126 const char *op_str = "UNKNOWN";
0xffffffff814c8761 <+33>: test %rax,%rax
0xffffffff814c8764 <+36>: cmove %rdx,%rax
129 op_str = blk_op_name[op];
130
131 return op_str;
132 }
0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk>
End of assembler dump.
3. The size of the main kernel package goes down substantially,
especially if many modules are built (quite typical). Here is a
comparison of installed size of the kernel package (configured with
allmodconfig, dwarf4 debuginfo, and module compression turned off)
before and after this patch:
# rpm -qi kernel-6.13* | grep -E '^(Version|Size)'
Version : 6.13.0postpatch+
Size : 1382874089
Version : 6.13.0prepatch+
Size : 17870795887
This is a ~92% size reduction.
Note that a debuginfo package can only be produced if the following
configs are set:
- CONFIG_DEBUG_INFO=y
- CONFIG_MODULE_COMPRESS=n
- CONFIG_DEBUG_INFO_SPLIT=n
The first of these is obvious - we can't produce debuginfo if the build
does not generate it. The second two requirements can in principle be
removed, but doing so is difficult with the current approach, which uses
a generic rpmbuild script find-debuginfo.sh that processes all packaged
executables. If we want to remove those requirements the best path
forward is likely to add some debuginfo extraction/installation logic to
the modules_install target (controllable by flags). That way, it's
easier to operate on modules before they're compressed, and the logic
can be reused by all packaging targets.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The scripts/kconfig/merge_config.sh script requires an existing
$INITFILE (or the $1 argument) as a base file for merging Kconfig
fragments. However, an empty $INITFILE can serve as an initial starting
point, later referenced by the KCONFIG_ALLCONFIG Makefile variable
if -m is not used. This variable can point to any configuration file
containing preset config symbols (the merged output) as stated in
Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will
contain just the merge output requiring the user to run make (i.e.
KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make
olddefconfig).
Instead of failing when `$INITFILE` is missing, create an empty file and
use it as the starting point for merges.
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_NIOS2_DTB_SOURCE_BOOL to CONFIG_BUILTIN_DTB, and
CONFIG_NIOS2_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This option was removed from Kconfig in 8c710f75256b ("net/sched:
Retire tcindex classifier") but from the defconfigs.
Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier")
Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
J2-based devices expect to find a device tree blob at the end of the
.bss section. As of a77725a9a3c5 ("scripts/dtc: Update to upstream
version v1.6.1-19-g0a3a9d3449c8"), libfdt enforces 8-byte alignment
for the DTB, causing J2 devices to fail early in sh_fdt_init().
As the J2 loader firmware calculates the DTB location based on the kernel
image .bss section size rather than the __bss_stop symbol offset, the
required alignment can't be enforced with BSS_SECTION(0, PAGE_SIZE, 8).
To fix this, inline a modified version of the above macro which grows
.bss by the required size. While this change affects all existing SH
boards, it should be benign on platforms which don't need this alignment.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
|
|
The function hrtimer_init() doesn't exist anymore. It was replaced by
hrtimer_setup().
Thus, rename the hrtimer_init trace event to hrtimer_setup to keep it
consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/cba84c3d853c5258aa3a262363a6eac08e2c7afc.1738746927.git.namcao@linutronix.de
|
|
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename debug_init_on_stack() to debug_setup_on_stack() as well, to keep the
names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/073cf6162779a2f5b12624677d4c49ee7eccc1ed.1738746927.git.namcao@linutronix.de
|
|
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename debug_init() to debug_setup() as well, to keep the names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/4b730c1f79648b16a1c5413f928fdc2e138dfc43.1738746927.git.namcao@linutronix.de
|
|
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() as well, to
keep the names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/807694aedad9353421c4a7347629a30c5c31026f.1738746927.git.namcao@linutronix.de
|
|
The struct hrtimer::function field can only be changed using
hrtimer_setup*() or hrtimer_update_function(), and both already null-check
'function'. Therefore, null-checking 'function' in hrtimer_start_range_ns()
is not necessary.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/4661c571ee87980c340ccc318fc1a473c0c8f6bc.1738746927.git.namcao@linutronix.de
|
|
Make the struct hrtimer::function field private, to prevent users from
changing this field in an unsafe way. hrtimer_update_function() should be
used if the callback function needs to be changed.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/7d0e6e0c5c59a64a9bea940051aac05d750bc0c2.1738746927.git.namcao@linutronix.de
|
|
__hrtimer_init() is only called by __hrtimer_setup(). Simplify by merging
__hrtimer_init() into __hrtimer_setup().
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/8a0a847a35f711f66b2d05b57255aa44e7e61279.1738746927.git.namcao@linutronix.de
|
|
__hrtimer_init_sleeper() calls __hrtimer_init() and also sets up the
callback function. But there is already __hrtimer_setup() which does both
actions.
Switch to use __hrtimer_setup() to simplify the code.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/d9a45a51b6a8aa0045310d63f73753bf6b33f385.1738746927.git.namcao@linutronix.de
|
|
hrtimer_init() is now unused. Delete it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/003722f60c7a2a4f8d4ed24fb741aa313b7e5136.1738746927.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Coccinelle scripted cleanup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare input updates for 6.15 merge window.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a race condition in the newly added eip93 driver"
* tag 'v6.15-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: inside-secure/eip93 - acquire lock on eip93_put_descriptor hash
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix machine check handler _CIF_MCCK_GUEST bit setting by adding the
missing base register for relocated lowcore address
- Fix build failure on older linkers by conditionally adding the
-no-pie linker option only when it is supported
- Fix inaccurate kernel messages in vfio-ap by providing descriptive
error notifications for AP queue sharing violations
- Fix PCI isolation logic by ensuring non-VF devices correctly return
false in zpci_bus_is_isolated_vf()
- Fix PCI DMA range map setup by using dma_direct_set_offset() to add a
proper sentinel element, preventing potential overruns and
translation errors
- Cleanup header dependency problems with asm-offsets.c
- Add fault info for unexpected low-address protection faults in user
mode
- Add support for HOTPLUG_SMT, replacing the arch-specific "nosmt"
handling with common code handling
- Use bitop functions to implement CPU flag helper functions to ensure
that bits cannot get lost if modified in different contexts on a CPU
- Remove unused machine_flags for the lowcore
* tag 's390-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Fix no AP queue sharing allowed message written to kernel log
s390/pci: Fix dev.dma_range_map missing sentinel element
s390/mm: Dump fault info in case of low address protection fault
s390/smp: Add support for HOTPLUG_SMT
s390: Fix linker error when -no-pie option is unavailable
s390/processor: Use bitop functions for cpu flag helper functions
s390/asm-offsets: Remove ASM_OFFSETS_C
s390/asm-offsets: Include ftrace_regs.h instead of ftrace.h
s390/kvm: Split kvm_host header file
s390/pci: Fix zpci_bus_is_isolated_vf() for non-VFs
s390/lowcore: Remove unused machine_flags
s390/entry: Fix setting _CIF_MCCK_GUEST with lowcore relocation
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- reconnect fixes: three for updating rsize/wsize and an SMB1 reconnect
fix
- RFC1001 fixes: fixing connections to nonstandard ports, and negprot
retries
- fix mfsymlinks to old servers
- make mapping of open flags for SMB1 more accurate
- permission fixes: adding retry on open for write, and one for stat to
workaround unexpected access denied
- add two new xattrs, one for retrieving SACL and one for retrieving
owner (without having to retrieve the whole ACL)
- fix mount parm validation for echo_interval
- minor cleanup (including removing now unneeded cifs_truncate_page)
* tag '6.15-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: Implement is_network_name_deleted for SMB1
cifs: Remove cifs_truncate_page() as it should be superfluous
cifs: Do not add FILE_READ_ATTRIBUTES when using GENERIC_READ/EXECUTE/ALL
cifs: Improve SMB2+ stat() to work also without FILE_READ_ATTRIBUTES
cifs: Add fallback for SMB2 CREATE without FILE_READ_ATTRIBUTES
cifs: Fix querying and creating MF symlinks over SMB1
cifs: Fix access_flags_to_smbopen_mode
cifs: Fix negotiate retry functionality
cifs: Improve handling of NetBIOS packets
cifs: Allow to disable or force initialization of NetBIOS session
cifs: Add a new xattr system.smb3_ntsd_owner for getting or setting owner
cifs: Add a new xattr system.smb3_ntsd_sacl for getting or setting SACLs
smb: client: Update IO sizes after reconnection
smb: client: Store original IO parameters and prevent zero IO sizes
smb:client: smb: client: Add reverse mapping from tcon to superblocks
cifs: remove unreachable code in cifs_get_tcp_session()
cifs: fix integer overflow in match_server()
|
|
Pull ntb fixes from Jon Mason:
"Bug fixes for NTB Switchtec driver mw negative shift, Intel NTB link
status db, ntb_perf double unmap (in error case), and MSI 64bit
arithmetic.
Also, add new AMD NTB PCI IDs, update AMD NTB maintainer, and pull in
patch to reduce the stack usage in IDT driver"
* tag 'ntb-6.15' of https://github.com/jonmason/ntb:
ntb_hw_amd: Add NTB PCI ID for new gen CPU
ntb: reduce stack usage in idt_scan_mws
ntb: use 64-bit arithmetic for the MSI doorbell mask
MAINTAINERS: Update AMD NTB maintainers
ntb_perf: Delete duplicate dmaengine_unmap_put() call in perf_copy_chunk()
ntb: intel: Fix using link status DB's
ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
bridge:
- tda998x: Select CONFIG_DRM_KMS_HELPER
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250404065105.GA27699@linux.fritz.box
|
|
This reverts commit 757b000f7b936edf79311ab0971fe465bbda75ea.
Miroslav reported that the changes for handling the inconsistencies in the
coarse time getters result in a regression on the adjtimex() side.
There are two issues:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one.
2) The clearing of the accumulated NTP error is changing the behaviour as
well.
Userspace expects that multiplier/frequency updates are in effect, when the
syscall returns, so delaying the update to the next tick is not solving the
problem either.
Revert the change, so that the established expectations of user space
implementations (ntpd, chronyd) are restored. The re-introduced
inconsistency of the coarse time getters will be addressed in a subsequent
fix.
Fixes: 757b000f7b93 ("timekeeping: Fix possible inconsistencies in _COARSE clockids")
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/Z-qsg6iDGlcIJulJ@localhost
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- four fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so
that the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen"
* tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
selftests: net: amt: indicate progress in the stress test
netlink: specs: rt_route: pull the ifa- prefix out of the names
netlink: specs: rt_addr: pull the ifa- prefix out of the names
netlink: specs: rt_addr: fix get multi command name
netlink: specs: rt_addr: fix the spec format / schema failures
net: avoid false positive warnings in __net_mp_close_rxq()
net: move mp dev config validation to __net_mp_open_rxq()
net: ibmveth: make veth_pool_store stop hanging
arcnet: Add NULL check in com20020pci_probe()
ipv6: Do not consider link down nexthops in path selection
ipv6: Start path selection from the first nexthop
usbnet:fix NPE during rx_complete
net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP
net: fix geneve_opt length integer overflow
io_uring/zcrx: fix selftests w/ updated netdev Python helpers
selftests: net: use netdevsim in netns test
docs: net: document netdev notifier expectations
net: dummy: request ops lock
netdevsim: add dummy device notifiers
net: rename rtnl_net_debug to lock_debug
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that came in during the merge window,
everything is driver specific with nothing standing out particularly"
* tag 'spi-fix-v6.15-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm2835: Restore native CS probing when pinctrl-bcm2835 is absent
spi: bcm2835: Do not call gpiod_put() on invalid descriptor
spi: cadence-qspi: revert "Improve spi memory performance"
spi: cadence: Fix out-of-bounds array access in cdns_mrvl_xspi_setup_clock()
spi: fsl-qspi: use devm function instead of driver remove
spi: SPI_QPIC_SNAND should be tristate and depend on MTD
spi-rockchip: Fix register out of bounds access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix NULL pointer dereferences while probing
- Disable ACPI fan access for T495* and E560
- ISST: Correct command storage data length
* tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: consistently use my dedicated email address
platform/x86: ISST: Correct command storage data length
platform/x86: thinkpad_acpi: disable ACPI fan access for T495* and E560
platform/x86: thinkpad_acpi: Fix NULL pointer dereferences while probing
|
|
Frank reported, that the common irq_force_complete_move() breaks the out of
tree build of ia64. The reason is that ia64 uses the migration code, but
does not have hierarchical interrupt domains enabled.
This went unnoticed in mainline as both x86 and RISC-V have hierarchical
domains enabled. Not that it matters for mainline, but it's still
inconsistent.
Use irqd_get_parent_data() instead of accessing the parent_data field
directly. The helper returns NULL when hierarchical domains are disabled
otherwise it accesses the parent_data field of the domain.
No functional change.
Fixes: 751dc837dabd ("genirq: Introduce common irq_force_complete_move() implementation")
Reported-by: Frank Scheiner <frank.scheiner@web.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Frank Scheiner <frank.scheiner@web.de>
Link: https://lore.kernel.org/all/87h634ugig.ffs@tglx
|
|
Our CI expects output from the test at least once every 10 minutes.
The AMT test when running on debug kernel is just on the edge
of that time for the stress test. Improve the output:
- print the name of the test first, before starting it,
- output a dot every 10% of the way.
Output after:
TEST: amt discovery [ OK ]
TEST: IPv4 amt multicast forwarding [ OK ]
TEST: IPv6 amt multicast forwarding [ OK ]
TEST: IPv4 amt traffic forwarding torture .......... [ OK ]
TEST: IPv6 amt traffic forwarding torture .......... [ OK ]
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250403145636.2891166-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is confusing to see 'host' and 'domain' to be used as 'domain'. Given
this header is all about domains, switch the remaining 'host' uses to
'domain'.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-5-jirislaby@kernel.org
|
|
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_get_default_host() to irq_get_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-4-jirislaby@kernel.org
|
|
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_set_default_host() to irq_set_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-3-jirislaby@kernel.org
|
|
Jakub Kicinski says:
====================
netlink: specs: rt_addr: fix problems revealed by C codegen
I put together basic YNL C support for classic netlink. This revealed
a few problems in the rt_addr spec.
v1: https://lore.kernel.org/20250401012939.2116915-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250403013706.2828322-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in route-attrs and metrics and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: 023289b4f582 ("doc/netlink: Add spec for rt route messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in addr-attrs and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: dfb0f7d9d979 ("doc/netlink: Add spec for rt addr messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Command names should match C defines, codegens may depend on it.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 4f280376e531 ("selftests/net: Add selftest for IPv4 RTM_GETMULTICAST support")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The spec is mis-formatted, schema validation says:
Failed validating 'type' in schema['properties']['operations']['properties']['list']['items']['properties']['dump']['properties']['request']['properties']['value']:
{'minimum': 0, 'type': 'integer'}
On instance['operations']['list'][3]['dump']['request']['value']:
'58 - ifa-family'
The ifa-family clearly wants to be part of an attribute list.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Yuyang Huang <yuyanghuang@google.com>
Fixes: 4f280376e531 ("selftests/net: Add selftest for IPv4 RTM_GETMULTICAST support")
Link: https://patch.msgid.link/20250403013706.2828322-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
net: make memory provider install / close paths more common
We seem to be fixing bugs in config path for devmem which also exist
in the io_uring ZC path. Let's try to make the two paths more common,
otherwise this is bound to keep happening.
Found by code inspection and compile tested only.
v1: https://lore.kernel.org/20250331194201.2026422-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250403013405.2827250-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit under Fixes solved the problem of spurious warnings when we
uninstall an MP from a device while its down. The __net_mp_close_rxq()
which is used by io_uring was not fixed. Move the fix over and reuse
__net_mp_close_rxq() in the devmem path.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250403013405.2827250-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
devmem code performs a number of safety checks to avoid having
to reimplement all of them in the drivers. Move those to
__net_mp_open_rxq() and reuse that function for binding to make
sure that io_uring ZC also benefits from them.
While at it rename the queue ID variable to rxq_idx in
__net_mp_open_rxq(), we touch most of the relevant lines.
The XArray insertion is reordered after the netdev_rx_queue_restart()
call, otherwise we'd need to duplicate the queue index check
or risk inserting an invalid pointer. The XArray allocation
failures should be extremely rare.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 6e18ed929d3b ("net: add helpers for setting a memory provider on an rx queue")
Link: https://patch.msgid.link/20250403013405.2827250-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
v2:
- Created a single error handling unlock and exit in veth_pool_store
- Greatly expanded commit message with previous explanatory-only text
Summary: Use rtnl_mutex to synchronize veth_pool_store with itself,
ibmveth_close and ibmveth_open, preventing multiple calls in a row to
napi_disable.
Background: Two (or more) threads could call veth_pool_store through
writing to /sys/devices/vio/30000002/pool*/*. You can do this easily
with a little shell script. This causes a hang.
I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new
kernel. I ran this test again and saw:
Setting pool0/active to 0
Setting pool1/active to 1
[ 73.911067][ T4365] ibmveth 30000002 eth0: close starting
Setting pool1/active to 1
Setting pool1/active to 0
[ 73.911367][ T4366] ibmveth 30000002 eth0: close starting
[ 73.916056][ T4365] ibmveth 30000002 eth0: close complete
[ 73.916064][ T4365] ibmveth 30000002 eth0: open starting
[ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds.
[ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8
[ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000
[ 243.683852][ T123] Call Trace:
[ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable)
[ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0
[ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0
[ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210
[ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50
[ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0
[ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60
[ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc
[ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270
[ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0
[ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0
[ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650
[ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150
[ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340
[ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
...
[ 243.684087][ T123] Showing all locks held in the system:
[ 243.684095][ T123] 1 lock held by khungtaskd/123:
[ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248
[ 243.684114][ T123] 4 locks held by stress.sh/4365:
[ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60
[ 243.684166][ T123] 5 locks held by stress.sh/4366:
[ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60
[ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0
From the ibmveth debug, two threads are calling veth_pool_store, which
calls ibmveth_close and ibmveth_open. Here's the sequence:
T4365 T4366
----------------- ----------------- ---------
veth_pool_store veth_pool_store
ibmveth_close
ibmveth_close
napi_disable
napi_disable
ibmveth_open
napi_enable <- HANG
ibmveth_close calls napi_disable at the top and ibmveth_open calls
napi_enable at the top.
https://docs.kernel.org/networking/napi.html]] says
The control APIs are not idempotent. Control API calls are safe
against concurrent use of datapath APIs but an incorrect sequence of
control API calls may result in crashes, deadlocks, or race
conditions. For example, calling napi_disable() multiple times in a
row will deadlock.
In the normal open and close paths, rtnl_mutex is acquired to prevent
other callers. This is missing from veth_pool_store. Use rtnl_mutex in
veth_pool_store fixes these hangs.
Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com>
Fixes: 860f242eb534 ("[PATCH] ibmveth change buffer pools dynamically")
Reviewed-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402154403.386744-1-davemarq@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
devm_kasprintf() returns NULL when memory allocation fails. Currently,
com20020pci_probe() does not check for this case, which results in a
NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensure
no resources are left allocated.
Fixes: 6b17a597fc2f ("arcnet: restoring support for multiple Sohard Arcnet cards")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250402135036.44697-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
ipv6: Multipath routing fixes
This patchset contains two fixes for IPv6 multipath routing. See the
commit messages for more details.
====================
Link: https://patch.msgid.link/20250402114224.293392-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nexthops whose link is down are not supposed to be considered during
path selection when the "ignore_routes_with_linkdown" sysctl is set.
This is done by assigning them a negative region boundary.
However, when comparing the computed hash (unsigned) with the region
boundary (signed), the negative region boundary is treated as unsigned,
resulting in incorrect nexthop selection.
Fix by treating the computed hash as signed. Note that the computed hash
is always in range of [0, 2^31 - 1].
Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250402114224.293392-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cited commit transitioned IPv6 path selection to use hash-threshold
instead of modulo-N. With hash-threshold, each nexthop is assigned a
region boundary in the multipath hash function's output space and a
nexthop is chosen if the calculated hash is smaller than the nexthop's
region boundary.
Hash-threshold does not work correctly if path selection does not start
with the first nexthop. For example, if fib6_select_path() is always
passed the last nexthop in the group, then it will always be chosen
because its region boundary covers the entire hash function's output
space.
Fix this by starting the selection process from the first nexthop and do
not consider nexthops for which rt6_score_route() provided a negative
score.
Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N")
Reported-by: Stanislav Fomichev <stfomichev@gmail.com>
Closes: https://lore.kernel.org/netdev/Z9RIyKZDNoka53EO@mini-arch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250402114224.293392-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Missing usbnet_going_away Check in Critical Path.
The usb_submit_urb function lacks a usbnet_going_away
validation, whereas __usbnet_queue_skb includes this check.
This inconsistency creates a race condition where:
A URB request may succeed, but the corresponding SKB data
fails to be queued.
Subsequent processes:
(e.g., rx_complete → defer_bh → __skb_unlink(skb, list))
attempt to access skb->next, triggering a NULL pointer
dereference (Kernel Panic).
Fixes: 04e906839a05 ("usbnet: fix cyclical race on disconnect with work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Ying Lu <luying1@xiaomi.com>
Link: https://patch.msgid.link/4c9ef2efaa07eb7f9a5042b74348a67e5a3a7aea.1743584159.git.luying1@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current implementation octeontx2 manages XDP_ABORTED and XDP
invalid as XDP_PASS forwarding the skb to the networking stack.
Align the behaviour to other XDP drivers handling XDP_ABORTED and XDP
invalid as XDP_DROP.
Please note this patch has just compile tested.
Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250401-octeontx2-xdp-abort-fix-v1-1-f0587c35a0b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix a performance regression on AMD iGPU and dGPU drivers, related to
the unintended activation of DMA bounce buffers that regressed game
performance if KASLR disturbed things just enough
- Fix a copy_user_generic() performance regression on certain older
non-FSRM/ERMS CPUs
- Fix a Clang build warning due to a semantic merge conflict the Kunit
tree generated with the x86 tree
- Fix FRED related system hang during S4 resume
- Remove an unused API
* tag 'x86-urgent-2025-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Fix system hang during S4 resume with FRED enabled
x86/platform/iosf_mbi: Remove unused iosf_mbi_unregister_pmic_bus_access_notifier()
x86/mm/init: Handle the special case of device private pages in add_pages(), to not increase max_pfn and trigger dma_addressing_limited() bounce buffers
x86/tools: Drop duplicate unlikely() definition in insn_decoder_test.c
x86/uaccess: Improve performance by aligning writes to 8 bytes in copy_user_generic(), on non-FSRM/ERMS CPUs
|
