summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-01-24net/mlx5e: Allow software parsing when IPsec crypto is enabledLeon Romanovsky
All ConnectX devices have software parsing capability enabled, but it is more correct to set allow_swp only if capability exists, which for IPsec means that crypto offload is supported. Fixes: 2451da081a34 ("net/mlx5: Unify device IPsec capabilities check") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASORahul Rameshbabu
mlx5 devices have specific constants for choosing the CQ period mode. These constants do not have to match the constants used by the kernel software API for DIM period mode selection. Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: DR, Can't go to uplink vport on RX ruleYevgeny Kliteynik
Go-To-Vport action on RX is not allowed when the vport is uplink. In such case, the packet should be dropped. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: DR, Use the right GVMI number for drop actionYevgeny Kliteynik
When FW provides ICM addresses for drop RX/TX, the provided capability is 64 bits that contain its GVMI as well as the ICM address itself. In case of TX DROP this GVMI is different from the GVMI that the domain is operating on. This patch fixes the action to use these GVMI IDs, as provided by FW. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Bridge, fix multicast packets sent to uplinkMoshe Shemesh
To enable multicast packets which are offloaded in bridge multicast offload mode to be sent also to uplink, FTE bit uplink_hairpin_en should be set. Add this bit to FTE for the bridge multicast offload rules. Fixes: 18c2916cee12 ("net/mlx5: Bridge, snoop igmp/mld packets") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Fix a WARN upon a callback command failureYishai Hadas
The below WARN [1] is reported once a callback command failed. As a callback runs under an interrupt context, needs to use the IRQ save/restore variant. [1] DEBUG_LOCKS_WARN_ON(lockdep_hardirq_context()) WARNING: CPU: 15 PID: 0 at kernel/locking/lockdep.c:4353 lockdep_hardirqs_on_prepare+0x11b/0x180 Modules linked in: vhost_net vhost tap mlx5_vfio_pci vfio_pci vfio_pci_core vfio_iommu_type1 vfio mlx5_vdpa vringh vhost_iotlb vdpa nfnetlink_cttimeout openvswitch nsh ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrackxt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 15 PID: 0 Comm: swapper/15 Tainted: G W 6.7.0-rc4+ #1587 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:lockdep_hardirqs_on_prepare+0x11b/0x180 Code: 00 5b c3 c3 e8 e6 0d 58 00 85 c0 74 d6 8b 15 f0 c3 76 01 85 d2 75 cc 48 c7 c6 04 a5 3b 82 48 c7 c7 f1 e9 39 82 e8 95 12 f9 ff <0f> 0b 5b c3 e8 bc 0d 58 00 85 c0 74 ac 8b 3d c6 c3 76 01 85 ff 75 RSP: 0018:ffffc900003ecd18 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffff88885fbdb880 RDI: ffff88885fbdb888 RBP: 00000000ffffff87 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 284e4f5f4e524157 R12: 00000000002c9aa1 R13: ffff88810aace980 R14: ffff88810aace9b8 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff88885fbc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f731436f4c8 CR3: 000000010aae6001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? __warn+0x81/0x170 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? report_bug+0xf8/0x1c0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? lockdep_hardirqs_on_prepare+0x11b/0x180 trace_hardirqs_on+0x4a/0xa0 raw_spin_unlock_irq+0x24/0x30 cmd_status_err+0xc0/0x1a0 [mlx5_core] cmd_status_err+0x1a0/0x1a0 [mlx5_core] mlx5_cmd_exec_cb_handler+0x24/0x40 [mlx5_core] mlx5_cmd_comp_handler+0x129/0x4b0 [mlx5_core] cmd_comp_notifier+0x1a/0x20 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 mlx5_eq_async_int+0xe7/0x200 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 irq_int_handler+0x11/0x20 [mlx5_core] __handle_irq_event_percpu+0x99/0x220 ? tick_irq_enter+0x5d/0x80 handle_irq_event_percpu+0xf/0x40 handle_irq_event+0x3a/0x60 handle_edge_irq+0xa2/0x1c0 __common_interrupt+0x55/0x140 common_interrupt+0x7d/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x13/0x20 Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 ea 08 25 01 85 c0 7e 07 0f 00 2d 7f b0 26 00 fb f4 <fa> c3 90 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 80 d0 02 00 RSP: 0018:ffffc9000010fec8 EFLAGS: 00000242 RAX: 0000000000000001 RBX: 000000000000000f RCX: 4000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff811c410c RBP: ffffffff829478c0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? do_idle+0x1ec/0x210 default_idle_call+0x6c/0x90 do_idle+0x1ec/0x210 cpu_startup_entry+0x26/0x30 start_secondary+0x11b/0x150 secondary_startup_64_no_verify+0x165/0x16b </TASK> irq event stamp: 833284 hardirqs last enabled at (833283): [<ffffffff811c410c>] do_idle+0x1ec/0x210 hardirqs last disabled at (833284): [<ffffffff81daf9ef>] common_interrupt+0xf/0xa0 softirqs last enabled at (833224): [<ffffffff81dc199f>] __do_softirq+0x2bf/0x40e softirqs last disabled at (833177): [<ffffffff81178ddf>] irq_exit_rcu+0x7f/0xa0 Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Fix peer flow lists handlingVlad Buslov
The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP flag when list of peer flows has become empty. However, if any concurrent user holds a reference to a peer flow (for example, the neighbor update workqueue task is updating peer flow's parent encap entry concurrently), then the flow will not be removed from the peer list and, consecutively, DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm will try to remove the flow from eswitch instances that it has never peered with causing either NULL pointer dereference when trying to remove the flow peer list head of peer_index that was never initialized or a warning if the list debug config is enabled[0]. Fix the issue by always removing the peer flow from the list even when not releasing the last reference to it. [0]: [ 3102.985806] ------------[ cut here ]------------ [ 3102.986223] list_del corruption, ffff888139110698->next is NULL [ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding] [ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3 [ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b [ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286 [ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640 [ 3102.997188] DEL flow 00000000be367878 on port 0 [ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff [ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100 [ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240 [ 3103.000790] FS: 00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000 [ 3103.001486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0 [ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3103.003787] Call Trace: [ 3103.004055] <TASK> [ 3103.004297] ? __warn+0x7d/0x130 [ 3103.004623] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.005094] ? report_bug+0xf1/0x1c0 [ 3103.005439] ? console_unlock+0x4a/0xd0 [ 3103.005806] ? handle_bug+0x3f/0x70 [ 3103.006149] ? exc_invalid_op+0x13/0x60 [ 3103.006531] ? asm_exc_invalid_op+0x16/0x20 [ 3103.007430] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.007910] mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core] [ 3103.008463] mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] [ 3103.008944] mlx5e_flow_put+0x26/0x50 [mlx5_core] [ 3103.009401] mlx5e_delete_flower+0x25f/0x380 [mlx5_core] [ 3103.009901] tc_setup_cb_destroy+0xab/0x180 [ 3103.010292] fl_hw_destroy_filter+0x99/0xc0 [cls_flower] [ 3103.010779] __fl_delete+0x2d4/0x2f0 [cls_flower] [ 3103.011207] fl_delete+0x36/0x80 [cls_flower] [ 3103.011614] tc_del_tfilter+0x56f/0x750 [ 3103.011982] rtnetlink_rcv_msg+0xff/0x3a0 [ 3103.012362] ? netlink_ack+0x1c7/0x4e0 [ 3103.012719] ? rtnl_calcit.isra.44+0x130/0x130 [ 3103.013134] netlink_rcv_skb+0x54/0x100 [ 3103.013533] netlink_unicast+0x1ca/0x2b0 [ 3103.013902] netlink_sendmsg+0x361/0x4d0 [ 3103.014269] __sock_sendmsg+0x38/0x60 [ 3103.014643] ____sys_sendmsg+0x1f2/0x200 [ 3103.015018] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.015265] ___sys_sendmsg+0x87/0xd0 [ 3103.016608] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.017014] ? ___sys_recvmsg+0x9b/0xd0 [ 3103.017381] ? ttwu_do_activate.isra.137+0x58/0x180 [ 3103.017821] ? wake_up_q+0x49/0x90 [ 3103.018157] ? futex_wake+0x137/0x160 [ 3103.018521] ? __sys_sendmsg+0x51/0x90 [ 3103.018882] __sys_sendmsg+0x51/0x90 [ 3103.019230] ? exit_to_user_mode_prepare+0x56/0x130 [ 3103.019670] do_syscall_64+0x3c/0x80 [ 3103.020017] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 3103.020469] RIP: 0033:0x7f4254811ef4 [ 3103.020816] Code: 89 f3 48 83 ec 10 48 89 7c 24 08 48 89 14 24 e8 42 eb ff ff 48 8b 14 24 41 89 c0 48 89 de 48 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 48 89 04 24 e8 78 eb ff ff 48 8b [ 3103.022290] RSP: 002b:00007f424cdd9480 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 3103.022970] RAX: ffffffffffffffda RBX: 00007f424cdd9510 RCX: 00007f4254811ef4 [ 3103.023564] RDX: 0000000000000000 RSI: 00007f424cdd9510 RDI: 0000000000000012 [ 3103.024158] RBP: 00007f424cdda238 R08: 0000000000000000 R09: 00007f41d801a4b0 [ 3103.024748] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001 [ 3103.025341] R13: 00007f424cdd9510 R14: 00007f424cdda240 R15: 00007f424cdd99a0 [ 3103.025931] </TASK> [ 3103.026182] ---[ end trace 0000000000000000 ]--- [ 3103.027033] ------------[ cut here ]------------ Fixes: 9be6c21fdcf8 ("net/mlx5e: Handle offloads flows per peer") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Fix inconsistent hairpin RQT sizesTariq Toukan
The processing of traffic in hairpin queues occurs in HW/FW and does not involve the cpus, hence the upper bound on max num channels does not apply to them. Using this bound for the hairpin RQT max_table_size is wrong. It could be too small, and cause the error below [1]. As the RQT size provided on init does not get modified later, use the same value for both actual and max table sizes. [1] mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1200): CREATE_RQT(0x916) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x538faf), err(-22) Fixes: 74a8dadac17e ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Fix operation precedence bug in port timestamping napi_poll contextRahul Rameshbabu
Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value. Fixes: 92214be5979c ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Fix query of sd_group fieldTariq Toukan
The sd_group field moved in the HW spec from the MPIR register to the vport context. Align the query accordingly. Fixes: f5e956329960 ("net/mlx5: Expose Management PCIe Index Register (MPIR)") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Use the correct lag ports number when creating TISesSaeed Mahameed
The cited commit moved the code of mlx5e_create_tises() and changed the loop to create TISes over MLX5_MAX_PORTS constant value, instead of getting the correct lag ports supported by the device, which can cause FW errors on devices with less than MLX5_MAX_PORTS ports. Change that back to mlx5e_get_num_lag_ports(mdev). Also IPoIB interfaces create there own TISes, they don't use the eth TISes, pass a flag to indicate that. This fixes the following errors that might appear in kernel log: mlx5_cmd_out_err:808:(pid 650): CREATE_TIS(0x912) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x595b5d), err(-22) mlx5e_create_mdev_resources:174:(pid 650): alloc tises failed, -22 Fixes: b25bd37c859f ("net/mlx5: Move TISes from priv to mdev HW resources") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24ahci: asm1166: correct count of reported portsConrad Kostecki
The ASM1166 SATA host controller always reports wrongly, that it has 32 ports. But in reality, it only has six ports. This seems to be a hardware issue, as all tested ASM1166 SATA host controllers reports such high count of ports. Example output: ahci 0000:09:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0xffffff3f impl SATA mode. By adjusting the port_map, the count is limited to six ports. New output: ahci 0000:09:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0x3f impl SATA mode. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=211873 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218346 Signed-off-by: Conrad Kostecki <conikost@gentoo.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-01-23cifs: fix stray unlock in cifs_chan_skip_or_disableShyam Prasad N
A recent change moved the code that decides to skip a channel or disable multichannel entirely, into a helper function. During this, a mutex_unlock of the session_mutex should have been removed. Doing that here. Fixes: f591062bdbf4 ("cifs: handle servers that still advertise multichannel after disabling") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23cifs: set replay flag for retries of write commandShyam Prasad N
Similar to the rest of the commands, this is a change to add replay flags on retry. This one does not add a back-off, considering that we may want to flush a write ASAP to the server. Considering that this will be a flush of cached pages, the retrans value is also not honoured. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23cifs: commands that are retried should have replay flag setShyam Prasad N
MS-SMB2 states that the header flag SMB2_FLAGS_REPLAY_OPERATION needs to be set when a command needs to be retried, so that the server is aware that this is a replay for an operation that appeared before. This can be very important, for example, for state changing operations and opens which get retried following a reconnect; since the client maybe unaware of the status of the previous open. This is particularly important for multichannel scenario, since disconnection of one connection does not mean that the session is lost. The requests can be replayed on another channel. This change also makes use of exponential back-off before replays and also limits the number of retries to "retrans" mount option value. Also, this change does not modify the read/write codepath. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23cifs: helper function to check replayable error codesShyam Prasad N
The code to check for replay is not just -EAGAIN. In some cases, the send request or receive response may result in network errors, which we're now mapping to -ECONNABORTED. This change introduces a helper function which checks if the error returned in one of the above two errors. And all checks for replays will now use this helper. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23cifs: translate network errors on send to -ECONNABORTEDShyam Prasad N
When the network stack returns various errors, we today bubble up the error to the user (in case of soft mounts). This change translates all network errors except -EINTR and -EAGAIN to -ECONNABORTED. A similar approach is taken when we receive network errors when reading from the socket. The change also forces the cifsd thread to reconnect during it's next activity. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-24net/sched: flower: Fix chain template offloadIdo Schimmel
When a qdisc is deleted from a net device the stack instructs the underlying driver to remove its flow offload callback from the associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack then continues to replay the removal of the filters in the block for this driver by iterating over the chains in the block and invoking the 'reoffload' operation of the classifier being used. In turn, the classifier in its 'reoffload' operation prepares and emits a 'FLOW_CLS_DESTROY' command for each filter. However, the stack does not do the same for chain templates and the underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when a qdisc is deleted. This results in a memory leak [1] which can be reproduced using [2]. Fix by introducing a 'tmplt_reoffload' operation and have the stack invoke it with the appropriate arguments as part of the replay. Implement the operation in the sole classifier that supports chain templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}' command based on whether a flow offload callback is being bound to a filter block or being unbound from one. As far as I can tell, the issue happens since cited commit which reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains() in __tcf_block_put(). The order cannot be reversed as the filter block is expected to be freed after flushing all the chains. [1] unreferenced object 0xffff888107e28800 (size 2048): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[...... 01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................ backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab374e>] __kmalloc+0x4e/0x90 [<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0 unreferenced object 0xffff88816d2c0400 (size 1024): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): 40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8..... 10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m.... backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90 [<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0 [<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0 [<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [2] # tc qdisc add dev swp1 clsact # tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32 # tc qdisc del dev swp1 clsact # devlink dev reload pci/0000:06:00.0 Fixes: bbf73830cd48 ("net: sched: traverse chains in block with tcf_get_next_chain()") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-23selftests: fill in some missing configs for netJakub Kicinski
We are missing a lot of config options from net selftests, it seems: tun/tap: CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP fib_tests: CONFIG_NET_SCH_FQ_CODEL l2tp: CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH sctp-vrf: CONFIG_INET_DIAG txtimestamp: CONFIG_NET_CLS_U32 vxlan_mdb: CONFIG_BRIDGE_VLAN_FILTERING gre_gso: CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE srv6_end_dt*_l3vpn: CONFIG_IPV6_SEG6_LWTUNNEL ip_local_port_range: CONFIG_MPTCP fib_test: CONFIG_NET_CLS_BASIC rtnetlink: CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE CONFIG_NET_IPGRE, CONFIG_BONDING fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING vxlan_mdb: CONFIG_NET_ACT_GACT tls: CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305 psample: CONFIG_PSAMPLE fcnal: CONFIG_TCP_MD5SIG Try to add them in a semi-alphabetical order. Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test") Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask") Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE") Link: https://lore.kernel.org/r/20240122203528.672004-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 KbytesMichael Kelley
Current code in netvsc_drv_init() incorrectly assumes that PAGE_SIZE is 4 Kbytes, which is wrong on ARM64 with 16K or 64K page size. As a result, the default VMBus ring buffer size on ARM64 with 64K page size is 8 Mbytes instead of the expected 512 Kbytes. While this doesn't break anything, a typical VM with 8 vCPUs and 8 netvsc channels wastes 120 Mbytes (8 channels * 2 ring buffers/channel * 7.5 Mbytes/ring buffer). Unfortunately, the module parameter specifying the ring buffer size is in units of 4 Kbyte pages. Ideally, it should be in units that are independent of PAGE_SIZE, but backwards compatibility prevents changing that now. Fix this by having netvsc_drv_init() hardcode 4096 instead of using PAGE_SIZE when calculating the ring buffer size in bytes. Also use the VMBUS_RING_SIZE macro to ensure proper alignment when running with page size larger than 4K. Cc: <stable@vger.kernel.org> # 5.15.x Fixes: 7aff79e297ee ("Drivers: hv: Enable Hyper-V code to be built on ARM64") Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240122162028.348885-1-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23Revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb"Rahul Rameshbabu
This reverts commit b34ab3527b9622ca4910df24ff5beed5aa66c6b5. Using skb_ensure_writable_head_tail without a call to skb_unshare causes the MACsec stack to operate on the original skb rather than a copy in the macsec_encrypt path. This causes the buffer to be exceeded in space, and leads to warnings generated by skb_put operations. Opting to revert this change since skb_copy_expand is more efficient than skb_ensure_writable_head_tail followed by a call to skb_unshare. Log: ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:2464! invalid opcode: 0000 [#1] SMP KASAN CPU: 21 PID: 61997 Comm: iperf3 Not tainted 6.7.0-rc8_for_upstream_debug_2024_01_07_17_05 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_put+0x113/0x190 Code: 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 70 3b 9d bc 00 00 00 77 0e 48 83 c4 08 4c 89 e8 5b 5d 41 5d c3 <0f> 0b 4c 8b 6c 24 20 89 74 24 04 e8 6d b7 f0 fe 8b 74 24 04 48 c7 RSP: 0018:ffff8882694e7278 EFLAGS: 00010202 RAX: 0000000000000025 RBX: 0000000000000100 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ffff88816ae0bad4 RBP: ffff88816ae0ba60 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88811ba5abfa R13: ffff8882bdecc100 R14: ffff88816ae0ba60 R15: ffff8882bdecc0ae FS: 00007fe54df02740(0000) GS:ffff88881f080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe54d92e320 CR3: 000000010a345003 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die+0x33/0x90 ? skb_put+0x113/0x190 ? do_trap+0x1b4/0x3b0 ? skb_put+0x113/0x190 ? do_error_trap+0xb6/0x180 ? skb_put+0x113/0x190 ? handle_invalid_op+0x2c/0x30 ? skb_put+0x113/0x190 ? exc_invalid_op+0x2b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? skb_put+0x113/0x190 ? macsec_start_xmit+0x4e9/0x21d0 macsec_start_xmit+0x830/0x21d0 ? get_txsa_from_nl+0x400/0x400 ? lock_downgrade+0x690/0x690 ? dev_queue_xmit_nit+0x78b/0xae0 dev_hard_start_xmit+0x151/0x560 __dev_queue_xmit+0x1580/0x28f0 ? check_chain_key+0x1c5/0x490 ? netdev_core_pick_tx+0x2d0/0x2d0 ? __ip_queue_xmit+0x798/0x1e00 ? lock_downgrade+0x690/0x690 ? mark_held_locks+0x9f/0xe0 ip_finish_output2+0x11e4/0x2050 ? ip_mc_finish_output+0x520/0x520 ? ip_fragment.constprop.0+0x230/0x230 ? __ip_queue_xmit+0x798/0x1e00 __ip_queue_xmit+0x798/0x1e00 ? __skb_clone+0x57a/0x760 __tcp_transmit_skb+0x169d/0x3490 ? lock_downgrade+0x690/0x690 ? __tcp_select_window+0x1320/0x1320 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x286/0x400 ? tcp_small_queue_check.isra.0+0x120/0x3d0 tcp_write_xmit+0x12b6/0x7100 ? skb_page_frag_refill+0x1e8/0x460 __tcp_push_pending_frames+0x92/0x320 tcp_sendmsg_locked+0x1ed4/0x3190 ? tcp_sendmsg_fastopen+0x650/0x650 ? tcp_sendmsg+0x1a/0x40 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x286/0x400 tcp_sendmsg+0x28/0x40 ? inet_send_prepare+0x1b0/0x1b0 __sock_sendmsg+0xc5/0x190 sock_write_iter+0x222/0x380 ? __sock_sendmsg+0x190/0x190 ? kfree+0x96/0x130 vfs_write+0x842/0xbd0 ? kernel_write+0x530/0x530 ? __fget_light+0x51/0x220 ? __fget_light+0x51/0x220 ksys_write+0x172/0x1d0 ? update_socket_protocol+0x10/0x10 ? __x64_sys_read+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x286/0x400 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7fe54d9018b7 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffdbd4191d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000025 RCX: 00007fe54d9018b7 RDX: 0000000000000025 RSI: 0000000000d9859c RDI: 0000000000000004 RBP: 0000000000d9859c R08: 0000000000000004 R09: 0000000000000000 R10: 00007fe54d80afe0 R11: 0000000000000246 R12: 0000000000000004 R13: 0000000000000025 R14: 00007fe54e00ec00 R15: 0000000000d982a0 </TASK> Modules linked in: 8021q garp mrp iptable_raw bonding vfio_pci rdma_ucm ib_umad mlx5_vfio_pci mlx5_ib vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ip_gre nf_tables ipip tunnel4 ib_ipoib ip6_gre gre ip6_tunnel tunnel6 geneve openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core zram zsmalloc fuse [last unloaded: ib_uverbs] ---[ end trace 0000000000000000 ]--- Cc: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20240118191811.50271-1-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23cifs: cifs_pick_channel should try selecting active channelsShyam Prasad N
cifs_pick_channel today just selects a channel based on the policy of least loaded channel. However, it does not take into account if the channel needs reconnect. As a result, we can have failures in send that can be completely avoided. This change doesn't make a channel a candidate for this selection if it needs reconnect. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23cifs: Share server EOF pos with netfslibDavid Howells
Use cifsi->netfs_ctx.remote_i_size instead of cifsi->server_eof so that netfslib can refer to it to. Signed-off-by: David Howells <dhowells@redhat.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23smb: Work around Clang __bdos() type confusionKees Cook
Recent versions of Clang gets confused about the possible size of the "user" allocation, and CONFIG_FORTIFY_SOURCE ends up emitting a warning[1]: repro.c:126:4: warning: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 126 | __write_overflow_field(p_size_field, size); | ^ for this memset(): int len; __le16 *user; ... len = ses->user_name ? strlen(ses->user_name) : 0; user = kmalloc(2 + (len * 2), GFP_KERNEL); ... if (len) { ... } else { memset(user, '\0', 2); } While Clang works on this bug[2], switch to using a direct assignment, which avoids memset() entirely which both simplifies the code and silences the false positive warning. (Making "len" size_t also silences the warning, but the direct assignment seems better.) Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://github.com/ClangBuiltLinux/linux/issues/1966 [1] Link: https://github.com/llvm/llvm-project/issues/77813 [2] Cc: Steve French <sfrench@samba.org> Cc: Paulo Alcantara <pc@manguebit.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Shyam Prasad N <sprasad@microsoft.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: llvm@lists.linux.dev Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23Merge tag 'trace-v6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing and eventfs fixes from Steven Rostedt: - Fix histogram tracing_map insertion. The tracing_map_insert copies the value into the elt variable and then assigns the elt to the entry value. But it is possible that the entry value becomes visible on other CPUs before the elt is fully initialized. This is fixed by adding a wmb() between the initialization of the elt variable and assigning it. - Have eventfs directory have unique inode numbers. Having them be all the same proved to be a failure as the 'find' application will think that the directories are causing loops, as it checks for directory loops via their inodes. Have the evenfs dir entries get their inodes assigned when they are referenced and then save them in the eventfs_inode structure. * tag 'trace-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Save directory inodes in the eventfs_inode structure tracing: Ensure visibility when inserting an element into tracing_map
2024-01-23io_uring: enable audit and restrict cred override for IORING_OP_FIXED_FD_INSTALLPaul Moore
We need to correct some aspects of the IORING_OP_FIXED_FD_INSTALL command to take into account the security implications of making an io_uring-private file descriptor generally accessible to a userspace task. The first change in this patch is to enable auditing of the FD_INSTALL operation as installing a file descriptor into a task's file descriptor table is a security relevant operation and something that admins/users may want to audit. The second change is to disable the io_uring credential override functionality, also known as io_uring "personalities", in the FD_INSTALL command. The credential override in FD_INSTALL is particularly problematic as it affects the credentials used in the security_file_receive() LSM hook. If a task were to request a credential override via REQ_F_CREDS on a FD_INSTALL operation, the LSM would incorrectly check to see if the overridden credentials of the io_uring were able to "receive" the file as opposed to the task's credentials. After discussions upstream, it's difficult to imagine a use case where we would want to allow a credential override on a FD_INSTALL operation so we are simply going to block REQ_F_CREDS on IORING_OP_FIXED_FD_INSTALL operations. Fixes: dc18b89ab113 ("io_uring/openclose: add support for IORING_OP_FIXED_FD_INSTALL") Signed-off-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20240123215501.289566-2-paul@paul-moore.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-23riscv, bpf: Fix unpredictable kernel crash about RV64 struct_opsPu Lehui
We encountered a kernel crash triggered by the bpf_tcp_ca testcase as show below: Unable to handle kernel paging request at virtual address ff60000088554500 Oops [#1] ... CPU: 3 PID: 458 Comm: test_progs Tainted: G OE 6.8.0-rc1-kselftest_plain #1 Hardware name: riscv-virtio,qemu (DT) epc : 0xff60000088554500 ra : tcp_ack+0x288/0x1232 epc : ff60000088554500 ra : ffffffff80cc7166 sp : ff2000000117ba50 gp : ffffffff82587b60 tp : ff60000087be0040 t0 : ff60000088554500 t1 : ffffffff801ed24e t2 : 0000000000000000 s0 : ff2000000117bbc0 s1 : 0000000000000500 a0 : ff20000000691000 a1 : 0000000000000018 a2 : 0000000000000001 a3 : ff60000087be03a0 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000000021 a7 : ffffffff8263f880 s2 : 000000004ac3c13b s3 : 000000004ac3c13a s4 : 0000000000008200 s5 : 0000000000000001 s6 : 0000000000000104 s7 : ff2000000117bb00 s8 : ff600000885544c0 s9 : 0000000000000000 s10: ff60000086ff0b80 s11: 000055557983a9c0 t3 : 0000000000000000 t4 : 000000000000ffc4 t5 : ffffffff8154f170 t6 : 0000000000000030 status: 0000000200000120 badaddr: ff60000088554500 cause: 000000000000000c Code: c796 67d7 0000 0000 0052 0002 c13b 4ac3 0000 0000 (0001) 0000 ---[ end trace 0000000000000000 ]--- The reason is that commit 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") changes the func_addr of arch_prepare_bpf_trampoline in struct_ops from NULL to non-NULL, while we use func_addr on RV64 to differentiate between struct_ops and regular trampoline. When the struct_ops testcase is triggered, it emits wrong prologue and epilogue, and lead to unpredictable issues. After commit 2cd3e3772e41, we can use BPF_TRAMP_F_INDIRECT to distinguish them as it always be set in struct_ops. Fixes: 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240123023207.1917284-1-pulehui@huaweicloud.com
2024-01-23docs: admin-guide: remove obsolete advice related to SLAB allocatorLukas Bulwahn
Commit 1db9d06aaa55 ("mm/slab: remove CONFIG_SLAB from all Kconfig and Makefile") removes the config SLAB and makes the SLUB allocator the only default allocator in the kernel. Hence, the advice on reducing OS jitter due to kworker kernel threads to build with CONFIG_SLUB instead of CONFIG_SLAB is obsolete. Remove the obsolete advice to build with SLUB instead of SLAB. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20231130095515.21586-1-lukas.bulwahn@gmail.com
2024-01-23doc: admin-guide/kernel-parameters: remove useless commentVegard Nossum
This comment about DRM drivers has been there since the first git commit. It simply doesn't belong in kernel-parameters; remove it. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20240111085220.3693059-1-vegard.nossum@oracle.com
2024-01-23docs/accel: correct links to mailing list archivesHu Haowen
Since the mailing archive list lkml.org is obsolete, change the links into lore.kernel.org's ones. Signed-off-by: Hu Haowen <2023002089@link.tyut.edu.cn> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20240118090140.4868-1-2023002089@link.tyut.edu.cn
2024-01-23docs/sphinx: Fix TOC scroll hack for the home pageGustavo Sousa
When on the documentation home page, there won't be any ".current" element since no entry from the TOC was selected yet. That results in a javascript error. Fix that by only trying to set the scrollTop if we have matches for current entries. Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20240123162157.61819-2-gustavo.sousa@intel.com
2024-01-23Merge tag 'linux-cpupower-6.8-rc2' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Merge cpupower utility update for 6.8-rc2 from Shuah Khan: "This cpupower fixes update for Linux 6.8-rc2 consists of one single fix to an issue where CFLAGS is passed as a make argument for cpupower, but bench makefile does not inherit and append to them." This fixes the problem so the user specified CFLAGS are honored. * tag 'linux-cpupower-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: tools cpupower bench: Override CFLAGS assignments
2024-01-23smb: client: delete "true", "false" definesAlexey Dobriyan
Kernel has its own official true/false definitions. The defines aren't even used in this file. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23Merge tag 'wireless-2024-01-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.8-rc2 The most visible fix here is the ath11k crash fix which was introduced in v6.7. We also have a fix for iwlwifi memory corruption and few smaller fixes in the stack. * tag 'wireless-2024-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix race condition on enabling fast-xmit wifi: iwlwifi: fix a memory corruption wifi: mac80211: fix potential sta-link leak wifi: cfg80211/mac80211: remove dependency on non-existing option wifi: cfg80211: fix missing interfaces when dumping wifi: ath11k: rely on mac80211 debugfs handling for vif wifi: p54: fix GCC format truncation warning with wiphy->fw_version ==================== Link: https://lore.kernel.org/r/20240122153434.E0254C433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23block: Fix WARNING in _copy_from_iterChristian A. Ehrhardt
Syzkaller reports a warning in _copy_from_iter because an iov_iter is supposedly used in the wrong direction. The reason is that syzcaller managed to generate a request with a transfer direction of SG_DXFER_TO_FROM_DEV. This instructs the kernel to copy user buffers into the kernel, read into the copied buffers and then copy the data back to user space. Thus the iovec is used in both directions. Detect this situation in the block layer and construct a new iterator with the correct direction for the copy-in. Reported-by: syzbot+a532b03fdfee2c137666@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/0000000000009b92c10604d7a5e9@google.com/t/ Reported-by: syzbot+63dec323ac56c28e644f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/0000000000003faaa105f6e7c658@google.com/T/ Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240121202634.275068-1-lk@c--e.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-23spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detectedDevyn Liu
Return IRQ_NONE from the interrupt handler when no interrupt was detected. Because an empty interrupt will cause a null pointer error: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: complete+0x54/0x100 hisi_sfc_v3xx_isr+0x2c/0x40 [spi_hisi_sfc_v3xx] __handle_irq_event_percpu+0x64/0x1e0 handle_irq_event+0x7c/0x1cc Signed-off-by: Devyn Liu <liudingyuan@huawei.com> Link: https://msgid.link/r/20240123071149.917678-1-liudingyuan@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-23Merge branch 'netfs-fixes' of ↵Christian Brauner
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull netfs fixes from David Howells: * 'netfs-fixes' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix missing/incorrect unlocking of RCU read lock afs: Remove afs_dynroot_d_revalidate() as it is redundant afs: Fix error handling with lookup via FS.InlineBulkStatus afs: Hide silly-rename files from userspace cachefiles, erofs: Fix NULL deref in when cachefiles is not doing ondemand-mode netfs: Fix a NULL vs IS_ERR() check in netfs_perform_write() netfs, fscache: Prevent Oops in fscache_put_cache() cifs: Don't use certain unnecessary folio_*() functions afs: Don't use certain unnecessary folio_*() functions netfs: Don't use certain unnecessary folio_*() functions Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-01-23eventfs: Save directory inodes in the eventfs_inode structureSteven Rostedt (Google)
The eventfs inodes and directories are allocated when referenced. But this leaves the issue of keeping consistent inode numbers and the number is only saved in the inode structure itself. When the inode is no longer referenced, it can be freed. When the file that the inode was representing is referenced again, the inode is once again created, but the inode number needs to be the same as it was before. Just making the inode numbers the same for all files is fine, but that does not work with directories. The find command will check for loops via the inode number and having the same inode number for directories triggers: # find /sys/kernel/tracing find: File system loop detected; '/sys/kernel/debug/tracing/events/initcall/initcall_finish' is part of the same file system loop as '/sys/kernel/debug/tracing/events/initcall'. [..] Linus pointed out that the eventfs_inode structure ends with a single 32bit int, and on 64 bit machines, there's likely a 4 byte hole due to alignment. We can use this hole to store the inode number for the eventfs_inode. All directories in eventfs are represented by an eventfs_inode and that data structure can hold its inode number. That last int was also purposely placed at the end of the structure to prevent holes from within. Now that there's a 4 byte number to hold the inode, both the inode number and the last integer can be moved up in the structure for better cache locality, where the llist and rcu fields can be moved to the end as they are only used when the eventfs_inode is being deleted. Link: https://lore.kernel.org/all/CAMuHMdXKiorg-jiuKoZpfZyDJ3Ynrfb8=X+c7x0Eewxn-YRdCA@mail.gmail.com/ Link: https://lore.kernel.org/linux-trace-kernel/20240122152748.46897388@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 53c41052ba31 ("eventfs: Have the inodes all for files and directories all be the same") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Kees Cook <keescook@chromium.org>
2024-01-23spi: spi-cadence: Reverse the order of interleaved write and read operationsAmit Kumar Mahapatra
In the existing implementation, when executing interleaved write and read operations in the ISR for a transfer length greater than the FIFO size, the TXFIFO write precedes the RXFIFO read. Consequently, the initially received data in the RXFIFO is pushed out and lost, leading to a failure in data integrity. To address this issue, reverse the order of interleaved operations and conduct the RXFIFO read followed by the TXFIFO write. Fixes: 6afe2ae8dc48 ("spi: spi-cadence: Interleave write of TX and read of RX FIFO") Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Link: https://msgid.link/r/20231218090652.18403-1-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-23spi: spi-imx: Use dev_err_probe for failed DMA channel requestsAlexander Stein
If dma_request_chan() fails, no error is shown nor any information is shown in /sys/kernel/debug/devices_deferred if -EPROBE_DEFER is returned. Use dev_err_probe to fix both problems. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://msgid.link/r/20240110085403.457089-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-23spi: bcm-qspi: fix SFDP BFPT read by usig mspi readKamal Dasu
SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op() call. This fixes SFDP parameter page read failures seen with parts that now use SFDP protocol to read the basic flash parameter table. Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://msgid.link/r/20240109210033.43249-1-kamal.dasu@broadcom.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-23ipv6: init the accept_queue's spinlocks in inet6_createZhengchao Shao
In commit 198bc90e0e73("tcp: make sure init the accept_queue's spinlocks once"), the spinlocks of accept_queue are initialized only when socket is created in the inet4 scenario. The locks are not initialized when socket is created in the inet6 scenario. The kernel reports the following error: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107) register_lock_class (kernel/locking/lockdep.c:1289) __lock_acquire (kernel/locking/lockdep.c:5015) lock_acquire.part.0 (kernel/locking/lockdep.c:5756) _raw_spin_lock_bh (kernel/locking/spinlock.c:178) inet_csk_listen_stop (net/ipv4/inet_connection_sock.c:1386) tcp_disconnect (net/ipv4/tcp.c:2981) inet_shutdown (net/ipv4/af_inet.c:935) __sys_shutdown (./include/linux/file.h:32 net/socket.c:2438) __x64_sys_shutdown (net/socket.c:2445) do_syscall_64 (arch/x86/entry/common.c:52) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f52ecd05a3d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007f52ecf5dde8 EFLAGS: 00000293 ORIG_RAX: 0000000000000030 RAX: ffffffffffffffda RBX: 00007f52ecf5e640 RCX: 00007f52ecd05a3d RDX: 00007f52ecc8b188 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00007f52ecf5de20 R08: 00007ffdae45c69f R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f52ecf5e640 R13: 0000000000000000 R14: 00007f52ecc8b060 R15: 00007ffdae45c6e0 Fixes: 198bc90e0e73 ("tcp: make sure init the accept_queue's spinlocks once") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240122102001.2851701-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-23ovl: mark xwhiteouts directory with overlay.opaque='x'Amir Goldstein
An opaque directory cannot have xwhiteouts, so instead of marking an xwhiteouts directory with a new xattr, overload overlay.opaque xattr for marking both opaque dir ('y') and xwhiteouts dir ('x'). This is more efficient as the overlay.opaque xattr is checked during lookup of directory anyway. This also prevents unnecessary checking the xattr when reading a directory without xwhiteouts, i.e. most of the time. Note that the xwhiteouts marker is not checked on the upper layer and on the last layer in lowerstack, where xwhiteouts are not expected. Fixes: bc8df7a3dc03 ("ovl: Add an alternative type of whiteout") Cc: <stable@vger.kernel.org> # v6.7 Reviewed-by: Alexander Larsson <alexl@redhat.com> Tested-by: Alexander Larsson <alexl@redhat.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2024-01-23netlink: fix potential sleeping issue in mqueue_flush_fileZhengchao Shao
I analyze the potential sleeping issue of the following processes: Thread A Thread B ... netlink_create //ref = 1 do_mq_notify ... sock = netlink_getsockbyfilp ... //ref = 2 info->notify_sock = sock; ... ... netlink_sendmsg ... skb = netlink_alloc_large_skb //skb->head is vmalloced ... netlink_unicast ... sk = netlink_getsockbyportid //ref = 3 ... netlink_sendskb ... __netlink_sendskb ... skb_queue_tail //put skb to sk_receive_queue ... sock_put //ref = 2 ... ... ... netlink_release ... deferred_put_nlk_sk //ref = 1 mqueue_flush_file spin_lock remove_notification netlink_sendskb sock_put //ref = 0 sk_free ... __sk_destruct netlink_sock_destruct skb_queue_purge //get skb from sk_receive_queue ... __skb_queue_purge_reason kfree_skb_reason __kfree_skb ... skb_release_all skb_release_head_state netlink_skb_destructor vfree(skb->head) //sleeping while holding spinlock In netlink_sendmsg, if the memory pointed to by skb->head is allocated by vmalloc, and is put to sk_receive_queue queue, also the skb is not freed. When the mqueue executes flush, the sleeping bug will occur. Use vfree_atomic instead of vfree in netlink_skb_destructor to solve the issue. Fixes: c05cdb1b864f ("netlink: allow large data transfers from user-space") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20240122011807.2110357-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-23x86/cpu: Add model number for Intel Clearwater Forest processorTony Luck
Server product based on the Atom Darkmont core. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240117191844.56180-1-tony.luck@intel.com
2024-01-23x86/CPU/AMD: Add X86_FEATURE_ZEN5Borislav Petkov (AMD)
Add a synthetic feature flag for Zen5. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240104201138.5072-1-bp@alien8.de
2024-01-23selftest: Don't reuse port for SO_INCOMING_CPU test.Kuniyuki Iwashima
Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to fire somewhat randomly. # # RUN so_incoming_cpu.before_reuseport.test3 ... # # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0) # # test3: Test terminated by assertion # # FAIL so_incoming_cpu.before_reuseport.test3 # not ok 3 so_incoming_cpu.before_reuseport.test3 When the test failed, not-yet-accepted CLOSE_WAIT sockets received SYN with a "challenging" SEQ number, which was sent from an unexpected CPU that did not create the receiver. The test basically does: 1. for each cpu: 1-1. create a server 1-2. set SO_INCOMING_CPU 2. for each cpu: 2-1. set cpu affinity 2-2. create some clients 2-3. let clients connect() to the server on the same cpu 2-4. close() clients 3. for each server: 3-1. accept() all child sockets 3-2. check if all children have the same SO_INCOMING_CPU with the server The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse. In a loop of 2., close() changed the client state to FIN_WAIT_2, and the peer transitioned to CLOSE_WAIT. In another loop of 2., connect() happened to select the same port of the FIN_WAIT_2 socket, and it was reused as the default value of net.ipv4.tcp_tw_reuse is 2. As a result, the new client sent SYN to the CLOSE_WAIT socket from a different CPU, and the receiver's sk_incoming_cpu was overwritten with unexpected CPU ID. Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket responded with Challenge ACK. The new client properly returned RST and effectively killed the CLOSE_WAIT socket. This way, all clients were created successfully, but the error was detected later by 3-2., ASSERT_EQ(cpu, i). To avoid the failure, let's make sure that (i) the number of clients is less than the number of available ports and (ii) such reuse never happens. Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Tested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-23tcp: Add memory barrier to tcp_push()Salvatore Dipietro
On CPUs with weak memory models, reads and updates performed by tcp_push to the sk variables can get reordered leaving the socket throttled when it should not. The tasklet running tcp_wfree() may also not observe the memory updates in time and will skip flushing any packets throttled by tcp_push(), delaying the sending. This can pathologically cause 40ms extra latency due to bad interactions with delayed acks. Adding a memory barrier in tcp_push removes the bug, similarly to the previous commit bf06200e732d ("tcp: tsq: fix nonagle handling"). smp_mb__after_atomic() is used to not incur in unnecessary overhead on x86 since not affected. Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and Apache Tomcat 9.0.83 running the basic servlet below: import java.io.IOException; import java.io.OutputStreamWriter; import java.io.PrintWriter; import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; public class HelloWorldServlet extends HttpServlet { @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=utf-8"); OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8"); String s = "a".repeat(3096); osw.write(s,0,s.length()); osw.flush(); } } Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS c6i.8xlarge instance. Before the patch an additional 40ms latency from P99.99+ values is observed while, with the patch, the extra latency disappears. No patch and tcp_autocorking=1 ./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.60.173:8080/hello/hello ... 50.000% 0.91ms 75.000% 1.13ms 90.000% 1.46ms 99.000% 1.74ms 99.900% 1.89ms 99.990% 41.95ms <<< 40+ ms extra latency 99.999% 48.32ms 100.000% 48.96ms With patch and tcp_autocorking=1 ./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.60.173:8080/hello/hello ... 50.000% 0.90ms 75.000% 1.13ms 90.000% 1.45ms 99.000% 1.72ms 99.900% 1.83ms 99.990% 2.11ms <<< no 40+ ms extra latency 99.999% 2.53ms 100.000% 2.62ms Patch has been also tested on x86 (m7i.2xlarge instance) which it is not affected by this issue and the patch doesn't introduce any additional delay. Fixes: 7aa5470c2c09 ("tcp: tsq: move tsq_flags close to sk_wmem_alloc") Signed-off-by: Salvatore Dipietro <dipiets@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240119190133.43698-1-dipiets@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-23fbdev: stifb: Fix crash in stifb_blank()Helge Deller
Avoid a kernel crash in stifb by providing the correct pointer to the fb_info struct. Prior to commit e2e0b838a184 ("video/sticore: Remove info field from STI struct") the fb_info struct was at the beginning of the fb struct. Fixes: e2e0b838a184 ("video/sticore: Remove info field from STI struct") Signed-off-by: Helge Deller <deller@gmx.de> Cc: Thomas Zimmermann <tzimmermann@suse.de>
2024-01-22drm/ttm: fix ttm pool initialization for no-dma-device driversFedor Pchelkin
The QXL driver doesn't use any device for DMA mappings or allocations so dev_to_node() will panic inside ttm_device_init() on NUMA systems: general protection fault, probably for non-canonical address 0xdffffc000000007a: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000003d0-0x00000000000003d7] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.7.0+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:ttm_device_init+0x10e/0x340 Call Trace: qxl_ttm_init+0xaa/0x310 qxl_device_init+0x1071/0x2000 qxl_pci_probe+0x167/0x3f0 local_pci_probe+0xe1/0x1b0 pci_device_probe+0x29d/0x790 really_probe+0x251/0x910 __driver_probe_device+0x1ea/0x390 driver_probe_device+0x4e/0x2e0 __driver_attach+0x1e3/0x600 bus_for_each_dev+0x12d/0x1c0 bus_add_driver+0x25a/0x590 driver_register+0x15c/0x4b0 qxl_pci_driver_init+0x67/0x80 do_one_initcall+0xf5/0x5d0 kernel_init_freeable+0x637/0xb10 kernel_init+0x1c/0x2e0 ret_from_fork+0x48/0x80 ret_from_fork_asm+0x1b/0x30 RIP: 0010:ttm_device_init+0x10e/0x340 Fall back to NUMA_NO_NODE if there is no device for DMA. Found by Linux Verification Center (linuxtesting.org). Fixes: b0a7ce53d494 ("drm/ttm: Schedule delayed_delete worker closer") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Christian König <christian.koenig@amd.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 23:46:08 +0000