summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-13mmc: esdhc: add PIO mode supportJerry Huang
For some FSL ESDHC controllers (e.g. P2020E, Rev1.0), the SDHC can not work on DMA mode because of the hardware bug, so we set a broken dma flag and use PIO mode. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Gao Guanhua <B22826@freescale.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-13mmc: core: Ensure clocks are always enabled before host interactionSujit Reddy Thumma
Ensure clocks are always enabled before any interaction with the host controller driver. This makes sure that there is no race between host execution and the core layer turning off clocks in different context with clock gating framework. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-13mmc: of_mmc_spi: fix little endian supportJean-Christophe PLAGNIOL-VILLARD
The voltage_ranges is supposed to switch from big endian to little endian. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-13mmc: core: UHS sdio card that fails should not exceed 50MHzPhilip Rakity
A UHS sdio card that fails initialization at 1.8v signaling is not in UHS mode. We cannot use the speed in the the cis to reflect the bus speed as this is the maxiumum value and will not reflect the fact that the host is operating at a lower (non uhs) bus speed. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Reviewed-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-13Merge tag 'for-linus' of git://github.com/rustyrussell/linuxLinus Torvalds
* tag 'for-linus' of git://github.com/rustyrussell/linux: module: fix broken isapnp handling in file2alias module: make module param bint handle nul value
2012-02-14module: fix broken isapnp handling in file2aliasOndrej Zary
Handling of isapnp module aliases was broken by commit 626596e295d477c0fefa08cd5daa7dd011b1bb2c by changing "isapnp" string to "isa". The code was then modified by commit e49ce14150c64b29a8dd211df785576fa19a9858 but this bug remained. Change the string back to "isapnp". Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-02-14module: make module param bint handle nul valueDave Young
Allow bint param accept nul values, just do same as bool param. Signed-off-by: Dave Young <dyoung@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-02-13Merge branch 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann
* 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: drop ide driver in favor of the pata one pata/at91: use newly introduced SMC accessors ARM: at91: add accessor to manage SMC ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91: USB AT91 gadget registration for module
2012-02-13Merge branch 'fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3 ARM: OMAP3: cm-t35: fix section mismatch warning ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains ARM: OMAP2+: board-generic: Add missing handle_irq callbacks
2012-02-13Merge tag 'battery-fixes-for-v3.3-rc2' of ↵Linus Torvalds
git://git.infradead.org/users/cbou/battery-urgent Just a few small fixes for a bunch of drivers. Nothing noteworthy. * tag 'battery-fixes-for-v3.3-rc2' of git://git.infradead.org/users/cbou/battery-urgent: lp8727_charger: Add terminating entry for i2c_device_id table power_supply: Fix modalias for charger-manager lp8727_chager: Fix permissions on a header file bq27x00_battery: Fix flag register read Revert "bq27x00_battery: Fix reporting status value for bq27500 battery"
2012-02-13Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Two bugfixes in XFS for 3.3: one fix passes KMEM_SLEEP to kmem_realloc instead of 0, and the other resolves a possible deadlock in xfs quotas. * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: use a normal shrinker for the dquot freelist xfs: pass KM_SLEEP flag to kmem_realloc() in xlog_recover_add_to_cnt_trans()
2012-02-13Merge branch 'omap-fixes-warnings' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
This set of changes are fixing various section mismatch warnings which look to be completely valid. Primerily, those which are fixed are those which can cause oopses by manipulation of driver binding via sysfs. For example: calling code marked __init from driver probe __devinit functions. Some of these changes will be reworked at the next merge window when the underlying reasons are sorted out. In the mean time, I think it's important to have this fixed for correctness. Also included in this set are fixes to various error messages in OMAP - including making them gramatically correct, fixing a few spelling errors, and more importantly, making them greppable by unwrapping them. Tony Lindgren has acked all these patches, put them out for testing a week ago, and I've tested them on the platforms I have. * 'omap-fixes-warnings' of git://git.linaro.org/people/rmk/linux-arm: ARM: omap: resolve nebulous 'Error setting wl12xx data' ARM: omap: fix wrapped error messages in omap_hwmod.c ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup() ARM: omap: fix section mismatch error for omap_4430sdp_display_init() ARM: omap: fix section mismatch warning for omap_secondary_startup() ARM: omap: preemptively fix section mismatch in omap4_sdp4430_wifi_mux_init() ARM: omap: fix section mismatch warning in mux.c ARM: omap: fix section mismatch errors in TWL PMIC driver ARM: omap: fix uninformative vc/i2c configuration error message ARM: omap: fix vc.c PMIC error message ARM: omap: fix prm44xx.c OMAP44XX_IRQ_PRCM build error
2012-02-13Merge branch 'omap-fixes-urgent' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
This pull request covers the major oopsing issues with OMAP, caused by the lack of the TWL driver. Even when the TWL driver is not built in, we shouldn't oops. * 'omap-fixes-urgent' of git://git.linaro.org/people/rmk/linux-arm: ARM: omap: fix broken twl-core dependencies and ifdefs ARM: omap: fix oops in drivers/video/omap2/dss/dpi.c ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found
2012-02-13Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7322/1: Print BUG instead of undefined instruction on BUG_ON() ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR ARM: 7320/1: Fix proc_info table alignment
2012-02-13i387: make irq_fpu_usable() tests more robustLinus Torvalds
Some code - especially the crypto layer - wants to use the x86 FP/MMX/AVX register set in what may be interrupt (typically softirq) context. That *can* be ok, but the tests for when it was ok were somewhat suspect. We cannot touch the thread-specific status bits either, so we'd better check that we're not going to try to save FP state or anything like that. Now, it may be that the TS bit is always cleared *before* we set the USEDFPU bit (and only set when we had already cleared the USEDFP before), so the TS bit test may actually have been sufficient, but it certainly was not obviously so. So this explicitly verifies that we will not touch the TS_USEDFPU bit, and adds a few related sanity-checks. Because it seems that somehow AES-NI is corrupting user FP state. The cause is not clear, and this patch doesn't fix it, but while debugging it I really wanted the code to be more obviously correct and robust. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-13i387: math_state_restore() isn't called from asmLinus Torvalds
It was marked asmlinkage for some really old and stale legacy reasons. Fix that and the equally stale comment. Noticed when debugging the irq_fpu_usable() bugs. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-13ks8851: Fix NOHZ local_softirq_pending 08 warningCousson, Benoit
This fix a similar problem as in 72092cc45378176ba700034c91b7af2db524df26 and 481a8199142c050b72bff8a1956a49fd0a75bbe0 ("can: fix NOHZ local_softirq_pending 08 warning"). This fix replaces netif_rx() with netif_rx_ni() which has to be used from process/softirq context. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13bnx2x: fix bnx2x_storm_stats_update() on big endianEric Dumazet
commit 619c5cb6885 (New 7.0 FW: bnx2x, cnic, bnx2i, bnx2fc) added new sparse warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Vladislav Zolotarov <vladz@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13ixp4xx-eth: fix PHY name to match MDIO bus nameFlorian Fainelli
Commit 0869b3a4: ixp4xx-eth: use an unique MDIO bus name changed the MDIO bus name from "0" to "ixp4xx-eth-0", as a result the PHY name is not longer appropriate and will not match the MDIO bus name so PHY connection will not succeed, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13octeon: fix PHY name to match MDIO bus nameFlorian Fainelli
Commit "d6c25be: mdio-octeon: use an unique MDIO bus name" changed the octeon MDIO bus name from "0" to "mdio-octeon-0", change the PHY formatting logic to account for that name change, so that PHY connection on this bus succeeds. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13fec: fix PHY name to match fixed MDIO bus nameFlorian Fainelli
Commit "391420f7: fec: use an unique MDIO bus name" first modified the MDIO bus name to include the platform name, then in commit "a7ed07d5: net: fec: correct phy_name buffer length when init phy_name" the PHY name formatting was fixed in the case the PHY matches a PHY driver. The FEC driver however, also handles the case where we want to attach to the fixed MDIO bus name, which was previously named "0", and now "fixed-0". Change the PHY formatting logic to account for that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13bcm63xx-enet: fix PHY name to match MDIO bus nameFlorian Fainelli
Commit 3e617506: bcm63xx_enet: use an unique MDIO bus name introduced a regression in the PHY connection logic, since the PHY name was formatted to expect the bus name to be "0" or "1", whereas it is now "bcm63xx-enet-0" or "bcm63xx-enet-1". Reported-by: Joel EJC <joel_ejc@yahoofr> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13cpmac: fix PHY name to match MDIO bus nameFlorian Fainelli
Commit d1733f07: cpmac: use an unique MDIO bus name changed the MDIO bus name from "1" to "cpmac-1", this breaks the PHY connection logic because the PHY name still uses the old bus names "0" and "1", fix that to always use the mdio bus id instead. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13mlx4: Fix kcalloc parameters swappedAxel Lin
The first parameter should be "number of elements" and the second parameter should be "element size". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13ASoC: wm8988: Remove unneded -codec from driver nameMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-13ASoC: wm8988: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-13ASoC: wm9081: Use module_i2c_driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-13ASoC: tegra+alc5632: Added digital microphone DAPM widget.Leon Romanovsky
ALC5632 codec supports digital microphone. This patch adds DAPM widget. Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-13ARM: at91: drop ide driver in favor of the pata oneJean-Christophe PLAGNIOL-VILLARD
Driver at91_ide is broken and should not be fixed: remove it. Modification of device files that where making use of it. The PATA driver (pata_at91) is able to replace at91_ide. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-13pata/at91: use newly introduced SMC accessorsJean-Christophe PLAGNIOL-VILLARD
pata_at91 driver is broken since faee0cc: "make smc register base soc independent" Fix it with newly introduced SMC accessors. The overall action of removal of at91_sys_read/write will allow to use the pata_at91 on a single zImage kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: linux-ide@vger.kernel.org
2012-02-13ARM: at91: add accessor to manage SMCJean-Christophe PLAGNIOL-VILLARD
SMC, Static Memory Controller will need more accessors to fine configure its parameters. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-13ARM: at91:rtc/rtc-at91sam9: ioremap register bankJean-Christophe PLAGNIOL-VILLARD
Instead of computing virtual address with AT91_VA_BASE_SYS, use the appropriate ioremap() call on the driver "memory" resource. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-13ARM: at91: USB AT91 gadget registration for moduleNicolas Ferre
Registration of at91_udc as a module will enable SoC related code. Fix following an idea from Karel Znamenacek. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Karel Znamenacek <karel@ryston.cz> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org>
2012-02-13Merge branch 'fix/acer-alc889-fix' into fix/hdaTakashi Iwai
Conflicts: sound/pci/hda/patch_realtek.c Merged back the fix for Acer Aspire 6935 with ALC889 codec. The fix commit was based on 3.2 kernel so that it can be applied to stable kernel cleanly.
2012-02-13ALSA: hda - Fix silent speaker output on Acer Aspire 6935Takashi Iwai
Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13ALSA: hda - Fix initialization of secondary capture source on VT1705Takashi Iwai
VT1705 codec has two ADCs where the secondary ADC has no MUX but only a fixed connection to the mic pin. This confused the driver and it tries always overriding the input-source selection by assumption of the existing MUX for the secondary ADC, resulted in resetting the input-source at each time PM (including power-saving) occurs. The fix is simply to check the existence of MUX for secondary ADCs in the initialization code. Tested-by: Anisse Astier <anisse@astier.eu> Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13ALSA: hda - Add another jack-detection suppression for ASUS ALC892Takashi Iwai
Add the jack-detect suppression for an ASUS machine with ALC892 codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13ALSA: hda - Suppress auto-mute feature on some machines with ALC861Takashi Iwai
A few machines with ALC861 & co are reported not to work properly with the auto-mute feature in software. The auto-mute feature is implemented in the hardware level, and the jack-detection never works with them. Also, rename the fixup index as ALC861_FIXUP_* to follow the standard. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13ALSA: hda - Add codec->no_jack_detect flagTakashi Iwai
Add a new flag to indicate that the codec has no jack-detection cap. This flag should be set for hardwares that have no jack-detect implementation although the codec chip itself supports it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13ALSA: hda - Make is_jack_detectable() as non-inlinedTakashi Iwai
It's a bit too big and used too often as an inline function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-13Merge branch 'fix/hda' into topic/hdaTakashi Iwai
Necessary for working on the jack-detection suppression feature.
2012-02-13ARM: omap: resolve nebulous 'Error setting wl12xx data'Russell King
It's useful to print the error code when a called function fails so a diagnosis of why it failed is possible. In this case, it fails because we try to register some data for the wl12xx driver, but as the driver is not configured, a stub function is used which simply returns -ENOSYS. Let's do the simple thing for -rc and print the error code. Also, the return code from platform_register_device() at each of these sites was not being checked. Add some checking, and again print the error code. This should be fixed properly for the next merge window so we don't issue error messages merely because a driver is not configured. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-13ARM: omap: fix wrapped error messages in omap_hwmod.cRussell King
While trying to debug my OMAP platforms, they emitted this message: omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state The following backtrace said it was from a function called '_enable', which didn't provide much clue. Grepping didn't find it either. The message is wrapped, so unwrap the message so grep can find it. Do the same for three other messages in this file. Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-13ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.cRussell King
The previous commit causes new section mismatch warnings: WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb30): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio() The function omap_init_hsmmc() references the function __init omap_mux_init_gpio(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_gpio is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb4c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio() The function omap_init_hsmmc() references the function __init omap_mux_init_gpio(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_gpio is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb60): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb6c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb78): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb90): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb9c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdba8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbc0): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbcc): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbd8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbf8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc04): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc10): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc28): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc34): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc40): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc58): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc64): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc70): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc7c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. Again, as for omap2_hsmmc_init(), these functions are callable at runtime via the gpio-twl4030.c driver, and so these can't be marked __init. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-13ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup()Russell King
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xd0f0): Section mismatch in reference from the function sdp3430_twl_gpio_setup() to the function .init.text:omap2_hsmmc_init() The function sdp3430_twl_gpio_setup() references the function __init omap2_hsmmc_init(). This is often because sdp3430_twl_gpio_setup lacks a __init annotation or the annotation of omap2_hsmmc_init is wrong. sdp3430_twl_gpio_setup() is called via platform data from the gpio-twl4030 module, which can be inserted and removed at runtime. This makes sdp3430_twl_gpio_setup() callable at runtime, and prevents it being marked with an __init annotation. As it calls omap2_hsmmc_init() unconditionally, the only resolution to this warning is to remove the __init markings from omap2_hsmmc_init() and its called functions. This addresses the functions in hsmmc.c. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-13ARM: omap: fix section mismatch error for omap_4430sdp_display_init()Russell King
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xb798): Section mismatch in reference from the function omap_4430sdp_display_init() to the function .init.text:omap_display_init() The function omap_4430sdp_display_init() references the function __init omap_display_init(). This is often because omap_4430sdp_display_init lacks a __init annotation or the annotation of omap_display_init is wrong. Fix this by adding __init to omap_4430sdp_display_init(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-13ARM: omap: fix section mismatch warning for omap_secondary_startup()Russell King
WARNING: vmlinux.o(.text+0x1c664): Section mismatch in reference from the function omap_secondary_startup() to the function .cpuinit.text:secondary_startup() The function omap_secondary_startup() references the function __cpuinit secondary_startup(). This is often because omap_secondary_startup lacks a __cpuinit annotation or the annotation of secondary_startup is wrong. Unfortunately, fixing this causes a new warning which is harder to solve: WARNING: arch/arm/mach-omap2/built-in.o(.text+0x5328): Section mismatch in reference from the function omap4_hotplug_cpu() to the function .cpuinit.text:omap_secondary_startup() The function omap4_hotplug_cpu() references the function __cpuinit omap_secondary_startup(). This is often because omap4_hotplug_cpu lacks a __cpuinit annotation or the annotation of omap_secondary_startup is wrong. because omap4_hotplug_cpu() is used by power management code as well, which may not end up using omap_secondary_startup(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-13ARM: omap: preemptively fix section mismatch in omap4_sdp4430_wifi_mux_init()Russell King
Found by review. omap4_sdp4430_wifi_mux_init() is called by an __init marked function, and only calls omap_mux_init_gpio() and omap_mux_init_signal() which are both also an __init marked functions. The only reason this doesn't issue a warning is because the compiler inlines omap4_sdp4430_wifi_mux_init() into omap4_sdp4430_wifi_init(). So, lets add the __init annotation to ensure this remains safe should the compiler choose not to inline. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-13ARM: omap: fix section mismatch warning in mux.cRussell King
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x15a4): Section mismatch in reference from the function omap_mux_init_signals() to the function .init.text:omap_mux_init_signal() The function omap_mux_init_signals() references the function __init omap_mux_init_signal(). This is often because omap_mux_init_signals lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-13ARM: omap: fix section mismatch errors in TWL PMIC driverRussell King
WARNING: drivers/mfd/built-in.o(.devinit.text+0x258): Section mismatch in reference from the function twl_probe() to the function .init.text:twl4030_power_init() The function __devinit twl_probe() references a function __init twl4030_power_init(). If twl4030_power_init is only used by twl_probe then annotate twl4030_power_init with a matching annotation. twl4030_power_init() references other __init marked functions, so these too must become __devinit. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 08:31:19 +0000