summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-14block: do not reverse request order when flushing plug listJan Kara
Commit 26fed4ac4eab ("block: flush plug based on hardware and software queue order") changed flushing of plug list to submit requests one device at a time. However while doing that it also started using list_add_tail() instead of list_add() used previously thus effectively submitting requests in reverse order. Also when forming a rq_list with remaining requests (in case two or more devices are used), we effectively reverse the ordering of the plug list for each device we process. Submitting requests in reverse order has negative impact on performance for rotational disks (when BFQ is not in use). We observe 10-25% regression in random 4k write throughput, as well as ~20% regression in MariaDB OLTP benchmark on rotational storage on btrfs filesystem. Fix the problem by preserving ordering of the plug list when inserting requests into the queuelist as well as by appending to requeue_list instead of prepending to it. Fixes: 26fed4ac4eab ("block: flush plug based on hardware and software queue order") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230313093002.11756-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-14drm/amdgpu/vcn: Disable indirect SRAM on Vangogh broken BIOSesGuilherme G. Piccoli
The VCN firmware loading path enables the indirect SRAM mode if it's advertised as supported. We might have some cases of FW issues that prevents this mode to working properly though, ending-up in a failed probe. An example below, observed in the Steam Deck: [...] [drm] failed to load ucode VCN0_RAM(0x3A) [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0000) amdgpu 0000:04:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vcn_dec_0 test failed (-110) [drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <vcn_v3_0> failed -110 amdgpu 0000:04:00.0: amdgpu: amdgpu_device_ip_init failed amdgpu 0000:04:00.0: amdgpu: Fatal error during GPU init [...] Disabling the VCN block circumvents this, but it's a very invasive workaround that turns off the entire feature. So, let's add a quirk on VCN loading that checks for known problematic BIOSes on Vangogh, so we can proactively disable the indirect SRAM mode and allow the HW proper probe and VCN IP block to work fine. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2385 Fixes: 82132ecc5432 ("drm/amdgpu: enable Vangogh VCN indirect sram mode") Cc: stable@vger.kernel.org Cc: James Zhu <James.Zhu@amd.com> Cc: Leo Liu <leo.liu@amd.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdgpu/nv: fix codec array for SR_IOVAlex Deucher
Copy paste error. Fixes: 384334120b66 ("drm/amdgpu/nv: don't expose AV1 if VCN0 is harvested") Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4454 Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Write to correct dirty_rectBenjamin Cheng
When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does not use the counter i. This causes the fill_dc_dity_rect() to always fill dirty_rects[0], causing graphical artifacts when a damage clip aware DRM client sends more than 1 damage clip. Instead, use the flip_addrs->dirty_rect_count which is incremented by fill_dc_dirty_rect() on a successful fill. Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453 Signed-off-by: Benjamin Cheng <ben@bcheng.me> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-03-14drm/amdgpu: move poll enabled/disable into non DC pathGuchun Chen
Some amd asics having reliable hotplug support don't call drm_kms_helper_poll_init in driver init sequence. However, due to the unified suspend/resume path for all asics, because the output_poll_work->func is not set for these asics, a warning arrives when suspending. [ 90.656049] <TASK> [ 90.656050] ? console_unlock+0x4d/0x100 [ 90.656053] ? __irq_work_queue_local+0x27/0x60 [ 90.656056] ? irq_work_queue+0x2b/0x50 [ 90.656057] ? __wake_up_klogd+0x40/0x60 [ 90.656059] __cancel_work_timer+0xed/0x180 [ 90.656061] drm_kms_helper_poll_disable.cold+0x1f/0x2c [drm_kms_helper] [ 90.656072] amdgpu_device_suspend+0x81/0x170 [amdgpu] [ 90.656180] amdgpu_pmops_runtime_suspend+0xb5/0x1b0 [amdgpu] [ 90.656269] pci_pm_runtime_suspend+0x61/0x1b0 drm_kms_helper_poll_enable/disable is valid when poll_init is called in amdgpu code, which is only used in non DC path. So move such codes into non-DC path code to get rid of such warnings. v1: introduce use_kms_poll flag in amdgpu as the poll stuff check v2: use dc_enabled as the flag to simply code v3: move code into non DC path instead of relying on any flag Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2411 Fixes: a4e771729a51 ("drm/probe_helper: sort out poll_running vs poll_enabled") Reported-by: Bert Karwatzki <spasswolf@web.de> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-03-14drm/amd/display: Fix HDCP failing to enable after suspendBhawanpreet Lakha
[Why] On resume some displays are not ready for HDCP, so they will fail if we start the hdcp authentintication too soon. Add a delay so that the displays can be ready before we start. NOTE: Previoulsy this delay was set to 3 seconds but it was causing issues with compliance, 2 seconds should enough for compliance and the s3 resume case. [How] Change the Delay to 2 seconds. Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdkfd: fix potential kgd_mem UAFsChia-I Wu
kgd_mem pointers returned by kfd_process_device_translate_handle are only guaranteed to be valid while p->mutex is held. As soon as the mutex is unlocked, another thread can free the BO. Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdgpu/vcn: custom video info caps for sriovJane Jian
for sriov, we added a new flag to indicate av1 support, this will override the original caps info. Signed-off-by: Jane Jian <Jane.Jian@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/pm: Fix sienna cichlid incorrect OD volage after resumeBłażej Szczygieł
Always setup overdrive tables after resume. Preserve only some user-defined settings in user_overdrive_table if they're set. Copy restored user_overdrive_table into od_table to get correct values. On cold boot, BTC was triggered and GfxVfCurve was calibrated. We got VfCurve settings (a). On resuming back, BTC will be triggered again and GfxVfCurve will be recalibrated. VfCurve settings (b) got may be different from those of cold boot. So if we reuse those VfCurve settings (a) got on cold boot on suspend, we can run into discrepencies. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1897 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2276 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Błażej Szczygieł <mumei6102@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-03-14drm/amd/pm: bump SMU 13.0.4 driver_if header versionTim Huang
Align the SMU driver interface version with PMFW to suppress the version mismatch message on driver loading. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-03-14drm/amdkfd: fix a potential double free in pqm_create_queueChia-I Wu
Set *q to NULL on errors, otherwise pqm_create_queue would free it again. Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdkfd: Get prange->offset after svm_range_vram_node_newXiaogang Chen
During miration to vram prange->offset is valid after vram buffer is located, either use old one or allocate a new one. Move svm_range_vram_node_new before migrate for each vma to get valid prange->offset. v2: squash in warning fix Fixes: b4ee9606378b ("drm/amdkfd: Fix BO offset for multi-VMA page migration") Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdkfd: Fix BO offset for multi-VMA page migrationXiaogang Chen
svm_migrate_ram_to_vram migrates a prange from sys ram to vram. The prange may cross multiple vma. Need remember current dst vram offset in the TTM resource for each migration. v2: squash in warning fix (Alex) Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14x86/PVH: obtain VGA console info in Dom0Jan Beulich
A new platform-op was added to Xen to allow obtaining the same VGA console information PV Dom0 is handed. Invoke the new function and have the output data processed by xen_init_vga(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/8f315e92-7bda-c124-71cc-478ab9c5e610@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-03-14KVM: selftests: Sync KVM exit reasons in selftestsVipin Sharma
Add missing KVM_EXIT_* reasons in KVM selftests from include/uapi/linux/kvm.h Signed-off-by: Vipin Sharma <vipinsh@google.com> Message-Id: <20230204014547.583711-5-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Add macro to generate KVM exit reason stringsSean Christopherson
Add and use a macro to generate the KVM exit reason strings array instead of relying on developers to correctly copy+paste+edit each string. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204014547.583711-4-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Print expected and actual exit reason in KVM exit reason assertVipin Sharma
Print what KVM exit reason a test was expecting and what it actually got int TEST_ASSERT_KVM_EXIT_REASON(). Signed-off-by: Vipin Sharma <vipinsh@google.com> Message-Id: <20230204014547.583711-3-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Make vCPU exit reason test assertion commonVipin Sharma
Make TEST_ASSERT_KVM_EXIT_REASON() macro and replace all exit reason test assert statements with it. No functional changes intended. Signed-off-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: David Matlack <dmatlack@google.com> Message-Id: <20230204014547.583711-2-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Add EVTCHNOP_send slow path test to xen_shinfo_testDavid Woodhouse
When kvm_xen_evtchn_send() takes the slow path because the shinfo GPC needs to be revalidated, it used to violate the SRCU vs. kvm->lock locking rules and potentially cause a deadlock. Now that lockdep is learning to catch such things, make sure that code path is exercised by the selftest. Link: https://lore.kernel.org/all/20230113124606.10221-2-dwmw2@infradead.org Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204024151.1373296-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Use enum for test numbers in xen_shinfo_testDavid Woodhouse
The xen_shinfo_test started off with very few iterations, and the numbers we used in GUEST_SYNC() were precisely mapped to the RUNSTATE_xxx values anyway to start with. It has since grown quite a few more tests, and it's kind of awful to be handling them all as bare numbers. Especially when I want to add a new test in the middle. Define an enum for the test stages, and use it both in the guest code and the host switch statement. No functional change, if I can count to 24. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204024151.1373296-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Add helpers to make Xen-style VMCALL/VMMCALL hypercallsSean Christopherson
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI (as opposed to full Xen-style hypercalls through a hypervisor provided page). Using the common helpers dedups a pile of code, and uses the native hypercall instruction when running on AMD. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204024151.1373296-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Move the guts of kvm_hypercall() to a separate macroSean Christopherson
Extract the guts of kvm_hypercall() to a macro so that Xen hypercalls, which have a different register ABI, can reuse the VMCALL vs. VMMCALL logic. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204024151.1373296-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: SVM: WARN if GATag generation drops VM or vCPU ID informationSean Christopherson
WARN if generating a GATag given a VM ID and vCPU ID doesn't yield the same IDs when pulling the IDs back out of the tag. Don't bother adding error handling to callers, this is very much a paranoid sanity check as KVM fully controls the VM ID and is supposed to reject too-big vCPU IDs. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20230207002156.521736-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: SVM: Modify AVIC GATag to support max number of 512 vCPUsSuravee Suthikulpanit
Define AVIC_VCPU_ID_MASK based on AVIC_PHYSICAL_MAX_INDEX, i.e. the mask that effectively controls the largest guest physical APIC ID supported by x2AVIC, instead of hardcoding the number of bits to 8 (and the number of VM bits to 24). The AVIC GATag is programmed into the AMD IOMMU IRTE to provide a reference back to KVM in case the IOMMU cannot inject an interrupt into a non-running vCPU. In such a case, the IOMMU notifies software by creating a GALog entry with the corresponded GATag, and KVM then uses the GATag to find the correct VM+vCPU to kick. Dropping bit 8 from the GATag results in kicking the wrong vCPU when targeting vCPUs with x2APIC ID > 255. Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode") Cc: stable@vger.kernel.org Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20230207002156.521736-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: SVM: Fix a benign off-by-one bug in AVIC physical table maskSean Christopherson
Define the "physical table max index mask" as bits 8:0, not 9:0. x2AVIC currently supports a max of 512 entries, i.e. the max index is 511, and the inputs to GENMASK_ULL() are inclusive. The bug is benign as bit 9 is reserved and never set by KVM, i.e. KVM is just clearing bits that are guaranteed to be zero. Note, as of this writing, APM "Rev. 3.39-October 2022" incorrectly states that bits 11:8 are reserved in Table B-1. VMCB Layout, Control Area. I.e. that table wasn't updated when x2AVIC support was added. Opportunistically fix the comment for the max AVIC ID to align with the code, and clean up comment formatting too. Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode") Cc: stable@vger.kernel.org Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20230207002156.521736-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14selftests: KVM: skip hugetlb tests if huge pages are not availablePaolo Bonzini
Right now, if KVM memory stress tests are run with hugetlb sources but hugetlb is not available (either in the kernel or because /proc/sys/vm/nr_hugepages is 0) the test will fail with a memory allocation error. This makes it impossible to add tests that default to hugetlb-backed memory, because on a machine with a default configuration they will fail. Therefore, check HugePages_Total as well and, if zero, direct the user to enable hugepages in procfs. Furthermore, return KSFT_SKIP whenever hugetlb is not available. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: VMX: Use tabs instead of spaces for indentationRong Tao
Code indentation should use tabs where possible and miss a '*'. Signed-off-by: Rong Tao <rongtao@cestc.cn> Message-Id: <tencent_A492CB3F9592578451154442830EA1B02C07@qq.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: VMX: Fix indentation coding style issueRong Tao
Code indentation should use tabs where possible. Signed-off-by: Rong Tao <rongtao@cestc.cn> Message-Id: <tencent_31E6ACADCB6915E157CF5113C41803212107@qq.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: nVMX: remove unnecessary #ifdefPaolo Bonzini
nested_vmx_check_controls() has already run by the time KVM checks host state, so the "host address space size" exit control can only be set on x86-64 hosts. Simplify the condition at the cost of adding some dead code to 32-bit kernels. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: nVMX: add missing consistency checks for CR0 and CR4Paolo Bonzini
The effective values of the guest CR0 and CR4 registers may differ from those included in the VMCS12. In particular, disabling EPT forces CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1. Therefore, checks on these bits cannot be delegated to the processor and must be performed by KVM. Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14Merge tag 'kvmarm-fixes-6.3-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.3, part #1 A single patch to address a rather annoying bug w.r.t. guest timer offsetting. Effectively the synchronization of timer offsets between vCPUs was broken, leading to inconsistent timer reads within the VM.
2023-03-14powerpc/pseries: RTAS work area requires GENERIC_ALLOCATORRandy Dunlap
The RTAS work area allocator uses code that is built by GENERIC_ALLOCATOR, so the PSERIES Kconfig should select the required Kconfig symbol to fix multiple build errors. powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_allocator_init': rtas-work-area.c:(.init.text+0x288): undefined reference to `.gen_pool_create' powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x2dc): undefined reference to `.gen_pool_set_algo' powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x310): undefined reference to `.gen_pool_add_owner' powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x43c): undefined reference to `.gen_pool_destroy' powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o:(.toc+0x0): undefined reference to `gen_pool_first_fit_order_align' powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.__rtas_work_area_alloc': rtas-work-area.c:(.ref.text+0x14c): undefined reference to `.gen_pool_alloc_algo_owner' powerpc64-linux-ld: rtas-work-area.c:(.ref.text+0x238): undefined reference to `.gen_pool_alloc_algo_owner' powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_free': rtas-work-area.c:(.ref.text+0x44c): undefined reference to `.gen_pool_free_owner' Fixes: 43033bc62d34 ("powerpc/pseries: add RTAS work area allocator") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
2023-03-13net: ipa: fix a surprising number of bad offsetsAlex Elder
A recent commit eliminated a hack that adjusted the offset used for many GSI registers. It became possible because we now specify all GSI register offsets explicitly for every version of IPA. Unfortunately, a large number of register offsets were *not* updated as they should have been in that commit. For IPA v4.5+, the offset for every GSI register *except* the two inter-EE interrupt masking registers were supposed to have been reduced by 0xd000. Tested-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK Fixes: 59b12b1d27f3 ("net: ipa: kill gsi->virt_raw") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230310193709.1477102-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: dsa: mt7530: set PLL frequency and trgmii only when trgmii is usedArınç ÜNAL
As my testing on the MCM MT7530 switch on MT7621 SoC shows, setting the PLL frequency does not affect MII modes other than trgmii on port 5 and port 6. So the assumption is that the operation here called "setting the PLL frequency" actually sets the frequency of the TRGMII TX clock. Make it so that it and the rest of the trgmii setup run only when the trgmii mode is used. Tested rgmii and trgmii modes of port 6 on MCM MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI Bananapi BPI-R2. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230310073338.5836-2-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: dsa: mt7530: remove now incorrect comment regarding port 5Arınç ÜNAL
Remove now incorrect comment regarding port 5 as GMAC5. This is supposed to be supported since commit 38f790a80560 ("net: dsa: mt7530: Add support for port 5") under mt7530_setup_port5(). Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230310073338.5836-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13qed/qed_dev: guard against a possible division by zeroDaniil Tatianin
Previously we would divide total_left_rate by zero if num_vports happened to be 1 because non_requested_count is calculated as num_vports - req_count. Guard against this by validating num_vports at the beginning and returning an error otherwise. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: bcd197c81f63 ("qed: Add vport WFQ configuration APIs") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309201556.191392-1-d-tatianin@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()D. Wythe
When performing a stress test on SMC-R by rmmod mlx5_ib driver during the wrk/nginx test, we found that there is a probability of triggering a panic while terminating all link groups. This issue dues to the race between smc_smcr_terminate_all() and smc_buf_create(). smc_smcr_terminate_all smc_buf_create /* init */ conn->sndbuf_desc = NULL; ... __smc_lgr_terminate smc_conn_kill smc_close_abort smc_cdc_get_slot_and_msg_send __softirqentry_text_start smc_wr_tx_process_cqe smc_cdc_tx_handler READ(conn->sndbuf_desc->len); /* panic dues to NULL sndbuf_desc */ conn->sndbuf_desc = xxx; This patch tries to fix the issue by always to check the sndbuf_desc before send any cdc msg, to make sure that no null pointer is seen during cqe processing. Fixes: 0b29ec643613 ("net/smc: immediate termination for SMCR link groups") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/1678263432-17329-1-git-send-email-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13bnxt_en: reset PHC frequency in free-running modeVadim Fedorenko
When using a PHC in shared between multiple hosts, the previous frequency value may not be reset and could lead to host being unable to compensate the offset with timecounter adjustments. To avoid such state reset the hardware frequency of PHC to zero on init. Some refactoring is needed to make code readable. Fixes: 85036aee1938 ("bnxt_en: Add a non-real time mode to access NIC clock") Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230310151356.678059-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13md: avoid signed overflow in slot_store()NeilBrown
slot_store() uses kstrtouint() to get a slot number, but stores the result in an "int" variable (by casting a pointer). This can result in a negative slot number if the unsigned int value is very large. A negative number means that the slot is empty, but setting a negative slot number this way will not remove the device from the array. I don't think this is a serious problem, but it could cause confusion and it is best to fix it. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <song@kernel.org>
2023-03-13memory: tegra30-emc: fix interconnect registration raceJohan Hovold
The current interconnect provider registration interface is inherently racy as nodes are not added until the after adding the provider. This can specifically cause racing DT lookups to fail. Switch to using the new API where the provider is not registered until after it has been fully initialised. Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework") Cc: stable@vger.kernel.org # 5.11 Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-21-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13memory: tegra20-emc: fix interconnect registration raceJohan Hovold
The current interconnect provider registration interface is inherently racy as nodes are not added until the after adding the provider. This can specifically cause racing DT lookups to fail. Switch to using the new API where the provider is not registered until after it has been fully initialised. Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework") Cc: stable@vger.kernel.org # 5.11 Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-20-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13memory: tegra124-emc: fix interconnect registration raceJohan Hovold
The current interconnect provider registration interface is inherently racy as nodes are not added until the after adding the provider. This can specifically cause racing DT lookups to fail. Switch to using the new API where the provider is not registered until after it has been fully initialised. Fixes: 380def2d4cf2 ("memory: tegra124: Support interconnect framework") Cc: stable@vger.kernel.org # 5.12 Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-19-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13memory: tegra: fix interconnect registration raceJohan Hovold
The current interconnect provider registration interface is inherently racy as nodes are not added until the after adding the provider. This can specifically cause racing DT lookups to fail. Switch to using the new API where the provider is not registered until after it has been fully initialised. Fixes: 06f079816d4c ("memory: tegra-mc: Add interconnect framework") Cc: stable@vger.kernel.org # 5.11 Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-18-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13interconnect: exynos: drop redundant link destroyJohan Hovold
There is no longer any need to explicitly destroy node links as this is now done when the node is destroyed as part of icc_nodes_remove(). Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-17-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13interconnect: exynos: fix registration raceJohan Hovold
The current interconnect provider registration interface is inherently racy as nodes are not added until the after adding the provider. This can specifically cause racing DT lookups to trigger a NULL-pointer deference when either a NULL pointer or not fully initialised node is returned from exynos_generic_icc_xlate(). Switch to using the new API where the provider is not registered until after it has been fully initialised. Fixes: 2f95b9d5cf0b ("interconnect: Add generic interconnect driver for Exynos SoCs") Cc: stable@vger.kernel.org # 5.11 Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-16-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13interconnect: exynos: fix node leak in probe PM QoS error pathJohan Hovold
Make sure to add the newly allocated interconnect node to the provider before adding the PM QoS request so that the node is freed on errors. Fixes: 2f95b9d5cf0b ("interconnect: Add generic interconnect driver for Exynos SoCs") Cc: stable@vger.kernel.org # 5.11 Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-15-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13interconnect: qcom: msm8974: fix registration raceJohan Hovold
The current interconnect provider registration interface is inherently racy as nodes are not added until the after adding the provider. This can specifically cause racing DT lookups to fail. Switch to using the new API where the provider is not registered until after it has been fully initialised. Fixes: 4e60a9568dc6 ("interconnect: qcom: add msm8974 driver") Cc: stable@vger.kernel.org # 5.5 Reviewed-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-12-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13interconnect: qcom: rpmh: fix registration raceJohan Hovold
The current interconnect provider registration interface is inherently racy as nodes are not added until the after adding the provider. This can specifically cause racing DT lookups to fail. Switch to using the new API where the provider is not registered until after it has been fully initialised. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Cc: stable@vger.kernel.org # 5.7 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-11-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13interconnect: qcom: rpmh: fix probe child-node error handlingJohan Hovold
Make sure to clean up and release resources properly also in case probe fails when populating child devices. Fixes: 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child NoC device probe") Cc: stable@vger.kernel.org # 6.0 Cc: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-10-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-03-13interconnect: qcom: rpm: fix registration raceJohan Hovold
The current interconnect provider registration interface is inherently racy as nodes are not added until the after adding the provider. This can specifically cause racing DT lookups to fail. Switch to using the new API where the provider is not registered until after it has been fully initialised. Fixes: 62feb14ee8a3 ("interconnect: qcom: Consolidate interconnect RPM support") Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver") Cc: stable@vger.kernel.org # 5.7 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230306075651.2449-9-johan+linaro@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 01:40:31 +0000