summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-13scsi: pm80xx: Avoid leaking tags when processing ↵Michal Grzedzicki
OPC_INB_SET_CONTROLLER_CONFIG command Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed when we receive the response. Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: pm80xx: Use phy-specific SAS address when sending PHY_START commandMichal Grzedzicki
Some cards have more than one SAS address. Using an incorrect address causes communication issues with some devices like expanders. Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@fb.com/ Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13Merge branch '6.6/scsi-staging' into 6.6/scsi-fixesMartin K. Petersen
Pull in staged fixes for 6.6. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13ASoC: cs42l42: Fix handling of hard resetMark Brown
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>: These patches fix 3 problems with hard reset: 1. Ensure a minimum reset pulse width 2. Deal with ACPI overriding the requested default GPIO state 3. Avoid a race condition when hard-resetting a SoundWire peripheral that is already enumerated
2023-09-13Merge tag 'pmdomain-v6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull genpm / pmdomain rename from Ulf Hansson: "This renames the genpd subsystem to pmdomain. As discussed on LKML, using 'genpd' as the name of a subsystem isn't very self-explanatory and the acronym itself that means Generic PM Domain, is known only by a limited group of people. The suggestion to improve the situation is to rename the subsystem to 'pmdomain', which there seems to be a good consensus around using. Ideally it should indicate that its purpose is to manage Power Domains or 'PM domains' as we often also use within the Linux Kernel terminology" * tag 'pmdomain-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: Rename the genpd subsystem to pmdomain
2023-09-13selftests: netfilter: Test nf_tables audit loggingPhil Sutter
Compare NETFILTER_CFG type audit logs emitted from kernel upon ruleset modifications against expected output. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-09-13netfilter: nf_tables: Fix entries val in rule reset audit logPhil Sutter
The value in idx and the number of rules handled in that particular __nf_tables_dump_rules() call is not identical. The former is a cursor to pick up from if multiple netlink messages are needed, so its value is ever increasing. Fixing this is not just a matter of subtracting s_idx from it, though: When resetting rules in multiple chains, __nf_tables_dump_rules() is called for each and cb->args[0] is not adjusted in between. Introduce a dedicated counter to record the number of rules reset in this call in a less confusing way. While being at it, prevent the direct return upon buffer exhaustion: Any rules previously dumped into that skb would evade audit logging otherwise. Fixes: 9b5ba5c9c5109 ("netfilter: nf_tables: Unbreak audit log reset") Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-09-13netfilter: conntrack: fix extension size tableFlorian Westphal
The size table is incorrect due to copypaste error, this reserves more size than needed. TSTAMP reserved 32 instead of 16 bytes. TIMEOUT reserved 16 instead of 8 bytes. Fixes: 5f31edc0676b ("netfilter: conntrack: move extension sizes into core") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-09-13selftests/bpf: Fix kprobe_multi_test/attach_override testJiri Olsa
We need to deny the attach_override test for arm64, denying the whole kprobe_multi_test suite. Also making attach_override static. Fixes: 7182e56411b9 ("selftests/bpf: Add kprobe_multi override test") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230913114711.499829-1-jolsa@kernel.org
2023-09-13Merge tag 'tpmdd-v6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fix from Jarkko Sakkinen. * tag 'tpmdd-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: Fix typo in tpmrm class definition
2023-09-13Merge tag 'parisc-for-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - fix reference to exported symbols for parisc64 [Masahiro Yamada] - Block-TLB (BTLB) support on 32-bit CPUs - sparse and build-warning fixes * tag 'parisc-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: linux/export: fix reference to exported functions for parisc64 parisc: BTLB: Initialize BTLB tables at CPU startup parisc: firmware: Simplify calling non-PA20 functions parisc: BTLB: _edata symbol has to be page aligned for BTLB support parisc: BTLB: Add BTLB insert and purge firmware function wrappers parisc: BTLB: Clear possibly existing BTLB entries parisc: Prepare for Block-TLB support on 32-bit kernel parisc: shmparam.h: Document aliasing requirements of PA-RISC parisc: irq: Make irq_stack_union static to avoid sparse warning parisc: drivers: Fix sparse warning parisc: iosapic.c: Fix sparse warnings parisc: ccio-dma: Fix sparse warnings parisc: sba-iommu: Fix sparse warnigs parisc: sba: Fix compile warning wrt list of SBA devices parisc: sba_iommu: Fix build warning if procfs if disabled
2023-09-13Merge tag 'trace-v6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Add missing LOCKDOWN checks for eventfs callers When LOCKDOWN is active for tracing, it causes inconsistent state when some functions succeed and others fail. - Use dput() to free the top level eventfs descriptor There was a race between accesses and freeing it. - Fix a long standing bug that eventfs exposed due to changing timings by dynamically creating files. That is, If a event file is opened for an instance, there's nothing preventing the instance from being removed which will make accessing the files cause use-after-free bugs. - Fix a ring buffer race that happens when iterating over the ring buffer while writers are active. Check to make sure not to read the event meta data if it's beyond the end of the ring buffer sub buffer. - Fix the print trigger that disappeared because the test to create it was looking for the event dir field being filled, but now it has the "ef" field filled for the eventfs structure. - Remove the unused "dir" field from the event structure. - Fix the order of the trace_dynamic_info as it had it backwards for the offset and len fields for which one was for which endianess. - Fix NULL pointer dereference with eventfs_remove_rec() If an allocation fails in one of the eventfs_add_*() functions, the caller of it in event_subsystem_dir() or event_create_dir() assigns the result to the structure. But it's assigning the ERR_PTR and not NULL. This was passed to eventfs_remove_rec() which expects either a good pointer or a NULL, not ERR_PTR. The fix is to not assign the ERR_PTR to the structure, but to keep it NULL on error. - Fix list_for_each_rcu() to use list_for_each_srcu() in dcache_dir_open_wrapper(). One iteration of the code used RCU but because it had to call sleepable code, it had to be changed to use SRCU, but one of the iterations was missed. - Fix synthetic event print function to use "as_u64" instead of passing in a pointer to the union. To fix big/little endian issues, the u64 that represented several types was turned into a union to define the types properly. * tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Fix the NULL pointer dereference bug in eventfs_remove_rec() tracefs/eventfs: Use list_for_each_srcu() in dcache_dir_open_wrapper() tracing/synthetic: Print out u64 values properly tracing/synthetic: Fix order of struct trace_dynamic_info selftests/ftrace: Fix dependencies for some of the synthetic event tests tracing: Remove unused trace_event_file dir field tracing: Use the new eventfs descriptor for print trigger ring-buffer: Do not attempt to read past "commit" tracefs/eventfs: Free top level files on removal ring-buffer: Avoid softlockup in ring_buffer_resize() tracing: Have event inject files inc the trace array ref count tracing: Have option files inc the trace array ref count tracing: Have current_trace inc the trace array ref count tracing: Have tracing_max_latency inc the trace array ref count tracing: Increase trace array ref count on enable and filter files tracefs/eventfs: Use dput to free the toplevel events directory tracefs/eventfs: Add missing lockdown checks tracefs: Add missing lockdown check to tracefs_create_dir()
2023-09-13ASoC: wm_adsp: Fix missing locking in wm_adsp_[read|write]_ctl()Richard Fitzgerald
wm_adsp_read_ctl() and wm_adsp_write_ctl() must hold the cs_dsp pwr_lock mutex when calling cs_dsp_coeff_read_ctrl() and cs_dsp_coeff_write_ctrl(). Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230913160250.3700346-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-13firmware: cirrus: cs_dsp: Only log list of algorithms in debug buildRichard Fitzgerald
Change the logging of each algorithm from info level to debug level. On the original devices supported by this code there were typically only one or two algorithms in a firmware and one or two DSPs so this logging only used a small number of log lines. However, for the latest devices there could be 30-40 algorithms in a firmware and 8 DSPs being loaded in parallel, so using 300+ lines of log for information that isn't particularly important to have logged. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230913160523.3701189-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-13btrfs: don't clear uptodate on write errorsJosef Bacik
We have been consistently seeing hangs with generic/648 in our subpage GitHub CI setup. This is a classic deadlock, we are calling btrfs_read_folio() on a folio, which requires holding the folio lock on the folio, and then finding a ordered extent that overlaps that range and calling btrfs_start_ordered_extent(), which then tries to write out the dirty page, which requires taking the folio lock and then we deadlock. The hang happens because we're writing to range [1271750656, 1271767040), page index [77621, 77622], and page 77621 is !Uptodate. It is also Dirty, so we call btrfs_read_folio() for 77621 and which does btrfs_lock_and_flush_ordered_range() for that range, and we find an ordered extent which is [1271644160, 1271746560), page index [77615, 77621]. The page indexes overlap, but the actual bytes don't overlap. We're holding the page lock for 77621, then call btrfs_lock_and_flush_ordered_range() which tries to flush the dirty page, and tries to lock 77621 again and then we deadlock. The byte ranges do not overlap, but with subpage support if we clear uptodate on any portion of the page we mark the entire thing as not uptodate. We have been clearing page uptodate on write errors, but no other file system does this, and is in fact incorrect. This doesn't hurt us in the !subpage case because we can't end up with overlapped ranges that don't also overlap on the page. Fix this by not clearing uptodate when we have a write error. The only thing we should be doing in this case is setting the mapping error and carrying on. This makes it so we would no longer call btrfs_read_folio() on the page as it's uptodate and eliminates the deadlock. With this patch we're now able to make it through a full fstests run on our subpage blocksize VMs. Note for stable backports: this probably goes beyond 6.1 but the code has been cleaned up and clearing the uptodate bit must be verified on each version independently. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-13btrfs: file_remove_privs needs an exclusive lock in direct io writeBernd Schubert
This was noticed by Miklos that file_remove_privs might call into notify_change(), which requires to hold an exclusive lock. The problem exists in FUSE and btrfs. We can fix it without any additional helpers from VFS, in case the privileges would need to be dropped, change the lock type to be exclusive and redo the loop. Fixes: e9adabb9712e ("btrfs: use shared lock for direct writes within EOF") CC: Miklos Szeredi <miklos@szeredi.hu> CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-13btrfs: convert btrfs_read_merkle_tree_page() to use a folioMatthew Wilcox (Oracle)
Remove a number of hidden calls to compound_head() by using a folio throughout. Also follow core kernel coding style by adding the folio to the page cache immediately after allocation instead of doing the read first, then adding it to the page cache. This ordering makes subsequent readers block waiting for the first reader instead of duplicating the work only to throw it away when they find out they lost the race. Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-13NFSv4.1: fix pnfs MDS=DS session trunkingOlga Kornievskaia
Currently, when GETDEVICEINFO returns multiple locations where each is a different IP but the server's identity is same as MDS, then nfs4_set_ds_client() finds the existing nfs_client structure which has the MDS's max_connect value (and if it's 1), then the 1st IP on the DS's list will get dropped due to MDS trunking rules. Other IPs would be added as they fall under the pnfs trunking rules. For the list of IPs the 1st goes thru calling nfs4_set_ds_client() which will eventually call nfs4_add_trunk() and call into rpc_clnt_test_and_add_xprt() which has the check for MDS trunking. The other IPs (after the 1st one), would call rpc_clnt_add_xprt() which doesn't go thru that check. nfs4_add_trunk() is called when MDS trunking is happening and it needs to enforce the usage of max_connect mount option of the 1st mount. However, this shouldn't be applied to pnfs flow. Instead, this patch proposed to treat MDS=DS as DS trunking and make sure that MDS's max_connect limit does not apply to the 1st IP returned in the GETDEVICEINFO list. It does so by marking the newly created client with a new flag NFS_CS_PNFS which then used to pass max_connect value to use into the rpc_clnt_test_and_add_xprt() instead of the existing rpc client's max_connect value set by the MDS connection. For example, mount was done without max_connect value set so MDS's rpc client has cl_max_connect=1. Upon calling into rpc_clnt_test_and_add_xprt() and using rpc client's value, the caller passes in max_connect value which is previously been set in the pnfs path (as a part of handling GETDEVICEINFO list of IPs) in nfs4_set_ds_client(). However, when NFS_CS_PNFS flag is not set and we know we are doing MDS trunking, comparing a new IP of the same server, we then set the max_connect value to the existing MDS's value and pass that into rpc_clnt_test_and_add_xprt(). Fixes: dc48e0abee24 ("SUNRPC enforce creation of no more than max_connect xprts") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-13Revert "SUNRPC: Fail faster on bad verifier"Trond Myklebust
This reverts commit 0701214cd6e66585a999b132eb72ae0489beb724. The premise of this commit was incorrect. There are exactly 2 cases where rpcauth_checkverf() will return an error: 1) If there was an XDR decode problem (i.e. garbage data). 2) If gss_validate() had a problem verifying the RPCSEC_GSS MIC. In the second case, there are again 2 subcases: a) The GSS context expires, in which case gss_validate() will force a new context negotiation on retry by invalidating the cred. b) The sequence number check failed because an RPC call timed out, and the client retransmitted the request using a new sequence number, as required by RFC2203. In neither subcase is this a fatal error. Reported-by: Russell Cattelan <cattelan@thebarn.com> Fixes: 0701214cd6e6 ("SUNRPC: Fail faster on bad verifier") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-13SUNRPC: Mark the cred for revalidation if the server rejects itTrond Myklebust
If the server rejects the credential as being stale, or bad, then we should mark it for revalidation before retransmitting. Fixes: 7f5667a5f8c4 ("SUNRPC: Clean up rpc_verify_header()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-13NFS/pNFS: Report EINVAL errors from connect() to the serverTrond Myklebust
With IPv6, connect() can occasionally return EINVAL if a route is unavailable. If this happens during I/O to a data server, we want to report it using LAYOUTERROR as an inability to connect. Fixes: dd52128afdde ("NFSv4.1/pnfs Ensure flexfiles reports all connection related errors") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-13NFS: More fixes for nfs_direct_write_reschedule_io()Trond Myklebust
Ensure that all requests are put back onto the commit list so that they can be rescheduled. Fixes: 4daaeba93822 ("NFS: Fix nfs_direct_write_reschedule_io()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-13NFS: Use the correct commit info in nfs_join_page_group()Trond Myklebust
Ensure that nfs_clear_request_commit() updates the correct counters when it removes them from the commit list. Fixes: ed5d588fe47f ("NFS: Try to join page groups before an O_DIRECT retransmission") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-13NFS: More O_DIRECT accounting fixes for error pathsTrond Myklebust
If we hit a fatal error when retransmitting, we do need to record the removal of the request from the count of written bytes. Fixes: 031d73ed768a ("NFS: Fix O_DIRECT accounting of number of bytes read/written") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-13NFS: Fix O_DIRECT locking issuesTrond Myklebust
The dreq fields are protected by the dreq->lock. Fixes: 954998b60caa ("NFS: Fix error handling for O_DIRECT write scheduling") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-09-13ksmbd: fix passing freed memory 'aux_payload_buf'Namjae Jeon
The patch e2b76ab8b5c9: "ksmbd: add support for read compound" leads to the following Smatch static checker warning: fs/smb/server/smb2pdu.c:6329 smb2_read() warn: passing freed memory 'aux_payload_buf' It doesn't matter that we're passing a freed variable because nbytes is zero. This patch set "aux_payload_buf = NULL" to make smatch silence. Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-13ksmbd: remove unneeded mark_inode_dirty in set_info_sec()Namjae Jeon
mark_inode_dirty will be called in notify_change(). This patch remove unneeded mark_inode_dirty in set_info_sec(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-13ASoC: cs42l42: Avoid stale SoundWire ATTACH after hard resetRichard Fitzgerald
In SoundWire mode leave hard RESET asserted when exiting probe, and wait for an UNATTACHED notification before deasserting RESET. If the boot state of the reset GPIO was deasserted it is possible that the SoundWire core had already enumerated the CS42L42 before cs42l42_sdw_probe() is called. When cs42l42_common_probe() hard resets the CS42L42 it triggers a race condition: 1) After cs42l42_sdw_probe() returns the thread that called it will call cs42l42_sdw_update_status() to report the last status recorded by the SoundWire core. 2) The SoundWire bus master will see a PING with the CS42L42 now reporting as unenumerated and will trigger the core SoundWire code to start enumerating CS42L42. These two threads are racing against each other. If (1) happens before (2) a stale ATTACHED notification will be reported to the cs42l42 driver when in fact the status of cs42l42 is now unattached. To avoid this race condition: - Leave RESET asserted on exit from cs42l42_sdw_probe(). This ensures that an UNATTACHED notification must be sent to the cs42l42 driver. If cs42l42 was already enumerated it will be seen to drop off the bus, causing an UNATTACH notification. If it was never enumerated the status is already UNATTACHED and this will be reported by thread (1). - When the UNATTACH notification is received, release RESET. This will cause CS42L42 to be enumerated and eventually report an ATTACHED notification. - The ATTACHED notification is now valid. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230913150012.604775-4-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-13ASoC: cs42l42: Don't rely on GPIOD_OUT_LOW to set RESET initially lowRichard Fitzgerald
The ACPI setting for a GPIO default state has higher priority than the flag passed to devm_gpiod_get_optional() so ACPI can override the GPIOD_OUT_LOW. Explicitly set the GPIO low when hard resetting. Although GPIOD_OUT_LOW can't be relied on this doesn't seem like a reason to stop passing it to devm_gpiod_get_optional(). So we still pass it to state our intent, but can deal with it having no effect. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230913150012.604775-3-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-13ASoC: cs42l42: Ensure a reset pulse meets minimum pulse width.Richard Fitzgerald
The CS42L42 can accept very short reset pulses of a few microseconds but there's no reason to force a very short pulse. Allow a wide range for the usleep_range() so it can be relaxed about the choice of timing source. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230913150012.604775-2-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-13x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domainRicardo Neri
Commit 8f2d6c41e5a6 ("x86/sched: Rewrite topology setup") dropped the SD_ASYM_PACKING flag in the DIE domain added in commit 044f0e27dec6 ("x86/sched: Add the SD_ASYM_PACKING flag to the die domain of hybrid processors"). Restore it on hybrid processors. The die-level domain does not depend on any build configuration and now x86_sched_itmt_flags() is always needed. Remove the build dependency on CONFIG_SCHED_[SMT|CLUSTER|MC]. Fixes: 8f2d6c41e5a6 ("x86/sched: Rewrite topology setup") Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Caleb Callaway <caleb.callaway@intel.com> Link: https://lkml.kernel.org/r/20230815035747.11529-1-ricardo.neri-calderon@linux.intel.com
2023-09-13sched/fair: Fix SMT4 group_smt_balance handlingTim Chen
For SMT4, any group with more than 2 tasks will be marked as group_smt_balance. Retain the behaviour of group_has_spare by marking the busiest group as the group which has the least number of idle_cpus. Also, handle rounding effect of adding (ncores_local + ncores_busy) when the local is fully idle and busy group imbalance is less than 2 tasks. Local group should try to pull at least 1 task in this case so imbalance should be set to 2 instead. Fixes: fee1759e4f04 ("sched/fair: Determine active load balance for SMT sched groups") Acked-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/6cd1633036bb6b651af575c32c2a9608a106702c.camel@linux.intel.com
2023-09-13ASoC: codecs: aw88395: Fix some error codesDan Carpenter
These error paths should return -EINVAL instead of success. Fixes: 7f4ec77802aa ("ASoC: codecs: Add code for bin parsing compatible with aw88261") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/81476e78-05c2-4656-b754-f314c7ccdb81@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-13igb: clean up in all error paths when enabling SR-IOVCorinna Vinschen
After commit 50f303496d92 ("igb: Enable SR-IOV after reinit"), removing the igb module could hang or crash (depending on the machine) when the module has been loaded with the max_vfs parameter set to some value != 0. In case of one test machine with a dual port 82580, this hang occurred: [ 232.480687] igb 0000:41:00.1: removed PHC on enp65s0f1 [ 233.093257] igb 0000:41:00.1: IOV Disabled [ 233.329969] pcieport 0000:40:01.0: AER: Multiple Uncorrected (Non-Fatal) err0 [ 233.340302] igb 0000:41:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fata) [ 233.352248] igb 0000:41:00.0: device [8086:1516] error status/mask=00100000 [ 233.361088] igb 0000:41:00.0: [20] UnsupReq (First) [ 233.368183] igb 0000:41:00.0: AER: TLP Header: 40000001 0000040f cdbfc00c c [ 233.376846] igb 0000:41:00.1: PCIe Bus Error: severity=Uncorrected (Non-Fata) [ 233.388779] igb 0000:41:00.1: device [8086:1516] error status/mask=00100000 [ 233.397629] igb 0000:41:00.1: [20] UnsupReq (First) [ 233.404736] igb 0000:41:00.1: AER: TLP Header: 40000001 0000040f cdbfc00c c [ 233.538214] pci 0000:41:00.1: AER: can't recover (no error_detected callback) [ 233.538401] igb 0000:41:00.0: removed PHC on enp65s0f0 [ 233.546197] pcieport 0000:40:01.0: AER: device recovery failed [ 234.157244] igb 0000:41:00.0: IOV Disabled [ 371.619705] INFO: task irq/35-aerdrv:257 blocked for more than 122 seconds. [ 371.627489] Not tainted 6.4.0-dirty #2 [ 371.632257] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this. [ 371.641000] task:irq/35-aerdrv state:D stack:0 pid:257 ppid:2 f0 [ 371.650330] Call Trace: [ 371.653061] <TASK> [ 371.655407] __schedule+0x20e/0x660 [ 371.659313] schedule+0x5a/0xd0 [ 371.662824] schedule_preempt_disabled+0x11/0x20 [ 371.667983] __mutex_lock.constprop.0+0x372/0x6c0 [ 371.673237] ? __pfx_aer_root_reset+0x10/0x10 [ 371.678105] report_error_detected+0x25/0x1c0 [ 371.682974] ? __pfx_report_normal_detected+0x10/0x10 [ 371.688618] pci_walk_bus+0x72/0x90 [ 371.692519] pcie_do_recovery+0xb2/0x330 [ 371.696899] aer_process_err_devices+0x117/0x170 [ 371.702055] aer_isr+0x1c0/0x1e0 [ 371.705661] ? __set_cpus_allowed_ptr+0x54/0xa0 [ 371.710723] ? __pfx_irq_thread_fn+0x10/0x10 [ 371.715496] irq_thread_fn+0x20/0x60 [ 371.719491] irq_thread+0xe6/0x1b0 [ 371.723291] ? __pfx_irq_thread_dtor+0x10/0x10 [ 371.728255] ? __pfx_irq_thread+0x10/0x10 [ 371.732731] kthread+0xe2/0x110 [ 371.736243] ? __pfx_kthread+0x10/0x10 [ 371.740430] ret_from_fork+0x2c/0x50 [ 371.744428] </TASK> The reproducer was a simple script: #!/bin/sh for i in `seq 1 5`; do modprobe -rv igb modprobe -v igb max_vfs=1 sleep 1 modprobe -rv igb done It turned out that this could only be reproduce on 82580 (quad and dual-port), but not on 82576, i350 and i210. Further debugging showed that igb_enable_sriov()'s call to pci_enable_sriov() is failing, because dev->is_physfn is 0 on 82580. Prior to commit 50f303496d92 ("igb: Enable SR-IOV after reinit"), igb_enable_sriov() jumped into the "err_out" cleanup branch. After this commit it only returned the error code. So the cleanup didn't take place, and the incorrect VF setup in the igb_adapter structure fooled the igb driver into assuming that VFs have been set up where no VF actually existed. Fix this problem by cleaning up again if pci_enable_sriov() fails. Fixes: 50f303496d92 ("igb: Enable SR-IOV after reinit") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13ixgbe: fix timestamp configuration codeVadim Fedorenko
The commit in fixes introduced flags to control the status of hardware configuration while processing packets. At the same time another structure is used to provide configuration of timestamper to user-space applications. The way it was coded makes this structures go out of sync easily. The repro is easy for 82599 chips: [root@hostname ~]# hwstamp_ctl -i eth0 -r 12 -t 1 current settings: tx_type 0 rx_filter 0 new settings: tx_type 1 rx_filter 12 The eth0 device is properly configured to timestamp any PTPv2 events. [root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1 current settings: tx_type 1 rx_filter 12 SIOCSHWTSTAMP failed: Numerical result out of range The requested time stamping mode is not supported by the hardware. The error is properly returned because HW doesn't support all packets timestamping. But the adapter->flags is cleared of timestamp flags even though no HW configuration was done. From that point no RX timestamps are received by user-space application. But configuration shows good values: [root@hostname ~]# hwstamp_ctl -i eth0 current settings: tx_type 1 rx_filter 12 Fix the issue by applying new flags only when the HW was actually configured. Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13ALSA: usb-audio: mixer: Remove temporary string use in parse_clock_source_unitPeter Ujfalusi
The kctl->id.name can be directly passed to snd_usb_copy_string_desc() and if the string has been fetched the suffix can be appended with the append_ctl_name() call. The temporary name string becomes redundant and can be removed. This change will also fixes the following compiler warning/error (W=1): sound/usb/mixer.c: In function ‘parse_audio_unit’: sound/usb/mixer.c:1972:29: error: ‘ Validity’ directive output may be truncated writing 9 bytes into a region of size between 1 and 44 [-Werror=format-truncation=] 1972 | "%s Validity", name); | ^~~~~~~~~ In function ‘parse_clock_source_unit’, inlined from ‘parse_audio_unit’ at sound/usb/mixer.c:2892:10: sound/usb/mixer.c:1971:17: note: ‘snprintf’ output between 10 and 53 bytes into a destination of size 44 1971 | snprintf(kctl->id.name, sizeof(kctl->id.name), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1972 | "%s Validity", name); | ~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors The warnings got brought to light by a recent patch upstream: commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230913093933.24564-1-peter.ujfalusi@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-13i2c: cadence: Fix the kernel-doc warningsShubhrajyoti Datta
This fixes the below warnings drivers/i2c/busses/i2c-cadence.c:221: warning: Function parameter or member 'rinfo' not described in 'cdns_i2c' Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308171510.bKHBcZQW-lkp@intel.com/ Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13pmdomain: Rename the genpd subsystem to pmdomainUlf Hansson
It has been pointed out that naming a subsystem "genpd" isn't very self-explanatory and the acronym itself that means Generic PM Domain, is known only by a limited group of people. In a way to improve the situation, let's rename the subsystem to pmdomain, which ideally should indicate that this is about so called Power Domains or "PM domains" as we often also use within the Linux Kernel terminology. Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230912221127.487327-1-ulf.hansson@linaro.org
2023-09-13i2c: aspeed: Reset the i2c controller when timeout occursTommy Huang
Reset the i2c controller when an i2c transfer timeout occurs. The remaining interrupts and device should be reset to avoid unpredictable controller behavior. Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support") Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: I2C_MLXCPLD on ARM64 should depend on ACPIGeert Uytterhoeven
The "i2c_mlxcpld" platform device is only instantiated on X86 systems (through drivers/platform/x86/mlx-platform.c), or on ARM64 systems with ACPI (through drivers/platform/mellanox/nvsw-sn2201.c). Hence further restrict the dependency on ARM64 to ACPI, to prevent asking the user about this driver when configuring an ARM64 kernel without ACPI support. While at it, document in the Kconfig help text that the driver supports ARM64/ACPI based systems, too. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Vadim Pasternak <vadimp@nvidia.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: Make I2C_ATR invisibleGeert Uytterhoeven
I2C Address Translator (ATR) support is not a stand-alone driver, but a library. All of its users select I2C_ATR. Hence there is no need for the user to enable this symbol manually, except when compile-testing. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: Drop legacy callback .probe_new()Uwe Kleine-König
Now that all drivers are converted to the (new) .probe() callback, the temporary .probe_new() can go away. \o/ Link: https://lore.kernel.org/linux-i2c/20230626094548.559542-1-u.kleine-koenig@pengutronix.de Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13w1: ds2482: Switch back to use struct i2c_driver's .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/lkml/20230612072807.839689-1-u.kleine-koenig@pengutronix.de/ Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13ALSA: hda/realtek: Splitting the UX3402 into two separate modelsKnyazev Arseniy
UX3402VA and UX3402ZA models require different hex values, so comibining them into one model is incorrect. Fixes: 491a4ccd8a02 ("ALSA: hda/realtek: Add quirk for ASUS Zenbook using CS35L41") Signed-off-by: Knyazev Arseniy <poseaydone@ya.ru> Link: https://lore.kernel.org/r/20230913053343.119798-1-poseaydone@ya.ru Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-13ALSA: hda: intel-sdw-acpi: Use u8 type for link indexPeter Ujfalusi
Use consistently u8 for sdw link index. The id is limited to 4, u8 is adequate in size to store it. This change will also fixes the following compiler warning/error (W=1): sound/hda/intel-sdw-acpi.c: In function ‘sdw_intel_acpi_scan’: sound/hda/intel-sdw-acpi.c:34:35: error: ‘-subproperties’ directive output may be truncated writing 14 bytes into a region of size between 7 and 17 [-Werror=format-truncation=] 34 | "mipi-sdw-link-%d-subproperties", i); | ^~~~~~~~~~~~~~ In function ‘is_link_enabled’, inlined from ‘sdw_intel_scan_controller’ at sound/hda/intel-sdw-acpi.c:106:8, inlined from ‘sdw_intel_acpi_scan’ at sound/hda/intel-sdw-acpi.c:180:9: sound/hda/intel-sdw-acpi.c:33:9: note: ‘snprintf’ output between 30 and 40 bytes into a destination of size 32 33 | snprintf(name, sizeof(name), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ 34 | "mipi-sdw-link-%d-subproperties", i); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors The warnings got brought to light by a recent patch upstream: commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230912162617.29178-1-peter.ujfalusi@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-13ALSA: hda: cs35l56: Disable low-power hibernation modeRichard Fitzgerald
Do not allow the CS35L56 to be put into its lowest power "hibernation" mode. This only affects I2C because "hibernation" is already disabled on SPI. Recent firmwares need a different wake-up sequence. Until that sequence has been specified, the chip "hibernation" mode must be disabled otherwise it can intermittently fail to wake. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230912132739.3478441-1-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-13Documentation: embargoed-hardware-issues.rst: Add myself for RISC-VPalmer Dabbelt
I'm not sure exactly how RISC-V fits into the story here, but I'm happy to voluteer a sort of catch-all for vendors who aren't otherwise represented. Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230912180657.31841-1-palmer@rivosinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13Merge branch 'tcp-bind-fixes'David S. Miller
Kuniyuki Iwashima says: ==================== tcp: Fix bind() regression for v4-mapped-v6 address Since bhash2 was introduced, bind() is broken in two cases related to v4-mapped-v6 address. This series fixes the regression and adds test to cover the cases. Changes: v2: * Added patch 1 to factorise duplicated comparison (Eric Dumazet) v1: https://lore.kernel.org/netdev/20230911165106.39384-1-kuniyu@amazon.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.Kuniyuki Iwashima
We add these 8 test cases in bind_wildcard.c to check bind() conflicts. 1st bind() 2nd bind() --------- --------- 0.0.0.0 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 0.0.0.0 0.0.0.0 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 0.0.0.0 127.0.0.1 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 127.0.0.1 127.0.0.1 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 127.0.0.1 All test passed without bhash2 and with bhash2 and this series. Before bhash2: $ uname -r 6.0.0-rc1-00393-g0bf73255d3a3 $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Just after bhash2: $ uname -r 6.0.0-rc1-00394-g28044fc1d495 $ ./bind_wildcard ... ok 15 bind_wildcard.v4_local_v6_v4mapped_local.v4_v6 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 15 / 16 tests passed. On net.git: $ ./bind_wildcard ... not ok 14 bind_wildcard.v4_local_v6_v4mapped_any.v6_v4 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 13 / 16 tests passed. With this series: $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.Kuniyuki Iwashima
This is a preparation patch for the following patch. Let's define expected_errno in each test case so that we can add other test cases easily. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 00:51:45 +0000