summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-24drm/vc4: hdmi: Add a workqueue to set scramblingMaxime Ripard
It looks like some displays (like the LG 27UL850-W) don't enable the scrambling when the HDMI driver enables it. However, if we set later the scrambler enable bit, the display will work as expected. Let's create delayed work queue to periodically look at the display scrambling status, and if it's not set yet try to enable it again. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-12-maxime@cerno.tech
2021-05-24drm/vc4: hdmi: Enable the scramblerMaxime Ripard
The HDMI controller on the BCM2711 includes a scrambler in order to reach the HDMI 2.0 modes that require it. Let's add the support for it. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-11-maxime@cerno.tech
2021-05-24drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequenciesMaxime Ripard
In order to reach the frequencies needed to output at 594MHz, the firmware needs to be configured with the appropriate parameters in the config.txt file (enable_hdmi_4kp60 and force_turbo). Let's detect it at bind time, warn the user if we can't, and filter out the relevant modes. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-10-maxime@cerno.tech
2021-05-24drm/vc4: hdmi: Properly compute the BVB clock rateMaxime Ripard
The BVB clock rate computation doesn't take into account a mode clock of 594MHz that we're going to need to support 4k60. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-9-maxime@cerno.tech
2021-05-24drm/vc4: hvs: Make the HVS bind firstMaxime Ripard
We'll need to have the HVS binding before the HDMI controllers so that we can check whether the firmware allows to run in 4kp60. Reorder a bit the component list, and document the current constraints we're aware of. Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-8-maxime@cerno.tech
2021-05-24drm/vc4: hdmi: Prevent clock unbalanceMaxime Ripard
Since we fixed the hooks to disable the encoder at boot, we now have an unbalanced clk_disable call at boot since we never enabled them in the first place. Let's mimic the state of the hardware and enable the clocks at boot if the controller is enabled to get the use-count right. Cc: <stable@vger.kernel.org> # v5.10+ Fixes: 09c438139b8f ("drm/vc4: hdmi: Implement finer-grained hooks") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-7-maxime@cerno.tech
2021-05-24drm/vc4: crtc: Lookup the encoder from the register at bootMaxime Ripard
At boot, we can't rely on the vc4_get_crtc_encoder since we don't have a state yet and thus will not be able to figure out which connector is attached to our CRTC. However, we have a muxing bit in the CRTC register we can use to get the encoder currently connected to the pixelvalve. We can thus read that register, lookup the associated register through the vc4_pv_data structure, and then pass it to vc4_crtc_disable so that we can perform the proper operations. Fixes: 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-6-maxime@cerno.tech
2021-05-24drm/vc4: crtc: Fix vc4_get_crtc_encoder logicMaxime Ripard
The vc4_get_crtc_encoder function currently only works when the connector->state->crtc pointer is set, which is only true when the connector is currently enabled. However, we use it as part of the disable path as well, and our lookup will fail in that case, resulting in it returning a null pointer we can't act on. We can access the connector that used to be connected to that crtc though using the old connector state in the disable path. Since we want to support both the enable and disable path, we can support it by passing the state accessor variant as a function pointer, together with the atomic state. Fixes: 792c3132bc1b ("drm/vc4: encoder: Add finer-grained encoder callbacks") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-5-maxime@cerno.tech
2021-05-24drm/vc4: crtc: Pass the drm_atomic_state to config_pvMaxime Ripard
The vc4_crtc_config_pv will need to access the drm_atomic_state structure and its only parent function, vc4_crtc_atomic_enable already has access to it. Let's pass it as a parameter. Fixes: 792c3132bc1b ("drm/vc4: encoder: Add finer-grained encoder callbacks") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-4-maxime@cerno.tech
2021-05-24drm/vc4: crtc: Skip the TXPMaxime Ripard
The vc4_set_crtc_possible_masks is meant to run over all the encoders and then set their possible_crtcs mask to their associated pixelvalve. However, since the commit 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own"), the TXP has been turned to a CRTC and encoder of its own, and while it does indeed register an encoder, it no longer has an associated pixelvalve. The code will thus run over the TXP encoder and set a bogus possible_crtcs mask, overriding the one set in the TXP bind function. In order to fix this, let's skip any virtual encoder. Cc: <stable@vger.kernel.org> # v5.9+ Fixes: 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own") Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-3-maxime@cerno.tech
2021-05-24drm/vc4: txp: Properly set the possible_crtcs maskMaxime Ripard
The current code does a binary OR on the possible_crtcs variable of the TXP encoder, while we want to set it to that value instead. Cc: <stable@vger.kernel.org> # v5.9+ Fixes: 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own") Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-2-maxime@cerno.tech
2021-05-24drm/vc4: Separate VEC compatible variantsMateusz Kwiatkowski
The VEC's DAC on BCM2711 is slightly different compared to the one on BCM283x and needs different configuration. In particular, bit 3 (mask 0x8) switches the BCM2711 DAC input to "self-test input data", which makes the output unusable. Separating two compatible variants in devicetrees and the DRM driver was therefore necessary. The configurations used for both variants have been borrowed from Raspberry Pi (model 3B for BCM283x, 4B for BCM2711) firmware defaults. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-4-maxime@cerno.tech
2021-05-24dt-bindings: display: bcm2835-vec: Add BCM2711 compatibleMateusz Kwiatkowski
The BCM2711 VEC uses a slightly different, incompatible, setup than the one used for the earlier SoC. Add a new compatible for it. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-3-maxime@cerno.tech
2021-05-24drm/vc4: Fix clock source for VEC PixelValve on BCM2711Mateusz Kwiatkowski
On the BCM2711 (Raspberry Pi 4), the VEC is actually connected to output 2 of pixelvalve3. NOTE: This contradicts the Broadcom docs, but has been empirically tested and confirmed by Raspberry Pi firmware devs. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-2-maxime@cerno.tech
2021-05-22Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging from drm/drm-next to the patches for AMD devices for v5.14. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-05-22drm/mcde: Remove redundant error printing in mcde_dsi_probe()Zhen Lei
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210511091344.4508-1-thunder.leizhen@huawei.com
2021-05-22drm/panel: s6e63m0: Depromote debug printsLinus Walleij
The dev_info():s in the DSI driver are very talkative, depromote these to dev_dbg(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210313230913.4108256-1-linus.walleij@linaro.org
2021-05-22dt-bindings: display: convert faraday,tve200Corentin Labbe
Converts display/faraday,tve200.txt to yaml. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210519203547.837237-1-clabbe@baylibre.com
2021-05-21Merge tag 'amd-drm-next-5.14-2021-05-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.14-2021-05-21: amdgpu: - RAS fixes - SR-IOV fixes - More BO management cleanups - Aldebaran fixes - Display fixes - Support for new GPU, Beige Goby - Backlight fixes amdkfd: - RAS fixes - DMA mapping fixes - HMM SVM fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210521045743.4047-1-alexander.deucher@amd.com
2021-05-21Merge tag 'amd-drm-next-5.14-2021-05-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.14-2021-05-19: amdgpu: - Aldebaran updates - More LTTPR display work - Vangogh updates - SDMA 5.x GCR fixes - RAS fixes - PCIe ASPM support - Modifier fixes - Enable TMZ on Renoir - Buffer object code cleanup - Display overlay fixes - Initial support for multiple eDP panels - Initial SR-IOV support for Aldebaran - DP link training refactor - Misc code cleanups and bug fixes - SMU regression fixes for variable sized arrays - MAINTAINERS fixes for amdgpu amdkfd: - Initial SR-IOV support for Aldebaran - Topology fixes - Initial HMM SVM support - Misc code cleanups and bug fixes radeon: - Misc code cleanups and bug fixes - SMU regression fixes for variable sized arrays - Flickering fix for Oland with multiple 4K displays UAPI: - amdgpu: Drop AMDGPU_GEM_CREATE_SHADOW flag. This was always a kernel internal flag and userspace use of it has always been blocked. It's no longer needed so remove it. - amdkgd: HMM SVM support Overview: https://patchwork.freedesktop.org/series/85562/ Porposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/tree/fxkamd/hmm-wip Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210520031258.231896-1-alexander.deucher@amd.com
2021-05-21Merge tag 'drm-intel-next-2021-05-19-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Core Changes: - drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose). Driver Changes: - Display plane clock rates fixes and improvements (Ville). - Uninint DMC FW loader state during shutdown (Imre). - Convert snprintf to sysfs_emit (Xuezhi). - Fix invalid access to ACPI _DSM objects (Takashi). - A big refactor around how i915 addresses the graphics and display IP versions. (Matt, Lucas). - Backlight fix (Lyude). - Display watermark and DBUF fixes (Ville). - HDCP fix (Anshuman). - Improve cases where display is not available (Jose). - Defeature PSR2 for RKL and ALD-S (Jose). - VLV DSI panel power fixes and improvements (Hans). - display-12 workaround (Jose). - Fix modesetting (Imre). - Drop redundant address-of op before lttpr_common_caps array (Imre). - Fix compiler checks (Jose, Jason). - GLK display fixes (Ville). - Fix error code returns (Dan). - eDP novel: back again to slow and wide link training everywhere (Kai-Heng). - Abstract DMC FW path (Rodrigo). - Preparation and changes for upcoming XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh). - Fix comment typo in DSI code (zuoqilin). - Simplify CCS and UV plane alignment handling (Imre). - PSR Fixes on TGL (Gwan-gyeong, Jose). - Add intel_dp_hdcp.h and rename init (Jani). - Move crtc and dpll declarations around (Jani). - Fix pre-skl DP AUX precharge length (Ville). - Remove stray newlines from random files (Ville). - crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville). - Add frontbuffer tracking tracepoints (Ville). - ADL-S PCI ID updates (Anand). - Use unique backlight device names (Jani). - A few clean-ups on i915/audio (Jani). - Use intel_framebuffer instead of drm one on intel_fb functions (Imre). - Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre). - Nuke display error state (Ville). - ADL-P initial enablement patches starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika). - Display clean-up around VBT and the strap bits (Lucas). - Try YCbCr420 color when RGB fails (Werner). - More PSR fixes and improvements (Jose). - Other generic display code clean-up (Jose, Ville). - Use correct downstream caps for check Src-Ctl mode for PCON (Ankit). - Disable HiZ Raw Stall Optimization on broken gen7 (Simon). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YKVioeu0JkUAlR7y@intel.com
2021-05-20drm/ttm: Explain why ttm_bo_add_move_fence uses a shared slotDaniel Vetter
Motivated because I got confused and Christian confirmed why this works. I think this is non-obvious enough that it merits a slightly longer comment. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210519082409.672016-1-daniel.vetter@ffwll.ch
2021-05-20drm: Fix missing unlock and free on error in drm_legacy_addbufs_pci()Zou Wei
Add the missing unlock and free before return from function drm_legacy_addbufs_pci() in the error handling case. Fixes: 70556e24e18e ("drm: remove usage of drm_pci_alloc/free") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1621341302-112089-1-git-send-email-zou_wei@huawei.com
2021-05-20vgaarb: Use ACPI HID name to find integrated GPUKai-Heng Feng
Commit 3d42f1ddc47a ("vgaarb: Keep adding VGA device in queue") assumes the first device is an integrated GPU. However, on AMD platforms an integrated GPU can have higher PCI device number than a discrete GPU. Integrated GPU on ACPI platform generally has _DOD and _DOS method, so use that as predicate to find integrated GPU. If the new strategy doesn't work, fallback to use the first device as boot VGA. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210519135723.525997-1-kai.heng.feng@canonical.com
2021-05-20drm/bridge: anx7625: Synchronously run runtime suspend.Pi-Hsun Shih
Originally when using pm_runtime_put, there's a chance that the runtime suspend hook will be run after the following anx7625_bridge_mode_set call, resulting in the display_timing_valid field to be cleared, and the following power on fail. Change all pm_runtime_put to pm_runtime_put_sync, so all power off operations are guaranteed to be done after the call returns. Fixes: 60487584a79a ("drm/bridge: anx7625: refactor power control to use runtime PM framework") Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Tested-by: Tzung-Bi Shih <tzungbi@google.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210520064508.3121211-1-pihsun@chromium.org
2021-05-19drm/amdgpu: Unmap all MMIO mappingsAndrey Grodzovsky
Access to those must be prevented post pci_remove v6: Drop BOs list, unampping VRAM BAR is enough. v8: Add condition of xgmi.connected_to_cpu to MTTR handling and remove MTTR handling from the old place. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210517193105.491461-1-andrey.grodzovsky@amd.com
2021-05-19drm/amdgpu: Verify DMA opearations from device are doneAndrey Grodzovsky
In case device remove is just simualted by sysfs then verify device doesn't keep doing DMA to the released memory after pci_remove is done. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-16-andrey.grodzovsky@amd.com
2021-05-19drm/amd/display: Remove superfluous drm_mode_config_cleanupAndrey Grodzovsky
It's already being released by DRM core through devm Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-15-andrey.grodzovsky@amd.com
2021-05-19drm/sched: Avoid data corruptionsAndrey Grodzovsky
Wait for all dependencies of a job to complete before killing it to avoid data corruptions. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210519141407.88444-1-andrey.grodzovsky@amd.com
2021-05-19drm/scheduler: Fix hang when sched_entity releasedAndrey Grodzovsky
Problem: If scheduler is already stopped by the time sched_entity is released and entity's job_queue not empty I encountred a hang in drm_sched_entity_flush. This is because drm_sched_entity_is_idle never becomes false. Fix: In drm_sched_fini detach all sched_entities from the scheduler's run queues. This will satisfy drm_sched_entity_is_idle. Also wakeup all those processes stuck in sched_entity flushing as the scheduler main thread which wakes them up is stopped by now. v2: Reverse order of drm_sched_rq_remove_entity and marking s_entity as stopped to prevent reinserion back to rq due to race. v3: Drop drm_sched_rq_remove_entity, only modify entity->stopped and check for it in drm_sched_entity_is_idle Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-14-andrey.grodzovsky@amd.com
2021-05-19drm/amdgpu: Fix hang on device removal.Andrey Grodzovsky
If removing while commands in flight you cannot wait to flush the HW fences on a ring since the device is gone. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-13-andrey.grodzovsky@amd.com
2021-05-19drm/amdgpu: Prevent any job recoveries after device is unplugged.Andrey Grodzovsky
Return DRM_TASK_STATUS_ENODEV back to the scheduler when device is not present so they timeout timer will not be rearmed. v5: Update to match updated return values in enum drm_gpu_sched_stat Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-12-andrey.grodzovsky@amd.com
2021-05-19drm/sched: Make timeout timer rearm conditional.Andrey Grodzovsky
We don't want to rearm the timer if driver hook reports that the device is gone. v5: Update drm_gpu_sched_stat values in code. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-11-andrey.grodzovsky@amd.com
2021-05-19drm/amdgpu: Guard against write accesses after device removalAndrey Grodzovsky
This should prevent writing to memory or IO ranges possibly already allocated for other uses after our device is removed. v5: Protect more places wher memcopy_to/form_io takes place Protect IB submissions v6: Switch to !drm_dev_enter instead of scoping entire code with brackets. v7: Drop guard of HW ring commands emission protection since they are in GART and not in MMIO. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-10-andrey.grodzovsky@amd.com
2021-05-19drm/amdgpu: Convert driver sysfs attributes to static attributesAndrey Grodzovsky
This allows to remove explicit creation and destruction of those attrs and by this avoids warnings on device finalizing post physical device extraction. v5: Use newly added pci_driver.dev_groups directly Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-9-andrey.grodzovsky@amd.com
2021-05-19PCI: Add support for dev_groups to struct pci_driverAndrey Grodzovsky
This helps converting PCI drivers sysfs attributes to static. Analogous to' commit b71b283e3d6d ("USB: add support for dev_groups to struct usb_driver")' Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-8-andrey.grodzovsky@amd.com
2021-05-19drm/amdgpu: Remap all page faults to per process dummy page.Andrey Grodzovsky
On device removal reroute all CPU mappings to dummy page per drm_file instance or imported GEM object. v4: Update for modified ttm_bo_vm_dummy_page Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-7-andrey.grodzovsky@amd.com
2021-05-19drm/amdgpu: Handle IOMMU enabled case.Andrey Grodzovsky
Problem: Handle all DMA IOMMU group related dependencies before the group is removed. Those manifest themself in that when IOMMU enabled DMA map/unmap is dependent on the presence of IOMMU group the device belongs to but, this group is released once the device is removed from PCI topology. Fix: Expedite all such unmap operations to pci remove driver callback. v5: Drop IOMMU notifier and switch to lockless call to ttm_tt_unpopulate v6: Drop the BO unamp list v7: Drop amdgpu_gart_fini In amdgpu_ih_ring_fini do uncinditional check (!ih->ring) to avoid freeing uniniitalized rings. Call amdgpu_ih_ring_fini unconditionally. v8: Add deatiled explanation Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210517143851.475058-1-andrey.grodzovsky@amd.com
2021-05-19drm/amdgpu: Add early fini callbackAndrey Grodzovsky
Use it to call disply code dependent on device->drv_data before it's set to NULL on device unplug v5: Move HW finilization into this callback to prevent MMIO accesses post cpi remove. v7: Split kfd suspend from device exit to expdite HW related stuff to amdgpu_pci_remove v8: Squash previous KFD commit into this commit to avoid compile break. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210520032057.497334-1-andrey.grodzovsky@amd.com
2021-05-19drm/amdgpu: Split amdgpu_device_fini into early and lateAndrey Grodzovsky
Some of the stuff in amdgpu_device_fini such as HW interrupts disable and pending fences finilization must be done right away on pci_remove while most of the stuff which relates to finilizing and releasing driver data structures can be kept until drm_driver.release hook is called, i.e. when the last device reference is dropped. v4: Change functions prefix early->hw and late->sw Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-3-andrey.grodzovsky@amd.com
2021-05-19drm/ttm: Remap all page faults to per process dummy page.Andrey Grodzovsky
On device removal reroute all CPU mappings to dummy page. v3: Remove loop to find DRM file and instead access it by vma->vm_file->private_data. Move dummy page installation into a separate function. v4: Map the entire BOs VA space into on demand allocated dummy page on the first fault for that BO. v5: Remove duplicate return. v6: Polish ttm_bo_vm_dummy_page, remove superfluous code. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-2-andrey.grodzovsky@amd.com
2021-05-20Merge tag 'drm-misc-next-2021-05-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.14: UAPI Changes: Cross-subsystem Changes: Core Changes: * aperture: Fix unlocking on errors * legacy: Fix some doc comments Driver Changes: * drm/amdgpu: Free resource on fence usage query; Fix fence calculation; * drm/bridge: Lt9611: Add missing MODULE_DEVICE_TABLE * drm/i915: Print formats with %p4cc * drm/ingenic: IPU planes are now always of type OVERLAY * drm/nouveau: Remove left-over reference to struct drm_device.pdev * drm/panfrost: Disable devfreq if num_supplies > 1; Add Mediatek MT8183 + DT bindings; Cleanups * drm/simpledrm: Print resources with %pr; Fix use-after-free errors; Fix NULL deref; Fix MAINTAINERS entry * drm/vmwgfx: Fix memory allocation and leak in FIFO allocation; Fix return value in PCI resource setup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YKJs2IfwSYvuGPU7@linux-uq9g.fritz.box
2021-05-19drm/amdgpu: stop touching sched.ready in the backendChristian König
This unfortunately comes up in regular intervals and breaks GPU reset for the engine in question. The sched.ready flag controls if an engine can't get working during hw_init, but should never be set to false during hw_fini. v2: squash in unused variable fix (Alex) Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amd/amdgpu: fix a potential deadlock in gpu resetLang Yu
When amdgpu_ib_ring_tests failed, the reset logic called amdgpu_device_ip_suspend twice, then deadlock occurred. Deadlock log: [ 805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110). [ 806.290952] [drm] free PSP TMR buffer [ 806.319406] ============================================ [ 806.320315] WARNING: possible recursive locking detected [ 806.321225] 5.11.0-custom #1 Tainted: G W OEL [ 806.322135] -------------------------------------------- [ 806.323043] cat/2593 is trying to acquire lock: [ 806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.325668] but task is already holding lock: [ 806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.328430] other info that might help us debug this: [ 806.329539] Possible unsafe locking scenario: [ 806.330549] CPU0 [ 806.330983] ---- [ 806.331416] lock(&adev->dm.dc_lock); [ 806.332086] lock(&adev->dm.dc_lock); [ 806.332738] *** DEADLOCK *** [ 806.333747] May be due to missing lock nesting notation [ 806.334899] 3 locks held by cat/2593: [ 806.335537] #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110 [ 806.337009] #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu] [ 806.339018] #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.340869] stack backtrace: [ 806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G W OEL 5.11.0-custom #1 [ 806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020 [ 806.344413] Call Trace: [ 806.344849] dump_stack+0x93/0xbd [ 806.345435] __lock_acquire.cold+0x18a/0x2cf [ 806.346179] lock_acquire+0xca/0x390 [ 806.346807] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.347813] __mutex_lock+0x9b/0x930 [ 806.348454] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.349434] ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu] [ 806.350581] ? _raw_spin_unlock_irqrestore+0x47/0x50 [ 806.351437] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.352437] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.353252] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.354064] mutex_lock_nested+0x1b/0x20 [ 806.354747] ? mutex_lock_nested+0x1b/0x20 [ 806.355457] dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.356427] ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu] [ 806.357736] amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu] [ 806.360394] amdgpu_device_ip_suspend+0x21/0x70 [amdgpu] [ 806.362926] amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu] [ 806.365560] amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu] Signed-off-by: Lang Yu <Lang.Yu@amd.com> Acked-by: Christian KÃnig <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amdgpu: modify system reference clock source for navi+ (V2)Aaron Liu
Starting from Navi+, the rlc reference clock is used for system clock from vbios gfx_info table. It is incorrect to use core_refclk_10khz of vbios smu_info table as system clock. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amdgpu: update sdma golden setting for Navi12Guchun Chen
Current golden setting is out of date. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amdgpu: update gc golden setting for Navi12Guchun Chen
Current golden setting is out of date. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amdgpu: Fix a use-after-freexinhui pan
looks like we forget to set ttm->sg to NULL. Hit panic below [ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 1235.989074] Call Trace: [ 1235.991751] sg_free_table+0x17/0x20 [ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu] [ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu] [ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm] [ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm] [ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm] [ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm] [ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu] [ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu] [ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] [ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu] Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amdgpu/display: restore the backlight on modeset (v2)Alex Deucher
To stay consistent with the user's setting. v2: rebase on multi-eDP support Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1337 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amdgpu/display: add helper functions to get/set backlight (v2)Alex Deucher
And cache the value. These can be used by the backlight callbacks and modesetting functions. v2: rebase on latest backlight changes. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1337 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 22:49:31 +0000