Age | Commit message (Collapse) | Author |
|
Only send boot_config cmd to ASICs that support dynamic
boot config. Otherwise, the boot_config cmd will fail.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check firmware flags to determine whether dynmaic
boot config is supported or not.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check cached firmware_flags to determin whether
two stage mem training is supported or not.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check cached firmware_flags to determine whether
sram ecc is supported or not.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check cached firmware_flags to determine if gpu
virtualization is supported in vbios
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fimware capability was changed from 16 bits to 32 bits
for atomfirmware. add helper funciton to query firmware
capability and cache the value at early stage.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Update SRIOV PF2VF header with latest revision
- Extend existing function in amdgpu_virt.c to read MM bandwidth config
from PF2VF message
- Add SRIOV Sienna Cichlid codec array and update the bandwidth with
PF2VF message
v2: squash in removal of unused variable (Alex)
Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Monk liu <monk.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MTYPE UC was used for a specific use case that ended up not being
implemented. Use NC for better performance for coarse-grained memory where
cache coherence during shader execution is not required.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MTYPE UC was used for a specific use case that ended up not being
implemented. Use NC for better performance for coarse-grained memory where
cache coherence during shader execution is not required.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add compile flag CONFIG_DEBUG_FS to clear the warning:
unused variable 'amdgpu_securedisplay_debugfs_ops'
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The user applications maybe register the KFD_EVENT_TYPE_HW_EXCEPTION and
KFD_EVENT_TYPE_MEMORY events, driver could notify them when poison data
consumed. Beside that, some applications maybe register SIGBUS signal
hander. These applications will handle poison data by themselves, exit
or re-create context to re-dispatch works.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
are connected
Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue
doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and
another one is 4K 30Hz (pixelclock 297MHz).
The issue is gone after setting "power_dpm_force_performance_level" to
"high". Following the indication, we found that the issue occurs when
sclk is too low.
So resolve the issue by disabling sclk switching when there are two
monitors requires high pixelclock (> 297MHz).
v2:
- Only apply the fix to Oland.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If xnack is on, new range is created to recover retry vm fault or
created by SVM API calls, set all GPUs have access to the range.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update aldebaran driver-PMFW interface to version 0x07
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the process of cancelling hrtimer to sw_fini
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since ASPM function has been stable, we don't need to add the modprobe
parameter and we can enable ASPM by default.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the method of disabling VCN IP for specific SKU for navi1x ASIC,
it will judge whether should add the related IP at the function of
amdgpu_device_ip_block_add().
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Judgement whether to add an sw ip according to the harvest info.
v2: fix indentation (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is possible that the previous waves have exited before others are
created, so the other waves maybe reuse pyhsical resouces left by
previous ones. Therefore add barrier instruction to synchronize waves within
the same threadgroup.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add missing structure elements.
Fixes: 0dd79532340568 ("drm/amdgpu/display: Implement functions to let DC allocate GPU memory")
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: fixes, dma-fence annotation, and color encoding/range plane properties
- Annotate dma-fence critical section in atomic_commit_tail
- Fix PRG modifiers after drmm resource conversion to regain tiled
scanout capability
- Add 8 pixel alignment fix to support 1366x768 resolution
- Stop advertising YUV formats on planes that don't support them
- Add COLOR_ENCODING and COLOR_RANGE plane properties on planes
that support them
- Remove unnecessarily exported symbols
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/858310d193e10fc17221418dee6172af367eb046.camel@pengutronix.de
|
|
There are some places at drm that ended receiving a
REPLACEMENT CHARACTER U+fffd ('�'), probably because of
some bad charset conversion.
Fix them by using what it seems to be the proper
character.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e606930c73029f16673849c57acac061dd923866.1621412009.git.mchehab+huawei@kernel.org
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.14:
UAPI Changes:
* drm: Disable connector force-probing for non-master clients
* drm: Enforce consistency between IN_FORMATS property and cap + related
driver cleanups
* drm/amdgpu: Track devices, process info and fence info via
/proc/<pid>/fdinfo
* drm/ioctl: Mark AGP-related ioctls as legacy
* drm/ttm: Provide tt_shrink file to trigger shrinker via debugfs;
Cross-subsystem Changes:
* fbdev/efifb: Special handling of non-PCI devices
* fbdev/imxfb: Fix error message
Core Changes:
* drm: Add connector helper to attach HDR-metadata property and convert
drivers
* drm: Add connector helper to compare HDR-metadata and convert drivers
* drm: Add conenctor helper to attach colorspace property
* drm: Signal colorimetry in HDMI infoframe
* drm: Support pitch for destination buffers; Add blitter function
with generic format conversion
* drm: Remove struct drm_device.pdev and update legacy drivers
* drm: Remove obsolete DRM_KMS_FB_HELPER config option in core and drivers
* drm: Remove obsolete drm_pci_alloc/drm_pci_free
* drm/aperture: Add helpers for aperture ownership and convert drivers, replaces rsp fbdev helpers
* drm/agp: Mark DRM AGP code as legacy and convert legacy drivers
* drm/atomic-helpers: Cleanups
* drm/dp: Handle downstream port counts of 0 correctly; AUX channel fixes; Use
drm_err_*/drm_dbg_*(); Cleanups
* drm/dp_dual_mode: Use drm_err_*/drm_dbg_*()
* drm/dp_mst: Use drm_err_*/drm_dbg_*(); Use Extended Base Receiver Capability DPCD space
* drm/gem-ttm-helper: Provide helper for dumb_map_offset and convert drivers
* drm/panel: Use sysfs_emit; panel-simple: Use runtime PM, Power up panel
when reading EDID, Cache EDID, Cleanups;
Lms397KF04: DT bindings
* drm/pci: Mark AGP helpers as legacy
* drm/print: Handle NULL for DRM devices gracefully
* drm/scheduler: Change scheduled fence track
* drm/ttm: Don't count SG BOs against pages_limit; Warn about freeing pinned
BOs; Fix error handling if no BO can be swapped out; Move special
handling of non-GEM drivers into vmwgfx; Move page_alignment into
the BO; Set drm-misc as TTM tree in MAINTAINERS; Cleanup
ttm_agp_backend; Add ttm_sys_manager for system domain; Cleanups
Driver Changes:
* drm: Don't set allow_fb_modifiers explictly in drivers
* drm/amdgpu: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages
* drm/ast: Use managed pcim_iomap(); Fix EDID retrieval with DP501
* drm/bridge: MHDP8546: HDCP support + DT bindings, Register DP AUX channel
with userspace; Sil8620: Fix module dependencies; dw-hdmi: Add option to
not load CEC driver; Fix stopping in drm_bridge_chain_pre_enable();
Ti-sn65dsi86: Fix refclk handling, Break GPIO and MIPI-to-eDP into
subdrivers, Use pm_runtime autosuspend, cleanups; It66121: Add
driver + DT bindings; Adv7511: Support I2S IEC958 encoding; Anx7625: fix
power-on delay; Nwi-dsi: Modesetting fixes; Cleanups
* drm/bochs: Support screen blanking
* drm/gma500: Cleanups
* drm/gud: Cleanups
* drm/i915: Use correct max source link rate for MST
* drm/kmb: Cleanups
* drm/meson: Disable dw-hdmi CEC driver
* drm/nouveau: Pin/unpin fixes wrt to TTM; Use bo->base.size instead of
mem->num_pages; Register AUX adapters after their connectors
* drm/qxl: Fix shadow BO unpin
* drm/radeon: Duplicate some DRM AGP code to uncouple from legacy drivers
* drm/simpledrm: Add a generic DRM driver for simple-framebuffer devices
* drm/tiny: Fix log spam if probe function gets deferred
* drm/vc4: Add support for HDR-metadata property; Cleanups
* drm/virtio: Create dumb BOs as guest blobs;
* drm/vkms: Use managed drmm_universal_plane_alloc(); Add XRGB plane
composition; Add overlay support
* drm/vmwgfx: Enable console with DRM_FBDEV_EMULATION; Fix CPU updates
of coherent multisample surfaces; Remove reservation semaphore; Add
initial SVGA3 support; Support amd64; Use 1-based IDR; Use min_t();
Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YJvkD523evviED01@linux-uq9g.fritz.box
|
|
If the do while loop breaks in 'if (!sg_dma_len(sgl))' in the first
iteration, err is uninitialized causing a wrong call to zap_vma_ptes().
But that is impossible to happen as a scatterlist must have at least
one valid segment.
Anyways to avoid more reports from static checkers initializing ret
here.
Fixes: b12d691ea5e0 ("i915: fix remap_io_sg to verify the pgprot")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210517202117.179303-1-jose.souza@intel.com
|
|
Let the user know what went wrong in drm_gem_fb_init_with_funcs
failure paths.
v2: use proper format specifier for size_t (kernel test robot)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZS4eX0PtTuNvHezILcTWeWINOkRyMS4krXND3cIE@cp4-web-032.plabs.ch
|
|
This driver adds support for the ChromeOS EC ANX7688 HDMI to DP converter
For our use case, the only reason the Linux kernel driver is necessary is
to reject resolutions that require more bandwidth than what is available
on the DP side. DP bandwidth and lane count are reported by the bridge via
2 registers and, as far as we know, only chips that have a firmware
version greater than 0.85 support these two registers.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[The driver is OF only so should depends on CONFIG_OF]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[convert to i2c driver, rename to cros_ec_anx7688, add err checks]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518141927.24795-3-dafna.hirschfeld@collabora.com
|
|
ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip
which is connected to and operated by the ChromeOS Embedded Controller
(See google,cros-ec.yaml). It is accessed using I2C tunneling through
the EC and therefore its node should be a child of an EC I2C tunnel node
(See google,cros-ec-i2c-tunnel.yaml).
ChromOS EC ANX7688 is found on Acer Chromebook R13 (elm)
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518141927.24795-2-dafna.hirschfeld@collabora.com
|
|
The ti_sn_aux_transfer() function returns ssize_t (signed long). It's
supposed to return negative error codes or the number of bytes
transferred. The "ret" variable is int and the "len" variable is
unsigned int.
The problem is that with a ternary like this, the negative int is first
type promoted to unsigned int to match "len" at this point it is a high
positive value. Then when it is type promoted to ssize_t (s64) it
remains a high positive value instead of sign extending and becoming a
negative again.
Fix this by removing the ternary.
Fixes: b137406d9679 ("drm/bridge: ti-sn65dsi86: If refclk, DP AUX can happen w/out pre-enable")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/YKOGogHasIyvF8nj@mwanda
|
|
When resetting CACHE_MODE registers, don't enable HiZ Raw Stall
Optimization on Ivybridge GT1 and Baytrail, as it causes severe glitches
when rendering any kind of 3D accelerated content.
This optimization is disabled on these platforms by default according to
official documentation from 01.org.
Fixes: ef99a60ffd9b ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3081
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3404
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3071
Reviewed-By: Manuel Bentele <development@manuel-bentele.de>
Signed-off-by: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo removed invalid Fixes line]
Link: https://patchwork.freedesktop.org/patch/msgid/20210426161124.2b7fd708@dellnichtsogutkiste
|
|
Add suspend / resume hooks for anx7625 driver, that power off the device
on suspend and power on the device on resume if it was previously
powered.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210517063553.554955-2-pihsun@chromium.org
|
|
The driver originally use an atomic_t for keep track of the power
status, which makes the driver more complicated than needed, and has
some race condition as it's possible to have the power on and power off
sequence going at the same time.
This patch remove the usage of the atomic_t power_status, and use the
kernel runtime power management framework instead.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210517063553.554955-1-pihsun@chromium.org
|
|
In the original code if the "ctx = devm_kzalloc()" allocation failed
then we should have called of_node_put(ep); before returning. It's
actually a bit easier to do the allocation first before assigning
ep = of_graph_get_endpoint_by_regs().
Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YJ+ZgXTFa6voZuJG@mwanda
|
|
This code is passing the wrong variable to PTR_ERR() so it doesn't
return the correct error code.
Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YJ+ZX3BdKPAN0pUZ@mwanda
|
|
We should call virtio_gpu_deinit() to free virtqueues when
drm_dev_register() failed.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-3-xieyongji@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The virtio_gpu_init() will free vgdev and vgdev->vbufs on failure.
But such failure will be caught by virtio_gpu_probe() and then
virtio_gpu_release() will be called to do some cleanup which
will free vgdev and vgdev->vbufs again. So let's set dev->dev_private
to NULL to avoid double free.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-2-xieyongji@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The dev->dev_private might not be allocated if virtio_gpu_pci_quirk()
or virtio_gpu_init() failed. In this case, we should avoid the cleanup
in virtio_gpu_release().
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-1-xieyongji@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Time to get back in sync...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The functionality is only implemented for legacy drivers. Mark the ioctl
as legacy and move the code behind CONFIG_DRM_LEGACY. If legacy drivers
are disabled, the ioctl call now returns -EINVAL instead of -EOPNOTSUPP.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516195135.3755-1-tzimmermann@suse.de
|
|
The legacy PCI init code sets the drvdata for drivers with MODESET
flag, but none of the old UMS drivers sets the flag. Remove the branch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516191918.20974-1-tzimmermann@suse.de
|
|
DRM leases do not use DRM legacy code. Remove the rsp include
statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516185937.5644-4-tzimmermann@suse.de
|
|
Nouveau does not use DRM legacy code. Remove the rsp. include
statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516185937.5644-3-tzimmermann@suse.de
|
|
i915 does not use DRM legacy code. Remove the rsp include statements.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516185937.5644-2-tzimmermann@suse.de
|
|
When using a 24-bit panel on a 8-bit serial bus, the pixel clock
requested by the panel has to be multiplied by 3, since the subpixels
are shifted sequentially.
The code (in ingenic_drm_encoder_atomic_check) already computed
crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate()
used crtc_state->adjusted_mode->clock instead.
Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when using a 3x8-bit panel")
Cc: stable@vger.kernel.org # v5.10
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # CI20/jz4780 (HDMI) and Alpha400/jz4730 (LCD)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323144008.166248-1-paul@crapouillou.net
|
|
Commit 11e8f5fd223b ("drm: Add simpledrm driver") adds the file
./drivers/gpu/drm/tiny/simpledrm.c, but refers to the file
./drivers/gpu/drm/tiny/simplekms.c with the new MAINTAINERS section
DRM DRIVER FOR SIMPLE FRAMEBUFFERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: drivers/gpu/drm/tiny/simplekms.c
Repair the file entry by referring to the right location.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210517101648.29906-1-lukas.bulwahn@gmail.com
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1620801955-19188-1-git-send-email-zou_wei@huawei.com
|
|
|
|
Fix the following make W=1 kernel build warning:
drivers/gpu/drm/drm_context.c:136: warning: expecting prototype for drm_ctxbitmap_flush(). Prototype was for drm_legacy_ctxbitmap_flush() instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513071918.1728535-1-yangyingliang@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for driver core changes that happened in
5.13-rc1.
The clk driver fix resolves a many-reported issue with booting some
devices, and the USB typec fix resolves the reported problem of USB
systems on some embedded boards.
Both of these have been in linux-next this week with no reported
issues"
* tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
clk: Skip clk provider registration when np is NULL
usb: typec: tcpm: Don't block probing of consumers of "connector" nodes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO driver fixes and one Staging driver fix for
5.13-rc2.
Nothing major, just some resolutions for reported problems:
- gcc-11 bogus warning fix for rtl8723bs
- iio driver tiny fixes
All of these have been in linux-next for many days with no reported
issues"
* tag 'staging-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: tsl2583: Fix division by a zero lux_val
iio: core: return ENODEV if ioctl is unknown
iio: core: fix ioctl handlers removal
iio: gyro: mpu3050: Fix reported temperature value
iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
iio: light: gp2ap002: Fix rumtime PM imbalance on error
staging: rtl8723bs: avoid bogus gcc warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.13-rc2. They consist of a number
of resolutions for reported issues:
- typec fixes for found problems
- xhci fixes and quirk additions
- dwc3 driver fixes
- minor fixes found by Coverity
- cdc-wdm fixes for reported problems
All of these have been in linux-next for a few days with no reported
issues"
* tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
usb: core: hub: fix race condition about TRSMRCY of resume
usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default
xhci: Add reset resume quirk for AMD xhci controller.
usb: xhci: Increase timeout for HC halt
xhci: Do not use GFP_KERNEL in (potentially) atomic context
xhci: Fix giving back cancelled URBs even if halted endpoint can't reset
xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
usb: musb: Fix an error message
usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
usb: fotg210-hcd: Fix an error message
docs: usb: function: Modify path name
usb: dwc3: omap: improve extcon initialization
usb: typec: ucsi: Put fwnode in any case during ->probe()
usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
usb: dwc2: Remove obsolete MODULE_ constants from platform.c
usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
usb: dwc3: imx8mp: detect dwc3 core node via compatible string
usb: dwc3: gadget: Return success always for kick transfer in ep queue
...
|