summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-31fscache: Fix dead object requeueDavid Howells
Under some circumstances, an fscache object can become queued such that it fscache_object_work_func() can be called once the object is in the OBJECT_DEAD state. This results in the kernel oopsing when it tries to invoke the handler for the state (which is hard coded to 0x2). The way this comes about is something like the following: (1) The object dispatcher is processing a work state for an object. This is done in workqueue context. (2) An out-of-band event comes in that isn't masked, causing the object to be queued, say EV_KILL. (3) The object dispatcher finishes processing the current work state on that object and then sees there's another event to process, so, without returning to the workqueue core, it processes that event too. It then follows the chain of events that initiates until we reach OBJECT_DEAD without going through a wait state (such as WAIT_FOR_CLEARANCE). At this point, object->events may be 0, object->event_mask will be 0 and oob_event_mask will be 0. (4) The object dispatcher returns to the workqueue processor, and in due course, this sees that the object's work item is still queued and invokes it again. (5) The current state is a work state (OBJECT_DEAD), so the dispatcher jumps to it - resulting in an OOPS. When I'm seeing this, the work state in (1) appears to have been either LOOK_UP_OBJECT or CREATE_OBJECT (object->oob_table is fscache_osm_lookup_oob). The window for (2) is very small: (A) object->event_mask is cleared whilst the event dispatch process is underway - though there's no memory barrier to force this to the top of the function. The window, therefore is from the time the object was selected by the workqueue processor and made requeueable to the time the mask was cleared. (B) fscache_raise_event() will only queue the object if it manages to set the event bit and the corresponding event_mask bit was set. The enqueuement is then deferred slightly whilst we get a ref on the object and get the per-CPU variable for workqueue congestion. This slight deferral slightly increases the probability by allowing extra time for the workqueue to make the item requeueable. Handle this by giving the dead state a processor function and checking the for the dead state address rather than seeing if the processor function is address 0x2. The dead state processor function can then set a flag to indicate that it's occurred and give a warning if it occurs more than once per object. If this race occurs, an oops similar to the following is seen (note the RIP value): BUG: unable to handle kernel NULL pointer dereference at 0000000000000002 IP: [<0000000000000002>] 0x1 PGD 0 Oops: 0010 [#1] SMP Modules linked in: ... CPU: 17 PID: 16077 Comm: kworker/u48:9 Not tainted 3.10.0-327.18.2.el7.x86_64 #1 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015 Workqueue: fscache_object fscache_object_work_func [fscache] task: ffff880302b63980 ti: ffff880717544000 task.ti: ffff880717544000 RIP: 0010:[<0000000000000002>] [<0000000000000002>] 0x1 RSP: 0018:ffff880717547df8 EFLAGS: 00010202 RAX: ffffffffa0368640 RBX: ffff880edf7a4480 RCX: dead000000200200 RDX: 0000000000000002 RSI: 00000000ffffffff RDI: ffff880edf7a4480 RBP: ffff880717547e18 R08: 0000000000000000 R09: dfc40a25cb3a4510 R10: dfc40a25cb3a4510 R11: 0000000000000400 R12: 0000000000000000 R13: ffff880edf7a4510 R14: ffff8817f6153400 R15: 0000000000000600 FS: 0000000000000000(0000) GS:ffff88181f420000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000002 CR3: 000000000194a000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa0363695 ffff880edf7a4510 ffff88093f16f900 ffff8817faa4ec00 ffff880717547e60 ffffffff8109d5db 00000000faa4ec18 0000000000000000 ffff8817faa4ec18 ffff88093f16f930 ffff880302b63980 ffff88093f16f900 Call Trace: [<ffffffffa0363695>] ? fscache_object_work_func+0xa5/0x200 [fscache] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e4ac>] worker_thread+0x21c/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff816460d8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeremy McNicoll <jeremymc@redhat.com> Tested-by: Frank Sorenson <sorenson@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31fscache: Clear outstanding writes when disabling a cookieDavid Howells
fscache_disable_cookie() needs to clear the outstanding writes on the cookie it's disabling because they cannot be completed after. Without this, fscache_nfs_open_file() gets stuck because it disables the cookie when the file is opened for writing but can't uncache the pages till afterwards - otherwise there's a race between the open routine and anyone who already has it open R/O and is still reading from it. Looking in /proc/pid/stack of the offending process shows: [<ffffffffa0142883>] __fscache_wait_on_page_write+0x82/0x9b [fscache] [<ffffffffa014336e>] __fscache_uncache_all_inode_pages+0x91/0xe1 [fscache] [<ffffffffa01740fa>] nfs_fscache_open_file+0x59/0x9e [nfs] [<ffffffffa01ccf41>] nfs4_file_open+0x17f/0x1b8 [nfsv4] [<ffffffff8117350e>] do_dentry_open+0x16d/0x2b7 [<ffffffff811743ac>] vfs_open+0x5c/0x65 [<ffffffff81184185>] path_openat+0x785/0x8fb [<ffffffff81184343>] do_filp_open+0x48/0x9e [<ffffffff81174710>] do_sys_open+0x13b/0x1cb [<ffffffff811747b9>] SyS_open+0x19/0x1b [<ffffffff81001c44>] do_syscall_64+0x80/0x17a [<ffffffff8165c2da>] return_from_SYSCALL_64+0x0/0x7a [<ffffffffffffffff>] 0xffffffffffffffff Reported-by: Jianhong Yin <jiyin@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31FS-Cache: Initialise stores_lock in netfs cookieDavid Howells
Initialise the stores_lock in fscache netfs cookies. Technically, it shouldn't be necessary, since the netfs cookie is an index and stores no data, but initialising it anyway adds insignificant overhead. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31ipv6: fix flow labels when the traffic class is non-0Dimitris Michailidis
ip6_make_flowlabel() determines the flow label for IPv6 packets. It's supposed to be passed a flow label, which it returns as is if non-0 and in some other cases, otherwise it calculates a new value. The problem is callers often pass a flowi6.flowlabel, which may also contain traffic class bits. If the traffic class is non-0 ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and returns the whole thing. Thus it can return a 'flow label' longer than 20b and the low 20b of that is typically 0 resulting in packets with 0 label. Moreover, different packets of a flow may be labeled differently. For a TCP flow with ECN non-payload and payload packets get different labels as exemplified by this pair of consecutive packets: (pure ACK) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49 Payload Length: 32 Next Header: TCP (6) (payload) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000 Payload Length: 688 Next Header: TCP (6) This patch allows ip6_make_flowlabel() to be passed more than just a flow label and has it extract the part it really wants. This was simpler than modifying the callers. With this patch packets like the above become Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 32 Next Header: TCP (6) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 688 Next Header: TCP (6) Signed-off-by: Dimitris Michailidis <dmichail@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-31net: thunderx: avoid dereferencing xcv when NULLVincent
This fixes the following smatch and coccinelle warnings: drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119 xcv_setup_link() error: we previously assumed 'xcv' could be null (see line 118) [smatch] drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119:16-20: ERROR: xcv is NULL but dereferenced. [coccinelle] Fixes: 6465859aba1e66a5 ("net: thunderx: Add RGMII interface type support") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-31svcrpc: fix oops in absence of krb5 moduleJ. Bruce Fields
Olga Kornievskaia says: "I ran into this oops in the nfsd (below) (4.10-rc3 kernel). To trigger this I had a client (unsuccessfully) try to mount the server with krb5 where the server doesn't have the rpcsec_gss_krb5 module built." The problem is that rsci.cred is copied from a svc_cred structure that gss_proxy didn't properly initialize. Fix that. [120408.542387] general protection fault: 0000 [#1] SMP ... [120408.565724] CPU: 0 PID: 3601 Comm: nfsd Not tainted 4.10.0-rc3+ #16 [120408.567037] Hardware name: VMware, Inc. VMware Virtual = Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [120408.569225] task: ffff8800776f95c0 task.stack: ffffc90003d58000 [120408.570483] RIP: 0010:gss_mech_put+0xb/0x20 [auth_rpcgss] ... [120408.584946] ? rsc_free+0x55/0x90 [auth_rpcgss] [120408.585901] gss_proxy_save_rsc+0xb2/0x2a0 [auth_rpcgss] [120408.587017] svcauth_gss_proxy_init+0x3cc/0x520 [auth_rpcgss] [120408.588257] ? __enqueue_entity+0x6c/0x70 [120408.589101] svcauth_gss_accept+0x391/0xb90 [auth_rpcgss] [120408.590212] ? try_to_wake_up+0x4a/0x360 [120408.591036] ? wake_up_process+0x15/0x20 [120408.592093] ? svc_xprt_do_enqueue+0x12e/0x2d0 [sunrpc] [120408.593177] svc_authenticate+0xe1/0x100 [sunrpc] [120408.594168] svc_process_common+0x203/0x710 [sunrpc] [120408.595220] svc_process+0x105/0x1c0 [sunrpc] [120408.596278] nfsd+0xe9/0x160 [nfsd] [120408.597060] kthread+0x101/0x140 [120408.597734] ? nfsd_destroy+0x60/0x60 [nfsd] [120408.598626] ? kthread_park+0x90/0x90 [120408.599448] ret_from_fork+0x22/0x30 Fixes: 1d658336b05f "SUNRPC: Add RPC based upcall mechanism for RPCGSS auth" Cc: stable@vger.kernel.org Cc: Simo Sorce <simo@redhat.com> Reported-by: Olga Kornievskaia <kolga@netapp.com> Tested-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-01-31nfsd: special case truncates some moreChristoph Hellwig
Both the NFS protocols and the Linux VFS use a setattr operation with a bitmap of attributs to set to set various file attributes including the file size and the uid/gid. The Linux syscalls never mixes size updates with unrelated updates like the uid/gid, and some file systems like XFS and GFS2 rely on the fact that truncates might not update random other attributes, and many other file systems handle the case but do not update the different attributes in the same transaction. NFSD on the other hand passes the attributes it gets on the wire more or less directly through to the VFS, leading to updates the file systems don't expect. XFS at least has an assert on the allowed attributes, which caught an unusual NFS client setting the size and group at the same time. To handle this issue properly this switches nfsd to call vfs_truncate for size changes, and then handle all other attributes through notify_change. As a side effect this also means less boilerplace code around the size change as we can now reuse the VFS code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-01-31NFSD: Fix a null reference case in find_or_create_lock_stateid()Kinglong Mee
nfsd assigns the nfs4_free_lock_stateid to .sc_free in init_lock_stateid(). If nfsd doesn't go through init_lock_stateid() and put stateid at end, there is a NULL reference to .sc_free when calling nfs4_put_stid(ns). This patch let the nfs4_stid.sc_free assignment to nfs4_alloc_stid(). Cc: stable@vger.kernel.org Fixes: 356a95ece7aa "nfsd: clean up races in lock stateid searching..." Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-01-31tracing: Fix hwlat kthread migrationSteven Rostedt (VMware)
The hwlat tracer creates a kernel thread at start of the tracer. It is pinned to a single CPU and will move to the next CPU after each period of running. If the user modifies the migration thread's affinity, it will not change after that happens. The original code created the thread at the first instance it was called, but later was changed to destroy the thread after the tracer was finished, and would not be created until the next instance of the tracer was established. The code that initialized the affinity was only called on the initial instantiation of the tracer. After that, it was not initialized, and the previous affinity did not match the current newly created one, making it appear that the user modified the thread's affinity when it did not, and the thread failed to migrate again. Cc: stable@vger.kernel.org Fixes: 0330f7aa8ee6 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-01-31drm/atomic: Fix double free in drm_atomic_state_default_clearMaarten Lankhorst
drm_atomic_helper_page_flip and drm_atomic_ioctl set their own events in crtc_state->event. But when it's set the event is freed in 2 places. Solve this by only freeing the event in the atomic ioctl when it allocated its own event. This has been broken twice. The first time when the code was introduced, but only in the corner case when an event is allocated, but more crtc's were included by atomic check and then failing. This can mostly happen when you do an atomic modeset in i915 and the display clock is changed, which forces all crtc's to be included to the state. This has been broken worse by adding in-fences support, which caused the double free to be done unconditionally. [IGT] kms_rotation_crc: starting subtest primary-rotation-180 ============================================================================= BUG kmalloc-128 (Tainted: G U ): Object already free ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in drm_atomic_helper_setup_commit+0x285/0x2f0 [drm_kms_helper] age=0 cpu=3 pid=1529 ___slab_alloc+0x308/0x3b0 __slab_alloc+0xd/0x20 kmem_cache_alloc_trace+0x92/0x1c0 drm_atomic_helper_setup_commit+0x285/0x2f0 [drm_kms_helper] intel_atomic_commit+0x35/0x4f0 [i915] drm_atomic_commit+0x46/0x50 [drm] drm_mode_atomic_ioctl+0x7d4/0xab0 [drm] drm_ioctl+0x2b3/0x490 [drm] do_vfs_ioctl+0x69c/0x700 SyS_ioctl+0x4e/0x80 entry_SYSCALL_64_fastpath+0x13/0x94 INFO: Freed in drm_event_cancel_free+0xa3/0xb0 [drm] age=0 cpu=3 pid=1529 __slab_free+0x48/0x2e0 kfree+0x159/0x1a0 drm_event_cancel_free+0xa3/0xb0 [drm] drm_mode_atomic_ioctl+0x86d/0xab0 [drm] drm_ioctl+0x2b3/0x490 [drm] do_vfs_ioctl+0x69c/0x700 SyS_ioctl+0x4e/0x80 entry_SYSCALL_64_fastpath+0x13/0x94 INFO: Slab 0xffffde1f0997b080 objects=17 used=2 fp=0xffff92fb65ec2578 flags=0x200000000008101 INFO: Object 0xffff92fb65ec2578 @offset=1400 fp=0xffff92fb65ec2ae8 Redzone ffff92fb65ec2570: bb bb bb bb bb bb bb bb ........ Object ffff92fb65ec2578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec2588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec2598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. Redzone ffff92fb65ec25f8: bb bb bb bb bb bb bb bb ........ Padding ffff92fb65ec2738: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 3 PID: 180 Comm: kworker/3:2 Tainted: G BU 4.10.0-rc6-patser+ #5039 Hardware name: /NUC5PPYB, BIOS PYBSWCEL.86A.0031.2015.0601.1712 06/01/2015 Workqueue: events intel_atomic_helper_free_state [i915] Call Trace: dump_stack+0x4d/0x6d print_trailer+0x20c/0x220 free_debug_processing+0x1c6/0x330 ? drm_atomic_state_default_clear+0xf7/0x1c0 [drm] __slab_free+0x48/0x2e0 ? drm_atomic_state_default_clear+0xf7/0x1c0 [drm] kfree+0x159/0x1a0 drm_atomic_state_default_clear+0xf7/0x1c0 [drm] ? drm_atomic_state_clear+0x30/0x30 [drm] intel_atomic_state_clear+0xd/0x20 [i915] drm_atomic_state_clear+0x1a/0x30 [drm] __drm_atomic_state_free+0x13/0x60 [drm] intel_atomic_helper_free_state+0x5d/0x70 [i915] process_one_work+0x260/0x4a0 worker_thread+0x2d1/0x4f0 kthread+0x127/0x130 ? process_one_work+0x4a0/0x4a0 ? kthread_stop+0x120/0x120 ret_from_fork+0x29/0x40 FIX kmalloc-128: Object at 0xffff92fb65ec2578 not freed Fixes: 3b24f7d67581 ("drm/atomic: Add struct drm_crtc_commit to track async updates") Fixes: 9626014258a5 ("drm/fence: add in-fences support") Cc: <stable@vger.kernel.org> # v4.8+ Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1485854725-27640-1-git-send-email-maarten.lankhorst@linux.intel.com
2017-01-31HID: cp2112: fix gpio-callback error handlingJohan Hovold
In case of a zero-length report, the gpio direction_input callback would currently return success instead of an errno. Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable") Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-31HID: cp2112: fix sleep-while-atomicJohan Hovold
A recent commit fixing DMA-buffers on stack added a shared transfer buffer protected by a spinlock. This is broken as the USB HID request callbacks can sleep. Fix this up by replacing the spinlock with a mutex. Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable") Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-31drm/nouveau/kms/nv50: request vblank events for commits that send completion ↵Ben Skeggs
events This somehow fixes an issue where sync-to-vblank longer works correctly after resume from suspend. From a HW perspective, we don't need the IRQs turned on to be able to detect flip completion, so it's assumed that this is required for the voodoo in the core DRM vblank core. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-01-31drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrievalIlia Mirkin
Based on the xf86-video-nv code, NFORCE (NV1A) and NFORCE2 (NV1F) have a different way of retrieving clocks. See the nv_hw.c:nForceUpdateArbitrationSettings function in the original code for how these clocks were accessed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54587 Cc: stable@vger.kernel.org Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-01-31drm/nouveau/disp/gt215: Fix HDA ELD handling (thus, HDMI audio) on gt215Alastair Bridgewater
Store the ELD correctly, not just enough copies of the first byte to pad out the given ELD size. Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com> Fixes: 120b0c39c756 ("drm/nv50-/disp: audit and version SOR_HDA_ELD method") Cc: stable@vger.kernel.org # v3.17+ Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-01-31drm/nouveau/nouveau/led: prevent compiling the led-code if nouveau=y and leds=mMartin Peres
The proper fix would have been to select LEDS_CLASS but this can lead to a circular dependency, as found out by Arnd. This patch implements Arnd's suggestion instead, at the cost of some auto-magic for a fringe feature. Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Intel's 0-DAY Fixes: 8d021d71b324 ("drm/nouveau/drm/nouveau: add a LED driver for the NVIDIA logo") Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-01-31drm/nouveau/disp/mcp7x: disable dptmds workaroundBen Skeggs
The workaround appears to cause regressions on these boards, and from inspection of RM traces, NVIDIA don't appear to do it on them either. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Roy Spliet <nouveau@spliet.org>
2017-01-31drm/nouveau: prevent userspace from deleting client objectBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-01-31drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffersBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-01-31Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wakeChristophe JAILLET
These tests are reversed. A warning should be displayed if an error is returned, not on success. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Several small bug fixes and tidies, along with a fix for non-resumable memory errors triggered by userspace" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Handle PIO & MEM non-resumable errors. sparc64: Zero pages on allocation for mondo and error queues. sparc: Fixed typo in sstate.c. Replaced panicing with panicking sparc: use symbolic names for tsb indexing
2017-01-30Merge branch 'sparc64-non-resumable-user-error-recovery'David S. Miller
Liam R. Howlett says: ==================== sparc64: Recover from userspace non-resumable PIO & MEM errors A non-resumable error from userspace is able to cause a kernel panic or trap loop due to the setup and handling of the queued traps once in the kernel. This patch series addresses both of these issues. The queues are fixed by simply zeroing the memory before use. PIO errors from userspace will result in a SIGBUS being sent to the user process. The MEM errors form userspace will result in a SIGKILL and also cause the offending pages to be claimed so they are no longer used in future tasks. SIGKILL is used to ensure that the process does not try to coredump and result in an attempt to read the memory again from within kernel space. Although there is a HV call to scrub the memory (mem_scrub), there is no easy way to guarantee that the real memory address(es) are not used by other tasks. Clearing the error with mem_scrub would zero the memory and cause the other processes to proceed with bad data. The handling of other non-resumable errors remain unchanged and will cause a panic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30sparc64: Handle PIO & MEM non-resumable errors.Liam R. Howlett
User processes trying to access an invalid memory address via PIO will receive a SIGBUS signal instead of causing a panic. Memory errors will receive a SIGKILL since a SIGBUS may result in a coredump which may attempt to repeat the faulting access. Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30sparc64: Zero pages on allocation for mondo and error queues.Liam R. Howlett
Error queues use a non-zero first word to detect if the queues are full. Using pages that have not been zeroed may result in false positive overflow events. These queues are set up once during boot so zeroing all mondo and error queue pages is safe. Note that the false positive overflow does not always occur because the page allocation for these queues is so early in the boot cycle that higher number CPUs get fresh pages. It is only when traps are serviced with lower number CPUs who were given already used pages that this issue is exposed. Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net/sched: cls_flower: Correct matching on ICMPv6 codeSimon Horman
When matching on the ICMPv6 code ICMPV6_CODE rather than ICMPV4_CODE attributes should be used. This corrects what appears to be a typo. Sample usage: tc qdisc add dev eth0 ingress tc filter add dev eth0 protocol ipv6 parent ffff: flower \ indev eth0 ip_proto icmpv6 type 128 code 0 action drop Without this change the code parameter above is effectively ignored. Fixes: 7b684884fbfa ("net/sched: cls_flower: Support matching on ICMP type and code") Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'linux-can-fixes-for-4.10-20170130' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-01-30 this is a pull request of one patch. The patch is by Oliver Hartkopp and fixes the hrtimer/tasklet termination in bcm op removal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'rtc-4.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fix from Alexandre Belloni: "A single fix for this cycle. It is worth taking it for 4.10 so that distributions will not have CONFIG_RTC_DRV_JZ4740 switching from m to y in their config. Summary: - Allow jz4740 to build as a module again by using kernel_halt()" * tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: jz4740: make the driver buildable as a module again
2017-01-30ipv6: Paritially checksum full MTU framesVlad Yasevich
IPv6 will mark data that is smaller that mtu - headersize as CHECKSUM_PARTIAL, but if the data will completely fill the mtu, the packet checksum will be computed in software instead. Extend the conditional to include the data that fills the mtu as well. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net/mlx4_core: Avoid command timeouts during VF driver device shutdownJack Morgenstein
Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. The result is that the VF driver on the VM will experience a command timeout during the shutdown process when the Hypervisor does not deliver a command-completion event to the VM. To avoid FW command timeouts on the VM when the driver's shutdown method is invoked, we detect the absence of the VF's comm channel at the very start of the shutdown process. If the comm-channel has already been disabled, we cause all FW commands during the device shutdown process to immediately return success (and thus avoid all command timeouts). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'mlx5-fixes-2017-01-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2017-01-27 A couple of mlx5 core and ethernet driver fixes. From Or, A couple of error return values and error handling fixes. From Hadar, Support TC encapsulation offloads even when the mlx5e uplink device is stacked under an upper device. From Gal, Two patches to fix RSS hash modifications via ethtool. From Moshe, Added a needed ets capability check. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'wireless-drivers-for-davem-2017-01-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 Most important here are fixes to two iwlwifi crashes, but there's also a firmware naming fix for iwlwifi and a revert of an older bcma patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_pageArseny Solokha
In spite of switching to paged allocation of Rx buffers, the driver still called dma_unmap_single() in the Rx queues tear-down path. The DMA region unmapping code in free_skb_rx_queue() basically predates the introduction of paged allocation to the driver. While being refactored, it apparently hasn't reflected the change in the DMA API usage by its counterpart gfar_new_page(). As a result, setting an interface to the DOWN state now yields the following: # ip link set eth2 down fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28 CPU: 1 PID: 189 Comm: ip Tainted: G O 4.9.5 #1 task: dee73400 task.stack: dede2000 NIP: c02101e8 LR: c02101e8 CTR: c0260d74 REGS: dede3bb0 TRAP: 0700 Tainted: G O (4.9.5) MSR: 00021000 <CE,ME> CR: 28002222 XER: 00000000 GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000 GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000 GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000 GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540 NIP [c02101e8] check_unmap+0x8e0/0xa28 LR [c02101e8] check_unmap+0x8e0/0xa28 Call Trace: [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable) [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404 [dede3d80] [c02e39b4] gfar_close+0x24/0xc8 [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8 [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174 [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60 [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824 [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298 [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854 [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74 [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c --- interrupt: c01 at 0xff45da0 LR = 0xff45cd0 Instruction dump: 811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052 386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4 ---[ end trace 695ae6d7ac1d0c47 ]--- Mapped at: [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248 [<c02e3ef0>] startup_gfar+0x368/0x570 [<c036aeb4>] __dev_open+0xdc/0x150 [<c036b1b8>] __dev_change_flags+0xa0/0x174 [<c036b2ac>] dev_change_flags+0x20/0x60 Even though the issue was discovered in 4.9 kernel, the code in question is identical in the current net and net-next trees. Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: ethtool: add support for 2500BaseT and 5000BaseT link modesPavel Belous
This patch introduce support for 2500BaseT and 5000BaseT link modes. These modes are included in the new IEEE 802.3bz standard. Signed-off-by: Pavel Belous <pavel.s.belous@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handlerAlexander Stein
According to VLI64 Intel Atom E3800 Specification Update (#329901) concurrent read accesses may result in returning 0xffffffff and write accesses may be dropped silently. To workaround all accesses must be protected by locks. Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Debounce register is one per communityAndy Shevchenko
Debounce value is set globally per community. Otherwise user will easily get a kernel crash when they start using the feature: BUG: unable to handle kernel paging request at ffffc900003be000 IP: byt_gpio_dbg_show+0xa9/0x430 Make it clear in byt_gpio_reg(). Note that this fix just prevents kernel to crash, but doesn't make any difference to the existing logic. It means the last caller will win the trade and debounce value will be configured accordingly. The actual logic fix needs to be thought about and it's not as important as crash fix. That's why the latter goes separately and right now. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Rectify debounce support (part 2)Andy Shevchenko
The commit 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") almost fixes the logic of debuonce but missed couple of things, i.e. typo in mask when disabling debounce and lack of enabling it back. This patch addresses above issues. Reported-by: Jean Delvare <jdelvare@suse.de> Fixes: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memoryPeter Zijlstra
Andres reported that MMAP2 records for anonymous memory always have their protection field 0. Turns out, someone daft put the prot/flags generation code in the file branch, leaving them unset for anonymous memory. Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Don Zickus <dzickus@redhat.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: anton@ozlabs.org Cc: namhyung@kernel.org Cc: stable@vger.kernel.org # v3.16+ Fixes: f972eb63b100 ("perf: Pass protection and flags bits through mmap2 interface") Link: http://lkml.kernel.org/r/20170126221508.GF6536@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-30perf/core: Fix use-after-free bugPeter Zijlstra
Dmitry reported a KASAN use-after-free on event->group_leader. It turns out there's a hole in perf_remove_from_context() due to event_function_call() not calling its function when the task associated with the event is already dead. In this case the event will have been detached from the task, but the grouping will have been retained, such that group operations might still work properly while there are live child events etc. This does however mean that we can miss a perf_group_detach() call when the group decomposes, this in turn can then lead to use-after-free. Fix it by explicitly doing the group detach if its still required. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # v4.5+ Cc: syzkaller <syzkaller@googlegroups.com> Fixes: 63b6da39bb38 ("perf: Fix perf_event_exit_task() race") Link: http://lkml.kernel.org/r/20170126153955.GD6515@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-30can: bcm: fix hrtimer/tasklet termination in bcm op removalOliver Hartkopp
When removing a bcm tx operation either a hrtimer or a tasklet might run. As the hrtimer triggers its associated tasklet and vice versa we need to take care to mutually terminate both handlers. Reported-by: Michael Josenhans <michael.josenhans@web.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Michael Josenhans <michael.josenhans@web.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-01-30drm: Don't race connector registrationDaniel Vetter
I was under the misconception that the sysfs dev stuff can be fully set up, and then registered all in one step with device_add. That's true for properties and property groups, but not for parents and child devices. Those must be fully registered before you can register a child. Add a bit of tracking to make sure that asynchronous mst connector hotplugging gets this right. For consistency we rely upon the implicit barriers of the connector->mutex, which is taken anyway, to ensure that at least either the connector or device registration call will work out. Mildly tested since I can't reliably reproduce this on my mst box here. Reported-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484237756-2720-1-git-send-email-daniel.vetter@ffwll.ch
2017-01-30drm: prevent double-(un)registration for connectorsDaniel Vetter
If we're unlucky then the registration from a hotplugged connector might race with the final registration step on driver load. And since MST topology discover is asynchronous that's even somewhat likely. v2: Also update the kerneldoc for @registered! v3: Review from Chris: - Improve kerneldoc for late_register/early_unregister callbacks. - Use mutex_destroy. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161218133545.2106-1-daniel.vetter@ffwll.ch (cherry picked from commit e73ab00e9a0f1731f34d0620a9c55f5c30c4ad4e)
2017-01-30x86/microcode: Do not access the initrd after it has been freedBorislav Petkov
When we look for microcode blobs, we first try builtin and if that doesn't succeed, we fallback to the initrd supplied to the kernel. However, at some point doing boot, that initrd gets jettisoned and we shouldn't access it anymore. But we do, as the below KASAN report shows. That's because find_microcode_in_initrd() doesn't check whether the initrd is still valid or not. So do that. ================================================================== BUG: KASAN: use-after-free in find_cpio_data Read of size 1 by task swapper/1/0 page:ffffea0000db9d40 count:0 mapcount:0 mapping: (null) index:0x1 flags: 0x100000000000000() raw: 0100000000000000 0000000000000000 0000000000000001 00000000ffffffff raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.10.0-rc5-debug-00075-g2dbde22 #3 Hardware name: Dell Inc. XPS 13 9360/0839Y6, BIOS 1.2.3 12/01/2016 Call Trace: dump_stack ? _atomic_dec_and_lock ? __dump_page kasan_report_error ? pointer ? find_cpio_data __asan_report_load1_noabort ? find_cpio_data find_cpio_data ? vsprintf ? dump_stack ? get_ucode_user ? print_usage_bug find_microcode_in_initrd __load_ucode_intel ? collect_cpu_info_early ? debug_check_no_locks_freed load_ucode_intel_ap ? collect_cpu_info ? trace_hardirqs_on ? flat_send_IPI_mask_allbutself load_ucode_ap ? get_builtin_firmware ? flush_tlb_func ? do_raw_spin_trylock ? cpumask_weight cpu_init ? trace_hardirqs_off ? play_dead_common ? native_play_dead ? hlt_play_dead ? syscall_init ? arch_cpu_idle_dead ? do_idle start_secondary start_cpu Memory state around the buggy address: ffff880036e74f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e74f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff880036e75000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880036e75080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e75100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Tested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170126165833.evjemhbqzaepirxo@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-30pinctrl: intel: merrifield: Add missed check in mrfld_config_set()Andy Shevchenko
Not every pin can be configured. Add missed check to prevent access violation. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: sunxi: Don't enforce bias disable (for now)Maxime Ripard
Commit 07fe64ba213f ("pinctrl: sunxi: Handle bias disable") actually enforced enforced the disabling of the pull up/down resistors instead of ignoring it like it was done before. This was part of a wider rework to switch to the generic pinconf bindings, and was meant to be merged together with DT patches that were switching to it, and removing what was considered default values by both the binding and the boards. This included no bias on a pin. However, those DT patches were delayed to 4.11, which would be fine only for a significant number boards having the bias setup wrong, which in turns break the MMC on those boards (and possibly other devices too). In order to avoid conflicts as much as possible, bring back the old behaviour for 4.10, and we'll revert that commit once all the DT bits will have landed. Tested-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRESJisheng Zhang
This should be a typo. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30powerpc/mm: Use the correct pointer when setting a 2MB pteReza Arbab
When setting a 2MB pte, radix__map_kernel_page() is using the address ptep = (pte_t *)pudp; Fix this conversion to use pmdp instead. Use pmdp_ptep() to do this instead of casting the pointer. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-29net: adaptec: starfire: add checks for dma mapping errorsAlexey Khoroshilov
init_ring(), refill_rx_ring() and start_tx() don't check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]PauseSean Nyekjaer
As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause" this phy driver should not set these feature bits. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29can: Fix kernel panic at security_sock_rcv_skbEric Dumazet
Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: <IRQ> [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60 [<ffffffff81d55771>] sk_filter+0x41/0x210 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370 [<ffffffff81f07af9>] can_receive+0xd9/0x120 [<ffffffff81f07beb>] can_rcv+0xab/0x100 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0 [<ffffffff81d37f67>] process_backlog+0x127/0x280 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0 [<ffffffff810c88d4>] __do_softirq+0x184/0x440 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40 [<ffffffff810c8bed>] do_softirq+0x1d/0x20 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230 [<ffffffff810e3baf>] process_one_work+0x24f/0x670 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480 [<ffffffff810ebafc>] kthread+0x12c/0x150 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70 Reported-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: macb: Fix 64 bit addressing support for GEMRafal Ozieblo
This patch adds support for 32 bit GEM in 64 bit system. It checks capability at runtime and uses appropriate buffer descriptor. Signed-off-by: Rafal Ozieblo <rafalo@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 02:49:37 +0000