| Age | Commit message (Collapse) | Author |
|---|
|
The events are different among hybrid PMUs. Each hybrid PMU should use
its own event constraints.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-10-git-send-email-kan.liang@linux.intel.com
|
|
The hardware cache events are different among hybrid PMUs. Each hybrid
PMU should have its own hw cache event table.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-9-git-send-email-kan.liang@linux.intel.com
|
|
The unconstrained value depends on the number of GP and fixed counters.
Each hybrid PMU should use its own unconstrained.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-8-git-send-email-kan.liang@linux.intel.com
|
|
The number of GP and fixed counters are different among hybrid PMUs.
Each hybrid PMU should use its own counter related information.
When handling a certain hybrid PMU, apply the number of counters from
the corresponding hybrid PMU.
When reserving the counters in the initialization of a new event,
reserve all possible counters.
The number of counter recored in the global x86_pmu is for the
architecture counters which are available for all hybrid PMUs. KVM
doesn't support the hybrid PMU yet. Return the number of the
architecture counters for now.
For the functions only available for the old platforms, e.g.,
intel_pmu_drain_pebs_nhm(), nothing is changed.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-7-git-send-email-kan.liang@linux.intel.com
|
|
The intel_ctrl is the counter mask of a PMU. The PMU counter information
may be different among hybrid PMUs, each hybrid PMU should use its own
intel_ctrl to check and access the counters.
When handling a certain hybrid PMU, apply the intel_ctrl from the
corresponding hybrid PMU.
When checking the HW existence, apply the PMU and number of counters
from the corresponding hybrid PMU as well. Perf will check the HW
existence for each Hybrid PMU before registration. Expose the
check_hw_exists() for a later patch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1618237865-33448-6-git-send-email-kan.liang@linux.intel.com
|
|
Some platforms, e.g. Alder Lake, have hybrid architecture. Although most
PMU capabilities are the same, there are still some unique PMU
capabilities for different hybrid PMUs. Perf should register a dedicated
pmu for each hybrid PMU.
Add a new struct x86_hybrid_pmu, which saves the dedicated pmu and
capabilities for each hybrid PMU.
The architecture MSR, MSR_IA32_PERF_CAPABILITIES, only indicates the
architecture features which are available on all hybrid PMUs. The
architecture features are stored in the global x86_pmu.intel_cap.
For Alder Lake, the model-specific features are perf metrics and
PEBS-via-PT. The corresponding bits of the global x86_pmu.intel_cap
should be 0 for these two features. Perf should not use the global
intel_cap to check the features on a hybrid system.
Add a dedicated intel_cap in the x86_hybrid_pmu to store the
model-specific capabilities. Use the dedicated intel_cap to replace
the global intel_cap for thse two features. The dedicated intel_cap
will be set in the following "Add Alder Lake Hybrid support" patch.
Add is_hybrid() to distinguish a hybrid system. ADL may have an
alternative configuration. With that configuration, the
X86_FEATURE_HYBRID_CPU is not set. Perf cannot rely on the feature bit.
Add a new static_key_false, perf_is_hybrid, to indicate a hybrid system.
It will be assigned in the following "Add Alder Lake Hybrid support"
patch as well.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-5-git-send-email-kan.liang@linux.intel.com
|
|
Some platforms, e.g. Alder Lake, have hybrid architecture. In the same
package, there may be more than one type of CPU. The PMU capabilities
are different among different types of CPU. Perf will register a
dedicated PMU for each type of CPU.
Add a 'pmu' variable in the struct cpu_hw_events to track the dedicated
PMU of the current CPU.
Current x86_get_pmu() use the global 'pmu', which will be broken on a
hybrid platform. Modify it to apply the 'pmu' of the specific CPU.
Initialize the per-CPU 'pmu' variable with the global 'pmu'. There is
nothing changed for the non-hybrid platforms.
The is_x86_event() will be updated in the later patch ("perf/x86:
Register hybrid PMUs") for hybrid platforms. For the non-hybrid
platforms, nothing is changed here.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-4-git-send-email-kan.liang@linux.intel.com
|
|
On processors with Intel Hybrid Technology (i.e., one having more than
one type of CPU in the same package), all CPUs support the same
instruction set and enumerate the same features on CPUID. Thus, all
software can run on any CPU without restrictions. However, there may be
model-specific differences among types of CPUs. For instance, each type
of CPU may support a different number of performance counters. Also,
machine check error banks may be wired differently. Even though most
software will not care about these differences, kernel subsystems
dealing with these differences must know.
Add and expose a new helper function get_this_hybrid_cpu_type() to query
the type of the current hybrid CPU. The function will be used later in
the perf subsystem.
The Intel Software Developer's Manual defines the CPU type as 8-bit
identifier.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1618237865-33448-3-git-send-email-kan.liang@linux.intel.com
|
|
Add feature enumeration to identify a processor with Intel Hybrid
Technology: one in which CPUs of more than one type are the same package.
On a hybrid processor, all CPUs support the same homogeneous (i.e.,
symmetric) instruction set. All CPUs enumerate the same features in CPUID.
Thus, software (user space and kernel) can run and migrate to any CPU in
the system as well as utilize any of the enumerated features without any
change or special provisions. The main difference among CPUs in a hybrid
processor are power and performance properties.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1618237865-33448-2-git-send-email-kan.liang@linux.intel.com
|
|
dev_attr_show() calls the __uncore_*_show() functions via an indirect
call but their type does not currently match the type of the show()
member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.
$ cat /sys/devices/amd_l3/format/umask
config:8-15
$ dmesg | grep "CFI failure"
[ 1258.174653] CFI failure (target: __uncore_umask_show...):
Update the type in the DEFINE_UNCORE_FORMAT_ATTR macro to match
'struct device_attribute' so that there is no more CFI violation.
Fixes: 06f2c24584f3 ("perf/amd/uncore: Prepare to scale for more attributes that vary per family")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-2-nathan@kernel.org
|
|
dev_attr_show() calls _iommu_event_show() via an indirect call but
_iommu_event_show()'s type does not currently match the type of the
show() member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.
$ cat /sys/devices/amd_iommu_1/events/mem_dte_hit
csource=0x0a
$ dmesg | grep "CFI failure"
[ 3526.735140] CFI failure (target: _iommu_event_show...):
Change _iommu_event_show() and 'struct amd_iommu_event_desc' to
'struct device_attribute' so that there is no more CFI violation.
Fixes: 7be6296fdd75 ("perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-1-nathan@kernel.org
|
|
This patch adds a new software event to count context switches
involving cgroup switches. So it's counted only if cgroups of
previous and next tasks are different. Note that it only checks the
cgroups in the perf_event subsystem. For cgroup v2, it shouldn't
matter anyway.
One can argue that we can do this by using existing sched_switch event
with eBPF. But some systems might not have eBPF for some reason so
I'd like to add this as a simple way.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210210083327.22726-2-namhyung@kernel.org
|
|
In some cases, we need to check more than whether the software event
is enabled. So split the condition check and the actual event
handling. This is a preparation for the next change.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210210083327.22726-1-namhyung@kernel.org
|
|
The 'running' variable is only used in the P4 PMU. Current perf sets the
variable in the critical function x86_pmu_start(), which wastes cycles
for everybody not running on P4.
Move cpuc->running into the P4 specific p4_pmu_enable_event().
Add a static per-CPU 'p4_running' variable to replace the 'running'
variable in the struct cpu_hw_events. Saves space for the generic
structure.
The p4_pmu_enable_all() also invokes the p4_pmu_enable_event(), but it
should not set cpuc->running. Factor out __p4_pmu_enable_event() for
p4_pmu_enable_all().
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618410990-21383-1-git-send-email-kan.liang@linux.intel.com
|
|
Add kselftest to test that remove_on_exec removes inherited events from
child tasks.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-9-elver@google.com
|
|
Add a kselftest for testing process-wide perf events with synchronous
SIGTRAP on events (using breakpoints). In particular, we want to test
that changes to the event propagate to all children, and the SIGTRAPs
are in fact synchronously sent to the thread where the event occurred.
Note: The "signal_stress" test case is also added later in the series to
perf tool's built-in tests. The test here is more elaborate in that
respect, which on one hand avoids bloating the perf tool unnecessarily,
but we also benefit from structured tests with TAP-compliant output that
the kselftest framework provides.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-8-elver@google.com
|
|
Adds bit perf_event_attr::sigtrap, which can be set to cause events to
send SIGTRAP (with si_code TRAP_PERF) to the task where the event
occurred. The primary motivation is to support synchronous signals on
perf events in the task where an event (such as breakpoints) triggered.
To distinguish perf events based on the event type, the type is set in
si_errno. For events that are associated with an address, si_addr is
copied from perf_sample_data.
The new field perf_event_attr::sig_data is copied to si_perf, which
allows user space to disambiguate which event (of the same type)
triggered the signal. For example, user space could encode the relevant
information it cares about in sig_data.
We note that the choice of an opaque u64 provides the simplest and most
flexible option. Alternatives where a reference to some user space data
is passed back suffer from the problem that modification of referenced
data (be it the event fd, or the perf_event_attr) can race with the
signal being delivered (of course, the same caveat applies if user space
decides to store a pointer in sig_data, but the ABI explicitly avoids
prescribing such a design).
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/lkml/YBv3rAT566k+6zjg@hirez.programming.kicks-ass.net/
|
|
Introduces the TRAP_PERF si_code, and associated siginfo_t field
si_perf. These will be used by the perf event subsystem to send signals
(if requested) to the task where an event occurred.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de> # asm-generic
Link: https://lkml.kernel.org/r/20210408103605.1676875-6-elver@google.com
|
|
Adds bit perf_event_attr::remove_on_exec, to support removing an event
from a task on exec.
This option supports the case where an event is supposed to be
process-wide only, and should not propagate beyond exec, to limit
monitoring to the original process image only.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-5-elver@google.com
|
|
Adds bit perf_event_attr::inherit_thread, to restricting inheriting
events only if the child was cloned with CLONE_THREAD.
This option supports the case where an event is supposed to be
process-wide only (including subthreads), but should not propagate
beyond the current process's shared environment.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YBvj6eJR%2FDY2TsEB@hirez.programming.kicks-ass.net/
|
|
As with other ioctls (such as PERF_EVENT_IOC_{ENABLE,DISABLE}), fix up
handling of PERF_EVENT_IOC_MODIFY_ATTRIBUTES to also apply to children.
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/20210408103605.1676875-3-elver@google.com
|
|
Make perf_event_exit_event() more robust, such that we can use it from
other contexts. Specifically the up and coming remove_on_exec.
For this to work we need to address a few issues. Remove_on_exec will
not destroy the entire context, so we cannot rely on TASK_TOMBSTONE to
disable event_function_call() and we thus have to use
perf_remove_from_context().
When using perf_remove_from_context(), there's two races to consider.
The first is against close(), where we can have concurrent tear-down
of the event. The second is against child_list iteration, which should
not find a half baked event.
To address this, teach perf_remove_from_context() to special case
!ctx->is_active and about DETACH_CHILD.
[ elver@google.com: fix racing parent/child exit in sync_child_event(). ]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-2-elver@google.com
|
|
Turns out, the default setting of attr.aux_watermark to half of the total
buffer size is not very useful, especially with smaller buffers. The
problem is that, after half of the buffer is filled up, the kernel updates
->aux_head and sets up the next "transaction", while observing that
->aux_tail is still zero (as userspace haven't had the chance to update
it), meaning that the trace will have to stop at the end of this second
"transaction". This means, for example, that the second PERF_RECORD_AUX in
every trace comes with TRUNCATED flag set.
Setting attr.aux_watermark to quarter of the buffer gives enough space for
the ->aux_tail update to be observed and prevents the data loss.
The obligatory before/after showcase:
> # perf_before record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 6 times to write data ]
> Warning:
> AUX data lost 4 times out of 10!
>
> [ perf record: Captured and wrote 0.099 MB perf.data ]
> # perf record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 4 times to write data ]
> [ perf record: Captured and wrote 0.039 MB perf.data ]
The effect is still visible with large workloads and large buffers,
although less pronounced.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210414154955.49603-3-alexander.shishkin@linux.intel.com
|
|
Currently, we start allocating AUX pages half the size of the total
requested AUX buffer size, ignoring the attr.aux_watermark setting. This,
in turn, makes intel_pt driver disregard the watermark also, as it uses
page order for its SG (ToPA) configuration.
Now, this can be fixed in the intel_pt PMU driver, but seeing as it's the
only one currently making use of high order allocations, there is no
reason not to fix the allocator instead. This way, any other driver
wishing to add this support would not have to worry about this.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210414154955.49603-2-alexander.shishkin@linux.intel.com
|
|
IIO stacks to PMON mapping on Skylake servers is exposed through introduced
early attributes /sys/devices/uncore_iio_<pmu_idx>/dieX, where dieX is a
file which holds "Segment:Root Bus" for PCIe root port which can
be monitored by that IIO PMON block. These sysfs attributes are disabled
for multiple segment topologies except VMD domains which start at 0x10000.
This patch removes the limitation and enables IIO stacks to PMON mapping
for multi-segment Skylake servers by introducing segment-aware
intel_uncore_topology structure and attributing the topology configuration
to the segment in skx_iio_get_topology() function.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Kyle Meyer <kyle.meyer@hpe.com>
Link: https://lkml.kernel.org/r/20210323150507.2013-1-alexander.antonov@linux.intel.com
|
|
The discovery table provides the generic uncore block information
for the MMIO type of uncore blocks, which is good enough to provide
basic uncore support.
The box control field is composed of the BAR address and box control
offset. When initializing the uncore blocks, perf should ioremap the
address from the box control field.
Implement the generic support for the MMIO type of uncore block.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-6-git-send-email-kan.liang@linux.intel.com
|
|
The discovery table provides the generic uncore block information
for the PCI type of uncore blocks, which is good enough to provide
basic uncore support.
The PCI BUS and DEVFN information can be retrieved from the box control
field. Introduce the uncore_pci_pmus_register() to register all the
PCICFG type of uncore blocks. The old PCI probe/remove way is dropped.
The PCI BUS and DEVFN information are different among dies. Add box_ctls
to store the box control field of each die.
Add a new BUS notifier for the PCI type of uncore block to support the
hotplug. If the device is "hot remove", the corresponding registered PMU
has to be unregistered. Perf cannot locate the PMU by searching a const
pci_device_id table, because the discovery tables don't provide such
information. Introduce uncore_pci_find_dev_pmu_from_types() to search
the whole uncore_pci_uncores for the PMU.
Implement generic support for the PCI type of uncore block.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-5-git-send-email-kan.liang@linux.intel.com
|
|
Perf will use a similar method to the PCI sub driver to register
the PMUs for the PCI type of uncore blocks. The method requires a BUS
notifier to support hotplug. The current BUS notifier cannot be reused,
because it searches a const id_table for the corresponding registered
PMU. The PCI type of uncore blocks in the discovery tables doesn't
provide an id_table.
Factor out uncore_bus_notify() and add the pointer of an id_table as a
parameter. The uncore_bus_notify() will be reused in the following
patch.
The current BUS notifier is only used by the PCI sub driver. Its name is
too generic. Rename it to uncore_pci_sub_notifier, which is specific for
the PCI sub driver.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-4-git-send-email-kan.liang@linux.intel.com
|
|
The discovery table provides the generic uncore block information for
the MSR type of uncore blocks, e.g., the counter width, the number of
counters, the location of control/counter registers, which is good
enough to provide basic uncore support. It can be used as a fallback
solution when the kernel doesn't support a platform.
The name of the uncore box cannot be retrieved from the discovery table.
uncore_type_&typeID_&boxID will be used as its name. Save the type ID
and the box ID information in the struct intel_uncore_type.
Factor out uncore_get_pmu_name() to handle different naming methods.
Implement generic support for the MSR type of uncore block.
Some advanced features, such as filters and constraints, cannot be
retrieved from discovery tables. Features that rely on that
information are not be supported here.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-3-git-send-email-kan.liang@linux.intel.com
|
|
A self-describing mechanism for the uncore PerfMon hardware has been
introduced with the latest Intel platforms. By reading through an MMIO
page worth of information, perf can 'discover' all the standard uncore
PerfMon registers in a machine.
The discovery mechanism relies on BIOS's support. With a proper BIOS,
a PCI device with the unique capability ID 0x23 can be found on each
die. Perf can retrieve the information of all available uncore PerfMons
from the device via MMIO. The information is composed of one global
discovery table and several unit discovery tables.
- The global discovery table includes global uncore information of the
die, e.g., the address of the global control register, the offset of
the global status register, the number of uncore units, the offset of
unit discovery tables, etc.
- The unit discovery table includes generic uncore unit information,
e.g., the access type, the counter width, the address of counters,
the address of the counter control, the unit ID, the unit type, etc.
The unit is also called "box" in the code.
Perf can provide basic uncore support based on this information
with the following patches.
To locate the PCI device with the discovery tables, check the generic
PCI ID first. If it doesn't match, go through the entire PCI device tree
and locate the device with the unique capability ID.
The uncore information is similar among dies. To save parsing time and
space, only completely parse and store the discovery tables on the first
die and the first box of each die. The parsed information is stored in
an
RB tree structure, intel_uncore_discovery_type. The size of the stored
discovery tables varies among platforms. It's around 4KB for a Sapphire
Rapids server.
If a BIOS doesn't support the 'discovery' mechanism, the uncore driver
will exit with -ENODEV. There is nothing changed.
Add a module parameter to disable the discovery feature. If a BIOS gets
the discovery tables wrong, users can have an option to disable the
feature. For the current patchset, the uncore driver will exit with
-ENODEV. In the future, it may fall back to the hardcode uncore driver
on a known platform.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-2-git-send-email-kan.liang@linux.intel.com
|
|
Currently, the lockdown state is queried unconditionally, even though
its result is used only if the PERF_SAMPLE_REGS_INTR bit is set in
attr.sample_type. While that doesn't matter in case of the Lockdown LSM,
it causes trouble with the SELinux's lockdown hook implementation.
SELinux implements the locked_down hook with a check whether the current
task's type has the corresponding "lockdown" class permission
("integrity" or "confidentiality") allowed in the policy. This means
that calling the hook when the access control decision would be ignored
generates a bogus permission check and audit record.
Fix this by checking sample_type first and only calling the hook when
its result would be honored.
Fixes: b0c8fdc7fdb7 ("lockdown: Lock down perf when in confidentiality mode")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lkml.kernel.org/r/20210224215628.192519-1-omosnace@redhat.com
|
|
For cpu events, it'd better allocating them in the corresponding node
memory as they would be mostly accessed by the target cpu. Although
perf tools sets the cpu affinity before calling perf_event_open, there
are places it doesn't (notably perf record) and we should consider
other external users too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311115413.444407-2-namhyung@kernel.org
|
|
The kernel can allocate a lot of struct perf_event when profiling. For
example, 256 cpu x 8 events x 20 cgroups = 40K instances of the struct
would be allocated on a large system.
The size of struct perf_event in my setup is 1152 byte. As it's
allocated by kmalloc, the actual allocation size would be rounded up
to 2K.
Then there's 896 byte (~43%) of waste per instance resulting in total
~35MB with 40K instances. We can create a dedicated kmem_cache to
avoid such a big unnecessary memory consumption.
With this change, I can see below (note this machine has 112 cpus).
# grep perf_event /proc/slabinfo
perf_event 224 784 1152 7 2 : tunables 24 12 8 : slabdata 112 112 0
The sixth column is pages-per-slab which is 2, and the fifth column is
obj-per-slab which is 7. Thus actually it can use 1152 x 7 = 8064
byte in the 8K, and wasted memory is (8192 - 8064) / 7 = ~18 byte per
instance.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311115413.444407-1-namhyung@kernel.org
|
|
I found the ring buffer pages are allocated in the node but the ring
buffer itself is not. Let's convert it to use kzalloc_node() too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210315033436.682438-1-namhyung@kernel.org
|
|
|
|
Doing a
prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1);
will copy 1 byte from userspace to (quite big) on-stack array
and then stash everything to mm->saved_auxv.
AT_NULL terminator will be inserted at the very end.
/proc/*/auxv handler will find that AT_NULL terminator
and copy original stack contents to userspace.
This devious scheme requires CAP_SYS_RESOURCE.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of irqchip updates:
- Make the GENERIC_IRQ_MULTI_HANDLER configuration correct
- Add a missing DT compatible string for the Ingenic driver
- Remove the pointless debugfs_file pointer from struct irqdomain"
* tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Add support for the JZ4760
dt-bindings/irq: Add compatible string for the JZ4760B
irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER
ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
irqdomain: Remove debugfs_file from struct irq_domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix in for hrtimers to prevent an interrupt storm caused by
the lack of reevaluation of the timers which expire in softirq context
under certain circumstances, e.g. when the clock was set"
* tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent a NULL pointer dereference in the migration_stop_cpu()
mechanims
- Prevent self concurrency of affine_move_task()
- Small fixes and cleanups related to task migration/affinity setting
- Ensure that sync_runqueues_membarrier_state() is invoked on the
current CPU when it is in the cpu mask"
* tag 'sched-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/membarrier: fix missing local execution of ipi_sync_rq_state()
sched: Simplify set_affinity_pending refcounts
sched: Fix affine_move_task() self-concurrency
sched: Optimize migration_cpu_stop()
sched: Collate affine_move_task() stoppers
sched: Simplify migration_cpu_stop()
sched: Fix migration_cpu_stop() requeueing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single objtool fix to handle the PUSHF/POPF validation correctly for
the paravirt changes which modified arch_local_irq_restore not to use
popf"
* tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool,x86: Fix uaccess PUSHF/POPF validation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A couple of locking fixes:
- A fix for the static_call mechanism so it handles unaligned
addresses correctly.
- Make u64_stats_init() a macro so every instance gets a seperate
lockdep key.
- Make seqcount_latch_init() a macro as well to preserve the static
variable which is used for the lockdep key"
* tag 'locking-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
seqlock,lockdep: Fix seqcount_latch_init()
u64_stats,lockdep: Fix u64_stats_init() vs lockdep
static_call: Fix the module key fixup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure PMU internal buffers are flushed for per-CPU events too and
properly handle PID/TID for large PEBS.
- Handle the case properly when there's no PMU and therefore return an
empty list of perf MSRs for VMX to switch instead of reading random
garbage from the stack.
* tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Use RET0 as default for guest_get_msrs to handle "no PMU" case
perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
perf/core: Flush PMU internal buffers for per-CPU events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Ard Biesheuvel via Borislav Petkov:
"Fix an oversight in the handling of EFI_RT_PROPERTIES_TABLE, which was
added v5.10, but failed to take the SetVirtualAddressMap() RT service
into account"
* tag 'efi-urgent-for-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A couple of SEV-ES fixes and robustifications: verify usermode stack
pointer in NMI is not coming from the syscall gap, correctly track
IRQ states in the #VC handler and access user insn bytes atomically
in same handler as latter cannot sleep.
- Balance 32-bit fast syscall exit path to do the proper work on exit
and thus not confuse audit and ptrace frameworks.
- Two fixes for the ORC unwinder going "off the rails" into KASAN
redzones and when ORC data is missing.
* tag 'x86_urgent_for_v5.12_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __copy_from_user_inatomic()
x86/sev-es: Correctly track IRQ states in runtime #VC handler
x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack
x86/sev-es: Introduce ip_within_syscall_gap() helper
x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls
x86/unwind/orc: Silence warnings caused by missing ORC data
x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.12:
- Fix wrong instruction encoding for lis in ppc_function_entry(),
which could potentially lead to missed kprobes.
- Fix SET_FULL_REGS on 32-bit and 64e, which prevented ptrace of
non-volatile GPRs immediately after exec.
- Clean up a missed SRR specifier in the recent interrupt rework.
- Don't treat unrecoverable_exception() as an interrupt handler, it's
called from other handlers so shouldn't do the interrupt entry/exit
accounting itself.
- Fix build errors caused by missing declarations for
[en/dis]able_kernel_vsx().
Thanks to Christophe Leroy, Daniel Axtens, Geert Uytterhoeven, Jiri
Olsa, Naveen N. Rao, and Nicholas Piggin"
* tag 'powerpc-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/traps: unrecoverable_exception() is not an interrupt handler
powerpc: Fix missing declaration of [en/dis]able_kernel_vsx()
powerpc/64s/exception: Clean up a missed SRR specifier
powerpc: Fix inverted SET_FULL_REGS bitop
powerpc/64s: Use symbolic macros for function entry encoding
powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()
|
|
Pull KVM fixes from Paolo Bonzini:
"More fixes for ARM and x86"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: LAPIC: Advancing the timer expiration on guest initiated write
KVM: x86/mmu: Skip !MMU-present SPTEs when removing SP in exclusive mode
KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged
kvm: x86: annotate RCU pointers
KVM: arm64: Fix exclusive limit for IPA size
KVM: arm64: Reject VM creation when the default IPA size is unsupported
KVM: arm64: Ensure I-cache isolation between vcpus of a same VM
KVM: arm64: Don't use cbz/adr with external symbols
KVM: arm64: Fix range alignment when walking page tables
KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility
KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config()
KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is available
KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static key
KVM: arm64: Fix nVHE hyp panic host context restore
KVM: arm64: Avoid corrupting vCPU context register in guest exit
KVM: arm64: nvhe: Save the SPE context early
kvm: x86: use NULL instead of using plain integer as pointer
KVM: SVM: Connect 'npt' module param to KVM's internal 'npt_enabled'
KVM: x86: Ensure deadline timer has truly expired before posting its IRQ
|
|
Merge misc fixes from Andrew Morton:
"28 patches.
Subsystems affected by this series: mm (memblock, pagealloc, hugetlb,
highmem, kfence, oom-kill, madvise, kasan, userfaultfd, memcg, and
zram), core-kernel, kconfig, fork, binfmt, MAINTAINERS, kbuild, and
ia64"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits)
zram: fix broken page writeback
zram: fix return value on writeback_store
mm/memcg: set memcg when splitting page
mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument
ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
mm/userfaultfd: fix memory corruption due to writeprotect
kasan: fix KASAN_STACK dependency for HW_TAGS
kasan, mm: fix crash with HW_TAGS and DEBUG_PAGEALLOC
mm/madvise: replace ptrace attach requirement for process_madvise
include/linux/sched/mm.h: use rcu_dereference in in_vfork()
kfence: fix reports if constant function prefixes exist
kfence, slab: fix cache_alloc_debugcheck_after() for bulk allocations
kfence: fix printk format for ptrdiff_t
linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP*
MAINTAINERS: exclude uapi directories in API/ABI section
binfmt_misc: fix possible deadlock in bm_register_write
mm/highmem.c: fix zero_user_segments() with start > end
hugetlb: do early cow when page pinned on src mm
mm: use is_cow_mapping() across tree where proper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- More compatible strings for the Ingenic irqchip (introducing the
JZ4760B SoC)
- Select GENERIC_IRQ_MULTI_HANDLER on the ARM ep93xx platform
- Drop all GENERIC_IRQ_MULTI_HANDLER selections from the irqchip
Kconfig, now relying on the architecture to get it right
- Drop the debugfs_file field from struct irq_domain, now that
debugfs can track things on its own
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small misc/char driver fixes to resolve some reported
problems:
- habanalabs driver fixes
- Acrn build fixes (reported many times)
- pvpanic module table export fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc/pvpanic: Export module FDT device table
misc: fastrpc: restrict user apps from sending kernel RPC messages
virt: acrn: Correct type casting of argument of copy_from_user()
virt: acrn: Use EPOLLIN instead of POLLIN
virt: acrn: Use vfs_poll() instead of f_op->poll()
virt: acrn: Make remove_cpu sysfs invisible with !CONFIG_HOTPLUG_CPU
cpu/hotplug: Fix build error of using {add,remove}_cpu() with !CONFIG_SMP
habanalabs: fix debugfs address translation
habanalabs: Disable file operations after device is removed
habanalabs: Call put_pid() when releasing control device
drivers: habanalabs: remove unused dentry pointer for debugfs files
habanalabs: mark hl_eq_inc_ptr() as static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for reported problems. They
include:
- wfx header file cleanup patch reverted as it could cause problems
- comedi driver endian fixes
- buffer overflow problems for staging wifi drivers
- build dependency issue for rtl8192e driver
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
Revert "staging: wfx: remove unused included header files"
staging: rtl8188eu: prevent ->ssid overflow in rtw_wx_set_scan()
staging: rtl8188eu: fix potential memory corruption in rtw_check_beacon_data()
staging: rtl8192u: fix ->ssid overflow in r8192_wx_set_scan()
staging: comedi: pcl726: Use 16-bit 0 for interrupt data
staging: comedi: ni_65xx: Use 16-bit 0 for interrupt data
staging: comedi: ni_6527: Use 16-bit 0 for interrupt data
staging: comedi: comedi_parport: Use 16-bit 0 for interrupt data
staging: comedi: amplc_pc236_common: Use 16-bit 0 for interrupt data
staging: comedi: pcl818: Fix endian problem for AI command data
staging: comedi: pcl711: Fix endian problem for AI command data
staging: comedi: me4000: Fix endian problem for AI command data
staging: comedi: dmm32at: Fix endian problem for AI command data
staging: comedi: das800: Fix endian problem for AI command data
staging: comedi: das6402: Fix endian problem for AI command data
staging: comedi: adv_pci1710: Fix endian problem for AI command data
staging: comedi: addi_apci_1500: Fix endian problem for command sample
staging: comedi: addi_apci_1032: Fix endian problem for COS sample
staging: ks7010: prevent buffer overflow in ks_wlan_set_scan()
staging: rtl8712: Fix possible buffer overflow in r8712_sitesurvey_cmd
...
|
