summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8723b1ant.cLarry Finger
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:1875:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b1ant.c:2253:3-5: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8821a1ant.cLarry Finger
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1771:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:2126:3-5: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: Fix if == else warnings in halbtc8821a2ant.cLarry Finger
The 0-DAY kernel test infrastructure reports the following: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3023:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3035:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3037:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3047:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3075:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3085:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3129:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3141:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3143:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3153:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3179:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3181:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3192:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2677:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2833:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2847:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2857:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2885:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2895:3-5: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2940:1-3: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2788:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2391:2-4: WARNING: possible condition with no effect (if == else) drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2417:2-4: WARNING: possible condition with no effect (if == else) Reported-by: kbuild-all@01.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15mwifiex: don't enable/disable IRQ 0 during suspend/resumeBrian Norris
If we don't have an out-of-band wakeup IRQ configured through DT (as most platforms don't), then we fall out of this function with 'irq_wakeup == 0'. Other code (e.g., mwifiex_disable_wake() and mwifiex_enable_wake()) treats 'irq_wakeup >= 0' as a valid IRQ, and so we end up calling {enable,disable}_irq() on IRQ 0. That seems bad, so let's not do that. Same problem as fixed in this patch: https://patchwork.kernel.org/patch/9531693/ [PATCH v2 2/3] btmrvl: set irq_bt to -1 when failed to parse it with the difference that: (a) this one is actually a regression and (b) this affects both device tree and non-device-tree systems While fixing the regression, also drop the verbosity on the parse failure, so we don't see this when a DT node is present but doesn't have an interrupt property (this is perfectly legal): [ 21.999000] mwifiex_pcie 0000:01:00.0: fail to parse irq_wakeup from device tree Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Rajat Jain <rajatja@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15orinoco: Use net_device_stats from struct net_deviceTobias Klauser
Instead of using a private copy of struct net_device_stats in struct orinoco_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15rtlwifi: btcoexist: fix semicolon.cocci warningsJulia Lawall
Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15wlcore: disable multicast filter in AP modeIain Hunter
Enable AP support for allmulticast for MDNS. It can be enabled by bringing up the interface with ip command with argument allmulticast on Signed-off-by: Iain Hunter <i-hunter1@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-15xfrm: Export xfrm_parse_spi.Steffen Klassert
We need it in the ESP offload handlers, so export it. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15net: Prepare gro for packet consuming gro callbacksSteffen Klassert
The upcomming IPsec ESP gro callbacks will consume the skb, so prepare for that. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15net: Add a skb_gro_flush_final helper.Steffen Klassert
Add a skb_gro_flush_final helper to prepare for consuming skbs in call_gro_receive. We will extend this helper to not touch the skb if the skb is consumed by a gro callback with a followup patch. We need this to handle the upcomming IPsec ESP callbacks as they reinject the skb to the napi_gro_receive asynchronous. The handler is used in all gro_receive functions that can call the ESP gro handlers. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Add a secpath_set helper.Steffen Klassert
Add a new helper to set the secpath to the skb. This avoids code duplication, as this is used in multiple places. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-14net: ethernet: ti: cpsw: use var instead of func for usage countIvan Khoronzhuk
The usage count function is based on ndev_running flag that is updated before calling ndo_open/close, but if ndo is called in another place, as with suspend/resume, the counter is not changed, that breaks sus/resume. For common resource no difference which device is using it, does matter only device count. So, replace usage count function on var and inc and dec it in ndo_open/close. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14bpf: kernel header files need to be copied into the tools directoryStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14tcp: tcp_probe: use spin_lock_bh()Eric Dumazet
tcp_rcv_established() can now run in process context. We need to disable BH while acquiring tcp probe spinlock, or risk a deadlock. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ricardo Nabinger Sanchez <rnsanchez@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14uapi: fix linux/if_pppol2tp.h userspace compilation errorsDmitry V. Levin
Because of <linux/libc-compat.h> interface limitations, <netinet/in.h> provided by libc cannot be included after <linux/in.h>, therefore any header that includes <netinet/in.h> cannot be included after <linux/in.h>. Change uapi/linux/l2tp.h, the last uapi header that includes <netinet/in.h>, to include <linux/in.h> and <linux/in6.h> instead of <netinet/in.h> and use __SOCK_SIZE__ instead of sizeof(struct sockaddr) the same way as uapi/linux/in.h does, to fix linux/if_pppol2tp.h userspace compilation errors like this: In file included from /usr/include/linux/l2tp.h:12:0, from /usr/include/linux/if_pppol2tp.h:21, /usr/include/netinet/in.h:31:8: error: redefinition of 'struct in_addr' Fixes: 47c3e7783be4 ("net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14Revert "i2c: designware: detect when dynamic tar update is possible"Jarkko Nikula
This reverts commit 63d0f0a6952a1a02bc4f116b7da7c7887e46efa3. It caused a regression on platforms where I2C controller is synthesized with dynamic TAR update disabled. Detection code is testing is bit DW_IC_CON_10BITADDR_MASTER in register DW_IC_CON read-only but fails to restore original value in case bit is read-write. Instead of fixing this we revert the commit since it was preparation for the commit 0317e6c0f1dc ("i2c: designware: do not disable adapter after transfer") which was also reverted. Reported-by: Shah Nehal-Bakulchandra <Nehal-bakulchandra.Shah@amd.com> Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-By: Lucas De Marchi <lucas.demarchi@intel.com> Cc: <stable@vger.kernel.org> # v4.9+ Fixes: 63d0f0a6952a ("i2c: designware: detect when dynamic tar update is possible") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-14[media] siano: make it work again with CONFIG_VMAP_STACKMauro Carvalho Chehab
Reported as a Kaffeine bug: https://bugs.kde.org/show_bug.cgi?id=375811 The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On Kernel 4.9, the default is to not accept DMA on stack anymore on x86 architecture. On other architectures, this has been a requirement since Kernel 2.2. So, after this patch, this driver should likely work fine on all archs. Tested with USB ID 2040:5510: Hauppauge Windham Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-14packet: fix races in fanout_add()Eric Dumazet
Multiple threads can call fanout_add() at the same time. We need to grab fanout_mutex earlier to avoid races that could lead to one thread freeing po->rollover that was set by another thread. Do the same in fanout_release(), for peace of mind, and to help us finding lockdep issues earlier. Fixes: dc99f600698d ("packet: Add fanout support.") Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14pch_gbe: Omit private ndo_get_stats functionTobias Klauser
pch_gbe_get_stats() just returns dev->stats so we can leave it out altogether and let dev_get_stats() do the job. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: hip04: Omit private ndo_get_stats functionTobias Klauser
hip04_get_stats() just returns dev->stats so we can leave it out altogether and let dev_get_stats() do the job. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net_sched: nla_memdup_cookie() can be staticWei Yongjun
Fixes the following sparse warning: net/sched/act_api.c:532:5: warning: symbol 'nla_memdup_cookie' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ibmvnic: Fix initial MTU settingsThomas Falcon
In the current driver, the MTU is set to the maximum value capable for the backing device. This decision turned out to be a mistake as it led to confusion among users. The expected initial MTU value used for other IBM vNIC capable operating systems is 1500, with the maximum value (9000) reserved for when Jumbo frames are enabled. This patch sets the MTU to the default value for a net device. It also corrects a discrepancy between MTU values received from firmware, which includes the ethernet header length, and net device MTU values. Finally, it removes redundant min/max MTU assignments after device initialization. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: ethernet: ti: cpsw: fix cpsw assignment in resumeIvan Khoronzhuk
There is a copy-paste error, which hides breaking of resume for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev) in suspend, but left it unchanged in resume. Fixes: 606f39939595a4d4540406bfc11f265b2036af6d (ti: cpsw: move platform data and slaves info to cpsw_common) Reported-by: Alexey Starikovskiy <AStarikovskiy@topcon.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: irda: au1k_ir: drop useless includeManuel Lauss
remove useless ioport.h include. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: irda: au1k_ir: remove unused timerManuel Lauss
remove the unused timer. I suppose it was intended as a timeout detector, but never properly implemented. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14bpf: reduce compiler warnings by adding fallthrough commentsAlexander Alemayhu
Fixes the following warnings: kernel/bpf/verifier.c: In function ‘may_access_direct_pkt_data’: kernel/bpf/verifier.c:702:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (t == BPF_WRITE) ^ kernel/bpf/verifier.c:704:2: note: here case BPF_PROG_TYPE_SCHED_CLS: ^~~~ kernel/bpf/verifier.c: In function ‘reg_set_min_max_inv’: kernel/bpf/verifier.c:2057:23: warning: this statement may fall through [-Wimplicit-fallthrough=] true_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2058:2: note: here case BPF_JSGT: ^~~~ kernel/bpf/verifier.c:2068:23: warning: this statement may fall through [-Wimplicit-fallthrough=] true_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2069:2: note: here case BPF_JSGE: ^~~~ kernel/bpf/verifier.c: In function ‘reg_set_min_max’: kernel/bpf/verifier.c:2009:24: warning: this statement may fall through [-Wimplicit-fallthrough=] false_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2010:2: note: here case BPF_JSGT: ^~~~ kernel/bpf/verifier.c:2019:24: warning: this statement may fall through [-Wimplicit-fallthrough=] false_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2020:2: note: here case BPF_JSGE: ^~~~ Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14pcnet32: fix BNC/AUI port on AM79C970AOndrej Zary
Even though the port autoselection is enabled by default on AM79C970A, BNC/AUI port does not work because the link is always reported to be down. The link state reported by the chip belongs only to the TP port but the driver uses it regardless of the port used. The chip can't detect BNC/AUI link state. Disable port autoselection and use TP port by default to keep current behavior (link detection works on TP port, BNC/AUI port does not work). Implement ethtool autoneg, port and duplex configuration to allow using the BNC/AUI port. Report the TP link state only if the TP port is selected. When the port autoselection is enabled or AUI port is selected, report the link as always up. Move pcnet32_suspend() and pcnet32_clr_suspend() functions to avoid forward declarations. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14pcnet32: factor out pcnet32_clr_suspend()Ondrej Zary
Move the code to clear SUSPEND flag to a separate function to simplify code. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14mlxsw: spectrum: Change ipv6 unregistered mc tableNogah Frankel
Point back the unregister IPv6 mc table to the bc table. It is done since IPv6 mcast snooping is not supported for Spectrum yet. Reported-by: Jiri Pirko <jiri@mellanox.com> Fixes: 71c365bdc439 ("mlxsw: spectrum: Separate bc and mc floods") Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Tested-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14kcm: fix a null pointer dereference in kcm_sendmsg()WANG Cong
In commit 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()") I tried to avoid skb allocation for 0-length case, but missed a check for NULL pointer in the non EOR case. Fixes: 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14Merge branch 'sunvnet-driver-updates'David S. Miller
Shannon Nelson says: ==================== sunvnet driver updates The sunvnet ldom virtual network driver was due for some updates and a bugfix or two. These patches address a few items left over from last year's make-over. v2: - changed memory barrier fix to use smp_wmb - put NETIF_F_SG back into the advertised ldmvsw hw_features v3: - the sunvnet_common module doesn't need module_init or _exit v4: - dropped the statistics patch - fixed up "default" tag for SUNVNET_COMMON ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ldmvsw: disable tso and gso for bridge operationsShannon Nelson
The ldmvsw driver is specifically for supporting the ldom virtual networking by running in the primary ldom and using the LDC to connect the remaining ldoms to the outside world via a bridge. With TSO and GSO supported while connected the bridge, things tend to misbehave as seen in our case by delayed packets, enough to begin triggering retransmits and affecting overall throughput. By turning off advertised support for TSO and GSO we restore stable traffic flow through the bridge. Orabug: 23293104 Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ldmvsw: update and simplify version stringShannon Nelson
New version and simplify the print code. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14sunvnet: remove extra rcu_read_unlocksShannon Nelson
The RCU read lock is grabbed first thing in sunvnet_start_xmit_common() so it always needs to be released. This removes the conditional release in the dropped packet error path and removes a couple of superfluous calls in the middle of the code. Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14sunvnet: straighten up message event handling logicShannon Nelson
The use of gotos for handling the incoming events made this code harder to read and support than it should be. This patch straightens out and clears up the logic. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14sunvnet: add memory barrier before check for tx enableShannon Nelson
In order to allow the underlying LDC and outstanding memory operations to potentially catch up with the driver's Tx requests, add a memory barrier before checking again for available tx descriptors. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14sunvnet: update version and version printingShannon Nelson
There have been several changes since the first version of this code, so we bump the version number. While we're at it, we can simplify the version printing a bit and drop a couple lines of code. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14sunvnet: remove unused variable in maybe_tx_wakeupSowmini Varadhan
The vio_dring_state *dr variable is unused in maybe_tx_wakeup(). As the comments indicate, we call maybe_tx_wakeup() whenever we get a STOPPED LDC message on the port. If the queue is stopped, we want to wake it up so that we will send another START message at the next TX and trigger the consumer to drain the dring. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14sunvnet: make sunvnet common code dynamically loadableShannon Nelson
When the sunvnet_common code was split out for use by both sunvnet and the newer ldmvsw, it was made into a static kernel library, which limits the usefulness of sunvnet and ldmvsw as loadables, since most of the real work is being done in the shared code. Also, this is simply dead code in kernels that aren't running the LDoms. This patch makes the sunvnet_common into a dynamically loadable module and makes sunvnet and ldmvsw dependent on sunvnet_common. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ath9k: Access rchan::buf only with per_cpu helperSven Eckelmann
The relayfs was changed to use per CPU constructs to handle the rchan buffers. But the users of the rchan buffers in other parts of the kernel were not modified. This caused crashes like BUG: unable to handle kernel paging request at 00003a5198a0b910 IP: [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610 PGD 0 [ 179.522449] Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc5 #1 [...] Call Trace: <IRQ> [ 179.656426] [<ffffffffa9704373>] ? ath_rx_tasklet+0x2f3/0xd10 [<ffffffffa9702106>] ? ath9k_tasklet+0x1b6/0x230 [<ffffffffa90dcbd1>] ? tasklet_action+0xf1/0x100 [<ffffffffa9a3cb3f>] ? __do_softirq+0xef/0x284 [<ffffffffa90dd22e>] ? irq_exit+0xae/0xb0 [<ffffffffa9a3c89f>] ? do_IRQ+0x4f/0xd0 [<ffffffffa9a3aa42>] ? common_interrupt+0x82/0x82 <EOI> [ 179.703152] [<ffffffffa9a39c1d>] ? poll_idle+0x2d/0x57 [<ffffffffa908c845>] ? sched_clock+0x5/0x10 [<ffffffffa97bc8d6>] ? cpuidle_enter_state+0xf6/0x2d0 [<ffffffffa911988e>] ? cpu_startup_entry+0x14e/0x230 [<ffffffffaa3cdf70>] ? start_kernel+0x461/0x481 [<ffffffffaa3cd120>] ? early_idt_handler_array+0x120/0x120 [<ffffffffaa3cd413>] ? x86_64_start_kernel+0x14c/0x170 Code: 31 db 41 be ff ff ff ff 4c 8b 26 48 8b 6e 08 49 8b 84 24 60 05 00 00 48 8b 00 0f b7 40 04 66 89 44 24 48 eb 11 48 8b 55 40 48 98 <48> 8b 3c c2 e8 ad a0 a4 ff 01 c3 41 8d 56 01 be 00 02 00 00 48 RIP [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610 RSP <ffff9b43e7003d20> CR2: 00003a5198a0b910 Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Cc: Akash Goel <akash.goel@intel.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Reported-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath9k: clean up and fix ath_tx_count_airtimeFelix Fietkau
ath_tx_count_airtime is doing a lot of unnecessary work: - Redundant station lookup - Redundant rcu_read_lock/unlock - Useless memcpy of bf->rates - Useless NULL check of bf->bf_mpdu - Redundant lookup of the skb tid Additionally, it tries to look up the mac80211 queue index from the txq, which fails if the frame was delivered via the power save queue. This patch fixes all of these issues by passing down the right set of pointers instead of doing extra work Cc: stable@vger.kernel.org Fixes: 63fefa050477 ("ath9k: Introduce airtime fairness scheduling between stations") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath6kl: Use net_device_stats from struct net_deviceTobias Klauser
Instead of using a private copy of struct net_device_stats in struct ath6kl_vif, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: fix the garage chars in board file name creationRyan Hsu
The variant[] string will be valid only if the bdf_ext is set. The string memory needs to be null-terminated to avoid the undefined garbage appended by the subsequent board file name creation. ath10k_pci 0000:04:00.0: failed to fetch board data for "bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3363��P�����" from ath10k/QCA6174/hw3.0/board-2.bin Fixes: f2593cb1b291 ("ath10k: Search SMBIOS for OEM board file extension") Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: convert warning about non-existent OTP board id to debug messageKalle Valo
Currently ath10k unncessarily warns about board id not available from OTP: ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.9-2 api 5 features no-p2p,raw-mode crc32 b8d50af5 ath10k_pci 0000:02:00.0: board id is not exist in otp, ignore it ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 But not all boards have the board id in OTP so this is not a problem and no need to confuse the user with that info. So this can be safely changed to a debug message. Also fix grammar in the debug message. Fixes: d2e202c06ca4 ("ath10k: ignore configuring the incorrect board_id") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: silence firmware file probing warningsMichal Kazior
Firmware files are versioned to prevent older driver instances to load unsupported firmware blobs. This is reflected with a fallback logic which attempts to load several firmware files. This however produced a lot of unnecessary warnings sometimes confusing users and leading them to rename firmware files making things even more confusing. Hence use request_firmware_direct() which does not produce extra warnings. This shouldn't really break anything because most modern systems don't rely on udev/hotplug helpers to load firmware files anymore. For example it was confirmed that LEDE does not user helper. This also fixes a 60 second delay per _each_ unexistent firmware/calibration file with distros which have CONFIG_FW_LOADER_USER_HELPER_FALLBACK enabled, RHEL being a notable example. Using ath10k with firmware-2.bin this might end up into a five minute delay in boot. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [kvalo@qca.qualcomm.com: add more info to the commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: add directory to board data error messageKalle Valo
This way user has a better idea what file exactly is missing. This is needed when we switch to using request_firmware_direct() which doesn't print any errors anymore. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: fetch firmware images in a loopErik Stromdahl
To make it easier to handle minimum and maximum firmware API numbers convert the firmware fetch functionality to a loop. If no firmware image is found print an error with minimum and maximum API numbers and the name of firmware directory. This is needed when we switch to using request_firmware_direct() which doesn't print any errors anymore. Also add a new function for creating the fw file name dynamically which makes it easier to add new bus support, for example SDIO and USB, later. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> [kvalo@qca.qualcomm.com: remove sdio/usb part, new error message, clarify commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14Merge branch 'sfc-bogus-interrupt-mode-fallbacks'David S. Miller
Edward Cree says: ==================== sfc: prevent bogus interrupt-mode fallbacks EF10 VFs only support MSI-X interrupts, not MSI or legacy. This series stops the probe logic from trying to fallback to those if MSI-X interrupt probe fails. It also prevents selecting them with the interrupt_mode module parameter. This avoids producing messages like "failed to hook legacy IRQ 0" and "IRQ handler type mismatch for IRQ 0", and ensures that the relevant error (from the attempt to enable MSI-X) is reported to the caller. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14sfc: only fall back to a lower interrupt mode if it is supportedAndrew Rybchenko
If we fail to probe interrupts with our minimum mode, return that error. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14sfc: MSI-X is the only interrupt mode for EF10 VFsAndrew Rybchenko
Add min_interrupt_mode specification per NIC type. It is a bit confusing because of "highest interrupt mode is less capable". Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:21:05 +0000