summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-21arm64: dts: qcom: pm8150b: Add base dts fileVinod Koul
PMIC pm8150b is a slave pmic and this adds base DTS file for pm8150b with power-on, adc, and gpio nodes Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: pm8150: Add base dts fileVinod Koul
Add base DTS file for pm8150 along with GPIOs, power-on, rtc and vadc nodes Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: sm8150: Add base dts fileVinod Koul
This add base DTS file with cpu, psci, firmware, clock node tlmm and spmi and enables boot to console Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: sdm845: add adsp and cdsp fastrpc nodesSrinivas Kandagatla
Add fastrpc compute context bank nodes to both cdsp and adsp. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-19arm64: dts: sdm845: Add dynamic CPU power coefficientsMatthias Kaehlcke
Add dynamic power coefficients for the Silver and Gold CPU cores of the Qualcomm SDM845. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-19arm64: dts: qcom: qcs404: Update memory map to v3Bjorn Andersson
Update the reserved-memory map to version 3, to adjust to changes in the remoteprocs. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-16arm64: dts: qcom: qcs404-evb: Mark WCSS clocks protectedBjorn Andersson
'7d0c76bdf227 ("clk: qcom: Add WCSS gcc clock control for QCS404")' introduces two new clocks to gcc. These are not used before clk_disable_unused() and as such the clock framework tries to disable them. But on the EVB these registers are only accessible through TrustZone, so these clocks must be marked as "protected" to prevent the clock code from touching them. Numerical values are used as the constants are not yet available in a common tree. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reported-by: Mark Brown <broonie@kernel.org> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: Add device tree for Longcheer L8150Stephan Gerhold
Longcheer L8150 is a smartphone based on MSM8916 which is used in several rebrands like the Snapdragon 410 Android One devices or the Wileyfox Swift. Add a device tree for L8150 with initial support for: - SDHCI (internal and external storage) - USB Device Mode - UART - Regulators Co-developed-by: Nikita Travkin <nikitos.tr@gmail.com> Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: Add device tree for Samsung Galaxy A3U/A5UStephan Gerhold
Samsung Galaxy A3 (SM-A300FU) and Samsung Galaxy A5 (SM-A500FU) are smartphones using the MSM8916 SoC released in 2015. Add a device tree for A3U and A5U with initial support for: - SDHCI (internal and external storage) - USB Device Mode - UART (on USB connector via the SM5502 MUIC) - Regulators The two devices (and all other variants of A3/A5 released in 2015) are very similar, with some differences in display, touchscreen and sensors. The common parts are shared in msm8916-samsung-a2015-common.dtsi to reduce duplication. The device tree is loosely based on apq8016-sbc.dtsi and the downstream kernel provided by Samsung, mixed with a lot of own research. Co-developed-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05dt-bindings: qcom: Document bindings for new MSM8916 devicesStephan Gerhold
Document the new samsung,a3u/a5u-eur and longcheer,l8150 device tree bindings used in their device trees. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05dt-bindings: vendor-prefixes: Add Longcheer Technology Co., Ltd.Stephan Gerhold
Add the "longcheer" vendor prefix for Longcheer Technology Co., Ltd., an "industry-leading service provider of mobile phone design and product delivery". (http://www.longcheer.com) Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: msm8996: Add Venus video codec DT nodeStanimir Varbanov
This adds Qualcomm Venus video codec DT node for the video codec hardware found in MSM8996 platforms. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: Extend AOSS QMP nodeThara Gopinath
AOSS hosts resources that can be used to warm up the SoC. Add nodes for these resources. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: msm8996: Add Coresight supportVivek Gautam
Enable coresight support by adding device nodes for the available source, sinks and channel blocks on msm8996. This also adds coresight cpu debug nodes. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: msm8998: Add Coresight supportSai Prakash Ranjan
Enable coresight support by adding device nodes for the available source, sinks and channel blocks on MSM8998. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: sdm845: Add Coresight supportSai Prakash Ranjan
Add coresight components found on Qualcomm SDM845 SoC. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: msm8998: Node ordering, address cleanupsJeffrey Hugo
DT nodes should be ordered by address, then node name, and finally label. The msm8998 dtsi does not follow this, so clean it up by reordering the nodes. While we are at it, extend the addresses to be fully 32-bits wide so that ordering is easy to determine when adding new nodes. Also, two or so nodes had the wrong address value in their node name (did not match the reg property), so fix those up as well. Hopefully going forward, things can be maintained so that a cleanup like this is not needed. Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: sdm845-cheza: Spelling s/conenctors/connectors/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: qcs404: Add wifi rails in QCS404 dt node for proxy votesGovind Singh
Add wifi regulators in qcs404 dt node for proxy vote. Proxy votes are required for handling driver recovery scenarios to prevent un-clocked register access during driver recovery. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: qcs404: remove unit name for thermal trip pointsVinod Koul
The thermal trip points have unit name but no reg property, so we can remove them arch/arm64/boot/dts/qcom/qcs404.dtsi:1080.31-1084.7: Warning (unit_address_vs_reg): /thermal-zones/aoss-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1095.33-1099.7: Warning (unit_address_vs_reg): /thermal-zones/q6-hvx-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1110.32-1114.7: Warning (unit_address_vs_reg): /thermal-zones/lpass-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1125.31-1129.7: Warning (unit_address_vs_reg): /thermal-zones/wlan-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1140.34-1144.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1145.34-1149.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1174.31-1178.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1179.31-1183.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1208.31-1212.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1213.31-1217.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1242.31-1246.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1247.31-1251.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1276.31-1280.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1281.31-1285.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/qcs404.dtsi:1310.30-1314.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal/trips/trip-point@0: node has a unit name, but no reg property Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: pms405: remove reduandant propertiesVinod Koul
pms405@1 nodes specified unnecessary #address-cells/#size-cells but the subnodes dont have "ranges" or "reg" so remove it arch/arm64/boot/dts/qcom/pms405.dtsi:141.21-150.4: Warning (avoid_unnecessary_addr_size): /soc@0/spmi@200f000/pms405@1: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: pms405: add unit name adc nodesVinod Koul
The adc nodes have reg property but were missing the unit name, so add that to fix these warnings: arch/arm64/boot/dts/qcom/pms405.dtsi:91.12-94.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/ref_gnd: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:96.14-99.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vref_1p25: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:101.19-104.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vph_pwr: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:106.13-109.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/die_temp: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:111.27-116.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor1: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:118.27-123.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor3: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/qcom/pms405.dtsi:125.22-130.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/xo_temp: node has a reg or ranges property, but no unit name Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: sdm845: Add device node for Last level cache controllerSai Prakash Ranjan
Last level cache (aka. system cache) controller provides control over the last level cache present on SDM845. This cache lies after the memory noc, right before the DDR. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-05arm64: dts: qcom: msm8996: Rename smmu nodesBjorn Andersson
Node names shouldn't include a vendor prefix and should whenever possible use a generic identifier. Resolve this by renaming the smmu nodes "iommu". Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-25arm64: dts: qcom: sdm845: remove macro from unit nameVinod Koul
Unit name is supposed to be a number, using a macro with hex value is not recommended, so add the value in unit name. arch/arm64/boot/dts/qcom/pm8998.dtsi:81.18-84.6: Warning (unit_address_format): /soc/spmi@c440000/pmic@0/adc@3100/adc-chan@0x06: unit name should not have leading "0x" arch/arm64/boot/dts/qcom/pm8998.dtsi:81.18-84.6: Warning (unit_address_format): /soc/spmi@c440000/pmic@0/adc@3100/adc-chan@0x06: unit name should not have leading 0s Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-25arm64: dts: qcom: sdm845-cheza: remove macro from unit nameVinod Koul
Unit address is supposed to be a number, using a macro with hex value is not recommended, so add the value in unit name. arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:966.16-969.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4d: unit name should not have leading "0x" arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:971.16-974.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4e: unit name should not have leading "0x" arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:976.16-979.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4f: unit name should not have leading "0x" arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:981.16-984.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x50: unit name should not have leading "0x" arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:986.16-989.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x51: unit name should not have leading "0x" Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-25arm64: dts: qcom: sdm845: remove unit name for thermal trip pointsVinod Koul
The thermal trip points have unit name but no reg property, so we can remove them arch/arm64/boot/dts/qcom/sdm845.dtsi:2824.31-2828.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:2830.31-2834.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:2868.31-2872.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:2874.31-2878.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:2912.31-2916.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:2918.31-2922.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:2956.31-2960.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:2962.31-2966.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3000.31-3004.7: Warning (unit_address_vs_reg): /thermal-zones/cpu4-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3006.31-3010.7: Warning (unit_address_vs_reg): /thermal-zones/cpu4-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3044.31-3048.7: Warning (unit_address_vs_reg): /thermal-zones/cpu5-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3050.31-3054.7: Warning (unit_address_vs_reg): /thermal-zones/cpu5-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3088.31-3092.7: Warning (unit_address_vs_reg): /thermal-zones/cpu6-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3094.31-3098.7: Warning (unit_address_vs_reg): /thermal-zones/cpu6-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3132.31-3136.7: Warning (unit_address_vs_reg): /thermal-zones/cpu7-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3138.31-3142.7: Warning (unit_address_vs_reg): /thermal-zones/cpu7-thermal/trips/trip-point@1: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3176.32-3180.7: Warning (unit_address_vs_reg): /thermal-zones/aoss0-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3191.35-3195.7: Warning (unit_address_vs_reg): /thermal-zones/cluster0-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3211.35-3215.7: Warning (unit_address_vs_reg): /thermal-zones/cluster1-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3231.31-3235.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal-top/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3246.31-3250.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal-bottom/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3261.32-3265.7: Warning (unit_address_vs_reg): /thermal-zones/aoss1-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3276.35-3280.7: Warning (unit_address_vs_reg): /thermal-zones/q6-modem-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3291.30-3295.7: Warning (unit_address_vs_reg): /thermal-zones/mem-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3306.31-3310.7: Warning (unit_address_vs_reg): /thermal-zones/wlan-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3321.33-3325.7: Warning (unit_address_vs_reg): /thermal-zones/q6-hvx-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3336.33-3340.7: Warning (unit_address_vs_reg): /thermal-zones/camera-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3351.32-3355.7: Warning (unit_address_vs_reg): /thermal-zones/video-thermal/trips/trip-point@0: node has a unit name, but no reg property arch/arm64/boot/dts/qcom/sdm845.dtsi:3366.32-3370.7: Warning (unit_address_vs_reg): /thermal-zones/modem-thermal/trips/trip-point@0: node has a unit name, but no reg property Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-25arm64: dts: qcom: sdm845: remove unnecessary properties for dsi nodesVinod Koul
We get a warning about unnecessary properties of arch/arm64/boot/dts/qcom/sdm845.dtsi:2211.22-2257.6: Warning (avoid_unnecessary_addr_size): /soc/mdss@ae00000/dsi@ae94000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm64/boot/dts/qcom/sdm845.dtsi:2278.22-2324.6: Warning (avoid_unnecessary_addr_size): /soc/mdss@ae00000/dsi@ae96000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property So, remove these properties Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-25arm64: dts: qcom: sdm845: Add unit name to soc nodeVinod Koul
We get a warning about missing unit name for soc node, so add it. arch/arm64/boot/dts/qcom/sdm845.dtsi:623.11-2814.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-25arm64: dts: sdm845: Add video nodesMalathi Gottam
This adds video nodes to sdm845 based on the examples in the bindings. Tested-by: An\355bal Lim\363n <anibal.limon@linaro.org> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Malathi Gottam <mgottam@codeaurora.org> Co-developed-by: Aniket Masule <amasule@codeaurora.org> Signed-off-by: Aniket Masule <amasule@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-22arm64: dts: qcom: Add Asus NovaGo TP370QLJeffrey Hugo
This adds the initial DT for the Asus NovaGo TP370QL laptop. Supported functionality includes USB (host), microSD-card, keyboard, and trackpad. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-22arm64: dts: qcom: Add HP Envy x2Jeffrey Hugo
This adds the initial DT for the HP Envy x2 laptop. Supported functionality includes USB (host), microSD-card, keyboard, and trackpad. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-22arm64: dts: qcom: Add Lenovo Miix 630Jeffrey Hugo
This adds the initial DT for the Lenovo Miix 630 laptop. Supported functionality includes USB (host), microSD-card, keyboard, and trackpad. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-21Linus 5.3-rc1v5.3-rc1Linus Torvalds
2019-07-21Merge tag 'devicetree-fixes-for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
2019-07-21Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
2019-07-21Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
2019-07-21iommu/amd: fix a crash in iova_magazine_free_pfnsQian Cai
The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-21hexagon: switch to generic version of pte allocationMike Rapoport
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-21Merge tag 'ntb-5.3' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
2019-07-20typo fix: it's d_make_root, not d_make_inode...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-07-20dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examplesRob Herring
Now that examples are validated against the DT schema, an error with required 'clocks' property missing is exposed: Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@40020000: gpio@0: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@1000: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@2000: 'clocks' is a required property Add the missing 'clocks' properties to the examples to fix the errors. Fixes: 2c9239c125f0 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: iio: ad7124: Fix dtc warnings in exampleRob Herring
With the conversion to DT schema, the examples are now compiled with dtc. The ad7124 binding example has the following warning: Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \ Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) There's a default #size-cells and #address-cells values of 1 for examples. For examples needing different values such as this one on a SPI bus, they need to provide a SPI bus parent node. Fixes: 26ae15e62d3c ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: iio: avia-hx711: Fix avdd-supply typo in exampleRob Herring
Now that examples are validated against the DT schema, a typo in avia-hx711 example generates a warning: Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property Fix the typo. Fixes: 5150ec3fe125 ("avia-hx711.yaml: transform DT binding to YAML") Cc: Andreas Klinger <ak@it-klinger.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: pinctrl: aspeed: Fix AST2500 example errorsRob Herring
The schema examples are now validated against the schema itself. The AST2500 pinctrl schema has a couple of errors: Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ pinctrl: aspeed,external-nodes: [[1, 2]] is too short Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errorsRob Herring
The Aspeed pinctl schema have errors in the 'compatible' schema: Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements Flow style sequences have to be quoted if the vales contain ','. Fix this by using the more common one line per entry formatting. Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937bb5c ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodesRob Herring
Matching on the 'cpus' node was a bad choice because the schema is incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus schema which checks the general structure, it is also redundant to do so in the Risc-V CPU schema. The downside is one could conceivably mix different architecture's cpu nodes or have typos in the compatible string. The latter problem pretty much exists for every schema. Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20dt-bindings: Ensure child nodes are of type 'object'Rob Herring
Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: - Apple SPI keyboard and trackpad driver for newer Macs - ALPS driver will ignore trackpoint-only devices to give the trackpoint driver a chance to handle them properly - another Lenovo is switched over to SMbus from PS/2 - assorted driver fixups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - fix a mismatch between a condition check and its comment Input: psmouse - fix build error of multiple definition Input: applespi - remove set but not used variables 'sts' Input: add Apple SPI keyboard and trackpad driver Input: alps - don't handle ALPS cs19 trackpoint-only device Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer Input: adp5589 - initialize GPIO controller parent device Input: iforce - remove empty multiline comments Input: synaptics - fix misuse of strlcpy Input: auo-pixcir-ts - switch to using devm_add_action_or_reset() Input: gtco - bounds check collection indent level Input: mtk-pmic-keys - add of_node_put() before return Input: sun4i-lradc-keys - add of_node_put() before return Input: synaptics - whitelist Lenovo T580 SMBus intertouch
2019-07-20Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions: - force unencrypted dma-coherent buffers if encryption bit can't fit into the dma coherent mask (Tom Lendacky) - avoid limiting request size if swiotlb is not used (me) - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang Duan)" * tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma-direct: only limit the mapping size if swiotlb could be used dma-mapping: add a dma_addressing_limited helper dma-direct: Force unencrypted DMA under SME for certain DMA masks
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:25:37 +0000