summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-16drm/amdgpu: fix null pointer deref in firmware header printingXiaojie Yuan
v2: declare as (struct common_firmware_header *) type because struct xxx_firmware_header inherits from it When CE's ucode_id(8) is used to get sdma_hdr, we will be accessing an unallocated amdgpu_firmware_info instance. This issue appears on rhel7.7 with gcc 4.8.5. Newer compilers might have optimized out such 'defined but not referenced' variable. [ 1120.798564] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a [ 1120.806703] IP: [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1120.813693] PGD 80000002603ff067 PUD 271b8d067 PMD 0 [ 1120.818931] Oops: 0000 [#1] SMP [ 1120.822245] Modules linked in: amdgpu(OE+) amdkcl(OE) amd_iommu_v2 amdttm(OE) amd_sched(OE) xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun bridge stp llc devlink ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat iptable_mangle iptable_security iptable_raw nf_conntrack libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dm_mirror dm_region_hash dm_log dm_mod intel_pmc_core intel_powerclamp coretemp intel_rapl joydev kvm_intel eeepc_wmi asus_wmi kvm sparse_keymap iTCO_wdt irqbypass rfkill crc32_pclmul snd_hda_codec_realtek mxm_wmi ghash_clmulni_intel intel_wmi_thunderbolt iTCO_vendor_support snd_hda_codec_generic snd_hda_codec_hdmi aesni_intel lrw gf128mul glue_helper ablk_helper sg cryptd pcspkr snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd pinctrl_sunrisepoint pinctrl_intel soundcore acpi_pad mei_me wmi mei i2c_i801 pcc_cpufreq ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic i915 i2c_algo_bit iosf_mbi drm_kms_helper e1000e syscopyarea sysfillrect sysimgblt fb_sys_fops ahci libahci drm ptp libata crct10dif_pclmul crct10dif_common crc32c_intel serio_raw pps_core drm_panel_orientation_quirks video i2c_hid [ 1120.954136] CPU: 4 PID: 2426 Comm: modprobe Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1 [ 1120.964390] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 1302 11/09/2015 [ 1120.973321] task: ffff991ef1e3c1c0 ti: ffff991ee625c000 task.ti: ffff991ee625c000 [ 1120.981020] RIP: 0010:[<ffffffffc0e3c9b3>] [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1120.990483] RSP: 0018:ffff991ee625f950 EFLAGS: 00010202 [ 1120.995935] RAX: 0000000000000002 RBX: ffff991edf6b2d38 RCX: ffff991edf6a0000 [ 1121.003391] RDX: 0000000000000000 RSI: ffff991f01d13898 RDI: ffffffffc110afb3 [ 1121.010706] RBP: ffff991ee625f9b0 R08: 0000000000000000 R09: 0000000000000000 [ 1121.018029] R10: 00000000000004c4 R11: ffff991ee625f64e R12: ffff991edf6b3220 [ 1121.025353] R13: ffff991edf6a0000 R14: 0000000000000008 R15: ffff991edf6b2d30 [ 1121.032666] FS: 00007f97b0c0b740(0000) GS:ffff991f01d00000(0000) knlGS:0000000000000000 [ 1121.041000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1121.046880] CR2: 000000000000000a CR3: 000000025e604000 CR4: 00000000003607e0 [ 1121.054239] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1121.061631] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1121.068938] Call Trace: [ 1121.071494] [<ffffffffc0e3dba8>] psp_hw_init+0x218/0x270 [amdgpu] [ 1121.077886] [<ffffffffc0da3188>] amdgpu_device_fw_loading+0xe8/0x160 [amdgpu] [ 1121.085296] [<ffffffffc0e3b34c>] ? vega10_ih_irq_init+0x4bc/0x730 [amdgpu] [ 1121.092534] [<ffffffffc0da5c75>] amdgpu_device_init+0x1495/0x1c90 [amdgpu] [ 1121.099675] [<ffffffffc0da9cab>] amdgpu_driver_load_kms+0x8b/0x2f0 [amdgpu] [ 1121.106888] [<ffffffffc01b25cf>] drm_dev_register+0x12f/0x1d0 [drm] [ 1121.113419] [<ffffffffa4dcdfd8>] ? pci_enable_device_flags+0xe8/0x140 [ 1121.120183] [<ffffffffc0da260a>] amdgpu_pci_probe+0xca/0x170 [amdgpu] [ 1121.126919] [<ffffffffa4dcf97a>] local_pci_probe+0x4a/0xb0 [ 1121.132622] [<ffffffffa4dd10c9>] pci_device_probe+0x109/0x160 [ 1121.138607] [<ffffffffa4eb4205>] driver_probe_device+0xc5/0x3e0 [ 1121.144766] [<ffffffffa4eb4603>] __driver_attach+0x93/0xa0 [ 1121.150507] [<ffffffffa4eb4570>] ? __device_attach+0x50/0x50 [ 1121.156422] [<ffffffffa4eb1da5>] bus_for_each_dev+0x75/0xc0 [ 1121.162213] [<ffffffffa4eb3b7e>] driver_attach+0x1e/0x20 [ 1121.167771] [<ffffffffa4eb3620>] bus_add_driver+0x200/0x2d0 [ 1121.173590] [<ffffffffa4eb4c94>] driver_register+0x64/0xf0 [ 1121.179345] [<ffffffffa4dd0905>] __pci_register_driver+0xa5/0xc0 [ 1121.185593] [<ffffffffc099f000>] ? 0xffffffffc099efff [ 1121.190914] [<ffffffffc099f0a4>] amdgpu_init+0xa4/0xb0 [amdgpu] [ 1121.197101] [<ffffffffa4a0210a>] do_one_initcall+0xba/0x240 [ 1121.202901] [<ffffffffa4b1c90a>] load_module+0x271a/0x2bb0 [ 1121.208598] [<ffffffffa4dad740>] ? ddebug_proc_write+0x100/0x100 [ 1121.214894] [<ffffffffa4b1ce8f>] SyS_init_module+0xef/0x140 [ 1121.220698] [<ffffffffa518bede>] system_call_fastpath+0x25/0x2a [ 1121.226870] Code: b4 01 60 a2 00 00 31 c0 e8 83 60 33 e4 41 8b 47 08 48 8b 4d d0 48 c7 c7 b3 af 10 c1 48 69 c0 68 07 00 00 48 8b 84 01 60 a2 00 00 <48> 8b 70 08 31 c0 48 89 75 c8 e8 56 60 33 e4 48 8b 4d d0 48 c7 [ 1121.247422] RIP [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1121.254432] RSP <ffff991ee625f950> [ 1121.258017] CR2: 000000000000000a [ 1121.261427] ---[ end trace e98b35387ede75bd ]--- Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Fixes: c5fb912653dae3f878 ("drm/amdgpu: add firmware header printing for psp fw loading (v2)") Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: enable renoir while device probesHuang Rui
This patch is to add asic flag to enable device probe during kfd init. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: disable gfxoff while use no H/W scheduling policyHuang Rui
While gfxoff is enabled, the mmVM_XXX registers will be 0xfffffff while the GFX is in "off" state. KFD queue creattion doesn't use ring based method, so it will trigger a VM fault. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: add renoir kfd topologyHuang Rui
This patch adds renoir kfd topology which is the same with Raven. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: add package manager for renoirHuang Rui
Renoir use GFX v9, so adds v9 package manager. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: init kernel queue for renoirHuang Rui
Renoir is GFX v9, so init v9 kernel queue. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: init kfd apertures v9 for renoirHuang Rui
Renoir is GMC v9, so init v9 kfd apertures. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: add renoir type for the workaround of iommu v2 (v2)Huang Rui
Renoir is the same with Raven, will enable iommu event in future. v2: fix the checking (Thong) Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: enable kfd device queue manager v9 for renoirHuang Rui
Renoir is GFX9, so enable v9 devcie queue manager. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: add renoir kfd device info (v2)Huang Rui
This patch inits renoir kfd device info, so we treat renoir as "dgpu" (bypass iommu v2). Will enable needs_iommu_device till renoir iommu is ready. v2: rebase and align the drm-next Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: add renoir cache info for CRAT (v2)Huang Rui
Renoir's cache info should be the same with raven and carrizo's. v2: fix missed "break" Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdkfd: Support Navi14 in KFDYong Zhao
Initial support of Navi14 in KFD. The device IDs will be added later. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: Disable retry faults in VMID0Felix Kuehling
There is no point retrying page faults in VMID0. Those faults are always fatal. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu: Add a kernel parameter for specifying the asic typeYong Zhao
As more and more new asics start to reuse the old device IDs before launch, there is a need to quickly override the existing asic type corresponding to the reused device ID through a kernel parameter. With this, engineers no longer need to rely on local hack patches, facilitating cooperation across teams. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-16drm/amdgpu/irq: check if nbio funcs existAlex Deucher
We need to check if the nbios funcs exist before checking the individual pointers. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
2019-09-13drm/amd/display: replace FIXME with TODOQingqing Zhuo
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: verify stream link before link testJing Zhou
[Why] DP1.2 LL CTS test failure. [How] The failure is caused by not verify stream link is equal to link, only check stream and link is not null. Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: dce11.x /dce12 update formula inputCharlene Liu
[Description] 1. OUTSTANDING_REQUEST_LIMIT update from 0xFF to 0x1F (HW doc update) 2. using memory type to convert UMC's MCLK to Yclk. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Isolate DSC module from driver dependenciesBayan Zabihiyan
[Why] Edid Utility wishes to include DSC module from driver instead of doing it's own logic which will need to be updated every time someone modifies the driver logic. [How] Modify some functions such that we dont need to pass the entire DC structure as parameter. -Remove DC inclusion from module. -Filter out problematic types and inclusions Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: OTC underflow fixJaehyun Chung
[Why] Underflow occurs on some display setups(repro'd on 3x4K HDR) on boot, mode set, and hot-plugs with. Underflow occurs because mem clk is not set high after disabling pstate switching. This behaviour occurs because some calculations assumed displays were synchronized. [How] Add a condition to check if timing sync is disabled so that synchronized vblank can be set to false. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: remove hw access from dc_destroyJun Lei
[why] dc_destroy should only clean up SW, this is because GPUs may be removed before driver unload, leading to HW to be unavailable. [how] remove GPIO close as part of GPIO destroy, this is unnecessary because GPIO is not shared, and GPIOs are generally closed after being opened Add tracking to HW access during destructor to make future issues easier to pinpoint, and block access to prevent hangs. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Reuse dcn2 registersVitaly Prosyak
[Why & How] Use dcn2 blender, shaper, 3dlut registers Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: remove temporary transition codeDmytro Laktyushkin
Remove code used to allow compilation error free interface change. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: update navi to use new surface programming behaviourDmytro Laktyushkin
New behaviour will track global updates and update any hw that isn't related to current stream being updated. This should fix any issues caused by pipe split pipes being taken by other streams. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Add missing surface address registersIlya Bakoulin
[Why] - Need to add missing surface address register definitions. - RGBE+A does not work in a stereo configuration because surface addresses are no programmed correctly. [How] Added the register definitions and surface address programming. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: 3.2.49Anthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: config to override DSC start slice heightNikola Cornij
[why] It's sometimes useful to have this option when debugging [how] Add a config flag. If the flag is not set, use driver default policy. If the flag is set, use the value from the flag as the starting DSC slice height. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Add back support for DSC 4:2:2 SimpleNikola Cornij
[why] The requirement has been clarified and only DSC 4:2:2 Native has to be disabled. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Don't allocate payloads if link lostAlvin Lee
We should not allocate payloads if the link is lost until the link is retrained. Some displays require this. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Subsample mode suboptimal for YCbCr4:2:2Krunoslav Kovac
[Why&How] Driver defaults to 1-tap subsample mode for 4:2:2. DCE11.2 added 3-tap. The policy is: DCE8-DCE11 - change to 2-tap, it's better than 1-tap. DCE11.2+ - use 3-tap Note that 4:2:0 was added in DCE11.2 and already uses 3-tap always. Note 2 is that DCE not covered on Linux, only DCN+ Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: refine i2c over auxLewis Huang
[Why] When user mode use i2c over aux through ADL or DDI, the function dal_ddc_service_query_ddc_data will be called. There are two issues. 1. When read/write length > 16byte, current always return false because the DEFAULT_AUX_MAX_DATA_SIZE != length. 2. When usermode only need to read data through i2c, driver will write mot = true at the same address and cause i2c sink confused. Therefore the following read command will get garbage. [How] 1. Add function dal_dcc_submit_aux_command to handle length > 16 byte. 2. Check read size and write size when query ddc data. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Fix DML testsIlya Bakoulin
[Why] DML diags tests are failing because the struct contents get clobbered by a memcpy. [How] Remove the memcpy call. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdkfd: Fix a building error when KFD_SUPPORT_IOMMU_V2 is turned offYong Zhao
The issue was accidentally introduced recently. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: move the call of ras recovery_init and bad page reserve to ↵Tao Zhou
proper place ras recovery_init should be called after ttm init, bad page reserve should be put in front of gpu reset since i2c may be unstable during gpu reset. add cleanup for recovery_init and recovery_fini v2: add more comment and print. remove cancel_work_sync in recovery_init. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: save umc error recordsTao Zhou
save umc error records to ras bad page array v2: add bad pages before gpu reset v3: add NULL check for adev->umc.funcs Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Hook EEPROM table to RASTao Zhou
support eeprom records load and save for ras, move EEPROM records storing to bad page reserving v2: remove redundant check for con->eh_data Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: change ras bps type to eeprom table record structureTao Zhou
change bps type from retired page to eeprom table record, prepare for saving umc error records to eeprom Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/madgpu: Fix EEPROM Checksum calculation.Andrey Grodzovsky
Fix typo which messed up the calculation. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Remove clock gating restore.Andrey Grodzovsky
Restoring clock gating break SMU opeartion afterwards, avoid this until this further invistigated with SMU. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Add smu lock around in pp_smu_i2c_bus_accessAndrey Grodzovsky
Protect from concurrent SMU accesses. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Add stereo mux and dig programming calls for dcn21Roman Li
[Why] The earlier patch "Hook up calls to do stereo mux and dig programming..." doesn't include update for dcn21. [How] Align dcn21 gpio settings with updated stereo control interface. Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdkfd: Query kfd device info by CHIP id instead of pci device idYong Zhao
This optimizes out the pci device id usage in KFD and makes the code more maintainable. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Disable page faults while reading user wptrsFelix Kuehling
These wptrs must be pinned and GPU accessible when this is called from hqd_load functions. So they should never fault. This resolves a circular lock dependency issue involving four locks including the DQM lock and mmap_sem. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: disable stutter mode for renoirAaron Liu
With stutter mode enabled, NMI prints frequently. Disable stutter for the moment because NMI warning storm, and will enable it back till the issue is addressed Signed-off-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: update renoir_ip_offset.hAaron Liu
This patch updates MP1_BASE in renoir_ip_offset.h Signed-off-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/powerplay: implement sysfs for getting dpm clockPrike Liang
With the common interface print_clk_levels can get the following dpm clock: -pp_dpm_dcefclk -pp_dpm_fclk -pp_dpm_mclk -pp_dpm_sclk -pp_dpm_socclk Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: clean up load TMR sequenceJohn Clements
Removed redundant goto statement Signed-off-by: John Clements <john.clements@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: enable TA load support in ArcturusJohn Clements
Add support for loading XGMI/RAS FW Signed-off-by: John Clements <john.clements@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: change r type to int in gmc_v9_0_late_initTao Zhou
change r type from bool to int, suitable for both bool and int return value Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/powerplay: replace smu->table_count with SMU_TABLE_COUNT in smu (v2)Kevin Wang
fix bellow patch issue: drm/amd/powerplay: introduce smu table id type to handle the smu table for each asic ---- "This patch introduces new smu table type, it's to handle the different smu table defines for each asic with the same smu ip." before: use smu->table_count to represent the actual table count in smc firmware use actual table count to check smu function parameter about smu table after: use logic table count "SMU_TABLE_COUNT" to check function parameter because table id already mapped in smu driver, and smu function will use logic table id not actual table id to check func parameter. v2: squash in warning fix Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 23:00:44 +0000