| Age | Commit message (Collapse) | Author |
|---|
|
The gxp_i2c_slave_irq_handler() is hidden in an #ifdef, but the
caller uses an IS_ENABLED() check:
drivers/i2c/busses/i2c-gxp.c: In function 'gxp_i2c_irq_handler':
drivers/i2c/busses/i2c-gxp.c:467:29: error: implicit declaration of function 'gxp_i2c_slave_irq_handler'; did you mean 'gxp_i2c_irq_handler'? [-Werror=implicit-function-declaration]
It has to consistently use one method or the other to avoid warnings,
so move to IS_ENABLED() here for readability and build coverage, and
move the #ifdef in linux/i2c.h to allow building it as dead code.
Fixes: 4a55ed6f89f5 ("i2c: Add GXP SoC I2C Controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
This is unsafe, as the runtime PM callbacks are called from the PM
workqueue, so this may deadlock when handling an i2c attached clock,
which may already hold the clk_prepare mutex from another context.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Using standard mode, rare false ACK responses were appearing with
i2cdetect tool. This was happening due to NACK interrupt triggering
ISR thread before register access interrupt was ready. Removing the
NACK interrupt's ability to trigger ISR thread lets register access
ready interrupt do this instead.
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support")
Signed-off-by: Reid Tonking <reidt@ti.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Pages that are from the same folio do not necessarily need to be
consecutive. In that case, we cannot consolidate them into a single bvec
entry. Before applying the huge page optimization from commit 57bebf807e2a
("io_uring/rsrc: optimise registered huge pages"), check that the memory
is actually consecutive.
Cc: stable@vger.kernel.org
Fixes: 57bebf807e2a ("io_uring/rsrc: optimise registered huge pages")
Signed-off-by: Tobias Holl <tobias@tholl.xyz>
[axboe: formatting]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge hibernation test mode fix for 6.4-rc1.
* pm-sleep:
PM: hibernate: Do not get block device exclusively in test_resume mode
PM: hibernate: Turn snapshot_test into global variable
|
|
The test case probe libc's inet_pton & backtrace it with ping fails with
Fedora 38 on x86_64.
Function getaddrinfo() does not show up in the call chain anymore:
# ./perf script
ping 1803 [000] 728.567146: probe_libc:inet_pton: (7f5275afc840)
133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6)
27c0b __libc_start_main@@GLIBC_2.34+0x8b (/usr/lib64/libc.so.6)
ping 1803 [000] 728.567184: probe_libc:inet_pton: (7f5275afc840)
133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
493e main+0xcde (/usr/bin/ping)
27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6)
#
which causes the test case to fail. Remove function getaddrinfo()
from list of expected functions.
Output before:
# ./perf test 'libc'
91: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Output after:
# ./perf test 'libc'
91: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230503081255.3372986-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With Fedora 38 the perf test 86 probe libc's inet_pton fails on s390.
The call chain of the ping command changed. The functions
text_to_binary_address() and gaih_inet() do not show up in the call
chain anymore.
Output before:
# ./perf test -v 86
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 541050
fgrep: warning: fgrep is obsolescent; using grep -F
fgrep: warning: fgrep is obsolescent; using grep -F
BFD: DWARF error: could not find variable specification at offset 0x22011
...
ping 541078 [002] 348826.679581: probe_libc:inet_pton_1: (3ffad84b940)
14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
10e9c3 __GI_getaddrinfo+0xeb3 (inlined)
4397 main+0x737 (/usr/bin/ping)
FAIL: expected backtrace entry "gaih_inet.*\+0x[[:xdigit:]]\
+[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$"
got "4397 main+0x737 (/usr/bin/ping)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
#
Output after:
# ./perf test -v 86
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 541098
fgrep: warning: fgrep is obsolescent; using grep -F
fgrep: warning: fgrep is obsolescent; using grep -F
BFD: DWARF error: could not find variable specification at offset 0x309d1
...
ping 541126 [006] 349309.099067: probe_libc:inet_pton_1: (3ffb7f4b940)
14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
10e9c3 __GI_getaddrinfo+0xeb3 (inlined)
4397 main+0x737 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230503081134.3372415-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merge an ACPI power management quirk and a change related to the
handling of ACPI device properties for 6.4-rc1:
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede).
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin).
* acpi-pm:
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
* acpi-properties:
ACPI: property: Support strings in Apple _DSM props
|
|
Merge additional thermal core and ACPI thermal changes for 6.4-rc1:
- Clean up the step-wise thermal governor (Zhang Rui).
- Introduce thermal_zone_device() for accessing the device field of
struct thermal_zone_device and two drivers use it (Daniel Lezcano).
- Clean up the ACPI thermal driver a bit (Daniel Lezcano).
- Delete the thermal driver for Intel Menlow platforms that is not
expected to have any users (Rafael Wysocki).
* thermal-core:
thermal: intel: menlow: Get rid of this driver
ACPI: thermal: Move to dedicated function sysfs extra attr creation
ACPI: thermal: Use thermal_zone_device()
thermal: intel: pch_thermal: Use thermal driver device to write a trace
thermal: core: Encapsulate tz->device field
thermal: gov_step_wise: Adjust code logic to match comment
thermal: gov_step_wise: Delete obsolete comment
|
|
"ct untracked" no longer works properly due to erroneous NFT_BREAK.
We have to check ctinfo enum first.
Fixes: d9e789147605 ("netfilter: nf_tables: avoid retpoline overhead for some ct expression calls")
Reported-by: Rvfg <i@rvf6.com>
Link: https://marc.info/?l=netfilter&m=168294996212038&w=2
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzkaller reported a warning below [0].
We can reproduce it by sending 0-byte data from the (AF_PACKET,
SOCK_PACKET) socket via some devices whose dev->hard_header_len
is 0.
struct sockaddr_pkt addr = {
.spkt_family = AF_PACKET,
.spkt_device = "tun0",
};
int fd;
fd = socket(AF_PACKET, SOCK_PACKET, 0);
sendto(fd, NULL, 0, 0, (struct sockaddr *)&addr, sizeof(addr));
We have a similar fix for the (AF_PACKET, SOCK_RAW) socket as
commit dc633700f00f ("net/af_packet: check len when min_header_len
equals to 0").
Let's add the same test for the SOCK_PACKET socket.
[0]:
skb_assert_len
WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 skb_assert_len include/linux/skbuff.h:2552 [inline]
WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 __dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159
Modules linked in:
CPU: 1 PID: 19945 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_assert_len include/linux/skbuff.h:2552 [inline]
RIP: 0010:__dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159
Code: 89 de e8 1d a2 85 fd 84 db 75 21 e8 64 a9 85 fd 48 c7 c6 80 2a 1f 86 48 c7 c7 c0 06 1f 86 c6 05 23 cf 27 04 01 e8 fa ee 56 fd <0f> 0b e8 43 a9 85 fd 0f b6 1d 0f cf 27 04 31 ff 89 de e8 e3 a1 85
RSP: 0018:ffff8880217af6e0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90001133000
RDX: 0000000000040000 RSI: ffffffff81186922 RDI: 0000000000000001
RBP: ffff8880217af8b0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff888030045640
R13: ffff8880300456b0 R14: ffff888030045650 R15: ffff888030045718
FS: 00007fc5864da640(0000) GS:ffff88806cd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020005740 CR3: 000000003f856003 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
dev_queue_xmit include/linux/netdevice.h:3085 [inline]
packet_sendmsg_spkt+0xc4b/0x1230 net/packet/af_packet.c:2066
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0x1b4/0x200 net/socket.c:747
____sys_sendmsg+0x331/0x970 net/socket.c:2503
___sys_sendmsg+0x11d/0x1c0 net/socket.c:2557
__sys_sendmmsg+0x18c/0x430 net/socket.c:2643
__do_sys_sendmmsg net/socket.c:2672 [inline]
__se_sys_sendmmsg net/socket.c:2669 [inline]
__x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fc58791de5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007fc5864d9cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007fc58791de5d
RDX: 0000000000000001 RSI: 0000000020005740 RDI: 0000000000000004
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fc58797e530 R15: 0000000000000000
</TASK>
---[ end trace 0000000000000000 ]---
skb len=0 headroom=16 headlen=0 tailroom=304
mac=(16,0) net=(16,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0
dev name=sit0 feat=0x00000006401d7869
sk family=17 type=10 proto=0
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
igc_configure_rx_ring() function will be called as part of XDP program
setup. If Rx hardware timestamp is enabled prio to XDP program setup,
this timestamp enablement will be overwritten when buffer size is
written into SRRCTL register.
Thus, this commit read the register value before write to SRRCTL
register. This commit is tested by using xdp_hw_metadata bpf selftest
tool. The tool enables Rx hardware timestamp and then attach XDP program
to igc driver. It will display hardware timestamp of UDP packet with
port number 9092. Below are detail of test steps and results.
Command on DUT:
sudo ./xdp_hw_metadata <interface name>
Command on Link Partner:
echo -n skb | nc -u -q1 <destination IPv4 addr> 9092
Result before this patch:
skb hwtstamp is not found!
Result after this patch:
found skb hwtstamp = 1677800973.642836757
Optionally, read PHC to confirm the values obtained are almost the same:
Command:
sudo ./testptp -d /dev/ptp0 -g
Result:
clock time: 1677800973.913598978 or Fri Mar 3 07:49:33 2023
Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add selecting of AUXILIARY_BUS and NET_DEVLINK to the pds_core
Kconfig.
Link: https://lore.kernel.org/netdev/ZE%2FduNH3lBLreNkJ@corigine.com/
Fixes: ddbcb22055d1 ("pds_core: Kconfig and pds_core.rst")
Suggested-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This cruft from previous drafts should have been removed when
the code was updated to not use the old style dummy helpers.
Fixes: 55435ea7729a ("pds_core: initial framework for pds_core PF driver")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a check for NULL on the alloc return. If devlink_alloc() fails and
we try to use devlink_priv() on the NULL return, the kernel gets very
unhappy and panics. With this fix, the driver load will still fail,
but at least it won't panic the kernel.
Fixes: df69ba43217d ("ionic: Add basic framework for IONIC Network device driver")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not possible to set the number of lanes when setting link modes
using the legacy IOCTL ethtool interface. Since 'struct
ethtool_link_ksettings' is not initialized in this path, drivers receive
an uninitialized number of lanes in 'struct
ethtool_link_ksettings::lanes'.
When this information is later queried from drivers, it results in the
ethtool code making decisions based on uninitialized memory, leading to
the following KMSAN splat [1]. In practice, this most likely only
happens with the tun driver that simply returns whatever it got in the
set operation.
As far as I can tell, this uninitialized memory is not leaked to user
space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in
linkmodes_prepare_data().
Fix by initializing the structure in the IOCTL path. Did not find any
more call sites that pass an uninitialized structure when calling
'ethtool_ops::set_link_ksettings()'.
[1]
BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline]
BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333
ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline]
ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333
ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmsg net/socket.c:2584 [inline]
__do_sys_sendmsg net/socket.c:2593 [inline]
__se_sys_sendmsg net/socket.c:2591 [inline]
__x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was stored to memory at:
tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544
__ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441
ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327
ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmsg net/socket.c:2584 [inline]
__do_sys_sendmsg net/socket.c:2593 [inline]
__se_sys_sendmsg net/socket.c:2591 [inline]
__x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was stored to memory at:
tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553
ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609
__dev_ethtool net/ethtool/ioctl.c:3024 [inline]
dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078
dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524
sock_do_ioctl+0x295/0x540 net/socket.c:1213
sock_ioctl+0x729/0xd90 net/socket.c:1316
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0x222/0x400 fs/ioctl.c:856
__x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Local variable link_ksettings created at:
ethtool_set_link_ksettings+0x54/0x690 net/ethtool/ioctl.c:577
__dev_ethtool net/ethtool/ioctl.c:3024 [inline]
dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078
Fixes: 012ce4dd3102 ("ethtool: Extend link modes settings uAPI with lanes")
Reported-and-tested-by: syzbot+ef6edd9f1baaa54d6235@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/0000000000004bb41105fa70f361@google.com/
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set supports_autosuspend = 1 for the rtl8152_cfgselector_driver.
Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It seems that ethtool is calling into .get_rxnfc more often with
ETHTOOL_GRXCLSRLCNT which ionic doesn't know about. We don't
need to log a message about it, just return not supported.
Fixes: aa3198819bea6 ("ionic: Add RSS support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sai Krishna says:
====================
octeontx2: Miscellaneous fixes
This patchset includes following fixes.
Patch #1 Fix for the race condition while updating APR table
Patch #2 Fix end bit position in NPC scan config
Patch #3 Fix depth of CAM, MEM table entries
Patch #4 Fix in increase the size of DMAC filter flows
Patch #5 Fix driver crash resulting from invalid interface type
information retrieved from firmware
Patch #6 Fix incorrect mask used while installing filters involving
fragmented packets
Patch #7 Fixes for NPC field hash extract w.r.t IPV6 hash reduction,
IPV6 filed hash configuration.
Patch #8 Fix for NPC hardware parser configuration destination
address hash, IPV6 endianness issues.
Patch #9 Fix for skipping mbox initialization for PFs disabled by firmware.
Patch #10 Fix disabling packet I/O in case of mailbox timeout.
Patch #11 Fix detaching LF resources in case of VF probe fail.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a VF device probe fails due to error in MSIX vector allocation then
the resources NIX and NPA LFs were not detached. Fix this by detaching
the LFs when MSIX vector allocation fails.
Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At the stage of enabling packet I/O in otx2_open, If mailbox
timeout occurs then interface ends up in down state where as
hardware packet I/O is enabled. Hence disable packet I/O also
before bailing out.
Fixes: 1ea0166da050 ("octeontx2-pf: Fix the device state on error")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Firmware enables PFs and allocate mbox resources for each of the PFs.
Currently PF driver configures mbox resources without checking whether
PF is enabled or not. This results in crash. This patch fixes this issue
by skipping disabled PF's mbox initialization.
Fixes: 9bdc47a6e328 ("octeontx2-af: Mbox communication support btw AF and it's VFs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1. Allow field hash configuration for both source and destination IPv6.
2. Configure hardware parser based on hash extract feature enable flag
for IPv6.
3. Fix IPv6 endianness issue while updating the source/destination IP
address via ntuple rule.
Fixes: 56d9f5fd2246 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1. As per previous implementation, mask and control parameter to
generate the field hash value was not passed to the caller program.
Updated the secret key mbox to share that information as well,
as a part of the fix.
2. Earlier implementation did not consider hash reduction of both
source and destination IPv6 addresses. Only source IPv6 address
was considered. This fix solves that and provides option to hash
Fixes: 56d9f5fd2246 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During the initial design, the IPv4 ip_flag mask was set to 0xff.
Which results to filter only fragmets with (fragment_offset == 0).
As part of the fix, updated the mask to 0x20 to filter all the
fragmented packets irrespective of the fragment_offset value.
Fixes: c672e3727989 ("octeontx2-pf: Add support to filter packet based on IP fragment")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Upon physical link change, firmware reports to the kernel about the
change along with the details like speed, lmac_type_id, etc.
Kernel derives lmac_type based on lmac_type_id received from firmware.
In a few scenarios, firmware returns an invalid lmac_type_id, which
is resulting in below kernel panic. This patch adds the missing
validation of the lmac_type_id field.
Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 35.321595] Modules linked in:
[ 35.328982] CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted
5.4.210-g2e3169d8e1bc-dirty #17
[ 35.337014] Hardware name: Marvell CN103XX board (DT)
[ 35.344297] Workqueue: events work_for_cpu_fn
[ 35.352730] pstate: 40400089 (nZcv daIf +PAN -UAO)
[ 35.360267] pc : strncpy+0x10/0x30
[ 35.366595] lr : cgx_link_change_handler+0x90/0x180
Fixes: 61071a871ea6 ("octeontx2-af: Forward CGX link notifications to PFs")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CN10kb supports large number of dmac filter flows to be
inserted. Increase the field size to accommodate the same
Fixes: b747923afff8 ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In current driver, NPC cam and mem table sizes are read from wrong
register offset. This patch fixes the register offset so that correct
values are populated on read.
Fixes: b747923afff8 ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the current driver, NPC exact match feature was not getting
enabled as configured bit was not read properly.
for_each_set_bit_from() need end bit as one bit post
position in the bit map to read NPC exact nibble enable
bits properly. This patch fixes the same.
Fixes: b747923afff8 ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
APR table contains the lmtst base address of PF/VFs. These entries
are updated by the PF/VF during the device probe. The lmtst address
is fetched from HW using "TXN_REQ" and "ADDR_RSP_STS" registers.
The lock tries to protect these registers from getting overwritten
when multiple PFs invokes rvu_get_lmtaddr() simultaneously.
For example, if PF1 submit the request and got permitted before it
reads the response and PF2 got scheduled submit the request then the
response of PF1 is overwritten by the PF2 response.
Fixes: 893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neir Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Hit ENOENT when trying to update an unexisting base chain.
2) Fix libmnl pkg-config usage in selftests, from Jeremy Sowden.
3) KASAN reports use-after-free when deleting a set element for an
anonymous set that was already removed in the same transaction,
reported by P. Sondej and P. Krysiuk.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Toggle deleted anonymous sets as inactive in the next generation, so
users cannot perform any update on it. Clear the generation bitmask
in case the transaction is aborted.
The following KASAN splat shows a set element deletion for a bound
anonymous set that has been already removed in the same transaction.
[ 64.921510] ==================================================================
[ 64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.924745] Write of size 8 at addr dead000000000122 by task test/890
[ 64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253
[ 64.931120] Call Trace:
[ 64.932699] <TASK>
[ 64.934292] dump_stack_lvl+0x33/0x50
[ 64.935908] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.937551] kasan_report+0xda/0x120
[ 64.939186] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.940814] nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.942452] ? __kasan_slab_alloc+0x2d/0x60
[ 64.944070] ? nf_tables_setelem_notify+0x190/0x190 [nf_tables]
[ 64.945710] ? kasan_set_track+0x21/0x30
[ 64.947323] nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink]
[ 64.948898] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
1. Don't hard-code pkg-config
2. Remove distro-specific default for CFLAGS
3. Use pkg-config for LDLIBS
Fixes: a50a88f026fb ("selftests: netfilter: fix a build error on openSUSE")
Suggested-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
missing attributes
If user does not specify hook number and priority, then assume this is
a chain/flowtable update. Therefore, report ENOENT which provides a
better hint than EINVAL. Set on extended netlink error report to refer
to the chain name.
Fixes: 5b6743fb2c2a ("netfilter: nf_tables: skip flowtable hooknum and priority on device updates")
Fixes: 5efe72698a97 ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sphinx reports htmldocs warnings:
Documentation/sound/kernel-api/writing-an-alsa-driver.rst:3997: WARNING: Literal block expected; none found.
Documentation/sound/kernel-api/writing-an-alsa-driver.rst:4004: WARNING: Literal block expected; none found.
Documentation/sound/kernel-api/writing-an-alsa-driver.rst:4009: WARNING: Unexpected indentation.
Documentation/sound/kernel-api/writing-an-alsa-driver.rst:4035: WARNING: Literal block expected; none found.
These are due to indentation of example driver snippets which is outside
the code block scope.
Fix these by indenting code blocks in question to the scope.
Fixes: 4d421eebe1465d ("ALSA: docs: writing-an-alsa-driver.rst: polishing")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/linux-doc/202305021822.4U6XOvGf-lkp@intel.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230503035416.62722-1-bagasdotme@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Common ALSA module parameters look a little bit confusing because of the
description lacking, and it took me a while to understand the purpose of
their existence. To figure it out I asked the question about them to the
"alsa-devel" mailing list, and Takashi Iwai answered me with the text I
appended to the ALSA documentation in this patch.
These common module parameters aren't used a lot nowadays, but as I
understand they are important for providing compatibility with some
existing user-space apps. So in my opinion it is a good idea to document
why we need them.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230501101634.476297-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have
a version of 3 or newer and the panel is in vid-mode.
This is based on the big comment around line 730 which starts with
"Panel enable/disable sequences from the VBT spec.", where
the "v3 video mode seq" column does not have any wait t# entries.
Checking the Windows driver shows that it does always honor
the VBT delays independent of the version of the VBT sequences.
Commit 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for
the panel_on_delay when there is no reset-deassert MIPI-sequence")
switched to a direct msleep() instead of intel_dsi_msleep()
when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix
the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.
And now testing on a Nextbook Ares 8A shows that panel_on_delay
must always be honored otherwise the panel will not turn on.
Instead of only always using regular msleep() for panel_on_delay
do as Windows does and always use regular msleep() everywhere
were intel_dsi_msleep() is used and drop the intel_dsi_msleep()
helper.
Changes in v2:
- Replace all intel_dsi_msleep() calls instead of just
the intel_dsi_msleep(panel_on_delay) call
Cc: stable@vger.kernel.org
Fixes: 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425194441.68086-1-hdegoede@redhat.com
(cherry picked from commit fa83c12132f71302f7d4b02758dc0d46048d3f5f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
CPU transcoder mask is used to iterate over the available
CPU transcoders in the macro for_each_cpu_transcoder().
The macro is broken on MTL and got highlighted when audio
state was being tracked for each transcoder added in [1].
Add the missing CPU transcoder mask which is similar to ADL-P
mask but without DSI transcoders.
[1]: https://patchwork.freedesktop.org/patch/523723/
Fixes: 7835303982d1 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Acked-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420221248.2511314-1-radhakrishna.sripada@intel.com
(cherry picked from commit bddc18913bd44adae5c828fd514d570f43ba1576)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Dan Carpenter pointed out that 'err' was not being set in the case
where the GuC firmware version range check fails. Fix that.
Note that while this is a bug fix for a previous patch (see Fixes tag
below). It is an exceedingly low risk bug. The range check is
asserting that the GuC firmware version is within spec. So it should
not be possible to ever have a firmware file that fails this check. If
larger version numbers are required in the future, that would be a
backwards breaking spec change and thus require a major version bump,
in which case an old i915 driver would not load that new version anyway.
Fixes: 9bbba0667f37 ("drm/i915/guc: Use GuC submission API version number")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421224742.2357198-1-John.C.Harrison@Intel.com
(cherry picked from commit 80ab31799002166ac7c660bacfbff4f85bc29107)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Two newly introduced functions are declared in a header that is not
included before the definition, causing a warning with sparse or
'make W=1':
kernel/module/dups.c:118:6: error: no previous prototype for 'kmod_dup_request_exists_wait' [-Werror=missing-prototypes]
118 | bool kmod_dup_request_exists_wait(char *module_name, bool wait, int *dup_ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/module/dups.c:220:6: error: no previous prototype for 'kmod_dup_request_announce' [-Werror=missing-prototypes]
220 | void kmod_dup_request_announce(char *module_name, int ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Add an explicit include to ensure the prototypes match.
Fixes: 8660484ed1cf ("module: add debugging auto-load duplicate module support")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304141440.DYO4NAzp-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Through testing I found out that hardware vlan rx offload support seems to
have some hardware issues. At least when using multiple MACs and when
receiving tagged packets on the secondary MAC, the hardware can sometimes
start to emit wrong tags on the first MAC as well.
In order to avoid such issues, drop the feature configuration and use
the offload feature only for DSA hardware untagging on MT7621/MT7622
devices where this feature works properly.
Fixes: 08666cbb7dd5 ("net: ethernet: mtk_eth_soc: add support for configuring vlan rx offload")
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230426172153.8352-1-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The deprecation for register_sysctl_paths() is over. We can rejoice as
we nuke register_sysctl_paths(). The routine register_sysctl_table()
was the only user left of register_sysctl_paths(), so we can now just
open code and move the implementation over to what used to be
to __register_sysctl_paths().
The old dynamic struct ctl_table_set *set is now the point to
sysctl_table_root.default_set.
The old dynamic const struct ctl_path *path was being used in the
routine register_sysctl_paths() with a static:
static const struct ctl_path null_path[] = { {} };
Since this is a null path we can now just simplfy the old routine
and remove its use as its always empty.
This saves us a total of 230 bytes.
$ ./scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 2/7 grow/shrink: 1/1 up/down: 1015/-1245 (-230)
Function old new delta
register_leaf_sysctl_tables.constprop - 524 +524
register_sysctl_table 22 497 +475
__pfx_register_leaf_sysctl_tables.constprop - 16 +16
null_path 8 - -8
__pfx_register_sysctl_paths 16 - -16
__pfx_register_leaf_sysctl_tables 16 - -16
__pfx___register_sysctl_paths 16 - -16
__register_sysctl_base 29 12 -17
register_sysctl_paths 18 - -18
register_leaf_sysctl_tables 534 - -534
__register_sysctl_paths 620 - -620
Total: Before=21259666, After=21259436, chg -0.00%
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
register_sysctl_paths() is only required if your child (directories)
have entries and pid_namespace does not. So use register_sysctl_init()
instead where we don't care about the return value and use
register_sysctl() where we do.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230302202826.776286-9-mcgrof@kernel.org
|
|
When (ARCH_STARFIVE [=n] && COMPILE_TEST [=y] && RESET_CONTROLLER [=n]),
RESET_STARFIVE_JH7110 can't be selected by CLK_STARFIVE_JH7110_SYS
and CLK_STARFIVE_JH7110_AON.
Add a condition `if RESET_CONTROLLER` to fix it. Also, delete redundant
selected options of CLK_STARFIVE_JH7110_AON because these options are
already selected by the dependency.
Fixes: edab7204afe5 ("clk: starfive: Add StarFive JH7110 system clock driver")
Fixes: b2ab3c94f41f ("clk: starfive: Add StarFive JH7110 always-on clock driver")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230418123756.62495-2-hal.feng@starfivetech.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
When building with clang + W=1, there is a warning around an internal
comparison check within the FIELD_PREP() macro, due to a 32-bit variable
comparison against ~0ull:
drivers/clk/clk-sp7021.c:316:8: error: result of comparison of constant 18446744073709551615 with expression of type 'typeof (_Generic((_m), ...' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
r0 |= HWM_FIELD_PREP(MASK_SEL_FRA, clk->p[SEL_FRA]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/clk-sp7021.c:45:15: note: expanded from macro 'HWM_FIELD_PREP'
(_m << 16) | FIELD_PREP(_m, value); \
^~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP'
__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK'
BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/compiler_types.h:397:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:385:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:377:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
This is expected given the types of the input. Increase the size of the
temporary variable in HWM_FIELD_PREP() to eliminate the warning, which
follows the logic of commit cfd6fb45cfaf ("crypto: ccree - avoid
out-of-range warnings from clang") for the same reasons.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230501-sp7021-field_prep-warning-v1-1-5b36d71feefe@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/202303221947.pXP2v4xJ-lkp@intel.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This reverts commit 156e96ff2172518b6f83e97d8f11f677bc668e22.
This patch was found to cause some division issues on the i.MX8MP
which causes the video clocks to not properly divide when division
was greate than 8. This causes video failures on disp1_pix and
disp2_pix clocks.
Until a better solution is found, we'll have to revert this.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20230423123828.1346511-1-aford173@gmail.com
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Change CONFIG_PER_VMA_LOCK_STATS to be disabled by default, as most users
don't need it. Add configuration help to clarify its usage.
Link: https://lkml.kernel.org/r/20230428173533.18158-1-surenb@google.com
Fixes: 52f238653e45 ("mm: introduce per-VMA lock statistics")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
@xilinx.com is still working but better to switch to new amd.com after
AMD/Xilinx acquisition.
Link: https://lkml.kernel.org/r/bd073d026f8c367a9cfb45d26d39f26e40c665dc.1683035692.git.michal.simek@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The refactoring in commit f4e9e0e69468 ("mm/mempolicy: fix use-after-free
of VMA iterator") introduces a subtle bug which arises when attempting to
apply a new NUMA policy across a range of VMAs in mbind_range().
The refactoring passes a **prev pointer to keep track of the previous VMA
in order to reduce duplication, and in all but one case it keeps this
correctly updated.
The bug arises when a VMA within the specified range has an equivalent
policy as determined by mpol_equal() - which unlike other cases, does not
update prev.
This can result in a situation where, later in the iteration, a VMA is
found whose policy does need to change. At this point, vma_merge() is
invoked with prev pointing to a VMA which is before the previous VMA.
Since vma_merge() discovers the curr VMA by looking for the one
immediately after prev, it will now be in a situation where this VMA is
incorrect and the merge will not proceed correctly.
This is checked in the VM_WARN_ON() invariant case with end >
curr->vm_end, which, if a merge is possible, results in a warning (if
CONFIG_DEBUG_VM is specified).
I note that vma_merge() performs these invariant checks only after
merge_prev/merge_next are checked, which is debatable as it hides this
issue if no merge is possible even though a buggy situation has arisen.
The solution is simply to update the prev pointer even when policies are
equal.
This caused a bug to arise in the 6.2.y stable tree, and this patch
resolves this bug.
Link: https://lkml.kernel.org/r/83f1d612acb519d777bebf7f3359317c4e7f4265.1682866629.git.lstoakes@gmail.com
Fixes: f4e9e0e69468 ("mm/mempolicy: fix use-after-free of VMA iterator")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304292203.44ddeff6-oliver.sang@intel.com
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a crash in relay_file_read, as the var from
point to the end of last subbuf.
The oops looks something like:
pc : __arch_copy_to_user+0x180/0x310
lr : relay_file_read+0x20c/0x2c8
Call trace:
__arch_copy_to_user+0x180/0x310
full_proxy_read+0x68/0x98
vfs_read+0xb0/0x1d0
ksys_read+0x6c/0xf0
__arm64_sys_read+0x20/0x28
el0_svc_common.constprop.3+0x84/0x108
do_el0_svc+0x74/0x90
el0_svc+0x1c/0x28
el0_sync_handler+0x88/0xb0
el0_sync+0x148/0x180
We get the condition by analyzing the vmcore:
1). The last produced byte and last consumed byte
both at the end of the last subbuf
2). A softirq calls function(e.g __blk_add_trace)
to write relay buffer occurs when an program is calling
relay_file_read_avail().
relay_file_read
relay_file_read_avail
relay_file_read_consume(buf, 0, 0);
//interrupted by softirq who will write subbuf
....
return 1;
//read_start point to the end of the last subbuf
read_start = relay_file_read_start_pos
//avail is equal to subsize
avail = relay_file_read_subbuf_avail
//from points to an invalid memory address
from = buf->start + read_start
//system is crashed
copy_to_user(buffer, from, avail)
Link: https://lkml.kernel.org/r/20230419040203.37676-1-zhang.zhengming@h3c.com
Fixes: 8d62fdebdaf9 ("relay file read: start-pos fix")
Signed-off-by: Zhang Zhengming <zhang.zhengming@h3c.com>
Reviewed-by: Zhao Lei <zhao_lei1@hoperun.com>
Reviewed-by: Zhou Kete <zhou.kete@h3c.com>
Reviewed-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
