summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-13EDAC/mc: Fix use-after-free and memleaks during device removalRobert Richter
A test kernel with the options DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK set, revealed several issues when removing an mci device: 1) Use-after-free: On 27.11.19 17:07:33, John Garry wrote: > [ 22.104498] BUG: KASAN: use-after-free in > edac_remove_sysfs_mci_device+0x148/0x180 The use-after-free is caused by the mci_for_each_dimm() macro called in edac_remove_sysfs_mci_device(). The iterator was introduced with c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator"). The iterator loop calls device_unregister(&dimm->dev), which removes the sysfs entry of the device, but also frees the dimm struct in dimm_attr_release(). When incrementing the loop in mci_for_each_dimm(), the dimm struct is accessed again, after having been freed already. The fix is to free all the mci device's subsequent dimm and csrow objects at a later point, in _edac_mc_free(), when the mci device itself is being freed. This keeps the data structures intact and the mci device can be fully used until its removal. The change allows the safe usage of mci_for_each_dimm() to release dimm devices from sysfs. 2) Memory leaks: Following memory leaks have been detected: # grep edac /sys/kernel/debug/kmemleak | sort | uniq -c 1 [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0 # mci->csrows 16 [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0 # csr->channels 16 [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0 # csr->channels[chn] 1 [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0 # mci->dimms 34 [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc() All leaks are from memory allocated by edac_mc_alloc(). Note: The test above shows that edac_mc_alloc() was called here from ghes_edac_register(), thus both functions show up in the stack trace but the module causing the leaks is edac_mc. The comments with the data structures involved were made manually by analyzing the objdump. The data structures listed above and created by edac_mc_alloc() are not properly removed during device removal, which is done in edac_mc_free(). There are two paths implemented to remove the device depending on device registration, _edac_mc_free() is called if the device is not registered and edac_unregister_sysfs() otherwise. The implemenations differ. For the sysfs case, the mci device removal lacks the removal of subsequent data structures (csrows, channels, dimms). This causes the memory leaks (see mci_attr_release()). [ bp: Massage commit message. ] Fixes: c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator") Fixes: faa2ad09c01c ("edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.") Fixes: 7a623c039075 ("edac: rewrite the sysfs code to use struct device") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: John Garry <john.garry@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200212120340.4764-3-rrichter@marvell.com
2020-02-13ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000Alexander Tsoy
It should be safe to ignore clock validity check result if the following conditions are met: - only one single sample rate is supported; - the terminal is directly connected to the clock source; - the clock type is internal. This is to deal with some Denon DJ controllers that always reports that clock is invalid. Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-02-12cifs: Fix mode output in debugging statementsFrank Sorenson
A number of the debug statements output file or directory mode in hex. Change these to print using octal. Signed-off-by: Frank Sorenson <sorenson@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-02-12io-wq: don't call kXalloc_node() with non-online nodeJens Axboe
Glauber reports a crash on init on a box he has: RIP: 0010:__alloc_pages_nodemask+0x132/0x340 Code: 18 01 75 04 41 80 ce 80 89 e8 48 8b 54 24 08 8b 74 24 1c c1 e8 0c 48 8b 3c 24 83 e0 01 88 44 24 20 48 85 d2 0f 85 74 01 00 00 <3b> 77 08 0f 82 6b 01 00 00 48 89 7c 24 10 89 ea 48 8b 07 b9 00 02 RSP: 0018:ffffb8be4d0b7c28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000e8e8 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000002080 RBP: 0000000000012cc0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000dc0 R11: ffff995c60400100 R12: 0000000000000000 R13: 0000000000012cc0 R14: 0000000000000001 R15: ffff995c60db00f0 FS: 00007f4d115ca900(0000) GS:ffff995c60d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000002088 CR3: 00000017cca66002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: alloc_slab_page+0x46/0x320 new_slab+0x9d/0x4e0 ___slab_alloc+0x507/0x6a0 ? io_wq_create+0xb4/0x2a0 __slab_alloc+0x1c/0x30 kmem_cache_alloc_node_trace+0xa6/0x260 io_wq_create+0xb4/0x2a0 io_uring_setup+0x97f/0xaa0 ? io_remove_personalities+0x30/0x30 ? io_poll_trigger_evfd+0x30/0x30 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4d116cb1ed which is due to the 'wqe' and 'worker' allocation being node affine. But it isn't valid to call the node affine allocation if the node isn't online. Setup structures for even offline nodes, as usual, but skip them in terms of thread setup to not waste resources. If the node isn't online, just alloc memory with NUMA_NO_NODE. Reported-by: Glauber Costa <glauber@scylladb.com> Tested-by: Glauber Costa <glauber@scylladb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-12hwmon: (pmbus/xdpe12284) fix typo in compatible stringsJohan Hovold
Make sure that the driver compatible strings matches the binding by removing the space between the manufacturer and model. Fixes: aaafb7c8eb1c ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers") Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200212092426.24012-1-johan@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-12linux/pipe_fs_i.h: fix kernel-doc warnings after @wait was splitRandy Dunlap
Fix kernel-doc warnings in struct pipe_inode_info after @wait was split into @rd_wait and @wr_wait. include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'rd_wait' not described in 'pipe_inode_info' include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'wr_wait' not described in 'pipe_inode_info' Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-12ice: Trivial fixesTony Nguyen
This is a collection of trivial fixes including fixing whitespace, typos, function headers, reverse Christmas tree, etc. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Use correct netif error functionBen Shelton
Use the correct netif_msg_[tx,rx]_error() function to determine whether to print the MDD event type. Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Cleanup ice_vsi_alloc_q_vectorsAnirudh Venkataramanan
1. Remove local variable num_q_vectors and use vsi->num_q_vectors instead 2. Remove local variable pf and pass vsi->back to ice_pf_to_dev Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Make print statements more compactAnirudh Venkataramanan
Formatting strings in print function calls (like dev_info, dev_err, etc.) can exceed 80 columns without making checkpatch unhappy. So remove newlines where applicable and make print statements more compact. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Use ice_pf_to_devAnirudh Venkataramanan
Use ice_pf_to_dev(pf) instead of &pf->pdev->dev Use ice_pf_to_dev(vsi->back) instead of &vsi->back->pdev->dev When a pointer to the pf instance is available, use ice_pf_to_dev instead of ice_hw_to_dev Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove possible null dereferenceTony Nguyen
Commit 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") moved the call to ice_construct_skb() under a null check as Coverity reported a possible use of null skb. However, the original call was not deleted, do so now. Fixes: 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: update Unit Load Status bitmask to check after resetBruce Allan
After a reset the Unit Load Status bits in the GLNVM_ULD register to check for completion should be 0x7FF before continuing. Update the mask to check (minus the three reserved bits that are always set). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: fix and consolidate logging of NVM/firmware version informationBruce Allan
Logging the firmware/NVM information during driver load is redundant since that information is also available via ethtool. Move the functionality found in ice_nvm_version_str() directly into ice_get_drvinfo() and remove calling the former and logging that info during driver probe. This also gets rid of a bug in ice_nvm_version_str() where it returns a pointer to a buffer which is free'ed when that function exits. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Modify link message loggingAkeem G Abodunrin
This patch modifies link message logging to include "Full Duplex" and "Negotiated" for FEC, so as to distinguish it from "Requested" FEC. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove CONFIG_PCI_IOV wrap in ice_set_pf_capsAnirudh Venkataramanan
Remove unnecessary CONFIG_PCI_IOV wrapping in ice_set_pf_caps. None of the data structures accessed within the block are wrapped with this flag. When CONFIG_PCI_IOV is undefined, pf->num_vfs_supported will be 0 anyway. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove ice_dev_onetime_setup()Brett Creeley
ice_dev_onetime_setup contains driver workarounds needed for firmware limitations. These issues have now been resolved in newer NVMs so remove the function. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Don't allow same value for Rx tail to be written twiceBrett Creeley
Currently we compare the value we are about to write to the Rx tail register with the previous value of next_to_use. The problem with this is we only write tail on 8 descriptor boundaries, but next_to_use is updated whenever we clean Rx descriptors. Fix this by comparing the value we are about to write to tail with the previously written tail value. This will prevent duplicate Rx tail bumps. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: display supported and advertised link modesPaul Greenwalt
Display all of the supported and advertised link modes based on the PHY capability with media. Displaying all supported modes is more informative then only displaying the current link mode. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix switch between FW and SW LLDPDave Ertman
When switching between FW and SW LLDP mode, the number of configured TLV apps in the driver's DCB configuration is getting out of synch with what lldpad thinks is configured. This is causing a problem when shutting down lldpad. The cleanup is trying to delete TLV apps that are not defined in the kernel. Since the driver is keeping an accurate account of the apps defined, use the drivers number of apps to determine if there is an app to delete. If the number of apps is <= 1, then do not attempt to delete. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix DCB rebuild after resetDave Ertman
The function ice_dcb_rebuild had some logic flaws in it, and also didn't differentiate between FW and SW modes needs. For FW flow, the willing setting was being forced to OFF and left that way. Unwilling in DCB FW mode is not a supported model. Leave the config alone and use the return value from the set command to determine if setting the config was successful. The SW DCB flow does not need to need to register for MIB change events (as they are not used in SW mode). Use !is_sw_lldp checks to only perform FW specific task while in FW mode. Also adding a reapplication of the current DCB config after a link event. Some NVMs are not maintaining their DCB configs across link events. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12docs: virt: guest-halt-polling.txt convert to ReSTMauro Carvalho Chehab
Due to some merge conflict, this file ended being alone under Documentation/virtual. The file itself is almost at ReST format. Just minor adjustments are needed: - Adjust title markup; - Adjust a list identation; - add a literal block markup; - Add some blank lines. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: review-checklist.txt: rename to ReSTMauro Carvalho Chehab
This file is already in ReST compatible format. So, rename it and add to the kvm's index.rst. While here, use the standard conversion for document titles. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert timekeeping.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Add markups for literal blocks; - Add markups for tables; - use :field: for field descriptions; - Add blank lines and adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert s390-diag.txt to ReST formatMauro Carvalho Chehab
This file is almost in ReST format. Just one change was needed: - Add markups for a literal block and change its indentation. While here, use the standard markup for the document title. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert ppc-pv.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Add markups for tables; - Use list markups; - Add markups for literal blocks; - Add blank lines. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert nested-vmx.txt to ReST formatMauro Carvalho Chehab
This file is almost in ReST format. Just a small set of changes were needed: - Add markups for lists; - Add markups for a literal block; - Adjust whitespaces. While here, use the standard markup for the document title. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert mmu.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Add markups for tables; - Add markups for literal blocks; - Add blank lines and adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert locking.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert hypercalls.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Convert tables; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: arm/psci.txt: convert to ReSTMauro Carvalho Chehab
- Add a title for the document; - Adjust whitespaces for it to be properly formatted after parsed. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert arm/hyp-abi.txt to ReSTMauro Carvalho Chehab
- Add proper markups for titles; - Adjust whitespaces and blank lines to match ReST needs; - Mark literal blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert api.txt to ReST formatMauro Carvalho Chehab
convert api.txt document to ReST format while trying to keep its format as close as possible with the authors intent, and avoid adding uneeded markups. - Use document title and chapter markups; - Convert tables; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/xive.txt to ReSTMauro Carvalho Chehab
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/xics.txt to ReSTMauro Carvalho Chehab
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - use :field: markups. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/vm.txt to ReSTMauro Carvalho Chehab
- Use title markups; - adjust indentation and add blank lines as needed; - use :field: markups; - Use cross-references; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/vfio.txt to ReSTMauro Carvalho Chehab
- Use standard title markup; - adjust lists; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/vcpu.txt to ReSTMauro Carvalho Chehab
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - use :field: markups; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/s390_flic.txt to ReSTMauro Carvalho Chehab
- Use standard markup for document title; - Adjust indentation and add blank lines as needed; - use the notes markup; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/mpic.txt to ReSTMauro Carvalho Chehab
This document is almost in ReST format. The only thing needed is to mark a list as such and to add an extra whitespace. Yet, let's also use the standard document title markup, as it makes easier if anyone wants later to add sessions to it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/arm-vgit.txt to ReSTMauro Carvalho Chehab
- Use title markups; - change indent to match ReST syntax; - use proper table markups; - use literal block markups. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: devices/arm-vgit-v3.txt to ReSTMauro Carvalho Chehab
- Use title markups; - change indent to match ReST syntax; - use proper table markups; - use literal block markups. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: devices/arm-vgic-its.txt to ReST formatMauro Carvalho Chehab
- Fix document title to match ReST format - Convert the table to be properly recognized - use proper markups for literal blocks - Some indentation fixes to match ReST While here, add an index for kvm devices. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: Convert msr.txt to ReST formatMauro Carvalho Chehab
- Use document title markup; - Convert tables; - Add blank lines and adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: convert halt-polling.txt to ReST formatMauro Carvalho Chehab
- Fix document title to match ReST format - Convert the table to be properly recognized - Some indentation fixes to match ReST syntax. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: user_mode_linux.rst: fix URL referencesMauro Carvalho Chehab
Several URLs are pointing to outdated places. Update the references for the URLs whose contents still exists, removing the others. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: user_mode_linux.rst: update compiling instructionsMauro Carvalho Chehab
Instead of pointing for a pre-2.4 and a seaparate patch, update it to match current upstream, as UML was merged a long time ago. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: convert UML documentation to ReSTMauro Carvalho Chehab
Despite being an old document, it contains lots of information that could still be useful. The document has a nice style with makes easy to convert to ReST. So, let's convert it to ReST. This patch does: - Use proper markups for titles; - Mark and proper indent literal blocks; - don't use an 'o' character for lists; - other minor changes required for the doc to be parsed. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: add arm/pvtime.rst to index.rstMauro Carvalho Chehab
Add this file to a new kvm/arm index.rst, in order for it to be shown as part of the virt book. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86: fix WARN_ON check of an unsigned less than zeroPaolo Bonzini
The check cpu->hv_clock.system_time < 0 is redundant since system_time is a u64 and hence can never be less than zero. But what was actually meant is to check that the result is positive, since kernel_ns and v->kvm->arch.kvmclock_offset are both s64. Reported-by: Colin King <colin.king@canonical.com> Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Addresses-Coverity: ("Macro compares unsigned to 0") Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 17:13:09 +0000