| Age | Commit message (Collapse) | Author |
|---|
|
Now as the arm-smmu-qcom driver gained workarounds for the A2NOC and
LPASS SMMU devices, enable those two devices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-5-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
L10A, being a fixed regulator, should have min_voltage = max_voltage,
otherwise fixed rulator fails to probe. Fix the max_voltage range to be
equal to minimum.
Fixes: 4edbcf264fe2 ("arm64: dts: qcom: sda660-ifc6560: document missing USB PHY supplies")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-4-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable Adreno GPU on the Inforce IFC6560 SBC. It requires the Zap shader
binary that was provided by the vendor.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-3-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Now as the arm-smmu-qcom driver gained workarounds for the Adreno SMMU,
it becomes possible to safely enable GPU on the devices. Enable GPU SMMU
and GPU clock controller. GPU should be enabled for target devices that
have ZAP shader blob.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-2-e316055142f8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Configure the ADC and thermal zone for the thermistor next to the
UFS+RAM chip which is connected to GPIO_12 of PM7250B. It is used to
measure the temperature of that area of the PCB.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20241002-fp5-ufs-therm-v1-1-1d2d8c1f08b5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Make sure the GPU frequencies are marked as supported for the respective
speedbins according to downstream msm-4.19 kernel:
* 850 MHz: Speedbins 0 + 180
* 800 MHz: Speedbins 0 + 180 + 169
* 650 MHz: Speedbins 0 + 180 + 169 + 138
* 565 MHz: Speedbins 0 + 180 + 169 + 138 + 120
* 430 MHz: Speedbins 0 + 180 + 169 + 138 + 120
* 355 MHz: Speedbins 0 + 180 + 169 + 138 + 120
* 253 MHz: Speedbins 0 + 180 + 169 + 138 + 120
Fixes: bd9b76750280 ("arm64: dts: qcom: sm6350: Add GPU nodes")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20241002-sm6350-gpu-speedbin-fix-v1-1-8a5d90c5097d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add an initial devicetree for the Microsoft Surface Pro 9 5G, based
on SC8280XP.
It enables the support for Wi-Fi, NVMe, the two USB Type-C ports,
Bluetooth, 5G cellular modem, audio output (via Bluetooth headsets
or USB audio), external display via DisplayPort over Type-C (only
the bottom USB Type-C port is working so far), charging, the Surface
Aggregator Module (SAM) to get keyboard and touchpad working with
Surface Type Cover accessories.
Some key features not supported yet:
- built-in display (but software fallback is working with efifb
when blacklisting the msm module)
- built-in display touchscreen
- external display with the top USB Type-C port
- speakers and microphones
- physical volume up and down keys
- LID switch detection
This devicetree is based on the other SC8280XP ones, for the Lenovo
ThinkPad X13s and the Qualcomm CRD.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Link: https://lore.kernel.org/r/20240908223505.21011-6-jerome.debretagne@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the node describing uart18 for sc8280xp devices.
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Link: https://lore.kernel.org/r/20240908223505.21011-5-jerome.debretagne@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible for the SC8280XP-based Microsoft Surface Pro 9 5G,
using its Arcata codename.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Link: https://lore.kernel.org/r/20240908223505.21011-2-jerome.debretagne@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DTS code coding style expects exactly one space around '='
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240905-dts-cleanup-v1-4-f4c5f7b2c8c2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.
Functional impact checked with comparing before/after DTBs with dtx_diff
and fdtdump.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240905-dts-cleanup-v1-3-f4c5f7b2c8c2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The USB MP controller is wired up to the USB-A port on the left side
and to the Surface Connector on the right side. Configure it.
While at it, remove a stray double \n.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240902-topic-sl7_updates-v1-2-3ee667e6652d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
One of the best parts of having a laptop is being able to close the lid
and go on with your day. Enable this feature by defining the lid switch.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240902-topic-sl7_updates-v1-1-3ee667e6652d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The SC7280, SM7325, and QCM6490 platforms feature an 8-core setup
consisting of:
- 1x Kryo 670 Prime (Cortex-A78) / Kryo 670 Gold Plus (Cortex-A78)
- 3x Kryo 670 Gold (Cortex-A78)
- 4x Kryo 670 Silver (Cortex-A55)
(The CPU cores in the SC7280 are simply called Kryo, but are
nevertheless based on the same Cortex A78 and A55).
Use the correct compatibility.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240818192905.120477-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This commit enables the debug UART found on the motherboard under the SSD
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Link: https://lore.kernel.org/r/20241004192436.16195-2-maccraft123mc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Describe the TCSR download mode register to enable download mode
control.
This specifically allows the OS to disable download mode in case the
boot firmware has left it enabled to avoid entering the crash dump mode
after a hypervisor reset by default.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241002100122.18809-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the venus node on Qualcomm Rb3gen2 so that the
video decoder will start working.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240917-venus_rb3_gen2-v1-1-8fea70733592@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-11-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-10-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-9-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-8-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-7-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-6-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-5-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-4-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-3-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-2-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp)
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3
Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-1-5b3a8662403d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add SD Card node for Qualcomm qcs6490-rb3gen2 Board.
Signed-off-by: Sachin Gupta <quic_sachgupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240919084826.1117-1-quic_sachgupt@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
node
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-QRD board.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-10-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
node
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-MTP board.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-9-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
node
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-HDK board.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-8-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable display clock controller for all Qualcomm SM8650 powered boards
by default.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-7-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
node
After a change enabling display clock controller for all Qualcomm SM8450
powered board by default there is no more need to set a status property
of dispcc on SM8450-HDK board.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-6-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable display clock controller for all Qualcomm SM8450 powered boards
by default.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
A platform display clock controller is expected to be enabled by default
for all boards, however in particular cases preset display clock setting
is expected. To avoid any probable regression before enabling display
clock controller for all SM8450 platforms disable it for SM8450 powered
Sony Xperia phones.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
A platform display clock controller is expected to be enabled by default
for all boards, however in particular cases preset display clock setting
is expected. To avoid any probable regression before enabling display
clock controller for all SM8450 platforms disable it for SM8450-QRD board
only.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
According to the description of dispcc device tree node from sm8350.dtsi
there is no need to set a status property value to enable the display clock
controller.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240924100602.3813725-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add HDMI controller and PHY nodes, ported from vendor code.
Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Link: https://lore.kernel.org/r/20240724-hdmi-tx-v7-6-e44a20553464@freebox.fr
[bjorn: Updated commit message]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
MSM8998 GPIO pin controller reference design defines:
- CEC: pin 31
- DDC: pin 32,33
- HPD: pin 34
Downstream vendor code for reference:
https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi#L2324-2400
mdss_hdmi_{cec,ddc,hpd}_{active,suspend}
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Link: https://lore.kernel.org/r/20240724-hdmi-tx-v7-5-e44a20553464@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable WiFi device and specify the calibration variant name on the
RB3gen2 device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240907-rb3g2-fixes-v1-4-eb9da98e9f80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable WiFi device and specify the calibration variant name on the
QCM6490 IDP device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240907-rb3g2-fixes-v1-3-eb9da98e9f80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On SC7280 and derivative platforms GPU by default requires a signed
binary, a660_zap.mbn. Disable GPU by default and enable it only when
the binary is actually available (QCM6490-IDP, RB3gen2). ChromeOS
devices do not use TrustZone, so GPU can be enabled by default in
sc7280-chrome-common.dtsi. FairPhone5 and SHIFTphone8 DTS already
enable GPU (even though it wasn't required beforehand).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-rb3g2-fixes-v1-2-eb9da98e9f80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Newer boards should always use squashed MBN firmware instead of split
MDT+bNN. Use qcom/qcs6490/modem.mbn as the firmware for the modem on
RB3gen2.
Fixes: ac6d35b9b74c ("arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240907-rb3g2-fixes-v1-1-eb9da98e9f80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
|
|
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
|
|
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
|
