| Age | Commit message (Collapse) | Author |
|---|
|
Make __thermal_zone_device_update() bail out if update_temperature()
fails to update the zone temperature because __thermal_zone_get_temp()
has returned an error and the current zone temperature is
THERMAL_TEMP_INVALID (user space receiving netlink thermal messages,
thermal debug code and thermal governors may get confused otherwise).
Fixes: 9ad18043fb35 ("thermal: core: Send trip crossing notifications at init time if needed")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Add missing empty line of code to thermal_zone_trip_id().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
If a thermal mitigation event is in progress, its duration value has
not been updated yet, so 0 will be printed as the event duration by
tze_seq_show() which is confusing.
Avoid doing that by marking the beginning of the event with the
KTIME_MIN duration value and making tze_seq_show() compute the current
event duration on the fly, in which case '>' will be printed instead of
'=' in the event duration value field.
Similarly, for trip points that have been crossed on the down, mark
the end of mitigation with the KTIME_MAX timestamp value and make
tze_seq_show() compute the current duration on the fly for the trip
points still involved in the mitigation, in which cases the duration
value printed by it will be prepended with a '>' character.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
If cdev_dt_seq_show() runs before the first state transition of a cooling
device, it will not print any state residency information for it, even
though it might be reasonably expected to print residency information for
the initial state of the cooling device.
For this reason, rearrange the code to get the initial state of a cooling
device at the registration time and pass it to thermal_debug_cdev_add(),
so that the latter can create a duration record for that state which will
allow cdev_dt_seq_show() to print its residency information.
Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information")
Reported-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Because thermal_debug_cdev_state_update() only creates a duration record
for the old state of a cooling device, if its new state is used for the
first time, there will be no record for it and cdev_dt_seq_show() will
not print the duration information for it even though it contains code
to compute the duration value in that case.
Address this by making thermal_debug_cdev_state_update() create a
duration record for the new state if there is none.
Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information")
Reported-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
|
|
Since thermal_debug_cdev_remove() does not run under cdev->lock, it can
run in parallel with thermal_debug_cdev_state_update() and it may free
the struct thermal_debugfs object used by the latter after it has been
checked against NULL.
If that happens, thermal_debug_cdev_state_update() will access memory
that has been freed already causing the kernel to crash.
Address this by using cdev->lock in thermal_debug_cdev_remove() around
the cdev->debugfs value check (in case the same cdev is removed at the
same time in two different threads) and its reset to NULL.
Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
With the current thermal zone locking arrangement in the debugfs code,
user space can open the "mitigations" file for a thermal zone before
the zone's debugfs pointer is set which will result in a NULL pointer
dereference in tze_seq_start().
Moreover, thermal_debug_tz_remove() is not called under the thermal
zone lock, so it can run in parallel with the other functions accessing
the thermal zone's struct thermal_debugfs object. Then, it may clear
tz->debugfs after one of those functions has checked it and the
struct thermal_debugfs object may be freed prematurely.
To address the first problem, pass a pointer to the thermal zone's
struct thermal_debugfs object to debugfs_create_file() in
thermal_debug_tz_add() and make tze_seq_start(), tze_seq_next(),
tze_seq_stop(), and tze_seq_show() retrieve it from s->private
instead of a pointer to the thermal zone object. This will ensure
that tz_debugfs will be valid across the "mitigations" file accesses
until thermal_debugfs_remove_id() called by thermal_debug_tz_remove()
removes that file.
To address the second problem, use tz->lock in thermal_debug_tz_remove()
around the tz->debugfs value check (in case the same thermal zone is
removed at the same time in two different threads) and its reset to NULL.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Because thermal_debug_tz_remove() does not free all memory allocated for
thermal zone diagnostics, some of that memory becomes unreachable after
freeing the thermal zone's struct thermal_debugfs object.
Address this by making thermal_debug_tz_remove() free all of the memory
in question.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Add a wrapper around the .trip_crossed() governor callback invocation
to reduce code duplications slightly and improve the code layout in
__thermal_zone_device_update().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Currently, tze_seq_show() output includes all of the trips in the zone
except for critical ones, including invalid trips and trips with no stats
which is confusing.
Make it skip the trips for which there is not mitigation information.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
thermal_debug_update_trip_stats()
Rename thermal_debug_update_temp() to thermal_debug_update_trip_stats()
which is a better match for the purpose of the function.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Notice that it is not necessary to compute tze in every iteration of the
for () loop in thermal_debug_update_temp() because it is the same for all
trips, so compute it once before the loop starts.
Also use a trip_stats local variable to make the code in that loop easier
to follow and move the trip_id variable definition into that loop because
it is not used elsewhere in the function.
While at it, change to order of local variable definitions in the function
to follow the reverse-xmas-tree pattern.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Since thermal_debug_update_temp() is called before invoking
thermal_debug_tz_trip_down() for the trips that were crossed by the
zone temperature on the way up, it updates the statistics for them
as though the current zone temperature was above the low temperature
of each of them. However, if a given trip has just been crossed on the
way down, the zone temperature is in fact below its low temperature,
but this is handled by thermal_debug_tz_trip_down() running after the
update of the trip statistics.
The remedy is to call thermal_debug_update_temp() after
thermal_debug_tz_trip_down() has been invoked for all of the
trips in question, but then thermal_debug_tz_trip_up() needs to
be adjusted, so it does not update the statistics for the trips
that has just been crossed on the way up, as that will be taken
care of by thermal_debug_update_temp() down the road.
Modify the code accordingly.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Modify handle_thermal_trip() to call handle_critical_trips() only after
finding that the trip temperature has been crossed on the way up and
remove the redundant temperature check from the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Since all of the governors in the tree have been switched over to using
the new callbacks, either .trip_crossed() or .manage(), the .throttle()
governor callback is not used any more, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Notifying user space about trip points that have not been crossed is
not particularly useful, so modify the User Space governor to use the
.trip_crossed() callback, which is only invoked for trips that have been
crossed, instead of .throttle() that is invoked for all trips in a
thermal zone every time the zone is updated.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The computations carried out by fair_share_throttle() for each trip
point include at least one redundant integer division which introduces
superfluous rounding errors. Also the multiplications by 100 in it are
not really necessary and can be eliminated.
Rearrange fair_share_throttle() to carry out only one integer division per
trip and only as many integer multiplications as necessary and rename one
variable in it (while at it).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
In principle, the Fair Share governor should take trip hysteresis
into account. After all, once a trip has been crossed on the way up,
mitigation is still needed until it is crossed on the way down.
For this reason, make it use trip thresholds that are computed by
the core when trips are crossed, so as to apply mitigations if the
zone temperature is in a hysteresis rage of one or more trips that
were crossed on the way up, but have not been crossed on the way
down yet.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
The Fair Share governor tries very hard to be stateless and so it
calls get_trip_level() from fair_share_throttle() every time, even
though the number produced by this function for all of the trips
during a given thermal zone update is actually the same. Since
get_trip_level() walks all of the trips in the thermal zone every
time it is called, doing this may generate quite a bit of completely
useless overhead.
For this reason, make the governor use the new .manage() callback
instead of .throttle() which allows it to call get_trip_level() just
once and use the value computed by it to handle all of the trips.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Do some assorted cleanups in thermal_zone_trip_update():
* Compute the trend value upfront.
* Move old_target definition to the block where it is used.
* Adjust white space around diagnostic messages and locking.
* Use suitable field formatting in a message to avoid an explicit
cast to int.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
In principle, the Step-Wise governor should take trip hysteresis into
account. After all, once a trip has been crossed on the way up,
mitigation is still needed until it is crossed on the way down.
For this reason, make it use trip thresholds that are computed by
the core when trips are crossed, so as to apply mitigations in the
hysteresis rages of trips that were crossed on the way up, but have
not been crossed on the way down yet.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Make the Step-Wise governor use the new .manage() callback instead of
.throttle().
Even though using .throttle() is not particularly problematic for the
Step-Wise governor, using .manage() instead still allows it to reduce
overhead by updating all of the cooling devices once after setting
target values for all of the thermal instances.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Notice that the passive field in struct thermal_zone_device is not
used by the Power Allocator governor itself and so the ordering of
its updates with respect to allow_maximum_power() or allocate_power()
does not matter.
Accordingly, make power_allocator_manage() update that field right
before returning, which allows the current value of it to be passed
directly to allow_maximum_power() without using the additional update
variable that can be dropped.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
The Power Allocator governor really only wants to be called once per
thermal zone update and it does a special check to skip the extra,
from its perspective, invocations of the .throttle() callback.
Make it use .manage() instead of .throttle().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Introduce a new thermal governor callback called .manage() that will be
invoked once per thermal zone update after processing all of the trip
points in the core.
This will allow governors that look at multiple trip points together
to check all of them in a consistent configuration, so they don't need
to play tricks with skipping .throttle() invocations that they are not
interested in and they can avoid carrying out the same computations for
multiple times in one cycle.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fold thermal_zone_trip_update() into bang_bang_control() which is the
only caller of it to reduce code size and make it easier to follow.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Do the following cleanups in thermal_zone_trip_update():
* Drop the useless "zero hysteresis" message.
* Eliminate the trip_index local variable that is redundant.
* Drop 2 comments that are not useful.
* Downgrade a diagnostic message from pr_warn() to pr_debug().
* Use consistent field formatting in diagnostic messages.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Bang-Bang governor really is only concerned about trip point
crossing, so it can use the new .trip_crossed() callback instead of
.throttle() that is not particularly suitable for it.
Modify it to do so which also takes trip hysteresis into account, so the
governor does not need to use it directly any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.9-rc5.
Included in here are the following:
- binder driver fix for reported problem
- speakup crash fix
- mei driver fixes for reported problems
- comdei driver fix
- interconnect driver fixes
- rtsx driver fix
- peci.h kernel doc fix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
peci: linux/peci.h: fix Excess kernel-doc description warning
binder: check offset alignment in binder_get_object()
comedi: vmk80xx: fix incomplete endpoint checking
mei: vsc: Unregister interrupt handler for system suspend
Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
misc: rtsx: Fix rts5264 driver status incorrect when card removed
mei: me: disable RPL-S on SPS and IGN firmwares
speakup: Avoid crash on very long word
interconnect: Don't access req_list while it's being manipulated
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull kernfs bugfix and documentation update from Greg KH:
"Here are two changes for 6.9-rc5 that deal with "driver core" stuff,
that do the following:
- sysfs reference leak fix
- embargoed-hardware-issues.rst update for Power
Both of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for Power
fs: sysfs: Fix reference leak in sysfs_break_active_protection()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.9-rc5 that
resolve a bunch of reported problems. Included in here are:
- MAINTAINERS and .mailmap update for Richard Genoud
- serial core regression fixes from 6.9-rc1 changes
- pci id cleanups
- serial core crash fix
- stm32 driver fixes
- 8250 driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: Reset .throttled state in .startup()
serial: stm32: Return IRQ_NONE in the ISR if no handling happend
serial: core: Fix missing shutdown and startup for serial base port
serial: core: Clearing the circular buffer before NULLifying it
MAINTAINERS: mailmap: update Richard Genoud's email address
serial/pmac_zilog: Remove flawed mitigation for rx irq flood
serial: 8250_pci: Remove redundant PCI IDs
serial: core: Fix regression when runtime PM is not enabled
serial: mxs-auart: add spinlock around changing cts state
serial: 8250_dw: Revert: Do not reclock if already at correct rate
serial: 8250_lpc18xx: disable clks on error in probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
Included in here are:
- MAINTAINER file update for invalid email address
- usb-serial device id updates
- typec driver fixes
- thunderbolt / usb4 driver fixes
- usb core shutdown fixes
- cdc-wdm driver revert for reported problem in -rc1
- usb gadget driver fixes
- xhci driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: serial: option: add Telit FN920C04 rmnet compositions
usb: dwc3: ep0: Don't reset resource alloc flag
Revert "usb: cdc-wdm: close race between read and workqueue"
USB: serial: option: add Rolling RW101-GL and RW135-GL support
USB: serial: option: add Lonsung U8300/U9300 product
USB: serial: option: add support for Fibocom FM650/FG650
USB: serial: option: support Quectel EM060K sub-models
USB: serial: option: add Fibocom FM135-GL variants
usb: misc: onboard_usb_hub: Disable the USB hub clock on failure
thunderbolt: Avoid notify PM core about runtime PM resume
thunderbolt: Fix wake configurations after device unplug
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
usb: typec: mux: it5205: Fix ChipID value typo
MAINTAINERS: Drop Li Yang as their email address stopped working
usb: gadget: fsl: Initialize udc before using it
usb: Disable USB3 LPM at shutdown
usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
usb: typec: tcpm: Correct the PDO counting in pd_set
usb: gadget: functionfs: Wait for fences before enqueueing DMABUF
usb: gadget: functionfs: Fix inverted DMA fence direction
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Add a missing memory barrier in the concurrency ID mm switching
* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Add missing memory barrier in switch_mm_cid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ
- Print the correct error code when FRED reports a bad event type
- Add a FRED-specific INT80 handler without the special dances that
need to happen in the current one
- Enable the using-the-default-return-thunk-but-you-should-not warning
only on configs which actually enable those special return thunks
- Check the proper feature flags when selecting BHI retpoline
mitigation
* tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
x86/fred: Fix incorrect error code printout in fred_bad_type()
x86/fred: Fix INT80 emulation for FRED
x86/retpolines: Enable the default thunk warning only on relevant configs
x86/bugs: Fix BHI retpoline check
|
|
Pull block fixes from Jens Axboe:
"Just two minor fixes that should go into the 6.9 kernel release, one
fixing a regression with partition scanning errors, and one fixing a
WARN_ON() that can get triggered if we race with a timer"
* tag 'block-6.9-20240420' of git://git.kernel.dk/linux:
blk-iocost: do not WARN if iocg was already offlined
block: propagate partition scanning errors to the BLKRRPART ioctl
|
|
Pull email address update from James Bottomley:
"My IBM email has stopped working, so update to a working email
address"
* tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
MAINTAINERS: update to working email address
|
|
Pull kvm fixes from Paolo Bonzini:
"This is a bit on the large side, mostly due to two changes:
- Changes to disable some broken PMU virtualization (see below for
details under "x86 PMU")
- Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
return thunk in use. This should not happen!" when running KVM
selftests.
Everything else is small bugfixes and selftest changes:
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
where KVM would allow userspace to refresh the cache with a bogus
GPA. The bug has existed for quite some time, but was exposed by a
new sanity check added in 6.9 (to ensure a cache is either
GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
got left behind during a 6.9 cleanup.
- Fix a math goof in x86's hugepage logic for
KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
(detected by KASAN).
- Fix a bug where KVM incorrectly clears root_role.direct when
userspace sets guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect
SPTEs used by a nested guest, if KVM is using Page-Modification
Logging and the nested hypervisor is NOT using EPT.
x86 PMU:
- Drop support for virtualizing adaptive PEBS, as KVM's
implementation is architecturally broken without an obvious/easy
path forward, and because exposing adaptive PEBS can leak host LBRs
to the guest, i.e. can leak host kernel addresses to the guest.
- Set the enable bits for general purpose counters in
PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
processors.
- Disable LBR virtualization on CPUs that don't support LBR
callstacks, as KVM unconditionally uses
PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
would fail on such CPUs.
Tests:
- Fix a flaw in the max_guest_memory selftest that results in it
exhausting the supply of ucall structures when run with more than
256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in
set_memory_region_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
perf/x86/intel: Expose existence of callback support to KVM
KVM: VMX: Snapshot LBR capabilities during module initialization
KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
KVM: SVM: Remove a useless zeroing of allocated memory
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix wireguard loading failure on pre-Power10 due to Power10 crypto
routines
- Fix papr-vpd selftest failure due to missing variable initialization
- Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev()
Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan
Lynch, and Shivaprasad G Bhat.
* tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc/papr-vpd: Fix missing variable initialization
powerpc/crypto/chacha-p10: Fix failure on non Power10
powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple clk driver fixes, a build fix, and a deadlock fix:
- Mediatek mt7988 has broken PCIe because the wrong parent is used
- Mediatek clk drivers may deadlock when registering their clks
because the clk provider device is repeatedly runtime PM resumed
and suspended during probe and clk registration.
Resuming the clk provider device deadlocks with an ABBA deadlock
due to genpd_lock and the clk prepare_lock. The fix is to keep the
device runtime resumed while registering clks.
- Another runtime PM related deadlock, this time with disabling
unused clks during late init.
We get an ABBA deadlock where a device is runtime PM resuming (or
suspending) while the disabling of unused clks is happening in
parallel. That runtime PM action calls into the clk framework and
tries to grab the clk prepare_lock while the disabling of unused
clks holds the prepare_lock and is waiting for that runtime PM
action to complete.
The fix is to runtime resume all the clk provider devices before
grabbing the clk prepare_lock during disable unused.
- A build fix to provide an empty devm_clk_rate_exclusive_get()
function when CONFIG_COMMON_CLK=n"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port
clk: mediatek: Do a runtime PM get on controllers during probe
clk: Get runtime PM before walking tree for clk_summary
clk: Get runtime PM before walking tree during disable_unused
clk: Initialize struct clk_core kref earlier
clk: Don't hold prepare_lock when calling kref_put()
clk: Remove prepare_lock hold assertion in __clk_release()
clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get()
|
|
jejb@linux.ibm.com no longer works.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A random set of small bug fixes:
- Fix perf annotate TUI when used with data type profiling
- Work around BPF verifier about sighand lock checking
And a set of kernel header synchronization"
* tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools/include: Sync arm64 asm/cputype.h with the kernel sources
tools/include: Sync asm-generic/bitops/fls.h with the kernel sources
tools/include: Sync x86 asm/msr-index.h with the kernel sources
tools/include: Sync x86 asm/irq_vectors.h with the kernel sources
tools/include: Sync x86 CPU feature headers with the kernel sources
tools/include: Sync uapi/sound/asound.h with the kernel sources
tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources
tools/include: Sync uapi/linux/fs.h with the kernel sources
tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
perf lock contention: Add a missing NULL check
perf annotate: Make sure to call symbol__annotate2() in TUI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Correctly disable UBSAN configs in configs/hardening (Nathan
Chancellor)
- Add missing signed integer overflow trap types to arm64 handler
* tag 'hardening-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ubsan: Add awareness of signed integer overflow traps
configs/hardening: Disable CONFIG_UBSAN_SIGNED_WRAP
configs/hardening: Fix disabling UBSAN configurations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two fixes for the selftests:
- CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work
- The kconfig fragment sshould include fault injection so the fault
injection test can work"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Add config needed for iommufd_fail_nth
iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest
|
|
Pull rdma fixes from Jason Gunthorpe:
- Add a missing mutex_destroy() in rxe
- Enhance the debugging print for cm_destroy failures to help debug
these
- Fix mlx5 MAD processing in cases where multiport devices are running
in switchedev mode
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix port number for counter query in multi-port configuration
RDMA/cm: Print the old state when cm_destroy_id gets timeout
RDMA/rxe: Fix the problem "mutex_destroy missing"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull fs/9p fixes from Eric Van Hensbergen:
"This contains a reversion of one of the original 6.9 patches which
seems to have been the cause of most of the instability. It also
incorporates several fixes to legacy support and cache fixes.
There are few additional changes to improve stability, but I want
another week of testing before sending them upstream"
* tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: drop inodes immediately on non-.L too
fs/9p: Revert "fs/9p: fix dups even in uncached mode"
fs/9p: remove erroneous nlink init from legacy stat2inode
9p: explicitly deny setlease attempts
fs/9p: fix the cache always being enabled on files with qid flags
fs/9p: translate O_TRUNC into OTRUNC
fs/9p: only translate RWX permissions for plain 9P2000
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix two bugs in the new passthrough mode
- Fix a statx bug introduced in v6.6
- Fix code documentation
* tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
cuse: add kernel-doc comments to cuse_process_init_reply()
fuse: fix leaked ENOSYS error on first statx call
fuse: fix parallel dio write on file open in passthrough mode
fuse: fix wrong ff->iomode state changes from parallel dio write
|
|
Introduce a new thermal governor callback called .trip_crossed()
that will be invoked whenever a trip point is crossed by the zone
temperature, either on the way up or on the way down.
The trip crossing direction information will be passed to it and if
multiple trips are crossed in the same direction during one thermal zone
update, the new callback will be invoked for them in temperature order,
either ascending or descending, depending on the trip crossing
direction.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix a kernel fault during page table walking in huge_pte_alloc() with
PTABLE_LEVELS=5 due to using p4d_offset() instead of p4d_alloc()
- head.S fix and cleanup to disable the MMU before toggling the
HCR_EL2.E2H bit when entering the kernel with the MMU on from the EFI
stub. Changing this bit (currently from VHE to nVHE) causes some
system registers as well as page table descriptors to be interpreted
differently, potentially resulting in spurious MMU faults
- Fix translation fault in swsusp_save() accessing MEMBLOCK_NOMAP
memory ranges due to kernel_page_present() returning true in most
configurations other than rodata_full == true,
CONFIG_DEBUG_PAGEALLOC=y or CONFIG_KFENCE=y
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hibernate: Fix level3 translation fault in swsusp_save()
arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
arm64/head: Drop unnecessary pre-disable-MMU workaround
arm64/hugetlb: Fix page table walk in huge_pte_alloc()
|
