summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-18net: mscc: ocelot: error checking when calling ocelot_init()Vladimir Oltean
ocelot_init() allocates memory, resets the switch and polls for a status register, things which can fail. Stop probing the driver in that case, and propagate the error result. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: check for errors on memory allocation of portsVladimir Oltean
Do not proceed probing if we couldn't allocate memory for the ports array, just error out. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: dsa: seville: fix buffer size of the queue systemVladimir Oltean
The VSC9953 Seville switch has 2 megabits of buffer split into 4360 words of 60 bytes each. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: add locking for the port TX timestamp IDVladimir Oltean
The ocelot_port->ts_id is used to: (a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ with an skb. (b) populate the REW_OP from the injection header of the ongoing skb. Only then is ocelot_port->ts_id incremented. This is a problem because, at least theoretically, another timestampable skb might use the same ocelot_port->ts_id before that is incremented. Normally all transmit calls are serialized by the netdev transmit spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also called by DSA, which has started declaring the NETIF_F_LLTX feature since commit 2b86cb829976 ("net: dsa: declare lockless TX feature for slave ports"). So the logic of using and incrementing the timestamp id should be atomic per port. The solution is to use the global ocelot_port->ts_id only while protected by the associated ocelot_port->ts_id_lock. That's where we populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb is called for the actual skb, but for felix, it is called for the skb's clone. That is something which will also be changed in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: fix race condition with TX timestampingVladimir Oltean
The TX-timestampable skb is added late to the ocelot_port->tx_skbs. It is in a race with the TX timestamp IRQ, which checks that queue trying to match the timestamp with the skb by the ts_id. The skb should be added to the queue before the IRQ can fire. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18i2c: mediatek: Send i2c master code at more than 1MHzQii Wang
The master code needs to being sent when the speed is more than I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the latest I2C-bus specification and user manual. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: mediatek: Fix generic definitions for bus frequencyQii Wang
The max frequency of mediatek i2c controller driver is I2C_MAX_HIGH_SPEED_MODE_FREQ, not I2C_MAX_FAST_MODE_PLUS_FREQ. Fix it. Fixes: 90224e6468e1 ("i2c: drivers: Use generic definitions for bus frequencies") Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18Merge tag 'sh-for-5.9-part2' of git://git.libc.org/linux-shLinus Torvalds
Pull arch/sh fixes from Rich Felker: "Fixes for build and function regression" * tag 'sh-for-5.9-part2' of git://git.libc.org/linux-sh: sh: fix syscall tracing sh: remove spurious circular inclusion from asm/smp.h
2020-09-18Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Allow CPUs affected by erratum 1418040 to come online late (previously we only fixed the other case - CPUs not affected by the erratum coming up late). - Fix branch offset in BPF JIT. - Defer the stolen time initialisation to the CPU online time from the CPU starting time to avoid a (sleep-able) memory allocation in an atomic context. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: paravirt: Initialize steal time when cpu is online arm64: bpf: Fix branch offset in JIT arm64: Allow CPUs unffected by ARM erratum 1418040 to come in late
2020-09-18Merge tag 'powerpc-5.9-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.9: - Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing crashes. - Fix a long standing bug in our DMA mask handling that was hidden until recently, and which caused problems with some drivers. - Fix a boot failure on systems with large amounts of RAM, and no hugepage support and using Radix MMU, only seen in the lab. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy, Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav Jain, and Vaidyanathan Srinivasan" * tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute cpuidle: pseries: Fix CEDE latency conversion from tb to us powerpc/dma: Fix dma_map_ops::get_required_mask Revert "powerpc/build: vdso linker warning for orphan sections" powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc selftests/powerpc: Skip PROT_SAO test in guests/LPARS powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
2020-09-18Merge tag 'pm-5.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new CPU ID to the RAPL power capping driver and prevent the ACPI processor idle driver from triggering RCU-lockdep complaints. Specifics: - Add support for the Lakefield chip to the RAPL power capping driver (Ricardo Neri). - Modify the ACPI processor idle driver to prevent it from triggering RCU-lockdep complaints which has started to happen after recent changes in that area (Peter Zijlstra)" * tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: processor: Take over RCU-idle for C3-BM idle cpuidle: Allow cpuidle drivers to take over RCU-idle ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP powercap: RAPL: Add support for Lakefield
2020-09-18Merge tag 'sound-5.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here is a collection of fixes for 5.9. All look small and are nothing scary. The majority of changes are about ASoC driver- specific fixes, while there are a couple of ASoC core fixes (DAI lookup and lockdep stuff) and usual HD-audio quirks" * tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: hda/realtek - The Mic on a RedmiBook doesn't work ASoC: tlv320adcx140: Wake up codec before accessing register ASoC: core: Do not cleanup uninitialized dais on soc_pcm_open failure ALSA: hda: fixup headset for ASUS GX502 laptop ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN Converter9 2-in-1 ASoC: Intel: haswell: Fix power transition refactor ASoC: tlv320adcx140: Fix accessing uninitialized adcx140->dev ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functions ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811 ASoC: meson: axg-toddr: fix channel order on g12 platforms ASoC: soc-core: add snd_soc_find_dai_with_mutex() ASoC: qcom: common: Fix refcount imbalance on error ASoC: rt700: Fix return check for devm_regmap_init_sdw() ASoC: rt715: Fix return check for devm_regmap_init_sdw() ASoC: rt711: Fix return check for devm_regmap_init_sdw() ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw() ASoC: max98373: Fix return check for devm_regmap_init_sdw() ASoC: ti: fixup ams_delta_mute() function name ASoC: pcm3168a: ignore 0 Hz settings ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case ...
2020-09-18kprobes: tracing/kprobes: Fix to kill kprobes on initmem after bootMasami Hiramatsu
Since kprobe_event= cmdline option allows user to put kprobes on the functions in initmem, kprobe has to make such probes gone after boot. Currently the probes on the init functions in modules will be handled by module callback, but the kernel init text isn't handled. Without this, kprobes may access non-exist text area to disable or remove it. Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2 Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter") Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18Merge tag 'iommu-fixes-v5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Two fixes for the AMD IOMMU driver: - Fix a potential NULL-ptr dereference found by smatch - Fix interrupt remapping when a device is assigned to a guest and AVIC is enabled" * tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_mode iommu/amd: Fix potential @entry null deref
2020-09-18Merge tag 'mtd/fixes-for-5.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD/SPI NOR fixes from Vignesh Raghavendra: "Revert patches that caused non volatile Quad Enable bit to be cleared for certain SPI NOR flashes during module remove or during shutdown, thus breaking backward compatibility" Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> * tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: Revert "mtd: spi-nor: Add capability to disable flash quad mode" Revert "mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()"
2020-09-18objtool: Fix noreturn detection for ignored functionsJosh Poimboeuf
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool doesn't validate its code paths. It also skips sibling call detection within the function. But sibling call detection is actually needed for the case where the ignored function doesn't have any return instructions. Otherwise objtool naively marks the function as implicit static noreturn, which affects the reachability of its callers, resulting in "unreachable instruction" warnings. Fix it by just enabling sibling call detection for ignored functions. The 'insn->ignore' check in add_jump_destinations() is no longer needed after e6da9567959e ("objtool: Don't use ignore flag for fake jumps"). Fixes the following warning: arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com
2020-09-18tracing: fix double freeTom Rix
clang static analyzer reports this problem trace_events_hist.c:3824:3: warning: Attempt to free released memory kfree(hist_data->attrs->var_defs.name[i]); In parse_var_defs() if there is a problem allocating var_defs.expr, the earlier var_defs.name is freed. This free is duplicated by free_var_defs() which frees the rest of the list. Because free_var_defs() has to run anyway, remove the second free fom parse_var_defs(). Link: https://lkml.kernel.org/r/20200907135845.15804-1-trix@redhat.com Cc: stable@vger.kernel.org Fixes: 30350d65ac56 ("tracing: Add variable support to hist triggers") Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18ftrace: Let ftrace_enable_sysctl take a kernel pointer bufferTobias Klauser
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of ftrace_enable_sysctl to match ctl_table.proc_handler which fixes the following sparse warning: kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces) kernel/trace/ftrace.c:7544:43: expected void * kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite()Marc Zyngier
Now that kvm_vcpu_trap_is_write_fault() checks for S1PTW, there is no need for kvm_vcpu_dabt_iswrite() to do the same thing, as we already check for this condition on all existing paths. Drop the check and add a comment instead. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200915104218.1284701-3-maz@kernel.org
2020-09-18KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetchMarc Zyngier
KVM currently assumes that an instruction abort can never be a write. This is in general true, except when the abort is triggered by a S1PTW on instruction fetch that tries to update the S1 page tables (to set AF, for example). This can happen if the page tables have been paged out and brought back in without seeing a direct write to them (they are thus marked read only), and the fault handling code will make the PT executable(!) instead of writable. The guest gets stuck forever. In these conditions, the permission fault must be considered as a write so that the Stage-1 update can take place. This is essentially the I-side equivalent of the problem fixed by 60e21a0ef54c ("arm64: KVM: Take S1 walks into account when determining S2 write faults"). Update kvm_is_write_fault() to return true on IABT+S1PTW, and introduce kvm_vcpu_trap_is_exec_fault() that only return true when no faulting on a S1 fault. Additionally, kvm_vcpu_dabt_iss1tw() is renamed to kvm_vcpu_abt_iss1tw(), as the above makes it plain that it isn't specific to data abort. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200915104218.1284701-2-maz@kernel.org
2020-09-18tracing: Make the space reserved for the pid widerSebastian Andrzej Siewior
For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to 4194304. During boot the kernel sets a new value based on number of CPUs but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default becomes 131072 which needs six digits. This value can be increased during run time but must not exceed the initial upper limit. Systemd sometime after v241 sets it to the upper limit during boot. The result is that when the pid exceeds five digits, the trace output is a little hard to read because it is no longer properly padded (same like on big iron with 98+ CPUs). Increase the pid padding to seven digits. Link: https://lkml.kernel.org/r/20200904082331.dcdkrr3bkn3e4qlg@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18ftrace: Fix missing synchronize_rcu() removing trampoline from kallsymsAdrian Hunter
Add synchronize_rcu() after list_del_rcu() in ftrace_remove_trampoline_from_kallsyms() to protect readers of ftrace_ops_trampoline_list (in ftrace_get_trampoline_kallsym) which is used when kallsyms is read. Link: https://lkml.kernel.org/r/20200901091617.31837-1-adrian.hunter@intel.com Fixes: fc0ea795f53c8d ("ftrace: Add symbols for ftrace trampolines") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18ftrace: Free the trampoline when ftrace_startup() failsMiroslav Benes
Commit fc0ea795f53c ("ftrace: Add symbols for ftrace trampolines") missed to remove ops from new ftrace_ops_trampoline_list in ftrace_startup() if ftrace_hash_ipmodify_enable() fails there. It may lead to BUG if such ops come from a module which may be removed. Moreover, the trampoline itself is not freed in this case. Fix it by calling ftrace_trampoline_free() during the rollback. Link: https://lkml.kernel.org/r/20200831122631.28057-1-mbenes@suse.cz Fixes: fc0ea795f53c ("ftrace: Add symbols for ftrace trampolines") Fixes: f8b8be8a310a ("ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict") Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()Masami Hiramatsu
Commit 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") fixed one bug but not completely fixed yet. If we run a kprobe_module.tc of ftracetest, kernel showed a warning as below. # ./ftracetest test.d/kprobe/kprobe_module.tc === Ftrace unit tests === [1] Kprobe dynamic event - probing module ... [ 22.400215] ------------[ cut here ]------------ [ 22.400962] Failed to disarm kprobe-ftrace at trace_printk_irq_work+0x0/0x7e [trace_printk] (-2) [ 22.402139] WARNING: CPU: 7 PID: 200 at kernel/kprobes.c:1091 __disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.403358] Modules linked in: trace_printk(-) [ 22.404028] CPU: 7 PID: 200 Comm: rmmod Not tainted 5.9.0-rc2+ #66 [ 22.404870] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 22.406139] RIP: 0010:__disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.406947] Code: 30 8b 03 eb c9 80 3d e5 09 1f 01 00 75 dc 49 8b 34 24 89 c2 48 c7 c7 a0 c2 05 82 89 45 e4 c6 05 cc 09 1f 01 01 e8 a9 c7 f0 ff <0f> 0b 8b 45 e4 eb b9 89 c6 48 c7 c7 70 c2 05 82 89 45 e4 e8 91 c7 [ 22.409544] RSP: 0018:ffffc90000237df0 EFLAGS: 00010286 [ 22.410385] RAX: 0000000000000000 RBX: ffffffff83066024 RCX: 0000000000000000 [ 22.411434] RDX: 0000000000000001 RSI: ffffffff810de8d3 RDI: ffffffff810de8d3 [ 22.412687] RBP: ffffc90000237e10 R08: 0000000000000001 R09: 0000000000000001 [ 22.413762] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88807c478640 [ 22.414852] R13: ffffffff8235ebc0 R14: ffffffffa00060c0 R15: 0000000000000000 [ 22.415941] FS: 00000000019d48c0(0000) GS:ffff88807d7c0000(0000) knlGS:0000000000000000 [ 22.417264] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.418176] CR2: 00000000005bb7e3 CR3: 0000000078f7a000 CR4: 00000000000006a0 [ 22.419309] Call Trace: [ 22.419990] kill_kprobe+0x94/0x160 [ 22.420652] kprobes_module_callback+0x64/0x230 [ 22.421470] notifier_call_chain+0x4f/0x70 [ 22.422184] blocking_notifier_call_chain+0x49/0x70 [ 22.422979] __x64_sys_delete_module+0x1ac/0x240 [ 22.423733] do_syscall_64+0x38/0x50 [ 22.424366] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 22.425176] RIP: 0033:0x4bb81d [ 22.425741] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e0 ff ff ff f7 d8 64 89 01 48 [ 22.428726] RSP: 002b:00007ffc70fef008 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 [ 22.430169] RAX: ffffffffffffffda RBX: 00000000019d48a0 RCX: 00000000004bb81d [ 22.431375] RDX: 0000000000000000 RSI: 0000000000000880 RDI: 00007ffc70fef028 [ 22.432543] RBP: 0000000000000880 R08: 00000000ffffffff R09: 00007ffc70fef320 [ 22.433692] R10: 0000000000656300 R11: 0000000000000246 R12: 00007ffc70fef028 [ 22.434635] R13: 0000000000000000 R14: 0000000000000002 R15: 0000000000000000 [ 22.435682] irq event stamp: 1169 [ 22.436240] hardirqs last enabled at (1179): [<ffffffff810df542>] console_unlock+0x422/0x580 [ 22.437466] hardirqs last disabled at (1188): [<ffffffff810df19b>] console_unlock+0x7b/0x580 [ 22.438608] softirqs last enabled at (866): [<ffffffff81c0038e>] __do_softirq+0x38e/0x490 [ 22.439637] softirqs last disabled at (859): [<ffffffff81a00f42>] asm_call_on_stack+0x12/0x20 [ 22.440690] ---[ end trace 1e7ce7e1e4567276 ]--- [ 22.472832] trace_kprobe: This probe might be able to register after target module is loaded. Continue. This is because the kill_kprobe() calls disarm_kprobe_ftrace() even if the given probe is not enabled. In that case, ftrace_set_filter_ip() fails because the given probe point is not registered to ftrace. Fix to check the given (going) probe is enabled before invoking disarm_kprobe_ftrace(). Link: https://lkml.kernel.org/r/159888672694.1411785.5987998076694782591.stgit@devnote2 Fixes: 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: ACPI: processor: Take over RCU-idle for C3-BM idle cpuidle: Allow cpuidle drivers to take over RCU-idle ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
2020-09-19kconfig: qconf: use delete[] instead of delete to free array (again)Masahiro Yamada
Commit c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array") fixed two lines, but there is one more. (cppcheck does not report it for some reason...) This was detected by Clang. "make HOSTCXX=clang++ xconfig" reports the following: scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete] delete data; ^ [] scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here char *data = new char[count + 1]; ^ Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Fixes: c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2020-09-18mac80211: fix 80 MHz association to 160/80+80 AP on 6 GHzJohn Crispin
When trying to associate to an AP support 180 or 80+80 MHz on 6 GHz with a STA that only has 80 Mhz support the cf2 field inside the chandef will get set causing the association to fail when trying to validate the chandef. Fix this by checking the support flags prior to setting cf2. Fixes: 57fa5e85d53ce ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200918115304.1135693-1-john@phrozen.org [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: do not allow bigger VHT MPDUs than the hardware supportsFelix Fietkau
Limit maximum VHT MPDU size by local capability. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200917125031.45009-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18cfg80211: fix 6 GHz channel conversionJohannes Berg
We shouldn't accept any channels bigger than 233, fix that. Reported-by: Amar <asinghal@codeaurora.org> Fixes: d1a1646c0de7 ("cfg80211: adapt to new channelization of the 6GHz band") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200917115222.312ba6f1d461.I3a8c8fbcc3cc019814fd9cd0aced7eb591626136@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: do not disable HE if HT is missing on 2.4 GHzWen Gong
VHT is not supported on 2.4 GHz, but HE is; don't disable HE if HT is missing there, do that only on 5 GHz (6 GHz is only HE). Fixes: 57fa5e85d53ce51 ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/010101747cb617f2-593c5410-1648-4a42-97a0-f3646a5a6dd1-000000@us-west-2.amazonses.com [rewrite the commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: Fix radiotap header channel flag for 6GHz bandAloka Dixit
Radiotap header field 'Channel flags' has '2 GHz spectrum' set to 'true' for 6GHz packet. Change it to 5GHz as there isn't a separate option available for 6GHz. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/010101747ab7b703-1d7c9851-1594-43bf-81f7-f79ce7a67cc6-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18lib80211: fix unmet direct dependendices config warning when !CRYPTONecip Fazil Yildiran
When LIB80211_CRYPT_CCMP is enabled and CRYPTO is disabled, it results in unmet direct dependencies config warning. The reason is that LIB80211_CRYPT_CCMP selects CRYPTO_AES and CRYPTO_CCM, which are subordinate to CRYPTO. This is reproducible with CRYPTO disabled and R8188EU enabled, where R8188EU selects LIB80211_CRYPT_CCMP but does not select or depend on CRYPTO. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: a11e2f85481c ("lib80211: use crypto API ccm(aes) transform for CCMP processing") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://lore.kernel.org/r/20200909095452.3080-1-fazilyildiran@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: add AQL support for VHT160 tx ratesFelix Fietkau
When converting from struct ieee80211_tx_rate to ieee80211_rx_status, there was one check missing to fill in the bandwidth for 160 MHz Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200915085945.3782-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: extend AQL aggregation estimation to HE and fix unit mismatchFelix Fietkau
The unit of the return value of ieee80211_get_rate_duration is nanoseconds, not microseconds. Adjust the duration checks to account for that. For higher data rates, allow larger estimated aggregation sizes, and add some values for HE as well, which can use much larger aggregates. Since small packets with high data rates can now lead to duration values too small for info->tx_time_est, return a minimum of 4us. Fixes: f01cfbaf9b29 ("mac80211: improve AQL aggregation estimation for low data rates") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200915085945.3782-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_modeSuravee Suthikulpanit
Commit e52d58d54a32 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE") removed an assumption that modify_irte_ga always set the valid bit, which requires the callers to set the appropriate value for the struct irte_ga.valid bit before calling the function. Similar to the commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE"), which is for the function amd_iommu_deactivate_guest_mode(). The same change is also needed for the amd_iommu_activate_guest_mode(). Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with AVIC enabled. Fixes: e52d58d54a321 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Cc: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/20200916111720.43913-1-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-18iommu/amd: Fix potential @entry null derefJoao Martins
After commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE"), smatch warns: drivers/iommu/amd/iommu.c:3870 amd_iommu_deactivate_guest_mode() warn: variable dereferenced before check 'entry' (see line 3867) Fix this by moving the @valid assignment to after @entry has been checked for NULL. Fixes: 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20200910171621.12879-1-joao.m.martins@oracle.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-18x86/unwind/fp: Fix FP unwinding in ret_from_forkJosh Poimboeuf
There have been some reports of "bad bp value" warnings printed by the frame pointer unwinder: WARNING: kernel stack regs at 000000005bac7112 in sh:1014 has bad 'bp' value 0000000000000000 This warning happens when unwinding from an interrupt in ret_from_fork(). If entry code gets interrupted, the state of the frame pointer (rbp) may be undefined, which can confuse the unwinder, resulting in warnings like the above. There's an in_entry_code() check which normally silences such warnings for entry code. But in this case, ret_from_fork() is getting interrupted. It recently got moved out of .entry.text, so the in_entry_code() check no longer works. It could be moved back into .entry.text, but that would break the noinstr validation because of the call to schedule_tail(). Instead, initialize each new task's RBP to point to the task's entry regs via an encoded frame pointer. That will allow the unwinder to reach the end of the stack gracefully. Fixes: b9f6976bfb94 ("x86/entry/64: Move non entry code into .text section") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/f366bbf5a8d02e2318ee312f738112d0af74d16f.1600103007.git.jpoimboe@redhat.com
2020-09-17Merge branch 'for-5.9-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu fix from Dennis Zhou: "This is a fix for the first chunk size calculation where the variable length array incorrectly used the number of longs instead of bytes of longs. This came in as a code fix and not a bug report, so I don't think it was widely problematic. I believe it worked out due to it being memblock memory and alignment requirements working in our favor" * 'for-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: fix first chunk size calculation for populated bitmap
2020-09-17nfp: use correct define to return NONE fecJakub Kicinski
struct ethtool_fecparam carries bitmasks not bit numbers. We want to return 1 (NONE), not 0. Fixes: 0d0870938337 ("nfp: implement ethtool FEC mode settings") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "A bunch of small fixes, some of the i915 ones have been out for a while and got better commit msg explaining some better reasoning behind them (hopefully this trend continues). Otherwise there a few AMD related ones mostly small, one radeon PLL regression fix and a bunch of small mediatek fixes. amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards i915: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function mediatek: - Fix scrolling of panel - Remove duplicated include - Use CPU when fail to get cmdq event - Add missing put_device() call" * tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amd/display: Don't log hdcp module warnings in dmesg drm/amdgpu: declare ta firmware for navy_flounder drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata() drm/mediatek: Add missing put_device() call in mtk_drm_kms_init() drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init() drm/mediatek: Use CPU when fail to get cmdq event drm/mediatek: Remove duplicated include drm/i915: Filter wake_flags passed to default_wake_function drm/i915: Be wary of data races when reading the active execlists drm/i915/gem: Reduce context termination list iteration guard to RCU drm/i915/gem: Delay tracking the GEM context until it is registered drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is drm/radeon: revert "Prefer lower feedback dividers" drm/amdgpu: Include sienna_cichlid in USBC PD FW support. drm/amd/display: update nv1x stutter latencies drm/amd/display: Don't use DRM_ERROR() for DTM add topology drm/amd/pm: support runtime pptable update for sienna_cichlid etc. drm/amdkfd: fix a memory leak issue drm/kfd: fix a system crash issue during GPU recovery ...
2020-09-17hinic: fix potential resource leakWei Li
In rx_request_irq(), it will just return what irq_set_affinity_hint() returns. If it is failed, the napi and irq requested are not freed properly. So add exits for failures to handle these. Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge branch 'net-phy-Unbind-fixes'David S. Miller
Florian Fainelli says: ==================== net: phy: Unbind fixes This patch series fixes a couple of issues with the unbinding of the PHY drivers and then bringing down a network interface. The first is a NULL pointer de-reference and the second was an incorrect warning being triggered. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Do not warn in phy_stop() on PHY_DOWNFlorian Fainelli
When phy_is_started() was added to catch incorrect PHY states, phy_stop() would not be qualified against PHY_DOWN. It is possible to reach that state when the PHY driver has been unbound and the network device is then brought down. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Avoid NPD upon phy_detach() when driver is unboundFlorian Fainelli
If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17ethtool: add and use message type for tunnel info replyMichal Kubecek
Tunnel offload info code uses ETHTOOL_MSG_TUNNEL_INFO_GET message type (cmd field in genetlink header) for replies to tunnel info netlink request, i.e. the same value as the request have. This is a problem because we are using two separate enums for userspace to kernel and kernel to userspace message types so that this ETHTOOL_MSG_TUNNEL_INFO_GET (28) collides with ETHTOOL_MSG_CABLE_TEST_TDR_NTF which is what message type 28 means for kernel to userspace messages. As the tunnel info request reached mainline in 5.9 merge window, we should still be able to fix the reply message type without breaking backward compatibility. Fixes: c7d759eb7b12 ("ethtool: add tunnel info interface") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/hdlc: Set skb->protocol before transmittingXie He
This patch sets skb->protocol before transmitting frames on the HDLC device, so that a user listening on the HDLC device with an AF_PACKET socket will see outgoing frames' sll_protocol field correctly set and consistent with that of incoming frames. 1. Control frames in hdlc_cisco and hdlc_ppp When these drivers send control frames, skb->protocol is not set. This value should be set to htons(ETH_P_HDLC), because when receiving control frames, their skb->protocol is set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, which then calls cisco_type_trans or ppp_type_trans. The skb->protocol of control frames is set to htons(ETH_P_HDLC) so that the control frames can be received by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the control frames. 2. hdlc_fr When this driver sends control frames, skb->protocol is set to internal values used in this driver. When this driver sends data frames (from upper stacked PVC devices), skb->protocol is the same as that of the user data packet being sent on the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3) (for Ethernet-emulating PVC devices). However, skb->protocol for both control frames and data frames should be set to htons(ETH_P_HDLC), because when receiving, all frames received on the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, and because this driver doesn't provide a type_trans function in struct hdlc_proto, all frames will have their skb->protocol set to htons(ETH_P_HDLC). The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx to process the frames (control frames are consumed and data frames are re-received on upper PVC devices). Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/lapbether: Make skb->protocol consistent with the headerXie He
This driver is a virtual driver stacked on top of Ethernet interfaces. When this driver transmits data on the Ethernet device, the skb->protocol setting is inconsistent with the Ethernet header prepended to the skb. This causes a user listening on the Ethernet interface with an AF_PACKET socket, to see different sll_protocol values for incoming and outgoing frames, because incoming frames would have this value set by parsing the Ethernet header. This patch changes the skb->protocol value for outgoing Ethernet frames, making it consistent with the Ethernet header prepended. This makes a user listening on the Ethernet device with an AF_PACKET socket, to see the same sll_protocol value for incoming and outgoing frames. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17cxgb4: fix memory leak during module unloadRaju Rangoju
Fix the memory leak in mps during module unload path by freeing mps reference entries if the list adpter->mps_ref is not already empty Fixes: 28b3870578ef ("cxgb4: Re-work the logic for mps refcounting") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17hv_netvsc: Add validation for untrusted Hyper-V valuesAndres Beltran
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause indexing off the end of an array, or subvert an existing validation via integer overflow. Ensure that outgoing packets do not have any leftover guest memory that has not been zeroed out. Signed-off-by: Andres Beltran <lkmlabelt@gmail.com> Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge tag 'mediatek-drm-fixes-5.9' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.9 1. Fix scrolling of panel 2. Remove duplicated include 3. Use CPU when fail to get cmdq event 4. Add missing put_device() call Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916231724.30571-1-chunkuang.hu@kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 12:43:11 +0000