summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-03ARM: mxs: use auxdata to attach mxsfb_platform_dataShawn Guo
Use auxdata to attach mxsfb_platform_data for imx23-evk and imx28-evk. We take this as a temporary solution for removing those board files, and it should be updated to use common bindings for struct fb_videomode when it becomes available. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03video: mxsfb: add simple device tree probeShawn Guo
Add a simple device tree probe support for mxsfb driver. Before a common binding for struct fb_videomode is available, the driver will keep using struct mxsfb_platform_data. That said, platform code will use auxdata to attach mxsfb_platform_data for device tree boot. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03video: mxsfb: move mxsfb.h into include/linuxShawn Guo
Move mxsfb.h into include/linux, so that mxsfb driver does not have to include <mach/*> header. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03rtc: stmp3xxx: Add simple binding for the stmp3xxx-rtcMarek Vasut
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: rtc-linux@googlegroups.com Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: mxs: enable flexcan on imx28Marc Kleine-Budde
As the flexcan driver has DT binding for some time now. This patch makes the flexcan driver available in the can drivers menu if a SOC with flexcan is enabled. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: dts: cfa10036: Add Power LED to the CFA-10036 boardMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: mxs: Add Crystalfontz CFA-10036 DTSMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Brian Lily <brian@crystalfontz.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: dts: imx28: Add additionnal muxing options to iMX28 DTSIMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Brian Lily <brian@crystalfontz.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: mxs: store mac address read from OTP in device treeShawn Guo
The non-DT boot reads the mac from OTP and pass it to fec driver via platform data. The patch provides an equivalent support for device tree boot, with reading mac from OTP and store it in device tree, and fec driver can get the mac from device tree at its probe time. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: dts: mx28evk: Add auart0 and auart3 supportFabio Estevam
Add auart0 and auart3 support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03serial: mxs-auart: Allow device tree probingFabio Estevam
Allow device tree probing. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Alan Cox <alan@linux.intel.com> Cc: <linux-serial@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Subodh Nijsure <snijsure@grid-net.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: dts: imx23: Fix the gpmi/gpmi-nand DT nameMarek Vasut
Replace "gpmi" with "gpmi-nand" to get the GPMI interface probing with DT instead of failing to get clock. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Detlev Zundel <dzu@denx.de> CC: Dong Aisheng <b29396@freescale.com> CC: Fabio Estevam <fabio.estevam@freescale.com> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: mx28: add gpmi-nand supportHuang Shijie
add gpmi-nand device tree support. add gpmi-nand pinctrl support. Also enable the gpmi support for mx28-evk board. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: imx6q: add clocks for gpmi-nandHuang Shijie
Add clocks for gpmi-nand. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-02Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull a couple more powerpc fixes from Benjamin Herrenschmidt: "Here are two more fixes that I "missed" when scrubbing patchwork last week which are worth still having in 3.5." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/kvm: sldi should be sld powerpc/xmon: Use cpumask iterator to avoid warning
2012-07-03security: document no_new_privsAndy Lutomirski
Document no_new_privs. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-07-03ARM: imx: enable flexcan on imx25, imx35, imx53, imx6qMarc Kleine-Budde
Aas the flexcan driver has DT binding for some time now. This patch makes the flexcan driver available in the can drivers menu if a SOC with flexcan is enabled. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03md/raid5: fix refcount problem when blocked_rdev is set.NeilBrown
commit 43220aa0f22cd3ce5b30246d50ccd696d119edea md/raid5: fix a hang on device failure. fixed a hang, but introduced a refcounting in-balance so that if the presence of bad-blocks ever caused an rdev to be 'blocked' we would increment the refcount on the rdev and never decrement it. So added the needed rdev_dec_pending when md_wait_for_blocked_rdev is not called. Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03md:Add blk_plug in sync_thread.majianpeng
Add blk_plug in sync_thread will increase the performance of sync. Because sync_thread did not blk_plug,so when raid sync, the bio merge not well. Testing environment: SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller. OS:Linux xxx 3.5.0-rc2+ #340 SMP Tue Jun 12 09:00:25 CST 2012 x86_64 x86_64 x86_64 GNU/Linux. RAID5: four ST31000524NS disk. Without blk_plug:recovery speed about 63M/Sec; Add blk_plug:recovery speed about 120M/Sec. Using blktrace: blktrace -d /dev/sdb -w 60 -o -|blkparse -i - without blk_plug: Total (8,16): Reads Queued: 309811, 1239MiB Writes Queued: 0, 0KiB Read Dispatches: 283583, 1189MiB Write Dispatches: 0, 0KiB Reads Requeued: 0 Writes Requeued: 0 Reads Completed: 273351, 1149MiB Writes Completed: 0, 0KiB Read Merges: 23533, 94132KiB Write Merges: 0, 0KiB IO unplugs: 0 Timer unplugs: 0 add blk_plug: Total (8,16): Reads Queued: 428697, 1714MiB Writes Queued: 0, 0KiB Read Dispatches: 3954, 1714MiB Write Dispatches: 0, 0KiB Reads Requeued: 0 Writes Requeued: 0 Reads Completed: 3956, 1715MiB Writes Completed: 0, 0KiB Read Merges: 424743, 1698MiB Write Merges: 0, 0KiB IO unplugs: 0 Timer unplugs: 3384 The ratio of merge will be markedly increased. Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03md/raid5: In ops_run_io, inc nr_pending before calling md_wait_for_blocked_rdevmajianpeng
In ops_run_io(), the call to md_wait_for_blocked_rdev will decrement nr_pending so we lose the reference we hold on the rdev. So atomic_inc it first to maintain the reference. This bug was introduced by commit 73e92e51b7969ef5477d md/raid5. Don't write to known bad block on doubtful devices. which appeared in 3.0, so patch is suitable for stable kernels since then. Cc: stable@vger.kernel.org Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03md/raid5: Do not add data_offset before call to is_badblockmajianpeng
In chunk_aligned_read() we are adding data_offset before calling is_badblock. But is_badblock also adds data_offset, so that is bad. So move the addition of data_offset to after the call to is_badblock. This bug was introduced by commit 31c176ecdf3563140e639 md/raid5: avoid reading from known bad blocks. which first appeared in 3.0. So that patch is suitable for any -stable kernel from 3.0.y onwards. However it will need minor revision for most of those (as the comment didn't appear until recently). Cc: stable@vger.kernel.org Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03md/raid5: prefer replacing failed devices over want-replacement devices.NeilBrown
If a RAID5 has both a failed device and a device marked as 'WantReplacement', then we should preferentially replace the failed device. However the current code replaces whichever is found first. So split into 2 loops, check fail failed/missing first, and only check for WantReplacement if nothing is failed or missing. Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03md/raid10: Don't try to recovery unmatched (and unused) chunks.NeilBrown
If a RAID10 has an odd number of chunks - as might happen when there are an odd number of devices - the last chunk has no pair and so is not mirrored. We don't store data there, but when recovering the last device in an array we retry to recover that last chunk from a non-existent location. This results in an error, and the recovery aborts. When we get to that last chunk we should just stop - there is nothing more to do anyway. This bug has been present since the introduction of RAID10, so the patch is appropriate for any -stable kernel. Cc: stable@vger.kernel.org Reported-by: Christian Balzer <chibi@gol.com> Tested-by: Christian Balzer <chibi@gol.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-02KVM: Sanitize KVM_IRQFD flagsAlex Williamson
We only know of one so far. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-02KVM: Add missing KVM_IRQFD API documentationAlex Williamson
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-02KVM: Pass kvm_irqfd to functionsAlex Williamson
Prune this down to just the struct kvm_irqfd so we can avoid changing function definition for every flag or field we use. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-02Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixesArnd Bergmann
* 'fixes' of git://github.com/hzhuang1/linux: ARM: pxa: hx4700: Fix basic suspend/resume
2012-07-02Btrfs: run delayed directory updates during log replayChris Mason
While we are resolving directory modifications in the tree log, we are triggering delayed metadata updates to the filesystem btrees. This commit forces the delayed updates to run so the replay code can find any modifications done. It stops us from crashing because the directory deleltion replay expects items to be removed immediately from the tree. Signed-off-by: Chris Mason <chris.mason@fusionio.com> cc: stable@kernel.org
2012-07-02Btrfs: hold a ref on the inode during writepagesJosef Bacik
We can race with unlink and not actually be able to do our igrab in btrfs_add_ordered_extent. This will result in all sorts of problems. Instead of doing the complicated work to try and handle returning an error properly from btrfs_add_ordered_extent, just hold a ref to the inode during writepages. If we cannot grab a ref we know we're freeing this inode anyway and can just drop the dirty pages on the floor, because screw them we're going to invalidate them anyway. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2012-07-02Btrfs: fix tree log remove space corner caseJosef Bacik
The tree log stuff can have allocated space that we end up having split across a bitmap and a real extent. The free space code does not deal with this, it assumes that if it finds an extent or bitmap entry that the entire range must fall within the entry it finds. This isn't necessarily the case, so rework the remove function so it can handle this case properly. This fixed two panics the user hit, first in the case where the space was initially in a bitmap and then in an extent entry, and then the reverse case. Thanks, Reported-and-tested-by: Shaun Reich <sreich@kde.org> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2012-07-02Btrfs: fix wrong check during log recoveryLiu Bo
When we're evicting an inode during log recovery, we need to ensure that the inode is not in orphan state any more, which means inode's run_time flags has _no_ BTRFS_INODE_HAS_ORPHAN_ITEM. Thus, the BUG_ON was triggered because of a wrong check for the flags. Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2012-07-02Btrfs: use _IOR for BTRFS_IOC_SUBVOL_GETFLAGSAlexander Block
We used the wrong ioctl macro for the getflags ioctl before. As we don't have the set/getflags ioctls in the user space ioctl.h at the moment, it's safe to fix it now. Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Alexander Block <ablock84@googlemail.com>
2012-07-02Btrfs: resume balance on rw (re)mounts properlyIlya Dryomov
This introduces btrfs_resume_balance_async(), which, given that restriper state was recovered earlier by btrfs_recover_balance(), resumes balance in btrfs-balance kthread. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-07-02Btrfs: restore restriper state on all mountsIlya Dryomov
Fix a bug that triggered asserts in btrfs_balance() in both normal and resume modes -- restriper state was not properly restored on read-only mounts. This factors out resuming code from btrfs_restore_balance(), which is now also called earlier in the mount sequence to avoid the problem of some early writes getting the old profile. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-07-02Btrfs: fix dio write vs buffered read raceJosef Bacik
Miao pointed out there's a problem with mixing dio writes and buffered reads. If the read happens between us invalidating the page range and actually locking the extent we can bring in pages into page cache. Then once the write finishes if somebody tries to read again it will just find uptodate pages and we'll read stale data. So we need to lock the extent and check for uptodate bits in the range. If there are uptodate bits we need to unlock and invalidate again. This will keep this race from happening since we will hold the extent locked until we create the ordered extent, and then teh read side always waits for ordered extents. There was also a race in how we updated i_size, previously we were relying on the generic DIO stuff to adjust the i_size after the DIO had completed, but this happens outside of the extent lock which means reads could come in and not see the updated i_size. So instead move this work into where we create the extents, and then this way the update ordered i_size stuff works properly in the endio handlers. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-07-02Btrfs: don't count I/O statistic read errors for missing devicesStefan Behrens
It is normal behaviour of the low level btrfs function btrfs_map_bio() to complete a bio with -EIO if the device is missing, instead of just preventing the bio creation in an earlier step. This used to cause I/O statistic read error increments and annoying printk_ratelimited messages. This commit fixes the issue. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Reported-by: Carey Underwood <cwillu@cwillu.com>
2012-07-02ARM: OMAP4: TWL6030: ensure sys_nirq1 is mux'd and wakeup enabledKevin Hilman
The SYS_NIRQ1 pin is the interupt line for the PMIC part of the TWL6030 and interrupts from the PMIC are needed as wakeup sources. Ensure this pin is mux'd as input and has wakeup enabled so PMIC interupts (e.g. RTC) can be used as wakeup sources. Tested on OMAP4430/Panda. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-02ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failureKevin Hilman
In order for suspend/resume dependencies to work correctly, I2C has to be initialized (more specifically, registered with the driver core) before MMC. Without this, the MMC driver fails to adjust the VMMC regulator (using i2c writes) during the suspend path. Problem found testing suspend/resume on 3730/OveroSTORM platform. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-02ARM: imx27_visstrim_m10: Do not include <asm/system.h>Fabio Estevam
commit 435ca24 (ARM i.MX: Visstrim_M10: Add board version detection) included <asm/system.h>, which is a header file about to be deleted according to 9f97da (Disintegrate asm/system.h for ARM) Include <asm/system_info.h> instead. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-02arm/dts: omap3-evm: Add i2c and twl4030 supportVaibhav Hiremath
Add support for TWL4030, which is interfaced on i2c1 bus. Also add clock frequencies for other i2c instances (2 & 3) required for client-device exist on OMAP3EVM board. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-02arm/dts: Add support for TI AM3517/05 EVM boardVaibhav Hiremath
Add AM3517 EVM (AM3517/05) DTS file to use the omap3.dtsi SoC file, along with memory node and basic i2c information. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-02arm/dts: OMAP2: Add support for OMAP2420H4 BoardJon Hunter
Simple DTS file for OMAP2420H4 board adding memory information to allow device-tree testing on an OMAP2420. OMAP2420H4 board has 64MB of RAM. Verified that kernel boots with DT using a simple RAMDISK file-system on OMAP2420H4. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-02powerpc/kvm: sldi should be sldMichael Neuling
Since we are taking a registers, this should never have been an sldi. Talking to paulus offline, this is the correct fix. Was introduced by: commit 19ccb76a1938ab364a412253daec64613acbf3df Author: Paul Mackerras <paulus@samba.org> Date: Sat Jul 23 17:42:46 2011 +1000 Talking to paulus, this shouldn't be a literal. Signed-off-by: Michael Neuling <mikey@neuling.org> CC: <stable@kernel.org> [v3.2+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-02powerpc/xmon: Use cpumask iterator to avoid warningAnton Blanchard
We have a bug report where the kernel hits a warning in the cpumask code: WARNING: at include/linux/cpumask.h:107 Which is: WARN_ON_ONCE(cpu >= nr_cpumask_bits); The backtrace is: cpu_cmd cmds xmon_core xmon die xmon is iterating through 0 to NR_CPUS. I'm not sure why we are still open coding this but iterating above nr_cpu_ids is definitely a bug. This patch iterates through all possible cpus, in case we issue a system reset and CPUs in an offline state call in. Perhaps the old code was trying to handle CPUs that were in the partition but were never started (eg kexec into a kernel with an nr_cpus= boot option). They are going to die way before we get into xmon since we haven't set any kernel state up for them. Signed-off-by: Anton Blanchard <anton@samba.org> CC: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-02ARM: imx6q: add DT node for gpmi nandHuang Shijie
Add the DT node for gpmi nand. Add the pinmux support for gpmi nand. The gpmi nand may conflicts with other modules, such as MMC. So we do not enable the gpmi nand for mx6q-arm2 board, just add the node for the board. Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-02ARM: imx6q: add clock for apbh-dmaHuang Shijie
add clock for apbh-dma. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-02ARM: imx6q: add DT node for apbh-dmaHuang Shijie
add DT node for apbh-dma. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-01ARM: LPC32xx: Update DTS file for EA3250 boardRoland Stigge
This DTS file update adds: * 3-channel ADC (for AD-IN on AD2, or 3-axis-accelerometer) * Interrupt key Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-07-01Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull two ARM fixes from Russell King: "It's been fairly quiet with the fixes. Just two this time. One fixes a long standing problem with KALLSYMS needing an additional pass, and the other sorts a problem with the vmalloc space interacting with static IO mappings." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7438/1: fill possible PMD empty section gaps ARM: 7428/1: Prevent KALLSYM size mismatch on ARM.
2012-07-01ARM: 7438/1: fill possible PMD empty section gapsNicolas Pitre
On ARM with the 2-level page table format, a PMD entry is represented by two consecutive section entries covering 2MB of virtual space. However, static mappings always were allowed to use separate 1MB section entries. This means in practice that a static mapping may create half populated PMDs via create_mapping(). Since commit 0536bdf33f (ARM: move iotable mappings within the vmalloc region) those static mappings are located in the vmalloc area. We must ensure no such half populated PMDs are accessible once vmalloc() or ioremap() start looking at the vmalloc area for nearby free virtual address ranges, or various things leading to a kernel crash will happen. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: "R, Sricharan" <r.sricharan@ti.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 14:49:29 +0000