summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-05watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware formatAnson Huang
SCU firmware calculates pretimeout based on current time stamp instead of watchdog timeout stamp, need to convert the pretimeout to SCU firmware's timeout value. Fixes: 15f7d7fc5542 ("watchdog: imx_sc: Add pretimeout support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: meson: Fix the wrong value of left timeXingyu Chen
The left time value is wrong when we get it by sysfs. The left time value should be equal to preset timeout value minus elapsed time value. According to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved to BIT[16-31] of the WATCHDOG_TCNT. [0]: http://linux-meson.com Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver") Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: pm8916_wdt: fix pretimeout registration flowJorge Ramirez-Ortiz
When an IRQ is present in the dts, the probe function shall fail if the interrupt can not be registered. The probe function shall also be retried if getting the irq is being deferred. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: cpwd: fix build regressionArnd Bergmann
The compat_ptr_ioctl() infrastructure did not make it into linux-5.4, so cpwd now fails to build. Fix it by using an open-coded version. Fixes: 68f28b01fb9e ("watchdog: cpwd: use generic compat_ptr_ioctl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-06nvme-multipath: fix crash in nvme_mpath_clear_ctrl_pathsAnton Eidelman
nvme_mpath_clear_ctrl_paths() iterates through the ctrl->namespaces list while holding ctrl->scan_lock. This does not seem to be the correct way of protecting from concurrent list modification. Specifically, nvme_scan_work() sorts ctrl->namespaces AFTER unlocking scan_lock. This may result in the following (rare) crash in ctrl disconnect during scan_work: BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core] ... Call Trace: nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core] nvme_remove_namespaces+0x35/0xe0 [nvme_core] nvme_do_delete_ctrl+0x47/0x90 [nvme_core] nvme_sysfs_delete+0x49/0x60 [nvme_core] dev_attr_store+0x17/0x30 sysfs_kf_write+0x3e/0x50 kernfs_fop_write+0x11e/0x1a0 __vfs_write+0x1b/0x40 vfs_write+0xb9/0x1a0 ksys_write+0x67/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x5a/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f8d02bfb154 Fix: After taking scan_lock in nvme_mpath_clear_ctrl_paths() down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe. This will not cause deadlocks because taking scan_lock never happens while holding the namespaces_rwsem. Moreover, scan work downs namespaces_rwsem in the same order. Alternative: sort ctrl->namespaces in nvme_scan_work() while still holding the scan_lock. This would leave nvme_mpath_clear_ctrl_paths() without correct protection against ctrl->namespaces modification by anyone other than scan_work. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-06nvme-rdma: fix a segmentation fault during module unloadMax Gurtovoy
In case there are controllers that are not associated with any RDMA device (e.g. during unsuccessful reconnection) and the user will unload the module, these controllers will not be freed and will access already freed memory. The same logic appears in other fabric drivers as well. Fixes: 87fd125344d6 ("nvme-rdma: remove redundant reference between ib_device and tagset") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-05clone3: validate stack argumentsChristian Brauner
Validate the stack arguments and setup the stack depening on whether or not it is growing down or up. Legacy clone() required userspace to know in which direction the stack is growing and pass down the stack pointer appropriately. To make things more confusing microblaze uses a variant of the clone() syscall selected by CONFIG_CLONE_BACKWARDS3 that takes an additional stack_size argument. IA64 has a separate clone2() syscall which also takes an additional stack_size argument. Finally, parisc has a stack that is growing upwards. Userspace therefore has a lot nasty code like the following: #define __STACK_SIZE (8 * 1024 * 1024) pid_t sys_clone(int (*fn)(void *), void *arg, int flags, int *pidfd) { pid_t ret; void *stack; stack = malloc(__STACK_SIZE); if (!stack) return -ENOMEM; #ifdef __ia64__ ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg, pidfd); #elif defined(__parisc__) /* stack grows up */ ret = clone(fn, stack, flags | SIGCHLD, arg, pidfd); #else ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg, pidfd); #endif return ret; } or even crazier variants such as [3]. With clone3() we have the ability to validate the stack. We can check that when stack_size is passed, the stack pointer is valid and the other way around. We can also check that the memory area userspace gave us is fine to use via access_ok(). Furthermore, we probably should not require userspace to know in which direction the stack is growing. It is easy for us to do this in the kernel and I couldn't find the original reasoning behind exposing this detail to userspace. /* Intentional user visible API change */ clone3() was released with 5.3. Currently, it is not documented and very unclear to userspace how the stack and stack_size argument have to be passed. After talking to glibc folks we concluded that trying to change clone3() to setup the stack instead of requiring userspace to do this is the right course of action. Note, that this is an explicit change in user visible behavior we introduce with this patch. If it breaks someone's use-case we will revert! (And then e.g. place the new behavior under an appropriate flag.) Breaking someone's use-case is very unlikely though. First, neither glibc nor musl currently expose a wrapper for clone3(). Second, there is no real motivation for anyone to use clone3() directly since it does not provide features that legacy clone doesn't. New features for clone3() will first happen in v5.5 which is why v5.4 is still a good time to try and make that change now and backport it to v5.3. Searches on [4] did not reveal any packages calling clone3(). [1]: https://lore.kernel.org/r/CAG48ez3q=BeNcuVTKBN79kJui4vC6nw0Bfq6xc-i0neheT17TA@mail.gmail.com [2]: https://lore.kernel.org/r/20191028172143.4vnnjpdljfnexaq5@wittgenstein [3]: https://github.com/systemd/systemd/blob/5238e9575906297608ff802a27e2ff9effa3b338/src/basic/raw-clone.h#L31 [4]: https://codesearch.debian.net Fixes: 7f192e3cd316 ("fork: add clone3") Cc: Kees Cook <keescook@chromium.org> Cc: Jann Horn <jannh@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Florian Weimer <fweimer@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-api@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # 5.3 Cc: GNU C Library <libc-alpha@sourceware.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Aleksa Sarai <cyphar@cyphar.com> Link: https://lore.kernel.org/r/20191031113608.20713-1-christian.brauner@ubuntu.com
2019-11-05ceph: don't allow copy_file_range when stripe_count != 1Luis Henriques
copy_file_range tries to use the OSD 'copy-from' operation, which simply performs a full object copy. Unfortunately, the implementation of this system call assumes that stripe_count is always set to 1 and doesn't take into account that the data may be striped across an object set. If the file layout has stripe_count different from 1, then the destination file data will be corrupted. For example: Consider a 8 MiB file with 4 MiB object size, stripe_count of 2 and stripe_size of 2 MiB; the first half of the file will be filled with 'A's and the second half will be filled with 'B's: 0 4M 8M Obj1 Obj2 +------+------+ +----+ +----+ file: | AAAA | BBBB | | AA | | AA | +------+------+ |----| |----| | BB | | BB | +----+ +----+ If we copy_file_range this file into a new file (which needs to have the same file layout!), then it will start by copying the object starting at file offset 0 (Obj1). And then it will copy the object starting at file offset 4M -- which is Obj1 again. Unfortunately, the solution for this is to not allow remote object copies to be performed when the file layout stripe_count is not 1 and simply fallback to the default (VFS) copy_file_range implementation. Cc: stable@vger.kernel.org Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-05ceph: don't try to handle hashed dentries in non-O_CREAT atomic_openJeff Layton
If ceph_atomic_open is handed a !d_in_lookup dentry, then that means that it already passed d_revalidate so we *know* that it's negative (or at least was very recently). Just return -ENOENT in that case. This also addresses a subtle bug in dentry handling. Non-O_CREAT opens call atomic_open with the parent's i_rwsem shared, but calling d_splice_alias on a hashed dentry requires the exclusive lock. If ceph_atomic_open receives a hashed, negative dentry on a non-O_CREAT open, and another client were to race in and create the file before we issue our OPEN, ceph_fill_trace could end up calling d_splice_alias on the dentry with the new inode with insufficient locks. Cc: stable@vger.kernel.org Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-05ALSA: hda/ca0132 - Fix possible workqueue stallTakashi Iwai
The unsolicited event handler for the headphone jack on CA0132 codec driver tries to reschedule the another delayed work with cancel_delayed_work_sync(). It's no good idea, unfortunately, especially after we changed the work queue to the standard global one; this may lead to a stall because both works are using the same global queue. Fix it by dropping the _sync but does call cancel_delayed_work() instead. Fixes: 993884f6a26c ("ALSA: hda/ca0132 - Delay HP amp turnon.") BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-05scripts/nsdeps: make sure to pass all module source files to spatchJessica Yu
The nsdeps script passes a list of the module source files to generate_deps_for_ns() as a space delimited string named $mod_source_files, which then passes it to spatch. But since $mod_source_files is not encased in quotes, each source file in that string is treated as a separate shell function argument (as $2, $3, $4, etc.). However, the spatch invocation only refers to $2, so only the first file out of $mod_source_files is processed by spatch. This causes problems (namely, the MODULE_IMPORT_NS() statement doesn't get inserted) when a module is composed of many source files and the "main" module file containing the MODULE_LICENSE() statement is not the first file listed in $mod_source_files. Fix this by encasing $mod_source_files in quotes so that the entirety of the string is treated as a single argument and can be referred to as $2. In addition, put quotes in the variable assignment of mod_source_files to prevent any shell interpretation and field splitting. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-11-05perf tools: Fix time sortingJiri Olsa
The final sort might get confused when the comparison is done over bigger numbers than int like for -s time. Check the following report for longer workloads: $ perf report -s time -F time,overhead --stdio Fix hist_entry__sort() to properly return int64_t and not possible cut int. Fixes: 043ca389a318 ("perf tools: Use hpp formats to sort final output") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org # v3.16+ Link: http://lore.kernel.org/lkml/20191104232711.16055-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-05can: don't use deprecated license identifiersYegor Yefremov
The "GPL-2.0" license identifier changed to "GPL-2.0-only" in SPDX v3.0. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-05can: mcp251x: mcp251x_restart_work_handler(): Fix potential force_quit race ↵Timo Schlüßler
condition In mcp251x_restart_work_handler() the variable to stop the interrupt handler (priv->force_quit) is reset after the chip is restarted and thus a interrupt might occur. This patch fixes the potential race condition by resetting force_quit before enabling interrupts. Signed-off-by: Timo Schlüßler <schluessler@krause.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-05perf tools: Remove unused trace_find_next_event()Steven Rostedt (VMware)
trace_find_next_event() was buggy and pretty much a useless helper. As there are no more users, just remove it. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20191017210636.224045576@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-05perf scripting engines: Iterate on tep event arrays directlySteven Rostedt (VMware)
Instead of calling a useless (and broken) helper function to get the next event of a tep event array, just get the array directly and iterate over it. Note, the broken part was from trace_find_next_event() which after this will no longer be used, and can be removed. Committer notes: This fixes a segfault when generating python scripts from perf.data files with multiple tracepoint events, i.e. the following use case is fixed by this patch: # perf record -e sched:* sleep 1 [ perf record: Woken up 31 times to write data ] [ perf record: Captured and wrote 0.031 MB perf.data (9 samples) ] # perf script -g python Segmentation fault (core dumped) # Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20191017153733.630cd5eb@gandalf.local.home Link: http://lore.kernel.org/lkml/20191017210636.061448713@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-05x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_earlyMichael Zhivich
The introduction of clocksource_tsc_early broke the functionality of "tsc=reliable" and "tsc=nowatchdog" command line parameters, since clocksource_tsc_early is unconditionally registered with CLOCK_SOURCE_MUST_VERIFY and thus put on the watchdog list. This can cause the TSC to be declared unstable during boot: clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc-early' as unstable because the skew is too large: clocksource: 'refined-jiffies' wd_now: fffb7018 wd_last: fffb6e9d mask: ffffffff clocksource: 'tsc-early' cs_now: 68a6a7070f6a0 cs_last: 68a69ab6f74d6 mask: ffffffffffffffff tsc: Marking TSC unstable due to clocksource watchdog The corresponding elapsed times are cs_nsec=1224152026 and wd_nsec=378942392, so the watchdog differs from TSC by 0.84 seconds. This happens when HPET is not available and jiffies are used as the TSC watchdog instead and the jiffies update is not happening due to lost timer interrupts in periodic mode, which can happen e.g. with expensive debug mechanisms enabled or under massive overload conditions in virtualized environments. Before the introduction of the early TSC clocksource the command line parameters "tsc=reliable" and "tsc=nowatchdog" could be used to work around this issue. Restore the behaviour by disabling the watchdog if requested on the kernel command line. [ tglx: Clarify changelog ] Fixes: aa83c45762a24 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191024175945.14338-1-mzhivich@akamai.com
2019-11-05x86/dumpstack/64: Don't evaluate exception stacks before setupThomas Gleixner
Cyrill reported the following crash: BUG: unable to handle page fault for address: 0000000000001ff0 #PF: supervisor read access in kernel mode RIP: 0010:get_stack_info+0xb3/0x148 It turns out that if the stack tracer is invoked before the exception stack mappings are initialized in_exception_stack() can erroneously classify an invalid address as an address inside of an exception stack: begin = this_cpu_read(cea_exception_stacks); <- 0 end = begin + sizeof(exception stacks); i.e. any address between 0 and end will be considered as exception stack address and the subsequent code will then try to derefence the resulting stack frame at a non mapped address. end = begin + (unsigned long)ep->size; ==> end = 0x2000 regs = (struct pt_regs *)end - 1; ==> regs = 0x2000 - sizeof(struct pt_regs *) = 0x1ff0 info->next_sp = (unsigned long *)regs->sp; ==> Crashes due to accessing 0x1ff0 Prevent this by checking the validity of the cea_exception_stack base address and bailing out if it is zero. Fixes: afcd21dad88b ("x86/dumpstack/64: Use cpu_entry_area instead of orig_ist") Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1910231950590.1852@nanos.tec.linutronix.de
2019-11-05irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentationYi Wang
A recent commit changed a parameter of __irq_domain_alloc_fwnode(), but did not update the documentation comment. Fix it up. Fixes: b977fcf477c1 ("irqdomain/debugfs: Use PAs to generate fwnode names") Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1571476047-29463-1-git-send-email-wang.yi59@zte.com.cn
2019-11-05x86/apic/32: Avoid bogus LDR warningsJan Beulich
The removal of the LDR initialization in the bigsmp_32 APIC code unearthed a problem in setup_local_APIC(). The code checks unconditionally for a mismatch of the logical APIC id by comparing the early APIC id which was initialized in get_smp_config() with the actual LDR value in the APIC. Due to the removal of the bogus LDR initialization the check now can trigger on bigsmp_32 APIC systems emitting a warning for every booting CPU. This is of course a false positive because the APIC is not using logical destination mode. Restrict the check and the possibly resulting fixup to systems which are actually using the APIC in logical destination mode. [ tglx: Massaged changelog and added Cc stable ] Fixes: bae3a8d3308 ("x86/apic: Do not initialize LDR and DFR for bigsmp") Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/666d8f91-b5a8-1afd-7add-821e72a35f03@suse.com
2019-11-04timekeeping/vsyscall: Update VDSO data unconditionallyHuacai Chen
The update of the VDSO data is depending on __arch_use_vsyscall() returning True. This is a leftover from the attempt to map the features of various architectures 1:1 into generic code. The usage of __arch_use_vsyscall() in the actual vsyscall implementations got dropped and replaced by the requirement for the architecture code to return U64_MAX if the global clocksource is not usable in the VDSO. But the __arch_use_vsyscall() check in the update code stayed which causes the VDSO data to be stale or invalid when an architecture actually implements that function and returns False when the current clocksource is not usable in the VDSO. As a consequence the VDSO implementations of clock_getres(), time(), clock_gettime(CLOCK_.*_COARSE) operate on invalid data and return bogus information. Remove the __arch_use_vsyscall() check from the VDSO update function and update the VDSO data unconditionally. [ tglx: Massaged changelog and removed the now useless implementations in asm-generic/ARM64/MIPS ] Fixes: 44f57d788e7deecb50 ("timekeeping: Provide a generic update_vsyscall() implementation") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1571887709-11447-1-git-send-email-chenhc@lemote.com
2019-11-04drm/i915/dp: Do not switch aux to TBT mode for non-TC portsJosé Roberto de Souza
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was switching aux to TBT mode for all combo-phy ports, happily this did not caused any issue but is better follow BSpec. Also this is reserved bit before ICL. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: e9b7e1422d40 ("drm/i915: Sanitize the terminology used for TypeC port modes") Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191029011014.286885-1-jose.souza@intel.com (cherry picked from commit 49748264826ff4cc7f0ebbdd6b0d1a36b13b1cee) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-04drm/i915: Avoid HPD poll detect triggering a new detect cycleImre Deak
For the HPD interrupt functionality the HW depends on power wells in the display core domain to be on. Accordingly when enabling these power wells the HPD polling logic will force an HPD detection cycle to account for hotplug events that may have happened when such a power well was off. Thus a detect cycle started by polling could start a new detect cycle if a power well in the display core domain gets enabled during detect and stays enabled after detect completes. That in turn can lead to a detection cycle runaway. To prevent re-triggering a poll-detect cycle make sure we drop all power references we acquired during detect synchronously by the end of detect. This will let the poll-detect logic continue with polling (matching the off state of the corresponding power wells) instead of scheduling a new detection cycle. Fixes: 6cfe7ec02e85 ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125 Reported-and-tested-by: Val Kulkov <val.kulkov@gmail.com> Reported-and-tested-by: wangqr <wqr.prg@gmail.com> Cc: Val Kulkov <val.kulkov@gmail.com> Cc: wangqr <wqr.prg@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191028181517.22602-1-imre.deak@intel.com (cherry picked from commit a8ddac7c9f06a12227a4f5febd1cbe0575a33179) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-04can: j1939: transport: j1939_xtp_rx_eoma_one(): Add sanity check for correct ↵Oleksij Rempel
total message size We were sending malformed EOMA with total message size set to 0. This issue has been fixed in the previous patch. In this patch a sanity check is added to the RX path and a error message is displayed. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: j1939: transport: j1939_session_fresh_new(): make sure EOMA is send ↵Oleksij Rempel
with the total message size set We were sending malformed EOMA messageswith total message size set to 0. This patch fixes the bug. Reported-by: https://github.com/linux-can/can-utils/issues/159 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: j1939: fix memory leak if filters was setOleksij Rempel
Filters array is coped from user space and linked to the j1939 socket. On socket release this memory was not freed. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: j1939: fix resource leak of skb on error return pathsColin Ian King
Currently the error return paths do not free skb and this results in a memory leak. Fix this by freeing them before the return. Addresses-Coverity: ("Resource leak") Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: add missing state changesJeroen Hofstee
While the ti_hecc has interrupts to report when the error counters increase to a certain level and which change state it doesn't handle the case that the error counters go down again, so the reported state can actually be wrong. Since there is no interrupt for that, do update state based on the error counters, when the state is not error active and goes down again. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: properly report state changesJeroen Hofstee
The HECC_CANES register handles the flags specially, it only updates the flags after a one is written to them. Since the interrupt for frame errors is not enabled an old error can hence been seen when a state interrupt arrives. For example if the device is not connected to the CAN-bus the error warning interrupt will have HECC_CANES indicating there is no ack. The error passive interrupt thereafter will have HECC_CANES flagging that there is a warning level. And if thereafter there is a message successfully send HECC_CANES points to an error passive event, while in reality it became error warning again. In summary, the state is not always reported correctly. So handle the state changes and frame errors separately. The state changes are now based on the interrupt flags and handled directly when they occur. The reporting of the frame errors is still done as before, as a side effect of another interrupt. note: the hecc_clear_bit will do a read, modify, write. So it will not only clear the bit, but also reset all other bits being set as a side affect, hence it is replaced with only clearing the flags. note: The HECC_CANMC_CCR is no longer cleared in the state change interrupt, it is completely unrelated. And use net_ratelimit to make checkpatch happy. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: add fifo overflow error reportingJeroen Hofstee
When the rx FIFO overflows the ti_hecc would silently drop them since the overwrite protection is enabled for all mailboxes. So disable it for the lowest priority mailbox and return a proper error value when receive message lost is set. Drop the message itself in that case, since it might be partially updated. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Acked-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: release the mailbox a bit earlierJeroen Hofstee
Release the mailbox after reading it, so it can be reused a bit earlier. Since "can: rx-offload: continue on error" all pending message bits are cleared directly, so remove clearing them in ti_hecc. Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: keep MIM and MD setJeroen Hofstee
The HECC_CANMIM is set in the xmit path and cleared in the interrupt. Since this is done with a read, modify, write action the register might end up with some more MIM enabled then intended, since it is not protected. That doesn't matter at all, since the tx interrupt disables the mailbox with HECC_CANME (while holding a spinlock). So lets just always keep MIM set. While at it, since the mailbox direction never changes, don't set it every time a message is send, ti_hecc_reset() already sets them to tx. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: ti_hecc_stop(): stop the CPK on downJeroen Hofstee
When the interface goes down, the CPK should no longer take an active part in the CAN-bus communication, like sending acks and error frames. So enable configuration mode in ti_hecc_stop, so the CPK is no longer active. When a transceiver switch is present the acks and errors don't make it to the bus, but disabling the CPK then does prevent oddities, like ti_hecc_reset() failing, since the CPK can become bus-off and starts counting the 11 bit recessive bits, which seems to block the reset. It can also cause invalid interrupts and disrupt the CAN-bus, since transmission can be stopped in the middle of a message, by disabling the tranceiver while the CPK is sending. Since the CPK is disabled after normal power on, it is typically only seen when the interface is restarted. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: ti_hecc: ti_hecc_error(): increase error counters if skb enqueueing via ↵Marc Kleine-Budde
can_rx_offload_queue_sorted() fails The call to can_rx_offload_queue_sorted() may fail and return an error (in the current implementation due to resource shortage). The passed skb is consumed. This patch adds incrementing of the appropriate error counters to let the device statistics reflect that there's a problem. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: flexcan: increase error counters if skb enqueueing via ↵Marc Kleine-Budde
can_rx_offload_queue_sorted() fails The call to can_rx_offload_queue_sorted() may fail and return an error (in the current implementation due to resource shortage). The passed skb is consumed. This patch adds incrementing of the appropriate error counters to let the device statistics reflect that there's a problem. Reported-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_irq_offload_fifo(): continue on errorMarc Kleine-Budde
In case of a resource shortage, i.e. the rx_offload queue will overflow or a skb fails to be allocated (due to OOM), can_rx_offload_offload_one() will call mailbox_read() to discard the mailbox and return an ERR_PTR. If the hardware FIFO is empty can_rx_offload_offload_one() will return NULL. In case a CAN frame was read from the hardware, can_rx_offload_offload_one() returns the skb containing it. Without this patch can_rx_offload_irq_offload_fifo() bails out if no skb returned, regardless of the reason. Similar to can_rx_offload_irq_offload_timestamp() in case of a resource shortage the whole FIFO should be discarded, to avoid an IRQ storm and give the system some time to recover. However if the FIFO is empty the loop can be left. With this patch the loop is left in case of empty FIFO, but not on errors. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_irq_offload_timestamp(): continue on errorJeroen Hofstee
In case of a resource shortage, i.e. the rx_offload queue will overflow or a skb fails to be allocated (due to OOM), can_rx_offload_offload_one() will call mailbox_read() to discard the mailbox and return an ERR_PTR. However can_rx_offload_irq_offload_timestamp() bails out in the error case. In case of a resource shortage all mailboxes should be discarded, to avoid an IRQ storm and give the system some time to recover. Since can_rx_offload_irq_offload_timestamp() is typically called from a while loop, all message will eventually be discarded. So let's continue on error instead to discard them directly. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_offload_one(): use ERR_PTR() to propagate ↵Marc Kleine-Budde
error value in case of errors Before this patch can_rx_offload_offload_one() returns a pointer to a skb containing the read CAN frame or a NULL pointer. However the meaning of the NULL pointer is ambiguous, it can either mean the requested mailbox is empty or there was an error. This patch fixes this situation by returning: - pointer to skb on success - NULL pointer if mailbox is empty - ERR_PTR() in case of an error All users of can_rx_offload_offload_one() have been adopted, no functional change intended. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_offload_one(): increment rx_fifo_errors on ↵Marc Kleine-Budde
queue overflow or OOM If the rx-offload skb_queue is full or the skb allocation fails (due to OOM), the mailbox contents is discarded. This patch adds the incrementing of the rx_fifo_errors statistics counter. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_offload_one(): do not increase the skb_queue ↵Marc Kleine-Budde
beyond skb_queue_len_max The skb_queue is a linked list, holding the skb to be processed in the next NAPI call. Without this patch, the queue length in can_rx_offload_offload_one() is limited to skb_queue_len_max + 1. As the skb_queue is a linked list, no array or other resources are accessed out-of-bound, however this behaviour is counterintuitive. This patch limits the rx-offload skb_queue length to skb_queue_len_max. Fixes: d254586c3453 ("can: rx-offload: Add support for HW fifo based irq offloading") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_queue_tail(): fix error handling, avoid skb ↵Marc Kleine-Budde
mem leak If the rx-offload skb_queue is full can_rx_offload_queue_tail() will not queue the skb and return with an error. This patch frees the skb in case of a full queue, which brings can_rx_offload_queue_tail() in line with the can_rx_offload_queue_sorted() function, which has been adjusted in the previous patch. The return value is adjusted to -ENOBUFS to better reflect the actual problem. The device stats handling is left to the caller. Fixes: d254586c3453 ("can: rx-offload: Add support for HW fifo based irq offloading") Reported-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid ↵Marc Kleine-Budde
skb mem leak If the rx-offload skb_queue is full can_rx_offload_queue_sorted() will not queue the skb and return with an error. None of the callers of this function, issue a kfree_skb() to free the not queued skb. This results in a memory leak. This patch fixes the problem by freeing the skb in case of a full queue. The return value is adjusted to -ENOBUFS to better reflect the actual problem. The device stats handling is left to the callers, as this function might be used in both the rx and tx path. Fixes: 55059f2b7f86 ("can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions") Cc: linux-stable <stable@vger.kernel.org> Cc: Martin Hundebøll <martin@geanix.com> Reported-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: xilinx_can: Fix flags field initialization for axi canAppana Durga Kedareswara rao
AXI CANIP doesn't support tx fifo empty interrupt feature(TXFEMP), update the flags filed in the driver for AXI CAN case accordingly. Fixes: 3281b380ec9f ("can: xilinx_can: Fix flags field initialization for axi can and canps") Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: c_can: C_CAN: add bus recovery eventsJeroen Hofstee
While the state is updated when the error counters increase and decrease, there is no event when the bus recovers and the error counters decrease again. So add that event as well. Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING -> ERROR_ACTIVE instead of directly to ERROR_ACTIVE again. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Tested-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: c_can: D_CAN: c_can_chip_config(): perform a sofware reset on openJeroen Hofstee
When the CAN interface is closed it the hardwre is put in power down mode, but does not reset the error counters / state. Reset the D_CAN on open, so the reported state and the actual state match. According to [1], the C_CAN module doesn't have the software reset. [1] http://www.bosch-semiconductors.com/media/ip_modules/pdf_2/c_can_fd8/users_manual_c_can_fd8_r210_1.pdf Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: c_can: c_can_poll(): only read status register after status IRQKurt Van Dijck
When the status register is read without the status IRQ pending, the chip may not raise the interrupt line for an upcoming status interrupt and the driver may miss a status interrupt. It is critical that the BUSOFF status interrupt is forwarded to the higher layers, since no more interrupts will follow without intervention. Thanks to Wolfgang and Joe for bringing up the first idea. Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Joe Burmeister <joe.burmeister@devtank.co.uk> Fixes: fa39b54ccf28 ("can: c_can: Get rid of pointless interrupts") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: peak_usb: report bus recovery as wellJeroen Hofstee
While the state changes are reported when the error counters increase and decrease, there is no event when the bus recovers and the error counters decrease again. So add those as well. Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING -> ERROR_ACTIVE instead of directly to ERROR_ACTIVE again. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: peak_usb: fix slab info leakJohan Hovold
Fix a small slab info leak due to a failure to clear the command buffer at allocation. The first 16 bytes of the command buffer are always sent to the device in pcan_usb_send_cmd() even though only the first two may have been initialised in case no argument payload is provided (e.g. when waiting for a response). Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Cc: stable <stable@vger.kernel.org> # 3.4 Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: peak_usb: fix a potential out-of-sync while decoding packetsStephane Grosjean
When decoding a buffer received from PCAN-USB, the first timestamp read in a packet is a 16-bit coded time base, and the next ones are an 8-bit offset to this base, regardless of the type of packet read. This patch corrects a potential loss of synchronization by using a timestamp index read from the buffer, rather than an index of received data packets, to determine on the sizeof the timestamp to be read from the packet being decoded. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Fixes: 46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: flexcan: disable completely the ECC mechanismJoakim Zhang
The ECC (memory error detection and correction) mechanism can be activated or not, controlled by the ECCDIS bit in CAN_MECR. When disabled, updates on indications and reporting registers are stopped. So if want to disable ECC completely, had better assert ECCDIS bit, not just mask the related interrupts. Fixes: cdce844865be ("can: flexcan: add vf610 support for FlexCAN") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:37:38 +0000