summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-18brcmfmac: set F2 blocksize and watermark for 4359Chung-Hsien Hsu
Set F2 blocksize to 256 bytes and watermark to 0x40 for 4359. Also enable and configure F1 MesBusyCtrl. It fixes DMA error while having UDP bi-directional traffic. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> [slightly adapted for rebase on mainline linux] Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: reset two D11 cores if chip has two D11 coresWright Feng
There are two D11 cores in RSDB chips like 4359. We have to reset two D11 cores simutaneously before firmware download, or the firmware may not be initialized correctly and cause "fw initialized failed" error. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: use generic rtl_signal_scale_mappingMichael Straube
Function _rtl92de_signal_scale_mapping is identical to the generic version rtl_signal_scale_mapping. Remove _rtl92de_signal_scale_mapping and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192cu: use generic rtl_signal_scale_mappingMichael Straube
Function _rtl92c_signal_scale_mapping is identical to the generic version rtl_signal_scale_mapping. Remove _rtl92c_signal_scale_mapping and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192ce: use generic rtl_signal_scale_mappingMichael Straube
Function _rtl92ce_signal_scale_mapping is identical to the generic version rtl_signal_scale_mapping. Remove _rtl92ce_signal_scale_mapping and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: use generic rtl_query_rxpwrpercentageMichael Straube
Function _rtl92d_query_rxpwrpercentage is identical to the generic version rtl_query_rxpwrpercentage. Remove _rtl92d_query_rxpwrpercentage and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192cu: use generic rtl_query_rxpwrpercentageMichael Straube
Function _rtl92c_query_rxpwrpercentage is identical to the generic version rtl_query_rxpwrpercentage. Remove _rtl92c_query_rxpwrpercentage and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192ce: use generic rtl_query_rxpwrpercentageMichael Straube
Function _rtl92c_query_rxpwrpercentage is identical to the generic version rtl_query_rxpwrpercentage. Remove _rtl92c_query_rxpwrpercentage and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18zd1211rw: fix storage endpoint lookupJohan Hovold
Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: a1030e92c150 ("[PATCH] zd1211rw: Convert installer CDROM device into WLAN device") Cc: stable <stable@vger.kernel.org> # 2.6.19 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi_91x_usb: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtl8xxxu: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Cc: stable <stable@vger.kernel.org> # 4.4 Cc: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18orinoco_usb: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 9afac70a7305 ("orinoco: add orinoco_usb driver") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Cc: stable <stable@vger.kernel.org> # 3.4 Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18at76c50x-usb: fix endpoint debug messageJohan Hovold
Make sure to use the current alternate setting, which may not be the same as the first alternate setting, also when printing the number of endpoints at probe. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: set interface carrier to off by defaultRafał Miłecki
It's important as brcmfmac creates one main interface for each PHY and doesn't allow deleting it. Not setting carrier could result in other subsystems misbehaving (e.g. LEDs "netdev" trigger turning LED on). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18mwifiex: delete unused mwifiex_get_intf_num()Brian Norris
Commit 7afb94da3cd8 ("mwifiex: update set_mac_address logic") fixed the only user of this function, partly because the author seems to have noticed that, as written, it's on the borderline between highly misleading and buggy. Anyway, no sense in keeping dead code around: let's drop it. Fixes: 7afb94da3cd8 ("mwifiex: update set_mac_address logic") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18MAINTAINERS: update Ganapathi Bhat's email addressGanapathi Bhat
I'd like to use this email-id from now on. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rt2x00usb: Fix a warning message in 'rt2x00usb_watchdog_tx_dma()'Christophe JAILLET
'forced' is duplicated in the message, axe one of them. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: Fix use after free in brcmf_sdio_readframes()Dan Carpenter
The brcmu_pkt_buf_free_skb() function frees "pkt" so it leads to a static checker warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1974 brcmf_sdio_readframes() error: dereferencing freed memory 'pkt' It looks like there was supposed to be a continue after we free "pkt". Fixes: 4754fceeb9a6 ("brcmfmac: streamline SDIO read frame routine") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: add missing endpoint sanity checksJohan Hovold
The driver expects at least one bulk-in endpoint when in "wifi-alone" operating mode and two bulk-in endpoints otherwise, and would otherwise fail to to submit the corresponding bulk URB to the default pipe during probe with a somewhat cryptic message: rsi_91x: rsi_rx_urb_submit: Failed in urb submission rsi_91x: rsi_probe: Failed in probe...Exiting RSI-USB WLAN: probe of 2-2.4:1.0 failed with error -8 The current endpoint sanity check looks broken and would only bail out early if there was no bulk-in endpoint but at least one bulk-out endpoint. Tighten this check to always require at least one bulk-in and one bulk-out endpoint, and add the missing sanity check for a Bluetooth bulk-in endpoint when in a BT operating mode. Also make sure to log an informative error message when the expected endpoints are missing. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix non-atomic allocation in completion handlerJohan Hovold
USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface") Cc: stable <stable@vger.kernel.org> # 4.17 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix memory leak on failed URB submissionJohan Hovold
Make sure to free the skb on failed receive-URB submission (e.g. on disconnect or currently also due to a missing endpoint). Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface") Cc: stable <stable@vger.kernel.org> # 4.17 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix use-after-free on probe errorsJohan Hovold
The driver would fail to stop the command timer in most error paths, something which specifically could lead to the timer being freed while still active on I/O errors during probe. Fix this by making sure that each function starting the timer also stops it in all relevant error paths. Reported-by: syzbot+1d1597a5aa3679c65b9f@syzkaller.appspotmail.com Fixes: b78e91bcfb33 ("rsi: Add new firmware loading method") Cc: stable <stable@vger.kernel.org> # 4.12 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix use-after-free on failed probe and unbindJohan Hovold
Make sure to stop both URBs before returning after failed probe as well as on disconnect to avoid use-after-free in the completion handler. Reported-by: syzbot+b563b7f8dbe8223a51e8@syzkaller.appspotmail.com Fixes: a4302bff28e2 ("rsi: add bluetooth rx endpoint") Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rt2x00: use RESET state bit to prevent IV changes on restartStanislaw Gruszka
We can not set IV when we are under reset. Previously we read previous IV value from registers and zeroed IV registers when key was deleted, but this could possibly not work if DEL_KEY command was not performed. Now when we have ->reconfig_complete ops and we fully mark mac80211 reset state via DEVICE_STATE_RESET flag, we can just skip setting IV when keys are set during reset. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rt2x00: implement reconfig_completeStanislaw Gruszka
mac80211 has .reconfig_complete that can be used as indicator of HW restart end. This will allow to configure keys/IV differently for HW restart and normal configuration. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18bcma: remove set but not used variable 'sizel'yu kuai
Fixes gcc '-Wunused-but-set-variable' warning: drivers/bcma/scan.c: In function ‘bcma_erom_get_addr_desc’: drivers/bcma/scan.c:222:20: warning: variable ‘sizel’ set but not used [-Wunused-but-set-variable] It is never used, and so can be removed. Fixes: 8369ae33b705 ("bcma: add Broadcom specific AMBA bus driver") Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl_pci: Fix -Wcast-function-typePhong Tran
correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20 Signed-off-by: Phong Tran <tranmanphong@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18iwlegacy: Fix -Wcast-function-typePhong Tran
correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20 Signed-off-by: Phong Tran <tranmanphong@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18ipw2x00: Fix -Wcast-function-typePhong Tran
correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20 Signed-off-by: Phong Tran <tranmanphong@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18b43legacy: Fix -Wcast-function-typePhong Tran
correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20 Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Phong Tran <tranmanphong@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmsmac: Remove always false 'channel < 0' statementAustin Kim
As 'channel' is declared as u16, the following expression is always false. channel < 0 So we can remove unnecessary 'always false' statement. Signed-off-by: Austin Kim <austindh.kim@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18usb: xhci: Fix build warning seen with CONFIG_PM=nGuenter Roeck
The following build warning is seen if CONFIG_PM is disabled. drivers/usb/host/xhci-pci.c:498:13: warning: unused function 'xhci_pci_shutdown' Fixes: f2c710f7dca8 ("usb: xhci: only set D3hot for pci device") Cc: Henry Lin <henryl@nvidia.com> Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18rtlwifi: Remove last definitions of local bit manipulation macrosLarry Finger
All usage of the local macros have been removed, thus the remaining definitions are deleted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8723be: Remove usage of private bit manipulation macrosLarry Finger
Besides the previously changed macros for the RX and TX descriptors. the local macros are used in other places. These are replaced with standard bit manipulation macros. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8723ae: Remove usage of private bit manipulation macrosLarry Finger
Besides the previously changed macros for the RX and TX descriptors. the local macros are used in other places. These are replaced with standard bit manipulation macros. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192ee: Remove usage of private bit manipulation macrosLarry Finger
Besides the previously changed macros for the RX and TX descriptors. the local macros are used in other places. These are replaced with standard bit manipulation macros. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl88821ae: Remove usage of private bit manipulation macrosLarry Finger
Besides the previously changed macros for the RX and TX descriptors. the local macros are used in other places. These are replaced with standard bit manipulation macros. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: Remove dependence on special bit manipulation macros for common driverLarry Finger
The special macros are used in several places in the base driver. These are replaced by standard bit manipulation macros or code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192ce: rtl8192c_com: Remove usage of private bit manipulation ↵Larry Finger
macros Besides the previously changes macros for the RX and TX descriptors. the local macros are used in other places. These are replaced with standard bit manipulation macros. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8188ee: Remove usage of private bit manipulationLarry Finger
Besides the previously changes macros for the RX and TX descriptors. the local macros are used in other places. These are replaced with standard bit manipulation macros. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: Remove usage of private bit manipulation macrosLarry Finger
Besides the previously changes macros in trx.h, there are some of these local macros in the driver. These are replaced with standard bit manipulations. Unused macros are deleted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: Convert inline routines to little-endian wordsLarry Finger
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: Convert macros that set descriptorLarry Finger
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl complains about a space after a cast and other warnings are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: Replace local bit manipulation macrosLarry Finger
This driver uses a set of local macros to manipulate the RX and TX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: Remove unused GET_XXX and SET_XXX macrosLarry Finger
As the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18brcmfmac: Fix memory leak in brcmf_p2p_create_p2pdev()Navid Emamdoost
In the implementation of brcmf_p2p_create_p2pdev() the allocated memory for p2p_vif is leaked when the mac address is the same as primary interface. To fix this, go to error path to release p2p_vif via brcmf_free_vif(). Fixes: cb746e47837a ("brcmfmac: check p2pdev mac address uniqueness") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18clk: Move clk_core_reparent_orphans() under CONFIG_OFOlof Johansson
A recent addition exposed a helper that is only used for CONFIG_OF. Move it into the CONFIG_OF zone in this file to make the compiler stop warning about an unused function. Fixes: 66d9506440bb ("clk: walk orphan list on clock provider registration") Signed-off-by: Olof Johansson <olof@lixom.net> Link: https://lkml.kernel.org/r/20191217082501.424892072D@mail.kernel.org [sboyd@kernel.org: "Simply" move the function instead] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18wcn36xx: disable HW_CONNECTION_MONITOREduardo Abinader
Whenever the signal stregth decays smoothly and physical connnection is already gone and no deauth has arrived, the qcom soc is not able to indicate neither WCN36XX_HAL_MISSED_BEACON_IND nor WCN36XX_HAL_MISSED_BEACON_IND. It was noticed that such situation gets even more reproducible, when the driver fails to enter bmps mode - which is highly likely to occur. Thus, in order to provide proper disconnection of the connected STA, let mac80211 handle it, instead of wcn3xx driver. Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18ath9k: fix storage endpoint lookupJohan Hovold
Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices") Cc: stable <stable@vger.kernel.org> # 2.6.39 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 15:43:28 +0000