| Age | Commit message (Collapse) | Author |
|---|
|
Watchdog updates from Wim Van Sebroeck:
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: fix GETTIMEOUT ioctl in booke_wdt
watchdog: update maintainers git entry
watchdog: Fix typo in pnx4008_wdt.c
watchdog: Fix typo in Kconfig
watchdog: fix error in probe() of s3c2410_wdt (reset at booting)
watchdog: hpwdt: clean up set_memory_x call for 32 bit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull from Mark Brown:
"A simple, driver specific fix. This device isn't widely used outside
of Marvell reference boards most of which are probably used with their
BSPs rather than with mainline so low risk."
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fix the ldo configure according to 88pm860x spec
|
|
git://git.pengutronix.de/git/wsa/linux-2.6
i2c bugfix from Wolfram Sang:
"This patch fixes a wrong assumption in the mxs-i2c-driver about a
command queue being done. Without it, we have seen races when the
bus was under load."
* 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6:
i2c: mxs: only flag completion when queue is completely done
|
|
DRM fixes from Dave Airlie:
intel: fixes for output regression on 965GM, an oops and a machine
hang
radeon: uninitialised var (that gcc didn't warn about for some reason)
+ a couple of correctness fixes.
exynos: fixes for various things, drop some chunks of unused code.
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv()
drm/radeon: fix uninitialized variable
drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2)
drm/i915: Remove use of the autoreported ringbuffer HEAD position
drm/i915: Prevent a machine hang by checking crtc->active before loading lut
drm/i915: fix operator precedence when enabling RC6p
drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0
drm/i915: fix mode set on load pipe. (v2)
drm/exynos: exynos_drm.h header file fixes
drm/exynos: added panel physical size.
drm/exynos: added postclose to release resource.
drm/exynos: removed exynos_drm_fbdev_recreate function.
drm/exynos: fixed page flip issue.
drm/exynos: added possible_clones setup function.
drm/exynos: removed pageflip_event_list init code when closed.
drm/exynos: changed priority of mixer layers.
drm/exynos: Fix typo in exynos_mixer.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
[S390] memory hotplug: prevent memory zone interleave
[S390] crash_dump: remove duplicate include
[S390] KEYS: Enable the compat keyctl wrapper on s390x
|
|
Merge virtio pull request from Rusty Russell.
* tag 'for-linus' of git://github.com/rustyrussell/linux:
virtio: balloon: leak / fill balloon across S4
|
|
commit e562966dbaf49e7804097cd991e5d3a8934fc148 added support for S4 to
the balloon driver. The freeze function did nothing to free the pages,
since reclaiming the pages from the host to immediately give them back
(if S4 was successful) seemed wasteful. Also, if S4 wasn't successful,
the guest would have to re-fill the balloon. On restore, the pages were
supposed to be marked freed and the free page counters were incremented
to reflect the balloon was totally deflated.
However, this wasn't done right. The pages that were earlier taken away
from the guest during a balloon inflation operation were just shown as
used pages after a successful restore from S4. Just a fancy way of
leaking lots of memory.
Instead of trying that, just leak the balloon on freeze and fill it on
restore/thaw paths. This works properly now. The optimisation to not
leak can be added later on after a bit of refactoring of the code.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Arnd Bergmann says:
"Another set of arm-soc bug fixes on top of v3.3-rc5. The few larger
bits are all for devices that still need to get set up in board code.
Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx."
* tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
ARM: LPC32xx: serial.c: Fixed loop limit
ARM: LPC32xx: serial.c: HW bug workaround
ARM: LPC32xx: irq.c: Clear latched event
ARM: LPC32xx: Fix interrupt controller init
ARM: LPC32xx: Fix irq on GPI_28
ARM: OMAP2: fix mailbox init code
ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
ARM: OMAP1: Fix out-of-bounds array access for Innovator
OMAP3 EVM: remove out-of-bounds array access of gpio_leds
ARM: OMAP: Fix build error when mmc_omap is built as module
ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module
pxa/hx4700: add platform device and I2C info for AK4641 codec
arch/arm/mach-pxa/: included linux/gpio.h twice
arch/arm/mach-mmp/: some files include some headers twice
ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
ARM: pxa: fix including linux/gpio.h twice
ARM: pxa: fix mixed declarations and code in sharpsl_pm
ARM: pxa: fix wrong parsing gpio event on spitz
ARM: OMAP2+: usb-host: fix compile warning
ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback
...
|
|
Build fixes for 3.3 from Jonas Bonn
* tag 'for-3.3' of git://openrisc.net/jonas/linux:
openrisc: Fix up audit_syscall_[entry|exit]() usage
openrisc: include export.h for EXPORT_SYMBOL
|
|
The bo is removed from the list at the top of
radeon_vm_bo_rmv(), but then the list is used
in radeon_vm_bo_update_pte() to look up the vm.
remove the bo_list entry at the end of the
function instead.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Without this fix the driver randomly treats
textures as arrays and I'm really wondering
why gcc isn't complaining about it.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.infradead.org/users/kmpark/linux-2.6-samsung into HEAD
* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6-samsung:
drm/exynos: exynos_drm.h header file fixes
drm/exynos: added panel physical size.
drm/exynos: added postclose to release resource.
drm/exynos: removed exynos_drm_fbdev_recreate function.
drm/exynos: fixed page flip issue.
drm/exynos: added possible_clones setup function.
drm/exynos: removed pageflip_event_list init code when closed.
drm/exynos: changed priority of mixer layers.
drm/exynos: Fix typo in exynos_mixer.c
|
|
Need to call ExternalEncoderControl to set up DDC before
trying to get an EDID for all DP bridge chips (including
DP to LVDS).
Also remove redundant encoder assignment.
V2: fix typo in commit message.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Commit dcfb748422 ([WATCHDOG] fix book E watchdog to take
WDIOC_SETTIMEOUT arg in seconds) fixed SETTIMEOUT ioctl
to use seconds as a parameter instead of some hardware-specific
"period", but missed to apply similar changes to GETTIMEOUT,
so it still returns "period" value. Let's fix it!
Also, while at it, make SETTIMEOUT ioctl return real timeout
value as it should do according to the documentation.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Fix printk format warning (from Linus's suggestion):
on i386:
fs/ecryptfs/miscdev.c:433:38: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'
and on x86_64:
fs/ecryptfs/miscdev.c:433:38: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'long unsigned int'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Dustin Kirkland <dustin.kirkland@gazzang.com>
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
GFS2: Read resource groups on mount
GFS2: Ensure rindex is uptodate for fallocate
GFS2: Read in rindex if necessary during unlink
GFS2: Fix race between lru_list and glock ref count
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
IOMMU fixes for Linux 3.3-rc5
All the fixes are for the OMAP IOMMU driver. The first patch is the
biggest one. It fixes the calls of the function omap_find_iovm_area() in
the omap-iommu-debug module which expects a 'struct device' parameter
since commit fabdbca instead of an omap_iommu handle. The
omap-iommu-debug code still passed the handle to the function which
caused a crash.
The second patch fixes a NULL pointer dereference in the OMAP code and
the third patch makes sure that the omap-iommu is initialized before the
omap-isp driver, which relies on the iommu. The last patch is only a
workaround until defered probing is implemented.
* tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
iommu/omap: fix NULL pointer dereference
iommu/omap: fix erroneous omap-iommu-debug API calls
|
|
The git repository for watchdog device drivers moved.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Correct spelling "resouce" to "resource" in
drivers/watchdog/pnx4008_wdt.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Correct spelling "overidden" to "overridden" in
drivers/watchdog/Kconfig
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Probe function of s3c2410 watchdog calls request_irq before initializing
required value (wdt_count). This incurs resetting watchdog counter value
and watchdog-reboot during booting up.
This patch addresses such an issue by calling request_irq later.
Error handling in probe function and calling oder in remove function are
also revised accordingly.
Reported-by: Chanwoo Park <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
1. address has to be page aligned.
2. set_memory_x uses page size argument, not size.
Bug causes with following commit:
commit da28179b4e90dda56912ee825c7eaa62fc103797
Author: Mingarelli, Thomas <Thomas.Mingarelli@hp.com>
Date: Mon Nov 7 10:59:00 2011 +0100
watchdog: hpwdt: Changes to handle NX secure bit in 32bit path
commit e67d668e147c3b4fec638c9e0ace04319f5ceccd upstream.
This patch makes use of the set_memory_x() kernel API in order
to make necessary BIOS calls to source NMIs.
Signed-off-by: Maxim Uvarov <maxim.uvarov@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>
|
|
This makes mount take slightly longer, but at the same time, the first
write to the filesystem will be faster too. It also means that if there
is a problem in the resource index, then we can refuse to mount rather
than having to try and report that when the first write occurs.
In addition, to avoid recursive locking, we hvae to take account of
instances when the rindex glock may already be held when we are
trying to update the rbtree of resource groups.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes a problem whereby gfs2_grow was failing and causing GFS2
to assert. The problem was that when GFS2's fallocate operation tried to
acquire an "allocation" it made sure the rindex was up to date, and if not,
it called gfs2_rindex_update. However, if the file being fallocated was
the rindex itself, it was already locked at that point. By calling
gfs2_rindex_update at an earlier point in time, we bring rindex up to date
and thereby avoid trying to lock it when the "allocation" is acquired.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes a problem whereby you were unable to delete
files until other file system operations were done (such as
statfs, touch, writes, etc.) that caused the rindex to be
read in.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes a narrow race window between the glock ref count
hitting zero and glocks being removed from the lru_list.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel into HEAD
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel:
drm/i915: Remove use of the autoreported ringbuffer HEAD position
drm/i915: Prevent a machine hang by checking crtc->active before loading lut
drm/i915: fix operator precedence when enabling RC6p
drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0
drm/i915: fix mode set on load pipe. (v2)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
While demoing ktest at ELC in 2012, it was embarrassing that the
make_min_config test failed to work because the snowball board I was
testing it against had a config that would not build. But the
make_min_config only tested the testing part and ignored build failures.
The end result was a config file that would not boot.
This time, for real.
* tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix make_min_config test when build fails
|
|
The make_min_config does not take into account when the build fails,
resulting in a invalid MIN_CONFIG .config file. When the build fails,
it is ignored and the boot test is executed, using the previous built
kernel. The configs that should be tested are not tested and they may
be added or removed depending on the result of the last kernel that
succeeded to be built.
If the build fails, mark the current config as a failure and the
configs that were disabled may still be needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
* 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6: (5 commits)
ARM: LPC32xx: serial.c: Fixed loop limit
ARM: LPC32xx: serial.c: HW bug workaround
ARM: LPC32xx: irq.c: Clear latched event
ARM: LPC32xx: Fix interrupt controller init
ARM: LPC32xx: Fix irq on GPI_28
Update to Linux 3.3-rc5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is a revert of 6aa56062eaba67adfb247cded244fd877329588d.
This was originally introduced to workaround reads of the ringbuffer
registers returning 0 on SandyBridge causing hangs due to ringbuffer
overflow. The root cause here was reads through the GT powerwell require
the forcewake dance, something we only learnt of later. Now it appears
that reading the reported head position from the HWS is returning
garbage, leading once again to hangs.
For example, on q35 the autoreported head reports:
[ 217.975608] head now 00010000, actual 00010000
[ 436.725613] head now 00200000, actual 00200000
[ 462.956033] head now 00210000, actual 00210010
[ 485.501409] head now 00400000, actual 00400020
[ 508.064280] head now 00410000, actual 00410000
[ 530.576078] head now 00600000, actual 00600020
[ 553.273489] head now 00610000, actual 00610018
which appears reasonably sane. In contrast, if we look at snb:
[ 141.970680] head now 00e10000, actual 00008238
[ 141.974062] head now 02734000, actual 000083c8
[ 141.974425] head now 00e10000, actual 00008488
[ 141.980374] head now 032b5000, actual 000088b8
[ 141.980885] head now 03271000, actual 00008950
[ 142.040628] head now 02101000, actual 00008b40
[ 142.180173] head now 02734000, actual 00009050
[ 142.181090] head now 00000000, actual 00000ae0
[ 142.183737] head now 02734000, actual 00009050
In addition, the automatic reporting of the head position is scheduled
to be defeatured in the future. It has no more utility, remove it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45492
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
This patch fixes a wrong loop limit on UART init.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
|
|
This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was
ported from NXP's git.lpclinux.com tree.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
|
|
This patch fixes the wakeup disable function by clearing latched events.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
|
|
This patch fixes the initialization of the interrupt controller of the LPC32xx
by correctly setting up SIC1 and SIC2 instead of (wrongly) using the same value
as for the Main Interrupt Controller (MIC).
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
|
|
The GPI_28 IRQ was not registered properly. The registration of
IRQ_LPC32XX_GPI_28 was added and the (wrong) IRQ_LPC32XX_GPI_11 at
LPC32XX_SIC1_IRQ(4) was replaced by IRQ_LPC32XX_GPI_28 (see manual of
LPC32xx / interrupt controller).
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org
|
|
Here are some trivial NTFS changes (a spelling fix and two use before
NULL check cases found by Coverity as well as an update in MAINTAINERS
for the path to the ntfs git repo) together with a simple LDM fix for
parsing fragmented VBLKs.
* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs:
NTFS: Update git repo path in MAINTAINERS file.
LDM: Fix reassembly of extended VBLKs.
NTFS: Correct two spelling errors "dealocate" to "deallocate" in mft.c.
NTFS: Do not dereference pointer before checking for NULL.
NTFS: Remove unused variable.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/AMD: Fix UP build error
x86: Specify a size for the cmp in the NMI handler
x86/nmi: Test saved %cs in NMI to determine nested NMI case
x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h processors
x86/microcode: Remove noisy AMD microcode warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/events: Revert trace_sched_stat_sleeptime()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Handle pending irqs in irq_startup()
genirq: Unmask oneshot irqs when thread was not woken
|
|
The new is_compat_task() define for the !COMPAT case in
include/linux/compat.h conflicts with a similar define in
arch/s390/include/asm/compat.h.
This is the minimal patch which fixes the build issues.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
|
|
omap3isp depends on omap's iommu and will fail to probe if
initialized before it (which always happen if they are builtin).
Make omap's iommu subsys_initcall as an interim solution until
the probe deferral mechanism is merged.
Reported-by: James <angweiyang@gmail.com>
Debugged-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: stable <stable@vger.kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Two fixes to fix a memory corruption bug when WC pages never get
converted back to WB but end up being recycled in the general memory
pool as WC.
There is a better way of fixing this, but there is not enough time to do
the full benchmarking to pick one of the right options - so picking the
one that favors stability for right now.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* tag 'stable/for-linus-fixes-3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/pat: Disable PAT support for now.
xen/setup: Remove redundant filtering of PTE masks.
|
|
* tag 'for-linus' of git://github.com/rustyrussell/linux:
mod/file2alias: make modpost compile on darwin again
|
|
The autofs mailing list has moved to vger.kernel.org.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit e49ce14150c64b29a8dd211df785576fa19a9858 breaks cross compiling
the linux kernel on darwin hosts.
This fix introduce some minimal glue to adopt linker section handling
for darwin hosts.
Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Jochen Friedrich <jochen@scram.de>
CC: Samuel Ortiz <sameo@linux.intel.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Bernhard Walle <bernhard@bwalle.de>
|
|
1) ICMP sockets leave err uninitialized but we try to return it for the
unsupported MSG_OOB case, reported by Dave Jones.
2) Add new Zaurus device ID entries, from Dave Jones.
3) Pointer calculation in hso driver memset is wrong, from Dan
Carpenter.
4) ks8851_probe() checks unsigned value as negative, fix also from Dan
Carpenter.
5) Fix crashes in atl1c driver due to TX queue handling, from Eric
Dumazet. I anticipate some TX side locking fixes coming in the near
future for this driver as well.
6) The inline directive fix in Bluetooth which was breaking the build
only with very new versions of GCC, from Johan Hedberg.
7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge
window, reported by Meelis Roos and fixed by Eric Dumazet.
8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng.
9) Some ip6_route_output() callers test the return value for NULL, but
this never happens as the convention is to return a dst entry with
dst->error set. Fixes from RonQing Li.
10) Logitech Harmony 900 should be handled by zaurus driver not
cdc_ether, update white lists and black lists accordingly. From
Scott Talbert.
11) Receiving from certain kinds of devices there won't be a MAC header,
so there is no MAC header to fixup in the IPSEC code, and if we try
to do it we'll crash. Fix from Eric Dumazet.
12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny
Petrilin.
13) Fix regression in link-down handling in davinci_emac which causes
all RX descriptors to be freed up and therefore RX to wedge
completely, from Christian Riesch.
14) It took two attempts, but ctnetlink soft lockups seem to be
cured now, from Pablo Neira Ayuso.
15) Endianness bug fix in ENIC driver, from Santosh Nayak.
16) The long ago conversion of the PPP fragmentation code over to
abstracted SKB list handling wasn't perfect, once we get an
out of sequence SKB we don't flush the rest of them like we
should. From Ben McKeegan.
17) Fix regression of ->ip_summed initialization in sfc driver.
From Ben Hutchings.
18) Bluetooth timeout mistakenly using msecs instead of jiffies,
from Andrzej Kaczmarek.
19) Using _sync variant of work cancellation results in deadlocks,
use the non _sync variants instead. From Andre Guedes.
20) Bluetooth rfcomm code had reference counting problems leading
to crashes, fix from Octavian Purdila.
21) The conversion of netem over to classful qdisc handling added
two bugs to netem_dequeue(), fixes from Eric Dumazet.
22) Missing pci_iounmap() in ATM Solos driver. Fix from Julia Lawall.
23) b44_pci_exit() should not have __exit tag since it's invoked from
non-__exit code. From Nikola Pajkovsky.
24) The conversion of the neighbour hash tables over to RCU added a
race, fixed here by adding the necessary reread of tbl->nht, fix
from Michel Machado.
25) When we added VF (virtual function) attributes for network device
dumps, this potentially bloats up the size of the dump of one
network device such that the dump size is too large for the buffer
allocated by properly written netlink applications.
In particular, if you add 255 VFs to a network device, parts of
GLIBC stop working.
To fix this, we add an attribute that is used to turn on these
extended portions of the network device dump. Sophisticaed
applications like 'ip' that want to see this stuff will be changed
to set the attribute, whereas things like GLIBC that don't care
about VFs simply will not, and therefore won't be busted by the
mere presence of VFs on a network device.
Thanks to the tireless work of Greg Rose on this fix.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
sfc: Fix assignment of ip_summed for pre-allocated skbs
ppp: fix 'ppp_mp_reconstruct bad seq' errors
enic: Fix endianness bug.
gre: fix spelling in comments
netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)
Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries"
davinci_emac: Do not free all rx dma descriptors during init
mlx4_core: Fixing array indexes when setting port types
phy: IC+101G and PHY_HAS_INTERRUPT flag
netdev/phy/icplus: Correct broken phy_init code
ipsec: be careful of non existing mac headers
Move Logitech Harmony 900 from cdc_ether to zaurus
hso: memsetting wrong data in hso_get_count()
netfilter: ip6_route_output() never returns NULL.
ethernet/broadcom: ip6_route_output() never returns NULL.
ipv6: ip6_route_output() never returns NULL.
jme: Fix FIFO flush issue
atm: clip: remove clip_tbl
ipv4: ping: Fix recvmsg MSG_OOB error handling.
rtnetlink: Fix problem with buffer allocation
...
|
