| Age | Commit message (Collapse) | Author |
|---|
|
Add tests verifying prefix routes are inserted with expected metric.
IPv6 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv4 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for IFA_RT_PRIORITY to ipv6 addresses.
If the metric is changed on an existing address then the new route
is inserted before removing the old one. Since the metric is one
of the route keys, the prefix route can not be atomically replaced.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for IFA_RT_PRIORITY to ipv4 addresses.
If the metric is changed on an existing address then the new route
is inserted before removing the old one. Since the metric is one
of the route keys, the prefix route can not be replaced.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, if two interfaces have addresses in the same connected route,
then the order of the prefix route entries is determined by the order in
which the addresses are assigned or the links brought up.
Add IFA_RT_PRIORITY to allow user to specify the metric of the prefix
route associated with an address giving interface managers better
control of the order of prefix routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update inet6_addr_modify to take ifa6_config argument versus a parameter
list. This is an argument move only; no functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the creation of struct ifa6_config up to callers of inet6_addr_add.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move config parameters for adding an ipv6 address to a struct. struct
names stem from inet6_rtm_newaddr which is the modern handler for
adding an address.
Start the conversion to ifa6_config with ipv6_add_addr. This is an argument
move only; no functional change intended. Mapping of variable changes:
addr --> cfg->pfx
peer_addr --> cfg->peer_pfx
pfxlen --> cfg->plen
flags --> cfg->ifa_flags
scope, valid_lft, prefered_lft have the same names within cfg
(with corrected spelling).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
mlxsw: use MRSR register for FW reset
Jiri says:
Introduce a MRSR register definition and use it to do FW reset instead
of existing mechanism using PCI BAR0 register.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far, the PCI BAR0 register is used for triggering FW reset. However,
that is a legacy attitude and it is recommended to use MRSR to perform
reset instead. So do that. Move the reset into init() function as
the cmd interface needs to be used. With that, IRQ initialization needs
to be moved as well. As a side effect, the reset move simplifies
the devlink reload flow.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is an exception in command interface processing in case the MRSR
register is written to. The register triggers FW reset and during the
reset FW returns an error. So handle this by ignoring this error while
writing to MRSR register.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VLAN 1 is internally used for untagged traffic. Prevent creation of
explicit netdevice for that VLAN, because that currently isn't supported
and leads to the NULL pointer dereference cited below.
Fix by preventing creation of VLAN devices with VID of 1 over mlxsw
devices or LAG devices that involve mlxsw devices.
[ 327.175816] ================================================================================
[ 327.184544] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c:200:12
[ 327.193667] member access within null pointer of type 'const struct mlxsw_sp_fid'
[ 327.201226] CPU: 0 PID: 8983 Comm: ip Not tainted 4.17.0-rc4-petrm_net_ip6gre_headroom-custom-140 #11
[ 327.210496] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[ 327.219872] Call Trace:
[ 327.222384] dump_stack+0xc3/0x12b
[ 327.234007] ubsan_epilogue+0x9/0x49
[ 327.237638] ubsan_type_mismatch_common+0x1f9/0x2d0
[ 327.255769] __ubsan_handle_type_mismatch+0x90/0xa7
[ 327.264716] mlxsw_sp_fid_type+0x35/0x50 [mlxsw_spectrum]
[ 327.270255] mlxsw_sp_port_vlan_router_leave+0x46/0xc0 [mlxsw_spectrum]
[ 327.277019] mlxsw_sp_inetaddr_port_vlan_event+0xe1/0x340 [mlxsw_spectrum]
[ 327.315031] mlxsw_sp_netdevice_vrf_event+0xa8/0x100 [mlxsw_spectrum]
[ 327.321626] mlxsw_sp_netdevice_event+0x276/0x430 [mlxsw_spectrum]
[ 327.367863] notifier_call_chain+0x4c/0x150
[ 327.372128] __netdev_upper_dev_link+0x1b3/0x260
[ 327.399450] vrf_add_slave+0xce/0x170 [vrf]
[ 327.403703] do_setlink+0x658/0x1d70
[ 327.508998] rtnl_newlink+0x908/0xf20
[ 327.559128] rtnetlink_rcv_msg+0x50c/0x720
[ 327.571720] netlink_rcv_skb+0x16a/0x1f0
[ 327.583450] netlink_unicast+0x2ca/0x3e0
[ 327.599305] netlink_sendmsg+0x3e2/0x7f0
[ 327.616655] sock_sendmsg+0x76/0xc0
[ 327.620207] ___sys_sendmsg+0x494/0x5d0
[ 327.666117] __sys_sendmsg+0xc2/0x130
[ 327.690953] do_syscall_64+0x66/0x370
[ 327.694677] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 327.699782] RIP: 0033:0x7f4c2f3f8037
[ 327.703393] RSP: 002b:00007ffe8c389708 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 327.711035] RAX: ffffffffffffffda RBX: 000000005b03f53e RCX: 00007f4c2f3f8037
[ 327.718229] RDX: 0000000000000000 RSI: 00007ffe8c389760 RDI: 0000000000000003
[ 327.725431] RBP: 00007ffe8c389760 R08: 0000000000000000 R09: 00007f4c2f443630
[ 327.732632] R10: 00000000000005eb R11: 0000000000000246 R12: 0000000000000000
[ 327.739833] R13: 00000000006774e0 R14: 00007ffe8c3897e8 R15: 0000000000000000
[ 327.747096] ================================================================================
Fixes: 9589a7b5d7d9 ("mlxsw: spectrum: Handle VLAN devices linking / unlinking")
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit "net: qcom/emac: Encapsulate sgmii ops under one structure"
introduced the sgmii_ops structure, but did not correctly initialize
it on device tree platforms. This resulted in compiler warnings when
ACPI is not enabled.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With CONFIG_TLS=m and MLX5_CORE_EN=y, we get a link failure:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_ooo':
tls_rxtx.c:(.text+0x24c): undefined reference to `tls_get_record'
drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_tx_skb':
tls_rxtx.c:(.text+0x9a8): undefined reference to `tls_device_sk_destruct'
This narrows down the dependency to only allow the configurations
that will actually work. The existing dependency on TLS_DEVICE is
not sufficient here since MLX5_EN_TLS is a 'bool' symbol.
Fixes: c83294b9efa5 ("net/mlx5e: TLS, Add Innova TLS TX support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One
can lose significant bits and get 0 from non-0 value returned by the
memcmp().
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the message be freed immediately, no need to trim it
back to the previous size.
Inspired by commit 7a9b3ec1e19f ("nl80211: remove unnecessary genlmsg_cancel() calls")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes the following sparse warnings:
net/ipv4/bpfilter/sockopt.c:13:5: warning:
symbol 'bpfilter_mbox_request' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
nfp: abm: RED/MQ qdisc offload
This is second batch of advanced buffer management nfp driver
changes. This series adds the qdisc offload. Support for
a very simple subset of RED qdisc offload is added as needed
for DCTCP ECN marking (min and max thresholds set to the same
value).
The first two patches fix glitches introduced by the previous
series. We have to be careful about phys_port_name handling,
because VFs share the same code path, and some user space may
get confused by the names we chose.
Since unlike previous offloads we can report the queue backlog
both in bytes and packets we need to adjust how statistics are
added up in the core (patch 6).
There are some extra statistics we want to expose which don't
fit into TC stats, namely counts of packets which have been fast-
-forwarded without getting enqueued because there was no
contention and number of packets that were ever queued (sum of
all momentary backlogs). We expose those through ethtool stats
(patches 8 and 9).
Remaining 5 patches add MQ offload - to be able to set different
configurations on different queues. Representors are made multi-
-queue and we add offload support to MQ. MQ stats are added up
before calling ->dump qdiscs on the children, and therefore don't
include updated offload values. To avoid clearly incorrect stats
MQ is made to also request stats update from offloads. This way
we can correct the diff at the driver level.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Report the stat diff to make sure MQ stats add up to child stats.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MQ doesn't hold any statistics on its own, however, statistic
from offloads are requested starting from the root, hence MQ
will read the old values for its sums. Call into the drivers,
because of the additive nature of the stats drivers are aware
of how much "pending updates" they have to children of the MQ.
Since MQ reset its stats on every dump we can simply offset
the stats, predicting how stats of offloaded children will
change.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for MQ offload and setting RED parameters
on queue-by-queue basis.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mq offload is trivial, we just need to let the device know
that the root qdisc is mq. Alternative approach would be
to export qdisc_lookup() and make drivers check the root
type themselves, but notification via ndo_setup_tc is more
in line with other qdiscs.
Note that mq doesn't hold any stats on it's own, it just
adds up stats of its children.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allocate the PF representor as multi-queue to allow setting
the configuration per-queue.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a handful of statistics exposing some internal details
of the implementation. Expose those via ethtool.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow nfp apps to add extra ethtool stats.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Report basic and extended RED statistics back to TC.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AFAICT struct gnet_stats_queue.qlen is not used in Qdiscs.
It may, however, be useful for offloads to report HW queue
length there. Add that value to the result of qdisc_qlen_sum().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Offload simple RED configurations. For now support only DCTCP
like scenarios where min and max are the same.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Queue levels for simple ECN marking are stored in _abi_nfd_out_q_lvls_X
symbol, where X is the PCIe PF id. Find out the location of that symbol
and add helpers for modifying it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ABM NIC FW has a cut-through mode where the PCIe queuing
is bypassed, thus working like our standard NIC FWs. Use this
mode by default and only enable queuing in switchdev mode where
users can configure it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some drivers are using a bare number inside phys_port_name
as VF id and OpenStack's regexps will pick it up. We can't
use a bare number for your vNICs, prefix the names with 'n'.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After recent change we started returning 0 from
ndo_get_phys_port_name for VFs. The name parameter for
ndo_get_phys_port_name is not initialized by the stack so
this can lead to a crash. We should have kept returning
-EOPNOTSUPP in the first place.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2018-05-25
This series includes updates for mlx5e netdev driver.
1) Allowr flow based VF vport mirroring under sriov switchdev scheme,
added support for offloading the TC mirred mirror sub-action, from
Chris Mi.
=================
From: Or Gerlitz <ogerlitz@mellanox.com>
The user will typically set the actions order such that the mirror
port (mirror VF) sees packets as the original port (VF under
mirroring) sent them or as it will receive them. In the general case,
it means that packets are potentially sent to the mirror port before
or after some actions were applied on them.
To properly do that, we follow on the exact action order as set for
the flow and make sure this will also be the case when we program the
HW offload.
If all the actions should apply before forwarding to the mirror and dest port,
mirroring is just multicasting to the two vports. Otherwise, we split
the TC flow to two HW rules, where the 1st applies only the actions
needed up to the mirror (if there are such) and the 2nd the rest of
the actions plus the forwarding to the dest vport.
=================
2) Move to order-0 only allocations (using fragmented work queues) for all
work queues used by the driver, RX and TX descriptor rings
(RQs, SQs and Completion Queues (CQs)), from Tariq Toukan.
3) Avoid resetting netdevice statistics on netdevice
state changes, from Eran Ben Elisha.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The comment and trace_loginfo are not used anymore.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We can make all dumps and lookups lockless.
Dumps currently only hold the nfnl mutex on the dump request itself.
Dumps can span multiple syscalls, dump continuation doesn't acquire the
nfnl mutex anywhere, i.e. the dump callbacks in nf_tables already use
rcu and never rely on nfnl mutex being held.
So, just switch all dumpers to rcu.
This requires taking a module reference before dropping the rcu lock
so rmmod is blocked, we also need to hold module reference over
the entire dump operation sequence. netlink already supports this
via the .module member in the netlink_dump_control struct.
For the non-dump case (i.e. lookup of a specific tables, chains, etc),
we need to swtich to _rcu list iteration primitive and make sure we
use GFP_ATOMIC.
This patch also adds the new nft_netlink_dump_start_rcu() helper that
takes care of the get_ref, drop-rcu-lock,start dump,
get-rcu-lock,put-ref sequence.
The helper will be reused for all dumps.
Rationale in all dump requests is:
- use the nft_netlink_dump_start_rcu helper added in first patch
- use GFP_ATOMIC and rcu list iteration
- switch to .call_rcu
... thus making all dumps in nf_tables not depend on the
nfnl mutex anymore.
In the nf_tables_getgen: This callback just fetches the current base
sequence, there is no need to serialize this with nfnl nft mutex.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
abort batch processing and return so task can exit faster.
Otherwise even SIGKILL has no immediate effect.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
harmless, but it avoids sparse warnings:
nf_tables_api.c:2813:16: warning: incorrect type in return expression (different base types)
nf_tables_api.c:2863:47: warning: incorrect type in argument 3 (different base types)
nf_tables_api.c:3524:47: warning: incorrect type in argument 3 (different base types)
nf_tables_api.c:3538:55: warning: incorrect type in argument 3 (different base types)
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Just use .call_rcu instead. We can drop the rcu read lock
after obtaining a reference and re-acquire on return.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fixes the following sparse warning:
net/netfilter/nf_nat_core.c:1039:20: warning:
symbol 'nat_hook' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
synchronize_rcu() is expensive.
The commit phase currently enforces an unconditional
synchronize_rcu() after incrementing the generation counter.
This is to make sure that a packet always sees a consistent chain, either
nft_do_chain is still using old generation (it will skip the newly added
rules), or the new one (it will skip old ones that might still be linked
into the list).
We could just remove the synchronize_rcu(), it would not cause a crash but
it could cause us to evaluate a rule that was removed and new rule for the
same packet, instead of either-or.
To resolve this, add rule pointer array holding two generations, the
current one and the future generation.
In commit phase, allocate the rule blob and populate it with the rules that
will be active in the new generation.
Then, make this rule blob public, replacing the old generation pointer.
Then the generation counter can be incremented.
nft_do_chain() will either continue to use the current generation
(in case loop was invoked right before increment), or the new one.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While writing selftests for a new feature, I triggered two existing
bugs that deal with triggers and instances.
- a generic trigger bug where the triggers are not removed from a
linked list properly when deleting an instance.
- a bug specific to snapshots, where the snapshot is done in the top
level buffer, when it is supposed to snapshot the buffer associated
to the instance the snapshot trigger exists in"
* tag 'trace-v4.17-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Make the snapshot trigger work with instances
tracing: Fix crash when freeing instances with event triggers
|
|
Recently we have switched the csr addresses and values configuration
from a single configuration to all devices to a per-device configuration.
Doing that, the configuration for 6300 devices wasn't set.
This missing definition introduced a kernel panic once trying to access
the csr's.
Add the missing 6300 csr configuration.
While at it, add a checker that the csr values were indeed
configured, and bail out more gracefully if not.
Fixes: a8cbb46f831d ("iwlwifi: allow different csr flags for different device families")
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
bpfilter_process_sockopt is a callback that gets called from
ip_setsockopt() and ip_getsockopt(). However, when CONFIG_INET is
disabled, it never gets called at all, and assigning a function to the
callback pointer results in a link failure:
net/bpfilter/bpfilter_kern.o: In function `__stop_umh':
bpfilter_kern.c:(.text.unlikely+0x3): undefined reference to `bpfilter_process_sockopt'
net/bpfilter/bpfilter_kern.o: In function `load_umh':
bpfilter_kern.c:(.init.text+0x73): undefined reference to `bpfilter_process_sockopt'
Since there is no caller in this configuration, I assume we can
simply make the assignment conditional.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nospec quite reasonably asserts that it will never be used with an index
larger than unsigned long (that being the largest possibly index into an
C array). However, our ubi uses the convention of u64 for any large
integer, running afoul of the assertion on 32b. Reduce our index to an
unsigned long, checking for type overflow first.
drivers/gpu/drm/i915/i915_query.c: In function 'i915_query_ioctl':
include/linux/compiler.h:339:38: error: call to '__compiletime_assert_119' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
Reported-by: kbuild-all@01.org
Fixes: 84b510e22da7 ("drm/i915/query: Protect tainted function pointer lookup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522121018.15199-1-chris@chris-wilson.co.uk
(cherry picked from commit a33b1dc8a732144e11cb4bf067d24ba51e6b8ab0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
When there are 16 or more logical CPUs, we request for
`IWL_MAX_RX_HW_QUEUES` (16) IRQs only as we limit to that number of
IRQs, but later on we compare the number of IRQs returned to
nr_online_cpus+2 instead of max_irqs, the latter being what we
actually asked for. This ends up setting num_rx_queues to 17 which
causes lots of out-of-bounds array accesses later on.
Compare to max_irqs instead, and also add an assertion in case
num_rx_queues > IWM_MAX_RX_HW_QUEUES.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199551
Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX")
Signed-off-by: Hao Wei Tee <angelsl@in04.sg>
Tested-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
This reverts commit fb47ada8dc3c30c8e7b415da155742b49536c61e.
In some situations when we set TXOP_BACKOFF, the probe frame is
not sent at all. What it worse then sending probe frame as part
of AMPDU and can degrade 11n performance to 11g rates.
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Remove and refactor some code in order to avoid having identical code
for different branches.
Notice that the logic has been there since 2014.
Addresses-Coverity-ID: 1426199 ("Identical code for different branches")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Active scan is not allowed on radar channel, instead
using passvie scan with more time.
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
