summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-22wifi: mt76: mt7925: fix the wrong data type for scan commandMing Yen Hsieh
For the member of 'struct scan_req_tlv', replace data type of func_mask_ext from 'u8' to '__le32'. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: set page_pool napi pointer for mmio devicesLorenzo Bianconi
In order to recycle skbs in the page_pool "hot" cache in napi_pp_put_page routine, set napi pointer for MMIO devices in mt76_create_page_pool(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: move wed common utilities in wed.cLorenzo Bianconi
Introduce wed.c in order to collect mt76 wed common codebase used by mt7915 and mt7996 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt792x: fix ethtool warningGen Xu
Add a missing EHT related field to fix the following ethtool warning: [98179.287352] mt7921e 0003:01:00.0: ei: 74 SSTATS_LEN: 73 Fixes: c74df1c067f2 ("wifi: mt76: mt792x: introduce mt792x-lib module") Signed-off-by: Gen Xu <genxu6@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix HIF_TXD_V2_1 valueBenjamin Lin
Sync the value of HIF_TXD_V2_1 with firmware to let it correctly fill TXD values for HW path. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: connac: set correct muar_idx for mt799x chipsetsShayne Chen
The MUAR (multicast unicast address) is an address mapping table that participates in the process of searching WTBL entries. For mt799x chipsets, the default muar index of BMC WTBL is 0xe. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: add locking for accessing mapped registersShayne Chen
A race condition was observed when accessing mapped registers, so add locking to protect against concurrent access. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: remove TXS queue settingPeter Chiu
DMA queue settings of TXS will be initialized by the firmware. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix efuse reading issueStanleyYP Wang
The efuse data starts from the 48th bytes instead of 64th bytes in the returned event skb. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: mark GCMP IGTK unsupportedMichael-CY Lee
Since the FW does not support to handle the integrity and validation of IGTK in GCMP mode, return -EOPNOTSUPP to let it be handled by upper layer. Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix HE beamformer phy cap for station vifHoward Hsu
Set correct beamformer capabilities for station vif in HE PHY capability IE. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: ensure 4-byte alignment for beacon commandsBenjamin Lin
If TLV includes beacon content, its length might not be 4-byte aligned. Make sure the length is aligned before sending beacon commands to FW. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS capsBenjamin Lin
The EHT MCS map subfield of 20 MHz-Only is not present in the EHT capability of AP, so STA does not need to parse the subfield. Moreover, AP should parse the subfield only if STA is 20 MHz-Only, which can be confirmed by checking supported channel width in HE capability. Fixes: 92aa2da9fa49 ("wifi: mt76: mt7996: enable EHT support in firmware") Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: disable AMSDU for non-data framesPeter Chiu
Disable AMSDU for non-data frames to prevent TX token leak issues. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix TWT issuesPeter Chiu
This patch fixes the following TWT issues: - Change table_mask to u16 to support up to 16 TWT stations - Reject TWT flows for duplicated establishment - Fix possible unaligned pointer - Remove unsupported TWT_CONTROL_WAKE_DUR_UNIT flag - The minimum TWT duration supported by mt7996 chipsets is 64. Reply with TWT_SETUP_CMD_DICTATE if the min_twt_dur is smaller than 64 Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: check txs format before getting skb by pidPeter Chiu
The PPDU TXS does not include the error bit so it cannot use to report status to mac80211. This patch fixes issue that STA wrongly detects if AP is still alive. Fixes: 2569ea5326e2 ("wifi: mt76: mt7996: enable PPDU-TxS to host") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: support temperature sensorDeren Wu
Allow sensors tool to read radio's temperature, example: mt7925_phy8-pci-3b00 Adapter: PCI adapter temp1: +35.0°C Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: update PCIe DMA settingsDeren Wu
Fix the wrong WFDMA settings to improve TX performance. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: add support to set ifs time by mcu commandMing Yen Hsieh
There's a race between driver and fw on some tx/rx control registers when setting ifs, which will cause accidental hw queue pause problems. Avoid this by setting ifs time with bss_info mcu command. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: add flow to avoid chip bt function failQuan Zhou
A sub-process of Wifi L0.5 reset will make chip common partition enter low power, and have chance lead to Bluetooth host-to-chip command timeout, modify the software flow according to the chip's design to solve the problem. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix the wrong header translation configMing Yen Hsieh
The header translation config should set to broadcast and unicast cases correctly, not only unicast case. And also remove the cmds of wtbl (wlan table) series, because these MCU commands have already been replaced by other commands in mt7925. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix WoW failed in encrypted modeMing Yen Hsieh
When in suspend mode, WoW (Wake-on-WLAN) fails to wake the system remotely due to incorrect encryption mode settings. For the new mt7925 chipset, the old STA_REC_KEY_V2 command will send incorrect parameters to the firmware. Therefore, STA_REC_KEY_V3 has been introduced as a replacement for it. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix fw download failMing Yen Hsieh
Add an address of fw region for fw download. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix wmm queue mappingMing Yen Hsieh
Firmware uses access class index (ACI) for wmm parameters update, so convert mac80211 queue to ACI in mt7925_conf_tx(). Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix mcu query command failHao Zhang
Apply query command type properly to make the chip send the response back. Otherwise, we may see the command timeout in driver side. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Hao Zhang <hao.zhang@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz bandrong.yan
Driver should configure basic rate and phy mode for SAP mode. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: rong.yan <rong.yan@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz bandMing Yen Hsieh
Driver should setting correct phy mode to firmware when in legacy mode. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt76x2u: add netgear wdna3100v3 to device tableDacio Romero
Netgear WDNA3100v3 has a chipset that's compatible with the mt76x2u driver and works without modification with the mainline kernel by writing to sysfs. Signed-off-by: Dacio Romero <dacioromero@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt792xu: enable dmashdl supportDeren Wu
dmashdl(DMA scheduler) was disable and may cause packets corruption without propoer resource handling. Enable this to control resources between usb-bus/pse/hardware-ac-queue. Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: usb: store usb endpoint in mt76_queueLorenzo Bianconi
Store usb endpoint in mt76_queue structure and rework q2ep routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: usb: create a dedicated queue for psd trafficLorenzo Bianconi
Create a dedicate queue for psd/mgmt traffic and do not rely on voice one. This is a preliminary patch to fix mt7921u/mt7925 usb dmasl configuration. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix fw loading timeoutLorenzo Bianconi
Fix the following firmware loading error due to a wrong dma register configuration if wed is disabled. [ 8.245881] mt7996e_hif 0001:01:00.0: assign IRQ: got 128 [ 8.251308] mt7996e_hif 0001:01:00.0: enabling device (0000 -> 0002) [ 8.257674] mt7996e_hif 0001:01:00.0: enabling bus mastering [ 8.263488] mt7996e 0000:01:00.0: assign IRQ: got 126 [ 8.268537] mt7996e 0000:01:00.0: enabling device (0000 -> 0002) [ 8.274551] mt7996e 0000:01:00.0: enabling bus mastering [ 28.648773] mt7996e 0000:01:00.0: Message 00000010 (seq 1) timeout [ 28.654959] mt7996e 0000:01:00.0: Failed to get patch semaphore [ 29.661033] mt7996e: probe of 0000:01:00.0 failed with error -11 Suggested-by: Sujuan Chen" <sujuan.chen@mediatek.com> Fixes: 4920a3a1285f ("wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAM") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22dt-bindings: net: wireless: mt76: add interrupts description for MT7986Peter Chiu
The mt7986 can support four interrupts to distribute the interrupts to different CPUs. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7915: update mt798x_wmac_adie_patch_7976Peter Chiu
Add support for a newer ADIE version Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7915: add locking for accessing mapped registersShayne Chen
Sicne the mapping is global, mapped register access needs to be protected against concurrent access, otherwise a race condition might cause the reads or writes to go towards the wrong register Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7915: fix error recovery with WED enabledFelix Fietkau
Do not clear the interrupt mask register on MT7915, since that prevents MCU_CMD interrupts from being reported, thus causing timeouts during the reset sequence. Defer stopping WED until tx/rx processing activity has stopped. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: check txs format before getting skb by pidPeter Chiu
The PPDU TxS does not include the error bit so it cannot use to report status to mac80211. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: disable HW AMSDU when using fixed ratePeter Chiu
When using fixed rate, HW uses txd DW9 to store tx arrivial time if VTA is set. It would overwrite the msdu_id in txd and lead to token pending if amsdu is enable. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHYSiddharth Vadapalli
Commit bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY. While that commit indicated that the RTL8211F_PHYCR2 register is not supported by the "VD-CG" PHY model and therefore updated the corresponding section in rtl8211f_config_init() to be invoked conditionally, the call to "genphy_soft_reset()" was left as-is, when it should have also been invoked conditionally. This is because the call to "genphy_soft_reset()" was first introduced by the commit 0a4355c2b7f8 ("net: phy: realtek: add dt property to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY reset should be issued after setting bits in the PHYCR2 register. As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the rtl8211f_config_init() function by invoking "genphy_soft_reset()" conditionally based on the presence of the "PHYCR2" register. Fixes: bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240220070007.968762-1-s-vadapalli@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22Merge branch 'ioam6-fix-write-to-cloned-skb-s'Paolo Abeni
Justin Iurman says: ==================== ioam6: fix write to cloned skb's Make sure the IOAM data insertion is not applied on cloned skb's. As a consequence, ioam selftests needed a refactoring. ==================== Link: https://lore.kernel.org/r/20240219135255.15429-1-justin.iurman@uliege.be Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22selftests: ioam: refactoring to align with the fixJustin Iurman
ioam6_parser uses a packet socket. After the fix to prevent writing to cloned skb's, the receiver does not see its IOAM data anymore, which makes input/forward ioam-selftests to fail. As a workaround, ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to get hop-by-hop options. As a consequence, the hook is "after" the IOAM data insertion by the receiver and all tests are working again. Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22Fix write to cloned skb in ipv6_hop_ioam()Justin Iurman
ioam6_fill_trace_data() writes inside the skb payload without ensuring it's writeable (e.g., not cloned). This function is called both from the input and output path. The output path (ioam6_iptunnel) already does the check. This commit provides a fix for the input path, inside ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network header pointer ("nh") when returning from ipv6_hop_ioam(). Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22phonet/pep: fix racy skb_queue_empty() useRémi Denis-Courmont
The receive queues are protected by their respective spin-lock, not the socket lock. This could lead to skb_peek() unexpectedly returning NULL or a pointer to an already dequeued socket buffer. Fixes: 9641458d3ec4 ("Phonet: Pipe End Point for Phonet Pipes protocol") Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com> Link: https://lore.kernel.org/r/20240218081214.4806-2-remi@remlab.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22phonet: take correct lock to peek at the RX queueRémi Denis-Courmont
The receive queue is protected by its embedded spin-lock, not the socket lock, so we need the former lock here (and only that one). Fixes: 107d0d9b8d9a ("Phonet: Phonet datagram transport protocol") Reported-by: Luosili <rootlab@huawei.com> Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240218081214.4806-1-remi@remlab.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-21PPPoL2TP: Add more code snippetsSamuel Thibault
The existing documentation was not telling that one has to create a PPP channel and a PPP interface to get PPPoL2TP data offloading working. Also, tunnel switching was not mentioned, so that people were thinking it was not supported, while it actually is. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Tom Parkin <tparkin@katalix.com> Link: https://lore.kernel.org/r/20240217211425.qj576u3jmaa6yidf@begin Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: sparx5: Add spinlock for frame transmission from CPUHoratiu Vultur
Both registers used when doing manual injection or fdma injection are shared between all the net devices of the switch. It was noticed that when having two process which each of them trying to inject frames on different ethernet ports, that the HW started to behave strange, by sending out more frames then expected. When doing fdma injection it is required to set the frame in the DCB and then make sure that the next pointer of the last DCB is invalid. But because there is no locks for this, then easily this pointer between the DCB can be broken and then it would create a loop of DCBs. And that means that the HW will continuously transmit these frames in a loop. Until the SW will break this loop. Therefore to fix this issue, add a spin lock for when accessing the registers for manual or fdma injection. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net/sched: flower: Add lock protection when remove filter handleJianbo Liu
As IDR can't protect itself from the concurrent modification, place idr_remove() under the protection of tp->lock. Fixes: 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240220085928.9161-1-jianbol@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21devlink: fix port dump cmd typeJiri Pirko
Unlike other commands, due to a c&p error, port dump fills-up cmd with wrong value, different from port-get request cmd, port-get doit reply and port notification. Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW. Skimmed through devlink userspace implementations, none of them cares about this cmd value. Only ynl, for which, this is actually a fix, as it expects doit and dumpit ops rsp_value to be the same. Omit the fixes tag, even thought this is fix, better to target this for next release. Fixes: bfcd3a466172 ("Introduce devlink infrastructure") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240220075245.75416-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: stmmac: Fix EST offset for dwmac 5.10Kurt Kanzenbach
Fix EST offset for dwmac 5.10. Currently configuring Qbv doesn't work as expected. The schedule is configured, but never confirmed: |[ 128.250219] imx-dwmac 428a0000.ethernet eth1: configured EST The reason seems to be the refactoring of the EST code which set the wrong EST offset for the dwmac 5.10. After fixing this it works as before: |[ 106.359577] imx-dwmac 428a0000.ethernet eth1: configured EST |[ 128.430715] imx-dwmac 428a0000.ethernet eth1: EST: SWOL has been switched Tested on imx93. Fixes: c3f3b97238f6 ("net: stmmac: Refactor EST implementation") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20240220-stmmac_est-v1-1-c41f9ae2e7b7@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21udp: add local "peek offset enabled" flagPaolo Abeni
We want to re-organize the struct sock layout. The sk_peek_off field location is problematic, as most protocols want it in the RX read area, while UDP wants it on a cacheline different from sk_receive_queue. Create a local (inside udp_sock) copy of the 'peek offset is enabled' flag and place it inside the same cacheline of reader_queue. Check such flag before reading sk_peek_off. This will save potential false sharing and cache misses in the fast-path. Tested under UDP flood with small packets. The struct sock layout update causes a 4% performance drop, and this patch restores completely the original tput. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/67ab679c15fbf49fa05b3ffe05d91c47ab84f147.1708426665.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 09:37:55 +0000