summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-27igc: Simplify TSN flags handlingVinicius Costa Gomes
Separates the procedure done during reset from applying a configuration, knowing when the code is executing allow us to separate the better what changes the hardware state from what changes only the driver state. Introduces a flag for bookkeeping the driver state of TSN features. When Qav and frame-preemption is also implemented this flag makes it easier to keep track on whether a TSN feature driver state is enabled or not though controller state changes, say, during a reset. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Mallikarjuna Chilakala <mallikarjuna.chilakala@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-27igc: Use default cycle 'start' and 'end' values for queuesVinicius Costa Gomes
Sets default values for each queue cycle start and cycle end. This allows some simplification in the handling of these configurations as most TSN features in i225 require a cycle to be configured. In i225, cycle start and end time is required to be programmed for CBS to work properly. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Mallikarjuna Chilakala <mallikarjuna.chilakala@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-27um: vector: adjust to coalesce API changesJohannes Berg
The API changes were propagated to most drivers, but clearly arch/um/drivers/ was missed, perhaps due to looking only at the drivers/ folder. Fix that. Fixes: f3ccfda19319 ("ethtool: extend coalesce setting uAPI with CQE mode") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20210827094759.f3ab06684bd0.I985181cc00fe017cfe6413d9e1bb720cbe852e6d@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-27octeontx2-af: cn10K: support for sched lmtst and other featuresHarman Kalra
Enhancing the mailbox scope to support important configurations like enabling scheduled LMTST, disable LMTLINE prefetch, disable early completion for ordered LMTST, as per request from the application. On FLR these configurations will be reset to default. This patch also adds the 95XXO silicon version to octeontx2 silicon list. Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported modesPali Rohár
Armada 3700 does not support RXAUI, XFI and neither SFI. Remove unused macros for these unsupported modes. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 9695375a3f4a ("phy: add A3700 COMPHY support") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27phy: marvell: phy-mvebu-a3700-comphy: Rename HS-SGMMI to 2500Base-XPali Rohár
Comphy phy mode 0x3 is incorrectly named. It is not SGMII but rather 2500Base-X mode which runs at 3.125 Gbps speed. Rename macro names and comments to 2500Base-X. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 9695375a3f4a ("phy: add A3700 COMPHY support") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27phy: marvell: phy-mvebu-cp110-comphy: Rename HS-SGMMI to 2500Base-XPali Rohár
Comphy phy mode 0x3 is incorrectly named. It is not SGMII but rather 2500Base-X mode which runs at 3.125 Gbps speed. Rename macro names and comments to 2500Base-X. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: eb6a1fcb53e2 ("phy: mvebu-cp110-comphy: Add SMC call support") Fixes: c2afb2fef595 ("phy: mvebu-cp110-comphy: Rename the macro handling only Ethernet modes") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27Merge branch 'hns3-cleanups'David S. Miller
Guangbin Huang says: ==================== net: hns3: add some cleanups This series includes some cleanups for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: uniform type of function parameter cmdHao Chen
The parameter cmd in function definition of hns3_dbg_bd_file_init and hns3_dbg_common_file_init is used type u32, this patch uniforms them in function declaration to type u32 too. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: merge some repetitive macrosPeng Li
There are some repetitive macros have same meaning and value, this patch merges them to make code clean. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: package new functions to simplify hclgevf_mbx_handler codePeng Li
This patch packages two new function to simplify the function hclgevf_mbx_handler, and it can reduce the code cycle complexity and make code more concise. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: remove redundant param to simplify codePeng Li
The param msg_q is redundant, copy &req->msg to hdev->arq.msg_q[hdev->arq.tail] directly makes code clean. So removes the redundant param msg_q. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: use memcpy to simplify codePeng Li
Use memcpy to copy req->msg.resp_data to resp->additional_info, to simplify the code and improve a little efficiency. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: remove redundant param mbx_event_pendingPeng Li
This patch removes the redundant param mbx_event_pending. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: add hns3_state_init() to do state initializationHuazhong Tan
To improve the readability and maintainability, add hns3_state_init() to initialize the state, and this new function will be used to add more state initialization in the future. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27net: hns3: add macros for mac speeds of firmware commandGuangbin Huang
To improve code readability, replace digital numbers of mac speeds defined by firmware command with macros. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/David S. Miller
ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2021-08-27 1) Remove an unneeded extra variable in esp4 esp_ssg_unref. From Corey Minyard. 2) Add a configuration option to change the default behaviour to block traffic if there is no matching policy. Joint work with Christian Langrock and Antony Antony. 3) Fix a shift-out-of-bounce bug reported from syzbot. From Pavel Skripkin. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27Merge tag 'mlx5-updates-2021-08-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== This patch series contains various fixes, additions and improvements to mlx5 software steering. Patch 1: adds support for REMOVE_HEADER packet reformat - a new reformat type that is supported starting with ConnectX-6 DX, and allows removing an arbitrary size packet segment at a selected position. Patches 2 and 3: add support for VLAN pop on TX and VLAN push on RX flows. Patch 4: enables retransmission mechanism for the SW Steering RC QP. Patch 5: does some improvements to error flow in building STE array and adds a more informative printout of an invalid actions sequence. Patch 6: improves error flow on SW Steering QP error. Patch 7: reduces the log level of a message that is printed when a table is connected to a lower/same level destination table, as this case proves to be not as rare as it was in the past. Patch 8: adds missing support for matching on IPv6 flow label for devices older than ConnectX-6 DX. Patch 9: replaces uintN_t types with kernel-style types. Patch 10: allows for using the right API for updating flow tables - if it is a FW-owned table, then FW API will be used. Patch 11: adds support for 'ignore_flow_level' on multi-destination flow tables that are created by SW Steering. Patch 12: optimizes FDB RX steering rule by skipping matching on source port, as the source port for all incoming packets equals to wire. Patch 13: is a small code refactoring - it merges several DR_STE_SIZE enums into a single enum. Patch 14: does some additional refactoring and removes HW-specific STE type from NIC domain. Patch 15: removes rehash ctrl struct from dr_htbl struct and saves some memory. Patch 16: does a more significant improvement in terms of memory consumption and was able to save about 1.6 Gb for 8M rules. Patch 17: adds support for update FTE, which is needed for cases where there are multiple rules with the same match. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27Merge branch 'mptcp-Optimize-received-options-handling'David S. Miller
Mat Martineau says: ==================== mptcp: Optimize received options handling These patches optimize received MPTCP option handling in terms of both storage and fewer conditionals to evaluate in common cases, and also add a couple of cleanup patches. Patches 1 and 5 do some cleanup in checksum option parsing and clarification of lock handling. Patches 2 and 3 rearrange struct mptcp_options_received to shrink it slightly and consolidate frequently used fields in the same cache line. Patch 4 optimizes incoming MPTCP option parsing to skip many extra comparisons in the common case where only a DSS option is present. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27mptcp: make the locking tx schema more readablePaolo Abeni
Florian noted the locking schema used by __mptcp_push_pending() is hard to follow, let's add some more descriptive comments and drop an unneeded and confusing check. Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27mptcp: optimize the input options processingPaolo Abeni
Most MPTCP packets carries a single MPTCP subption: the DSS containing the mapping for the current packet. Check explicitly for the above, so that is such scenario we replace most conditional statements with a single likely() one. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27mptcp: consolidate in_opt sub-options fields in a bitmaskPaolo Abeni
This makes input options processing more consistent with output ones and will simplify the next patch. Also avoid clearing the suboption field after processing it, since it's not needed. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27mptcp: better binary layout for mptcp_options_receivedPaolo Abeni
This change reorder the mptcp_options_received fields to shrink the structure a bit and to ensure the most frequently used fields are all in the first cacheline. Sub-opt specific flags are moved out of the suboptions area, and we must now explicitly set them when the relevant suboption is parsed. There is a notable exception: 'csum_reqd' is used by both DSS and MPC suboptions, and keeping such field in the suboptions flag area will simplfy the next patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27mptcp: do not set unconditionally csum_reqd on incoming optPaolo Abeni
Should be set only if the ingress packets present it, otherwise we can confuse csum validation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26tcp: enable mid stream window clampNeil Spring
The TCP_WINDOW_CLAMP socket option is defined in tcp(7) to "Bound the size of the advertised window to this value." Window clamping is distributed across two variables, window_clamp ("Maximal window to advertise" in tcp.h) and rcv_ssthresh ("Current window clamp"). This patch updates the function where the window clamp is set to also reduce the current window clamp, rcv_sshthresh, if needed. With this, setting the TCP_WINDOW_CLAMP option has the documented effect of limiting the window. Signed-off-by: Neil Spring <ntspring@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210825210117.1668371-1-ntspring@fb.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26net/mlx5: DR, Add support for update FTEYevgeny Kliteynik
Add the support for update FTE, which is needed for cases where there are multiple rules with the same match. In such case fs_core will merge the actions and call update FTE to update current FTE. Since we don't want to disrupt the traffic, we will add the new duplicate rule, and only then remove the old duplicate rule. Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Improve rule tracking memory consumptionYevgeny Kliteynik
To track each STE of the rule a rule member was allocated, each member would point to one STE. This means that we would allocate 40B (rule member) * number of STEs per rule. To reduce this per rule allocation we use the STE tree pointers for next_htbl and pointing STE to navigate the tree, this allows us to keep only the pointer to the last STE of rule (always unique). From the last rule STE we are able to traverse and rebuild all of the STEs that construct the rule. In our testing with 8M rules, each consisting of 7 STES, we were able to reduce 1.6GB of memory. Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Remove rehash ctrl struct from dr_htblYevgeny Kliteynik
The calculations to decide for the maximum allowed collision threshold are simple and there is no reason to save them on the htbl struct. Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Remove HW specific STE type from nic domainYevgeny Kliteynik
Instead of using the HW specific STEv0 type, it is better to use an enum to indicate if this is an RX or TX nic domain. This means that now we will need to convert the nic domain type to the corresponding STE type. Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Merge DR_STE_SIZE enumsYevgeny Kliteynik
Merge DR_STE_SIZE enums - no need for a separate enum for reduced STE size. Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Skip source port matching on FDB RX domainYevgeny Kliteynik
The FDB RX pipe is connected to the wire and the source port for all incoming packets equals to wire, single uplink port per PF, this means there is no point of matching on the source port in such case. Once we recognize such case, we will optimize the RX steering rule. Note that in such case we clean both source_eswitch_owner_vhca_id and source_port. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Add ignore_flow_level support for multi-dest flow tablesYevgeny Kliteynik
When creating an FTE, we might need to create multi-destination flow table, which is eventually created by FW. In such case, this FW table should include all the FTE properties as requested by the upper layer, including the ability to point to another flow table with level lower or equal to the current table - indicated by the "ignore_flow_level" property. Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Use FW API when updating FW-owned flow tableYevgeny Kliteynik
Need to call the DR API only when it is DR table. To update FW-owned table the driver should call the FW API. Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, replace uintN_t with kernel-style typesYevgeny Kliteynik
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Support IPv6 matching on flow label for STEv0Yevgeny Kliteynik
Add missing support for matching on IPv6 flow label for STEv0. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Reduce print level for FT chaining level checkBodong Wang
There are usecases with Connection Tracking that have such connection as default, printing this warning in dmesg confuses the user. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Warn and ignore SW steering rule insertion on QP errYevgeny Kliteynik
In the event of SW steering QP entering error state, SW steering cannot insert more rules, and will silently ignore the insertion after issuing a warning. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Improve error flow in actions_build_ste_arrYevgeny Kliteynik
Improve error flow and print actions sequence when an invalid/unsupported sequence provided. Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Enable QP retransmissionYevgeny Kliteynik
Under high stress, SW steering might get stuck on polling for completion that never comes. For such cases QP needs to have protocol retransmission mechanism enabled. Currently the retransmission timeout is defined as 0 (unlimited). Fix this by defining a real timeout. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Enable VLAN pop on TX and VLAN push on RXYevgeny Kliteynik
Enable pop VLAN action in TX and push VLAN in RX. These actions are supported only on STEv1. On TX: when a host sends a packet, VLAN is popped at the beginning. On RX: just before passing the packet to the host the VLAN is pushed. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Split modify VLAN state to separate pop/push statesYevgeny Kliteynik
Split modify vlan state in the actions state machine to pop vlan and push vlan states. This enables using of pop/push vlan without restrictions (e.g. pop vlan on TX in STEv1). Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26net/mlx5: DR, Added support for REMOVE_HEADER packet reformatYevgeny Kliteynik
ConnectX supports offloading of various encapsulations and decapsulations (e.g. VXLAN), which are performed by 'Packet Reformat' action. Starting with ConnectX-6 DX, a new reformat type is supported - REMOVE_HEADER, which allows deleting an arbitrary size chunk at the selected position in the packet. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-26iwlwifi: mvm: don't use FW key ID in beacon protectionJohannes Berg
To check beacon protection had a mismatch of the key ID we currently use the key ID from the firmware, but firmware side we want to clean up the API to stop reporting this. Instead, check the IWL_RX_MPDU_STATUS_KEY_VALID bit that indicates that the firmware used the correct key, and if that's set but we get invalid MIC/replay use the key ID from the frame to look up the key and notify mac80211 of MIC error or replay. Since both keys must have the same cipher and thus MIC length, we can use either of them to look up the MIC length. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.30e665d39b07.I78bf7d304ef5a80cecf5fa1c1fca0b51b956cceb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: Fix scan channel flags settingsIlan Peer
The iwl_mvm_scan_ch_n_aps_flag() is called with a variable before the value of the variable is set. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.f6f188980a5e.Ie7331a8b94004d308f6cbde44e519155a5be91dd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: support broadcast TWT aloneShaul Triebitz
Tell the firmware about broadcast TWT support even if individual TWT is not supported. In that case the firmware will negotiate only a broadcast TWT session. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.556934ed023a.I843677252be64f4732e434ab9ef72f487625e49e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: introduce iwl_stored_beacon_notif_v3Gregory Greenman
The new version sends station id in the notification. It's still not used, but need to adjust the code since the offset of the data was changed. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.87bc9e45c40b.I770493dc4a293ed8bdf059518e94dccf5dd1b3a7@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: move get pnvm file name to a separate functionDror Moshe
Move code that generates the pnvm file name to a separate function, so that it can be reused. Signed-off-by: Dror Moshe <drorx.moshe@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.7d2dd18c75a2.I3652584755b9ab44909ddcd09ff4d80c6690a1ad@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: add support for responder config command version 9Avraham Stern
This version adds the following configuration options: 1. Enable/disable setting the session id in the FTM frame 2. Set the BSS color for the responder 3. Set the minimum and maximum time between measurements for non trigger based NDP ranging. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.0a10d43f3d7f.Ice4112c1910cf94babd1c2d492a3a3de9f7ee6cb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: add support for range request command version 13Avraham Stern
This version adds the following configuration options: 1. Set the BSS color for NDP ranging 2. Set the minimum and maximum time between measurements for non trigger based NDP ranging. 3. Terminate the session in case the responder requests LMR feedback. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.9dcd5210b7e5.I76f6977cde852de0f251344e279ad85076eef8d6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 00:28:47 +0000