| Age | Commit message (Collapse) | Author |
|---|
|
Reuse the skb buffer provided by the PCIe driver to pass it onto the
stack, instead of copying it to a new skb.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
BIG Create Sync requires the command to just generates a status so this
makes use of __hci_cmd_sync_status_sk to wait for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the BIG sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Broadcast Receiver requires creating PA sync but the command just
generates a status so this makes use of __hci_cmd_sync_status_sk to wait
for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the PA sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 4a5e0ba68676 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for everyone's favorite
pile of sand: Cavium ThunderX
x86:
- Bugfixes from a planned posted interrupt rework
- Do not use kvm_rip_read() unconditionally to cater for guests with
inaccessible register state"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Do not use kvm_rip_read() unconditionally for KVM_PROFILING
KVM: x86: Do not use kvm_rip_read() unconditionally in KVM tracepoints
KVM: SVM: WARN if an invalid posted interrupt IRTE entry is added
iommu/amd: WARN if KVM attempts to set vCPU affinity without posted intrrupts
iommu/amd: Return an error if vCPU affinity is set for non-vCPU IRTE
KVM: x86: Take irqfds.lock when adding/deleting IRQ bypass producer
KVM: x86: Explicitly treat routing entry type changes as changes
KVM: x86: Reset IRTE to host control if *new* route isn't postable
KVM: SVM: Allocate IR data using atomic allocation
KVM: SVM: Don't update IRTEs if APICv/AVIC is disabled
KVM: arm64, x86: make kvm_arch_has_irq_bypass() inline
arm64: Rework checks for broken Cavium HW in the PI code
|
|
Pull block fixes from Jens Axboe:
- Fix autoloading of drivers from stat*(2)
- Fix losing read-ahead setting one suspend/resume, when a device is
re-probed.
- Fix race between setting the block size and page cache updates.
Includes a helper that a coming XFS fix will use as well.
- ublk cancelation fixes.
- ublk selftest additions and fixes.
- NVMe pull via Christoph:
- fix an out-of-bounds access in nvmet_enable_port (Richard
Weinberger)
* tag 'block-6.15-20250424' of git://git.kernel.dk/linux:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
|
|
Pull io_uring fixes from Jens Axboe:
- Fix an older bug for handling of fallback task_work, when the task is
exiting. Found by code inspection while reworking cancelation.
- Fix duplicate flushing in one of the CQE posting helpers.
* tag 'io_uring-6.15-20250424' of git://git.kernel.dk/linux:
io_uring: fix 'sync' handling of io_fallback_tw()
io_uring: don't duplicate flushing in io_req_post_cqe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These are cpufreq driver fixes addressing multiple assorted issues:
- Fix possible out-of-bound / NULL-ptr-deref in cpufreq drivers
(Henry Martin, Andre Przywara)
- Fix Kconfig issues with compile-test in cpufreq drivers (Krzysztof
Kozlowski, Johan Hovold)
- Fix invalid return value in .get() in the CPPC cpufreq driver (Marc
Zyngier)
- Add SM8650 to cpufreq-dt-platdev blocklist (Pengyu Luo)"
* tag 'pm-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: fix compile-test defaults
cpufreq: cppc: Fix invalid return value in .get() callback
cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate()
cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate()
cpufreq: apple-soc: Fix null-ptr-deref in apple_soc_cpufreq_get_rate()
cpufreq: Do not enable by default during compile testing
cpufreq: Add SM8650 to cpufreq-dt-platdev blocklist
cpufreq: sun50i: prevent out-of-bounds access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.15-rc4.
Nothing major in here, just the normal set of issues that have cropped
up after -rc1:
- new device ids for usb-serial drivers
- new device quirks added
- typec driver fixes
- chipidea driver fixes
- xhci driver fixes
- wdm driver fixes
- cdns3 driver fixes
- MAINTAINERS file update
All of these, except for the MAINTAINERS file update, have been in
linux-next for a while with no reported issues"
* tag 'usb-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
MAINTAINERS: Assign maintainer for the port controller drivers
USB: serial: simple: add OWON HDS200 series oscilloscope support
USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe
USB: serial: option: add Sierra Wireless EM9291
usb: typec: class: Unlocked on error in typec_register_partner()
usb: quirks: Add delay init quirk for SanDisk 3.2Gen1 Flash Drive
USB: wdm: add annotation
USB: wdm: wdm_wwan_port_tx_complete mutex in atomic context
USB: wdm: close race between wdm_open and wdm_wwan_port_stop
USB: wdm: handle IO errors in wdm_wwan_port_start
USB: VLI disk crashes if LPM is used
usb: dwc3: gadget: check that event count does not exceed event buffer length
USB: storage: quirk for ADATA Portable HDD CH94
usb: quirks: add DELAY_INIT quirk for Silicon Motion Flash Drive
USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02)
usb: dwc3: xilinx: Prevent spike in reset signal
usb: cdns3: Fix deadlock when using NCM gadget
usb: chipidea: ci_hdrc_imx: implement usb_phy_init() error handling
usb: chipidea: ci_hdrc_imx: fix call balance of regulator routines
usb: chipidea: ci_hdrc_imx: fix usbmisc handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are three small tty/serial driver fixes for 6.15-rc4 to resolve
some reported issues. They are:
- permissions change for TIOCL_SELMOUSEREPORT to resolve a relaxing
of permissions that showed up 6.14 that wasn't _quite_ right.
- sifive serial driver fix
- msm serial driver fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sifive: lock port in startup()/shutdown() callbacks
tty: Require CAP_SYS_ADMIN for all usages of TIOCL_SELMOUSEREPORT
serial: msm: Configure correct working mode before starting earlycon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes to resolve reported
problems for 6.15-rc4. Included in here are:
- misc chrdev region range fix reported by many people
- nvmem driver fixes and dt updates
- mei new device id and fixes
- comedi driver fix
- pps driver fix
- binder debug log fix
- pci1xxxx driver fixes
- firmware driver fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
firmware: stratix10-svc: Add of_platform_default_populate()
mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type
mei: vsc: Fix fortify-panic caused by invalid counted_by() use
pps: generators: tio: fix platform_set_drvdata()
mcb: fix a double free bug in chameleon_parse_gdd()
misc: microchip: pci1xxxx: Fix incorrect IRQ status handling during ack
misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration
char: misc: register chrdev region with all possible minors
mei: me: add panther lake H DID
comedi: jr3_pci: Fix synchronous deletion of timer
binder: fix offset calculation in debug log
intel_th: avoid using deprecated page->mapping, index fields
dt-bindings: nvmem: Add compatible for MSM8960
dt-bindings: nvmem: Add compatible for IPQ5018
nvmem: qfprom: switch to 4-byte aligned reads
nvmem: core: update raw_len if the bit reading is required
nvmem: core: verify cell's raw_len
nvmem: core: fix bit offsets of more than one byte
dt-bindings: nvmem: fixed-cell: increase bits start value to 31
dt-bindings: nvmem: Add compatible for MS8937
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes to resolve a number of reported
problems. Included in here are:
- driver core sync fix revert to resolve a much reported problem,
hopefully this is finally resolved
- MAINTAINERS file update, documenting that the driver-core tree is
now under a "shared" maintainership model, thanks to Rafael and
Danilo for offering to do this!
- auxbus documentation and MAINTAINERS file update
- MAINTAINERS file update for Rust PCI code
- firmware rust binding fixup
- software node link fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
drivers/base/memory: Avoid overhead from for_each_present_section_nr()
software node: Prevent link creation failure from causing kobj reference count imbalance
device property: Add a note to the fwnode.h
drivers/base: Add myself as auxiliary bus reviewer
drivers/base: Extend documentation with preferred way to use auxbus
driver core: fix potential NULL pointer dereference in dev_uevent()
driver core: introduce device_set_driver() helper
Revert "drivers: core: synchronize really_probe() and dev_uevent()"
MAINTAINERS: update the location of the driver-core git tree
rust: firmware: Use `ffi::c_char` type in `FwFunc`
MAINTAINERS: pci: add entry for Rust PCI code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-maping fixes from Marek Szyprowski:
- avoid unused variable warnings (Arnd Bergmann, Marek Szyprowski)
- add runtume warnings and debug messages for devices with limited DMA
capabilities (Balbir Singh, Chen-Yu Tsai)
* tag 'dma-mapping-6.15-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-coherent: Warn if OF reserved memory is beyond current coherent DMA mask
dma-mapping: Fix warning reported for missing prototype
dma-mapping: avoid potential unused data compilation warning
dma/mapping.c: dev_dbg support for dma_addressing_limited
dma/contiguous: avoid warning about unused size_bytes
|
|
Pull xfs fixes from Carlos Maiolino:
"This contains a fix for a build failure on some 32-bit architectures
and a warning generating docs"
* tag 'xfs-fixes-6.15-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove duplicate Zoned Filesystems sections in admin-guide
XFS: fix zoned gc threshold math for 32-bit arches
|
|
When building the latest samples/bpf on LoongArch Fedora
make M=samples/bpf
There are compilation errors as follows:
In file included from ./linux/samples/bpf/sockex2_kern.c:2:
In file included from ./include/uapi/linux/in.h:25:
In file included from ./include/linux/socket.h:8:
In file included from ./include/linux/uio.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/loongarch/include/asm/thread_info.h:15:
In file included from ./arch/loongarch/include/asm/processor.h:13:
In file included from ./arch/loongarch/include/asm/cpu-info.h:11:
./arch/loongarch/include/asm/loongarch.h:13:10: fatal error: 'larchintrin.h' file not found
^~~~~~~~~~~~~~~
1 error generated.
larchintrin.h is included in /usr/lib64/clang/14.0.6/include,
and the header file location is specified at compile time.
Test on LoongArch Fedora:
https://github.com/fedora-remix-loongarch/releases-info
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: zhangxi <zhangxi@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250425095042.838824-1-jianghaoran@kylinos.cn
|
|
Add namespace to BPF internal symbols used by light skeleton
to prevent abuse and document with the code their allowed usage.
Fixes: b1d18a7574d0 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20250425014542.62385-1-alexei.starovoitov@gmail.com
|
|
Pull bcachefs fixes from Kent Overstreet:
- Case insensitive directories now work
- Ciemap now correctly reports on unwritten pagecache data
- bcachefs tools 1.25.1 was incorrectly picking unaligned bucket sizes;
fix journal and write path bugs this uncovered
And assorted smaller fixes...
* tag 'bcachefs-2025-04-24' of git://evilpiepirate.org/bcachefs: (24 commits)
bcachefs: Rework fiemap transaction restart handling
bcachefs: add fiemap delalloc extent detection
bcachefs: refactor fiemap processing into extent helper and struct
bcachefs: track current fiemap offset in start variable
bcachefs: drop duplicate fiemap sync flag
bcachefs: Fix btree_iter_peek_prev() at end of inode
bcachefs: Make btree_iter_peek_prev() assert more precise
bcachefs: Unit test fixes
bcachefs: Print mount opts earlier
bcachefs: unlink: casefold d_invalidate
bcachefs: Fix casefold lookups
bcachefs: Casefold is now a regular opts.h option
bcachefs: Implement fileattr_(get|set)
bcachefs: Allocator now copes with unaligned buckets
bcachefs: Start copygc, rebalance threads earlier
bcachefs: Refactor bch2_run_recovery_passes()
bcachefs: bch2_copygc_wakeup()
bcachefs: Fix ref leak in write_super()
bcachefs: Change __journal_entry_close() assert to ERO
bcachefs: Ensure journal space is block size aligned
...
|
|
Brandon Kammerdiener says:
====================
This patchset fixes an endless loop condition that can occur in
bpf_for_each_hash_elem, causing the core to softlock. My understanding is
that a combination of RCU list deletion and insertion introduces the new
element after the iteration cursor and that there is a chance that an RCU
reader may in fact use this new element in iteration. The patch uses a
_safe variant of the macro which gets the next element to iterate before
executing the loop body for the current element.
I have also added a subtest in the for_each selftest that can trigger this
condition without the fix.
Changes since v2:
- Renaming and additional checks in selftests/bpf/prog_tests/for_each.c
Changes since v1:
- Added missing Signed-off-by lines to both patches
====================
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://patch.msgid.link/20250424153246.141677-1-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add test that modifies the map while it's being iterated in such a way that
hangs the kernel thread unless the _safe fix is applied to
bpf_for_each_hash_elem.
Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com>
Link: https://lore.kernel.org/r/20250424153246.141677-3-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
|
|
The _safe variant used here gets the next element before running the callback,
avoiding the endless loop condition.
Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com>
Link: https://lore.kernel.org/r/20250424153246.141677-2-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
|
|
Especially the port manager (tcpm.c) is so major driver that
it should have somebody watching over it who really
understands it, and the port controller interface in
general. Assigning Badhri as the designated reviewer and
restoring the status to Maintained from Orphan.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250407133306.387576-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, setxattrat(2) and getxattrat(2) are wrongly handling the
calls of the from setxattrat(AF_FDCWD, NULL, AT_EMPTY_PATH, ...) and
fail with -EBADF error instead of operating on CWD. Fix it.
Fixes: 6140be90ec70 ("fs/xattr: add *at family syscalls")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/20250424132246.16822-2-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
I used to maintain Allwinner SoC cpufreq and thermal drivers and
have some work experience in the F2FS file system.
I volunteered to maintain the code together with Slava and Adrian.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/20250423123423.2062619-1-frank.li@vivo.com
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
pipe_clear_nowait has two noinline macros, but we only need one.
I checked the whole tree, and this is the only occurrence:
$ grep -r "noinline .* noinline"
fs/splice.c:static noinline void noinline pipe_clear_nowait(struct file *file)
$
Fixes: 0f99fc513ddd ("splice: clear FMODE_NOWAIT on file if splice/vmsplice is used")
Signed-off-by: "T.J. Mercier" <tjmercier@google.com>
Link: https://lore.kernel.org/20250423180025.2627670-1-tjmercier@google.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The recent move of the bdev_statx call to the low-level vfs_getattr_nosec
helper caused it being used by devtmpfs, which leads to deadlocks in
md teardown due to the block device lookup and put interfering with the
unusual lifetime rules in md.
But as handle_remove only works on inodes created and owned by devtmpfs
itself there is no need to use vfs_getattr_nosec vs simply reading the
mode from the inode directly. Switch to that to avoid the bdev lookup
or any other unintentional side effect.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reported-by: Xiao Ni <xni@redhat.com>
Fixes: 777d0961ff95 ("fs: move the bdex_statx call to vfs_getattr_nosec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250423045941.1667425-1-hch@lst.de
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Xiao Ni <xni@redhat.com>
Tested-by: Ayush Jain <Ayush.jain3@amd.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
After recent changes in the VM network stack, the host fails to
display the IP addresses of the VM. As a result the "IP Addresses"
column in the "Networking" tab in the Windows Hyper-V Manager is
empty. This is caused by a change in the expected output of the
"ip route show" command. Previously the gateway address was shown
in the third row. Now the gateway addresses might be split into
several lines of output. As a result, the string "ra" instead of
an IP address is sent to the host.
To me more specific, a VM with the wellknown wicked network
managing tool still shows the expected output in recent openSUSE
Tumbleweed snapshots:
ip a show dev uplink;ip -4 route show;ip -6 route show
2: uplink: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state ...
link/ether 00:15:5d:d0:93:08 brd ff:ff:ff:ff:ff:ff
inet 1.2.3.4/22 brd 1.2.3.255 scope global uplink
valid_lft forever preferred_lft forever
inet6 fe80::215:5dff:fed0:9308/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
default via 1.2.3.254 dev uplink proto dhcp
1.2.3.0/22 dev uplink proto kernel scope link src 1.2.3.4
fe80::/64 dev uplink proto kernel metric 256 pref medium
default via fe80::26fc:4e00:3b:74 dev uplink proto ra metric 1024 exp...
default via fe80::6a22:8e00:fb:14f8 dev uplink proto ra metric 1024 e...
A similar VM, but with NetworkManager as network managing tool:
ip a show dev eth0;ip -4 route show;ip -6 route show
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP...
link/ether 00:15:5d:d0:93:0b brd ff:ff:ff:ff:ff:ff
inet 1.2.3.8/22 brd 1.2.3.255 scope global dynamic noprefixroute ...
valid_lft 1022sec preferred_lft 1022sec
inet6 fe80::215:5dff:fed0:930b/64 scope link noprefixroute
valid_lft forever preferred_lft forever
default via 1.2.3.254 dev eth0 proto dhcp src 1.2.3.8 metric 100
1.2.3.0/22 dev eth0 proto kernel scope link src 1.2.3.8 metric 100
fe80::/64 dev eth0 proto kernel metric 1024 pref medium
default proto ra metric 20100 pref medium
nexthop via fe80::6a22:8e00:fb:14f8 dev eth0 weight 1
nexthop via fe80::26fc:4e00:3b:74 dev eth0 weight 1
Adjust the route parsing to use a single line for each line of
output. Also use a single shell invocation to retrieve both IPv4
and IPv6 information. The actual IP addresses are expected after
the "via" keyword.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241202102235.9701-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241202102235.9701-1-olaf@aepfle.de>
|
|
Commit ddd0a42671c0 only increments scomp_scratch_users when it was 0,
causing a panic when using ipcomp:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 619 Comm: ping Tainted: G N 6.15.0-rc3-net-00032-ga79be02bba5c #41 PREEMPT(full)
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:inflate_fast+0x5a2/0x1b90
[...]
Call Trace:
<IRQ>
zlib_inflate+0x2d60/0x6620
deflate_sdecompress+0x166/0x350
scomp_acomp_comp_decomp+0x45f/0xa10
scomp_acomp_decompress+0x21/0x120
acomp_do_req_chain+0x3e5/0x4e0
ipcomp_input+0x212/0x550
xfrm_input+0x2de2/0x72f0
[...]
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Instead, let's keep the old increment, and decrement back to 0 if the
scratch allocation fails.
Fixes: ddd0a42671c0 ("crypto: scompress - Fix scratch allocation failure handling")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but
we may have scheduled task work via io_uring_cmd_complete_in_task() for
dispatching request, then kernel crash can be triggered.
Fix it by not trying to canceling the command if ublk block request is
started.
Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd")
Reported-by: Jared Holzman <jholzman@nvidia.com>
Tested-by: Jared Holzman <jholzman@nvidia.com>
Closes: https://lore.kernel.org/linux-block/d2179120-171b-47ba-b664-23242981ef19@nvidia.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We call io_uring_cmd_complete_in_task() to schedule task_work for handling
UBLK_U_IO_NEED_GET_DATA.
This way is really not necessary because the current context is exactly
the ublk queue context, so call ublk_dispatch_req() directly for handling
UBLK_U_IO_NEED_GET_DATA.
Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd")
Tested-by: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mark Bloch says:
====================
mlx5 misc fixes 2025-04-23
This patchset includes misc fixes from the team for the mlx5 core
and Ethernet drivers.
====================
Link: https://patch.msgid.link/20250423083611.324567-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cited commit assumes enabling roce always succeeds. But it is
not true. Add error handling for it.
Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RTNL needs to be acquired before state_lock.
Fixes: fdce06bda7e5 ("net/mlx5e: Acquire RTNL lock before RQs/SQs activation/deactivation")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250423083611.324567-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously the offload of the rule with header rewrite and mirror to
both internal and external destinations is skipped if the encap entry
is not valid. But it shouldn't because driver will try to offload it
again if neighbor is updated and encap entry is valid, to replace the
old FTE added for slow path. But the extra split attr doesn't exist at
that time as the process is skipped, driver then fails to offload it.
To fix this issue, remove the checking and continue the attr process
if encap entry is invalid.
Fixes: b11bde56246e ("net/mlx5e: TC, Offload rewrite and mirror to both internal and external dests")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250423083611.324567-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initialize the source MAC address when creating the default GID entry.
Since this entry is used only for loopback traffic, it only needs to
be a unicast address. A zeroed-out MAC address is sufficient for this
purpose.
Without this fix, random bits would be assigned as the source address.
If these bits formed a multicast address, the firmware would return an
error, preventing the user from switching to switchdev mode:
Error: mlx5_core: Failed setting eswitch to offloads.
kernel answers: Invalid argument
Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Symbolic (e.g. "vxlan") and custom (e.g. "tunnel_header_0") tunnels
cannot be combined, but the match params interface does not have fields
for matching on vxlan gbp. To match vxlan bgp, the tc_tun layer uses
tunnel_header_0.
Allow matching on both VNI and GBP by matching the VNI with a custom
tunnel header instead of the symbolic field name.
Matching solely on the VNI continues to use the symbolic field name.
Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bring back previous offset calculation behaviour
in AF_XDP unaligned umem mode.
In unaligned mode, upper 16 bits should contain
data offset, lower 48 bits should contain
only specific chunk location without offset.
Remove pool->headroom duplication into 48bit address.
Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bea14124bacb ("xsk: Get rid of xdp_buff_xsk::orig_addr")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416112925.7501-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.
RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.
Protect both queues by acquiring spinlock in shared
xsk_buff_pool.
Lock contention may be minimized in the future by some
per-thread FQ buffering.
It's safe and necessary to move spin_lock_bh(rx_lock)
after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by
xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment
of xsk_release() or xsk_unbind_dev(),
however this will not cause any data races or
race conditions. xsk_unbind_dev() removes xdp
socket from all maps and waits for completion
of all outstanding rx operations. Packets in
RX path will either complete safely or drop.
Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bf0bdd1343efb ("xdp: fix race on generic receive path")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416101908.10919-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Restart handling in the previous patch was incorrect, so: move btree
operations into a separate helper, and run it with a lockrestart_do().
Additionally, clarify whether pagecache or the btree takes precedence.
Right now, the btree takes precedence: this is incorrect, but it's
needed to pass fstests. Add a giant comment explaining why.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs currently populates fiemap data from the extents btree.
This works correctly when the fiemap sync flag is provided, but if
not, it skips all delalloc extents that have not yet been flushed.
This is because delalloc extents from buffered writes are first
stored as reservation in the pagecache, and only become resident in
the extents btree after writeback completes.
Update the fiemap implementation to process holes between extents by
scanning pagecache for data, via seek data/hole. If a valid data
range is found over a hole in the extent btree, fake up an extent
key and flag the extent as delalloc for reporting to userspace.
Note that this does not necessarily change behavior for the case
where there is dirty pagecache over already written extents, where
when in COW mode, writeback will allocate new blocks for the
underlying ranges. The existing behavior is consistent with btrfs
and it is recommended to use the sync flag for the most up to date
extent state from fiemap.
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
The bulk of the loop in bch2_fiemap() involves processing the
current extent key from the iter, including following indirections
and trimming the extent size and such. This patch makes a few
changes to reduce the size of the loop and facilitate future changes
to support delalloc extents.
Define a new bch_fiemap_extent structure to wrap the bkey buffer
that holds the extent key to report to userspace along with
associated fiemap flags. Update bch2_fill_extent() to take the
bch_fiemap_extent as a param instead of the individual fields.
Finally, lift the bulk of the extent processing into a
bch2_fiemap_extent() helper that takes the current key and formats
the bch_fiemap_extent appropriately for the fill function.
No functional changes intended by this patch.
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
FIEMAP_FLAG_SYNC handling was deliberately moved into core code in
commit 45dd052e67ad ("fs: handle FIEMAP_FLAG_SYNC in fiemap_prep"),
released in kernel v5.8. Update bcachefs accordingly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
At the end of the inode, on an extents iterator, peek_slot() has to
advance to the next position to avoid returning a 0 size extent, which
is not allowed.
Changing iter->pos confuses peek_prev(), but we don't need to call
peek_slot() in this case.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The issue this assert is guarding against is that in
BTREE_ITER_filter_snapshots mode we only want to be iterating within a
single inode number - if we iterate into another inode number with keys
for a different snapshot tree, we'll loop arbitrarily long before
finding a key we can return.
This comes up in the unit tests, where we're using inode 0 for our test
keys.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The peek_end() tests expect an empty btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we aren't mounting with the correct degraded option, it's helpful to
know that before we fail to mount degraded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
casefolding results in additional aliases on lookup for the
non-casefolded names - these need invalidating on unlink.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add casefolding to bch2_lookup_trans:
During the delay between when casefolding was written and when it was
merged, the main filesystem lookup path grew self healing - which meant
it was no longer using bch2_dirent_lookup_trans(), where casefolding on
lookups happens.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The XOL (execute out-of-line) buffer is used to single-step the
replaced instruction(s) for uprobes. The RISC-V port was missing a
proper fence.i (i$ flushing) after constructing the XOL buffer, which
can result in incorrect execution of stale/broken instructions.
This was found running the BPF selftests "test_progs:
uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the
uprobes tests randomly blew up.
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-2-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The flush_icache_range() function is implemented as a "function-like
macro with unused parameters", which can result in "unused variables"
warnings.
Replace the macro with a static inline function, as advised by
Documentation/process/coding-style.rst.
Fixes: 08f051eda33b ("RISC-V: Flush I$ when making a dirty page executable")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
