summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-15selftests/bpf: netns_new() and netns_free() helpers.Kui-Feng Lee
netns_new()/netns_free() create/delete network namespaces. They support the option '-m' of test_progs to start/stop traffic monitor for the network namespace being created for matched tests. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240815053254.470944-4-thinker.li@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-08-15selftests/bpf: Add the traffic monitor option to test_progs.Kui-Feng Lee
Add option '-m' to test_progs to accept names and patterns of test cases. This option will be used later to enable traffic monitor that capture network packets generated by test cases. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240815053254.470944-3-thinker.li@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-08-15selftests/bpf: Add traffic monitor functions.Kui-Feng Lee
Add functions that capture packets and print log in the background. They are supposed to be used for debugging flaky network test cases. A monitored test case should call traffic_monitor_start() to start a thread to capture packets in the background for a given namespace and call traffic_monitor_stop() to stop capturing. (Or, option '-m' implemented by the later patches.) lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 68, SYN lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 60, SYN, ACK lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 60, ACK lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 52, ACK lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 52, FIN, ACK lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 52, RST, ACK Packet file: packets-2173-86-select_reuseport:sockhash_IPv4_TCP_LOOPBACK_test_detach_bpf-test.log #280/87 select_reuseport/sockhash IPv4/TCP LOOPBACK test_detach_bpf:OK The above is the output of an example. It shows the packets of a connection and the name of the file that contains captured packets in the directory /tmp/tmon_pcap. The file can be loaded by tcpdump or wireshark. This feature only works if libpcap is available. (Could be found by pkg-config) Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240815053254.470944-2-thinker.li@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-08-14Merge branch 'selftests/bpf: convert three other cgroup tests to test_progs'Martin KaFai Lau
Alexis Lothoré (eBPF Foundation) says: ==================== Hello, this series brings a new set of test converted to the test_progs framework. Since the tests are quite small, I chose to group three tests conversion in the same series, but feel free to let me know if I should keep one series per test. The series focuses on cgroup testing and converts the following tests: - get_cgroup_id_user - cgroup_storage - test_skb_cgroup_id_user Changes in v4: - Fix test after netns addition by making sure loopack interface is up - Link to v3: https://lore.kernel.org/r/20240812-convert_cgroup_tests-v3-0-47ac6ce4e88b@bootlin.com Changes in v3: - Fixed multiple leaks on cgroup file descriptors and sockets - Used dedicated network namespaces for tests involving network - Link to v2: https://lore.kernel.org/r/20240806-convert_cgroup_tests-v2-0-180c57e5b710@bootlin.com Changes in v2: - Use global variables instead of maps when possible - Collect review tags from Alan - Link to v1: https://lore.kernel.org/r/20240731-convert_cgroup_tests-v1-0-14cbc51b6947@bootlin.com ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-08-14selftests/bpf: convert test_skb_cgroup_id_user to test_progsAlexis Lothoré (eBPF Foundation)
test_skb_cgroup_id_user allows testing skb cgroup id retrieval at different levels, but is not integrated in test_progs, so it is not run automatically in CI. The test overlaps a bit with cgroup_skb_sk_lookup_kern, which is integrated in test_progs and test extensively skb cgroup helpers, but there is still one major difference between the two tests which justifies the conversion: cgroup_skb_sk_lookup_kern deals with a BPF_PROG_TYPE_CGROUP_SKB (attached on a cgroup), while test_skb_cgroup_id_user deals with a BPF_PROG_TYPE_SCHED_CLS (attached on a qdisc) Convert test_skb_cgroup_id_user into test_progs framework in order to run it automatically in CI. The main differences with the original test are the following: - rename the test to make it shorter and more straightforward regarding tested feature - the wrapping shell script has been dropped since every setup step is now handled in the main C test file - the test has been renamed for a shorter name and reflecting the tested API - add dedicated assert log per level to ease test failure debugging - use global variables instead of maps to access bpf prog data Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-4-a33c03458cf6@bootlin.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-08-14selftests/bpf: add proper section name to bpf prog and rename itAlexis Lothoré (eBPF Foundation)
test_skb_cgroup_id_kern.c is currently involved in a manual test. In its current form, it can not be used with the auto-generated skeleton APIs, because the section name is not valid to allow libbpf to deduce the program type. Update section name to allow skeleton APIs usage. Also rename the program name to make it shorter and more straighforward regarding the API it is testing. While doing so, make sure that test_skb_cgroup_id.sh passes to get a working reference before converting it to test_progs - update the obj name - fix loading issue (verifier rejecting the program when loaded through tc, because of map not found), by preloading the whole obj with bpftool Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-3-a33c03458cf6@bootlin.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-08-14selftests/bpf: convert test_cgroup_storage to test_progsAlexis Lothoré (eBPF Foundation)
test_cgroup_storage is currently a standalone program which is not run when executing test_progs. Convert it to the test_progs framework so it can be automatically executed in CI. The conversion led to the following changes: - converted the raw bpf program in the userspace test file into a dedicated test program in progs/ dir - reduced the scope of cgroup_storage test: the content from this test overlaps with some other tests already present in test_progs, most notably netcnt and cgroup_storage_multi*. Those tests already check extensively local storage, per-cpu local storage, cgroups interaction, etc. So the new test only keep the part testing that the program return code (based on map content) properly leads to packet being passed or dropped. Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-2-a33c03458cf6@bootlin.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-08-14selftests/bpf: convert get_current_cgroup_id_user to test_progsAlexis Lothoré (eBPF Foundation)
get_current_cgroup_id_user allows testing for bpf_get_current_cgroup_id() bpf API but is not integrated into test_progs, and so is not tested automatically in CI. Convert it to the test_progs framework to allow running it automatically. The most notable differences with the old test are the following: - the new test relies on autoattach instead of manually hooking/enabling the targeted tracepoint through perf_event, which reduces quite a lot the test code size - it also accesses bpf prog data through global variables instead of maps - sleep duration passed to nanosleep syscall has been reduced to its minimum to not impact overall CI duration (we only care about the syscall being properly triggered, not about the passed duration) Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-1-a33c03458cf6@bootlin.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-08-12libbpf: Fix license for btf_relocate.cAlan Maguire
License should be // SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) ...as with other libbpf files. Fixes: 19e00c897d50 ("libbpf: Split BTF relocation") Reported-by: Neill Kapron <nkapron@google.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20240810093504.2111134-1-alan.maguire@oracle.com
2024-08-07Merge branch 'add-bpf_get_dentry_xattr'Alexei Starovoitov
Song Liu says: ==================== Add bpf_get_dentry_xattr Add a kfunc to read xattr from dentry. Also add selftest for the new kfunc. Changes v3 => v4: 1. Fix selftest build. V3: https://lore.kernel.org/bpf/20240806203340.3503805-1-song@kernel.org/T/#u Changes v2 => v3: 1. Move the kfuncs to fs/bpf_fs_kfuncs.c. 2. Fix selftests build error on s390. (Alexei) v2: https://lore.kernel.org/bpf/20240730230805.42205-1-song@kernel.org/T/#u Changes v1 => v2: 1. Remove 3 kfuncs that are ready yet. v1: https://lore.kernel.org/linux-fsdevel/20240725234706.655613-1-song@kernel.org/T/#u ==================== Link: https://lore.kernel.org/r/20240806230904.71194-1-song@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-08-07selftests/bpf: Add tests for bpf_get_dentry_xattrSong Liu
Add test for bpf_get_dentry_xattr on hook security_inode_getxattr. Verify that the kfunc can read the xattr. Also test failing getxattr from user space by returning non-zero from the LSM bpf program. Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240806230904.71194-4-song@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-08-07bpf: Add kfunc bpf_get_dentry_xattr() to read xattr from dentrySong Liu
This kfunc can be used in LSM hooks with dentry, such as: security_inode_listxattr security_inode_permission and many more. Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240806230904.71194-3-song@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-08-07bpf: Move bpf_get_file_xattr to fs/bpf_fs_kfuncs.cSong Liu
We are putting all fs kfuncs in fs/bpf_fs_kfuncs.c. Move existing bpf_get_file_xattr to it. Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240806230904.71194-2-song@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-08-06Merge branch 'bpf-introduce-new-vfs-based-bpf-kfuncs'Alexei Starovoitov
Matt Bobrowski says: ==================== bpf: introduce new VFS based BPF kfuncs G'day! A respin based off v3, which can be found here [0]. Original motivations for introducing this suite of BPF kfuncs can be found here [1]. The primary difference in this version of the patch series is that the suite of VFS related BPF kfuncs added can be used from both sleepable and non-sleepable BPF LSM program types. IOW, the KF_SLEEPABLE annotation has been removed from all of them. Changes sinve v3: * KF_SLEEPABLE annotation has been dropped from all newly introduced VFS related BPF kfuncs. This includes bpf_get_task_exe_file(), bpf_put_file(), and bpf_path_d_path(). Both negative and positive selftests backing these new BPF kfuncs have also been updated accordingly. * buf__sz conditional in bpf_path_d_path() has been updated from buf__sz <= 0, to !buf__sz. * Syntax issues as reported so here [2] have been corrected. [0] https://lore.kernel.org/bpf/20240726085604.2369469-1-mattbobrowski@google.com/ [1] https://lore.kernel.org/bpf/cover.1708377880.git.mattbobrowski@google.com/#t [2] https://netdev.bots.linux.dev/static/nipa/874023/13742510/checkpatch/stdout ==================== Link: https://lore.kernel.org/r/20240731110833.1834742-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-08-06selftests/bpf: add positive tests for new VFS based BPF kfuncsMatt Bobrowski
Add a bunch of positive selftests which extensively cover the various contexts and parameters in which the new VFS based BPF kfuncs may be used from. Again, the following VFS based BPF kfuncs are thoroughly tested within this new selftest: * struct file *bpf_get_task_exe_file(struct task_struct *); * void bpf_put_file(struct file *); * int bpf_path_d_path(struct path *, char *, size_t); Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Link: https://lore.kernel.org/r/20240731110833.1834742-4-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-08-06selftests/bpf: add negative tests for new VFS based BPF kfuncsMatt Bobrowski
Add a bunch of negative selftests responsible for asserting that the BPF verifier successfully rejects a BPF program load when the underlying BPF program misuses one of the newly introduced VFS based BPF kfuncs. The following VFS based BPF kfuncs are extensively tested within this new selftest: * struct file *bpf_get_task_exe_file(struct task_struct *); * void bpf_put_file(struct file *); * int bpf_path_d_path(struct path *, char *, size_t); Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Link: https://lore.kernel.org/r/20240731110833.1834742-3-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-08-06bpf: introduce new VFS based BPF kfuncsMatt Bobrowski
Add a new variant of bpf_d_path() named bpf_path_d_path() which takes the form of a BPF kfunc and enforces KF_TRUSTED_ARGS semantics onto its arguments. This new d_path() based BPF kfunc variant is intended to address the legacy bpf_d_path() BPF helper's susceptability to memory corruption issues [0, 1, 2] by ensuring to only operate on supplied arguments which are deemed trusted by the BPF verifier. Typically, this means that only pointers to a struct path which have been referenced counted may be supplied. In addition to the new bpf_path_d_path() BPF kfunc, we also add a KF_ACQUIRE based BPF kfunc bpf_get_task_exe_file() and KF_RELEASE counterpart BPF kfunc bpf_put_file(). This is so that the new bpf_path_d_path() BPF kfunc can be used more flexibily from within the context of a BPF LSM program. It's rather common to ascertain the backing executable file for the calling process by performing the following walk current->mm->exe_file while instrumenting a given operation from the context of the BPF LSM program. However, walking current->mm->exe_file directly is never deemed to be OK, and doing so from both inside and outside of BPF LSM program context should be considered as a bug. Using bpf_get_task_exe_file() and in turn bpf_put_file() will allow BPF LSM programs to reliably get and put references to current->mm->exe_file. As of now, all the newly introduced BPF kfuncs within this patch are limited to BPF LSM program types. These can be either sleepable or non-sleepable variants of BPF LSM program types. [0] https://lore.kernel.org/bpf/CAG48ez0ppjcT=QxU-jtCUfb5xQb3mLr=5FcwddF_VKfEBPs_Dg@mail.gmail.com/ [1] https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org/ [2] https://lore.kernel.org/bpf/20220219113744.1852259-1-memxor@gmail.com/ Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240731110833.1834742-2-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-08-02selftests/bpf: Fix a btf_dump selftest failureYonghong Song
Jakub reported bpf selftest "btf_dump" failure after forwarding to v6.11-rc1 with netdev. Error: #33 btf_dump Error: #33/15 btf_dump/btf_dump: var_data btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0 The reason for the failure is due to commit 94ede2a3e913 ("profiling: remove stale percpu flip buffer variables") where percpu static variable "cpu_profile_flip" is removed. Let us replace "cpu_profile_flip" with a variable in bpf subsystem so whenever that variable gets deleted or renamed, we can detect the failure immediately. In this case, I picked a static percpu variable "bpf_cgrp_storage_busy" which is defined in kernel/bpf/bpf_cgrp_storage.c. Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240802185434.1749056-1-yonghong.song@linux.dev
2024-07-31Merge branch 'selftests/bpf: convert test_dev_cgroup to test_progs'Martin KaFai Lau
Alexis Lothoré (eBPF Foundation) says: ==================== Hello, this small series aims to integrate test_dev_cgroup in test_progs so it could be run automatically in CI. The new version brings a few differences with the current one: - test now uses directly syscalls instead of wrapping commandline tools into system() calls - test_progs manipulates /dev/null (eg: redirecting test logs into it), so disabling access to it in the bpf program confuses the tests. To fix this, the first commit modifies the bpf program to allow access to char devices 1:3 (/dev/null), and disable access to char devices 1:5 (/dev/zero) - once test is converted, add a small subtest to also check for device type interpretation (char or block) - paths used in mknod tests are now in /dev instead of /tmp: due to the CI runner organisation and mountpoints manipulations, trying to create nodes in /tmp leads to errors unrelated to the test (ie, mknod calls refused by kernel, not the bpf program). I don't understand exactly the root cause at the deepest point (all I see in CI is an -ENXIO error on mknod when trying to create the node in tmp, and I can not make sense out of it neither replicate it locally), so I would gladly take inputs from anyone more educated than me about this. The new test_progs part has been tested in a local qemu environment as well as in upstream CI: ./test_progs -a cgroup_dev 47/1 cgroup_dev/allow-mknod:OK 47/2 cgroup_dev/allow-read:OK 47/3 cgroup_dev/allow-write:OK 47/4 cgroup_dev/deny-mknod:OK 47/5 cgroup_dev/deny-read:OK 47/6 cgroup_dev/deny-write:OK 47/7 cgroup_dev/deny-mknod-wrong-type:OK 47 cgroup_dev:OK Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED --- Changes in v4: - Fix mixup between ret and errno by testing both - Properly apply ack tag from Stanislas - Link to v3: https://lore.kernel.org/r/20240730-convert_dev_cgroup-v3-0-93e573b74357@bootlin.com Changes in v3: - delete mknod file only if it has been created - use bpf_program__attach_cgroup() instead of bpf_prog_attach - reorganize subtests order - collect review/ack tags from Alan and Stanislas - Link to v2: https://lore.kernel.org/r/20240729-convert_dev_cgroup-v2-0-4c1fc0520545@bootlin.com Changes in v2: - directly pass expected ret code to subtests instead of boolean pass/not pass - fix faulty fd check in subtest expected to fail on open - fix wrong subtest name - pass test buffer and corresponding size to read/write subtests - use correct series prefix - Link to v1: https://lore.kernel.org/r/20240725-convert_dev_cgroup-v1-0-2c8cbd487c44@bootlin.com ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-07-31selftests/bpf: add wrong type test to cgroup devAlexis Lothoré (eBPF Foundation)
Current cgroup_dev test mostly tests that device operation is accepted or refused base on passed major/minor (and so, any operation performed during test involves only char device) Add a small subtest ensuring that the device type passed to bpf program allows it to take decisions as well. Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-3-849425d90de6@bootlin.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-07-31selftests/bpf: convert test_dev_cgroup to test_progsAlexis Lothoré (eBPF Foundation)
test_dev_cgroup is defined as a standalone test program, and so is not executed in CI. Convert it to test_progs framework so it is tested automatically in CI, and remove the old test. In order to be able to run it in test_progs, /dev/null must remain usable, so change the new test to test operations on devices 1:3 as valid, and operations on devices 1:5 (/dev/zero) as invalid. Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-2-849425d90de6@bootlin.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-07-31selftests/bpf: do not disable /dev/null device access in cgroup dev testAlexis Lothoré (eBPF Foundation)
test_dev_cgroup currently loads a small bpf program allowing any access on urandom and zero devices, disabling access to any other device. It makes migrating this test to test_progs impossible, since this one manipulates extensively /dev/null. Allow /dev/null manipulation in dev_cgroup program to make its usage in test_progs framework possible. Update test_dev_cgroup.c as well to match this change while it has not been removed. Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-1-849425d90de6@bootlin.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-07-30selftests/bpf: fix RELEASE=1 compilation for sock_addr.cAndrii Nakryiko
When building selftests with RELEASE=1 using GCC compiler, it complaints about uninitialized err. Fix the problem. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240730231805.1933923-1-andrii@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-07-30xsk: Try to make xdp_umem_reg extension a bit more future-proofStanislav Fomichev
We recently found out that extending xsk_umem_reg might be a bit complicated due to not enforcing padding to be zero [0]. Add a couple of things to make it less error-prone: 1. Remove xdp_umem_reg_v2 since its sizeof is the same as xdp_umem_reg 2. Add BUILD_BUG_ON that checks that the size of xdp_umem_reg_v1 is less than xdp_umem_reg; presumably, when we get to v2, there is gonna be a similar line to enforce that sizeof(v2) > sizeof(v1) 3. Add BUILD_BUG_ON to make sure the last field plus its size matches the overall struct size. The intent is to demonstrate that we don't have any lingering padding. 0: https://lore.kernel.org/bpf/ZqI29QE+5JnkdPmE@boxer/T/#me03113f7c2458fd08f3c4114a7a9472ac3646c98 Reported-by: Julian Schindel <mail@arctic-alpaca.de> Cc: Magnus Karlsson <magnus.karlsson@gmail.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/r/20240726222048.1397869-1-sdf@fomichev.me Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-07-30bpf: kprobe: Remove unused declaring of bpf_kprobe_overrideMenglong Dong
After the commit 66665ad2f102 ("tracing/kprobe: bpf: Compare instruction pointer with original one"), "bpf_kprobe_override" is not used anywhere anymore, and we can remove it now. Fixes: 66665ad2f102 ("tracing/kprobe: bpf: Compare instruction pointer with original one") Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240730053733.885785-1-dongml2@chinatelecom.cn
2024-07-30selftests/bpf: Fix error compiling tc_redirect.c with musl libcTony Ambardar
Linux 5.1 implemented 64-bit time types and related syscalls to address the Y2038 problem generally across archs. Userspace handling of Y2038 varies with the libc however. While musl libc uses 64-bit time across all 32-bit and 64-bit platforms, GNU glibc uses 64-bit time on 64-bit platforms but defaults to 32-bit time on 32-bit platforms unless they "opt-in" to 64-bit time or explicitly use 64-bit syscalls and time structures. One specific area is the standard setsockopt() call, SO_TIMESTAMPNS option used for timestamping, and the related output 'struct timespec'. GNU glibc defaults as above, also exposing the SO_TIMESTAMPNS_NEW flag to explicitly use a 64-bit call and 'struct __kernel_timespec'. Since these are not exposed or needed with musl libc, their use in tc_redirect.c leads to compile errors building for mips64el/musl: tc_redirect.c: In function 'rcv_tstamp': tc_redirect.c:425:32: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'? 425 | cmsg->cmsg_type == SO_TIMESTAMPNS_NEW) | ^~~~~~~~~~~~~~~~~~ | SO_TIMESTAMPNS tc_redirect.c:425:32: note: each undeclared identifier is reported only once for each function it appears in tc_redirect.c: In function 'test_inet_dtime': tc_redirect.c:491:49: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'? 491 | err = setsockopt(listen_fd, SOL_SOCKET, SO_TIMESTAMPNS_NEW, | ^~~~~~~~~~~~~~~~~~ | SO_TIMESTAMPNS However, using SO_TIMESTAMPNS_NEW isn't strictly needed, nor is Y2038 being explicitly tested. The timestamp checks in tc_redirect.c are simple: the packet receive timestamp is non-zero and processed/handled in less than 5 seconds. Switch to using the standard setsockopt() call and SO_TIMESTAMPNS option to ensure compatibility across glibc and musl libc. In the worst-case, there is a 5-second window 14 years from now where tc_redirect tests may fail on 32-bit systems. However, we should reasonably expect glibc to adopt a 64-bit mandate rather than the current "opt-in" policy before the Y2038 roll-over. Fixes: ce6f6cffaeaa ("selftests/bpf: Wait for the netstamp_needed_key static key to be turned on") Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/031d656c058b4e55ceae56ef49c4e1729b5090f3.1722244708.git.tony.ambardar@gmail.com
2024-07-30selftests/bpf: Fix using stdout, stderr as struct field namesTony Ambardar
Typically stdin, stdout, stderr are treated as reserved identifiers under ISO/ANSI C and libc implementations further define these as macros, both in glibc and musl <stdio.h>. However, while glibc defines: ... /* Standard streams. */ extern FILE *stdin; /* Standard input stream. */ extern FILE *stdout; /* Standard output stream. */ extern FILE *stderr; /* Standard error output stream. */ /* C89/C99 say they're macros. Make them happy. */ #define stdin stdin #define stdout stdout #define stderr stderr ... musl instead uses (legally): ... extern FILE *const stdin; extern FILE *const stdout; extern FILE *const stderr; #define stdin (stdin) #define stdout (stdout) #define stderr (stderr) ... The latter results in compile errors when the names are reused as fields of 'struct test_env' and elsewhere in test_progs.[ch] and reg_bounds.c. Rename the fields to stdout_saved and stderr_saved to avoid many errors seen building against musl, e.g.: In file included from test_progs.h:6, from test_progs.c:5: test_progs.c: In function 'print_test_result': test_progs.c:237:21: error: expected identifier before '(' token 237 | fprintf(env.stdout, "#%-*d %s:", TEST_NUM_WIDTH, test->test_num, test->test_name); | ^~~~~~ test_progs.c:237:9: error: too few arguments to function 'fprintf' 237 | fprintf(env.stdout, "#%-*d %s:", TEST_NUM_WIDTH, test->test_num, test->test_name); | ^~~~~~~ Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/ZqR2DuHdBXPX%2Fyx8@kodidev-ubuntu/ Link: https://lore.kernel.org/bpf/684ea17548e237f39dfb3f7a3d33450069015b21.1722244708.git.tony.ambardar@gmail.com
2024-07-30selftests/bpf: Fix compile if backtrace support missing in libcTony Ambardar
Include GNU <execinfo.h> header only with glibc and provide weak, stubbed backtrace functions as a fallback in test_progs.c. This allows for non-GNU replacements while avoiding compile errors (e.g. with musl libc) like: test_progs.c:13:10: fatal error: execinfo.h: No such file or directory 13 | #include <execinfo.h> /* backtrace */ | ^~~~~~~~~~~~ test_progs.c: In function 'crash_handler': test_progs.c:1034:14: error: implicit declaration of function 'backtrace' [-Werror=implicit-function-declaration] 1034 | sz = backtrace(bt, ARRAY_SIZE(bt)); | ^~~~~~~~~ test_progs.c:1045:9: error: implicit declaration of function 'backtrace_symbols_fd' [-Werror=implicit-function-declaration] 1045 | backtrace_symbols_fd(bt, sz, STDERR_FILENO); | ^~~~~~~~~~~~~~~~~~~~ Fixes: 9fb156bb82a3 ("selftests/bpf: Print backtrace on SIGSEGV in test_progs") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/aa6dc8e23710cb457b278039d0081de7e7b4847d.1722244708.git.tony.ambardar@gmail.com
2024-07-30selftests/bpf: Fix redefinition errors compiling lwt_reroute.cTony Ambardar
Compiling lwt_reroute.c with GCC 12.3 for mips64el/musl-libc yields errors: In file included from .../include/arpa/inet.h:9, from ./test_progs.h:18, from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:11, from tools/testing/selftests/bpf/prog_tests/lwt_reroute.c:52: .../include/netinet/in.h:23:8: error: redefinition of 'struct in6_addr' 23 | struct in6_addr { | ^~~~~~~~ In file included from .../include/linux/icmp.h:24, from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:9: .../include/linux/in6.h:33:8: note: originally defined here 33 | struct in6_addr { | ^~~~~~~~ .../include/netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6' 34 | struct sockaddr_in6 { | ^~~~~~~~~~~~ .../include/linux/in6.h:50:8: note: originally defined here 50 | struct sockaddr_in6 { | ^~~~~~~~~~~~ .../include/netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq' 42 | struct ipv6_mreq { | ^~~~~~~~~ .../include/linux/in6.h:60:8: note: originally defined here 60 | struct ipv6_mreq { | ^~~~~~~~~ These errors occur because <linux/in6.h> is included before <netinet/in.h>, bypassing the Linux uapi/libc compat mechanism's partial musl support. As described in [1] and [2], fix these errors by including <netinet/in.h> in lwt_reroute.c before any uapi headers. [1]: commit c0bace798436 ("uapi libc compat: add fallback for unsupported libcs") [2]: https://git.musl-libc.org/cgit/musl/commit/?id=04983f227238 Fixes: 6c77997bc639 ("selftests/bpf: Add lwt_xmit tests for BPF_REROUTE") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/bd2908aec0755ba8b75f5dc41848b00585f5c73e.1722244708.git.tony.ambardar@gmail.com
2024-07-30selftests/bpf: Fix C++ compile error from missing _Bool typeTony Ambardar
While building, bpftool makes a skeleton from test_core_extern.c, which itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton test_core_extern.skel.h generated *does not* include <stdbool.h> or use the 'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp with g++ 12.3 for mips64el/musl-libc then fails with error: In file included from test_cpp.cpp:9: test_core_extern.skel.h:45:17: error: '_Bool' does not name a type 45 | _Bool CONFIG_BOOL; | ^~~~~ This was likely missed previously because glibc uses a GNU extension for <stdbool.h> with C++ (#define _Bool bool), not supported by musl libc. Normally, a C fragment would include <stdbool.h> and use the 'bool' type, and thus cleanly work after import by C++. The ideal fix would be for 'bpftool gen skeleton' to output the correct type/include supporting C++, but in the meantime add a conditional define as above. Fixes: 7c8dce4b1661 ("bpftool: Make skeleton C code compilable with C++ compiler") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com
2024-07-30selftests/bpf: Fix error compiling test_lru_map.cTony Ambardar
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe, the sequencing can raise compile errors, so move the increment outside the macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc: In file included from test_lru_map.c:11: test_lru_map.c: In function 'sched_next_online': test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point] 129 | CPU_SET(next++, &cpuset); | ^ cc1: all warnings being treated as errors Fixes: 3fbfadce6012 ("bpf: Fix test_lru_sanity5() in test_lru_map.c") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com
2024-07-30selftests/bpf: Fix arg parsing in veristat, test_progsTony Ambardar
Current code parses arguments with strtok_r() using a construct like char *state = NULL; while ((next = strtok_r(state ? NULL : input, ",", &state))) { ... } where logic assumes the 'state' var can distinguish between first and subsequent strtok_r() calls, and adjusts parameters accordingly. However, 'state' is strictly internal context for strtok_r() and no such assumptions are supported in the man page. Moreover, the exact behaviour of 'state' depends on the libc implementation, making the above code fragile. Indeed, invoking "./test_progs -t <test_name>" on mips64el/musl will hang, with the above code in an infinite loop. Similarly, we see strange behaviour running 'veristat' on mips64el/musl: $ ./veristat -e file,prog,verdict,insns -C two-ok add-failure Can't specify more than 9 stats Rewrite code using a counter to distinguish between strtok_r() calls. Fixes: 61ddff373ffa ("selftests/bpf: Improve by-name subtest selection logic in prog_tests") Fixes: 394169b079b5 ("selftests/bpf: add comparison mode to veristat") Fixes: c8bc5e050976 ("selftests/bpf: Add veristat tool for mass-verifying BPF object files") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/392d8bf5559f85fa37926c1494e62312ef252c3d.1722244708.git.tony.ambardar@gmail.com
2024-07-30selftests/bpf: Use portable POSIX basename()Tony Ambardar
Use the POSIX version of basename() to allow compilation against non-gnu libc (e.g. musl). Include <libgen.h> ahead of <string.h> to enable using functions from the latter while preferring POSIX over GNU basename(). In veristat.c, rely on strdupa() to avoid basename() altering the passed "const char" argument. This is not needed in xskxceiver.c since the arg is mutable and the program exits immediately after usage. Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/0fd3c9f3c605e6cba33504213c9df287817ade04.1722244708.git.tony.ambardar@gmail.com
2024-07-30tools/bpf: Fix the wrong format specifierZhu Jun
The format specifier of "unsigned int" in printf() should be "%u", not "%d". Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Quentin Monnet <qmo@kernel.org> Link: https://lore.kernel.org/bpf/20240724111120.11625-1-zhujun2@cmss.chinamobile.com
2024-07-29selftests/bpf: Load struct_ops map in global_maps_resize testDavid Vernet
In prog_tests/test_global_maps_resize.c, we test various use cases for resizing global maps. Commit 7244100e0389 ("libbpf: Don't take direct pointers into BTF data from st_ops") updated libbpf to not store pointers to volatile BTF data, which for some users, was causing a UAF when resizing a datasec array. Let's ensure we have coverage for resizing datasec arrays with struct_ops progs by also including a struct_ops map and struct_ops prog in the test_global_map_resize skeleton. The map is automatically loaded, so we don't need to do anything other than add it to the BPF prog being tested to get the coverage. Signed-off-by: David Vernet <void@manifault.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240725032214.50676-1-void@manifault.com
2024-07-29selftests/bpf: Integrate test_xdp_veth into test_progsAlexis Lothoré (eBPF Foundation)
test_xdp_veth.sh tests that XDP return codes work as expected, by bringing up multiple veth pairs isolated in different namespaces, attaching specific xdp programs to each interface, and ensuring that the whole chain allows to ping one end interface from the first one. The test runs well but is currently not integrated in test_progs, which prevents it from being run automatically in the CI infrastructure. Rewrite it as a C test relying on libbpf to allow running it in the CI infrastructure. The new code brings up the same network infrastructure and reuses the same eBPF programs as test_xdp_veth.sh, for which skeletons are already generated by the bpf tests makefile. Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-2-23bdba21b2f9@bootlin.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2024-07-29selftests/bpf: Update xdp_redirect_map prog sections for libbpfAlexis Lothoré (eBPF Foundation)
xdp_redirect_map.c is a bpf program used by test_xdp_veth.sh, which is not handled by the generic test runner (test_progs). To allow converting this test to test_progs, the corresponding program must be updated to allow handling it through skeletons generated by bpftool and libbpf. Update programs section names to allow to manipulate those with libbpf. Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-1-23bdba21b2f9@bootlin.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2024-07-29libbpf: Don't take direct pointers into BTF data from st_opsDavid Vernet
In struct bpf_struct_ops, we have take a pointer to a BTF type name, and a struct btf_type. This was presumably done for convenience, but can actually result in subtle and confusing bugs given that BTF data can be invalidated before a program is loaded. For example, in sched_ext, we may sometimes resize a data section after a skeleton has been opened, but before the struct_ops scheduler map has been loaded. This may cause the BTF data to be realloc'd, which can then cause a UAF when loading the program because the struct_ops map has pointers directly into the BTF data. We're already storing the BTF type_id in struct bpf_struct_ops. Because type_id is stable, we can therefore just update the places where we were looking at those pointers to instead do the lookups we need from the type_id. Fixes: 590a00888250 ("bpf: libbpf: Add STRUCT_OPS support") Signed-off-by: David Vernet <void@manifault.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240724171459.281234-1-void@manifault.com
2024-07-29Merge branch 'selftests-bpf-improve-libc-portability-musl-support-part-1'Andrii Nakryiko
Tony Ambardar says: ==================== selftests/bpf: Improve libc portability / musl support (part 1) Hello all, This series includes the bulk of libc-related compile fixes accumulated to support systems using musl, with smaller numbers to follow. These patches are simple and straightforward, and the series has been tested with the kernel-patches/bpf CI and locally using mips64el-gcc/musl-libc and QEMU with an OpenWrt rootfs. The patches address a few general categories of libc portability issues: - missing, redundant or incorrect include headers - disabled GNU header extensions (i.e. missing #define _GNU_SOURCE) - issues with types and casting Feedback and suggestions for improvement are welcome! Thanks, Tony ==================== Link: https://lore.kernel.org/r/cover.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2024-07-29selftests/bpf: Fix errors compiling cg_storage_multi.h with musl libcTony Ambardar
Remove a redundant include of '<asm/types.h>', whose needed definitions are already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c, cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids redefinition errors seen compiling for mips64el/musl-libc like: In file included from progs/cg_storage_multi_egress_only.c:13: In file included from progs/cg_storage_multi.h:6: In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23: /usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long') 29 | typedef __signed__ long __s64; | ^ /usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here 30 | __extension__ typedef __signed__ long long __s64; | ^ Fixes: 9e5bd1f7633b ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix errors compiling crypto_sanity.c with musl libcTony Ambardar
Remove a redundant include of '<linux/in6.h>', whose needed definitions are already provided by 'test_progs.h'. This avoids errors seen compiling for mips64el/musl-libc: In file included from .../arpa/inet.h:9, from ./test_progs.h:17, from prog_tests/crypto_sanity.c:10: .../netinet/in.h:23:8: error: redefinition of 'struct in6_addr' 23 | struct in6_addr { | ^~~~~~~~ In file included from crypto_sanity.c:7: .../linux/in6.h:33:8: note: originally defined here 33 | struct in6_addr { | ^~~~~~~~ .../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6' 34 | struct sockaddr_in6 { | ^~~~~~~~~~~~ .../linux/in6.h:50:8: note: originally defined here 50 | struct sockaddr_in6 { | ^~~~~~~~~~~~ .../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq' 42 | struct ipv6_mreq { | ^~~~~~~~~ .../linux/in6.h:60:8: note: originally defined here 60 | struct ipv6_mreq { | ^~~~~~~~~ Fixes: 91541ab192fc ("selftests: bpf: crypto skcipher algo selftests") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/bpf/911293968f424ad7b462d8805aeb3baee8f4985b.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix errors compiling decap_sanity.c with musl libcTony Ambardar
Remove a redundant include of '<linux/in6.h>', whose needed definitions are already provided by 'test_progs.h'. This avoids errors seen compiling for mips64el/musl-libc: In file included from .../arpa/inet.h:9, from ./test_progs.h:17, from prog_tests/decap_sanity.c:9: .../netinet/in.h:23:8: error: redefinition of 'struct in6_addr' 23 | struct in6_addr { | ^~~~~~~~ In file included from decap_sanity.c:7: .../linux/in6.h:33:8: note: originally defined here 33 | struct in6_addr { | ^~~~~~~~ .../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6' 34 | struct sockaddr_in6 { | ^~~~~~~~~~~~ .../linux/in6.h:50:8: note: originally defined here 50 | struct sockaddr_in6 { | ^~~~~~~~~~~~ .../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq' 42 | struct ipv6_mreq { | ^~~~~~~~~ .../linux/in6.h:60:8: note: originally defined here 60 | struct ipv6_mreq { | ^~~~~~~~~ Fixes: 70a00e2f1dba ("selftests/bpf: Test bpf_skb_adjust_room on CHECKSUM_PARTIAL") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/e986ba2d7edccd254b54f7cd049b98f10bafa8c3.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix errors compiling lwt_redirect.c with musl libcTony Ambardar
Remove a redundant include of '<linux/icmp.h>' which is already provided in 'lwt_helpers.h'. This avoids errors seen compiling for mips64el/musl-libc: In file included from .../arpa/inet.h:9, from lwt_redirect.c:51: .../netinet/in.h:23:8: error: redefinition of 'struct in6_addr' 23 | struct in6_addr { | ^~~~~~~~ In file included from .../linux/icmp.h:24, from lwt_redirect.c:50: .../linux/in6.h:33:8: note: originally defined here 33 | struct in6_addr { | ^~~~~~~~ .../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6' 34 | struct sockaddr_in6 { | ^~~~~~~~~~~~ .../linux/in6.h:50:8: note: originally defined here 50 | struct sockaddr_in6 { | ^~~~~~~~~~~~ .../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq' 42 | struct ipv6_mreq { | ^~~~~~~~~ .../linux/in6.h:60:8: note: originally defined here 60 | struct ipv6_mreq { | ^~~~~~~~~ Fixes: 43a7c3ef8a15 ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/3869dda876d5206d2f8d4dd67331c739ceb0c7f8.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix compiling core_reloc.c with musl-libcTony Ambardar
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h' header unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4: ./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t' 10 | loff_t off; | ^~~~~~ ./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t' 16 | loff_t off; | ^~~~~~ Fixes: 6bcd39d366b6 ("selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/11c3af75a7eb6bcb7ad9acfae6a6f470c572eb82.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix compiling tcp_rtt.c with musl-libcTony Ambardar
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by musl headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: tcp_rtt.c: In function 'wait_for_ack': tcp_rtt.c:24:25: error: storage size of 'info' isn't known 24 | struct tcp_info info; | ^~~~ tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable] cc1: all warnings being treated as errors Fixes: 1f4f80fed217 ("selftests/bpf: test_progs: convert test_tcp_rtt") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix compiling flow_dissector.c with musl-libcTony Ambardar
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest', which are not exposed by musl libc headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff' 118 | .tcp.doff = 5, | ^~~~ flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source' 119 | .tcp.source = 80, | ^~~~~~ flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest' 120 | .tcp.dest = 8080, | ^~~~ Fixes: ae173a915785 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix compiling kfree_skb.c with musl-libcTony Ambardar
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by musl headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: In file included from kfree_skb.c:2: kfree_skb.c: In function 'on_sample': kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff' 45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp", | ^ Fixes: 580d656d80cf ("selftests/bpf: Add kfree_skb raw_tp test") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/e2d8cedc790959c10d6822a51f01a7a3616bea1b.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix compiling parse_tcp_hdr_opt.c with musl-libcTony Ambardar
The GNU version of 'struct tcphdr', with members 'doff' and 'urg_ptr', is not exposed by musl headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: parse_tcp_hdr_opt.c:18:21: error: 'struct tcphdr' has no member named 'urg_ptr' 18 | .pk6_v6.tcp.urg_ptr = 123, | ^~~~~~~ parse_tcp_hdr_opt.c:19:21: error: 'struct tcphdr' has no member named 'doff' 19 | .pk6_v6.tcp.doff = 9, /* 16 bytes of options */ | ^~~~ Fixes: cfa7b011894d ("selftests/bpf: tests for using dynptrs to parse skb and xdp buffers") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/ac5440213c242c62cb4e0d9e0a9cd5058b6a31f6.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix include of <sys/fcntl.h>Tony Ambardar
Update ns_current_pid_tgid.c to use '#include <fcntl.h>' and avoid compile error against mips64el/musl libc: In file included from .../prog_tests/ns_current_pid_tgid.c:14: .../include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp] 1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> | ^~~~~~~ cc1: all warnings being treated as errors Fixes: 09c02d553c49 ("bpf, selftests: Fold test_current_pid_tgid_new_ns into test_progs.") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/8bdc869749177b575025bf69600a4ce591822609.1721713597.git.tony.ambardar@gmail.com
2024-07-29selftests/bpf: Fix missing BUILD_BUG_ON() declarationTony Ambardar
Explicitly include '<linux/build_bug.h>' to fix errors seen compiling with gcc targeting mips64el/musl-libc: user_ringbuf.c: In function 'test_user_ringbuf_loop': user_ringbuf.c:426:9: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration] 426 | BUILD_BUG_ON(total_samples <= c_max_entries); | ^~~~~~~~~~~~ cc1: all warnings being treated as errors Fixes: e5a9df51c746 ("selftests/bpf: Add selftests validating the user ringbuf") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/b28575f9221ec54871c46a2e87612bb4bbf46ccd.1721713597.git.tony.ambardar@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:16:01 +0000