summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-04ACPI: scan: Use the acpi_match_acpi_device() helperAndy Shevchenko
Instead of doing two pass parsing of the table, replace acpi_match_device_ids() with acpi_match_acpi_device(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-04ACPI: platform: Move SMB0001 HID to the header and reuseAndy Shevchenko
There are at least two places in the kernel that are using the SMB0001 HID. Make it to be available via acpi_drivers.h header file. While at it, replace hard coded one with a definition. Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Link: https://lore.kernel.org/r/20230621151652.79579-2-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-04ACPI: platform: Ignore SMB0001 only when it has resourcesAndy Shevchenko
After switching i2c-scmi driver to be a platform one, it stopped being enumerated on number of Kontron platforms, because it's listed in the forbidden_id_list. To resolve the situation, add a flag to driver data to allow devices with no resources in _CRS to be enumerated via platform bus. Fixes: 03d4287add6e ("i2c: scmi: Convert to be a platform driver") Closes: https://lore.kernel.org/r/60c1756765b9a3f1eab0dcbd84f59f00fe1caf48.camel@kontron.com Link: https://lore.kernel.org/r/20230621151652.79579-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> [ rjw: Move has_resource definition to the block in which it is used and initialize it to 'false' ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-04ACPI: bus: Introduce acpi_match_acpi_device() helperAndy Shevchenko
Match the ACPI device against a given list of ACPI IDs. Subsequent changes will make use of this. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [ rjw: Changelog edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-04module: fix init_module_from_file() error handlingLinus Torvalds
Vegard Nossum pointed out two different problems with the error handling in init_module_from_file(): (a) the idempotent loading code didn't clean up properly in some error cases, leaving the on-stack 'struct idempotent' element still in the hash table (b) failure to read the module file would nonsensically update the 'invalid_kread_bytes' stat counter with the error value The first error is quite nasty, in that it can then cause subsequent idempotent loads of that same file to access stale stack contents of the previous failure. The case may not happen in any normal situation (explaining all the "Tested-by's on the original change), and requires admin privileges, but syzkaller triggers random bad behavior as a result: BUG: soft lockup in sys_finit_module BUG: unable to handle kernel paging request in init_module_from_file general protection fault in init_module_from_file INFO: task hung in init_module_from_file KASAN: out-of-bounds Read in init_module_from_file KASAN: slab-out-of-bounds Read in init_module_from_file ... The second error is fairly benign and just leads to nonsensical stats (and has been around since the debug stats were added). Vegard also provided a patch for the idempotent loading issue, but I'd rather re-organize the code and make it more legible using another level of helper functions than add the usual "goto out" error handling. Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/ Fixes: 9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-04ACPI: scan: fix undeclared variable warnings by including sleep.hBen Dooks
There are two pieces of data being exported from drivers/acpi/scan.c (acpi_device_lock and acpi_wakeup_device_list) that don't have their definitions declared in anything scan.c is including. Fix the following sparse warnings by including sleep.h to add the declarations of acpi_device_lock and acpi_wakeup_device_list to fix the followng sparse warnings: drivers/acpi/scan.c:42:1: warning: symbol 'acpi_device_lock' was not declared. Should it be static? drivers/acpi/scan.c:43:1: warning: symbol 'acpi_wakeup_device_list' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-04Merge branches 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki
Merge CPU power management updates for 6.5-rc1: - Add missing __init annotation to one function in the intel_idle drvier (Rafael Wysocki). - Make intel_pstate use a correct scaling factor when mapping HWP performance levels to frequency values on hybrid-capable systems with disabled E-cores (Srinivas Pandruvada). - Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh Kumar). - Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang). - Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar). - Add support for TI's AM62A7 platform (Vibhore Vardhan). - Add support for Armada's ap807 platform (Russell King (Oracle)). - Add support for StarFive JH7110 SoC (Mason Huo). - Fix voltage selection for Mediatek Socs (Daniel Golle). - Fix error handling in Tegra's cpufreq driver (Christophe JAILLET). - Document Qualcomm's IPQ8074 in DT bindings (Robert Marko). - Don't warn for disabling a non-existing frequency for imx6q cpufreq driver (Christoph Niedermaier). - Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney). * pm-cpufreq: cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths cpufreq: mediatek: correct voltages for MT7622 and MT7623 cpufreq: armada-8k: add ap807 support cpufreq: dt-platdev: Support building as module dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074 cpufreq: dt-platdev: Blacklist ti,am62a7 SoC cpufreq: ti-cpufreq: Add support for AM62A7 cpufreq: imx6q: don't warn for disabling a non-existing frequency cpufreq: sparc: Don't allocate cpufreq_driver dynamically cpufreq: tegra194: Fix an error handling path in tegra194_cpufreq_probe() cpufreq: dt-platdev: Add JH7110 SOC to the allowlist * pm-cpuidle: intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
2023-07-04RISC-V: drop error print from riscv_hartid_to_cpuid()Conor Dooley
As of commit 2ac874343749 ("RISC-V: split early & late of_node to hartid mapping") my CI complains about newly added pr_err() messages during boot, for example: [ 0.000000] Couldn't find cpu id for hartid [0] [ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller Before the split, riscv_of_processor_hartid() contained a check for whether the cpu was "available", before calling riscv_hartid_to_cpuid(), but after the split riscv_of_processor_hartid() can be called for cpus that are disabled. Most callers of riscv_hartid_to_cpuid() already report custom errors where it falls, making this print superfluous in those case. In other places, the print adds nothing - see riscv_intc_init() for example. Fixes: 2ac874343749 ("RISC-V: split early & late of_node to hartid mapping") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230629-paternity-grafted-b901b76d04a0@wendy Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-04riscv: Discard vector state on syscallsBjörn Töpel
The RISC-V vector specification states: Executing a system call causes all caller-saved vector registers (v0-v31, vl, vtype) and vstart to become unspecified. The vector registers are set to all 1s, vill is set (invalid), and the vector status is set to Dirty. That way we can prevent userspace from accidentally relying on the stated save. Rémi pointed out [1] that writing to the registers might be superfluous, and setting vill is sufficient. Link: https://lore.kernel.org/linux-riscv/12784326.9UPPK3MAeB@basile.remlab.net/ # [1] Suggested-by: Darius Rad <darius@bluespec.com> Suggested-by: Palmer Dabbelt <palmer@rivosinc.com> Suggested-by: Rémi Denis-Courmont <remi@remlab.net> Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230629142228.1125715-1-bjorn@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-04riscv: move memblock_allow_resize() after linear mapping is readyWoody Zhang
The initial memblock metadata is accessed from kernel image mapping. The regions arrays need to "reallocated" from memblock and accessed through linear mapping to cover more memblock regions. So the resizing should not be allowed until linear mapping is ready. Note that there are memblock allocations when building linear mapping. This patch is similar to 24cc61d8cb5a ("arm64: memblock: don't permit memblock resizing until linear mapping is up"). In following log, many memblock regions are reserved before create_linear_mapping_page_table(). And then it triggered reallocation of memblock.reserved.regions and memcpy the old array in kernel image mapping to the new array in linear mapping which caused a page fault. [ 0.000000] memblock_reserve: [0x00000000bf01f000-0x00000000bf01ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf021000-0x00000000bf021fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf023000-0x00000000bf023fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf025000-0x00000000bf025fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf027000-0x00000000bf027fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf029000-0x00000000bf029fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf02b000-0x00000000bf02bfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf02d000-0x00000000bf02dfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf02f000-0x00000000bf02ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf030000-0x00000000bf030fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) map non-reusable mmode_resv0@80000000 [ 0.000000] memblock_reserve: [0x00000000bf000000-0x00000000bf001fed] paging_init+0x19a/0x5ae [ 0.000000] memblock_phys_alloc_range: 4096 bytes align=0x1000 from=0x0000000000000000 max_addr=0x0000000000000000 alloc_pmd_fixmap+0x14/0x1c [ 0.000000] memblock_reserve: [0x000000017ffff000-0x000000017fffffff] memblock_alloc_range_nid+0xb8/0x128 [ 0.000000] memblock: reserved is doubled to 256 at [0x000000017fffd000-0x000000017fffe7ff] [ 0.000000] Unable to handle kernel paging request at virtual address ff600000ffffd000 [ 0.000000] Oops [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.4.0-rc1-00011-g99a670b2069c #66 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] epc : __memcpy+0x60/0xf8 [ 0.000000] ra : memblock_double_array+0x192/0x248 [ 0.000000] epc : ffffffff8081d214 ra : ffffffff80a3dfc0 sp : ffffffff81403bd0 [ 0.000000] gp : ffffffff814fbb38 tp : ffffffff8140dac0 t0 : 0000000001600000 [ 0.000000] t1 : 0000000000000000 t2 : 000000008f001000 s0 : ffffffff81403c60 [ 0.000000] s1 : ffffffff80c0bc98 a0 : ff600000ffffd000 a1 : ffffffff80c0bcd8 [ 0.000000] a2 : 0000000000000c00 a3 : ffffffff80c0c8d8 a4 : 0000000080000000 [ 0.000000] a5 : 0000000000080000 a6 : 0000000000000000 a7 : 0000000080200000 [ 0.000000] s2 : ff600000ffffd000 s3 : 0000000000002000 s4 : 0000000000000c00 [ 0.000000] s5 : ffffffff80c0bc60 s6 : ffffffff80c0bcc8 s7 : 0000000000000000 [ 0.000000] s8 : ffffffff814fd0a8 s9 : 000000017fffe7ff s10: 0000000000000000 [ 0.000000] s11: 0000000000001000 t3 : 0000000000001000 t4 : 0000000000000000 [ 0.000000] t5 : 000000008f003000 t6 : ff600000ffffd000 [ 0.000000] status: 0000000200000100 badaddr: ff600000ffffd000 cause: 000000000000000f [ 0.000000] [<ffffffff8081d214>] __memcpy+0x60/0xf8 [ 0.000000] [<ffffffff80a3e1a2>] memblock_add_range.isra.14+0x12c/0x162 [ 0.000000] [<ffffffff80a3e36a>] memblock_reserve+0x6e/0x8c [ 0.000000] [<ffffffff80a123fc>] memblock_alloc_range_nid+0xb8/0x128 [ 0.000000] [<ffffffff80a1256a>] memblock_phys_alloc_range+0x5e/0x6a [ 0.000000] [<ffffffff80a04732>] alloc_pmd_fixmap+0x14/0x1c [ 0.000000] [<ffffffff80a0475a>] alloc_p4d_fixmap+0xc/0x14 [ 0.000000] [<ffffffff80a04a36>] create_pgd_mapping+0x98/0x17c [ 0.000000] [<ffffffff80a04e9e>] create_linear_mapping_range.constprop.10+0xe4/0x112 [ 0.000000] [<ffffffff80a05bb8>] paging_init+0x3ec/0x5ae [ 0.000000] [<ffffffff80a03354>] setup_arch+0xb2/0x576 [ 0.000000] [<ffffffff80a00726>] start_kernel+0x72/0x57e [ 0.000000] Code: b303 0285 b383 0305 be03 0385 be83 0405 bf03 0485 (b023) 00ef [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- Fixes: 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") Signed-off-by: Woody Zhang <woodylab@foxmail.com> Tested-by: Song Shuai <songshuaishuai@tinylab.org> Link: https://lore.kernel.org/r/tencent_FBB94CE615C5CCE7701CD39C15CCE0EE9706@qq.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-04riscv: Enable ARCH_SUSPEND_POSSIBLE for s2idleSong Shuai
With this configuration opened, the basic platform-independent s2idle is provided by the sole "s2idle" string in `/sys/power/mem_sleep`. At the end of s2idle, harts will hit the `wfi` instruction or enter the SUSPENDED state through the sbi_cpuidle driver. The interrupt of possible wakeup devices will be kept to wake the system up. And platform-specific sleep states can be provided by future ACPI and SBI SUSP extension support. Signed-off-by: Song Shuai <songshuaishuai@tinylab.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20230529101524.322076-1-songshuaishuai@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-04clk: tegra: Avoid calling an uninitialized functionThierry Reding
Commit 493ffb046cf5 ("clk: tegra: super: Switch to determine_rate") replaced clk_super_round_rate() by clk_super_determine_rate(), but didn't update one callsite that was explicitly calling the old tegra_clk_super_ops.round_rate() function, which was now NULL. This resulted in a crash on Tegra30 systems during early boot. Switch this callsite over to the clk_super_determine_rate() equivalent to avoid the crash. Fixes: 493ffb046cf5 ("clk: tegra: super: Switch to determine_rate") Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230630130748.840729-1-thierry.reding@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-07-04riscv: vdso: include vdso/vsyscall.h for vdso_dataBen Dooks
Add include of <vdso/vsyscall.h> to pull in the defition of vdso_data to remove the following sparse warning: arch/riscv/kernel/vdso.c:39:18: warning: symbol 'vdso_data' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20230616114357.159601-1-ben.dooks@codethink.co.uk Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-04scripts: kernel-doc: support private / public marking for enumsJakub Kicinski
Enums benefit from private markings, too. For netlink attribute name enums always end with a pair of __$n_MAX and $n_MAX members. Documenting them feels a bit tedious. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20230621223525.2722703-1-kuba@kernel.org>
2023-07-04Documentation: KVM: SEV: add a missing backtickChangyuan Lyu
``ENOTTY` -> ``ENOTTY``. Signed-off-by: Changyuan Lyu <changyuanl@google.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20230624165858.21777-1-changyuanl@google.com>
2023-07-04Documentation: ACPI: fix typo in ssdt-overlays.rstDavid Heidelberg
Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20230625103305.115484-1-david@ixit.cz>
2023-07-04Fix documentation of panic_on_warnOlaf Hering
The kernel cmdline option panic_on_warn expects an integer, it is not a plain option as documented. A number of uses in the tree figured this already, and use panic_on_warn=1 for their purpose. Adjust a comment which otherwise may mislead people in the future. Fixes: 9e3961a09798 ("kernel: add panic_on_warn") Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-07-04mm: don't do validate_mm() unnecessarily and without mmap lockingLinus Torvalds
This is an addition to commit ae80b4041984 ("mm: validate the mm before dropping the mmap lock"), because it turns out there were two problems, but lockdep just stopped complaining after finding the first one. The do_vmi_align_munmap() function now drops the mmap lock after doing the validate_mm() call, but it turns out that one of the callers then immediately calls validate_mm() again. That's both a bit silly, and now (again) happens without the mmap lock held. So just remove that validate_mm() call from the caller, but make sure to not lose any coverage by doing that mm sanity checking in the error path of do_vmi_align_munmap() too. Reported-and-tested-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/ZKN6CdkKyxBShPHi@xsang-OptiPlex-9020/ Fixes: 408579cd627a ("mm: Update do_vmi_align_munmap() return semantics") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-04spi: bcm{63xx,bca}-hsspi: update my email addressJonas Gorski
Update my email address to a working one, as the openwrt.org one is broken since ages. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: William Zhang <william.zhang@broadcom.com> Link: https://lore.kernel.org/r/20230630202257.8449-2-jonas.gorski@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-04fanotify: disallow mount/sb marks on kernel internal pseudo fsAmir Goldstein
Hopefully, nobody is trying to abuse mount/sb marks for watching all anonymous pipes/inodes. I cannot think of a good reason to allow this - it looks like an oversight that dated back to the original fanotify API. Link: https://lore.kernel.org/linux-fsdevel/20230628101132.kvchg544mczxv2pm@quack3/ Fixes: 0ff21db9fcc3 ("fanotify: hooks the fanotify_mark syscall to the vfsmount code") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230629042044.25723-1-amir73il@gmail.com>
2023-07-04drm/i915: use mock device info for creating mock deviceJani Nikula
Instead of modifying the device info on the fly, use static const mock device info. It's not okay to modify device info at runtime; we've added separate runtime info for info that needs to be modified at runtime. We've added safeguards to device info to prevent it from being modified, but commit 5e352e32aec2 ("drm/i915: preparation for using PAT index") just cast the const away and modified it anyway. This prevents device info from being moved to rodata. Fixes: 5e352e32aec2 ("drm/i915: preparation for using PAT index") Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Fei Yang <fei.yang@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b0db62045a96a3fd4cf123685da88cc777f9b485.1687878757.git.jani.nikula@intel.com (cherry picked from commit ecc7a3ce078a209a62af4c53ffb7370620f65c24) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-04drm/i915/psr: Fix BDW PSR AUX CH data register offsetsVille Syrjälä
The multiplication got replaced by an addition in some cleanup. This means we never write the correct data to some of the BDW PSR data registers and thus we fail to actually wake up the panel from PSR. Fixes: 4ab4fa103217 ("drm/i915/psr: Make PSR registers relative to transcoders") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-3-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com> (cherry picked from commit 460dc4ba1442b3e5e543328d11db2702b98d3d7c) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-04net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EXLin Ma
The attribute TCA_PEDIT_PARMS_EX is not be included in pedit_policy and one malicious user could fake a TCA_PEDIT_PARMS_EX whose length is smaller than the intended sizeof(struct tc_pedit). Hence, the dereference in tcf_pedit_init() could access dirty heap data. static int tcf_pedit_init(...) { // ... pattr = tb[TCA_PEDIT_PARMS]; // TCA_PEDIT_PARMS is included if (!pattr) pattr = tb[TCA_PEDIT_PARMS_EX]; // but this is not // ... parm = nla_data(pattr); index = parm->index; // parm is able to be smaller than 4 bytes // and this dereference gets dirty skb_buff // data created in netlink_sendmsg } This commit adds TCA_PEDIT_PARMS_EX length in pedit_policy which avoid the above case, just like the TCA_PEDIT_PARMS. Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230703110842.590282-1-linma@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-04fs: don't assume arguments are non-NULLChristian Brauner
The helper is explicitly documented as locking zero, one, or two arguments. While all current callers do pass non-NULL arguments there's no need or requirement for them to do so according to the code and the unlock_two_nondirectories() helper is pretty clear about it as well. So only call WARN_ON_ONCE() if the checked inode is valid. Fixes: 2454ad83b90a ("fs: Restrict lock_two_nondirectories() to non-directory inodes") Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jan Kara <jack@suse.cz> Message-Id: <20230703-vfs-rename-source-v1-2-37eebb29b65b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-07-04fs: no need to check sourceJan Kara
The @source inode must be valid. It is even checked via IS_SWAPFILE() above making it pretty clear. So no need to check it when we unlock. What doesn't need to exist is the @target inode. The lock_two_inodes() helper currently swaps the @inode1 and @inode2 arguments if @inode1 is NULL to have consistent lock class usage. However, we know that at least for vfs_rename() that @inode1 is @source and thus is never NULL as per above. We also know that @source is a different inode than @target as that is checked right at the beginning of vfs_rename(). So we know that @source is valid and locked and that @target is locked. So drop the check whether @source is non-NULL. Fixes: 28eceeda130f ("fs: Lock moved directories") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202307030026.9sE2pk2x-lkp@intel.com Message-Id: <20230703-vfs-rename-source-v1-1-37eebb29b65b@kernel.org> [brauner: use commit message from patch I sent concurrently] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-07-04xsk: Honor SO_BINDTODEVICE on bindIlya Maximets
Initial creation of an AF_XDP socket requires CAP_NET_RAW capability. A privileged process might create the socket and pass it to a non-privileged process for later use. However, that process will be able to bind the socket to any network interface. Even though it will not be able to receive any traffic without modification of the BPF map, the situation is not ideal. Sockets already have a mechanism that can be used to restrict what interface they can be attached to. That is SO_BINDTODEVICE. To change the SO_BINDTODEVICE binding the process will need CAP_NET_RAW. Make xsk_bind() honor the SO_BINDTODEVICE in order to allow safer workflow when non-privileged process is using AF_XDP. The intended workflow is following: 1. First process creates a bare socket with socket(AF_XDP, ...). 2. First process loads the XSK program to the interface. 3. First process adds the socket fd to a BPF map. 4. First process ties socket fd to a particular interface using SO_BINDTODEVICE. 5. First process sends socket fd to a second process. 6. Second process allocates UMEM. 7. Second process binds socket to the interface with bind(...). 8. Second process sends/receives the traffic. All the steps above are possible today if the first process is privileged and the second one has sufficient RLIMIT_MEMLOCK and no capabilities. However, the second process will be able to bind the socket to any interface it wants on step 7 and send traffic from it. With the proposed change, the second process will be able to bind the socket only to a specific interface chosen by the first process at step 4. Fixes: 965a99098443 ("xsk: add support for bind for Rx") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/bpf/20230703175329.3259672-1-i.maximets@ovn.org
2023-07-04ALSA: hda/realtek: Whitespace fixLuke D. Jones
Remove an erroneous whitespace. Fixes: 31278997add6 ("ALSA: hda/realtek - Add headset quirk for Dell DT") Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230704044619.19343-6-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-07-04ALSA: hda/realtek: Add quirk for ASUS ROG G614JxLuke D. Jones
Adds the required quirk to enable the Cirrus amp and correct pins on the ASUS ROG G614J series which uses an SPI connected Cirrus amp. While this works if the related _DSD properties are made available, these aren't included in the ACPI of these laptops (yet). Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230704044619.19343-5-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-07-04ALSA: hda/realtek: Amend G634 quirk to enable rear speakersLuke D. Jones
Amends the last quirk for the G634 with 0x1caf subsys to enable the rear speakers via pincfg. Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230704044619.19343-4-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-07-04ALSA: hda/realtek: Add quirk for ASUS ROG GA402XLuke D. Jones
Adds the required quirk to enable the Cirrus amp and correct pins on the ASUS ROG GA402X series which uses an I2C connected Cirrus amp. While this works if the related _DSD properties are made available, these aren't included in the ACPI of these laptops (yet). Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230704044619.19343-3-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-07-04ALSA: hda/realtek: Add quirk for ASUS ROG GX650PLuke D. Jones
Adds the required quirk to enable the Cirrus amp and correct pins on the ASUS ROG GV601V series which uses an I2C connected Cirrus amp. While this works if the related _DSD properties are made available, these aren't included in the ACPI of these laptops (yet). Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230704044619.19343-2-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-07-04Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"Alexander Gordeev
This reverts commit 456be42aa713e7f83b467db66ceae779431c7d9d. The assumption VMEM_MAX_PHYS should match ident_map_size is wrong. At least discontiguous saved segments (DCSS) could be loaded at addresses beyond ident_map_size and dcssblk device driver might fail as result. Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-07-04s390/cpum_sf: remove check on CPU being onlineThomas Richter
During sampling event initialization, a check is done if that particular CPU the event is to be installed on is actually online. This check is not necessary, as it is also performed in the system call entry point. Therefore remove this check. No functional change. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-07-04s390/cpum_sf: handle casts consistentlyThomas Richter
The casts are written in two different notations: (cast) expression and (cast)expression Convert statements with the first notation to the second notation. No functional change. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-07-04s390/cpum_sf: remove unnecessary debug statementThomas Richter
Remove debug_sprint_event() statement right after an pr_err() statement. No additional debug information is generated. No functional change. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-07-04s390/cpum_sf: remove parameter in call to pr_errThomas Richter
The op argument is hardcoded in the parameter list of function pr_err. Make the op code part of the text printed by pr_err. No functional change. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-07-04s390/cpum_sf: simplify function setup_pmu_cpuThomas Richter
Print the error message when the FAILURE flag is set. This saves on pr_err statement as the text of the error message is identical in both failures. Also observe reverse Xmas tree variable declarations in this function. No functional change. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-07-04s390/cpum_cf: remove unneeded debug statementsThomas Richter
Remove most debug statements which are not needed anymore from the CPU Measurement counter facility device driver. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-07-03arch/arm64/mm/fault: Fix undeclared variable error in do_page_fault()SeongJae Park
Commit ae870a68b5d1 ("arm64/mm: Convert to using lock_mm_and_find_vma()") made do_page_fault() to use 'vma' even if CONFIG_PER_VMA_LOCK is not defined, but the declaration is still in the ifdef. As a result, building kernel without the config fails with undeclared variable error as below: arch/arm64/mm/fault.c: In function 'do_page_fault': arch/arm64/mm/fault.c:624:2: error: 'vma' undeclared (first use in this function); did you mean 'vmap'? 624 | vma = lock_mm_and_find_vma(mm, addr, regs); | ^~~ | vmap Fix it by moving the declaration out of the ifdef. Fixes: ae870a68b5d1 ("arm64/mm: Convert to using lock_mm_and_find_vma()") Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-03Merge tag 'block-6.5-2023-07-03' of git://git.kernel.dk/linuxLinus Torvalds
Pull more block updates from Jens Axboe: "Mostly items that came in a bit late for the initial pull request, wanted to make sure they had the appropriate amount of linux-next soak before going upstream. Outside of stragglers, just generic fixes for either merge window items, or longer standing bugs" * tag 'block-6.5-2023-07-03' of git://git.kernel.dk/linux: (25 commits) md/raid0: add discard support for the 'original' layout nvme: disable controller on reset state failure nvme: sync timeout work on failed reset nvme: ensure unquiesce on teardown cdrom/gdrom: Fix build error nvme: improved uring polling block: add request polling helper nvme-mpath: fix I/O failure with EAGAIN when failing over I/O nvme: host: fix command name spelling blk-sysfs: add a new attr_group for blk_mq blk-iocost: move wbt_enable/disable_default() out of spinlock blk-wbt: cleanup rwb_enabled() and wbt_disabled() blk-wbt: remove dead code to handle wbt enable/disable with io inflight blk-wbt: don't create wbt sysfs entry if CONFIG_BLK_WBT is disabled blk-mq: fix two misuses on RQF_USE_SCHED blk-throttle: Fix io statistics for cgroup v1 bcache: Fix bcache device claiming bcache: Alloc holder object before async registration raid10: avoid spin_lock from fastpath from raid10_unplug() md: fix 'delete_mutex' deadlock ...
2023-07-03Merge tag 'io_uring-6.5-2023-07-03' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: "The fix for the msghdr->msg_inq assigned value being wrong, using -1 instead of -1U for the signed type. Also a fix for ensuring when we're trying to run task_work on an exiting task, that we wait for it. This is not really a correctness thing as the work is being canceled, but it does help with ensuring file descriptors are closed when the task has exited." * tag 'io_uring-6.5-2023-07-03' of git://git.kernel.dk/linux: io_uring: flush offloaded and delayed task_work on exit io_uring: remove io_fallback_tw() forward declaration io_uring/net: use proper value for msg_inq
2023-07-03Merge tag 'hsi-for-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: - fix build warning with W=1 - drop error handling for debugfs * tag 'hsi-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: omap_ssi_port: Drop error checking for debugfs_create_dir HSI: fix ssi_waketest() declaration
2023-07-03Merge tag 'for-v6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Add new Qualcomm PMI8998/PM660 SMB2 charger - bq256xx: support systems without thermistors - cros_pchg: fix peripheral device status after system resume - axp20x_usb_power: add support for AXP192 - qcom-pon: add support for pm8941 - at91-reset: prepare to expose reset reason to sysfs - switch all I2C drivers back to use .probe instead of .probe_new - convert some more DT bindings to YAML - misc cleanups * tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml power: reset: at91-reset: change the power on reason prototype power: reset: qcom-pon: add support for pm8941-pon dt-bindings: power: reset: qcom-pon: define pm8941-pon power: supply: add Qualcomm PMI8998 SMB2 Charger driver dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver power: supply: rt9467: Make charger-enable control as logic level power: supply: Switch i2c drivers back to use .probe() power: reset: add HAS_IOPORT dependencies dt-bindings: power: supply: axp20x: Add AXP192 compatible power: supply: axp20x_usb_power: Add support for AXP192 power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check power: supply: axp20x_usb_power: Use regmap field for VBUS disabling power: supply: axp20x_usb_power: Use regmap fields for USB BC feature power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature power: supply: axp20x_usb_power: Simplify USB current limit handling power: supply: hwmon: constify pointers to hwmon_channel_info power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed() ...
2023-07-03Merge tag 'rproc-v6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "The bulk of these patches relates to the moving to a void-returning remove callback. The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to resolve build warnings about 'defined but not used' variables in certain configurations. The ST STM32 remoteproc driver is extended to allow using a SCMI reset controller to hold boot, and has an error message corrected. The Qualcomm Q6V5 PAS driver gains a missing 'static' qualifier on adsp_segment_dump()" * tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits) remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump() remoteproc: stm32: Fix error code in stm32_rproc_parse_dt() remoteproc: stm32: Allow hold boot management by the SCMI reset controller dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations remoteproc: imx_dsp_rproc: use modern pm_ops remoteproc: wkup_m3: Convert to platform remove callback returning void remoteproc: stm32: Convert to platform remove callback returning void remoteproc: st: Convert to platform remove callback returning void remoteproc: virtio: Convert to platform remove callback returning void remoteproc: rcar: Convert to platform remove callback returning void remoteproc: qcom_wcnss: Convert to platform remove callback returning void remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void remoteproc: pru: Convert to platform remove callback returning void remoteproc: omap: Convert to platform remove callback returning void remoteproc: mtk_scp: Convert to platform remove callback returning void remoteproc: meson_mx_ao_arc: Convert to platform remove callback returning void remoteproc: keystone: Convert to platform remove callback returning void ...
2023-07-03Merge tag 'hwlock-v6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull hwspinlock update from Bjorn Andersson: "This drops the last of_match_ptr() from the hwspinlock drivers, solving the resulting 'defined but not used' warning/error" * tag 'hwlock-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: hwspinlock: omap: drop of_match_ptr for ID table
2023-07-03rdma: fix INFINIBAND_USER_ACCESS dependencyArnd Bergmann
After a change to the bnxt_re driver, it fails to link when CONFIG_INFINIBAND_USER_ACCESS is disabled: aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o: in function `bnxt_re_handler_BNXT_RE_METHOD_ALLOC_PAGE': ib_verbs.c:(.text+0xd64): undefined reference to `ib_uverbs_get_ucontext_file' aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x168): undefined reference to `uverbs_idr_class' aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x1a8): undefined reference to `uverbs_destroy_def_handler' The problem is that the 'bnxt_re_uapi_defs' structure is built unconditionally and references a couple of functions that are never really called in this configuration but instead require other functions that are left out. Adding an #ifdef around the new code, or a Kconfig dependency would address this problem, but adding the compile-time check inside of the UAPI_DEF_CHAIN_OBJ_TREE_NAMED() macro seems best because that also addresses the problem in other drivers that may run into the same dependency. Fixes: 360da60d6c6ed ("RDMA/bnxt_re: Enable low latency push") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-03Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - resume support in vdpa/solidrun - structure size optimizations in virtio_pci - new pds_vdpa driver - immediate initialization mechanism for vdpa/ifcvf - interrupt bypass for vdpa/mlx5 - multiple worker support for vhost - viirtio net in Intel F2000X-PL support for vdpa/ifcvf - fixes, cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits) vhost: Make parameter name match of vhost_get_vq_desc() vduse: fix NULL pointer dereference vhost: Allow worker switching while work is queueing vhost_scsi: add support for worker ioctls vhost: allow userspace to create workers vhost: replace single worker pointer with xarray vhost: add helper to parse userspace vring state/file vhost: remove vhost_work_queue vhost_scsi: flush IO vqs then send TMF rsp vhost_scsi: convert to vhost_vq_work_queue vhost_scsi: make SCSI cmd completion per vq vhost_sock: convert to vhost_vq_work_queue vhost: convert poll work to be vq based vhost: take worker or vq for flushing vhost: take worker or vq instead of dev for queueing vhost, vhost_net: add helper to check if vq has work vhost: add vhost_worker pointer to vhost_virtqueue vhost: dynamically allocate vhost_worker vhost: create worker at end of vhost_dev_set_owner virtio_bt: call scheduler when we free unused buffs ...
2023-07-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "ARM64: - Eager page splitting optimization for dirty logging, optionally allowing for a VM to avoid the cost of hugepage splitting in the stage-2 fault path. - Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with services that live in the Secure world. pKVM intervenes on FF-A calls to guarantee the host doesn't misuse memory donated to the hyp or a pKVM guest. - Support for running the split hypervisor with VHE enabled, known as 'hVHE' mode. This is extremely useful for testing the split hypervisor on VHE-only systems, and paves the way for new use cases that depend on having two TTBRs available at EL2. - Generalized framework for configurable ID registers from userspace. KVM/arm64 currently prevents arbitrary CPU feature set configuration from userspace, but the intent is to relax this limitation and allow userspace to select a feature set consistent with the CPU. - Enable the use of Branch Target Identification (FEAT_BTI) in the hypervisor. - Use a separate set of pointer authentication keys for the hypervisor when running in protected mode, as the host is untrusted at runtime. - Ensure timer IRQs are consistently released in the init failure paths. - Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps (FEAT_EVT), as it is a register commonly read from userspace. - Erratum workaround for the upcoming AmpereOne part, which has broken hardware A/D state management. RISC-V: - Redirect AMO load/store misaligned traps to KVM guest - Trap-n-emulate AIA in-kernel irqchip for KVM guest - Svnapot support for KVM Guest s390: - New uvdevice secret API - CMM selftest and fixes - fix racy access to target CPU for diag 9c x86: - Fix missing/incorrect #GP checks on ENCLS - Use standard mmu_notifier hooks for handling APIC access page - Drop now unnecessary TR/TSS load after VM-Exit on AMD - Print more descriptive information about the status of SEV and SEV-ES during module load - Add a test for splitting and reconstituting hugepages during and after dirty logging - Add support for CPU pinning in demand paging test - Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes included along the way - Add a "nx_huge_pages=never" option to effectively avoid creating NX hugepage recovery threads (because nx_huge_pages=off can be toggled at runtime) - Move handling of PAT out of MTRR code and dedup SVM+VMX code - Fix output of PIC poll command emulation when there's an interrupt - Add a maintainer's handbook to document KVM x86 processes, preferred coding style, testing expectations, etc. - Misc cleanups, fixes and comments Generic: - Miscellaneous bugfixes and cleanups Selftests: - Generate dependency files so that partial rebuilds work as expected" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits) Documentation/process: Add a maintainer handbook for KVM x86 Documentation/process: Add a label for the tip tree handbook's coding style KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index RISC-V: KVM: Remove unneeded semicolon RISC-V: KVM: Allow Svnapot extension for Guest/VM riscv: kvm: define vcpu_sbi_ext_pmu in header RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip RISC-V: KVM: Add in-kernel emulation of AIA APLIC RISC-V: KVM: Implement device interface for AIA irqchip RISC-V: KVM: Skeletal in-kernel AIA irqchip support RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero RISC-V: KVM: Add APLIC related defines RISC-V: KVM: Add IMSIC related defines RISC-V: KVM: Implement guest external interrupt line management KVM: x86: Remove PRIx* definitions as they are solely for user space s390/uv: Update query for secret-UVCs s390/uv: replace scnprintf with sysfs_emit s390/uvdevice: Add 'Lock Secret Store' UVC ...
2023-07-03Merge tag 'kgdb-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "Fairly small changes this cycle: - An additional static inline function when kgdb is not enabled to reduce boilerplate in arch files - kdb will now handle input with linefeeds more like carriage return. This will make little difference for interactive use but can make it script to use expect-like interaction with kdb - A couple of warning fixes" * tag 'kgdb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: move kdb_send_sig() declaration to a better header file kdb: Handle LF in the command parser kdb: include kdb_private.h for function prototypes kgdb: Provide a stub kgdb_nmicallback() if !CONFIG_KGDB
2023-07-03gfs2: Add quota_change typeBob Peterson
Function do_qc has two main uses: (1) to re-sync the local quota changes (qd) to the master quotas, and (2) normal quota changes. In the case of normal quota changes, the change can be positive or negative, as the quota usage goes up and down. Before this patch function do_qc was distinguishing one from another by whether the resulting value is or isn't zero: In the case of a re-sync (called do_sync) the quota value is moved from the temporary value to a master value, so the amount is added to one and subtracted from the other. The problem is that since the values can be positive or negative we can occasionally run into situations where we are not doing a re-sync but the quota change just happens to cancel out the previous value. In the case of a re-sync extra references and locks are taken, and so do_qc needs to release them. In the case of a normal quota change, no extra references and locks are taken, so it must not try to release them. The problem is: if the quota change is not a re-sync but the value just happens to cancel out the original quota change, the resulting zero value fools do_qc into thinking this is a re-sync and therefore it must release the extra references. This results in problems, mainly having to do with slot reference numbers going smaller than zero. This patch introduces new constants, QC_SYNC and QC_CHANGE so do_qc can really tell the difference. For QC_SYNC calls it must release the extra references acquired by gfs2_quota_unlock's call to qd_check_sync. For QC_CHANGE calls it does not have extra references to put. Note that this allows quota changes back to a value of zero, and so I removed an assert warning related to that. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 01:39:40 +0000