summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-22media: dt-bindings: media: rcar_vin: Use status "okay"Geert Uytterhoeven
According to the Devicetree Specification, "ok" is not a valid status. Fixes: 47c71bd61b772cd7 ("[media] rcar_vin: add devicetree support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: v4l2-common: fix a compilation breakageMauro Carvalho Chehab
Clearly, changeset 95ce9c28601a ("media: v4l: common: Add a function to obtain best size from a list") was never tested, as it broke compilation with: drivers/media/platform/vivid/vivid-vid-cap.c: In function ‘vivid_try_fmt_vid_cap’: drivers/media/platform/vivid/vivid-vid-cap.c:565:34: error: macro "v4l2_find_nearest_size" requer 6 argumentos, mas apenas 5 foram fornecidos mp->width, mp->height); ^ drivers/media/platform/vivid/vivid-vid-cap.c:564:4: error: ‘v4l2_find_nearest_size’ undeclared (first use in this function); did you mean ‘__v4l2_find_nearest_size’? v4l2_find_nearest_size(webcam_sizes, width, height, ^~~~~~~~~~~~~~~~~~~~~~ __v4l2_find_nearest_size drivers/media/platform/vivid/vivid-vid-cap.c:564:4: note: each undeclared identifier is reported only once for each function it appears in drivers/media/i2c/ov5670.c: In function ‘ov5670_set_pad_format’: drivers/media/i2c/ov5670.c:2233:48: error: macro "v4l2_find_nearest_size" requer 6 argumentos, mas apenas 5 foram fornecidos fmt->format.width, fmt->format.height); ^ drivers/media/i2c/ov5670.c:2232:9: error: ‘v4l2_find_nearest_size’ undeclared (first use in this function); did you mean ‘__v4l2_find_nearest_size’? mode = v4l2_find_nearest_size(supported_modes, width, height, ^~~~~~~~~~~~~~~~~~~~~~ __v4l2_find_nearest_size drivers/media/i2c/ov13858.c: In function ‘ov13858_set_pad_format’: drivers/media/i2c/ov13858.c:1379:48: error: macro "v4l2_find_nearest_size" requer 6 argumentos, mas apenas 5 foram fornecidos fmt->format.width, fmt->format.height); ^ drivers/media/i2c/ov13858.c:1378:9: error: ‘v4l2_find_nearest_size’ undeclared (first use in this function); did you mean ‘__v4l2_find_nearest_size’? mode = v4l2_find_nearest_size(supported_modes, width, height, ^~~~~~~~~~~~~~~~~~~~~~ __v4l2_find_nearest_size drivers/media/i2c/ov13858.c:1378:9: note: each undeclared identifier is reported only once for each function it appears in Basically, v4l2_find_nearest_size() callers pass 5 arguments, while its definition require 6 args. Unfortunately, my build process was also broken, as it was reporting me that the compilation went fine: $ make ARCH=i386 CF=-D__CHECK_ENDIAN__ CONFIG_DEBUG_SECTION_MISMATCH=y C=1 W=1 CHECK='compile_checks' M=drivers/staging/media $ make ARCH=i386 CF=-D__CHECK_ENDIAN__ CONFIG_DEBUG_SECTION_MISMATCH=y C=1 W=1 CHECK='compile_checks' M=drivers/media *** ERRORS *** *** WARNINGS *** compilation succeeded That was due to a change here to use of linux-log-diff script that provides a diffstat between the errors output. Somehow, the logic was missing some fatal errors. Fixes: 95ce9c28601a ("media: v4l: common: Add a function to obtain best size from a list") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: staging: media: Replace "cant" with "can't"Arushi Singhal
Replace "cant" with "can't". "cant" is not same as "Can not" or "Can't". Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: atomisp_fops.c: disable atomisp_compat_ioctl32Hans Verkuil
The atomisp_compat_ioctl32() code has problems. This patch disables the compat_ioctl32 support until those issues have been fixed. Contact Sakari or me for more details. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: staging: media: atomisp: Remove inclusion of non-existing directoriesCorentin Labbe
This patch fix the following build warnings: CC [M] drivers/staging/media/atomisp/pci/atomisp2/atomisp_drvfs.o cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/bayer_ls/bayer_ls_1.0/: No such file or directory [-Wmissing-include-dirs] cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/io_ls/plane_io_ls/: No such file or directory [-Wmissing-include-dirs] cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/io_ls/yuv420_io_ls/: No such file or directory [-Wmissing-include-dirs] cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/ipu2_io_ls/plane_io_ls/: No such file or directory [-Wmissing-include-dirs] cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/ipu2_io_ls/yuv420_io_ls/: No such file or directory [-Wmissing-include-dirs] cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/s3a_stat_ls/: No such file or directory [-Wmissing-include-dirs] cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/scale/: No such file or directory [-Wmissing-include-dirs] cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/scale/scale_1.0/: No such file or directory [-Wmissing-include-dirs] cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/yuv_ls: No such file or directory [-Wmissing-include-dirs] cc1: warning: drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/yuv_ls/yuv_ls_1.0/: No such file or directory [-Wmissing-include-dirs] by removing the inclusion of such directories Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: atomisp: convert default struct values to use compound-literals with ↵Jeremy Sowden
designated initializers The CSS API uses a lot of nested anonymous structs defined in object macros to assign default values to its data-structures. These have been changed to use compound-literals and designated initializers to make them more comprehensible and less fragile. The compound-literals can also be used in assignment, which means we can get rid of some temporary variables whose only purpose is to be initialized by one of these anonymous structs and then serve as the rvalue in an assignment expression. A lot of the members of the default struct values used by the CSS API were explicitly initialized to zero values. Designated initializers have allowed these members, and in some case whole default struct values, to be removed. Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: staging: media: atomisp2: remove unused headersCorentin Labbe
All thoses headers are not used by any source files. Lets just remove them. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: staging: media: remove remains of VIDEO_ATOMISP_OV8858Corentin Labbe
OV8858 files are left unusable since commit 3a81c7660f80 ("media: staging: atomisp: Remove IMX sensor support") They are uncompilable since they depends on dw9718.c and vcm.c which was removed. Remove the OV8858 kconfig and files. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: staging: atomisp: remove redundant assignments to various variablesColin Ian King
There are various assignments that are being made to variables that are not read and the variables are being updated later on, hence the redundant assignments can be removed. Cleans up clang warnings: drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c:1950:8: warning: Value stored to 'pdata' during its initialization is never read drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:1853:29: warning: Value stored to 'asd' during its initialization is never read drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_css20.c:4505:29: warning: Value stored to 'asd' during its initialization is never read drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:1139:30: warning: Value stored to 'asd' during its initialization is never read drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:6961:27: warning: Value stored to 'tmp_in_info' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: staging: media: atomisp: remove pointless string copyArnd Bergmann
gcc-8 points out that a string is copied to itself here: In file included from drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_include/platform_support.h:25, from drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_include/memory_access/memory_access.h:48, from drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/debug/src/ia_css_debug.c:16: In function 'strncpy', inlined from 'ia_css_debug_pipe_graph_dump_stage' at drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_include/string_support.h:158:2: include/linux/string.h:253:9: error: '__builtin_strncpy' source argument is the same as destination [-Werror=restrict] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This removes the bogus code, leaving the behavior otherwise unchanged. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: drivers: staging: media: atomisp: pci: atomisp2: css2400: fix ↵Alona Solntseva
misspellings Misspelled words are fixed in several places. Signed-off-by: Alona Solntseva <al.solnts@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: MAINTAINERS: Add entry for Aptina MT9T112Jacopo Mondi
Add entry for Aptina/Micron MT9T112 camera sensor. The driver is maintained by me for "Odd Fixes" only due to lack of suitable hardware for testing. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: arch: sh: ecovec: Use new renesas-ceu camera driverJacopo Mondi
SH4 7724 Ecovec platform uses sh_mobile_ceu camera driver, which is now being replaced by a proper V4L2 camera driver named 'renesas-ceu'. Get rid of soc_camera defined components used to register sensor drivers and of platform specific enable/disable routines. Register GPIOs for sensor drivers and declare memory reserved with memblock APIs as dma capable to be used for CEU buffers. While at there re-order include directives to respect alphabetical ordering. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: mt9t112: Remove soc_camera dependenciesJacopo Mondi
Remove soc_camera framework dependencies from mt9t112 sensor driver. - Handle clk, gpios and power routines - Register async subdev - Remove deprecated g/s_mbus_config operations - Remove driver flags - Change driver interface and add kernel doc - Adjust build system - Fix code style issues reported by checkpatch in strict mode This commit does not remove the original soc_camera based driver as long as other platforms depends on soc_camera framework. As I don't have access to a working camera module, this change has only been compile tested. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: Copy mt9t112 soc_camera sensor driverJacopo Mondi
Copy the soc_camera based driver in v4l2 sensor driver directory. This commit just copies the original file without modifying it. No modification to KConfig and Makefile as soc_camera framework dependencies need to be removed first in next commit. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: correct some coding style issuesAntti Palosaari
Correct coding style issues reported mostly by checkpatch.pl. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: convert to regmap apiAntti Palosaari
Use regmap for chip register access. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: dvb-usb-v2: add probe/disconnect callbacksAntti Palosaari
Add probe and disconnect callbacks that behaves similarly than ones used commonly on Linux driver model. We need those to get early / late access to driver in order to use normal probe time stuff, like regmap, extra bus adapters and so. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: enhance streaming configAntti Palosaari
Replace static stream settings by one which enables and disables stream interface when needed (TS streaming control). 1) Configure both TS IF and USB endpoints according to current use case 2) Disable streaming USB endpoints when streaming is stopped and enable when streaming is started. Reduces sleep power consumption slightly. 3) Reduce USB buffersize slightly, from 130848 to 98136 bytes Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: refactor copy firmware to slave demodAntti Palosaari
Small improvements. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: refactor firmware downloadAntti Palosaari
Small revise, no functional changes. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: use af9013 demod pid filtersAntti Palosaari
PID filters are moved to af9013 demod driver as those are property of demod. As pid filters are now implemented correctly by demod driver, we could enable pid filter support for possible slave demod too on dual tuner configuration. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: add pid filter supportAntti Palosaari
af9013 demod has pid filter. Add support for it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: remove all legacy media attach releated stuffAntti Palosaari
No one is binding that driver through media attach so remove it and all related dead code. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: attach demod using i2c bindingAntti Palosaari
af9013 demod driver has i2c binding. Use it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: add i2c mux adapter for tuner busAntti Palosaari
Add muxed i2c adapter for demod tuner i2c bus gate control. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: convert inittabs suitable for regmap_update_bitsAntti Palosaari
Convert inttabs to format (reg, mask, val) which are suitable parameters to pass directly for regmap_update_bits. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9015: fix loggingAntti Palosaari
Pass correct device to dev_* logging functions, which allows us to remove redundant KBUILD_MODNAME and __func__ parameters from log format. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: wrap dvbv3 statistics via dvbv5Antti Palosaari
Driver has calculated dvbv5 statistics, so use those as a base for legacy dvbv3 statistics. Wrap and convert needed values to dvbv3, remove old dvbv3 statistic implementations. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: dvbv5 ber and perAntti Palosaari
Implement dvbv5 ber and per. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: dvbv5 cnrAntti Palosaari
Implement dvbv5 cnr. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: dvbv5 signal strengthAntti Palosaari
Implement dvbv5 signal strength estimate. We know tuner dependent -80dBm and -50dBm agc values, construct line equation and use it to map agc value to signal strength estimate. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: af9013: change lock detection slightlyAntti Palosaari
Whilst rewritten largely, the basic logic remains same with one exception: do not return immediately on success case. We are going to add statistics that function and cannot return too early. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: mceusb: pid 0x0609 vid 0x031d does not under report carrier cyclesSean Young
This mceusb does not need the carrier count quirk, with it set it reports the carrier higher than it is. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: mceusb: add IR learning support features (IR carrier frequency ↵A Sun
measurement and wide-band/short-range receiver) Windows Media Center IR transceivers include two IR receivers; wide-band/short-range and narrow-band/long-range. The short-range (5cm distance) receiver is for IR learning and has IR carrier frequency measuring ability. Add mceusb driver support to select the short range IR receiver and enable pass through of its IR carrier frequency measurements. RC and LIRC already support these mceusb driver additions. Test platform: Linux raspberrypi 4.9.59-v7+ #1047 SMP Sun Oct 29 12:19:23 GMT 2017 armv7l GNU/Linux mceusb 1-1.2:1.0: Registered Pinnacle Systems PCTV Remote USB with mce emulator interface version 1 mceusb 1-1.2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active) Sony TV remote control ir-ctl from v4l-utils pi@raspberrypi:~ $ ir-ctl -V IR raw version 1.12.3 pi@raspberrypi:~ $ ir-ctl -m -r ... pulse 650 space 550 pulse 650 space 600 pulse 600 space 600 pulse 1200 space 600 pulse 650 space 550 pulse 650 space 600 pulse 600 space 600 pulse 550 carrier 40004 space 16777215 ^C pi@raspberrypi:~ $ exit Signed-off-by: A Sun <as1033x@comcast.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: meson-ir: lower timeout and make configurableSean Young
A timeout of 200ms is much longer than necessary, and delays the decoding decoding of a single scancode and the last scancode when a button is being held. This makes the remote seem sluggish. If the min_timeout and max_timeout values are set, the timeout is configurable via the LIRC_SET_REC_TIMEOUT ioctl. Tested-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: rc: meson-ir: add timeout on idleSean Young
Meson doesn't seem to be able to generate timeout events in hardware. So install a software timer to generate the timeout events required by the decoders to prevent "ghost keypresses". Reported-by: Matthias Reichl <hias@horus.com> Tested-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: cpia2_usb: drop bogus interface-release callJohan Hovold
Drop bogus call to usb_driver_release_interface() from the disconnect() callback. As the interface is already being unbound at this point, usb_driver_release_interface() simply returns early. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: imx: add 8-bit grayscale supportPhilipp Zabel
The IPUv3 code has 8-bit grayscale capture support. Enable imx-media to use it. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: adv7604: Add support for i2c_new_secondary_deviceJean-Michel Hautbois
The ADV7604 has thirteen 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Allow a device tree node to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. [Kieran: Re-adapted for mainline] Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: dt-bindings: media: adv7604: Extend bindings to allow specifying ↵Jean-Michel Hautbois
slave map addresses The ADV7604 has thirteen 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Extend the device tree node bindings to be able to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. [Kieran: Re-adapted for mainline] Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: adv748x: Add support for i2c_new_secondary_deviceKieran Bingham
The ADV748x has twelve 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Allow a device tree node to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: adv748x: Add missing CBUS pageKieran Bingham
The ADV748x has 12 pages mapped onto I2C addresses. In the existing implementation only 11 are mapped correctly in the page enumerations, which causes an off-by-one fault on pages above the infoframe definition due to a missing 'CBUS' page. This causes the address for the CEC, SDP, TXA, and TXB to be incorrectly programmed during the iterations in adv748x_initialise_clients(). Until now this has gone un-noticed due to the fact that following the creation of the clients - the device is reset and the addresses are reprogrammed in manually by the call to "adv748x_write_regs(state, adv748x_set_slave_address);" As part of moving to dynamic i2c address allocations repair this by providing the missing CBUS page definition. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: i2c: adv748x: Simplify regmap configurationKieran Bingham
The ADV748x has identical map configurations for each register map. The duplication of each map can be simplified using a helper macro such that each map is represented on a single line. Define ADV748X_REGMAP_CONF for this purpose use it to create the tables. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: add tuner standby op, use where neededHans Verkuil
The v4l2_subdev core s_power op was used for two different things: power on/off sensors or video decoders/encoders and to put a tuner in standby (and only the tuner!). There is no 'tuner wakeup' op, that's done automatically when the tuner is accessed. The danger with calling (s_power, 0) to put a tuner into standby is that it is usually broadcast for all subdevs. So a video receiver subdev that supports s_power will also be powered off, and since there is no corresponding (s_power, 1) they will never be powered on again. In addition, this is specifically meant for tuners only since they draw the most current. This patch adds a new tuner op called 'standby' and replaces all calls to (core, s_power, 0) by (tuner, standby). This prevents confusion between the two uses of s_power. Note that there is no overlap: bridge drivers either just want to put the tuner into standby, or they deal with powering on/off sensors. Never both. This also makes it easier to replace s_power for the remaining bridge drivers with some PM code later. Whether we want something cleaner for tuners in the future is a separate topic. There is a lot of legacy code surrounding tuners, and I am very hesitant about making changes there. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: vb2-core: vb2_ops: document non-interrupt-context callingLuca Ceresoli
Driver writers can benefit in knowing if/when callbacks are called in interrupt context. But it is not completely obvious here, so document it. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: vb2-core: document the REQUEUEING stateLuca Ceresoli
VB2_BUF_STATE_REQUEUEING is accepted by vb2_buffer_done() but not documented, so add it along with notes about calls in interrupt context. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: vb2-core: vb2_buffer_done: consolidate docsLuca Ceresoli
Documentation about what start_streaming() should do on failure are scattered in two places and mostly duplicated, so consolidate them in one of the two places. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: radio: Critical interrupt bugfix for si470x over i2cDouglas Fischer
Fixed si470x_start() disabling the interrupt signal, causing tune operations to never complete. This does not affect USB radios because they poll the registers instead of using the IRQ line. Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com> [hans.verkuil@cisco.com: fixed 80 column checkpatch warning] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21media: radio: Critical v4l2 registration bugfix for si470x over i2cDouglas Fischer
Added the call to v4l2_device_register() required to add a new radio device. Without this patch, it is impossible for the driver to load. This does not affect USB devices. Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 06:34:07 +0000