| Age | Commit message (Collapse) | Author |
|---|
|
Refactor the ynl code to encapsulate protocol specifics into
NetlinkProtocol and GenlProtocol.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230825122756.7603-8-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move decode_fixed_header into YnlFamily and add a _fixed_header_size
method to allow extack decoding to skip the fixed header.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a SpecMcastGroup class to the nlspec lib.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a doc page for netlink-raw that describes the schema attributes
needed for netlink-raw.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add documentation for recently added genetlink-legacy schema attributes.
Remove statements about 'work in progress' and 'todo'.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This schema is largely a copy of the genetlink-legacy schema with the
following modifications:
- change the schema id to netlink-raw
- add a top-level protonum property, e.g. 0 (for NETLINK_ROUTE)
- change the protocol enumeration to netlink-raw, removing the
genetlink options.
- replace doc references to generic netlink with raw netlink
- add a value property to mcast-group definitions
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typo verion -> version in genetlink-c and genetlink-legacy.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Saeed Mahameed says:
====================
{devlink,mlx5}: Add port function attributes for ipsec
From Dima:
Introduce hypervisor-level control knobs to set the functionality of PCI
VF devices passed through to guests. The administrator of a hypervisor
host may choose to change the settings of a port function from the
defaults configured by the device firmware.
The software stack has two types of IPsec offload - crypto and packet.
Specifically, the ip xfrm command has sub-commands for "state" and
"policy" that have an "offload" parameter. With ip xfrm state, both
crypto and packet offload types are supported, while ip xfrm policy can
only be offloaded in packet mode.
The series introduces two new boolean attributes of a port function:
ipsec_crypto and ipsec_packet. The goal is to provide a similar level of
granularity for controlling VF IPsec offload capabilities, which would
be aligned with the software model. This will allow users to decide if
they want both types of offload enabled for a VF, just one of them, or
none at all (which is the default).
At a high level, the difference between the two knobs is that with
ipsec_crypto, only XFRM state can be offloaded. Specifically, only the
crypto operation (Encrypt/Decrypt) is offloaded. With ipsec_packet, both
XFRM state and policy can be offloaded. Furthermore, in addition to
crypto operation offload, IPsec encapsulation is also offloaded. For
XFRM state, choosing between crypto and packet offload types is
possible. From the HW perspective, different resources may be required
for each offload type.
Examples of when a user prefers to enable IPsec packet offload for a VF
when using switchdev mode:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable migratable disable ipsec_crypto disable ipsec_packet disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable migratable disable ipsec_crypto disable ipsec_packet enable
This enables the corresponding IPsec capability of the function before
it's enumerated, so when the driver reads the capability from the device
firmware, it is enabled. The driver is then able to configure
corresponding features and ops of the VF net device to support IPsec
state and policy offloading.
v2: https://lore.kernel.org/netdev/20230421104901.897946-1-dchumak@nvidia.com/
====================
Link: https://lore.kernel.org/r/20230825062836.103744-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement devlink port function commands to enable / disable IPsec
packet offloads. This is used to control the IPsec capability of the
device.
When ipsec_offload is enabled for a VF, it prevents adding IPsec packet
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec packet
offloads on the PF, it's not allowed to enable ipsec_packet on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement devlink port function commands to enable / disable IPsec
crypto offloads. This is used to control the IPsec capability of the
device.
When ipsec_crypto is enabled for a VF, it prevents adding IPsec crypto
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec crypto
offloads on the PF, it's not allowed to enable ipsec_crypto on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5 HW can't perform IPsec offload operation simultaneously both on PF
and VFs at the same time. While the previous patches added devlink knobs
to change IPsec capabilities dynamically, there is a need to add a logic
to block such IPsec capabilities for the cases when IPsec is already
configured.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add hardware definitions to allow to control IPSec capabilities.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-6-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the commit 366e46242b8e ("net/mlx5e: Make IPsec offload work together
with eswitch and TC"), new API to block IPsec vs. TC creation was introduced.
Internally, that API used devlink lock to avoid races with userspace, but it is
not really needed as dev->priv.eswitch is stable and can't be changed. So remove
dependency on devlink lock and move block encap code back to its original place.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no need in holding devlink lock as it gives nothing
compared to already used write mode_lock.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose port function commands to enable / disable IPsec packet offloads,
this is used to control the port IPsec capabilities.
When IPsec packet is disabled for a function of the port (default),
function cannot offload IPsec packet operations (encapsulation and XFRM
policy offload). When enabled, IPsec packet operations can be offloaded
by the function of the port, which includes crypto operation
(Encrypt/Decrypt), IPsec encapsulation and XFRM state and policy
offload.
Example of a PCI VF port which supports IPsec packet offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose port function commands to enable / disable IPsec crypto offloads,
this is used to control the port IPsec capabilities.
When IPsec crypto is disabled for a function of the port (default),
function cannot offload any IPsec crypto operations (Encrypt/Decrypt and
XFRM state offloading). When enabled, IPsec crypto operations can be
offloaded by the function of the port.
Example of a PCI VF port which supports IPsec crypto offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small driver fixes and one larger unused function set removal in
the raid class (so no external impact)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: snic: Fix double free in snic_tgt_create()
scsi: core: raid_class: Remove raid_component_add()
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5
scsi: ufs: mcq: Fix the search/wrap around logic
|
|
Fix the LAN receive and LAN transmit LEDs, which where swapped
up to now.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
|
|
Move initialization code for LASI out of the GSC driver.
Since ASP and WAX have been moved in previous commits,
the GSC driver is now just a driver which provides library
functions for LASI, ASP and WAX and as such doesn't need
an own initialization function any longer.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This conversion includes LASI, ASP and WAX drivers for now.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This is the order in which the drivers are initialized in setup.c.
The order is important when the drivers are convertet to use the
initcall_*() startup framework.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
MD Danish Anwar says:
====================
Introduce IEP driver and packet timestamping support
This series introduces Industrial Ethernet Peripheral (IEP) driver to
support timestamping of ethernet packets and thus support PTP and PPS
for PRU ICSSG ethernet ports.
This series also adds 10M full duplex support for ICSSG ethernet driver.
There are two IEP instances. IEP0 is used for packet timestamping while IEP1
is used for 10M full duplex support.
This is v7 of the series [v1]. It addresses comments made on [v6].
This series is based on linux-next(#next-20230823).
Changes from v6 to v7:
*) Dropped blank line in example section of patch 1.
*) Patch 1 previously had three examples, removed two examples and kept only
one example as asked by Krzysztof.
*) Added Jacob Keller's RB tag in patch 5.
*) Dropped Roger's RB tags from the patches that he has authored (Patch 3 and 4)
Changes from v5 to v6:
*) Added description of IEP in commit messages of patch 2 as asked by Rob.
*) Described the items constraints properly for iep property in patch 2 as
asked by Rob.
*) Added Roger and Simon's RB tags.
Changes from v4 to v5:
*) Added comments on why we are using readl / writel instead of regmap_read()
/ write() in icss_iep_gettime() / settime() APIs as asked by Roger.
*) Added Conor's RB tag in patch 1 and 2.
Change from v3 to v4:
*) Changed compatible in iep dt bindings. Now each SoC has their own compatible
in the binding with "ti,am654-icss-iep" as a fallback as asked by Conor.
*) Addressed Andew's comments and removed helper APIs icss_iep_readl() /
writel(). Now the settime/gettime APIs directly use readl() / writel().
*) Moved selecting TI_ICSS_IEP in Kconfig from patch 3 to patch 4.
*) Removed forward declaration of icss_iep_of_match in patch 3.
*) Replaced use of of_device_get_match_data() to device_get_match_data() in
patch 3.
*) Removed of_match_ptr() from patch 3 as it is not needed.
Changes from v2 to v3:
*) Addressed Roger's comment and moved IEP1 related changes in patch 5.
*) Addressed Roger's comment and moved icss_iep.c / .h changes from patch 4
to patch 3.
*) Added support for multiple timestamping in patch 4 as asked by Roger.
*) Addressed Andrew's comment and added comment in case SPEED_10 in
icssg_config_ipg() API.
*) Kept compatible as "ti,am654-icss-iep" for all TI K3 SoCs
Changes from v1 to v2:
*) Addressed Simon's comment to fix reverse xmas tree declaration. Some APIs
in patch 3 and 4 were not following reverse xmas tree variable declaration.
Fixed it in this version.
*) Addressed Conor's comments and removed unsupported SoCs from compatible
comment in patch 1.
*) Addded patch 2 which was not part of v1. Patch 2, adds IEP node to dt
bindings for ICSSG.
[v1] https://lore.kernel.org/all/20230803110153.3309577-1-danishanwar@ti.com/
[v2] https://lore.kernel.org/all/20230807110048.2611456-1-danishanwar@ti.com/
[v3] https://lore.kernel.org/all/20230809114906.21866-1-danishanwar@ti.com/
[v4] https://lore.kernel.org/all/20230814100847.3531480-1-danishanwar@ti.com/
[v5] https://lore.kernel.org/all/20230817114527.1585631-1-danishanwar@ti.com/
[v6] https://lore.kernel.org/all/20230823113254.292603-1-danishanwar@ti.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For AM65x SR2.0 it's required to enable IEP1 in raw 64bit mode which is
used by PRU FW to monitor the link and apply w/a for 10M link issue.
Note. No public errata available yet.
Without this w/a the PRU FW will stuck if link state changes under TX
traffic pressure.
Hence, add support for 10M full duplex for AM65x SR2.0:
- add new IEP API to enable IEP, but without PTP support
- add pdata quirk_10m_link_issue to enable 10M link issue w/a.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add packet timestamping TS and PTP PHC clock support.
For AM65x and AM64x:
- IEP1 is not used
- IEP0 is configured in shadow mode with 1ms cycle and shared between
Linux and FW. It provides time and TS in number cycles, so special
conversation in ns is required.
- IEP0 shared between PRUeth ports.
- IEP0 supports PPS, periodic output.
- IEP0 settime() and enabling PPS required FW interraction.
- RX TS provided with each packet in CPPI5 descriptor.
- TX TS returned through separate ICSSG hw queues for each port. TX TS
readiness is signaled by INTC IRQ. Only one packet at time can be requested
for TX TS.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Co-developed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to
support timestamping of ethernet packets and thus support PTP and PPS
for PRU ethernet ports.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IEP property in ICSSG hardware DT binding document.
ICSSG uses IEP (Industrial Ethernet Peripheral) to support timestamping
of ethernet packets, PTP and PPS.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a DT binding document for the ICSS Industrial Ethernet Peripheral(IEP)
hardware. IEP supports packet timestamping, PTP and PPS.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pieter Jansen van Vuuren says:
====================
sfc: introduce eth, ipv4 and ipv6 pedit offloads
This set introduces mac source and destination pedit set action offloads.
It also adds offload for ipv4 ttl and ipv6 hop limit pedit set action as
well pedit add actions that would result in the same semantics as
decrementing the ttl and hop limit.
v2:
- fix 'efx_tc_mangle' kdoc which was orphaned when adding 'efx_tc_pedit_add'.
- add description of 'match' in 'efx_tc_mangle' kdoc.
- correct some inconsistent kdoc indentation.
v1: https://lore.kernel.org/netdev/20230823111725.28090-1-pieter.jansen-van-vuuren@amd.com/
====================
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the pedit add actions to handle this case for ipv6. Similar to ipv4
dec ttl, decrementing ipv6 hop limit can be achieved by adding 0xff to the
hop limit field.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce pedit add actions and use it to achieve decrement ttl offload.
Decrement ttl can be achieved by adding 0xff to the ttl field.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Offload pedit set ipv6 hop limit, where the hop limit has already been
matched and the new value is one less, by translating it to a decrement.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Offload pedit set ipv4 ttl field, where the ttl field has already been
matched and the new value is one less, by translating it to a decrement.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the first pedit set offload functionality for the sfc driver.
In addition to this, add offload functionality for both mac source and
destination pedit set actions.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the initial ethernet pedit set action infrastructure in
preparation for adding mac src and dst pedit action offloads.
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix an FPU invalidation bug on exec(), and fix a performance
regression due to a missing setting of X86_FEATURE_OSXSAVE"
* tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4
x86/fpu: Invalidate FPU state correctly on exec()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A last minute fix for a regression introduced in the v6.5 merge
window.
The conversion of the software based interrupt resend mechanism to
hlist missed to add a check whether the descriptor is already enqueued
and dropped the interrupt descriptor lookup for nested interrupts.
The missing check whether the descriptor is already queued causes
hlist corruption and can be observed in the wild. The dropped parent
descriptor lookup has not yet caused problems, but it would result in
stale interrupt line in the worst case.
Add the missing enqueued check and bring the descriptor lookup back to
cure this"
* tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Fix software resend lockup and nested resend
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix a ptrace bug, a hw_breakpoint bug, some build errors/warnings and
some trivial cleanups"
* tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix hw_breakpoint_control() for watchpoints
LoongArch: Ensure FP/SIMD registers in the core dump file is up to date
LoongArch: Put the body of play_dead() into arch_cpu_idle_dead()
LoongArch: Add identifier names to arguments of die() declaration
LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP
LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP
LoongArch: Remove <asm/export.h>
LoongArch: Replace #include <asm/export.h> with #include <linux/export.h>
LoongArch: Remove unneeded #include <asm/export.h>
LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's
LoongArch: Remove redundant "source drivers/firmware/Kconfig"
|
|
The switch to using hlist for managing software resend of interrupts
broke resend in at least two ways:
First, unconditionally adding interrupt descriptors to the resend list can
corrupt the list when the descriptor in question has already been
added. This causes the resend tasklet to loop indefinitely with interrupts
disabled as was recently reported with the Lenovo ThinkPad X13s after
threaded NAPI was disabled in the ath11k WiFi driver.
This bug is easily fixed by restoring the old semantics of irq_sw_resend()
so that it can be called also for descriptors that have already been marked
for resend.
Second, the offending commit also broke software resend of nested
interrupts by simply discarding the code that made sure that such
interrupts are retriggered using the parent interrupt.
Add back the corresponding code that adds the parent descriptor to the
resend list.
Fixes: bc06a9e08742 ("genirq: Use hlist for managing resend handlers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/lkml/20230809073432.4193-1-johan+linaro@kernel.org/
Link: https://lore.kernel.org/r/20230826154004.1417-1-johan+linaro@kernel.org
|
|
In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the
MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to
add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally.
Otherwise we can't set read watchpoint and write watchpoint separately.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
