summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-02drm/sun4i: Add support for H3 HDMI PHY variantJernej Skrabec
While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3 HDMI PHY is completely custom PHY. However, they still have many things in common like clock and reset setup, setting sync polarity and more. Add support for H3 HDMI PHY variant. While documentation exists for this PHY variant, it doesn't go in great details. Because of that, almost all settings are copied from BSP linux 4.4. Interestingly, those settings are slightly different to those found in a older BSP with Linux 3.4. For now, no user visible difference was found between them. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-13-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Move and expand DW HDMI PHY register macrosJernej Skrabec
DW HDMI PHY macros are moved to header file and expanded with the registers present on newer SoCs like H3 and H5. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-12-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Add support for variants to DW HDMI PHYJernej Skrabec
There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While some things like clock and reset setup are the same, PHY configuration differs a lot. Split out code which is PHY specific to separate functions and create a structure which holds pointers to those functions. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-11-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Fix polarity configuration for DW HDMI PHYJernej Skrabec
Current polarity configuration code is cleary wrong since it compares same flag two times. However, even if flag name is fixed, it won't work well for resolutions which have one polarity positive and another negative. Fix that by properly set each bit according to each polarity. Since those two bits are not described in any documentation, relationships were obtained by experimentation. Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-10-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Add support for H3 mixer 0Jernej Skrabec
This mixer supports 1 VI plane, 3 UI plane and HW scaling on all planes. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-9-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Add support for H3 display engineJernej Skrabec
H3 display engine has two mixers which are connected to HDMI and TV output. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-8-jernej.skrabec@siol.net
2018-03-02dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipelineJernej Skrabec
Add missing compatibles for H3 HDMI pipeline. These compatibles can also be used with H5 SoC. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-6-jernej.skrabec@siol.net
2018-03-01drm/rockchip: analogix_dp: reorder psr_unregister call in unbindJeffy Chen
In bind the psr handler gets registered first before the core analogix_dp_bind() gets called. So it should be the other way around in unbind, first unbind the analogix_dp and then unregister the psr. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/76025075.yWNtk1v57f@phil
2018-03-01drm/rockchip: analogix_dp: Add a sanity check for rockchip_drm_psr_register()Jeffy Chen
The rockchip_drm_psr_register() can fail, so add a sanity check for that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> [moved psr_unregister reordering in unbind to separate patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-4-thierry.escande@collabora.com
2018-03-01drm/bridge: analogix_dp: Fix connector and encoder cleanupJeffy Chen
Since we are initing connector in the core driver and encoder in the plat driver, let's clean them up in the right places. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-3-thierry.escande@collabora.com
2018-03-01drm/bridge: analogix: Do not use device's drvdataJeffy Chen
The driver that instantiates the bridge should own the drvdata, as all driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also owned by its driver struct. Moreover, storing two different pointer types in driver data depending on driver initialization status is barely a good practice and in fact has led to many bugs in this driver. Let's clean up this mess and change Analogix entry points to simply accept some opaque struct pointer, adjusting their users at the same time to avoid breaking the compilation. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-2-thierry.escande@collabora.com
2018-03-01drm/rockchip: vop: Init vskiplines in scl_vop_cal_scale()Jeffy Chen
Currently we are calling scl_vop_cal_scale() to get vskiplines for yrgb and cbcr. So the cbcr's vskiplines might be an unexpected value if the second scl_vop_cal_scale() didn't update it. Init vskiplines in scl_vop_cal_scale() to avoid that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180223062250.10470-1-jeffy.chen@rock-chips.com
2018-03-01drm/rockchip: Add device links for master and componentsJeffy Chen
Since we are trying to access components' resources in the master's suspend/resume PM callbacks(e.g. panel), add device links to correct the suspend/resume and shutdown ordering. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180207175309.21095-1-enric.balletbo@collabora.com
2018-02-28tinydrm: add backlight dependencyArnd Bergmann
Calling devm_of_find_backlight directly means we get a link failure without CONFIG_BACKLIGHT_CLASS_DEVICE: drivers/gpu/drm/tinydrm/mi0283qt.o: In function `mi0283qt_probe': mi0283qt.c:(.text+0x684): undefined reference to `devm_of_find_backlight' This adds an explicit Kconfig dependency for it. While I did not observe that failure for st7735r, I assume the same change is needed there for the same reason. Fixes: d1a2e7004b5e ("drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180228134111.2042877-1-arnd@arndb.de
2018-02-28drm/uapi: The ctm matrix uses sign-magnitude representationVille Syrjälä
The documentation for the ctm matrix suggests a two's complement format, but at least the i915 implementation is using sign-magnitude instead. And looks like malidp is doing the same. Change the docs to match the current implementation, and change the type from __s64 to __u64 to drive the point home. Cc: dri-devel@lists.freedesktop.org Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Johnson Lin <johnson.lin@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-1-ville.syrjala@linux.intel.com Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2018-02-27drm/virtio: Add spaces around operatorsRodrigo Siqueira
This patch fixes the checkpatch.pl check: virtgpu_ioctl.c:535: CHECK: spaces preferred around that '|' (ctx:VxV) virtgpu_vq.c:277: CHECK: spaces preferred around that '+' (ctx:VxV) ... Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/8402b55696b44483ba2e1f6aaeb53bf709ffbfe7.1519343668.git.rodrigosiqueiramelo@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-27drm/virtio: Remove multiple blank linesRodrigo Siqueira
This patch fixes the checkpatch.pl check: virtgpu_drv.c:116: CHECK: Please don't use multiple blank lines virtgpu_vq.c:599: CHECK: Please don't use multiple blank lines virtgpu_prime.c:42: CHECK: Please don't use multiple blank lines Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/c43a006f2ed93a16fe824b4a2686a2d5e2ef56f5.1519343668.git.rodrigosiqueiramelo@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-27drm/virtio: Replace 'unsigned' for 'unsigned int'Rodrigo Siqueira
This patch fixes the checkpatch.pl warning: drivers/gpu/drm/virtio/virtgpu_display.c:64: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' ... Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/ac9c4110785e6519801d44c57d4f05c3e0cdad53.1519343668.git.rodrigosiqueiramelo@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-27drm/virtio: Remove return from void functionRodrigo Siqueira
This patch fixes the checkpatch.pl warning: virtgpu_ttm.c:181: WARNING: void function return statements are not generally useful ... Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/fd8dc6599c81c7aec6753c8552c1cabb7baa7577.1519343668.git.rodrigosiqueiramelo@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-27drm/virtio: Add */ in block comments to separate lineRodrigo Siqueira
This patch fixes the checkpatch.pl warning: virtgpu_ioctl.c:551: WARNING: Block comments use a trailing */ on a separate line ... Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/f0bd4104a7d26bf7561c3a2b4632041c5411f1f2.1519343668.git.rodrigosiqueiramelo@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-27drm/virtio: Add blank line after variable declarationsRodrigo Siqueira
This patch fixes the checkpatch.pl warnings: virtgpu_drv.c:57: WARNING: Missing a blank line after declarations virtgpu_display.c:99: WARNING: Missing a blank line after declarations ... Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/41767852ff9dc584c825e32db6222b9a311603b9.1519343668.git.rodrigosiqueiramelo@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-27drm/virtio: Add tabs at the start of a lineRodrigo Siqueira
This patch fixes the checkpatch.pl errors: drivers/gpu/drm/virtio/virtgpu_drv.h:371: ERROR: code indent should use tabs where possible ... Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1c77c233d4454ee2bdb85beaf17d413e310fac0a.1519343668.git.rodrigosiqueiramelo@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26drm: Include the header with the prototype for drm_get_panel_orientation_quirk()Ville Syrjälä
sparse complains: drivers/gpu/drm/drm_panel_orientation_quirks.c:133:5: warning: symbol 'drm_get_panel_orientation_quirk' was not declared. Should it be static? Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180226142423.26439-1-ville.syrjala@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2018-02-26drm/i915: Remove the pipe/plane ID checks from skl_check_ccs_aux_surface()Ville Syrjälä
The core now checks that the plane supports the fb's format+modifier combination, so we can drop the related checks from skl_check_ccs_aux_surface(). These checks were specific to SKL/KBL/BXT anyway. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-9-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2018-02-26drm: Check that the plane supports the request format+modifier comboVille Syrjälä
Currently we only check that the plane supports the pixel format of the fb we're about to feed to it. Extend it to check also the modifier, and more specifically that the combination of the format and modifier is supported. Cc: dri-devel@lists.freedesktop.org Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-8-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-02-26drm/pl111: Remove reverse dependency on DRM_DUMB_VGA_DACThierry Reding
DRM_DUMB_VGA_DAC is a user-visible symbol. Selecting it can cause unmet direct dependencies such as this (on i386, randconfig): warning: (DRM_PL111) selects DRM_DUMB_VGA_DAC which has unmet direct dependencies (HAS_IOMEM && DRM && DRM_BRIDGE && OF) This is because DRM_DUMB_VGA_DAC depends on OF while DRM_PL111 does not. It does indirectly depend on OF via the ARM and ARM64 dependencies, but since it can also be enabled under COMPILE_TEST, randconfig can find a case where DRM_PL111 is selected without pulling in OF and not meeting the dependency for DRM_DUMB_VGA_DAC. Since select is "heavy handed", DRM_DUMB_VGA_DAC is going to be enabled regardless of the above warning and causes the following build error: ../drivers/gpu/drm/bridge/dumb-vga-dac.c: In function 'dumb_vga_probe': ../drivers/gpu/drm/bridge/dumb-vga-dac.c:207:13: error: 'struct drm_bridge' has no member named 'of_node' vga->bridge.of_node = pdev->dev.of_node; See Documentation/kbuild/kconfig-language.txt, "reverse dependencies". Fixes: 49f81d80ab84 ("drm/pl111: Support handling bridge timings") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Archit Taneja <archit@cradlewise.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220102903.27787-1-thierry.reding@gmail.com
2018-02-23drm/stm: check pitch and size calculations even if !CONFIG_MMUBenjamin Gaignard
In all cases we have to check pitch and size calculations to speed up data transfer. Fixes: 21f815bf773c ("drm/stm: drv: Improve data transfers") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180131080508.14356-1-benjamin.gaignard@linaro.org
2018-02-23drm/panel: Fix ARM Versatile panel clocksLinus Walleij
These clocks are in kHz not in Hz, oops. Fix it so my new bandwidth calculations patch starts working with these panels. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180211103840.18764-1-linus.walleij@linaro.org
2018-02-22drm/pl111: Do not use deprecated drm_driver.{enable|disable)_vblankOleksandr Andrushchenko
Do not use deprecated drm_driver.{enable|disable)_vblank callbacks, but use drm_simple_kms_helpe's pipe callbacks instead. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-5-git-send-email-andr2000@gmail.com
2018-02-22drm/tve200: Do not use deprecated drm_driver.{enable|disable)_vblankOleksandr Andrushchenko
Do not use deprecated drm_driver.{enable|disable)_vblank callbacks, but use drm_simple_kms_helpe's pipe callbacks instead. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-4-git-send-email-andr2000@gmail.com
2018-02-22drm/mxsfb: Do not use deprecated drm_driver.{enable|disable)_vblankOleksandr Andrushchenko
Do not use deprecated drm_driver.{enable|disable)_vblank callbacks, but use drm_simple_kms_helpe's pipe callbacks instead. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-3-git-send-email-andr2000@gmail.com
2018-02-22drm/simple_kms_helper: Add {enable|disable}_vblank callback supportOleksandr Andrushchenko
If simple_kms_helper based driver needs to work with vblanks, then it has to provide drm_driver.{enable|disable}_vblank callbacks, because drm_simple_kms_helper.drm_crtc_funcs does not provide any. At the same time drm_driver.{enable|disable}_vblank callbacks are marked as deprecated and shouldn't be used by new drivers. Fix this by extending drm_simple_kms_helper.drm_crtc_funcs to provide the missing callbacks. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-2-git-send-email-andr2000@gmail.com
2018-02-22drm: fix drm_get_max_iomem type mismatchArnd Bergmann
When comparing two variables with min()/max(), they should be the same type: drivers/gpu/drm/drm_memory.c: In function 'drm_get_max_iomem': include/linux/kernel.h:821:16: error: comparison of distinct pointer types lacks a cast [-Werror] (void) (&max1 == &max2); This makes the local variable in drm_get_max_iomem make the type from resource->end. Fixes: 82626363a217 ("drm: add func to get max iomem address v2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180222114804.1394300-1-arnd@arndb.de
2018-02-22drm/simple_kms_helper: Fix NULL pointer dereference with no active CRTCOleksandr Andrushchenko
It is possible that drm_simple_kms_plane_atomic_check called with no CRTC set, e.g. when user-space application sets CRTC_ID/FB_ID to 0 before doing any actual drawing. This leads to NULL pointer dereference because in this case new CRTC state is NULL and must be checked before accessing. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1519279759-7803-1-git-send-email-andr2000@gmail.com
2018-02-22drm/sun4i: backend: Remove ARGB spoofingMaxime Ripard
We've had some code for quite some time to prevent the alpha bug from happening on the lowest primary plane. Since we now check for this in our atomic_check, we can simply remove it. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/965180afd8169ccaa848f061d16a2c1a9ec4d289.1518802627.git-series.maxime.ripard@bootlin.com
2018-02-22drm/sun4i: backend: Make zpos configurableMaxime Ripard
Now that we have everything in place, we can make zpos configurable now. Change the zpos property from an immutable one to a regular. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/0ab187956855db86972d936e6751181649e0d035.1518802627.git-series.maxime.ripard@bootlin.com
2018-02-22drm/sun4i: Remove the plane description structureMaxime Ripard
The plane description structure was mostly needed to differentiate the formats usable on the primary plane (because of its lowest position), and assign the pipes. Now that both are dynamically checked and assigned, we can remove the static definition. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/6b09e3698e692c3338f70a5ae1e5a580f9dd08ee.1518802627.git-series.maxime.ripard@bootlin.com
2018-02-22drm/sun4i: backend: Assign the pipes automaticallyMaxime Ripard
Since we now have a way to enforce the zpos, check for the number of alpha planes, the only missing part is to assign our pipe automatically instead of hardcoding it. The algorithm is quite simple, but requires two iterations over the list of planes. In the first one (which is the same one that we've had to check for alpha, the frontend usage, and so on), we order the planes by their zpos. We can then do a second iteration over that array by ascending zpos starting with the pipe 0. When and if we encounter our alpha plane, we put it and all the other subsequent planes in the second pipe. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/e9caf21d831438d36a3ccc7cef229c9a7ea7f69f.1518802627.git-series.maxime.ripard@bootlin.com
2018-02-20drm/mm: Fix caching of leftmost node in the interval treeChris Wilson
When we descend the tree to find our slot, if we step to the right, we are no longer the leftmost node. Fixes: f808c13fd373 ("lib/interval_tree: fast overlap detection") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> for now. Link: https://patchwork.freedesktop.org/patch/msgid/20180220093738.1461-1-chris@chris-wilson.co.uk
2018-02-20drm/omapdrm: Use of_find_backlight helperMeghana Madhyastha
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/eb914313f9d0e58d81572ccd3c718a573a891bd7.1516810726.git.meghana.madhyastha@gmail.com
2018-02-20drm/panel: Use of_find_backlight helperMeghana Madhyastha
Replace of_find_backlight_by_node and of the code around it with of_find_backlight helper to avoid repetition of code. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/140d01afb138d687680b2d1776a4c101c9fa9a0a.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/omapdrm: Use backlight_enable/disable helpersMeghana Madhyastha
Use backlight_enable/disable helpers instead of changing the property and calling backlight_update_status for cleaner and simpler code and also to avoid repetitions. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/30d5b26c3c7d75de3d2ab3cff9dee67084fc3caf.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/panel: Use backlight_enable/disable helpersMeghana Madhyastha
Use backlight_enable/disable helpers instead of changing the property and calling backlight_update_status for cleaner and simpler code and also to avoid repetitions. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/bc80cdb5cf1a6638dce9fb9f8da674e361e3b749.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/tinydrm: Call devres version of of_find_backlightMeghana Madhyastha
Call devm_of_find_backlight (the devres version) instead of of_find_backlight. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/244cd4d567cb3944a8cb7633715ffc8ac4e1ce83.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlightMeghana Madhyastha
Remove tinydrm_of_find_backlight from tinydrm-helpers.c. We now have a generic of_find_backlight defined in backlight.c. Let the callers of tinydrm_of_find_backlight call of_find_backlight. Also, remove select BACKLIGHT_LCD_SUPPORT and select BACKLIGHT_CLASS_DEVICE from tinydrm/Kconfig as it is a hack that is no longer needed. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/11dd1cabd098a730d07ab04c5987b139d14d8b21.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20drm/tinydrm: Convert tinydrm_enable/disable_backlight to ↵Meghana Madhyastha
backlight_enable/disable Remove tinydrm_enable/disable_backlight and let the callers call the more generic backlight_enable/disable helpers Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/ec700724e47814e6426966e093bd32b2364ba147.1516810725.git.meghana.madhyastha@gmail.com
2018-02-20Merge tag 'topic/backlight_for_lag-2018-01-29' of ↵Sean Paul
git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next This contains the backlight portion of Meghana Madhyastha's patch set to migrate the backlight helpers from tinydrm to the backlight subsystem. https://patchwork.freedesktop.org/series/36522/ Cc: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> # gpg: Signature made Mon 29 Jan 2018 02:25:40 PM EST # gpg: using RSA key 7F17297CC4A076740CB3E42A96F70DFDA84A070A # gpg: Good signature from "Sean Paul <seanpaul@chromium.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 1C5E AB9E D7C9 DDE9 E7F2 087C 732C 0025 72DC AF79 # Subkey fingerprint: 7F17 297C C4A0 7674 0CB3 E42A 96F7 0DFD A84A 070A Link: https://patchwork.freedesktop.org/patch/msgid/20180129192950.bvmhkz3h42t5a25r@art_vandelay
2018-02-20drm: add documentation for tv connector state marginsJani Nikula
A bit boring documentation fix, but gets rid of the warnings: ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.left' not described in 'drm_tv_connector_state' ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.right' not described in 'drm_tv_connector_state' ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.top' not described in 'drm_tv_connector_state' ./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.bottom' not described in 'drm_tv_connector_state' [Depends on fe7bc493d979 ("scripts: kernel-doc: support in-line comments on nested structs/unions") in docs-next to actually fix the warnings.] Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219104009.4887-1-jani.nikula@intel.com
2018-02-20drm/doc: Use new substruct supportDaniel Vetter
Support for this just recently landed in linux-next. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-5-daniel.vetter@ffwll.ch
2018-02-20drm/doc: Polish for drm_mode_parse_command_line_for_connectorDaniel Vetter
Quoting the module option format looks soo much nicer, and avoids sphinx spewing errors about markup issues. v2: Fix typo in commit message (Thierry). Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-4-daniel.vetter@ffwll.ch
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:50:54 +0000