| Age | Commit message (Collapse) | Author |
|---|
|
Now that there's one meta data at the start of the persistent memory used by
the ring buffer, allow the caller to request some memory right after that
data that it can use as its own persistent memory.
Also fix some white space issues with ring_buffer_alloc().
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.619631731@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Instead of just having a meta data at the first page of each sub buffer
that has duplicate data, add a new meta page to the entire block of memory
that holds the duplicate data and remove it from the sub buffer meta data.
This will open up the extra memory in this first page to be used by the
tracer for its own persistent data.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.446351513@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Instead of saving off the text and data pointers and using them to compare
with the current boot's text and data pointers, just save off the KASLR
offset. Then that can be used to figure out how to read the previous boots
buffer.
The last_boot_info will now show this offset, but only if it is for a
previous boot:
~# cat instances/boot_mapped/last_boot_info
39000000 [kernel]
~# echo function > instances/boot_mapped/current_tracer
~# cat instances/boot_mapped/last_boot_info
# Current
If the KASLR offset saved is for the current boot, the last_boot_info will
show the value of "current".
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.274956504@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The calculation of bytes-dropped and bytes_dropped_nested is reversed.
Although it does not affect the final calculation of total_dropped,
it should still be modified.
Link: https://lore.kernel.org/20250223070106.6781-1-yangfeng59949@163.com
Fixes: 6c43e554a2a5 ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When verify_sha256_digest() fails, __apply_microcode_amd() should propagate
the failure by returning false (and not -1 which is promoted to true).
Fixes: 50cef76d5cb0 ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250327230503.1850368-2-boris.ostrovsky@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- remove unused include of linux/fb.h
- use strscpy() instead of strncpy()
* tag 'm68knommu-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: mm: Replace deprecated strncpy() with strscpy()
m68k: Do not include <linux/fb.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- Improve the ftracetest selftests:
- Expand the tprobe event test to check if it can correctly find the
wrong format tracepoint name.
- Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
- Add a new dynamic events argument limitation test case which
checks max number of probe arguments.
* tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Add comments about entry data storing code
selftests/ftrace: Add dynamic events argument limitation test case
selftests/ftrace: Add new syntax error test
selftests/ftrace: Expand the tprobe event test to check wrong format
tracing: probe-events: Log error for exceeding the number of arguments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Add a selftest for tracing of a livepatched function
- Skip a selftest when kprobes are not using ftrace
- Some documentation clean up
* tag 'livepatching-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: test if ftrace can trace a livepatched function
selftests: livepatch: add new ftrace helpers functions
selftest/livepatch: Only run test-kprobe with CONFIG_KPROBES_ON_FTRACE
docs: livepatch: move text out of code block
livepatch: Add comment to clarify klp_add_nops()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- New option "printk.debug_non_panic_cpus" allows to store printk
messages from non-panic CPUs during panic. It might be useful when
panic() fails. It is disabled by default because it increases the
chance to see the messages printed before panic() and on the
panic-CPU.
- New build option "CONFIG_NULL_TTY_DEFAULT_CONSOLE" allows to build
kernel without the virtual terminal support which prefers ttynull
over serial console.
- Do not unblank suspended consoles.
- Some code clean up.
* tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/panic: Add option to allow non-panic CPUs to write to the ring buffer.
printk: Add an option to allow ttynull to be a default console device
printk: Check CON_SUSPEND when unblanking a console
printk: Rename console_start to console_resume
printk: Rename console_stop to console_suspend
printk: Rename resume_console to console_resume_all
printk: Rename suspend_console to console_suspend_all
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"kunit tool:
- Changes to kunit tool to use qboot on QEMU x86_64, and build GDB
scripts
- Fixes kunit tool bug in parsing test plan
- Adds test to kunit tool to check parsing late test plan
kunit:
- Clarifies kunit_skip() argument name
- Adds Kunit check for the longest symbol length
- Changes qemu_configs for sparc to use Zilog console"
* tag 'linux_kselftest-kunit-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: add test to check parsing late test plan
kunit: tool: Fix bug in parsing test plan
Kunit to check the longest symbol length
kunit: Clarify kunit_skip() argument name
kunit: tool: Build GDB scripts
kunit: qemu_configs: sparc: use Zilog console
kunit: tool: Use qboot on QEMU x86_64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- Fix bugs and clean up code in tracing, ftrace, and user_events tests
- Add missing executables to ftrace gitignore
* tag 'linux_kselftest-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: add 'poll' binary to gitignore
selftests/ftrace: Use readelf to find entry point in uprobe test
selftests/user_events: Fix failures caused by test code
selftests/tracing: Allow some more tests to run in instances
selftests/ftrace: Clean up triggers after setting them
selftests/tracing: Test only toplevel README file not the instances
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest update from Steven Rostedt:
- Fix failure of directory of log file not existing
If a LOG_FILE option is set for ktest to log its messages, and the
directory path does not exist. Then ktest fails. Have ktest attempt
to create the directory where the log file exists and if that
succeeds continue on testing.
* tag 'ktest-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix Test Failures Due to Missing LOG_FILE Directories
|
|
r_count is only increased when there is an oplock break wait,
so r_count inc/decrement are not paired. This can cause r_count
to become negative, which can lead to a problem where the ksmbd
thread does not terminate.
Fixes: 3aa660c05924 ("ksmbd: prevent connection release during oplock break notification")
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd check that the session of second channel is in the session list of
first connection. If it is in session list, multichannel connection
should not be allowed.
Fixes: b95629435b84 ("ksmbd: fix racy issue from session lookup and expire")
Reported-by: Sean Heelan <seanheelan@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In multichannel mode, UAF issue can occur in session_deregister
when the second channel sets up a session through the connection of
the first channel. session that is freed through the global session
table can be accessed again through ->sessions of connection.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ULPs are not supposed to call to ops.* directly.
Suggested-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use aead_request_free() instead of kfree() to properly free memory
allocated by aead_request_alloc(). This ensures sensitive crypto data
is zeroed before being freed.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd_rdma_capable_netdev()"
This reverts commit ecce70cf17d91c3dd87a0c4ea00b2d1387729701.
Revert the GUID trick code causing the layering violation.
I will try to allow the users to turn RDMA-capable on/off via sysfs later
Cc: Kangjing Huang <huangkangjing@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add missing bounds check for create lease context.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tooling updates from Steven Rostedt:
- Allow RTLA to collect data via BPF
The current implementation of rtla uses libtracefs and libtraceevent
to pull sample events generated by the timerlat tracer from the trace
buffer. rtla then processes the sample by updating the histogram and
summary (current, maximum, minimum, and sum values) as well as checks
if tracing has been stopped due to threshold overflow.
In use cases where a large number of samples is being generated, that
is, with measurements running on many CPUs and with a low interval,
this sample processing design causes a significant CPU load on the
rtla side. Furthermore, with >100 CPUs and 100us interval, rtla was
reported as not being able to keep up with the samples and dropping
most of them, leading to it being unusable.
Change the way the timerlat trace processes samples by attaching a
BPF program to the trace event using the BPF skeleton feature of
bpftool. Unlike the current implementation, the BPF implementation
does not check whether tracing is stopped (in BPF mode, tracing is
always off to improve performance), but waits for a write to a BPF
ringbuffer instead. This allows rtla to exit immediately when a
threshold is violated, without waiting for the next iteration of the
while loop.
If the requirements for the BPF implementation are not met, either at
build time or at run time, the current implementation is used as
fallback. Which implementation is being used can be seen when running
rtla timerlat with "-D" option. rtla can be forced to run in non-BPF
mode by setting the RTLA_NO_BPF option to 1, for debugging purposes.
- Fix LD_FLAGS from being dropped in build
- Refactor code to remove duplication of save_trace_to_file
- Always set options and do not rely on default settings
Do not rely on the default kernel settings of the tracers when
starting. They could have been changed by the user which gives
inconsistent results. Always set the options that rtla expects.
- Add creation of ctags and TAGS for traversing code
* tag 'trace-tools-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Add the ability to create ctags and etags
rtla/tests: Test setting default options
rtla/tests: Reset osnoise options before check
rtla: Always set all tracer options
rtla/osnoise: Set OSNOISE_WORKLOAD to true
rtla: Unify apply_config between top and hist
rtla/osnoise: Unify params struct
rtla: Fix segfault in save_trace_to_file call
tools/build: Use SYSTEM_BPFTOOL for system bpftool
rtla: Refactor save_trace_to_file
tools/rv: Keep user LDFLAGS in build
rtla/timerlat: Test BPF mode
rtla/timerlat_top: Use BPF to collect samples
rtla/timerlat_top: Move divisor to update
rtla/timerlat_hist: Use BPF to collect samples
rtla/timerlat: Add BPF skeleton to collect samples
rtla: Add optional dependency on BPF tooling
tools/build: Add bpftool-skeletons feature test
rtla/timerlat: Unify params struct
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add option traceoff_after_boot
In order to debug kernel boot, it sometimes is helpful to enable
tracing via the kernel command line. Unfortunately, by the time the
login prompt appears, the trace is overwritten by the init process
and other user space start up applications.
Adding a "traceoff_after_boot" will disable tracing when the kernel
passes control to init which will allow developers to be able to see
the traces that occurred during boot.
- Clean up the mmflags macros that display the GFP flags in trace
events
The macros to print the GFP flags for trace events had a bit of
duplication. The code was restructured to remove duplication and in
the process it also adds some flags that were missed before.
- Removed some dead code and scripts/draw_functrace.py
draw_functrace.py hasn't worked in years and as nobody complained
about it, remove it.
- Constify struct event_trigger_ops
The event_trigger_ops is just a structure that has function pointers
that are assigned when the variables are created. These variables
should all be constants.
- Other minor clean ups and fixes
* tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Replace strncpy with memcpy for fixed-length substring copy
tracing: Fix synth event printk format for str fields
tracing: Do not use PERF enums when perf is not defined
tracing: Ensure module defining synth event cannot be unloaded while tracing
tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER
tracing/osnoise: Fix possible recursive locking for cpus_read_lock()
tracing: Align synth event print fmt
tracing: gfp: vsprintf: Do not print "none" when using %pGg printf format
tracepoint: Print the function symbol when tracepoint_debug is set
tracing: Constify struct event_trigger_ops
scripts/tracing: Remove scripts/tracing/draw_functrace.py
tracing: Update MAINTAINERS file to include tracepoint.c
tracing/user_events: Slightly simplify user_seq_show()
tracing/user_events: Don't use %pK through printk
tracing: gfp: Remove duplication of recording GFP flags
tracing: Remove orphaned event_trace_printk
ring-buffer: Fix typo in comment about header page pointer
tracing: Add traceoff_after_boot option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Record function parameters for function and function graph tracers
An option has been added to function tracer (func-args) and the
function graph tracer (funcgraph-args) that when set, the tracers
will record the registers that hold the arguments into each function
event. On reading of the trace, it will use BTF to print those
arguments. Most archs support up to 6 arguments (depending on the
complexity of the arguments) and those are printed.
If a function has more arguments then what was recorded, the output
will end with " ... )".
Example of function graph tracer:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
- The rest of the changes are minor clean ups and fixes
* tag 'ftrace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use hashtable.h for event_hash
tracing: Fix use-after-free in print_graph_function_flags during tracer switching
function_graph: Remove the unused variable func
ftrace: Add arguments to function tracer
ftrace: Have funcgraph-args take affect during tracing
ftrace: Add support for function argument to graph tracer
ftrace: Add print_function_args()
ftrace: Have ftrace_free_filter() WARN and exit if ops is active
fgraph: Correct typo in ftrace_return_to_handler comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing / sorttable updates from Steven Rostedt:
- Implement arm64 build time sorting of the mcount location table
When gcc is used to build arm64, the mcount_loc section is all zeros
in the vmlinux elf file. The addresses are stored in the Elf_Rela
location.
To sort at build time, an array is allocated and the addresses are
added to it via the content of the mcount_loc section as well as he
Elf_Rela data. After sorting, the information is put back into the
Elf_Rela which now has the section sorted.
- Make sorting of mcount location table for arm64 work with clang as
well
When clang is used, the mcount_loc section contains the addresses,
unlike the gcc build. An array is still created and the sorting works
for both methods.
- Remove weak functions from the mcount_loc section
Have the sorttable code pass in the data of functions defined via
'nm -S' which shows the functions as well as their sizes. Using this
information the sorttable code can determine if a function in the
mcount_loc section was weak and overridden. If the function is not
found, it is set to be zero. On boot, when the mcount_loc section is
read and the ftrace table is created, if the address in the
mcount_loc is not in the kernel core text then it is removed and not
added to the ftrace_filter_functions (the functions that can be
attached by ftrace callbacks).
- Update and fix the reporting of how much data is used for ftrace
functions
On boot, a report of how many pages were used by the ftrace table as
well as how they were grouped (the table holds a list of sections
that are groups of pages that were able to be allocated). The
removing of the weak functions required the accounting to be updated.
* tag 'trace-sorttable-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/sorttable: Allow matches to functions before function entry
scripts/sorttable: Use normal sort if theres no relocs in the mcount section
ftrace: Check against is_kernel_text() instead of kaslr_offset()
ftrace: Test mcount_loc addr before calling ftrace_call_addr()
ftrace: Have ftrace pages output reflect freed pages
ftrace: Update the mcount_loc check of skipped entries
scripts/sorttable: Zero out weak functions in mcount_loc table
scripts/sorttable: Always use an array for the mcount_loc sorting
scripts/sorttable: Have mcount rela sort use direct values
arm64: scripts/sorttable: Implement sorting mcount_loc at boot for arm64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Ext4 bug fixes and cleanups, including:
- hardening against maliciously fuzzed file systems
- backwards compatibility for the brief period when we attempted to
ignore zero-width characters
- avoid potentially BUG'ing if there is a file system corruption
found during the file system unmount
- fix free space reporting by statfs when project quotas are enabled
and the free space is less than the remaining project quota
Also improve performance when replaying a journal with a very large
number of revoke records (applicable for Lustre volumes)"
* tag 'ext4-for_linus-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (71 commits)
ext4: fix OOB read when checking dotdot dir
ext4: on a remount, only log the ro or r/w state when it has changed
ext4: correct the error handle in ext4_fallocate()
ext4: Make sb update interval tunable
ext4: avoid journaling sb update on error if journal is destroying
ext4: define ext4_journal_destroy wrapper
ext4: hash: simplify kzalloc(n * 1, ...) to kzalloc(n, ...)
jbd2: add a missing data flush during file and fs synchronization
ext4: don't over-report free space or inodes in statvfs
ext4: clear DISCARD flag if device does not support discard
jbd2: remove jbd2_journal_unfile_buffer()
ext4: reorder capability check last
ext4: update the comment about mb_optimize_scan
jbd2: fix off-by-one while erasing journal
ext4: remove references to bh->b_page
ext4: goto right label 'out_mmap_sem' in ext4_setattr()
ext4: fix out-of-bound read in ext4_xattr_inode_dec_ref_all()
ext4: introduce ITAIL helper
jbd2: remove redundant function jbd2_journal_has_csum_v2or3_feature
ext4: remove redundant function ext4_has_metadata_csum
...
|
|
Pull bcachefs updates from Kent Overstreet:
"On disk format is now soft frozen: no more required/automatic are
anticipated before taking off the experimental label.
Major changes/features since 6.14:
- Scrub
- Blocksize greater than page size support
- A number of "rebalance spinning and doing no work" issues have been
fixed; we now check if the write allocation will succeed in
bch2_data_update_init(), before kicking off the read.
There's still more work to do in this area. Later we may want to
add another bitset btree, like rebalance_work, to track "extents
that rebalance was requested to move but couldn't", e.g. due to
destination target having insufficient online devices.
- We can now support scaling well into the petabyte range: latest
bcachefs-tools will pick an appropriate bucket size at format time
to ensure fsck can run in available memory (e.g. a server with
256GB of ram and 100PB of storage would want 16MB buckets).
On disk format changes:
- 1.21: cached backpointers (scalability improvement)
Cached replicas now get backpointers, which means we no longer rely
on incrementing bucket generation numbers to invalidate cached
data: this lets us get rid of the bucket generation number garbage
collection, which had to periodically rescan all extents to
recompute bucket oldest_gen.
Bucket generation numbers are now only used as a consistency check,
but they're quite useful for that.
- 1.22: stripe backpointers
Stripes now have backpointers: erasure coded stripes have their own
checksums, separate from the checksums for the extents they contain
(and stripe checksums also cover the parity blocks). This is
required for implementing scrub for stripes.
- 1.23: stripe lru (scalability improvement)
Persistent lru for stripes, ordered by "number of empty blocks".
This is used by the stripe creation path, which depending on free
space may create a new stripe out of a partially empty existing
stripe instead of starting a brand new stripe.
This replaces an in-memory heap, and means we no longer have to
read in the stripes btree at startup.
- 1.24: casefolding
Case insensitive directory support, courtesy of Valve.
This is an incompatible feature, to enable mount with
-o version_upgrade=incompatible
- 1.25: extent_flags
Another incompatible feature requiring explicit opt-in to enable.
This adds a flags entry to extents, and a flag bit that marks
extents as poisoned.
A poisoned extent is an extent that was unreadable due to checksum
errors. We can't move such extents without giving them a new
checksum, and we may have to move them (for e.g. copygc or device
evacuate). We also don't want to delete them: in the future we'll
have an API that lets userspace ignore checksum errors and attempt
to deal with simple bitrot itself. Marking them as poisoned lets us
continue to return the correct error to userspace on normal read
calls.
Other changes/features:
- BCH_IOCTL_QUERY_COUNTERS: this is used by the new 'bcachefs fs top'
command, which shows a live view of all internal filesystem
counters.
- Improved journal pipelining: we can now have 16 journal writes in
flight concurrently, up from 4. We're logging significantly more to
the journal than we used to with all the recent disk accounting
changes and additions, so some users should see a performance
increase on some workloads.
- BCH_MEMBER_STATE_failed: previously, we would do no IO at all to
devices marked as failed. Now we will attempt to read from them,
but only if we have no better options.
- New option, write_error_timeout: devices will be kicked out of the
filesystem if all writes have been failing for x number of seconds.
We now also kick devices out when notified by blk_holder_ops that
they've gone offline.
- Device option handling improvements: the discard option should now
be working as expected (additionally, in -tools, all device options
that can be set at format time can now be set at device add time,
i.e. data_allowed, state).
- We now try harder to read data after a checksum error: we'll do
additional retries if necessary to a device after after it gave us
data with a checksum error.
- More self healing work: the full inode <-> dirent consistency
checks that are currently run by fsck are now also run every time
we do a lookup, meaning we'll be able to correct errors at runtime.
Runtime self healing will be flipped on after the new changes have
seen more testing, currently they're just checking for consistency.
- KMSAN fixes: our KMSAN builds should be nearly clean now, which
will put a massive dent in the syzbot dashboard"
* tag 'bcachefs-2025-03-24' of git://evilpiepirate.org/bcachefs: (180 commits)
bcachefs: Kill unnecessary bch2_dev_usage_read()
bcachefs: btree node write errors now print btree node
bcachefs: Fix race in print_chain()
bcachefs: btree_trans_restart_foreign_task()
bcachefs: bch2_disk_accounting_mod2()
bcachefs: zero init journal bios
bcachefs: Eliminate padding in move_bucket_key
bcachefs: Fix a KMSAN splat in btree_update_nodes_written()
bcachefs: kmsan asserts
bcachefs: Fix kmsan warnings in bch2_extent_crc_pack()
bcachefs: Disable asm memcpys when kmsan enabled
bcachefs: Handle backpointers with unknown data types
bcachefs: Count BCH_DATA_parity backpointers correctly
bcachefs: Run bch2_check_dirent_target() at lookup time
bcachefs: Refactor bch2_check_dirent_target()
bcachefs: Move bch2_check_dirent_target() to namei.c
bcachefs: fs-common.c -> namei.c
bcachefs: EIO cleanup
bcachefs: bch2_write_prep_encoded_data() now returns errcode
bcachefs: Simplify bch2_write_op_error()
...
|
|
Pull jfs updates from David Kleikamp:
"Various bug fixes and cleanups for JFS"
* tag 'jfs-6.14' of github.com:kleikamp/linux-shaggy:
jfs: add index corruption check to DT_GETPAGE()
fs/jfs: consolidate sanity checking in dbMount
jfs: add sanity check for agwidth in dbMount
jfs: Prevent copying of nlink with value 0 from disk inode
fs/jfs: Prevent integer overflow in AG size calculation
fs/jfs: cast inactags to s64 to prevent potential overflow
jfs: Fix uninit-value access of imap allocated in the diMount() function
jfs: fix slab-out-of-bounds read in ea_get()
jfs: add check read-only before truncation in jfs_truncate_nolock()
jfs: add check read-only before txBeginAnon() call
jfs: reject on-disk inodes of an unsupported type
jfs: Remove reference to bh->b_page
jfs: Delete a couple tabs in jfs_reconfigure()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs update from Mike Marshall:
- remove two orangefs bufmap routines that no longer have callers
* tag 'for-linus-6.15-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: Bufmap deadcoding
|
|
Pull xfs updates from Carlos Maiolino:
- XFS zoned allocator: Enables XFS to support zoned devices using its
real-time allocator
- Use folios/vmalloc for buffer cache backing memory
- Some code cleanups and bug fixes
* tag 'xfs-6.15-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (70 commits)
xfs: remove the flags argument to xfs_buf_get_uncached
xfs: remove the flags argument to xfs_buf_read_uncached
xfs: remove xfs_buf_free_maps
xfs: remove xfs_buf_get_maps
xfs: call xfs_buf_alloc_backing_mem from _xfs_buf_alloc
xfs: remove unnecessary NULL check before kvfree()
xfs: don't wake zone space waiters without m_zone_info
xfs: don't increment m_generation for all errors in xfs_growfs_data
xfs: fix a missing unlock in xfs_growfs_data
xfs: Remove duplicate xfs_rtbitmap.h header
xfs: trigger zone GC when out of available rt blocks
xfs: trace what memory backs a buffer
xfs: cleanup mapping tmpfs folios into the buffer cache
xfs: use vmalloc instead of vm_map_area for buffer backing memory
xfs: buffer items don't straddle pages anymore
xfs: kill XBF_UNMAPPED
xfs: convert buffer cache to use high order folios
xfs: remove the kmalloc to page allocator fallback
xfs: refactor backing memory allocations for buffers
xfs: remove xfs_buf_is_vmapped
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- two fixes to the recent rcu lookup optimizations
- a change allowing TCP to be configured with the first of multiple IP
address
* tag 'dlm-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: make tcp still work in multi-link env
dlm: fix error if active rsb is not hashed
dlm: fix error if inactive rsb is not hashed
dlm: prevent NPD when writing a positive value to event_done
dlm: increase max number of links for corosync3/knet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, there are three major updates: (1) folio conversion,
(2) refactoring for mount API conversion, (3) some performance
improvement such as direct IO, checkpoint speed, and IO priority
hints.
For stability, there are patches which add more sanity checks and
fixes some major issues like i_size in atomic write operations and
write pointer recovery in zoned devices.
Enhancements:
- huge folio converion work by Matthew Wilcox
- clean up for mount API conversion by Eric Sandeen
- improve direct IO speed in the overwrite case
- add some sanity check on node consistency
- set highest IO priority for checkpoint thread
- keep POSIX_FADV_NOREUSE ranges and add sysfs entry to reclaim pages
- add ioctl to get IO priority hint
- add carve_out sysfs node for fsstat
Bug fixes:
- disable nat_bits during umount to avoid potential nat entry corruption
- fix missing i_size update on atomic writes
- fix missing discard for active segments
- fix running out of free segments
- fix out-of-bounds access in f2fs_truncate_inode_blocks()
- call f2fs_recover_quota_end() correctly
- fix potential deadloop in prepare_compress_overwrite()
- fix the missing write pointer correction for zoned device
- fix to avoid panic once fallocation fails for pinfile
- don't retry IO for corrupted data scenario
There are many other clean up patches and minor bug fixes as usual"
* tag 'f2fs-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits)
f2fs: fix missing discard for active segments
f2fs: optimize f2fs DIO overwrites
f2fs: fix to avoid atomicity corruption of atomic file
f2fs: pass sbi rather than sb to parse_options()
f2fs: pass sbi rather than sb to quota qf_name helpers
f2fs: defer readonly check vs norecovery
f2fs: Pass sbi rather than sb to f2fs_set_test_dummy_encryption
f2fs: make LAZYTIME a mount option flag
f2fs: make INLINECRYPT a mount option flag
f2fs: factor out an f2fs_default_check function
f2fs: consolidate unsupported option handling errors
f2fs: use f2fs_sb_has_device_alias during option parsing
f2fs: add carve_out sysfs node
f2fs: fix to avoid running out of free segments
f2fs: Remove f2fs_write_node_page()
f2fs: Remove f2fs_write_meta_page()
f2fs: Remove f2fs_write_data_page()
f2fs: Remove check for ->writepage
Revert "f2fs: rebuild nat_bits during umount"
f2fs: fix to avoid accessing uninitialized curseg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes:
- fall back to buffered write if direct io is done on a file that
requires checksums
- this avoids a problem with checksum mismatch errors, observed
e.g. on virtual images when writes to pages under writeback
cause the checksum mismatch reports
- this may lead to some performance degradation but currently the
recommended setup for VM images is to use the NOCOW file
attribute that also disables checksums
- fast/realtime zstd levels -15 to -1
- supported by mount options (compress=zstd:-5) and defrag ioctl
- improved speed, reduced compression ratio, check the commit for
sample measurements
- defrag ioctl extended to accept negative compression levels
- subpage mode
- remove warning when subpage mode is used, the feature is now
reasonably complete and tested
- in debug mode allow to create 2K b-tree nodes to allow testing
subpage on x86_64 with 4K pages too
Performance improvements:
- in send, better file path caching improves runtime (on sample load
by -30%)
- on s390x with hardware zlib support prepare the input buffer in a
better way to get the best results from the acceleration
- minor speed improvement in encoded read, avoid memory allocation in
synchronous mode
Core:
- enable stable writes on inodes, replacing manually waiting for
writeback and allowing to skip that on inodes without checksums
- add last checks and warnings for out-of-band dirty writes to pages,
requiring a fixup ("fixup worker"), this should not be necessary
since 5.8 where get_user_page() and pin_user_pages*() prevent this
- long history behind that, we'll be happy to remove the whole
infrastructure in the near future
- more folio API conversions and preparations for large folio support
- subpage cleanups and refactoring, split handling of data and
metadata to allow future support for large folios
- readpage works as block-by-block, no change for normal mode, this
is preparation for future subpage updates
- block group refcount fixes and hardening
- delayed iput fixes
- in zoned mode, fix zone activation on filesystem with missing
devices
Cleanups:
- inode parameter cleanups
- path auto-freeing updates
- code flow simplifications in send
- redundant parameter cleanups"
* tag 'for-6.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (164 commits)
btrfs: zoned: fix zone finishing with missing devices
btrfs: zoned: fix zone activation with missing devices
btrfs: remove end_no_trans label from btrfs_log_inode_parent()
btrfs: simplify condition for logging new dentries at btrfs_log_inode_parent()
btrfs: remove redundant else statement from btrfs_log_inode_parent()
btrfs: use memcmp_extent_buffer() at replay_one_extent()
btrfs: update outdated comment for overwrite_item()
btrfs: use variables to store extent buffer and slot at overwrite_item()
btrfs: avoid unnecessary memory allocation and copy at overwrite_item()
btrfs: don't clobber ret in btrfs_validate_super()
btrfs: prepare btrfs_page_mkwrite() for large folios
btrfs: prepare extent_io.c for future large folio support
btrfs: prepare btrfs_launcher_folio() for large folios support
btrfs: replace PAGE_SIZE with folio_size for subpage.[ch]
btrfs: add a size parameter to btrfs_alloc_subpage()
btrfs: subpage: make btrfs_is_subpage() check against a folio
btrfs: add extra warning if delayed iput is added when it's not allowed
btrfs: avoid redundant path slot assignment in btrfs_search_forward()
btrfs: remove unnecessary btrfs_key local variable in btrfs_search_forward()
btrfs: simplify the return value handling in search_ioctl()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, EROFS 48-bit block addressing is available to support
massive datasets for model training and other large data archive use
cases.
In addition, byte-oriented encoded extents have been supported to
reduce metadata sizes when using large configurations as well as to
improve Zstd compression speed.
There are some bugfixes and cleanups as usual.
Summary:
- Support 48-bit block addressing for large images
- Introduce encoded extents to reduce metadata on larger pclusters
- Enable unaligned compressed data to improve Zstd compression speed
- Allow 16-byte volume names again
- Minor cleanups"
* tag 'erofs-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: enable 48-bit layout support
erofs: support unaligned encoded data
erofs: implement encoded extent metadata
erofs: add encoded extent on-disk definition
erofs: initialize decompression early
erofs: support dot-omitted directories
erofs: implement 48-bit block addressing for unencoded inodes
erofs: add 48-bit block addressing on-disk support
erofs: simplify erofs_{read,fill}_inode()
erofs: get rid of erofs_map_blocks_flatmode()
erofs: move {in,out}pages into struct z_erofs_decompress_req
erofs: clean up header parsing for ztailpacking and fragments
erofs: simplify tail inline pcluster handling
erofs: allow 16-byte volume name again
erofs: get rid of erofs_kmap_type
erofs: use Z_EROFS_LCLUSTER_TYPE_MAX to simplify switches
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Fix two bugs related to locking request cancelation (locking request
being retried instead of canceled; canceling the wrong locking
request)
- Prevent a race between inode creation and deferred delete analogous
to commit ffd1cf0443a2 from 6.13. This now allows to further simplify
gfs2_evict_inode() without introducing mysterious problems
- When in inode delete should be verified / retried "later" but that
isn't possible, skip the delete instead of carrying it out
immediately. This broke in 6.13
- More folio conversions from Matthew Wilcox (plus a fix from Dan
Carpenter)
- Various minor fixes and cleanups
* tag 'gfs2-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (22 commits)
gfs2: some comment clarifications
gfs2: Fix a NULL vs IS_ERR() bug in gfs2_find_jhead()
gfs2: Convert gfs2_meta_read_endio() to use a folio
gfs2: Convert gfs2_end_log_write_bh() to work on a folio
gfs2: Convert gfs2_find_jhead() to use a folio
gfs2: Convert gfs2_jhead_pg_srch() to gfs2_jhead_folio_search()
gfs2: Use b_folio in gfs2_check_magic()
gfs2: Use b_folio in gfs2_submit_bhs()
gfs2: Use b_folio in gfs2_trans_add_meta()
gfs2: Use b_folio in gfs2_log_write_bh()
gfs2: skip if we cannot defer delete
gfs2: remove redundant warnings
gfs2: minor evict fix
gfs2: Prevent inode creation race (2)
gfs2: Fix additional unlikely request cancelation race
gfs2: Fix request cancelation bug
gfs2: Check for empty queue in run_queue
gfs2: Remove more dead code in add_to_queue
gfs2: Replace GIF_DEFER_DELETE with GLF_DEFER_DELETE
gfs2: glock holder GL_NOPID fix
...
|
|
This makes it easier to pinpoint where the error happened. For example:
FIT arch/powerpc/boot/image.fit
Error processing arch/powerpc/boot/dts/microwatt.dtb:
Traceback (most recent call last):
File "/home/jn/dev/linux/linux-git/build-mpc83xx/../scripts/make_fit.py", line 335, in <module>
sys.exit(run_make_fit())
^^^^^^^^^^^^^^
File "/home/jn/dev/linux/linux-git/build-mpc83xx/../scripts/make_fit.py", line 309, in run_make_fit
out_data, count, size = build_fit(args)
^^^^^^^^^^^^^^^
File "/home/jn/dev/linux/linux-git/build-mpc83xx/../scripts/make_fit.py", line 286, in build_fit
raise e
File "/home/jn/dev/linux/linux-git/build-mpc83xx/../scripts/make_fit.py", line 283, in build_fit
(model, compat, files) = process_dtb(fname, args)
^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/jn/dev/linux/linux-git/build-mpc83xx/../scripts/make_fit.py", line 231, in process_dtb
model = fdt.getprop(0, 'model').as_str()
^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/libfdt.py", line 448, in getprop
pdata = check_err_null(fdt_getprop(self._fdt, nodeoffset, prop_name),
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/libfdt.py", line 153, in check_err_null
raise FdtException(val)
libfdt.FdtException: pylibfdt error -1: FDT_ERR_NOTFOUND
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250209-makefit-v1-1-bfe6151e8f0a@posteo.net
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the device tree bindings for the Altera SoCFPGA ECC
Manager from text to yaml.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://lore.kernel.org/r/20250325173139.27634-1-matthew.gerlach@altera.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/20250324125122.81810-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
- Remove unused tools 'pci' build target left over after moving tests to
tools/testing/selftests/pci_endpoint (Jianfeng Liu)
- Fix typos and whitespace errors (Bjorn Helgaas)
* pci/misc:
PCI: Fix typos
tools/Makefile: Remove pci target
# Conflicts:
# drivers/pci/endpoint/functions/pci-epf-test.c
|
|
- Ioremap() msg_res region using res->start (the CPU address), not the ATU
'cpu_addr', which will be replaced with the ATU input address (which may
not be the CPU address) (Frank Li)
- Rename struct dw_pcie_ob_atu_cfg.cpu_addr to 'parent_bus_addr' (Frank Li)
- Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init() to keep
devicetree-related code together (Frank Li)
- Consolidate devicetree handling in dw_pcie_host_get_resources() (Bjorn
Helgaas)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address of a
specified 'reg' property and return the offset from the CPU physical
address (Frank Li)
- Add cross-checking with .cpu_addr_fixup() and debug logging to
dw_pcie_parent_bus_offset() (Frank Li)
- Use devicetree 'reg[config]' via dw_pcie_parent_bus_offset() to derive
CPU -> ATU addr offset for host controller (Frank Li)
- Call epc_create() early in dw_pcie_ep_init() to keep devicetree-related
code together (Bjorn Helgaas)
- Consolidate devicetree handling in dw_pcie_ep_get_resources() (Bjorn
Helgaas)
- Use devicetree 'reg[addr_space]' via dw_pcie_parent_bus_offset() to
derive CPU -> ATU addr offset for endpoint controller (Frank Li)
- Update dw_pcie_find_index() to remove assumption that ATU input address
is non-zero (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of
.cpu_addr_fixup() when programming ATU (Frank Li)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input
address (using parent_bus_offset) from devicetree (Frank Li)
* pci/controller/dwc-cpu-addr-fixup:
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI: dwc: Consolidate devicetree handling in dw_pcie_host_get_resources()
PCI: dwc: Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init()
PCI: dwc: Rename cpu_addr to parent_bus_addr for ATU configuration
PCI: dwc: Use resource start as ioremap() input in dw_pcie_pme_turn_off()
# Conflicts:
# drivers/pci/controller/dwc/pcie-designware.c
# drivers/pci/controller/dwc/pcie-designware.h
|
|
- Free IRQ domain in probe error path to avoid leaking it (Thippeswamy
Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
* pci/controller/xilinx-cpm:
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: xilinx-cpm: Add support for Versal Net CPM5NC Root Port controller
dt-bindings: PCI: xilinx-cpm: Add compatible string for CPM5NC Versal Net host
PCI: xilinx-cpm: Fix IRQ domain leak in error path of probe
|
|
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where spinlock_t
becomes a sleepable lock (Ryo Takakura)
* pci/controller/vmd:
PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type
|
|
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for SDX55
(Dmitry Baryshkov)
- Add DT iommu and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Consolidate DMA vs non-DMA cases in DT (Dmitry Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
* pci/controller/qcom:
PCI: qcom-ep: Enable EP mode support for SAR2130P
dt-bindings: PCI: qcom-ep: Add SAR2130P compatible
dt-bindings: PCI: qcom-ep: Consolidate DMA vs non-DMA cases
dt-bindings: PCI: qcom-ep: Enable DMA for SM8450
dt-bindings: PCI: qcom-ep: Describe optional IOMMU
dt-bindings: PCI: qcom-ep: Describe optional dma-coherent property
PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED
|
|
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program
host bridge memory aperture to this syscon node (Lorenzo Bianconi)
* pci/controller/mediatek:
PCI: mediatek-gen3: Fix inconsistent indentation
PCI: mediatek-gen3: Configure PBUS_CSR registers for EN7581 SoC
dt-bindings: PCI: mediatek-gen3: Add mediatek,pbus-csr phandle array property
PCI: mediatek-gen3: Remove leftover mac_reset assert for Airoha EN7581 SoC
|
|
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
* pci/controller/layerscape:
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
|
|
- Correct the 'link down' interrupt bit for J784S4 (Siddharth Vadapalli)
* pci/controller/j721e:
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
|
|
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Use devm_clk_bulk_get_all() to fetch clocks to simplify the code (Richard
Zhu)
* pci/controller/imx6:
PCI: imx6: Use devm_clk_bulk_get_all() to fetch clocks
PCI: imx6: Identify controller via 'linux,pci-domain', not address
|
|
- Correct comment to say that invalidations from a PF driver are delivered
to the VF endpoint driver, not by the VF driver (Easwar Hariharan)
* pci/controller/hyperv:
PCI: hv: Correct a comment
|
|
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
* pci/controller/histb:
PCI: histb: Fix an error handling path in histb_pcie_probe()
|
|
- Move struct dwc_pcie_vsec_id to include/linux/pcie-dwc.h, where it can be
shared by debugfs, perf, sysfs, etc (Manivannan Sadhasivam)
- Add dw_pcie_find_vsec_capability() to locate Vendor Specific Extended
Capabilities (Shradha Todi)
- Add debugfs-based Silicon Debug, Error Injection, Statistical Counter
support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang)
- Add Rockchip Vendor ID and Vendor Specific ID of RAS DES Capability so
the DWC debugfs features work for Rockchip as well (Niklas Cassel)
* pci/controller/dwc:
PCI: dw-rockchip: Hide broken ATS capability for RK3588 running in EP mode
PCI: dwc: ep: Add dw_pcie_ep_hide_ext_capability()
PCI: dwc: ep: Return -ENOMEM for allocation failures
PCI: dwc: Add Rockchip to the RAS DES allowed vendor list
PCI: Add Rockchip Vendor ID
PCI: dwc: Add debugfs property to provide LTSSM status of the PCIe link
PCI: dwc: Add debugfs based Statistical Counter support for DWC
PCI: dwc: Add debugfs based Error Injection support for DWC
PCI: dwc: Add debugfs based Silicon Debug support for DWC
PCI: dwc: Add helper to find the Vendor Specific Extended Capability (VSEC)
perf/dwc_pcie: Move common DWC struct definitions to 'pcie-dwc.h'
|
