summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-05hwmon: (f75375s) Fix value range for PWM modesGuenter Roeck
Accepted value range for PWM modes was 0..4, even though only 0..3 is subsequently used. Limit permitted value range to 0..3 to avoid unpredictable behavior. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Use standard sysfs attribute namesGuenter Roeck
The driver uses non-standard sysfs attribute names for maximum and target fan speeds, even though standard attibute names for the same values do exist. Replace non-standard attribute names with standard attribute names. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Fix checkpatch errors and warningsGuenter Roeck
Clean up driver to follow current coding style. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Only instantiate external temperature sensor if enabledGuenter Roeck
BMR4xx devices don't have an external temperature sensor, and instantiating it does not provide value anyway if it is disabled. Only instantiate it if it is enabled. Also optimize wait time between I2C chip accesses in the probe function, and replace unnecessary check for support for I2C_FUNC_SMBUS_READ_BYTE_DATA with now required support for I2C_FUNC_SMBUS_READ_WORD_DATA. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4]Guenter Roeck
Add support for Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464, which are based on ZL2005 and ZL2008, to zl6100 driver. Remove BMR450 and BMR451 device IDs from generic PMBus driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Add support for ZL2005Guenter Roeck
Add explicit support for ZL2005. Functionality is almost the same as with other Zilker Labs / Intersil chips, but limit register detection does not work reliably. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/adm1275) Validate device IDGuenter Roeck
Since manufacturer and device ID are known, read and validate it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> [Dan Carpenter <dan.carpenter@oracle.com>: Fixed memory leak] Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43legacy/dma.c
2012-01-05ath6kl: revert USB supportJohn W. Linville
The ath6kl driver is causing build failures when the ath6kl bits are not built as modules. A better fix is forthcoming in a future release, but for now lets revert the problematic code. This reverts the following commits: fde57764ef8751b9aca11b6f6221ac5555bda699 d70385a26ad9a122a5450d066550470107b6bc38 59d954dda4b9b3f3e61d4b87a2b26952b8c4c09d Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-05Merge branches 'hyperv', 'multitouch', 'roccat', 'upstream', ↵Jiri Kosina
'upstream-fixes', 'wacom' and 'wiimote' into for-linus
2012-01-05HID: hid-multitouch: add support 9 new Xiroku devicesMasatoshi Hoshikawa
This patch adds support for the Xiroku Inc. panels (SPX/MPX/CSR/etc.). Signed-off-by: Masatoshi Hoshikawa <hoshikawa@xiroku.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-05drm: make DRM_UNLOCKED ioctls with their own mutexIlija Hadzic
drm_getclient, drm_getstats and drm_getmap (with a few minor adjustments) do not need global mutex, so fix that and make the said ioctls DRM_UNLOCKED. Details: drm_getclient: the only thing that should be protected here is dev->filelist and that is already protected everywhere with dev->struct_mutex. drm_getstats: there is no need for any mutex here because the loop runs through quasi-static (set at load time only) data, and the actual count access is done with atomic_read() drm_getmap already uses dev->struct_mutex to protect dev->maplist, which also used to protect the same structure everywhere else except at three places: * drm_getsarea, which doesn't grab *any* mutex before touching dev->maplist (so no drm_global_mutex doesn't help here either; different issue for a different patch). However, drivers seem to call it only at initialization time so it probably doesn't matter * drm_master_destroy, which is called from drm_master_put, which in turn is protected with dev->struct_mutex everywhere else in drm module, so we are good here too. * drm_getsareactx, which releases the dev->struct_mutex too early, but this patch includes the fix for that. v2: * incorporate comments received from Daniel Vetter * include the (long) explanation above to make it clear what we are doing (and why), also at Daniel Vetter's request * tighten up mutex grab/release locations to only encompass real critical sections, rather than some random code around them Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm: no need to hold global mutex for static dataIlija Hadzic
drm_getcap and drm_version ioctls only reads static data, there is no need to protect them with drm_global_mutex, so make them DRM_UNLOCKED Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm/radeon/benchmark: common modes sweep ignores 640x480@32Chen Jie
Sweep common_modes array should start with index 0. Signed-off-by: Chen Jie <chenj@lemote.com> Reviewed-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05Merge branch 'restart' into for-linusRussell King
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05Merge branch 'devel-stable' into for-linusRussell King
Conflicts: arch/arm/kernel/setup.c arch/arm/mach-shmobile/board-kota2.c
2012-01-05Merge branches 'fixes' and 'misc' into for-linusRussell King
2012-01-05ARM: 7267/1: Remove BUILD_BUG_ON from asm/bug.hSimon Glass
BUILD_BUG_ON is defined in linux/kernel.h but that is not included by the asm/bug.h header which uses it. This causes a build error: ...include/linux/mtd/map.h: In function 'inline_map_read': ...include/linux/mtd/map.h:408:3: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration] The check is not essential and is not present for other architectures, so just remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7269/1: mach-sa1100: fix sched_clock breakageLinus Walleij
Fixed up a simple typo in the runtime sched_clock conversion so we compile again. Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7198/1: arm/imx6: add restart support for imx6qShawn Guo
The restart support was missed from the initial imx6q submission. The mxc_restart() does not work for imx6q. Instead, this patch adds the restart for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: remove the now empty arch_reset()Russell King
Remove the now empty arch_reset() from all the mach/system.h includes, and remove its callsite. Remove arm_machine_restart() as this function no longer does anything useful. For samsung platforms, remove the include of mach/system-reset.h and plat/system-reset.h from their respective mach/system.h headers as these just define their arch_reset functions. As a result, the s3c2410 and plat-samsung system-reset.h files are no longer referenced, so remove these files entirely. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: remove comments about adding code to arch_reset()Russell King
arch_reset() is deprecated; systems should hook into system restart via the 'restart' method in the platforms machine description record. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: lpc32xx & u300: remove unnecessary printkRussell King
Remove the: KERN_CRIT "RESET: Rebooting system\n" (lpc32xx) KERN_CRIT "RESET: shutting down/rebooting system\n" (u300) printk from the restart handler; we already print such a message from kernel_restart() in kernel/sys.c: KERN_EMERG "Restarting system.\n" so this is unnecessary. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: plat-samsung: remove plat/reset.h and s5p_reset_hookRussell King
Now that s5p_reset_hook is unused, we can get rid of plat/reset.h and the s5p_reset_hook code in plat/system-reset.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: w90x900: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: Versatile Express: use new restart hookRussell King
Hook the Versatile Express platform restart code into the new restart hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: versatile: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: u300: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: tegra: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: spear: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: shark: use new restart hookRussell King
Hook the Shark restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: sa1100: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7252/1: restart: S5PV210: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). [kgene.kim@samsung.com: according to local header, updated] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7251/1: restart: S5PC100: use new restart hookKukjin Kim
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7250/1: restart: S5P64X0: use new restart hookKukjin Kim
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7266/1: restart: S3C64XX: use new restart hookKukjin Kim
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7265/1: restart: S3C24XX: use new restart hookKukjin Kim
Hook these platforms restart code into the new restart hook rather than using arch_reset(). And adds local header file, common.h in arch/arm/mach-s3c2410/ and arch/arm/mach-s3c2440/ directories. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7254/1: restart: S3C24XX: move SWRST based S3C platforms toHeiko Stuebner
S3C2412/S3C2416/S3C2443 use a special register to signal the reset to the processor and used therefore the s3c24xx_reset_hook mechanism in the s3c24xx-specific arch reset. This patch introduces restart functions for these architectures, moves the board files to them and removes the s3c24xx_reset_hook infrastructure, as all users are gone. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: riscpc: use new restart hookRussell King
Hook the RiscPC restart code into the new restart hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: realview: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: pxa: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: prima2: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Reviewed-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: pnx4008: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: orion5x: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). In addition, convert calls to arm_machine_restart() to orion5x_restart() to ensure that they continue to work as intended. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: omap: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: nomadik: use new restart hookRussell King
Hook the Nomadik NHK platform restart code into the new restart hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: netx: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: mxs: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: mxc: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: mv78xx0: use new restart hookRussell King
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Nicolas pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 16:45:33 +0000