summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-18macsec: Fix invalid error code setYueHaibing
'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded case, it will be invalid before return. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20221118011249.48112-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18bonding: fix ICMPv6 header handling when receiving IPv6 messagesHangbin Liu
Currently, we get icmp6hdr via function icmp6_hdr(), which needs the skb transport header to be set first. But there is no rule to ask driver set transport header before netif_receive_skb() and bond_handle_frame(). So we will not able to get correct icmp6hdr on some drivers. Fix this by using skb_header_pointer to get the IPv6 and ICMPV6 headers. Reported-by: Liang Li <liali@redhat.com> Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20221118034353.1736727-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18Merge branch 'nfp-fixes-for-v6-1'Jakub Kicinski
Simon Horman says: ==================== nfp: fixes for v6.1 - Ensure that information displayed by "devlink port show" reflects the number of lanes available to be split. - Avoid NULL dereference in ethtool test code. ==================== Link: https://lore.kernel.org/r/20221117153744.688595-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18nfp: add port from netdev validation for EEPROM accessJaco Coetzee
Setting of the port flag `NFP_PORT_CHANGED`, introduced to ensure the correct reading of EEPROM data, causes a fatal kernel NULL pointer dereference in cases where the target netdev type cannot be determined. Add validation of port struct pointer before attempting to set the `NFP_PORT_CHANGED` flag. Return that operation is not supported if the netdev type cannot be determined. Fixes: 4ae97cae07e1 ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`") Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18nfp: fill splittable of devlink_port_attrs correctlyDiana Wang
The error is reflected in that it shows wrong splittable status of port when executing "devlink port show". The reason which leads the error is that the assigned operation of splittable is just a simple negation operation of split and it does not consider port lanes quantity. A splittable port should have several lanes that can be split(lanes quantity > 1). If without the judgement, it will show wrong message for some firmware, such as 2x25G, 2x10G. Fixes: a0f49b548652 ("devlink: Add a new devlink port split ability attribute and pass to netlink") Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: pch_gbe: fix pci device refcount leak while module exitingYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called, so in error path in probe() and remove() function, pci_dev_put() should be called to avoid refcount leak. Compile tested only. Fixes: 1a0bdadb4e36 ("net/pch_gbe: supports eg20t ptp clock") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117135148.301014-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18octeontx2-af: debugsfs: fix pci device refcount leakYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from rvu_dbg_rvu_pf_cgx_map_display() or cgx_print_dmac_flt(), pci_dev_put() is called to avoid refcount leak. Fixes: dbc52debf95f ("octeontx2-af: Debugfs support for DMAC filters") Fixes: e2fb37303865 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117124658.162409-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net/qla3xxx: fix potential memleak in ql3xxx_send()Zhang Changzhong
The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error handling case, add dev_kfree_skb_any() to fix it. Fixes: bd36b0ac5d06 ("qla3xxx: Add support for Qlogic 4032 chip.") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1668675039-21138-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: mvpp2: fix possible invalid pointer dereferenceHui Tang
It will cause invalid pointer dereference to priv->cm3_base behind, if PTR_ERR(priv->cm3_base) in mvpp2_get_sram(). Fixes: e54ad1e01c00 ("net: mvpp2: add CM3 SRAM memory map") Signed-off-by: Hui Tang <tanghui20@huawei.com> Link: https://lore.kernel.org/r/20221117084032.101144-1-tanghui20@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net/mlx4: Check retval of mlx4_bitmap_initPeter Kosyh
If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference the NULL pointer (bitmap->table). Make sure, that mlx4_bitmap_alloc_range called in no error case. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d57febe1a478 ("net/mlx4: Add A0 hybrid steering") Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Peter Kosyh <pkosyh@yandex.ru> Link: https://lore.kernel.org/r/20221117152806.278072-1-pkosyh@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: ethernet: mtk_eth_soc: fix error handling in mtk_open()Liu Jian
If mtk_start_dma() fails, invoke phylink_disconnect_phy() to perform cleanup. phylink_disconnect_phy() contains the put_device action. If phylink_disconnect_phy is not performed, the Kref of netdev will leak. Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221117111356.161547-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18iavf: Fix race condition between iavf_shutdown and iavf_removeSlawomir Laba
Fix a deadlock introduced by commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") due to race condition between iavf_shutdown and iavf_remove, where iavf_remove stucks forever in while loop since iavf_shutdown already set __IAVF_REMOVE adapter state. Fix this by checking if the __IAVF_IN_REMOVE_TASK has already been set and return if so. Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: remove INITIAL_MAC_SET to allow gARP to work properlyStefan Assmann
IAVF_FLAG_INITIAL_MAC_SET prevents waiting on iavf_is_mac_set_handled() the first time the MAC is set. This breaks gratuitous ARP because the MAC address has not been updated yet when the gARP packet is sent out. Current behaviour: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: ee:04:19:14:ec:ea $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:23:41.676611 ee:04:19:14:ec:ea > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 With IAVF_FLAG_INITIAL_MAC_SET removed: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: 3e:8a:16:a2:37:6d $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:28:01.836608 00:11:22:33:44:55 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: Do not restart Tx queues after reset task failureIvan Vecera
After commit aa626da947e9 ("iavf: Detach device during reset task") the device is detached during reset task and re-attached at its end. The problem occurs when reset task fails because Tx queues are restarted during device re-attach and this leads later to a crash. To resolve this issue properly close the net device in cause of failure in reset task to avoid restarting of tx queues at the end. Also replace the hacky manipulation with IFF_UP flag by device close that clears properly both IFF_UP and __LINK_STATE_START flags. In these case iavf_close() does not do anything because the adapter state is already __IAVF_DOWN. Reproducer: 1) Run some Tx traffic (e.g. iperf3) over iavf interface 2) Set VF trusted / untrusted in loop [root@host ~]# cat repro.sh PF=enp65s0f0 IF=${PF}v0 ip link set up $IF ip addr add 192.168.0.2/24 dev $IF sleep 1 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do ip link set $PF vf 0 trust on ip link set $PF vf 0 trust off done [root@host ~]# ./repro.sh Result: [ 2006.650969] iavf 0000:41:01.0: Failed to init adminq: -53 [ 2006.675662] ice 0000:41:00.0: VF 0 is now trusted [ 2006.689997] iavf 0000:41:01.0: Reset task did not complete, VF disabled [ 2006.696611] iavf 0000:41:01.0: failed to allocate resources during reinit [ 2006.703209] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.737011] ice 0000:41:00.0: VF 0 is now trusted [ 2006.764536] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.768919] BUG: kernel NULL pointer dereference, address: 0000000000000b4a [ 2006.776358] #PF: supervisor read access in kernel mode [ 2006.781488] #PF: error_code(0x0000) - not-present page [ 2006.786620] PGD 0 P4D 0 [ 2006.789152] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 2006.792903] ice 0000:41:00.0: VF 0 is now trusted [ 2006.793501] CPU: 4 PID: 0 Comm: swapper/4 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 2006.805668] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 2006.815915] RIP: 0010:iavf_xmit_frame_ring+0x96/0xf70 [iavf] [ 2006.821028] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.821572] Code: 48 83 c1 04 48 c1 e1 04 48 01 f9 48 83 c0 10 6b 50 f8 55 c1 ea 14 45 8d 64 14 01 48 39 c8 75 eb 41 83 fc 07 0f 8f e9 08 00 00 <0f> b7 45 4a 0f b7 55 48 41 8d 74 24 05 31 c9 66 39 d0 0f 86 da 00 [ 2006.845181] RSP: 0018:ffffb253004bc9e8 EFLAGS: 00010293 [ 2006.850397] RAX: ffff9d154de45b00 RBX: ffff9d15497d52e8 RCX: ffff9d154de45b00 [ 2006.856327] ice 0000:41:00.0: VF 0 is now trusted [ 2006.857523] RDX: 0000000000000000 RSI: 00000000000005a8 RDI: ffff9d154de45ac0 [ 2006.857525] RBP: 0000000000000b00 R08: ffff9d159cb010ac R09: 0000000000000001 [ 2006.857526] R10: ffff9d154de45940 R11: 0000000000000000 R12: 0000000000000002 [ 2006.883600] R13: ffff9d1770838dc0 R14: 0000000000000000 R15: ffffffffc07b8380 [ 2006.885840] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.890725] FS: 0000000000000000(0000) GS:ffff9d248e900000(0000) knlGS:0000000000000000 [ 2006.890727] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2006.909419] CR2: 0000000000000b4a CR3: 0000000c39c10002 CR4: 0000000000770ee0 [ 2006.916543] PKRU: 55555554 [ 2006.918254] ice 0000:41:00.0: VF 0 is now trusted [ 2006.919248] Call Trace: [ 2006.919250] <IRQ> [ 2006.919252] dev_hard_start_xmit+0x9e/0x1f0 [ 2006.932587] sch_direct_xmit+0xa0/0x370 [ 2006.936424] __dev_queue_xmit+0x7af/0xd00 [ 2006.940429] ip_finish_output2+0x26c/0x540 [ 2006.944519] ip_output+0x71/0x110 [ 2006.947831] ? __ip_finish_output+0x2b0/0x2b0 [ 2006.952180] __ip_queue_xmit+0x16d/0x400 [ 2006.952721] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.956098] __tcp_transmit_skb+0xa96/0xbf0 [ 2006.965148] __tcp_retransmit_skb+0x174/0x860 [ 2006.969499] ? cubictcp_cwnd_event+0x40/0x40 [ 2006.973769] tcp_retransmit_skb+0x14/0xb0 ... Fixes: aa626da947e9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: Fix a crash during reset taskIvan Vecera
Recent commit aa626da947e9 ("iavf: Detach device during reset task") removed netif_tx_stop_all_queues() with an assumption that Tx queues are already stopped by netif_device_detach() in the beginning of reset task. This assumption is incorrect because during reset task a potential link event can start Tx queues again. Revert this change to fix this issue. Reproducer: 1. Run some Tx traffic (e.g. iperf3) over iavf interface 2. Switch MTU of this interface in a loop [root@host ~]# cat repro.sh IF=enp2s0f0v0 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do for i in 1280 1500 2000 900 ; do ip link set $IF mtu $i sleep 2 done done [root@host ~]# ./repro.sh Result: [ 306.199917] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 308.205944] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 310.103223] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 310.110179] #PF: supervisor write access in kernel mode [ 310.115396] #PF: error_code(0x0002) - not-present page [ 310.120526] PGD 0 P4D 0 [ 310.123057] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 310.127408] CPU: 24 PID: 183 Comm: kworker/u64:9 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 310.135485] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 310.145728] Workqueue: iavf iavf_reset_task [iavf] [ 310.150520] RIP: 0010:iavf_xmit_frame_ring+0xd1/0xf70 [iavf] [ 310.156180] Code: d0 0f 86 da 00 00 00 83 e8 01 0f b7 fa 29 f8 01 c8 39 c6 0f 8f a0 08 00 00 48 8b 45 20 48 8d 14 92 bf 01 00 00 00 4c 8d 3c d0 <49> 89 5f 08 8b 43 70 66 41 89 7f 14 41 89 47 10 f6 83 82 00 00 00 [ 310.174918] RSP: 0018:ffffbb5f0082caa0 EFLAGS: 00010293 [ 310.180137] RAX: 0000000000000000 RBX: ffff92345471a6e8 RCX: 0000000000000200 [ 310.187259] RDX: 0000000000000000 RSI: 000000000000000d RDI: 0000000000000001 [ 310.194385] RBP: ffff92341d249000 R08: ffff92434987fcac R09: 0000000000000001 [ 310.201509] R10: 0000000011f683b9 R11: 0000000011f50641 R12: 0000000000000008 [ 310.208631] R13: ffff923447500000 R14: 0000000000000000 R15: 0000000000000000 [ 310.215756] FS: 0000000000000000(0000) GS:ffff92434ee00000(0000) knlGS:0000000000000000 [ 310.223835] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 310.229572] CR2: 0000000000000008 CR3: 0000000fbc210004 CR4: 0000000000770ee0 [ 310.236696] PKRU: 55555554 [ 310.239399] Call Trace: [ 310.241844] <IRQ> [ 310.243855] ? dst_alloc+0x5b/0xb0 [ 310.247260] dev_hard_start_xmit+0x9e/0x1f0 [ 310.251439] sch_direct_xmit+0xa0/0x370 [ 310.255276] __qdisc_run+0x13e/0x580 [ 310.258848] __dev_queue_xmit+0x431/0xd00 [ 310.262851] ? selinux_ip_postroute+0x147/0x3f0 [ 310.267377] ip_finish_output2+0x26c/0x540 Fixes: aa626da947e9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18netfilter: nf_tables: do not set up extensions for end intervalPablo Neira Ayuso
Elements with an end interval flag set on do not store extensions. The global set definition is currently setting on the timeout and stateful expression for end interval elements. This leads to skipping end interval elements from the set->ops->walk() path as the expired check bogusly reports true. Moreover, do not set up stateful expressions for elements with end interval flag set on since this is never used. Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-18netfilter: conntrack: Fix data-races around ct markDaniel Xu
nf_conn:mark can be read from and written to in parallel. Use READ_ONCE()/WRITE_ONCE() for reads and writes to prevent unwanted compiler optimizations. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-18net: pch_gbe: fix potential memleak in pch_gbe_tx_queue()Wang Hai
In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue() needs to free skb before returning. But pch_gbe_tx_queue() returns without freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any() to fix it. Fixes: 77555ee72282 ("net: Add Gigabit Ethernet driver of Topcliff PCH") Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18nfc/nci: fix race with opening and closingLin Ma
Previously we leverage NCI_UNREG and the lock inside nci_close_device to prevent the race condition between opening a device and closing a device. However, it still has problem because a failed opening command will erase the NCI_UNREG flag and allow another opening command to bypass the status checking. This fix corrects that by making sure the NCI_UNREG is held. Reported-by: syzbot+43475bf3cfbd6e41f5b7@syzkaller.appspotmail.com Fixes: 48b71a9e66c2 ("NFC: add NCI_UNREG flag to eliminate the race") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: dsa: sja1105: disallow C45 transactions on the BASE-TX MDIO busVladimir Oltean
You'd think people know that the internal 100BASE-TX PHY on the SJA1110 responds only to clause 22 MDIO transactions, but they don't :) When a clause 45 transaction is attempted, sja1105_base_tx_mdio_read() and sja1105_base_tx_mdio_write() don't expect "reg" to contain bit 30 set (MII_ADDR_C45) and pack this value into the SPI transaction buffer. But the field in the SPI buffer has a width smaller than 30 bits, so we see this confusing message from the packing() API rather than a proper rejection of C45 transactions: Call trace: dump_stack+0x1c/0x38 sja1105_pack+0xbc/0xc0 [sja1105] sja1105_xfer+0x114/0x2b0 [sja1105] sja1105_xfer_u32+0x44/0xf4 [sja1105] sja1105_base_tx_mdio_read+0x44/0x7c [sja1105] mdiobus_read+0x44/0x80 get_phy_c45_ids+0x70/0x234 get_phy_device+0x68/0x15c fwnode_mdiobus_register_phy+0x74/0x240 of_mdiobus_register+0x13c/0x380 sja1105_mdiobus_register+0x368/0x490 [sja1105] sja1105_setup+0x94/0x119c [sja1105] Cannot store 401d2405 inside bits 24-4 (would truncate) Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18rxrpc: Fix race between conn bundle lookup and bundle removal [ZDI-CAN-15975]David Howells
After rxrpc_unbundle_conn() has removed a connection from a bundle, it checks to see if there are any conns with available channels and, if not, removes and attempts to destroy the bundle. Whilst it does check after grabbing client_bundles_lock that there are no connections attached, this races with rxrpc_look_up_bundle() retrieving the bundle, but not attaching a connection for the connection to be attached later. There is therefore a window in which the bundle can get destroyed before we manage to attach a new connection to it. Fix this by adding an "active" counter to struct rxrpc_bundle: (1) rxrpc_connect_call() obtains an active count by prepping/looking up a bundle and ditches it before returning. (2) If, during rxrpc_connect_call(), a connection is added to the bundle, this obtains an active count, which is held until the connection is discarded. (3) rxrpc_deactivate_bundle() is created to drop an active count on a bundle and destroy it when the active count reaches 0. The active count is checked inside client_bundles_lock() to prevent a race with rxrpc_look_up_bundle(). (4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle(). Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-15975 Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: zdi-disclosures@trendmicro.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18selftests/net: fix missing xdp_dummyWang Yufen
After commit afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o extension"), we should use xdp_dummy.bpf.o instade of xdp_dummy.o. In addition, use the BPF_FILE variable to save the BPF object file name, which can be better identified and modified. Fixes: afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o extension") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Cc: Daniel Müller <deso@posteo.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18ipvlan: hold lower dev to avoid possible use-after-freeMahesh Bandewar
Recently syzkaller discovered the issue of disappearing lower device (NETDEV_UNREGISTER) while the virtual device (like macvlan) is still having it as a lower device. So it's just a matter of time similar discovery will be made for IPvlan device setup. So fixing it preemptively. Also while at it, add a refcount tracker. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: neigh: decrement the family specific qlenThomas Zeitlhofer
Commit 0ff4eb3d5ebb ("neighbour: make proxy_queue.qlen limit per-device") introduced the length counter qlen in struct neigh_parms. There are separate neigh_parms instances for IPv4/ARP and IPv6/ND, and while the family specific qlen is incremented in pneigh_enqueue(), the mentioned commit decrements always the IPv4/ARP specific qlen, regardless of the currently processed family, in pneigh_queue_purge() and neigh_proxy_process(). As a result, with IPv6/ND, the family specific qlen is only incremented (and never decremented) until it exceeds PROXY_QLEN, and then, according to the check in pneigh_enqueue(), neighbor solicitations are not answered anymore. As an example, this is noted when using the subnet-router anycast address to access a Linux router. After a certain amount of time (in the observed case, qlen exceeded PROXY_QLEN after two days), the Linux router stops answering neighbor solicitations for its subnet-router anycast address and effectively becomes unreachable. Another result with IPv6/ND is that the IPv4/ARP specific qlen is decremented more often than incremented. This leads to negative qlen values, as a signed integer has been used for the length counter qlen, and potentially to an integer overflow. Fix this by introducing the helper function neigh_parms_qlen_dec(), which decrements the family specific qlen. Thereby, make use of the existing helper function neigh_get_dev_parms_rcu(), whose definition therefore needs to be placed earlier in neighbour.c. Take the family member from struct neigh_table to determine the currently processed family and appropriately call neigh_parms_qlen_dec() from pneigh_queue_purge() and neigh_proxy_process(). Additionally, use an unsigned integer for the length counter qlen. Fixes: 0ff4eb3d5ebb ("neighbour: make proxy_queue.qlen limit per-device") Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: liquidio: simplify if expressionLeon Romanovsky
Fix the warning reported by kbuild: cocci warnings: (new ones prefixed by >>) >> drivers/net/ethernet/cavium/liquidio/lio_main.c:1797:54-56: WARNING !A || A && B is equivalent to !A || B drivers/net/ethernet/cavium/liquidio/lio_main.c:1827:54-56: WARNING !A || A && B is equivalent to !A || B Fixes: 8979f428a4af ("net: liquidio: release resources when liquidio driver open failed") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-17Merge branch 'mptcp-selftests-fix-timeouts-and-test-isolation'Jakub Kicinski
Mat Martineau says: ==================== mptcp: selftests: Fix timeouts and test isolation Patches 1 and 3 adjust test timeouts to reduce false negatives on slow machines. Patch 2 improves test isolation by running the mptcp_sockopt test in its own net namespace. ==================== Link: https://lore.kernel.org/r/20221115221046.20370-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17selftests: mptcp: fix mibit vs mbit mix upMatthieu Baerts
The estimated time was supposing the rate was expressed in mibit (bit * 1024^2) but it is in mbit (bit * 1000^2). This makes the threshold higher but in a more realistic way to avoid false positives reported by CI instances. Before this patch, the thresholds were at 7561/4005ms and now they are at 7906/4178ms. While at it, also fix a typo in the linked comment, spotted by Mat. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/310 Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17selftests: mptcp: run mptcp_sockopt from a new netnsMatthieu Baerts
Not running it from a new netns causes issues if some MPTCP settings are modified, e.g. if MPTCP is disabled from the sysctl knob, if multiple addresses are available and added to the MPTCP path-manager, etc. In these cases, the created connection will not behave as expected, e.g. unable to create an MPTCP socket, more than one subflow is seen, etc. A new "sandbox" net namespace is now created and used to run mptcp_sockopt from this controlled environment. Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17selftests: mptcp: gives slow test-case more timePaolo Abeni
On slow or busy VM, some test-cases still fail because the data transfer completes before the endpoint manipulation actually took effect. Address the issue by artificially increasing the runtime for the relevant test-cases. Fixes: ef360019db40 ("selftests: mptcp: signal addresses testcases") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/309 Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17Merge tag 'net-6.1-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Current release - regressions: - tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init() Previous releases - regressions: - bridge: fix memory leaks when changing VLAN protocol - dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims - dsa: don't leak tagger-owned storage on switch driver unbind - eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6 is removed - eth: stmmac: ensure tx function is not running in stmmac_xdp_release() - eth: hns3: fix return value check bug of rx copybreak Previous releases - always broken: - kcm: close race conditions on sk_receive_queue - bpf: fix alignment problem in bpf_prog_test_run_skb() - bpf: fix writing offset in case of fault in strncpy_from_kernel_nofault - eth: macvlan: use built-in RCU list checking - eth: marvell: add sleep time after enabling the loopback bit - eth: octeon_ep: fix potential memory leak in octep_device_setup() Misc: - tcp: configurable source port perturb table size - bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)" * tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) net: use struct_group to copy ip/ipv6 header addresses net: usb: smsc95xx: fix external PHY reset net: usb: qmi_wwan: add Telit 0x103a composition netdevsim: Fix memory leak of nsim_dev->fa_cookie tcp: configurable source port perturb table size l2tp: Serialize access to sk_user_data with sk_callback_lock net: thunderbolt: Fix error handling in tbnet_init() net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start() net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init() net: dsa: don't leak tagger-owned storage on switch driver unbind net/x25: Fix skb leak in x25_lapb_receive_frame() net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open() bridge: switchdev: Fix memory leaks when changing VLAN protocol net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process net: hns3: fix return value check bug of rx copybreak net: hns3: fix incorrect hw rss hash type of rx packet net: phy: marvell: add sleep time after enabling the loopback bit net: ena: Fix error handling in ena_init() kcm: close race conditions on sk_receive_queue net: ionic: Fix error handling in ionic_init_module() ...
2022-11-17net: use struct_group to copy ip/ipv6 header addressesHangbin Liu
kernel test robot reported warnings when build bonding module with make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/: from ../drivers/net/bonding/bond_main.c:35: In function ‘fortify_memcpy_chk’, inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2, inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3: ../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 413 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘fortify_memcpy_chk’, inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2, inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3: ../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 413 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is because we try to copy the whole ip/ip6 address to the flow_key, while we only point the to ip/ip6 saddr. Note that since these are UAPI headers, __struct_group() is used to avoid the compiler warnings. Reported-by: kernel test robot <lkp@intel.com> Fixes: c3f8324188fa ("net: Add full IPv6 addresses to flow_keys") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-17net: usb: smsc95xx: fix external PHY resetAlexandru Tachici
An external PHY needs settling time after power up or reset. In the bind() function an mdio bus is registered. If at this point the external PHY is still initialising, no valid PHY ID will be read and on phy_find_first() the bind() function will fail. If an external PHY is present, wait the maximum time specified in 802.3 45.2.7.1.1. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-17net: usb: qmi_wwan: add Telit 0x103a compositionEnrico Sau
Add the following Telit LE910C4-WWX composition: 0x103a: rmnet Signed-off-by: Enrico Sau <enrico.sau@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-16netdevsim: Fix memory leak of nsim_dev->fa_cookieWang Yufen
kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Cc: Jiri Pirko <jiri@mellanox.com> Link: https://lore.kernel.org/r/1668504625-14698-1-git-send-email-wangyufen@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-16Merge tag 'for-linus-6.1-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two trivial cleanups, and three simple fixes" * tag 'for-linus-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/platform-pci: use define instead of literal number xen/platform-pci: add missing free_irq() in error path xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too xen/pcpu: fix possible memory leak in register_pcpu() x86/xen: Use kstrtobool() instead of strtobool()
2022-11-16Merge tag 'pinctrl-v6.1-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Aere is a hopefully final round of pin control fixes. Nothing special, driver fixes and we caught a potential NULL pointer exception. - Fix a potential NULL dereference in the core! - Fix all pin mux routes in the Rockchop PX30 driver - Fix the UFS pins in the Qualcomm SC8280XP driver - Fix bias disabling in the Mediatek driver - Fix debounce time settings in the Mediatek driver" * tag 'pinctrl-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: mediatek: Export debounce time tables pinctrl: mediatek: Fix EINT pins input debounce time configuration pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE pinctrl: qcom: sc8280xp: Rectify UFS reset pins pinctrl: rockchip: list all pins in a possible mux route for PX30
2022-11-16Merge tag 'platform-drivers-x86-v6.1-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Surface Pro 9 and Surface Laptop 5 kbd, battery, etc support (this is just a few hw-id additions) - A couple of other hw-id / DMI-quirk additions - A few small bug fixes + 1 build fix * tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops platform/x86: hp-wmi: Ignore Smart Experience App event platform/surface: aggregator_registry: Add support for Surface Laptop 5 platform/surface: aggregator_registry: Add support for Surface Pro 9 platform/surface: aggregator: Do not check for repeated unsequenced packets platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017) platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr() platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized platform/x86: thinkpad_acpi: Enable s2idle quirk for 21A1 machine type platform/x86/amd: pmc: Add new ACPI ID AMDI0009 platform/x86/amd: pmc: Remove more CONFIG_DEBUG_FS checks
2022-11-16tcp: configurable source port perturb table sizeGleb Mazovetskiy
On embedded systems with little memory and no relevant security concerns, it is beneficial to reduce the size of the table. Reducing the size from 2^16 to 2^8 saves 255 KiB of kernel RAM. Makes the table size configurable as an expert option. The size was previously increased from 2^8 to 2^16 in commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16"). Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16l2tp: Serialize access to sk_user_data with sk_callback_lockJakub Sitnicki
sk->sk_user_data has multiple users, which are not compatible with each other. Writers must synchronize by grabbing the sk->sk_callback_lock. l2tp currently fails to grab the lock when modifying the underlying tunnel socket fields. Fix it by adding appropriate locking. We err on the side of safety and grab the sk_callback_lock also inside the sk_destruct callback overridden by l2tp, even though there should be no refs allowing access to the sock at the time when sk_destruct gets called. v4: - serialize write to sk_user_data in l2tp sk_destruct v3: - switch from sock lock to sk_callback_lock - document write-protection for sk_user_data v2: - update Fixes to point to origin of the bug - use real names in Reported/Tested-by tags Cc: Tom Parkin <tparkin@katalix.com> Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core") Reported-by: Haowei Yan <g1042620637@gmail.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16net: thunderbolt: Fix error handling in tbnet_init()Yuan Can
A problem about insmod thunderbolt-net failed is triggered with following log given while lsmod does not show thunderbolt_net: insmod: ERROR: could not insert module thunderbolt-net.ko: File exists The reason is that tbnet_init() returns tb_register_service_driver() directly without checking its return value, if tb_register_service_driver() failed, it returns without removing property directory, resulting the property directory can never be created later. tbnet_init() tb_register_property_dir() # register property directory tb_register_service_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without remove property directory Fix by remove property directory when tb_register_service_driver() returns error. Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16Merge branch 'microchip-fixes'David S. Miller
Shang XiaoJing says: ==================== net: microchip: Fix potential null-ptr-deref due to create_singlethread_workqueue() There are some functions call create_singlethread_workqueue() without checking ret value, and the NULL workqueue_struct pointer may causes null-ptr-deref. Will be fixed by this patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() ↵Shang XiaoJing
and sparx5_start() sparx_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: sparx_stats_init() create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL. So as sparx5_start(). Fixes: af4b11022e2d ("net: sparx5: add ethtool configuration and statistics support") Fixes: b37a1bae742f ("net: sparx5: add mactable support") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init()Shang XiaoJing
lan966x_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: lan966x_stats_init() create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL. Fixes: 12c2d0a5b8e2 ("net: lan966x: add ethtool configuration and statistics") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tablesHans de Goede
Add module parameters to allow setting the hw_rfkill_switch and set_fn_lock_led feature flags for testing these on laptops which are not on the DMI-id based allow lists for these 2 flags. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221115193400.376159-1-hdegoede@redhat.com
2022-11-16platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some ↵Arnav Rawat
Yoga laptops Commit 3ae86d2d4704 ("platform/x86: ideapad-laptop: Fix Legion 5 Fn lock LED") uses the WMI event-id for the fn-lock event on some Legion 5 laptops to manually toggle the fn-lock LED because the EC does not do it itself. However, the same WMI ID is also sent on some Yoga laptops. Here, setting the fn-lock state is not valid behavior, and causes the EC to spam interrupts until the laptop is rebooted. Add a set_fn_lock_led_list[] DMI-id list and only enable the workaround to manually set the LED on models on this list. Link: https://bugzilla.kernel.org/show_bug.cgi?id=212671 Cc: Meng Dong <whenov@gmail.com> Signed-off-by: Arnav Rawat <arnavr3@illinois.edu> Link: https://lore.kernel.org/r/12093851.O9o76ZdvQC@fedora [hdegoede@redhat.com: Check DMI-id list only once and store the result] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-16platform/x86: hp-wmi: Ignore Smart Experience App eventKai-Heng Feng
Sometimes hp-wmi driver complains on system resume: [ 483.116451] hp_wmi: Unknown event_id - 33 - 0x0 According to HP it's a feature called "HP Smart Experience App" and it's safe to be ignored. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20221114073842.205392-1-kai.heng.feng@canonical.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-16platform/surface: aggregator_registry: Add support for Surface Laptop 5Maximilian Luz
Add device nodes to enable support for battery and charger status, the ACPI platform profile, as well as internal HID devices (including touchpad and keyboard) on the Surface Laptop 5. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221115231440.1338142-1-luzmaximilian@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-15net: dsa: don't leak tagger-owned storage on switch driver unbindVladimir Oltean
In the initial commit dc452a471dba ("net: dsa: introduce tagger-owned storage for private and shared data"), we had a call to tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at tree teardown time. There were problems with connecting to a switch tree as a whole, so this got reworked to connecting to individual switches within the tree. In this process, tag_ops->disconnect(ds) was made to be called only from switch.c (cross-chip notifiers emitted as a result of dynamic tag proto changes), but the normal driver teardown code path wasn't replaced with anything. Solve this problem by adding a function that does the opposite of dsa_switch_setup_tag_protocol(), which is called from the equivalent spot in dsa_switch_teardown(). The positioning here also ensures that we won't have any use-after-free in tagging protocol (*rcv) ops, since the teardown sequence is as follows: dsa_tree_teardown -> dsa_tree_teardown_master -> dsa_master_teardown -> unsets master->dsa_ptr, making no further packets match the ETH_P_XDSA packet type handler -> dsa_tree_teardown_ports -> dsa_port_teardown -> dsa_slave_destroy -> unregisters DSA net devices, there is even a synchronize_net() in unregister_netdevice_many() -> dsa_tree_teardown_switches -> dsa_switch_teardown -> dsa_switch_teardown_tag_protocol -> finally frees the tagger-owned storage Fixes: 7f2973149c22 ("net: dsa: make tagging protocols connect to individual switches from a tree") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221114143551.1906361-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net/x25: Fix skb leak in x25_lapb_receive_frame()Wei Yongjun
x25_lapb_receive_frame() using skb_copy() to get a private copy of skb, the new skb should be freed in the undersized/fragmented skb error handling path. Otherwise there is a memory leak. Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20221114110519.514538-1-weiyongjun@huaweicloud.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ↵Liu Jian
ag71xx_open() If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up. And if phylink_of_phy_connect() fails, nothing needs to be done. Compile tested only. Fixes: 892e09153fa3 ("net: ag71xx: port to phylink") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221114095549.40342-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 05:55:25 +0000