| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfx fixes from David Howells:
"Two fixes, affecting the functions that iterates over the pagecache
unmarking or unlocking pages after an op is complete:
- xas_for_each() loops must call xas_retry() first thing and
immediately do a "continue" in the case that the extracted value is
a special value that indicates that the walk raced with a
modification. Fix the unlock and unmark loops to do this.
- The maths in the unlock loop is dodgy as it could, theoretically,
at some point in the future end up with a starting file pointer
that is in the middle of a folio. This will cause a subtraction to
go negative - but the number is unsigned. Fix the maths to use
absolute file positions instead of relative page indices"
* tag 'netfs-fixes-20221115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Fix dodgy maths
netfs: Fix missing xas_retry() calls in xarray iteration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Most patches randomly fix error paths or corner cases in fscache mode
reported recently. One fixes an invalid access relating to fragments
on crafted images.
Summary:
- Fix packed_inode invalid access when reading fragments on crafted
images
- Add a missing erofs_put_metabuf() in an error path in fscache mode
- Fix incorrect `count' for unmapped extents in fscache mode
- Fix use-after-free of fsid and domain_id string when remounting
- Fix missing xas_retry() in fscache mode"
* tag 'erofs-for-6.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix missing xas_retry() in fscache mode
erofs: fix use-after-free of fsid and domain_id string
erofs: get correct count for unmapped range in fscache mode
erofs: put metabuf in error path in fscache mode
erofs: fix general protection fault when reading fragment
|
|
DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.
Unify and correct naming while at it.
Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix the dodgy maths in netfs_rreq_unlock_folios(). start_page could be
inside the folio, in which case the calculation of pgpos will be come up
with a negative number (though for the moment rreq->start is rounded down
earlier and folios would have to get merged whilst locked)
Alter how this works to just frame the tracking in terms of absolute file
positions, rather than offsets from the start of the I/O request. This
simplifies the maths and makes it easier to follow.
Fix the issue by using folio_pos() and folio_size() to calculate the end
position of the page.
Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/Y2SJw7w1IsIik3nb@casper.infradead.org/
Link: https://lore.kernel.org/r/166757988611.950645.7626959069846893164.stgit@warthog.procyon.org.uk/ # v2
|
|
netfslib has a number of places in which it performs iteration of an xarray
whilst being under the RCU read lock. It *should* call xas_retry() as the
first thing inside of the loop and do "continue" if it returns true in case
the xarray walker passed out a special value indicating that the walk needs
to be redone from the root[*].
Fix this by adding the missing retry checks.
[*] I wonder if this should be done inside xas_find(), xas_next_node() and
suchlike, but I'm told that's not an simple change to effect.
This can cause an oops like that below. Note the faulting address - this
is an internal value (|0x2) returned from xarray.
BUG: kernel NULL pointer dereference, address: 0000000000000402
...
RIP: 0010:netfs_rreq_unlock+0xef/0x380 [netfs]
...
Call Trace:
netfs_rreq_assess+0xa6/0x240 [netfs]
netfs_readpage+0x173/0x3b0 [netfs]
? init_wait_var_entry+0x50/0x50
filemap_read_page+0x33/0xf0
filemap_get_pages+0x2f2/0x3f0
filemap_read+0xaa/0x320
? do_filp_open+0xb2/0x150
? rmqueue+0x3be/0xe10
ceph_read_iter+0x1fe/0x680 [ceph]
? new_sync_read+0x115/0x1a0
new_sync_read+0x115/0x1a0
vfs_read+0xf3/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Changes:
========
ver #2)
- Changed an unsigned int to a size_t to reduce the likelihood of an
overflow as per Willy's suggestion.
- Added an additional patch to fix the maths.
Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Reported-by: George Law <glaw@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/166749229733.107206.17482609105741691452.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/166757987929.950645.12595273010425381286.stgit@warthog.procyon.org.uk/ # v2
|
|
Add device nodes to enable support for battery and charger status, the
ACPI platform profile, as well as internal and type-cover HID devices
(including sensors, touchpad, keyboard, and other miscellaneous devices)
on the Surface Pro 9.
This does not include support for a tablet-mode switch yet, as that is
now handled via the POS subsystem (unlike the Surface Pro 8, where it is
handled via the KIP subsystem) and therefore needs further changes.
While we're at it, also add the missing comment for the Surface Pro 8.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221113185951.224759-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Currently, we check any received packet whether we have already seen it
previously, regardless of the packet type (sequenced / unsequenced). We
do this by checking the sequence number. This assumes that sequence
numbers are valid for both sequenced and unsequenced packets. However,
this assumption appears to be incorrect.
On some devices, the sequence number field of unsequenced packets (in
particular HID input events on the Surface Pro 9) is always zero. As a
result, the current retransmission check kicks in and discards all but
the first unsequenced packet, breaking (among other things) keyboard and
touchpad input.
Note that we have, so far, only seen packets being retransmitted in
sequenced communication. In particular, this happens when there is an
ACK timeout, causing the EC (or us) to re-send the packet waiting for an
ACK. Arguably, retransmission / duplication of unsequenced packets
should not be an issue as there is no logical condition (such as an ACK
timeout) to determine when a packet should be sent again.
Therefore, remove the retransmission check for unsequenced packets
entirely to resolve the issue.
Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221113185951.224759-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Like the Acer Switch 10 (SW5-012) and Acer Switch 10 (S1003) models
the Acer Switch V 10 (SW5-017) supports reporting SW_TABLET_MODE
through acer-wmi.
Add a DMI quirk for the SW5-017 setting force_caps to ACER_CAP_KBD_DOCK
(these devices have no other acer-wmi based functionality).
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221111111639.35730-1-hdegoede@redhat.com
|
|
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before asus_wmi_set_xusb2pr() returns.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221111100752.134311-1-wangxiongfeng2@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The current logic in the Intel PMC driver will forcefully attach it
when detecting any CPU on the intel_pmc_core_platform_ids array,
even if the matching ACPI device is not present.
There's no checking in pmc_core_probe() to assert that the PMC device
is present, and hence on virtualized environments the PMC device
probes successfully, even if the underlying registers are not present.
Before commit 21ae43570940 ("platform/x86: intel_pmc_core: Substitute PCI
with CPUID enumeration") the driver would check for the presence of a
specific PCI device, and that prevented the driver from attaching when
running virtualized.
Fix by only forcefully attaching the PMC device when not running
virtualized. Note that virtualized platforms can still get the device
to load if the appropriate ACPI device is present on the tables
provided to the VM.
Make an exception for the Xen initial domain, which does have full
hardware access, and hence can attach to the PMC if present.
Fixes: 21ae43570940 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221110163145.80374-1-roger.pau@citrix.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Previously, the s2idle quirk was only active for the 21A0 machine type
of the P14s Gen2a product. This also enables it for the second 21A1 type,
thus reducing wake-up times from s2idle.
Signed-off-by: Lennard Gäher <gaeher@mpi-sws.org>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2181
Link: https://lore.kernel.org/r/20221108072023.17069-1-gaeher@mpi-sws.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add new a new ACPI ID AMDI0009 used by upcoming AMD platform to the pmc
supported list of devices.
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221109083346.361603-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The bridge driver can offload VLANs to the underlying hardware either
via switchdev or the 8021q driver. When the former is used, the VLAN is
marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV'
private flag.
To avoid the memory leaks mentioned in the cited commit, the bridge
driver will try to delete a VLAN via the 8021q driver if the VLAN is not
marked with the previously mentioned flag.
When the VLAN protocol of the bridge changes, switchdev drivers are
notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but
the 8021q driver is also called to add the existing VLANs with the new
protocol and delete them with the old protocol.
In case the VLANs were offloaded via switchdev, the above behavior is
both redundant and buggy. Redundant because the VLANs are already
programmed in hardware and drivers that support VLAN protocol change
(currently only mlx5) change the protocol upon the switchdev attribute
notification. Buggy because the 8021q driver is called despite these
VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to
memory leaks [1] when the VLANs are deleted.
Fix by not calling the 8021q driver for VLANs that were already
programmed via switchdev.
[1]
unreferenced object 0xffff8881f6771200 (size 256):
comm "ip", pid 446855, jiffies 4298238841 (age 55.240s)
hex dump (first 32 bytes):
00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000012819ac>] vlan_vid_add+0x437/0x750
[<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920
[<000000000632b56f>] br_changelink+0x3d6/0x13f0
[<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0
[<00000000f6276baf>] rtnl_newlink+0x5f/0x90
[<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00
[<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340
[<0000000010588814>] netlink_unicast+0x438/0x710
[<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40
[<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0
[<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0
[<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0
[<00000000684f7e25>] __sys_sendmsg+0xab/0x130
[<000000004538b104>] do_syscall_64+0x3d/0x90
[<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 279737939a81 ("net: bridge: Fix VLANs memory leak")
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221114084509.860831-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Hao Lan says:
====================
net: hns3: This series bugfix for the HNS3 ethernet driver.
This series includes some bugfix for the HNS3 ethernet driver.
Patch 1# fix incorrect hw rss hash type of rx packet.
Fixes: 796640778c26 ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b6e62 ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea4858670717 ("net: hns3: handle the BD info on the last BD of the packet")
Patch 2# fix return value check bug of rx copybreak.
Fixes: e74a726da2c4 ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb5f63 ("net: hns3: use bounce buffer when rx page can not be reused")
Patch 3# net: hns3: fix setting incorrect phy link ksettings
for firmware in resetting process
Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs")
Fixes: c5ef83cbb1e9 ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config")
Fixes: 2312e050f42b ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo")
====================
Link: https://lore.kernel.org/r/20221114082048.49450-1-lanhao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
resetting process
Currently, if driver is in phy-imp(phy controlled by imp firmware) mode, as
driver did not update phy link ksettings after initialization process or
not update advertising when getting phy link ksettings from firmware, it
may set incorrect phy link ksettings for firmware in resetting process.
So fix it.
Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs")
Fixes: c5ef83cbb1e9 ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config")
Fixes: 2312e050f42b ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The refactoring of rx copybreak modifies the original return logic, which
will make this feature unavailable. So this patch fixes the return logic of
rx copybreak.
Fixes: e74a726da2c4 ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb5f63 ("net: hns3: use bounce buffer when rx page can not be reused")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the HNS3 driver reports the rss hash type
of each packet based on the rss hash tuples set. It
always reports PKT_HASH_TYPE_L4, without checking the
type of current packet. It's incorrect.
Fixes it by reporting it base on the packet type.
Fixes: 796640778c26 ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b6e62 ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea4858670717 ("net: hns3: handle the BD info on the last BD of the packet")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sleep time is added to ensure the phy to be ready after loopback
bit was set. This to prevent the phy loopback test from failing.
Fixes: 020a45aff119 ("net: phy: marvell: add Marvell specific PHY loopback")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Aminuddin Jamaluddin <aminuddin.jamaluddin@intel.com>
Link: https://lore.kernel.org/r/20221114065302.10625-1-aminuddin.jamaluddin@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ena_init() won't destroy workqueue created by
create_singlethread_workqueue() when pci_register_driver() failed.
Call destroy_workqueue() when pci_register_driver() failed to prevent the
resource leak.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20221114025659.124726-1-yuancan@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sk->sk_receive_queue is protected by skb queue lock, but for KCM
sockets its RX path takes mux->rx_lock to protect more than just
skb queue. However, kcm_recvmsg() still only grabs the skb queue
lock, so race conditions still exist.
We can teach kcm_recvmsg() to grab mux->rx_lock too but this would
introduce a potential performance regression as struct kcm_mux can
be shared by multiple KCM sockets.
So we have to enforce skb queue lock in requeue_rx_msgs() and handle
skb peek case carefully in kcm_wait_data(). Fortunately,
skb_recv_datagram() already handles it nicely and is widely used by
other sockets, we can just switch to skb_recv_datagram() after
getting rid of the unnecessary sock lock in kcm_recvmsg() and
kcm_splice_read(). Side note: SOCK_DONE is not used by KCM sockets,
so it is safe to get rid of this check too.
I ran the original syzbot reproducer for 30 min without seeing any
issue.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+278279efdd2730dd14bf@syzkaller.appspotmail.com
Reported-by: shaozhengchao <shaozhengchao@huawei.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20221114005119.597905-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
commit b37fe34c8309 ("platform/x86/amd: pmc: remove CONFIG_DEBUG_FS
checks") removed most CONFIG_DEBUG_FS checks, but there were some
left that were reported to cause compile test failures.
Remove the remaining checks, and also the unnecessary CONFIG_SUSPEND
used in the same place.
Reported-by: liyupeng@zbhlos.com
Fixes: b37fe34c8309 ("platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216679
Link: https://lore.kernel.org/r/20221108023323.19304-1-mario.limonciello@amd.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The kernel test robot complains that in certain combinations
when building the Mediatek drivers as modules we lack some
debounce table symbols, so export them.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1ff91f9d230 ("pinctrl: mediatek: Fix EINT pins input debounce time configuration")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of "0x01" use the HVM_PARAM_CALLBACK_TYPE_PCI_INTX define from
the interface header in get_callback_via().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
A problem about ionic create debugfs failed is triggered with the
following log given:
[ 415.799514] debugfs: Directory 'ionic' with parent '/' already present!
The reason is that ionic_init_module() returns ionic_bus_register_driver()
directly without checking its return value, if ionic_bus_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ionic can never be created later.
ionic_init_module()
ionic_debugfs_create() # create debugfs directory
ionic_bus_register_driver()
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when ionic_bus_register_driver() returns error.
Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FDB entries that perform VXLAN encapsulation with an IPv6 underlay hold
a reference on a resource - the KVDL entry where the IPv6 underlay
destination IP is stored. For that, the driver maintains two hash tables:
1. Maps IPv6 to KVDL index
2. Maps {MAC, FID index} to IPv6 address
When a FDB entry is removed, the second table is used to find the relevant
IPv6 address and the first table is used to remove the reference count and
free the index if is not used anymore.
In order for a packet to be forwarded to a single remote VTEP, FDB
entries need to be configured at both the bridge and VXLAN devices' FDB
tables. Both entries are squashed into one {MAC, VLAN/VNI} -> IP entry
in the hardware. Therefore, in case one entry is removed, the entry will
be removed from the hardware and the remaining entry will be unmarked
with 'offload' flag since it is not offloaded anymore.
For example, the two FDB entries should be added to allow packets to be
forwarded via vx10:
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff self static dst 2001:db8:5::1
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff master static vlan 10
When one entry will be removed, the second one will not be offloaded
anymore. When the first entry (in VXLAN FDB) will be removed / will not be
offloaded anymore, the two mappings in IPv6 hash tables will be removed.
In case that the second entry is removed before the first one, unexpected
warnings[1][2] will be shown in user space as a result of removing the
first entry. The issue is that not offloaded entry is removed, the driver
tries to search the relevant entries in the hash tables, does not find them
and therefore warns.
Do not handle removing of not offloaded VXLAN FDB entries, as they were
already removed when the offload flag was removed.
[1]:
WARNING: CPU: 1 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c:914 mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Call Trace:
<TASK>
mlxsw_sp_port_fdb_tunnel_uc_op+0x6cf/0x7b0 [mlxsw_spectrum]
mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
? finish_task_switch.isra.0+0x8c/0x290
process_one_work+0x1cd/0x390
worker_thread+0x48/0x3c0
? process_one_work+0x390/0x390
kthread+0xe0/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
[2]:
WARNING: CPU: 0 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3035 mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Call Trace:
<TASK>
? mlxsw_sp_port_fdb_tun_uc_op6_sfd_write+0x5c1/0x610 [mlxsw_spectrum]
mlxsw_sp_port_fdb_tunnel_uc_op+0x6ec/0x7b0 [mlxsw_spectrum]
mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
? finish_task_switch.isra.0+0x8c/0x290
process_one_work+0x1cd/0x390
worker_thread+0x48/0x3c0
? process_one_work+0x390/0x390
kthread+0xe0/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 0860c7641634 ("mlxsw: spectrum_nve: Keep track of IPv6 addresses used by FDB entries")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/c186de8cbd28e3eb661e06f31f7f2f2dff30020f.1668184350.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull VFIO fixes from Alex Williamson:
- Fixes for potential container registration leak for drivers not
implementing a close callback, duplicate container de-registrations,
and a regression in support for bus reset on last device close from
a device set (Anthony DeRossi)
* tag 'vfio-v6.1-rc6' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check the device set open count on reset
vfio: Export the device set open count
vfio: Fix container device registration life cycle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
- Placate "$VARIABLE is used uninitialized" warnings
- omap2: Add missing dependency on GPMC
- qcom: Handle ret from parse with codeword_fixup
* tag 'mtd/fixes-for-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: onenand: omap2: add dependency on GPMC
mtd: rawnand: placate "$VARIABLE is used uninitialized" warnings
mtd: rawnand: qcom: handle ret from parse with codeword_fixup
|
|
The xarray iteration only holds the RCU read lock and thus may encounter
XA_RETRY_ENTRY if there's process modifying the xarray concurrently.
This will cause oops when referring to the invalid entry.
Fix this by adding the missing xas_retry(), which will make the
iteration wind back to the root node if XA_RETRY_ENTRY is encountered.
Fixes: d435d53228dd ("erofs: change to use asynchronous io for fscache readpage/readahead")
Suggested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221114121943.29987-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The External Interrupt Controller (EINTC) on all of the supported
MediaTek SoCs does support input debouncing, but not all of them
index the debounce time values (DBNC_SETTING registers) the same way.
Before this change, in some cases, as an example, requesting a debounce
time of 16 milliseconds would mistakenly set the relative DBNC_SETTING
register to 0x2, resulting in a way shorter debounce time of 500uS.
To fix the aforementioned issue, define three different debounce_time
arrays, reflecting the correct register index for each value and for
each register index variant, and make sure that each SoC pinctrl
driver uses the right one.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221111094106.18486-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
free_irq() is missing in case of error in platform_pci_probe(), fix that.
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20221114112124.1965611-1-ruanjinjie@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When Xen domain configures MSI-X, the usual approach is to enable MSI-X
together with masking all of them via the config space, then fill the
table and only then clear PCI_MSIX_FLAGS_MASKALL. Allow doing this via
QEMU running in a stub domain.
Previously, when changing PCI_MSIX_FLAGS_MASKALL was not allowed, the
whole write was aborted, preventing change to the PCI_MSIX_FLAGS_ENABLE
bit too.
Note the Xen hypervisor intercepts this write anyway, and may keep the
PCI_MSIX_FLAGS_MASKALL bit set if it wishes to. It will store the
guest-requested state and will apply it eventually.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20221114103110.1519413-1-marmarek@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In device_add(), dev_set_name() is called to allocate name, if it returns
error, the name need be freed. As comment of device_register() says, it
should use put_device() to give up the reference in the error path. So fix
this by calling put_device(), then the name can be freed in kobject_cleanup().
Fixes: f65c9bb3fb72 ("xen/pcpu: Xen physical cpus online/offline sys interface")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221110152441.401630-1-yangyingliang@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/e91af3c8708af38b1c57e0a2d7eb9765dda0e963.1667336095.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
There are multi-generational drivers like mv88e6xxx which have code like
this:
int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port,
struct ifreq *ifr)
{
if (!chip->info->ptp_support)
return -EOPNOTSUPP;
...
}
DSA wants to deny PTP timestamping on the master if the switch supports
timestamping too. However it currently relies on the presence of the
port_hwtstamp_get() callback to determine PTP capability, and this
clearly does not work in that case (method is present but returns
-EOPNOTSUPP).
We should not deny PTP on the DSA master for those switches which truly
do not support hardware timestamping.
Create a dsa_port_supports_hwtstamp() method which actually probes for
support by calling port_hwtstamp_get() and seeing whether that returned
-EOPNOTSUPP or not.
Fixes: f685e609a301 ("net: dsa: Deny PTP on master if switch supports it")
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221110124345.3901389-1-festevam@gmail.com/
Reported-by: Fabio Estevam <festevam@gmail.com>
Reported-by: Steffen Bätz <steffen@innosonix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch calls free_netdev() to fix it since netdev_priv
is used after unregister.
Fixes: 13adac032982 ("net: mhi_net: Register wwan_ops for link creation")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ziyang Xuan says:
====================
octeon_ep: fix several bugs in exception paths
Find several obvious bugs during code review in exception paths. Provide
this patchset to fix them. Not tested, just compiled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
octep_get_mac_addr() can fail because send mbox message failed. If this
happens, octep_dev->mac_addr will be zero. It should not continue to
initialize. Add exception handling for octep_get_mac_addr() to fix it.
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When occur unsupported_dev and mbox init errors, it did not free oct->conf
and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem.
Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under
unsupported_dev and mbox init errors to fix the problem.
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
octep_get_link_status() can fail because send mbox message failed, then
octep_get_link_status() will return ret less than 0. Excute octep_link_up()
as long as ret is not equal to 0 in octep_open() now. That is not correct.
The value type of link.state is enum octep_ctrl_net_state. Positive value
represents up. Excute octep_link_up() when ret is bigger than 0.
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
octep_napi_add() and octep_napi_enable() are all after
netif_set_real_num_{tx,rx}_queues() in octep_open(), so it is unnecessary
napi rollback under set_queues_err. Delete them to fix it.
Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When pci_register_driver failed, we need to remove debugfs,
which will caused a resource leak, fix it.
Resource leak logs as follows:
[ 52.184456] debugfs: Directory 'bnxt_en' with parent '/' already present!
Fixes: cabfb09d87bd ("bnxt_en: add debugfs support for DIM")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When connecting to client timeout, disconnect client for twice in
chnl_net_open(). Remove one. Compile tested only.
Fixes: 2aa40aef9deb ("caif: Use link layer MTU instead of fixed MTU")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to hlist_for_each_entry_rcu() to silence false
lockdep warning when CONFIG_PROVE_RCU_LIST is enabled.
Execute as follow:
ip link add link eth0 type macvlan mode source macaddr add <MAC-ADDR>
The rtnl_lock is held when macvlan_hash_lookup_source() or
macvlan_fill_info_macaddr() are called in the non-RCU read side section.
So, pass lockdep_rtnl_is_held() to silence false lockdep warning.
Fixes: 79cf79abce71 ("macvlan: add source mode")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should not release reference by put_device() before calling device_initialize().
Fixes: e7d1d4d9ac0d ("mISDN: fix possible memory leak in mISDN_register_device()")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When liquidio driver open failed, it doesn't release resources. Compile
tested only.
Fixes: 5b07aee11227 ("liquidio: MSIX support for CN23XX")
Fixes: dbc97bfd3918 ("net: liquidio: Add missing null pointer checks")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix jump label branch range check
- check kmalloc failures in Loongson64 kexec
- fix builds with clang-14
- fix char/int handling in pic32
* tag 'mips-fixes_6.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: pic32: treat port as signed integer
MIPS: jump_label: Fix compat branch range check
mips: alchemy: gpio: Include the right header
MIPS: Loongson64: Add WARN_ON on kexec related kmalloc failed
MIPS: fix duplicate definitions for exported symbols
mips: boot/compressed: use __NO_FORTIFY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Force the use of SetVirtualAddressMap() on Ampera Altra arm64
machines, which crash in SetTime() if no virtual remapping is used
This is the first time we've added an SMBIOS based quirk on arm64,
but fortunately, we can just call a EFI protocol to grab the type #1
SMBIOS record when running in the stub, so we don't need all the
machinery we have in the kernel proper to parse SMBIOS data.
- Drop a spurious warning on misaligned runtime regions when using 16k
or 64k pages on arm64
* tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Fix handling of misaligned runtime regions and drop warning
arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers.
The sas one is in an unlikely error leg, the debug one is to make it
more standards conformant and the ibmvfc one is to fix a user visible
bug where a failover could lose all paths to the device"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC
scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
scsi: ibmvfc: Avoid path failures during live migration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull additional sound fix from Takashi Iwai:
"A regression fix for the latest memalloc helper change"
* tag 'sound-fix-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: memalloc: Try dma_alloc_noncontiguous() at first
|
