summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-28mac80211: reduce packet loss notifications under loadFelix Fietkau
During strong signal fluctuations under high throughput, few consecutive failed A-MPDU transmissions can easily trigger packet loss notification, and thus (in AP mode) client disconnection. Reduce the number of false positives by checking the A-MPDU status flag and treating a failed A-MPDU as a single packet. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-28mac80211: don't check netdev state for debugfs read/writeArik Nemtsov
Doing so will lead to an oops for a p2p-dev interface, since it has no netdev. Cc: stable@vger.kernel.org Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-28wireless: add missing WLAN_EID_BSS_INTOLERANT_CHL_REPORTJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-28mac80211: fix a memory leak on sta rate selection tableFelix Fietkau
If the rate control algorithm uses a selection table, it is leaked when the station is destroyed - fix that. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Christophe Prévotaux <cprevotaux@nltinc.com> Fixes: 0d528d85c519 ("mac80211: improve the rate control API") Cc: stable@vger.kernel.org # v3.10+ [add commit log entry, remove pointless NULL check] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-27regdb: Generalize the mW to dBm power conversionchaitanya.mgit@gmail.com
Generalize the power conversion from mW to dBm using log. This should fix the below compilation error for country NO which adds a new power value 2000mW which is not handled earlier. CC [M] net/wireless/wext-sme.o CC [M] net/wireless/regdb.o net/wireless/regdb.c:1130:1: error: Unknown undeclared here (not in a function) net/wireless/regdb.c:1130:9: error: expected } before power make[2]: *** [net/wireless/regdb.o] Error 1 make[1]: *** [net/wireless] Error 2 make: *** [net] Error 2 Reported-By: John Walker <john@x109.net> Signed-off-by: Chaitanya T K <chaitanya.mgit@gmail.com> Acked-by: John W. Linville <linville@tuxdriver.com> [remove unneeded parentheses, fix rounding by using %.0f] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-27ath10k: abort incomplete scatter-gather pci tx properlyMichal Kazior
This prevents leaving incomplete scatter-gather transfer on CE rings which can lead firmware to crash. Reported-By: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: protect src_ring state with ce_lock in tx_sg()Michal Kazior
It was possible to read invalid state of CE ring buffer indexes. This could lead to scatter-gather transfer failure in mid-way and crash firmware later by leaving garbage data on the ring. Reported-By: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: ensure rx-frag ignores rssiBen Greear
It seems ath10k firmware gives us no way to know the rssi for rx-fragments. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: dont configure bssid for ap modeMichal Kazior
FW creates self-peer for AP internally. This prevents ath10k from trying to create explicit self-peer during hw recovery and thus prevents a timeout and a warning during teardown: ath10k: removing stale peer $AP_BSSID from vdev_id 0 Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: protect wep tx key setupMichal Kazior
All configuration sequences should be protected with conf_mutex to avoid concurrent/conflicting requests. This should make sure that wep tx key setup is not performed while hw is restarted (at least). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: drain tx before restarting hwMichal Kazior
This makes sure no further tx requests are submitted to HTT before driver teardown. This should prevent invalid pointer/NULL dereference on htt tx pool in ath10k_htt_tx() in some cases of heavy traffic. kvalo: remove the WARN_ON() if conf_mutex is held Reported-By: Ben Greear <greearb@candelatech.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: perform hw restart lazilyMichal Kazior
This reduces risk of races and prepares for more hw restart fixes. It also makes sense to perform teardown after mac80211 starts its restart routine as it guarantees it has stopped itself by then (including tx queues). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: clean up start() callbackMichal Kazior
This fixes failpath when override AC pdev param setup fails and makes other pdev params setting fail as well. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27mac80211: fix IBSS join by initializing last_scan_completedKrzysztof Hałasa
Without this fix, freshly rebooted Linux creates a new IBSS instead of joining an existing one. Only when jiffies counter overflows after 5 minutes the IBSS can be successfully joined. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> [edit commit message slightly] Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-26cfg80211: send events when devices are added/removedJohannes Berg
We're currently sending NEW_WIPHY events for renames (which is a bit odd, but now can't be changed), but also send them for really new devices that register. Also send DEL_WIPHY events when a device is removed, the event ID for this was already reserved. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-26ath10k: make core registering asyncMichal Kazior
If ath10k was built into the kernel it could stall booting for 120 seconds by default (60 seconds for each firmware API variant) waiting for firmware files before userspace was ready or filesystems mounted. Fix this by making the core registering asynchronous. This also shoves off about 1 second from boot time on most systems since the driver is now mostly initialized in a worker and modprobe takes very little time to complete. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-26ath10k: remove unnecessary tasklet_kill()Michal Kazior
The tasklet is already guaranteed to be killed on the teardown path. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-26ath10k: relocate core create/destroy functionsMichal Kazior
This will avoid unnecessary forward declaration of any kind in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-26ath10k: fix protected flag strippingMichal Kazior
This prevents protected flag being stripped from undecrypted raw sniffed frames when monitor interface is active. Reported-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Tested-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-26mac80211: fix virtual monitor interface additionEmmanuel Grumbach
Since the commit below, cfg80211_chandef_dfs_required() will warn if it gets a an NL80211_IFTYPE_UNSPECIFIED iftype as explicitely written in the commit log. When an virtual monitor interface is added, its type is set in ieee80211_sub_if_data.vif.type, but not in ieee80211_sub_if_data.wdev.iftype which is passed to cfg80211_chandef_dfs_required() hence resulting in the following warning: WARNING: CPU: 1 PID: 21265 at net/wireless/chan.c:376 cfg80211_chandef_dfs_required+0xbc/0x130 [cfg80211]() Modules linked in: [...] CPU: 1 PID: 21265 Comm: ifconfig Tainted: G W O 3.13.11+ #12 Hardware name: Dell Inc. Latitude E6410/0667CC, BIOS A01 03/05/2010 0000000000000009 ffff88008f5fdb08 ffffffff817d4219 ffff88008f5fdb50 ffff88008f5fdb40 ffffffff8106f57d 0000000000000000 0000000000000000 ffff880081062fb8 ffff8800810604e0 0000000000000001 ffff88008f5fdba0 Call Trace: [<ffffffff817d4219>] dump_stack+0x4d/0x66 [<ffffffff8106f57d>] warn_slowpath_common+0x7d/0xa0 [<ffffffff8106f5ec>] warn_slowpath_fmt+0x4c/0x50 [<ffffffffa04ea4ec>] cfg80211_chandef_dfs_required+0xbc/0x130 [cfg80211] [<ffffffffa06b1024>] ieee80211_vif_use_channel+0x94/0x500 [mac80211] [<ffffffffa0684e6b>] ieee80211_add_virtual_monitor+0x1ab/0x5c0 [mac80211] [<ffffffffa0686ae5>] ieee80211_do_open+0xe75/0x1580 [mac80211] [<ffffffffa0687259>] ieee80211_open+0x69/0x70 [mac80211] [snip] Fixes: 00ec75fc5a64 ("cfg80211: pass the actual iftype when calling cfg80211_chandef_dfs_required()") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-26mac80211: add a single-transaction driver op to switch contextsLuciano Coelho
In some cases, when the driver is already using all the channel contexts it can handle at once, we have to do an in-place switch (ie. we cannot afford using an extra context temporarily for the transaction). But some drivers may not support switching the channel context assigned to a vif on the fly (ie. without unassigning and assigning it) while others may only work if the context is changed on the fly, without unassigning it first. To allow these different scenarios, add a new driver operation that let's the driver decide how to handle an in-place switch. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-26NFC: trf7970a: Add support for Felica Type 3 tagsMark A. Greer
Add support for the Felica protocol and Type 3 tags. Both 212 and 424 kbps are supported. Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-26NFC: nfc_sock_link() can be staticFengguang Wu
CC: Hiren Tandel <hirent@marvell.com> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-26NFC: digital: digital_in_send_attrib_req() can be staticFengguang Wu
CC: "Mark A. Greer" <mgreer@animalcreek.com> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-26NFC: dts: st21nfca_i2c: Correct minor typo in documentationChristophe Ricard
Replaced st,st21nfca-i2c by st,st21nfca_i2c to be concistent with below configuration and driver in drivers/nfc/st21nfca/ Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-26NFC: digital: Randomize poll cyclesThierry Escande
This change adds some entropy to polling cycles, choosing the next polling rf technology randomly. This reflects the change done in the pn533 driver, avoiding possible infinite loop for devices that export 2 targets on 2 different modulations. If the first target is not readable, we will stay in an error loop for ever. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-26NFC: digital: Return proper error code when sending ATR_REQThierry Escande
The error code returned by digital_in_send_cmd() was not returned by digital_in_send_atr_req(). Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-26NFC: port100: Add support for type 4B tagThierry Escande
This patch adds support for ISO-DEP protocol over NFC-B rf technology by adding NFC_PROTO_ISO14443_B to the supported protocols and an entry for framing configuration. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-23Bluetooth: Clearly distinguish mgmt LTK type from authenticated propertyJohan Hedberg
On the mgmt level we have a key type parameter which currently accepts two possible values: 0x00 for unauthenticated and 0x01 for authenticated. However, in the internal struct smp_ltk representation we have an explicit "authenticated" boolean value. To make this distinction clear, add defines for the possible mgmt values and do conversion to and from the internal authenticated value. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-05-23ath9k/ath10k: remove unnecessary channel_switch_beacon callbacksLuciano Coelho
The channel_switch_beacon callback is optional, so it doesn't have to be defined if it's not going to do anything useful with it. Both ath9k and ath10k define the callback and just returns. This commit removes them. Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-23ath10k: fix ath10k_bmi_read32 macroFrederic Danis
tmp may be used uninitialized if ath10k_bmi_read_memory() returns an error. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-23ath10k: prevent hif_stop being called twiceMichal Kazior
Recently there was a bug discovered that involved hif_stop() being called twice that ended up with a double free_irq() call but it only manifested with multiple MSI interrupts mapping. Catch this kind of a problem early in driver regardless of interrupt mapping. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-23ath10k: fix core start sequenceMichal Kazior
It was possible to call hif_stop() 2 times through ath10k_htc_connect_init() timeout failpath which could lead to double free_irq() kernel splat for multiple MSI interrupt case. Re-order init sequence to avoid this problem. The HTC stop shouldn't stop HIF implicitly since it doesn't implicitly start it. Since the re-ordering required some functions to be split/removed/renamed rename a few functions to make more sense while at it. Reported-By: Ben Greear <greearb@candelatech.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-22mwifiex: use 'const' qualifier for 2nd arg of mwifiex_tdls_add_ht_operJohn W. Linville
Fixes the following warning: CC drivers/net/wireless/mwifiex/tdls.o drivers/net/wireless/mwifiex/tdls.c: In function ‘mwifiex_prep_tdls_encap_data’: drivers/net/wireless/mwifiex/tdls.c:475:4: warning: passing argument 2 of ‘mwifiex_tdls_add_ht_oper’ discards ‘const’ qualifier from pointer target type [enabled by default] ret = mwifiex_tdls_add_ht_oper(priv, peer, 1, skb); ^ drivers/net/wireless/mwifiex/tdls.c:190:1: note: expected ‘u8 *’ but argument is of type ‘const u8 *’ mwifiex_tdls_add_ht_oper(struct mwifiex_private *priv, u8 *mac, ^ drivers/net/wireless/mwifiex/tdls.c:481:4: warning: passing argument 2 of ‘mwifiex_tdls_add_ht_oper’ discards ‘const’ qualifier from pointer target type [enabled by default] ret = mwifiex_tdls_add_ht_oper(priv, peer, 0, skb); ^ drivers/net/wireless/mwifiex/tdls.c:190:1: note: expected ‘u8 *’ but argument is of type ‘const u8 *’ mwifiex_tdls_add_ht_oper(struct mwifiex_private *priv, u8 *mac, ^ Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: fix sleep timer during suspendRajkumar Manoharan
On idle state, sleep timer is scheduled to put the chip into fullsleep. But during suspend, this timer is scheduled after the chip is moved to fullsleep forcibily. This is causing below unnecessary error messages in kernel log during suspend. ath: phy2: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 ath: phy2: RX failed to go idle in 10 ms RXSM=0xdeadbeef ath: phy2: DMA failed to stop in 10 ms AR_CR=0xdeadbeef AR_DIAG_SW=0xdeadbeef DMADBG_7=0xdeadbeef Reported-by: Arkh4mKn1ght <arkh4mkn1ght@gmail.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: Handle multiple keys while setting tx filtersRajkumar Manoharan
The keycache index is used to abort transmission for given station when it goes to sleep state. But the commit "ath9k_hw: Abort transmission for sleeping station" is not handling multi-key station. Fix that. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: update seq number correctly for packets from TDLS peerAvinash Patil
This patch adds handling of updating rx sequence number for packets received from TDLS peer. Current implementation of mwifiex_queueing_ra_based assumes station would always receive packets from AP which is not true in case of TDLS. Fix this by adding this case. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: set TDLS flags for AMSDU packetsAvinash Patil
This patch fixes an issue where AMSDU packets for TDLS link would flow over infra link. This happened because we were missing setting TDLS flag in TxPD on AMSDU packets. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: delete TDLS link upon Teardown eventAvinash Patil
If userspace application does not take care of TDLS teardown event, TDLS link would be present in driver database and thus driver would send such packets on direct link while peer has already severed link causing data traffic failure. Disable TDLS link upon teardown event so as to ensure this does not happen. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: silence TDLS link delete failure for nonexistent linkAvinash Patil
If TDLS link delete command fails because of non-existent peer or TDLS peer is absent from driver's entry, it means link was already deleted. In such case print debug messages with lower severity. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: avoid TDLS check for packets destined to APAvinash Patil
In station role if TDLS is supported, we traverse TDLS peer list to see if packet's destination address matches with TDLS peer. Packets destined to AP are not sent over TDLS link and hence avoid this list traversal for such packets. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: fix build error with disabled debugZefir Kurtisi
DFS pulse interval printing is only available when CONFIG_ATH9K_DEBUGFS is set. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: N-PHY: add missing calib values for radio 0x2026 rev 11Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix list of 5 GHz channels for 802.11n cardsRafał Miłecki
Broadcom hardware uses a bit tricky hw_value-s for 5 GHz channels, values 184-228 are used for 4920-5140 MHz center frequencies. Normally you expect channels 7-16 (e.g. 5060 MHz is channel 12, not 212). We never meant to register hw_value 228 with freq 6140 MHz (5000 + 228 * 5). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix typo in define name for 2 GHz channels (s/CHAN4G/CHAN2G/)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22libertas: fix return value when processing invalid packetDan Williams
Nothing actually uses the return value yet, but we might as well make it correct, like process_rxed_802_11_packet() does for the same case. Also ensure that if monitor mode is enabled (and thus process_rxed_802_11_packet() is called) that the debugging enter/leave functions are balanced. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22rt2x00: Endless loop on hub port power downRichard Genoud
I've met an endless (or at least very long) loop if I power down the usb port on witch a usb wifi key is plugged. (Ok, it's not very smart to power down a usb port when a usb key is in used... but still, I think that should not lead to an endless loop). I have a lot of: ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -71 (-71==-EPROTO) How to reproduce: - plug an usb wifi key - ip link set wlan0 up - hub-ctrl -b usb_bus -d usb_device -P usb_port -p 0 hub-ctrl source: https://github.com/codazoda/hub-ctrl.c/blob/master/hub-ctrl.c The following patch prevents the endless loop, but I'm really not sure that The Right Way To Do It (R) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22carl9170: fix leaks at failure path in carl9170_usb_probe()Alexey Khoroshilov
carl9170_usb_probe() does not handle request_firmware_nowait() failure that leads to several leaks in this case. The patch adds all required deallocations. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 07:05:46 +0000