summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-09sfc: Report TX completions to BQL after all TX events in interruptPeter Dunning
The limit for BQL is updated each time we call netdev_tx_completed_queue. Without this patch the BQL limit was updated for every TX event we see. The issue was that this only updated the limit to handle the data we complete in two events as the first event wouldn't show that enough traffic had been processed between them. This was OK when interrupt moderation was off but not when it was on as more data had to be completed in a single interrupt. The patch changes this so that we do report the completion to BQL only when all the TX events in the interrupt have been processed. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08drivers/net/usb: add device id for NVIDIA Tegra USB 3.0 EthernetZheng Liu
This device is sold as 'NVIDIA Tegra USB 3.0 Ethernet'. Chipset is RTL8153 and works with r8152. Signed-off-by: Zheng Liu <zhliu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-083c59x: Fix shared IRQ handlingDenys Vlasenko
As its first order of business, boomerang_interrupt() checks whether the device really has any pending interrupts. If it does not, it does nothing and returns, but it still returns IRQ_HANDLED. This is wrong: interrupt was not handled, IRQ handlers of other devices sharing this IRQ line need to be called. vortex_interrupt() has it right: it returns IRQ_NONE in this case via IRQ_RETVAL(0). Do the same in boomerang_interrupt(). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08vmxnet3: prevent receive getting out of sequence on napi pollNeil Horman
vmxnet3's current napi path is built to count every rx descriptor we recieve, and use that as a count of the napi budget. That means its possible to return from a napi poll halfway through recieving a fragmented packet accross multiple dma descriptors. If that happens, the next napi poll will start with the descriptor ring in an improper state (e.g. the first descriptor we look at may have the end-of-packet bit set), which will cause a BUG halt in the driver. Fix the issue by only counting whole received packets in the napi poll and returning that value, rather than the descriptor count. Tested by the reporter and myself, successfully Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08ipv4: add support for linkdown sysctl to netconfAndy Gospodarek
This kernel patch exports the value of the new ignore_routes_with_linkdown via netconf. v2: changes to notify userspace via netlink when sysctl values change and proposed for 'net' since this could be considered a bugfix Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Suggested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08Merge tag 'pm+acpi-4.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are fixes on top of the previous PM+ACPI pull requests (including one fix for a 4.1 regression) and two commits adding _CLS-based device enumeration support to the ACPI core and the ATA subsystem that waited for the latest ACPICA changes to be merged. Specifics: - Fix for an ACPI resources management regression introduced during the 4.1 cycle (that unfortunately went into -stable) effectively reverting the bad commit along with the recent fixups on top of it and using an alternative approach to address the underlying issue (Rafael J Wysocki). - Fix for a memory leak and an incorrect return value in an error code path in the ACPI LPSS (Low-Power Subsystem) driver (Rafael J Wysocki). - Fix for a leftover dangling pointer in an error code path in the new wakeup IRQ support code (Rafael J Wysocki). - Fix to prevent infinite loops (due to errors in other places) from happening in the core generic PM domains support code (Geert Uytterhoeven). - Hibernation documentation update/clarification (Uwe Geuder). - Support for _CLS-based device enumeration in the ACPI core and in the ATA subsystem (Suravee Suthikulpanit)" * tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / wakeirq: Avoid setting power.wakeirq too hastily ata: ahci_platform: Add ACPI _CLS matching ACPI / scan: Add support for ACPI _CLS device matching PM / hibernate: clarify resume documentation PM / Domains: Avoid infinite loops in attach/detach code ACPI / LPSS: Fix up acpi_lpss_create_device() ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage
2015-07-08Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile fix from Chris Metcalf: "This fix eliminates a "section mismatch" warning caused by the new __ex_table checking code in modpost" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: modpost: work correctly with tile coldtext sections
2015-07-08Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module fix from Rusty Russell: "Single fix: missing rbtree removal in the module load failure path. Easy to trigger with bad params. Thanks to Peter Zijlstra and Arthur Marsh for going around on this one" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Fix load_module() error path
2015-07-08sfc: Ensure down_write(&filter_sem) and up_write() are matched before ↵Shradha Shah
calling efx_net_open() This patch avoids the double up_write to filter_sem if efx_net_open() fails. Resolves: 2d432f20d27c1813a2746008e16dd6ce12a14dc1 Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08bridge: mdb: zero out the local br_ip variable before useNikolay Aleksandrov
Since commit b0e9a30dd669 ("bridge: Add vlan id to multicast groups") there's a check in br_ip_equal() for a matching vlan id, but the mdb functions were not modified to use (or at least zero it) so when an entry was added it would have a garbage vlan id (from the local br_ip variable in __br_mdb_add/del) and this would prevent it from being matched and also deleted. So zero out the whole local ip var to protect ourselves from future changes and also to fix the current bug, since there's no vlan id support in the mdb uapi - use always vlan id 0. Example before patch: root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent RTNETLINK answers: Invalid argument After patch: root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Fixes: b0e9a30dd669 ("bridge: Add vlan id to multicast groups") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08drivers: net: cpsw: fix crash while accessing second slave ethernet interfaceMugunthan V N
When cpsw's number of slave is set to 1 in device tree and while accessing second slave ndev and priv in cpsw_tx_interrupt(), there is a kernel crash. This is due to cpsw_get_slave_priv() not verifying number of slaves while retriving netdev priv and returns a invalid memory region. Fixing the issue by introducing number of slave check in cpsw_get_slave_priv() and cpsw_get_slave_ndev(). [ 15.879589] Unable to handle kernel paging request at virtual address 0f0e142c [ 15.888540] pgd = ed374000 [ 15.891359] [0f0e142c] *pgd=00000000 [ 15.895105] Internal error: Oops: 5 [#1] SMP ARM [ 15.899936] Modules linked in: [ 15.903139] CPU: 0 PID: 593 Comm: udhcpc Tainted: G W 4.1.0-12205-gfda8b18-dirty #10 [ 15.912386] Hardware name: Generic AM43 (Flattened Device Tree) [ 15.918557] task: ed2a2e00 ti: ed3fe000 task.ti: ed3fe000 [ 15.924187] PC is at cpsw_tx_interrupt+0x30/0x44 [ 15.929008] LR is at _raw_spin_unlock_irqrestore+0x40/0x44 [ 15.934726] pc : [<c048b9cc>] lr : [<c05ef4f4>] psr: 20000193 [ 15.934726] sp : ed3ffc08 ip : ed2a2e40 fp : 00000000 [ 15.946685] r10: c0969ce8 r9 : c0969cfc r8 : 00000000 [ 15.952129] r7 : 000000c6 r6 : ee54ab00 r5 : ee169c64 r4 : ee534e00 [ 15.958932] r3 : 0f0e0d0c r2 : 00000000 r1 : ed3ffbc0 r0 : 00000001 [ 15.965735] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 15.973261] Control: 10c5387d Table: ad374059 DAC: 00000015 [ 15.979246] Process udhcpc (pid: 593, stack limit = 0xed3fe218) [ 15.985414] Stack: (0xed3ffc08 to 0xed400000) [ 15.989954] fc00: ee54ab00 c009928c c0a9e648 60000193 000032e4 ee169c00 [ 15.998478] fc20: ee169c64 ee169c00 ee169c64 ee54ab00 00000001 00000001 ee67e268 ee008800 [ 16.006995] fc40: ee534800 c009946c ee169c00 ee169c64 c08bd660 c009c370 c009c2a4 000000c6 [ 16.015513] fc60: c08b75c4 c08b0854 00000000 c0098b3c 000000c6 c0098c50 ed3ffcb0 0000003a [ 16.024033] fc80: ed3ffcb0 fa24010c c08b7800 fa240100 ee7e9880 c00094c4 c05ef4e8 60000013 [ 16.032556] fca0: ffffffff ed3ffce4 ee7e9880 c05ef964 00000001 ed2a33d8 00000000 ed2a2e00 [ 16.041080] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800 [ 16.049603] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff 00000001 00000001 [ 16.058121] fd00: ee536bf8 c0487a04 00000000 00000000 ee534800 00000000 00000156 c048c990 [ 16.066645] fd20: 00000000 00000000 c0969f40 00000000 00000000 c05000e8 00000001 00000000 [ 16.075167] fd40: 00000000 c051eefc 00000000 ee67e268 00000000 00000000 ee51b800 ed3ffd9c [ 16.083690] fd60: 00000000 ee67e200 ee51b800 ee7e9880 ee67e268 00000000 00000000 ee67e200 [ 16.092211] fd80: ee51b800 ee7e9880 ee67e268 ee534800 ee67e200 c051eedc ee67e268 00000010 [ 16.100727] fda0: 00000000 00000000 ee7e9880 ee534800 00000000 ee67e268 ee51b800 c05006fc [ 16.109247] fdc0: ee67e268 00000001 c0500488 00000156 ee7e9880 00000000 ed3fe000 fffffff4 [ 16.117771] fde0: ed3fff1c ee7e9880 ee534800 00000148 00000000 ed1f8340 00000000 00000000 [ 16.126289] fe00: 00000000 c05a9054 00000000 00000000 00000156 c0ab62a8 00000010 ed3e7000 [ 16.134812] fe20: 00000000 00000008 edcfb700 ed3fff1c c0fb5f94 ed2a2e00 c0fb5f64 000005d8 [ 16.143336] fe40: c0a9b3b8 00000000 ed3e7070 00000000 00000000 00000000 00009f40 00000000 [ 16.151858] fe60: 00000000 00020022 00110008 00000000 00000000 43004400 00000000 ffffffff [ 16.160374] fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 16.168898] fea0: edcfb700 bee5f380 00000014 00000000 ed3fe000 00000000 00004400 c04e2b64 [ 16.177415] fec0: 00000002 c04e3b00 ed3ffeec 00000001 0000011a 00000000 00000000 bee5f394 [ 16.185937] fee0: 00000148 ed3fff10 00000014 00000001 00000000 00000000 ed3ffee4 00000000 [ 16.194459] ff00: 00000000 00000000 00000000 c04e3664 00080011 00000002 06000000 ffffffff [ 16.202980] ff20: 0000ffff ffffffff 0000ffff c008dd54 ee5a6f08 ee636e80 c096972d c0089c14 [ 16.211499] ff40: 00000000 60000013 ee5a6f40 60000013 00000000 ee5a6f40 00000002 00000006 [ 16.220023] ff60: 00000000 edcfb700 00000001 ed2a2e00 c000f60c 00000001 0000011a c008ea34 [ 16.228540] ff80: 00000006 00000000 bee5f380 00000014 bee5f380 00000014 bee5f380 00000122 [ 16.237059] ffa0: c000f7c4 c000f5e0 bee5f380 00000014 00000006 bee5f394 00000148 00000000 [ 16.245581] ffc0: bee5f380 00000014 bee5f380 00000122 fffffd6e 00004300 00004800 00004400 [ 16.254104] ffe0: bee5f378 bee5f36c 000307ec b6f39044 40000010 00000006 ed36fa40 00000000 [ 16.262642] [<c048b9cc>] (cpsw_tx_interrupt) from [<c009928c>] (handle_irq_event_percpu+0x64/0x204) [ 16.272076] [<c009928c>] (handle_irq_event_percpu) from [<c009946c>] (handle_irq_event+0x40/0x64) [ 16.281330] [<c009946c>] (handle_irq_event) from [<c009c370>] (handle_fasteoi_irq+0xcc/0x1a8) [ 16.290220] [<c009c370>] (handle_fasteoi_irq) from [<c0098b3c>] (generic_handle_irq+0x20/0x30) [ 16.299197] [<c0098b3c>] (generic_handle_irq) from [<c0098c50>] (__handle_domain_irq+0x64/0xdc) [ 16.308273] [<c0098c50>] (__handle_domain_irq) from [<c00094c4>] (gic_handle_irq+0x20/0x60) [ 16.316987] [<c00094c4>] (gic_handle_irq) from [<c05ef964>] (__irq_svc+0x44/0x5c) [ 16.324779] Exception stack(0xed3ffcb0 to 0xed3ffcf8) [ 16.330044] fca0: 00000001 ed2a33d8 00000000 ed2a2e00 [ 16.338567] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800 [ 16.347090] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff [ 16.353987] [<c05ef964>] (__irq_svc) from [<c05ef4e8>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 16.362973] [<c05ef4e8>] (_raw_spin_unlock_irqrestore) from [<c0487a04>] (cpdma_check_free_tx_desc+0x60/0x6c) [ 16.373311] [<c0487a04>] (cpdma_check_free_tx_desc) from [<c048c990>] (cpsw_ndo_start_xmit+0xb4/0x1ac) [ 16.383017] [<c048c990>] (cpsw_ndo_start_xmit) from [<c05000e8>] (dev_hard_start_xmit+0x2a4/0x4c0) [ 16.392364] [<c05000e8>] (dev_hard_start_xmit) from [<c051eedc>] (sch_direct_xmit+0xf4/0x210) [ 16.401246] [<c051eedc>] (sch_direct_xmit) from [<c05006fc>] (__dev_queue_xmit+0x2ac/0x7bc) [ 16.409960] [<c05006fc>] (__dev_queue_xmit) from [<c05a9054>] (packet_sendmsg+0xc68/0xeb4) [ 16.418585] [<c05a9054>] (packet_sendmsg) from [<c04e2b64>] (sock_sendmsg+0x14/0x24) [ 16.426663] [<c04e2b64>] (sock_sendmsg) from [<c04e3b00>] (SyS_sendto+0xb4/0xe0) [ 16.434377] [<c04e3b00>] (SyS_sendto) from [<c000f5e0>] (ret_fast_syscall+0x0/0x54) [ 16.442360] Code: e5943118 e593303c e3530000 0a000002 (e5930720) [ 16.448716] ---[ end trace a68159f094d85ba6 ]--- [ 16.453526] Kernel panic - not syncing: Fatal exception in interrupt [ 16.460149] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08net/tipc: initialize security state for new connection socketStephen Smalley
Calling connect() with an AF_TIPC socket would trigger a series of error messages from SELinux along the lines of: SELinux: Invalid class 0 type=AVC msg=audit(1434126658.487:34500): avc: denied { <unprintable> } for pid=292 comm="kworker/u16:5" scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=<unprintable> permissive=0 This was due to a failure to initialize the security state of the new connection sock by the tipc code, leaving it with junk in the security class field and an unlabeled secid. Add a call to security_sk_clone() to inherit the security state from the parent socket. Reported-by: Tim Shearer <tim.shearer@overturenetworks.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08Merge branch 'sfc-set-mac'David S. Miller
Shradha Shah says: ==================== sfc: compat for lack of VADAPTOR_SET_MAC in adaptor_firmware <= 4.1.1.1023 This patch series resolves an incompatibility with legacy firmware due to the lack of MC_CMD_VADAPTOR_SET_MAC in adaptor_firmware <= 4.1.1.1023 Unless this patch series is applied there will be a compatibility issue between the driver and Solarflare adapters running older firmware. Tested with and without CONFIG_SFC_SRIOV ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08sfc: suppress handled MCDI failures when changing the MAC addressDaniel Pieczko
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08sfc: add legacy method for changing a PF's MAC addressDaniel Pieczko
Some versions of MCFW do not support the MC_CMD_VADAPTOR_SET_MAC command, and ENOSYS will be returned. If the PF created its own vport, the function's datapath must be stopped and the vport can be reconfigured to reflect the new MAC address. If the MCFW created the vport for the PF (which is the case when the nic_data->vport_mac is blank), nothing further needs to be done as the vport is not under the control of the PF. This only applies to PFs because the MCFW in question does not support VFs. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08sfc: refactor code in efx_ef10_set_mac_address()Daniel Pieczko
Re-organize the structure of error handling to avoid having to duplicate the netif_err() around the ifdefs. The only change to the behaviour of the error-handling is that the PF's data structure to record VF details should only be updated if the original command succeeded. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08bonding: "primary_reselect" with "failure" is not working properlyMazhar Rana
When "primary_reselect" is set to "failure", primary interface should not become active until current active slave is down. But if we set first member of bond device as a "primary" interface and "primary_reselect" is set to "failure" then whenever primary interface's link get back(up) it become active slave even if current active slave is still up. With this patch, "bond_find_best_slave" will not traverse members if primary interface is not candidate for failover/reselection and current active slave is still up. Signed-off-by: Mazhar Rana <mazhar.rana@cyberoam.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08ip_tunnel: fix ipv4 pmtu check to honor inner ip header dfTimo Teräs
Frag needed should be sent only if the inner header asked to not fragment. Currently fragmentation is broken if the tunnel has df set, but df was not asked in the original packet. The tunnel's df needs to be still checked to update internally the pmtu cache. Commit 23a3647bc4f93bac broke it, and this commit fixes the ipv4 df check back to the way it was. Fixes: 23a3647bc4f93bac ("ip_tunnels: Use skb-len to PMTU check.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08rtnetlink: verify IFLA_VF_INFO attributes before passing them to driverDaniel Borkmann
Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08net: fec: Ensure clocks are enabled while using mdio busAndrew Lunn
When a switch is attached to the mdio bus, the mdio bus can be used while the interface is not open. If the IPG clock is not enabled, MDIO reads/writes will simply time out. Add support for runtime PM to control this clock. Enable/disable this clock using runtime PM, with open()/close() and mdio read()/write() function triggering runtime PM operations. Since PM is optional, the IPG clock is enabled at probe and is no longer modified by fec_enet_clk_enable(), thus if PM is not enabled in the kernel, it is guaranteed the clock is running when MDIO operations are performed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08amd-xgbe: Fix DMA API debug warningLendacky, Thomas
When running a kernel configured with CONFIG_DMA_API_DEBUG=y a warning is issued: DMA-API: device driver tries to sync DMA memory it has not allocated This warning is the result of mapping the full range of the Rx buffer pages allocated and then performing a dma_sync_single_for_cpu against a calculated DMA address. The proper thing to do is to use the dma_sync_single_range_for_cpu with a base DMA address and an offset. Reported-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08modpost: work correctly with tile coldtext sectionsChris Metcalf
The tilegx and tilepro compilers use .coldtext for their unlikely executed text section name, so an __attribute__((cold)) function will (when compiled with higher optimization levels) land in the .coldtext section. Modify modpost to add .coldtext to the set of OTHER_TEXT_SECTIONS so we don't get warnings about referencing such a section in an __ex_table block, and then also modify arch/tile/lib/memcpy_user_64.c so that it uses plain ".coldtext" instead of ".coldtext.memcpy". The latter naming is a relic of an earlier use of -ffunction-sections, which we no longer use by default. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2015-07-08Revert "dev: set iflink to 0 for virtual interfaces"Nicolas Dichtel
This reverts commit e1622baf54df8cc958bf29d71de5ad545ea7d93c. The side effect of this commit is to add a '@NONE' after each virtual interface name with a 'ip link'. It may break existing scripts. Reported-by: Olivier Hartkopp <socketcan@hartkopp.net> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08net: graceful exit from netif_alloc_netdev_queues()Eric Dumazet
User space can crash kernel with ip link add ifb10 numtxqueues 100000 type ifb We must replace a BUG_ON() by proper test and return -EINVAL for crazy values. Fixes: 60877a32bce00 ("net: allow large number of tx queues") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08rhashtable: fix for resize events during table walkPhil Sutter
If rhashtable_walk_next detects a resize operation in progress, it jumps to the new table and continues walking that one. But it misses to drop the reference to it's current item, leading it to continue traversing the new table's bucket in which the current item is sorted into, and after reaching that bucket's end continues traversing the new table's second bucket instead of the first one, thereby potentially missing items. This fixes the rhashtable runtime test for me. Bug probably introduced by Herbert Xu's patch eddee5ba ("rhashtable: Fix walker behaviour during rehash") although not explicitly tested. Fixes: eddee5ba ("rhashtable: Fix walker behaviour during rehash") Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08bridge: mdb: start delete timer for temp static entriesSatish Ashok
Start the delete timer when adding temp static entries so they can expire. Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: ccb1c31a7a87 ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MGKristina Martsenko
Add a DTS file for the MP2 Cortex-A53 Soft Macrocell Model implemented on a LogicTile Express 20MG (V2F-1XV7) daughterboard. This is based on the version that's currently available from the ARM DTS repository [1]. [1] git://linux-arm.org/arm-dts.git Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-07-08arm: dts: vexpress: add missing CCI PMU device node to TC2Sudeep Holla
The CCI device node was added to vexpress CA15_A7(i.e. TC2) much before the CCI PMU support and binding was added. This patch adds the missing PMU node so that CCI PMUs can be used on TC2. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-07-08arm: dts: vexpress: describe all PMUs in TC2 dtsMark Rutland
The dts for the CoreTile Express A15x2 A7x3 (TC2) only describes the PMUs of the Cortex-A15 CPUs, and not the Cortex-A7 CPUs. Now that we have a mechanism for describing disparate PMUs and their interrupts in device tree, this patch makes use of these to describe the PMUs for all CPUs in the system. For consistency, the existing A15 PMU interrupt-affinity property is reflowed across two lines. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-07-09module: Fix load_module() error pathPeter Zijlstra
The load_module() error path frees a module but forgot to take it out of the mod_tree, leaving a dangling entry in the tree, causing havoc. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Tested-by: Arthur Marsh <arthur.marsh@internode.on.net> Fixes: 93c2e105f6bc ("module: Optimize __module_address() using a latched RB-tree") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-07-08GICv3: Add ITS entry to THUNDER dtsTirumalesh Chalamarla
The PCIe host controller uses MSIs provided by GICv3 ITS. Enable it on Thunder SoCs by adding an entry to DT. Signed-off-by: Tirumalesh Chalamarla <tchalamarla@cavium.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-07-08Merge tag 'sirf-iobrg2regmap-for-4.2' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into fixes Merge "CSR SiRFSoC rtc iobrg move to regmap for 4.2" from Barry Song: move CSR rtc iobrg read/write API to be regmap this moves to general APIs, and all drivers will be changed based on it. * tag 'sirf-iobrg2regmap-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: prima2: move to use REGMAP APIs for rtciobrg
2015-07-08Merge tag 'atlas7-pinctrl-dts-for-4.2' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into fixes Merge "CSR atlas7 pinctrl descriptions for 4.2" from Barry Song: add atlas7 pinctrl dts stuff add atlas7 pin groups and gpio/pin mapping descriptions * tag 'atlas7-pinctrl-dts-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: dts: atlas7: add pinctrl and gpio descriptions
2015-07-08net: phy: add dependency on HAS_IOMEM to MDIO_BUS_MUX_MMIOREGRob Herring
On UML builds, mdio-mux-mmioreg.c fails to compile: drivers/net/phy/mdio-mux-mmioreg.c:50:3: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] drivers/net/phy/mdio-mux-mmioreg.c:63:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] This is due to CONFIG_OF now being user selectable. Add a dependency on HAS_IOMEM to fix this. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08arm64: dts: Add poweroff button device node for APM X-Gene platformY Vo
This patch adds poweroff button device node to support poweroff feature on APM X-Gene Mustang platform. Signed-off-by: Y Vo <yvo@apm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-07-08NET: hamradio: Fix IP over bpq encapsulation.Ralf Baechle
Since 1d5da757da860a6916adbf68b09e868062b4b3b8 (ax25: Stop using magic neighbour cache operations.) any attempt to transmit IP packets over a bpqether device will result in a message like "Dead loop on virtual device bpq0, fix it urgently!" Fix suggested by Eric W. Biederman <ebiederm@xmission.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@vger.kernel.org> # 4.1 Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08net_sched: gen_estimator: extend pps limitEric Dumazet
rate estimators are limited to 4 Mpps, which was fine years ago, but too small with current hardware generation. Lets use 2^5 scaling instead of 2^10 to get 128 Mpps new limit. On 64bit arch, use an "unsigned long" for temp storage and remove limit. (We do not expect 32bit arches to be able to reach this point) Tested: tc -s -d filter sh dev eth0 parent ffff: filter protocol ip pref 1 u32 filter protocol ip pref 1 u32 fh 800: ht divisor 1 filter protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:15 match 07000000/ff000000 at 12 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 166 sec Action statistics: Sent 39734251496 bytes 863788076 pkt (dropped 863788117, overlimits 0 requeues 0) rate 4067Mbit 11053596pps backlog 0b 0p requeues 0 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08arm64: entry: handle debug exceptions in el*_invMark Rutland
Currently we enable debug exceptions before reading ESR_EL1 in both el0_inv and el1_inv. If a debug exception is taken before we read ESR_EL1, the value will have been corrupted. As el*_inv is typically fatal, an intervening debug exception results in misleading debug information being logged to the console, but is not otherwise harmful. As with the other entry paths, we can use the ESR_EL1 value stashed earlier in the exception entry (in x25 for el0_sync{,_compat}, and x1 for el1_sync), giving us better error reporting in this case. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-07-08drm/radeon: fix underflow in r600_cp_dispatch_texture()Dan Carpenter
The "if (pass_size > buf->total)" can underflow so I have changed the type of size and pass_size to unsigned to avoid this problem. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-08drm/radeon: default to 2048 MB GART size on SI+Grigori Goronzy
Newer ASICs have more VRAM on average and allocating more GART as well can have advantages. Also see commit edcd26e8. Ideally, we should scale GART size based on actual VRAM size, but that requires significant restructuring of initialization. v2: extract small helper, apply to error paths Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-08drm/radeon: fix HDP flushingGrigori Goronzy
This was regressed by commit 39e7f6f8, although I don't know of any actual issues caused by it. The storage domain is read without TTM locking now, but the lock never helped to prevent any races. Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-08drm/radeon: use RCU query for GEM_BUSY syscallGrigori Goronzy
We don't need to call the (expensive) radeon_bo_wait, checking the fences via RCU is much faster. The reservation done by radeon_bo_wait does not save us from any race conditions. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-08drm/amdgpu: Handle irqs only based on irq ring, not irq status regs.Mario Kleiner
This is a translation of the patch ... "drm/radeon: Handle irqs only based on irq ring, not irq status regs." ... for the vblank irq handling, to fix the same problem described in that patch on the new driver. Only compile tested due to lack of suitable hw. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> CC: Michel Dänzer <michel.daenzer@amd.com> CC: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-08drm/radeon: Handle irqs only based on irq ring, not irq status regs.Mario Kleiner
Trying to resolve issues with missed vblanks and impossible values inside delivered kms pageflip completion events showed that radeon's irq handling sometimes doesn't handle valid irqs, but silently skips them. This was observed for vblank interrupts. Although those irqs have corresponding events queued in the gpu's irq ring at time of interrupt, and therefore the corresponding handling code gets triggered by these events, the handling code sometimes silently skipped processing the irq. The reason for those skips is that the handling code double-checks for each irq event if the corresponding irq status bits in the irq status registers are set. Sometimes those bits are not set at time of check for valid irqs, maybe due to some hardware race on some setups? The problem only seems to happen on some machine + card combos sometimes, e.g., never happened during my testing of different PC cards of the DCE-2/3/4 generation a year ago, but happens consistently now on two different Apple Mac cards (RV730, DCE-3, Apple iMac and Evergreen JUNIPER, DCE-4 in a Apple MacPro). It also doesn't happen at each interrupt but only occassionally every couple of hundred or thousand vblank interrupts. This results in XOrg warning messages like "[ 7084.472] (WW) RADEON(0): radeon_dri2_flip_event_handler: Pageflip completion event has impossible msc 420120 < target_msc 420121" as well as skipped frames and problems for applications that use kms pageflip events or vblank events, e.g., users of DRI2 and DRI3/Present, Waylands Weston compositor, etc. See also https://bugs.freedesktop.org/show_bug.cgi?id=85203 After some talking to Alex and Michel, we decided to fix this by turning the double-check for asserted irq status bits into a warning. Whenever a irq event is queued in the IH ring, always execute the corresponding interrupt handler. Still check the irq status bits, but only to log a DRM_DEBUG message on a mismatch. This fixed the problems reliably on both previously failing cards, RV-730 dual-head tested on both crtcs (pipes D1 and D2) and a triple-output Juniper HD-5770 card tested on all three available crtcs (D1/D2/D3). The r600 and evergreen irq handling is therefore tested, but the cik an si handling is only compile tested due to lack of hw. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> CC: Michel Dänzer <michel.daenzer@amd.com> CC: Alex Deucher <alexander.deucher@amd.com> CC: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-08Fix broken audit tests for exec arg lenLinus Torvalds
The "fix" in commit 0b08c5e5944 ("audit: Fix check of return value of strnlen_user()") didn't fix anything, it broke things. As reported by Steven Rostedt: "Yes, strnlen_user() returns 0 on fault, but if you look at what len is set to, than you would notice that on fault len would be -1" because we just subtracted one from the return value. So testing against 0 doesn't test for a fault condition, it tests against a perfectly valid empty string. Also fix up the usual braindamage wrt using WARN_ON() inside a conditional - make it part of the conditional and remove the explicit unlikely() (which is already part of the WARN_ON*() logic, exactly so that you don't have to write unreadable code. Reported-and-tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Cc: Paul Moore <pmoore@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-08drm/i915: Use crtc_state->active in primary check_plane funcDaniel Vetter
Since commit 8c7b5ccb729870e606321b3703e2c2e698c49a95 Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Date: Tue Apr 21 17:13:19 2015 +0300 drm/i915: Use atomic helpers for computing changed flags we compute the plane state for a modeset before actually committing any changes, which means crtc->active won't be correct yet. Looking at future work in the modeset conversion targetting 4.3 the only places where crtc_state->active isn't accurate is when disabling other CRTCs than the one the modeset is for (when stealing connectors). Which isn't the case here. And that's also confirmed by an audit, we do unconditionally update crtc_state->active for the current pipe. We also don't need to update any other plane check functions since we only ever add the primary state to the modeset update right now. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-08drm/i915: Check crtc->active in intel_crtc_disable_planesDaniel Vetter
This was lost in commit ce22dba92de22e951dee2ff89937a39754d2dd91 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Tue Apr 21 17:12:56 2015 +0300 drm/i915: Move toggling planes out of crtc enable/disable. and we still need that crtc->active check since the overall modeset flow doesn't yet take dpms state into account properly. Fixes WARNING backtraces on at least bdw/hsw due to the ips disabling code being upset about being run on a switched-off pipe. We don't need a corresponding change on the enable side since with the old setCrtc semantics we always force-enable the pipe after a modeset. And the dpms function intel_crtc_control already checks for ->active. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-08hotplug: Prevent alloc/free of irq descriptors during cpu up/downThomas Gleixner
When a cpu goes up some architectures (e.g. x86) have to walk the irq space to set up the vector space for the cpu. While this needs extra protection at the architecture level we can avoid a few race conditions by preventing the concurrent allocation/free of irq descriptors and the associated data. When a cpu goes down it moves the interrupts which are targeted to this cpu away by reassigning the affinities. While this happens interrupts can be allocated and freed, which opens a can of race conditions in the code which reassignes the affinities because interrupt descriptors might be freed underneath. Example: CPU1 CPU2 cpu_up/down irq_desc = irq_to_desc(irq); remove_from_radix_tree(desc); raw_spin_lock(&desc->lock); free(desc); We could protect the irq descriptors with RCU, but that would require a full tree change of all accesses to interrupt descriptors. But fortunately these kind of race conditions are rather limited to a few things like cpu hotplug. The normal setup/teardown is very well serialized. So the simpler and obvious solution is: Prevent allocation and freeing of interrupt descriptors accross cpu hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
2015-07-08drm/i915: Restore all GGTT VMAs on resumeTvrtko Ursulin
When rotated and partial views were added no one spotted the resume path which assumes only one GGTT VMA per object and hence is now skipping rebind of alternative views. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-08x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help textSébastien Hinderer
Signed-off-by: Sébastien Hinderer <Sebastien.Hinderer@ens-lyon.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Samuel Thibault <Samuel.Thibault@ens-lyon.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 14:55:07 +0000