summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-20Revert "net: fix percpu memory leaks"Jesper Dangaard Brouer
[ Upstream commit 5a63643e583b6a9789d7a225ae076fb4e603991c ] This reverts commit 1d6119baf0610f813eb9d9580eb4fd16de5b4ceb. After reverting commit 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") then here is no need for this fix-up patch. As percpu_counter is no longer used, it cannot memory leak it any-longer. Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") Fixes: 1d6119baf061 ("net: fix percpu memory leaks") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20Revert "net: use lib/percpu_counter API for fragmentation mem accounting"Jesper Dangaard Brouer
[ Upstream commit fb452a1aa3fd4034d7999e309c5466ff2d7005aa ] This reverts commit 6d7b857d541ecd1d9bd997c97242d4ef94b19de2. There is a bug in fragmentation codes use of the percpu_counter API, that can cause issues on systems with many CPUs. The frag_mem_limit() just reads the global counter (fbc->count), without considering other CPUs can have upto batch size (130K) that haven't been subtracted yet. Due to the 3MBytes lower thresh limit, this become dangerous at >=24 CPUs (3*1024*1024/130000=24). The correct API usage would be to use __percpu_counter_compare() which does the right thing, and takes into account the number of (online) CPUs and batch size, to account for this and call __percpu_counter_sum() when needed. We choose to revert the use of the lib/percpu_counter API for frag memory accounting for several reasons: 1) On systems with CPUs > 24, the heavier fully locked __percpu_counter_sum() is always invoked, which will be more expensive than the atomic_t that is reverted to. Given systems with more than 24 CPUs are becoming common this doesn't seem like a good option. To mitigate this, the batch size could be decreased and thresh be increased. 2) The add_frag_mem_limit+sub_frag_mem_limit pairs happen on the RX CPU, before SKBs are pushed into sockets on remote CPUs. Given NICs can only hash on L2 part of the IP-header, the NIC-RXq's will likely be limited. Thus, a fair chance that atomic add+dec happen on the same CPU. Revert note that commit 1d6119baf061 ("net: fix percpu memory leaks") removed init_frag_mem_limit() and instead use inet_frags_init_net(). After this revert, inet_frags_uninit_net() becomes empty. Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") Fixes: 1d6119baf061 ("net: fix percpu memory leaks") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20bridge: switchdev: Clear forward mark when transmitting packetIdo Schimmel
[ Upstream commit 79e99bdd60b484af9afe0147e85a13e66d5c1cdb ] Commit 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices") added the 'offload_fwd_mark' bit to the skb in order to allow drivers to indicate to the bridge driver that they already forwarded the packet in L2. In case the bit is set, before transmitting the packet from each port, the port's mark is compared with the mark stored in the skb's control block. If both marks are equal, we know the packet arrived from a switch device that already forwarded the packet and it's not re-transmitted. However, if the packet is transmitted from the bridge device itself (e.g., br0), we should clear the 'offload_fwd_mark' bit as the mark stored in the skb's control block isn't valid. This scenario can happen in rare cases where a packet was trapped during L3 forwarding and forwarded by the kernel to a bridge device. Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Yotam Gigi <yotamg@mellanox.com> Tested-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20mlxsw: spectrum: Forbid linking to devices that have uppersIdo Schimmel
[ Upstream commit 25cc72a33835ed8a6f53180a822cadab855852ac ] The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the device in case a port is enslaved to a master netdev such as bridge or bond. Since the driver ignores events unrelated to its ports and their uppers, it's possible to engineer situations in which the device's data path differs from the kernel's. One example to such a situation is when a port is enslaved to a bond that is already enslaved to a bridge. When the bond was enslaved the driver ignored the event - as the bond wasn't one of its uppers - and therefore a bridge port instance isn't created in the device. Until such configurations are supported forbid them by checking that the upper device doesn't have uppers of its own. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Nogah Frankel <nogahf@mellanox.com> Tested-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0Wei Wang
[ Upstream commit 499350a5a6e7512d9ed369ed63a4244b6536f4f8 ] When tcp_disconnect() is called, inet_csk_delack_init() sets icsk->icsk_ack.rcv_mss to 0. This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() => __tcp_select_window() call path to have division by 0 issue. So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"Florian Fainelli
[ Upstream commit ebc8254aeae34226d0bc8fda309fd9790d4dccfe ] This reverts commit 7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()") because it is creating the possibility for a NULL pointer dereference. David Daney provide the following call trace and diagram of events: When ndo_stop() is called we call: phy_disconnect() +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL; +---> phy_stop_machine() | +---> phy_state_machine() | +----> queue_delayed_work(): Work queued. +--->phy_detach() implies: phydev->attached_dev = NULL; Now at a later time the queued work does: phy_state_machine() +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL: CPU 12 Unable to handle kernel paging request at virtual address 0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c Oops[#1]: CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1 Workqueue: events_power_efficient phy_state_machine task: 80000004021ed100 task.stack: 8000000409d70000 $ 0 : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004 $ 4 : 0000000000000000 0000000000000001 0000000000000004 0000000000000000 $ 8 : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000 $12 : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b $16 : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800 $20 : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008 $24 : 0000000000000061 ffffffff808637b0 $28 : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c Hi : 000000000000002a Lo : 000000000000003f epc : ffffffff80de37ec netif_carrier_off+0xc/0x58 ra : ffffffff80c7804c phy_state_machine+0x48c/0x4f8 Status: 14009ce3 KX SX UX KERNEL EXL IE Cause : 00800008 (ExcCode 02) BadVA : 0000000000000048 PrId : 000d9501 (Cavium Octeon III) Modules linked in: Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000, task=80000004021ed100, tls=0000000000000000) Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00 0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300 80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001 ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000 8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000 ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240 0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00 8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8 8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08 8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080 ... Call Trace: [<ffffffff80de37ec>] netif_carrier_off+0xc/0x58 [<ffffffff80c7804c>] phy_state_machine+0x48c/0x4f8 [<ffffffff808a1708>] process_one_work+0x158/0x368 [<ffffffff808a1ac0>] worker_thread+0x150/0x4c0 [<ffffffff808a8598>] kthread+0xc8/0xe0 [<ffffffff808617f0>] ret_from_kernel_thread+0x14/0x1c The original motivation for this change originated from Marc Gonzales indicating that his network driver did not have its adjust_link callback executing with phydev->link = 0 while he was expecting it. PHYLIB has never made any such guarantees ever because phy_stop() merely just tells the workqueue to move into PHY_HALTED state which will happen asynchronously. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by: David Daney <ddaney.cavm@gmail.com> Fixes: 7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20kcm: do not attach PF_KCM sockets to avoid deadlockEric Dumazet
[ Upstream commit 351050ecd6523374b370341cc29fe61e2201556b ] syzkaller had no problem to trigger a deadlock, attaching a KCM socket to another one (or itself). (original syzkaller report was a very confusing lockdep splat during a sendmsg()) It seems KCM claims to only support TCP, but no enforcement is done, so we might need to add additional checks. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20packet: Don't write vnet header beyond end of bufferBenjamin Poirier
[ Upstream commit edbd58be15a957f6a760c4a514cd475217eb97fd ] ... which may happen with certain values of tp_reserve and maclen. Fixes: 58d19b19cd99 ("packet: vnet_hdr support for tpacket_rcv") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20cxgb4: Fix stack out-of-bounds read due to wrong size to t4_record_mbox()Stefano Brivio
[ Upstream commit 0f3086868e8889a823a6e0f3d299102aa895d947 ] Passing commands for logging to t4_record_mbox() with size MBOX_LEN, when the actual command size is actually smaller, causes out-of-bounds stack accesses in t4_record_mbox() while copying command words here: for (i = 0; i < size / 8; i++) entry->cmd[i] = be64_to_cpu(cmd[i]); Up to 48 bytes from the stack are then leaked to debugfs. This happens whenever we send (and log) commands described by structs fw_sched_cmd (32 bytes leaked), fw_vi_rxmode_cmd (48), fw_hello_cmd (48), fw_bye_cmd (48), fw_initialize_cmd (48), fw_reset_cmd (48), fw_pfvf_cmd (32), fw_eq_eth_cmd (16), fw_eq_ctrl_cmd (32), fw_eq_ofld_cmd (32), fw_acl_mac_cmd(16), fw_rss_glb_config_cmd(32), fw_rss_vi_config_cmd(32), fw_devlog_cmd(32), fw_vi_enable_cmd(48), fw_port_cmd(32), fw_sched_cmd(32), fw_devlog_cmd(32). The cxgb4vf driver got this right instead. When we call t4_record_mbox() to log a command reply, a MBOX_LEN size can be used though, as get_mbox_rpl() will fill cmd_rpl up completely. Fixes: 7f080c3f2ff0 ("cxgb4: Add support to enable logging of firmware mailbox commands") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20netvsc: fix deadlock betwen link status and removalstephen hemminger
[ Upstream commit 9b4e946ce14e20d7addbfb7d9139e604f9fda107 ] There is a deadlock possible when canceling the link status delayed work queue. The removal process is run with RTNL held, and the link status callback is acquring RTNL. Resolve the issue by using trylock and rescheduling. If cancel is in process, that block it from happening. Fixes: 122a5f6410f4 ("staging: hv: use delayed_work for netvsc_send_garp()") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20qlge: avoid memcpy buffer overflowArnd Bergmann
[ Upstream commit e58f95831e7468d25eb6e41f234842ecfe6f014f ] gcc-8.0.0 (snapshot) points out that we copy a variable-length string into a fixed length field using memcpy() with the destination length, and that ends up copying whatever follows the string: inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2: drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=] memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1); Changing it to use strncpy() will instead zero-pad the destination, which seems to be the right thing to do here. The bug is probably harmless, but it seems like a good idea to address it in stable kernels as well, if only for the purpose of building with gcc-8 without warnings. Fixes: a61f80261306 ("qlge: Add ethtool register dump function.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20sctp: Avoid out-of-bounds reads from address storageStefano Brivio
[ Upstream commit ee6c88bb754e3d363e568da78086adfedb692447 ] inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() copy sizeof(sockaddr_storage) bytes to fill in sockaddr structs used to export diagnostic information to userspace. However, the memory allocated to store sockaddr information is smaller than that and depends on the address family, so we leak up to 100 uninitialized bytes to userspace. Just use the size of the source structs instead, in all the three cases this is what userspace expects. Zero out the remaining memory. Unused bytes (i.e. when IPv4 addresses are used) in source structs sctp_sockaddr_entry and sctp_transport are already cleared by sctp_add_bind_addr() and sctp_transport_new(), respectively. Noticed while testing KASAN-enabled kernel with 'ss': [ 2326.885243] BUG: KASAN: slab-out-of-bounds in inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] at addr ffff881be8779800 [ 2326.896800] Read of size 128 by task ss/9527 [ 2326.901564] CPU: 0 PID: 9527 Comm: ss Not tainted 4.11.0-22.el7a.x86_64 #1 [ 2326.909236] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 2326.917585] Call Trace: [ 2326.920312] dump_stack+0x63/0x8d [ 2326.924014] kasan_object_err+0x21/0x70 [ 2326.928295] kasan_report+0x288/0x540 [ 2326.932380] ? inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.938500] ? skb_put+0x8b/0xd0 [ 2326.942098] ? memset+0x31/0x40 [ 2326.945599] check_memory_region+0x13c/0x1a0 [ 2326.950362] memcpy+0x23/0x50 [ 2326.953669] inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.959596] ? inet_diag_msg_sctpasoc_fill+0x460/0x460 [sctp_diag] [ 2326.966495] ? __lock_sock+0x102/0x150 [ 2326.970671] ? sock_def_wakeup+0x60/0x60 [ 2326.975048] ? remove_wait_queue+0xc0/0xc0 [ 2326.979619] sctp_diag_dump+0x44a/0x760 [sctp_diag] [ 2326.985063] ? sctp_ep_dump+0x280/0x280 [sctp_diag] [ 2326.990504] ? memset+0x31/0x40 [ 2326.994007] ? mutex_lock+0x12/0x40 [ 2326.997900] __inet_diag_dump+0x57/0xb0 [inet_diag] [ 2327.003340] ? __sys_sendmsg+0x150/0x150 [ 2327.007715] inet_diag_dump+0x4d/0x80 [inet_diag] [ 2327.012979] netlink_dump+0x1e6/0x490 [ 2327.017064] __netlink_dump_start+0x28e/0x2c0 [ 2327.021924] inet_diag_handler_cmd+0x189/0x1a0 [inet_diag] [ 2327.028045] ? inet_diag_rcv_msg_compat+0x1b0/0x1b0 [inet_diag] [ 2327.034651] ? inet_diag_dump_compat+0x190/0x190 [inet_diag] [ 2327.040965] ? __netlink_lookup+0x1b9/0x260 [ 2327.045631] sock_diag_rcv_msg+0x18b/0x1e0 [ 2327.050199] netlink_rcv_skb+0x14b/0x180 [ 2327.054574] ? sock_diag_bind+0x60/0x60 [ 2327.058850] sock_diag_rcv+0x28/0x40 [ 2327.062837] netlink_unicast+0x2e7/0x3b0 [ 2327.067212] ? netlink_attachskb+0x330/0x330 [ 2327.071975] ? kasan_check_write+0x14/0x20 [ 2327.076544] netlink_sendmsg+0x5be/0x730 [ 2327.080918] ? netlink_unicast+0x3b0/0x3b0 [ 2327.085486] ? kasan_check_write+0x14/0x20 [ 2327.090057] ? selinux_socket_sendmsg+0x24/0x30 [ 2327.095109] ? netlink_unicast+0x3b0/0x3b0 [ 2327.099678] sock_sendmsg+0x74/0x80 [ 2327.103567] ___sys_sendmsg+0x520/0x530 [ 2327.107844] ? __get_locked_pte+0x178/0x200 [ 2327.112510] ? copy_msghdr_from_user+0x270/0x270 [ 2327.117660] ? vm_insert_page+0x360/0x360 [ 2327.122133] ? vm_insert_pfn_prot+0xb4/0x150 [ 2327.126895] ? vm_insert_pfn+0x32/0x40 [ 2327.131077] ? vvar_fault+0x71/0xd0 [ 2327.134968] ? special_mapping_fault+0x69/0x110 [ 2327.140022] ? __do_fault+0x42/0x120 [ 2327.144008] ? __handle_mm_fault+0x1062/0x17a0 [ 2327.148965] ? __fget_light+0xa7/0xc0 [ 2327.153049] __sys_sendmsg+0xcb/0x150 [ 2327.157133] ? __sys_sendmsg+0xcb/0x150 [ 2327.161409] ? SyS_shutdown+0x140/0x140 [ 2327.165688] ? exit_to_usermode_loop+0xd0/0xd0 [ 2327.170646] ? __do_page_fault+0x55d/0x620 [ 2327.175216] ? __sys_sendmsg+0x150/0x150 [ 2327.179591] SyS_sendmsg+0x12/0x20 [ 2327.183384] do_syscall_64+0xe3/0x230 [ 2327.187471] entry_SYSCALL64_slow_path+0x25/0x25 [ 2327.192622] RIP: 0033:0x7f41d18fa3b0 [ 2327.196608] RSP: 002b:00007ffc3b731218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 2327.205055] RAX: ffffffffffffffda RBX: 00007ffc3b731380 RCX: 00007f41d18fa3b0 [ 2327.213017] RDX: 0000000000000000 RSI: 00007ffc3b731340 RDI: 0000000000000003 [ 2327.220978] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000040 [ 2327.228939] R10: 00007ffc3b730f30 R11: 0000000000000246 R12: 0000000000000003 [ 2327.236901] R13: 00007ffc3b731340 R14: 00007ffc3b7313d0 R15: 0000000000000084 [ 2327.244865] Object at ffff881be87797e0, in cache kmalloc-64 size: 64 [ 2327.251953] Allocated: [ 2327.254581] PID = 9484 [ 2327.257215] save_stack_trace+0x1b/0x20 [ 2327.261485] save_stack+0x46/0xd0 [ 2327.265179] kasan_kmalloc+0xad/0xe0 [ 2327.269165] kmem_cache_alloc_trace+0xe6/0x1d0 [ 2327.274138] sctp_add_bind_addr+0x58/0x180 [sctp] [ 2327.279400] sctp_do_bind+0x208/0x310 [sctp] [ 2327.284176] sctp_bind+0x61/0xa0 [sctp] [ 2327.288455] inet_bind+0x5f/0x3a0 [ 2327.292151] SYSC_bind+0x1a4/0x1e0 [ 2327.295944] SyS_bind+0xe/0x10 [ 2327.299349] do_syscall_64+0xe3/0x230 [ 2327.303433] return_from_SYSCALL_64+0x0/0x6a [ 2327.308194] Freed: [ 2327.310434] PID = 4131 [ 2327.313065] save_stack_trace+0x1b/0x20 [ 2327.317344] save_stack+0x46/0xd0 [ 2327.321040] kasan_slab_free+0x73/0xc0 [ 2327.325220] kfree+0x96/0x1a0 [ 2327.328530] dynamic_kobj_release+0x15/0x40 [ 2327.333195] kobject_release+0x99/0x1e0 [ 2327.337472] kobject_put+0x38/0x70 [ 2327.341266] free_notes_attrs+0x66/0x80 [ 2327.345545] mod_sysfs_teardown+0x1a5/0x270 [ 2327.350211] free_module+0x20/0x2a0 [ 2327.354099] SyS_delete_module+0x2cb/0x2f0 [ 2327.358667] do_syscall_64+0xe3/0x230 [ 2327.362750] return_from_SYSCALL_64+0x0/0x6a [ 2327.367510] Memory state around the buggy address: [ 2327.372855] ffff881be8779700: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc [ 2327.380914] ffff881be8779780: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00 [ 2327.388972] >ffff881be8779800: 00 00 00 00 fc fc fc fc fb fb fb fb fb fb fb fb [ 2327.397031] ^ [ 2327.401792] ffff881be8779880: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc [ 2327.409850] ffff881be8779900: 00 00 00 00 00 04 fc fc fc fc fc fc 00 00 00 00 [ 2327.417907] ================================================================== This fixes CVE-2017-7558. References: https://bugzilla.redhat.com/show_bug.cgi?id=1480266 Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Cc: Xin Long <lucien.xin@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20fsl/man: Inherit parent device and of_nodeFlorian Fainelli
[ Upstream commit a1a50c8e4c241a505b7270e1a3c6e50d94e794b1 ] Junote Cai reported that he was not able to get a DSA setup involving the Freescale DPAA/FMAN driver to work and narrowed it down to of_find_net_device_by_node(). This function requires the network device's device reference to be correctly set which is the case here, though we have lost any device_node association there. The problem is that dpaa_eth_add_device() allocates a "dpaa-ethernet" platform device, and later on dpaa_eth_probe() is called but SET_NETDEV_DEV() won't be propagating &pdev->dev.of_node properly. Fix this by inherenting both the parent device and the of_node when dpaa_eth_add_device() creates the platform device. Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20udp: on peeking bad csum, drop packets even if not at headEric Dumazet
[ Upstream commit fd6055a806edc4019be1b9fb7d25262599bca5b1 ] When peeking, if a bad csum is discovered, the skb is unlinked from the queue with __sk_queue_drop_skb and the peek operation restarted. __sk_queue_drop_skb only drops packets that match the queue head. This fails if the skb was found after the head, using SO_PEEK_OFF socket option. This causes an infinite loop. We MUST drop this problematic skb, and we can simply check if skb was already removed by another thread, by looking at skb->next : This pointer is set to NULL by the __skb_unlink() operation, that might have happened only under the spinlock protection. Many thanks to syzkaller team (and particularly Dmitry Vyukov who provided us nice C reproducers exhibiting the lockup) and Willem de Bruijn who provided first version for this patch and a test program. Fixes: 627d2d6b5500 ("udp: enable MSG_PEEK at non-zero offset") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20macsec: add genl family module aliasSabrina Dubroca
[ Upstream commit 78362998f58c7c271e2719dcd0aaced435c801f9 ] This helps tools such as wpa_supplicant can start even if the macsec module isn't loaded yet. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20ipv6: fix sparse warning on rt6i_nodeWei Wang
[ Upstream commit 4e587ea71bf924f7dac621f1351653bd41e446cb ] Commit c5cff8561d2d adds rcu grace period before freeing fib6_node. This generates a new sparse warning on rt->rt6i_node related code: net/ipv6/route.c:1394:30: error: incompatible types in comparison expression (different address spaces) ./include/net/ip6_fib.h:187:14: error: incompatible types in comparison expression (different address spaces) This commit adds "__rcu" tag for rt6i_node and makes sure corresponding rcu API is used for it. After this fix, sparse no longer generates the above warning. Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20ipv6: add rcu grace period before freeing fib6_nodeWei Wang
[ Upstream commit c5cff8561d2d0006e972bd114afd51f082fee77c ] We currently keep rt->rt6i_node pointing to the fib6_node for the route. And some functions make use of this pointer to dereference the fib6_node from rt structure, e.g. rt6_check(). However, as there is neither refcount nor rcu taken when dereferencing rt->rt6i_node, it could potentially cause crashes as rt->rt6i_node could be set to NULL by other CPUs when doing a route deletion. This patch introduces an rcu grace period before freeing fib6_node and makes sure the functions that dereference it takes rcu_read_lock(). Note: there is no "Fixes" tag because this bug was there in a very early stage. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20ipv6: accept 64k - 1 packet length in ip6_find_1stfragopt()Stefano Brivio
[ Upstream commit 3de33e1ba0506723ab25734e098cf280ecc34756 ] A packet length of exactly IPV6_MAXPLEN is allowed, we should refuse parsing options only if the size is 64KiB or more. While at it, remove one extra variable and one assignment which were also introduced by the commit that introduced the size check. Checking the sum 'offset + len' and only later adding 'len' to 'offset' doesn't provide any advantage over directly summing to 'offset' and checking it. Fixes: 6399f1fae4ec ("ipv6: avoid overflow of offset in ip6_find_1stfragopt") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13Linux 4.9.50v4.9.50Greg Kroah-Hartman
2017-09-13xfs: XFS_IS_REALTIME_INODE() should be false if no rt device presentRichard Wareing
commit b31ff3cdf540110da4572e3e29bd172087af65cc upstream. If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on a directory in a filesystem that does not have a realtime device and create a new file in that directory, it gets marked as a real time file. When data is written and a fsync is issued, the filesystem attempts to flush a non-existent rt device during the fsync process. This results in a crash dereferencing a null buftarg pointer in xfs_blkdev_issue_flush(): BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xfs_blkdev_issue_flush+0xd/0x20 ..... Call Trace: xfs_file_fsync+0x188/0x1c0 vfs_fsync_range+0x3b/0xa0 do_fsync+0x3d/0x70 SyS_fsync+0x10/0x20 do_syscall_64+0x4d/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 Setting RT inode flags does not require special privileges so any unprivileged user can cause this oops to occur. To reproduce, confirm kernel is compiled with CONFIG_XFS_RT=y and run: # mkfs.xfs -f /dev/pmem0 # mount /dev/pmem0 /mnt/test # mkdir /mnt/test/foo # xfs_io -c 'chattr +t' /mnt/test/foo # xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait. Kernels built with CONFIG_XFS_RT=n are not exposed to this bug. Fixes: f538d4da8d52 ("[XFS] write barrier support") Signed-off-by: Richard Wareing <rwareing@fb.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13NFS: Sync the correct byte range during synchronous writestarangg@amazon.com
commit e973b1a5999e57da677ab50da5f5479fdc0f0c31 upstream. Since commit 18290650b1c8 ("NFS: Move buffered I/O locking into nfs_file_write()") nfs_file_write() has not flushed the correct byte range during synchronous writes. generic_write_sync() expects that iocb->ki_pos points to the right edge of the range rather than the left edge. To replicate the problem, open a file with O_DSYNC, have the client write at increasing offsets, and then print the successful offsets. Block port 2049 partway through that sequence, and observe that the client application indicates successful writes in advance of what the server received. Fixes: 18290650b1c8 ("NFS: Move buffered I/O locking into nfs_file_write()") Signed-off-by: Jacob Strauss <jsstraus@amazon.com> Signed-off-by: Tarang Gupta <tarangg@amazon.com> Tested-by: Tarang Gupta <tarangg@amazon.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13NFS: Fix 2 use after free issues in the I/O codeTrond Myklebust
commit 196639ebbe63a037fe9a80669140bd292d8bcd80 upstream. The writeback code wants to send a commit after processing the pages, which is why we want to delay releasing the struct path until after that's done. Also, the layout code expects that we do not free the inode before we've put the layout segments in pnfs_writehdr_free() and pnfs_readhdr_free() Fixes: 919e3bd9a875 ("NFS: Ensure we commit after writeback is complete") Fixes: 4714fb51fd03 ("nfs: remove pgio_header refcount, related cleanup") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13ARM: 8692/1: mm: abort uaccess retries upon fatal signalMark Rutland
commit 746a272e44141af24a02f6c9b0f65f4c4598ed42 upstream. When there's a fatal signal pending, arm's do_page_fault() implementation returns 0. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13ARM64: dts: marvell: armada-37xx: Fix GIC maintenance interruptMarc Zyngier
commit 95696d292e204073433ed2ef3ff4d3d8f42a8248 upstream. The GIC-500 integrated in the Armada-37xx SoCs is compliant with the GICv3 architecture, and thus provides a maintenance interrupt that is required for hypervisors to function correctly. With the interrupt provided in the DT, KVM now works as it should. Tested on an Espressobin system. Fixes: adbc3695d9e4 ("arm64: dts: add the Marvell Armada 3700 family and a development board") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13Bluetooth: Properly check L2CAP config option output buffer lengthBen Seri
commit e860d2c904d1a9f38a24eb44c9f34b8f915a6ea3 upstream. Validate the output buffer length for L2CAP config requests and responses to avoid overflowing the stack buffer used for building the option blocks. Signed-off-by: Ben Seri <ben@armis.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13ALSA: msnd: Optimize / harden DSP and MIDI loopsTakashi Iwai
commit 20e2b791796bd68816fa115f12be5320de2b8021 upstream. The ISA msnd drivers have loops fetching the ring-buffer head, tail and size values inside the loops. Such codes are inefficient and fragile. This patch optimizes it, and also adds the sanity check to avoid the endless loops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196131 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196133 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: grygorii tertychnyi <gtertych@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13locktorture: Fix potential memory leak with rw lock testYang Shi
commit f4dbba591945dc301c302672adefba9e2ec08dc5 upstream. When running locktorture module with the below commands with kmemleak enabled: $ modprobe locktorture torture_type=rw_lock_irq $ rmmod locktorture The below kmemleak got caught: root@10:~# echo scan > /sys/kernel/debug/kmemleak [ 323.197029] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) root@10:~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffffc07592d500 (size 128): comm "modprobe", pid 368, jiffies 4294924118 (age 205.824s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 c3 7b 02 00 00 00 00 00 .........{...... 00 00 00 00 00 00 00 00 d7 9b 02 00 00 00 00 00 ................ backtrace: [<ffffff80081e5a88>] create_object+0x110/0x288 [<ffffff80086c6078>] kmemleak_alloc+0x58/0xa0 [<ffffff80081d5acc>] __kmalloc+0x234/0x318 [<ffffff80006fa130>] 0xffffff80006fa130 [<ffffff8008083ae4>] do_one_initcall+0x44/0x138 [<ffffff800817e28c>] do_init_module+0x68/0x1cc [<ffffff800811c848>] load_module+0x1a68/0x22e0 [<ffffff800811d340>] SyS_finit_module+0xe0/0xf0 [<ffffff80080836f0>] el0_svc_naked+0x24/0x28 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffffffc07592d480 (size 128): comm "modprobe", pid 368, jiffies 4294924118 (age 205.824s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 3b 6f 01 00 00 00 00 00 ........;o...... 00 00 00 00 00 00 00 00 23 6a 01 00 00 00 00 00 ........#j...... backtrace: [<ffffff80081e5a88>] create_object+0x110/0x288 [<ffffff80086c6078>] kmemleak_alloc+0x58/0xa0 [<ffffff80081d5acc>] __kmalloc+0x234/0x318 [<ffffff80006fa22c>] 0xffffff80006fa22c [<ffffff8008083ae4>] do_one_initcall+0x44/0x138 [<ffffff800817e28c>] do_init_module+0x68/0x1cc [<ffffff800811c848>] load_module+0x1a68/0x22e0 [<ffffff800811d340>] SyS_finit_module+0xe0/0xf0 [<ffffff80080836f0>] el0_svc_naked+0x24/0x28 [<ffffffffffffffff>] 0xffffffffffffffff It is because cxt.lwsa and cxt.lrsa don't get freed in module_exit, so free them in lock_torture_cleanup() and free writer_tasks if reader_tasks is failed at memory allocation. Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: 石洋 <yang.s@alibaba-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13mm/memory.c: fix mem_cgroup_oom_disable() call missingLaurent Dufour
commit de0c799bba2610a8e1e9a50d76a28614520a4cd4 upstream. Seen while reading the code, in handle_mm_fault(), in the case arch_vma_access_permitted() is failing the call to mem_cgroup_oom_disable() is not made. To fix that, move the call to mem_cgroup_oom_enable() after calling arch_vma_access_permitted() as it should not have entered the memcg OOM. Link: http://lkml.kernel.org/r/1504625439-31313-1-git-send-email-ldufour@linux.vnet.ibm.com Fixes: bae473a423f6 ("mm: introduce fault_env") Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13selftests/x86/fsgsbase: Test selectors 1, 2, and 3Andy Lutomirski
commit 23d98c204386a98d9ef9f9e744f41443ece4929f upstream. Those are funny cases. Make sure they work. (Something is screwy with signal handling if a selector is 1, 2, or 3. Anyone who wants to dive into that rabbit hole is welcome to do so.) Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chang Seok <chang.seok.bae@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13btrfs: resume qgroup rescan on rw remountAleksa Sarai
commit 6c6b5a39c4bf3dbd8cf629c9f5450e983c19dbb9 upstream. Several distributions mount the "proper root" as ro during initrd and then remount it as rw before pivot_root(2). Thus, if a rescan had been aborted by a previous shutdown, the rescan would never be resumed. This issue would manifest itself as several btrfs ioctl(2)s causing the entire machine to hang when btrfs_qgroup_wait_for_completion was hit (due to the fs_info->qgroup_rescan_running flag being set but the rescan itself not being resumed). Notably, Docker's btrfs storage driver makes regular use of BTRFS_QUOTA_CTL_DISABLE and BTRFS_IOC_QUOTA_RESCAN_WAIT (causing this problem to be manifested on boot for some machines). Cc: Jeff Mahoney <jeffm@suse.com> Fixes: b382a324b60f ("Btrfs: fix qgroup rescan resume on mount") Signed-off-by: Aleksa Sarai <asarai@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13nvme-fabrics: generate spec-compliant UUID NQNsDaniel Verkamp
commit 40a5fce495715c48c2e02668144e68a507ac5a30 upstream. The default host NQN, which is generated based on the host's UUID, does not follow the UUID-based NQN format laid out in the NVMe 1.3 specification. Remove the "NVMf:" portion of the NQN to match the spec. Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13mtd: nand: qcom: fix config error for BCHAbhishek Sahu
commit 10777de570016471fd929869c7830a7772893e39 upstream. The configuration for BCH is not correct in the current driver. The ECC_CFG_ECC_DISABLE bit defines whether to enable or disable the BCH ECC in which 0x1 : BCH_DISABLED 0x0 : BCH_ENABLED But currently host->bch_enabled is being assigned to BCH_DISABLED. Fixes: c76b78d8ec05a ("mtd: nand: Qualcomm NAND controller driver") Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13mtd: nand: qcom: fix read failure without complete bootchainAbhishek Sahu
commit d8a9b320a26c1ea28e51e4f3ecfb593d5aac2910 upstream. The NAND page read fails without complete boot chain since NAND_DEV_CMD_VLD value is not proper. The default power on reset value for this register is 0xe - ERASE_START_VALID | WRITE_START_VALID | READ_STOP_VALID The READ_START_VALID should be enabled for sending PAGE_READ command. READ_STOP_VALID should be cleared since normal NAND page read does not require READ_STOP command. Fixes: c76b78d8ec05a ("mtd: nand: Qualcomm NAND controller driver") Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13mtd: nand: mxc: Fix mxc_v1 ooblayoutBoris Brezillon
commit 3bff08dffe3115a25ce04b95ea75f6d868572c60 upstream. Commit a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") introduced a bug in the OOB layout description. Even if the driver claims that 3 ECC bytes are reserved to protect 512 bytes of data, it's actually 5 ECC bytes to protect 512+6 bytes of data (some OOB bytes are also protected using extra ECC bytes). Fix the mxc_v1_ooblayout_{free,ecc}() functions to reflect this behavior. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-10Linux 4.9.49v4.9.49Greg Kroah-Hartman
2017-09-09drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()John Stultz
commit 6d5104c5a6b56385426e15047050584794bb6254 upstream. In chasing down a previous issue with EDID probing from calling drm_helper_hpd_irq_event() from irq context, Laurent noticed that the DRM documentation suggests that drm_kms_helper_hotplug_event() should be used instead. Thus this patch replaces drm_helper_hpd_irq_event() with drm_kms_helper_hotplug_event(), which requires we update the connector.status entry and only call _hotplug_event() when the status changes. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq ↵John Stultz
context commit 518cb7057a59b9441336d2e88a396d52b6ab0cce upstream. I was recently seeing issues with EDID probing, where the logic to wait for the EDID read bit to be set by the IRQ wasn't happening and the code would time out and fail. Digging deeper, I found this was due to the fact that IRQs were disabled as we were running in IRQ context from the HPD signal. Thus this patch changes the logic to handle the HPD signal via a work_struct so we can be out of irq context. With this patch, the EDID probing on hotplug does not time out. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09scsi: sg: recheck MMAP_IO request length with lock heldTodd Poynor
commit 8d26f491116feaa0b16de370b6a7ba40a40fa0b4 upstream. Commit 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page array") adds needed concurrency protection for the "reserve" buffer. Some checks that are initially made outside the lock are replicated once the lock is taken to ensure the checks and resulting decisions are made using consistent state. The check that a request with flag SG_FLAG_MMAP_IO set fits in the reserve buffer also needs to be performed again under the lock to ensure the reserve buffer length compared against matches the value in effect when the request is linked to the reserve buffer. An -ENOMEM should be returned in this case, instead of switching over to an indirect buffer as for non-MMAP_IO requests. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZETodd Poynor
commit 6a8dadcca81fceff9976e8828cceb072873b7bd5 upstream. Take f_mutex around mmap() processing to protect against races with the SG_SET_RESERVED_SIZE ioctl. Ensure the reserve buffer length remains consistent during the mapping operation, and set the "mmap called" flag to prevent further changes to the reserved buffer size as an atomic operation with the mapping. [mkp: fixed whitespace] Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09cs5536: add support for IDE controller variantAndrey Korolyov
commit 591b6bb605785c12a21e8b07a08a277065b655a5 upstream. Several legacy devices such as Geode-based Cisco ASA appliances and DB800 development board do possess CS5536 IDE controller with different PCI id than existing one. Using pata_generic is not always feasible as at least DB800 requires MSR quirk from pata_cs5536 to be used with vendor firmware. Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09workqueue: Fix flag collisionBen Hutchings
commit fbf1c41fc0f4d3574ac2377245efd666c1fa3075 upstream. Commit 0a94efb5acbb ("workqueue: implicit ordered attribute should be overridable") introduced a __WQ_ORDERED_EXPLICIT flag but gave it the same value as __WQ_LEGACY. I don't believe these were intended to mean the same thing, so renumber __WQ_ORDERED_EXPLICIT. Fixes: 0a94efb5acbb ("workqueue: implicit ordered attribute should be ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09drm/nouveau/pci/msi: disable MSI on big-endian platforms by defaultIlia Mirkin
commit bc60c90f472b6e762ea96ef384072145adc8d4af upstream. It appears that MSI does not work on either G5 PPC nor on a E5500-based platform, where other hardware is reported to work fine with MSI. Both tests were conducted with NV4x hardware, so perhaps other (or even this) hardware can be made to work. It's still possible to force-enable with config=NvMSI=1 on load. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangsChristian Borntraeger
commit fa41ba0d08de7c975c3e94d0067553f9b934221f upstream. Right now there is a potential hang situation for postcopy migrations, if the guest is enabling storage keys on the target system during the postcopy process. For storage key virtualization, we have to forbid the empty zero page as the storage key is a property of the physical page frame. As we enable storage key handling lazily we then drop all mappings for empty zero pages for lazy refaulting later on. This does not work with the postcopy migration, which relies on the empty zero page never triggering a fault again in the future. The reason is that postcopy migration will simply read a page on the target system if that page is a known zero page to fault in an empty zero page. At the same time postcopy remembers that this page was already transferred - so any future userfault on that page will NOT be retransmitted again to avoid races. If now the guest enters the storage key mode while in postcopy, we will break this assumption of postcopy. The solution is to disable the empty zero page for KVM guests early on and not during storage key enablement. With this change, the postcopy migration process is guaranteed to start after no zero pages are left. As guest pages are very likely not empty zero pages anyway the memory overhead is also pretty small. While at it this also adds proper page table locking to the zero page removal. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09MCB: add support for SC31 to mcb-lpcMichael Moese
commit acf5e051ac44d5dc60b21bc4734ef1b844d55551 upstream. This patch adds the resources and DMI ID's for the MEN SC31, which uses a different address region to map the LPC bus than the one used for the existing SC24. Signed-off-by: Michael Moese <michael.moese@men.de> [jth add stable tag] Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09mwifiex: correct channel stat buffer overflowsBrian Norris
commit 4b5dde2d6234ff5bc68e97e6901d1f2a0a7f3749 upstream. mwifiex records information about various channels as it receives scan information. It does this by appending to a buffer that was sized to the max number of supported channels on any band, but there are numerous problems: (a) scans can return info from more than one band (e.g., both 2.4 and 5 GHz), so the determined "max" is not large enough (b) some firmware appears to return multiple results for a given channel, so the max *really* isn't large enough (c) there is no bounds checking when stashing these stats, so problems (a) and (b) can easily lead to buffer overflows Let's patch this by setting a slightly-more-correct max (that accounts for a combination of both 2.4G and 5G bands) and adding a bounds check when writing to our statistics buffer. Due to problem (b), we still might not properly report all known survey information (e.g., with "iw <dev> survey dump"), since duplicate results (or otherwise "larger than expected" results) will cause some truncation. But that's a problem for a future bugfix. (And because of this known deficiency, only log the excess at the WARN level, since that isn't visible by default in this driver and would otherwise be a bit too noisy.) Fixes: bf35443314ac ("mwifiex: channel statistics support for mwifiex") Cc: Avinash Patil <patila@marvell.com> Cc: Xinming Hu <huxm@marvell.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09dlm: avoid double-free on error path in dlm_device_{register,unregister}Edwin Török
commit 55acdd926f6b21a5cdba23da98a48aedf19ac9c3 upstream. Can be reproduced when running dlm_controld (tested on 4.4.x, 4.12.4): # seq 1 100 | xargs -P0 -n1 dlm_tool join # seq 1 100 | xargs -P0 -n1 dlm_tool leave misc_register fails due to duplicate sysfs entry, which causes dlm_device_register to free ls->ls_device.name. In dlm_device_deregister the name was freed again, causing memory corruption. According to the comment in dlm_device_deregister the name should've been set to NULL when registration fails, so this patch does that. sysfs: cannot create duplicate filename '/dev/char/10:1' ------------[ cut here ]------------ warning: cpu: 1 pid: 4450 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x56/0x70 modules linked in: msr rfcomm dlm ccm bnep dm_crypt uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev btusb media btrtl btbcm btintel bluetooth ecdh_generic intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm snd_hda_codec_hdmi irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel thinkpad_acpi pcbc nvram snd_seq_midi snd_seq_midi_event aesni_intel snd_hda_codec_realtek snd_hda_codec_generic snd_rawmidi aes_x86_64 crypto_simd glue_helper snd_hda_intel snd_hda_codec cryptd intel_cstate arc4 snd_hda_core snd_seq snd_seq_device snd_hwdep iwldvm intel_rapl_perf mac80211 joydev input_leds iwlwifi serio_raw cfg80211 snd_pcm shpchp snd_timer snd mac_hid mei_me lpc_ich mei soundcore sunrpc parport_pc ppdev lp parport autofs4 i915 psmouse e1000e ahci libahci i2c_algo_bit sdhci_pci ptp drm_kms_helper sdhci pps_core syscopyarea sysfillrect sysimgblt fb_sys_fops drm wmi video cpu: 1 pid: 4450 comm: dlm_test.exe not tainted 4.12.4-041204-generic hardware name: lenovo 232425u/232425u, bios g2et82ww (2.02 ) 09/11/2012 task: ffff96b0cbabe140 task.stack: ffffb199027d0000 rip: 0010:sysfs_warn_dup+0x56/0x70 rsp: 0018:ffffb199027d3c58 eflags: 00010282 rax: 0000000000000038 rbx: ffff96b0e2c49158 rcx: 0000000000000006 rdx: 0000000000000000 rsi: 0000000000000086 rdi: ffff96b15e24dcc0 rbp: ffffb199027d3c70 r08: 0000000000000001 r09: 0000000000000721 r10: ffffb199027d3c00 r11: 0000000000000721 r12: ffffb199027d3cd1 r13: ffff96b1592088f0 r14: 0000000000000001 r15: ffffffffffffffef fs: 00007f78069c0700(0000) gs:ffff96b15e240000(0000) knlgs:0000000000000000 cs: 0010 ds: 0000 es: 0000 cr0: 0000000080050033 cr2: 000000178625ed28 cr3: 0000000091d3e000 cr4: 00000000001406e0 call trace: sysfs_do_create_link_sd.isra.2+0x9e/0xb0 sysfs_create_link+0x25/0x40 device_add+0x5a9/0x640 device_create_groups_vargs+0xe0/0xf0 device_create_with_groups+0x3f/0x60 ? snprintf+0x45/0x70 misc_register+0x140/0x180 device_write+0x6a8/0x790 [dlm] __vfs_write+0x37/0x160 ? apparmor_file_permission+0x1a/0x20 ? security_file_permission+0x3b/0xc0 vfs_write+0xb5/0x1a0 sys_write+0x55/0xc0 ? sys_fcntl+0x5d/0xb0 entry_syscall_64_fastpath+0x1e/0xa9 rip: 0033:0x7f78083454bd rsp: 002b:00007f78069bbd30 eflags: 00000293 orig_rax: 0000000000000001 rax: ffffffffffffffda rbx: 0000000000000006 rcx: 00007f78083454bd rdx: 000000000000009c rsi: 00007f78069bee00 rdi: 0000000000000005 rbp: 00007f77f8000a20 r08: 000000000000fcf0 r09: 0000000000000032 r10: 0000000000000024 r11: 0000000000000293 r12: 00007f78069bde00 r13: 00007f78069bee00 r14: 000000000000000a r15: 00007f78069bbd70 code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef e8 2c c8 ff ff 4c 89 e2 48 89 de 48 c7 c7 b0 8e 0c a8 e8 41 e8 ed ff <0f> ff 48 89 df e8 00 d5 f4 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84 ---[ end trace 40412246357cc9e0 ]--- dlm: 59f24629-ae39-44e2-9030-397ebc2eda26: leaving the lockspace group... bug: unable to handle kernel null pointer dereference at 0000000000000001 ip: [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140 pgd 0 oops: 0000 [#1] smp modules linked in: dlm 8021q garp mrp stp llc openvswitch nf_defrag_ipv6 nf_conntrack libcrc32c iptable_filter dm_multipath crc32_pclmul dm_mod aesni_intel psmouse aes_x86_64 sg ablk_helper cryptd lrw gf128mul glue_helper i2c_piix4 nls_utf8 tpm_tis tpm isofs nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc xen_wdt ip_tables x_tables autofs4 hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic pata_acpi 8139too serio_raw ata_piix 8139cp mii uhci_hcd ehci_pci ehci_hcd libata scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_mod ipv6 cpu: 0 pid: 394 comm: systemd-udevd tainted: g w 4.4.0+0 #1 hardware name: xen hvm domu, bios 4.7.2-2.2 05/11/2017 task: ffff880002410000 ti: ffff88000243c000 task.ti: ffff88000243c000 rip: e030:[<ffffffff811a3b4a>] [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140 rsp: e02b:ffff88000243fd90 eflags: 00010202 rax: 0000000000000000 rbx: ffff8800029864d0 rcx: 000000000007b36c rdx: 000000000007b36b rsi: 00000000024000c0 rdi: ffff880036801c00 rbp: ffff88000243fdc0 r08: 0000000000018880 r09: 0000000000000054 r10: 000000000000004a r11: ffff880034ace6c0 r12: 00000000024000c0 r13: ffff880036801c00 r14: 0000000000000001 r15: ffffffff8118dcc2 fs: 00007f0ab77548c0(0000) gs:ffff880036e00000(0000) knlgs:0000000000000000 cs: e033 ds: 0000 es: 0000 cr0: 0000000080050033 cr2: 0000000000000001 cr3: 000000000332d000 cr4: 0000000000040660 stack: ffffffff8118dc90 ffff8800029864d0 0000000000000000 ffff88003430b0b0 ffff880034b78320 ffff88003430b0b0 ffff88000243fdf8 ffffffff8118dcc2 ffff8800349c6700 ffff8800029864d0 000000000000000b 00007f0ab7754b90 call trace: [<ffffffff8118dc90>] ? anon_vma_fork+0x60/0x140 [<ffffffff8118dcc2>] anon_vma_fork+0x92/0x140 [<ffffffff8107033e>] copy_process+0xcae/0x1a80 [<ffffffff8107128b>] _do_fork+0x8b/0x2d0 [<ffffffff81071579>] sys_clone+0x19/0x20 [<ffffffff815a30ae>] entry_syscall_64_fastpath+0x12/0x71 ] code: f6 75 1c 4c 89 fa 44 89 e6 4c 89 ef e8 a7 e4 00 00 41 f7 c4 00 80 00 00 49 89 c6 74 47 eb 32 49 63 45 20 48 8d 4a 01 4d 8b 45 00 <49> 8b 1c 06 4c 89 f0 65 49 0f c7 08 0f 94 c0 84 c0 74 ac 49 63 rip [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140 rsp <ffff88000243fd90> cr2: 0000000000000001 --[ end trace 70cb9fd1b164a0e8 ]-- Signed-off-by: Edwin Török <edvin.torok@citrix.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09iwlwifi: pci: add new PCI ID for 7265DLuca Coelho
commit 3f7a5e13e85026b6e460bbd6e87f87379421d272 upstream. We have a new PCI subsystem ID for 7265D. Add it to the list. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09Bluetooth: Add support of 13d3:3494 RTL8723BE deviceDmitry Tunin
commit a81d72d2002d6a932bd83022cbf8c442b1b97512 upstream. T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3494 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09rtlwifi: rtl_pci_probe: Fix fail path of _rtl_pci_find_adapterMalcolm Priestley
commit fc81bab5eeb103711925d7510157cf5cd2b153f4 upstream. _rtl_pci_find_adapter fail path will jump to label fail3 for unsupported adapter types. However, on course for fail3 there will be call rtl_deinit_core before rtl_init_core. For the inclusion of checking pci_iounmap this fail can be moved to fail2. Fixes [ 4.492963] BUG: unable to handle kernel NULL pointer dereference at (null) [ 4.493067] IP: rtl_deinit_core+0x31/0x90 [rtlwifi] Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09Input: trackpoint - assume 3 buttons when buttons detection failsOscar Campos
commit 293b915fd9bebf33cdc906516fb28d54649a25ac upstream. Trackpoint buttons detection fails on ThinkPad 570 and 470 series, this makes the middle button of the trackpoint to not being recogized. As I don't believe there is any trackpoint with less than 3 buttons this patch just assumes three buttons when the extended button information read fails. Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 06:38:52 +0000