summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-03drivers/of/of_mdio.c:fix of_mdiobus_register()Dajun Jin
When registers a phy_device successful, should terminate the loop or the phy_device would be registered in other addr. If there are multiple PHYs without reg properties, it will go wrong. Signed-off-by: Dajun Jin <adajunjin@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03cxgb4: fix checks for max queues to allocateVishal Kulkarni
Hardware can support more than 8 queues currently limited by netif_get_num_default_rss_queues(). So, rework and fix checks for max number of queues to allocate. The checks should be based on how many are actually supported by hardware, OR the number of online cpus; whichever is lower. Fixes: 5952dde72307 ("cxgb4: set maximal number of default RSS queues") Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>" Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03phylink: Improve error message when validate failedHauke Mehrtens
This should improve the error message when the PHY validate in the MAC driver failed. I ran into this problem multiple times that I put wrong interface values into the device tree and was searching why it is failing with -22 (-EINVAL). This should make it easier to spot the problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: phy: bcm63xx: fix OOPS due to missing driver nameJonas Gorski
719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") was a bit over-eager and also removed the second phy driver's name, resulting in a nasty OOPS on registration: [ 1.319854] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804dd50c, ra == 804dd4f0 [ 1.330859] Oops[#1]: [ 1.333138] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.22 #0 [ 1.339217] $ 0 : 00000000 00000001 87ca7f00 805c1874 [ 1.344590] $ 4 : 00000000 00000047 00585000 8701f800 [ 1.349965] $ 8 : 8701f800 804f4a5c 00000003 64726976 [ 1.355341] $12 : 00000001 00000000 00000000 00000114 [ 1.360718] $16 : 87ca7f80 00000000 00000000 80639fe4 [ 1.366093] $20 : 00000002 00000000 806441d0 80b90000 [ 1.371470] $24 : 00000000 00000000 [ 1.376847] $28 : 87c1e000 87c1fda0 80b90000 804dd4f0 [ 1.382224] Hi : d1c8f8da [ 1.385180] Lo : 5518a480 [ 1.388182] epc : 804dd50c kset_find_obj+0x3c/0x114 [ 1.393345] ra : 804dd4f0 kset_find_obj+0x20/0x114 [ 1.398530] Status: 10008703 KERNEL EXL IE [ 1.402833] Cause : 00800008 (ExcCode 02) [ 1.406952] BadVA : 00000000 [ 1.409913] PrId : 0002a075 (Broadcom BMIPS4350) [ 1.414745] Modules linked in: [ 1.417895] Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 1.426214] Stack : 87cec000 80630000 80639370 80640658 80640000 80049af4 80639fe4 8063a0d8 [ 1.434816] 8063a0d8 802ef078 00000002 00000000 806441d0 80b90000 8063a0d8 802ef114 [ 1.443417] 87cea0de 87c1fde0 00000000 804de488 87cea000 8063a0d8 8063a0d8 80334e48 [ 1.452018] 80640000 8063984c 80639bf4 00000000 8065de48 00000001 8063a0d8 80334ed0 [ 1.460620] 806441d0 80b90000 80b90000 802ef164 8065dd70 80620000 80b90000 8065de58 [ 1.469222] ... [ 1.471734] Call Trace: [ 1.474255] [<804dd50c>] kset_find_obj+0x3c/0x114 [ 1.479141] [<802ef078>] driver_find+0x1c/0x44 [ 1.483665] [<802ef114>] driver_register+0x74/0x148 [ 1.488719] [<80334e48>] phy_driver_register+0x9c/0xd0 [ 1.493968] [<80334ed0>] phy_drivers_register+0x54/0xe8 [ 1.499345] [<8001061c>] do_one_initcall+0x7c/0x1f4 [ 1.504374] [<80644ed8>] kernel_init_freeable+0x1d4/0x2b4 [ 1.509940] [<804f4e24>] kernel_init+0x10/0xf8 [ 1.514502] [<80018e68>] ret_from_kernel_thread+0x14/0x1c [ 1.520040] Code: 1060000c 02202025 90650000 <90810000> 24630001 14250004 24840001 14a0fffb 90650000 [ 1.530061] [ 1.531698] ---[ end trace d52f1717cd29bdc8 ]--- Fix it by readding the name. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03devlink: remove trigger command from devlink-region.rstJacob Keller
The devlink trigger command does not exist. While rewriting the documentation for devlink into the reStructuredText format, documentation for the trigger command was accidentally merged in. This occurred because the author was also working on a potential extension to devlink regions which included this trigger command, and accidentally squashed the documentation incorrectly. Further review eventually settled on using the previously unused "new" command instead of creating a new trigger command. Fix this by removing mention of the trigger command from the documentation. Fixes: 0b0f945f5458 ("devlink: add a file documenting devlink regions", 2020-01-10) Noticed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04netfilter: nft_tunnel: add missing attribute validation for tunnelsJakub Kicinski
Add missing attribute validation for tunnel source and destination ports to the netlink policy. Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-04netfilter: nft_payload: add missing attribute validation for payload csum flagsJakub Kicinski
Add missing attribute validation for NFTA_PAYLOAD_CSUM_FLAGS to the netlink policy. Fixes: 1814096980bb ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-04netfilter: cthelper: add missing attribute validation for cthelperJakub Kicinski
Add missing attribute validation for cthelper to the netlink policy. Fixes: 12f7a505331e ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-04netfilter: nf_tables: free flowtable hooks on hook register errorFlorian Westphal
If hook registration fails, the hooks allocated via nft_netdev_hook_alloc need to be freed. We can't change the goto label to 'goto 5' -- while it does fix the memleak it does cause a warning splat from the netfilter core (the hooks were not registered). Fixes: 3f0465a9ef02 ("netfilter: nf_tables: dynamically allocate hooks per net_device in flowtables") Reported-by: syzbot+a2ff6fa45162a5ed4dd3@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-04netfilter: x_tables: xt_mttg_seq_next should increase position indexVasily Averin
If .next function does not change position index, following .show function will repeat output related to current position index. Without patch: # dd if=/proc/net/ip_tables_matches # original file output conntrack conntrack conntrack recent recent icmp udplite udp tcp 0+1 records in 0+1 records out 65 bytes copied, 5.4074e-05 s, 1.2 MB/s # dd if=/proc/net/ip_tables_matches bs=62 skip=1 dd: /proc/net/ip_tables_matches: cannot skip to specified offset cp <<< end of last line tcp <<< and then unexpected whole last line once again 0+1 records in 0+1 records out 7 bytes copied, 0.000102447 s, 68.3 kB/s Cc: stable@vger.kernel.org Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-04netfilter: xt_recent: recent_seq_next should increase position indexVasily Averin
If .next function does not change position index, following .show function will repeat output related to current position index. Without the patch: # dd if=/proc/net/xt_recent/SSH # original file outpt src=127.0.0.4 ttl: 0 last_seen: 6275444819 oldest_pkt: 1 6275444819 src=127.0.0.2 ttl: 0 last_seen: 6275438906 oldest_pkt: 1 6275438906 src=127.0.0.3 ttl: 0 last_seen: 6275441953 oldest_pkt: 1 6275441953 0+1 records in 0+1 records out 204 bytes copied, 6.1332e-05 s, 3.3 MB/s Read after lseek into middle of last line (offset 140 in example below) generates expected end of last line and then unexpected whole last line once again # dd if=/proc/net/xt_recent/SSH bs=140 skip=1 dd: /proc/net/xt_recent/SSH: cannot skip to specified offset 127.0.0.3 ttl: 0 last_seen: 6275441953 oldest_pkt: 1 6275441953 src=127.0.0.3 ttl: 0 last_seen: 6275441953 oldest_pkt: 1 6275441953 0+1 records in 0+1 records out 132 bytes copied, 6.2487e-05 s, 2.1 MB/s Cc: stable@vger.kernel.org Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-04netfilter: synproxy: synproxy_cpu_seq_next should increase position indexVasily Averin
If .next function does not change position index, following .show function will repeat output related to current position index. Cc: stable@vger.kernel.org Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-04netfilter: nf_conntrack: ct_cpu_seq_next should increase position indexVasily Averin
If .next function does not change position index, following .show function will repeat output related to current position index. Cc: stable@vger.kernel.org Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-03Merge tag 'socfpga_dts_fix_for_v5.6_v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm64: dts: agilex: fix gmac compatible - The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10" * tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits) arm64: dts: socfpga: agilex: Fix gmac compatible Linux 5.6-rc4 KVM: VMX: check descriptor table exits on instruction emulation ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() macintosh: therm_windtunnel: fix regression when instantiating devices jbd2: fix data races at struct journal_head kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter MAINTAINERS: Correct Cadence PCI driver path io_uring: fix 32-bit compatability with sendmsg/recvmsg net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() ... Link: https://lore.kernel.org/r/20200303153509.28248-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-03docs: networking: net_failover: Fix a few typosJonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: dsa: fix phylink_start()/phylink_stop() callsRussell King
Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03Merge tag '5.6-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Five small cifs/smb3 fixes, two for stable (one for a reconnect problem and the other fixes a use case when renaming an open file)" * tag '5.6-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Use #define in cifs_dbg cifs: fix rename() by ensuring source handle opened with DELETE bit cifs: add missing mount option to /proc/mounts cifs: fix potential mismatch of UNC paths cifs: don't leak -EAGAIN for stat() during reconnect
2020-03-03Merge branch 'Fix-IPv6-peer-route-update'David S. Miller
Hangbin Liu says: ==================== Fix IPv6 peer route update Currently we have two issues for peer route update on IPv6. 1. When update peer route metric, we only updated the local one. 2. If peer address changed, we didn't remove the old one and add new one. The first two patches fixed these issues and the third patch add new tests to cover it. With the fixes and updated test: ]# ./fib_tests.sh IPv6 prefix route tests TEST: Default metric [ OK ] TEST: User specified metric on first device [ OK ] TEST: User specified metric on second device [ OK ] TEST: Delete of address on first device [ OK ] TEST: Modify metric of address [ OK ] TEST: Prefix route removed on link down [ OK ] TEST: Prefix route with metric on link up [ OK ] TEST: Set metric with peer route on local side [ OK ] TEST: User specified metric on local address [ OK ] TEST: Set metric with peer route on peer side [ OK ] TEST: Modify metric with peer route on local side [ OK ] TEST: Modify metric with peer route on peer side [ OK ] IPv4 prefix route tests TEST: Default metric [ OK ] TEST: User specified metric on first device [ OK ] TEST: User specified metric on second device [ OK ] TEST: Delete of address on first device [ OK ] TEST: Modify metric of address [ OK ] TEST: Prefix route removed on link down [ OK ] TEST: Prefix route with metric on link up [ OK ] TEST: Modify metric of .0/24 address [ OK ] TEST: Set metric of address with peer route [ OK ] TEST: Modify metric of address with peer route [ OK ] Tests passed: 22 Tests failed: 0 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03selftests/net/fib_tests: update addr_metric_test for peer route testingHangbin Liu
This patch update {ipv4, ipv6}_addr_metric_test with 1. Set metric of address with peer route and see if the route added correctly. 2. Modify metric and peer address for peer route and see if the route changed correctly. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/ipv6: remove the old peer route if change it to a new oneHangbin Liu
When we modify the peer route and changed it to a new one, we should remove the old route first. Before the fix: + ip addr add dev dummy1 2001:db8::1 peer 2001:db8::2 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 256 pref medium 2001:db8::2 proto kernel metric 256 pref medium + ip addr change dev dummy1 2001:db8::1 peer 2001:db8::3 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 256 pref medium 2001:db8::2 proto kernel metric 256 pref medium After the fix: + ip addr change dev dummy1 2001:db8::1 peer 2001:db8::3 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 256 pref medium 2001:db8::3 proto kernel metric 256 pref medium This patch depend on the previous patch "net/ipv6: need update peer route when modify metric" to update new peer route after delete old one. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/ipv6: need update peer route when modify metricHangbin Liu
When we modify the route metric, the peer address's route need also be updated. Before the fix: + ip addr add dev dummy1 2001:db8::1 peer 2001:db8::2 metric 60 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 60 pref medium 2001:db8::2 proto kernel metric 60 pref medium + ip addr change dev dummy1 2001:db8::1 peer 2001:db8::2 metric 61 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 61 pref medium 2001:db8::2 proto kernel metric 60 pref medium After the fix: + ip addr change dev dummy1 2001:db8::1 peer 2001:db8::2 metric 61 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 61 pref medium 2001:db8::2 proto kernel metric 61 pref medium Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03dt-bindings: mfd: Fix typo in file name of twl-familly.txtJonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03dt-bindings: mfd: tps65910: Improve grammarJonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad")Jonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03drm/sun4i: Fix DE2 VI layer format supportJernej Skrabec
DE2 VI layer doesn't support blending which means alpha channel is ignored. Replace all formats with alpha with "don't care" (X) channel. Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-4-jernej.skrabec@siol.net
2020-03-03drm/sun4i: Add separate DE3 VI layer formatsJernej Skrabec
DE3 VI layers support alpha blending, but DE2 VI layers do not. Additionally, DE3 VI layers support 10-bit RGB and YUV formats. Make a separate list for DE3. Fixes: c50519e6db4d ("drm/sun4i: Add basic support for DE3") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-3-jernej.skrabec@siol.net
2020-03-03drm/sun4i: de2/de3: Remove unsupported VI layer formatsJernej Skrabec
YUV444 and YVU444 are planar formats, but HW format RGB888 is packed. This means that those two mappings were never correct. Remove them. Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-2-jernej.skrabec@siol.net
2020-03-03Merge branch 'net-add-missing-netlink-policies'David S. Miller
Jakub Kicinski says: ==================== net: add missing netlink policies Recent one-off fixes motivated me to do some grepping for more missing netlink attribute policies. I didn't manage to even produce a KASAN splat with these, but it should be possible with sufficient luck. All the missing policies are pretty trivial (NLA_Uxx). I've only tested the devlink patches, the rest compiles. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03nfc: add missing attribute validation for vendor subcommandJakub Kicinski
Add missing attribute validation for vendor subcommand attributes to the netlink policy. Fixes: 9e58095f9660 ("NFC: netlink: Implement vendor command support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03nfc: add missing attribute validation for deactivate targetJakub Kicinski
Add missing attribute validation for NFC_ATTR_TARGET_INDEX to the netlink policy. Fixes: 4d63adfe12dd ("NFC: Add NFC_CMD_DEACTIVATE_TARGET support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03nfc: add missing attribute validation for SE APIJakub Kicinski
Add missing attribute validation for NFC_ATTR_SE_INDEX to the netlink policy. Fixes: 5ce3f32b5264 ("NFC: netlink: SE API implementation") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03tipc: add missing attribute validation for MTU propertyJakub Kicinski
Add missing attribute validation for TIPC_NLA_PROP_MTU to the netlink policy. Fixes: 901271e0403a ("tipc: implement configuration of UDP media MTU") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03team: add missing attribute validation for array indexJakub Kicinski
Add missing attribute validation for TEAM_ATTR_OPTION_ARRAY_INDEX to the netlink policy. Fixes: b13033262d24 ("team: introduce array options") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03team: add missing attribute validation for port ifindexJakub Kicinski
Add missing attribute validation for TEAM_ATTR_OPTION_PORT_IFINDEX to the netlink policy. Fixes: 80f7c6683fe0 ("team: add support for per-port options") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: taprio: add missing attribute validation for txtime delayJakub Kicinski
Add missing attribute validation for TCA_TAPRIO_ATTR_TXTIME_DELAY to the netlink policy. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: fq: add missing attribute validation for orphan maskJakub Kicinski
Add missing attribute validation for TCA_FQ_ORPHAN_MASK to the netlink policy. Fixes: 06eb395fa985 ("pkt_sched: fq: better control of DDOS traffic") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03openvswitch: add missing attribute validation for hashJakub Kicinski
Add missing attribute validation for OVS_PACKET_ATTR_HASH to the netlink policy. Fixes: bd1903b7c459 ("net: openvswitch: add hash info to upcall") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03macsec: add missing attribute validation for portJakub Kicinski
Add missing attribute validation for IFLA_MACSEC_PORT to the netlink policy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03can: add missing attribute validation for terminationJakub Kicinski
Add missing attribute validation for IFLA_CAN_TERMINATION to the netlink policy. Fixes: 12a6075cabc0 ("can: dev: add CAN interface termination API") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03nl802154: add missing attribute validation for dev_typeJakub Kicinski
Add missing attribute type validation for IEEE802154_ATTR_DEV_TYPE to the netlink policy. Fixes: 90c049b2c6ae ("ieee802154: interface type to be added") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03nl802154: add missing attribute validationJakub Kicinski
Add missing attribute validation for several u8 types. Fixes: 2c21d11518b6 ("net: add NL802154 interface for configuration of 802.15.4 devices") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03fib: add missing attribute validation for tun_idJakub Kicinski
Add missing netlink policy entry for FRA_TUN_ID. Fixes: e7030878fc84 ("fib: Add fib rule match on tunnel id") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03devlink: validate length of region addr/lenJakub Kicinski
DEVLINK_ATTR_REGION_CHUNK_ADDR and DEVLINK_ATTR_REGION_CHUNK_LEN lack entries in the netlink policy. Corresponding nla_get_u64()s may read beyond the end of the message. Fixes: 4e54795a27f5 ("devlink: Add support for region snapshot read command") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03devlink: validate length of param valuesJakub Kicinski
DEVLINK_ATTR_PARAM_VALUE_DATA may have different types so it's not checked by the normal netlink policy. Make sure the attribute length is what we expect. Fixes: e3b7ca18ad7b ("devlink: Add param set command") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()Dan Carpenter
This is only called from adt7462_update_device(). The caller expects it to return zero on error. I fixed a similar issue earlier in commit a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0") but I missed this one. Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20200303101608.kqjwfcazu2ylhi2a@kili.mountain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-03-03binder: prevent UAF for binderfs devices IIChristian Brauner
This is a necessary follow up to the first fix I proposed and we merged in 2669b8b0c79 ("binder: prevent UAF for binderfs devices"). I have been overly optimistic that the simple fix I proposed would work. But alas, ihold() + iput() won't work since the inodes won't survive the destruction of the superblock. So all we get with my prior fix is a different race with a tinier race-window but it doesn't solve the issue. Fwiw, the problem lies with generic_shutdown_super(). It even has this cozy Al-style comment: if (!list_empty(&sb->s_inodes)) { printk("VFS: Busy inodes after unmount of %s. " "Self-destruct in 5 seconds. Have a nice day...\n", sb->s_id); } On binder_release(), binder_defer_work(proc, BINDER_DEFERRED_RELEASE) is called which punts the actual cleanup operation to a workqueue. At some point, binder_deferred_func() will be called which will end up calling binder_deferred_release() which will retrieve and cleanup the binder_context attach to this struct binder_proc. If we trace back where this binder_context is attached to binder_proc we see that it is set in binder_open() and is taken from the struct binder_device it is associated with. This obviously assumes that the struct binder_device that context is attached to is _never_ freed. While that might be true for devtmpfs binder devices it is most certainly wrong for binderfs binder devices. So, assume binder_open() is called on a binderfs binder devices. We now stash away the struct binder_context associated with that struct binder_devices: proc->context = &binder_dev->context; /* binderfs stashes devices in i_private */ if (is_binderfs_device(nodp)) { binder_dev = nodp->i_private; info = nodp->i_sb->s_fs_info; binder_binderfs_dir_entry_proc = info->proc_log_dir; } else { . . . proc->context = &binder_dev->context; Now let's assume that the binderfs instance for that binder devices is shutdown via umount() and/or the mount namespace associated with it goes away. As long as there is still an fd open for that binderfs binder device things are fine. But let's assume we now close the last fd for that binderfs binder device. Now binder_release() is called and punts to the workqueue. Assume that the workqueue has quite a bit of stuff to do and doesn't get to cleaning up the struct binder_proc and the associated struct binder_context with it for that binderfs binder device right away. In the meantime, the VFS is killing the super block and is ultimately calling sb->evict_inode() which means it will call binderfs_evict_inode() which does: static void binderfs_evict_inode(struct inode *inode) { struct binder_device *device = inode->i_private; struct binderfs_info *info = BINDERFS_I(inode); clear_inode(inode); if (!S_ISCHR(inode->i_mode) || !device) return; mutex_lock(&binderfs_minors_mutex); --info->device_count; ida_free(&binderfs_minors, device->miscdev.minor); mutex_unlock(&binderfs_minors_mutex); kfree(device->context.name); kfree(device); } thereby freeing the struct binder_device including struct binder_context. Now the workqueue finally has time to get around to cleaning up struct binder_proc and is now trying to access the associate struct binder_context. Since it's already freed it will OOPs. Fix this by introducing a refounct on binder devices. This is an alternative fix to 51d8a7eca677 ("binder: prevent UAF read in print_binder_transaction_log_entry()"). Fixes: 3ad20fe393b3 ("binder: implement binderfs") Fixes: 2669b8b0c798 ("binder: prevent UAF for binderfs devices") Fixes: 03e2e07e3814 ("binder: Make transaction_log available in binderfs") Related : 51d8a7eca677 ("binder: prevent UAF read in print_binder_transaction_log_entry()") Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20200303164340.670054-1-christian.brauner@ubuntu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-03riscv: Change code model of module to medany to improve data accessingVincent Chen
All the loaded module locates in the region [＆_end-2G，VMALLOC_END] at runtime, so the distance from the module start to the end of the kernel image does not exceed 2GB. Hence, the code model of the kernel module can be changed to medany to improve the performance data access. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03riscv: avoid the PIC offset of static percpu data in module beyond 2G limitsVincent Chen
The compiler uses the PIC-relative method to access static variables instead of GOT when the code model is PIC. Therefore, the limitation of the access range from the instruction to the symbol address is +-2GB. Under this circumstance, the kernel cannot load a kernel module if this module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason is that kernel relocates the .data..percpu section of the kernel module to the end of kernel's .data..percpu. Hence, the distance between the per-CPU symbols and the instruction will exceed the 2GB limits. To solve this problem, the kernel should place the loaded module in the memory area [&_end-2G, VMALLOC_END]. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Suggested-by: Alexandre Ghiti <alex@ghiti.fr> Suggested-by: Anup Patel <anup@brainfault.org> Tested-by: Alexandre Ghiti <alex@ghiti.fr> Tested-by: Carlos de Paula <me@carlosedp.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03dm: bump version of core and various targetsMike Snitzer
Changes made during the 5.6 cycle warrant bumping the version number for DM core and the targets modified by this commit. It should be noted that dm-thin, dm-crypt and dm-raid already had their target version bumped during the 5.6 merge window. Signed-off-by; Mike Snitzer <snitzer@redhat.com>
2020-03-03dm: fix congested_fn for request-based deviceHou Tao
We neither assign congested_fn for requested-based blk-mq device nor implement it correctly. So fix both. Also, remove incorrect comment from dm_init_normal_md_queue and rename it to dm_init_congested_fn. Fixes: 4aa9c692e052 ("bdi: separate out congested state into a separate struct") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 06:31:10 +0000