summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-18l2tp: prevent lockdep issue in l2tp_tunnel_register()Eric Dumazet
lockdep complains with the following lock/unlock sequence: lock_sock(sk); write_lock_bh(&sk->sk_callback_lock); [1] release_sock(sk); [2] write_unlock_bh(&sk->sk_callback_lock); We need to swap [1] and [2] to fix this issue. Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()") Reported-by: syzbot+bbd35b345c7cab0d9a08@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/netdev/20230114030137.672706-1-xiyou.wangcong@gmail.com/T/#m1164ff20628671b0f326a24cb106ab3239c70ce3 Cc: Cong Wang <cong.wang@bytedance.com> Cc: Guillaume Nault <gnault@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRUMario Limonciello
commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") changed the policy such that I2C touchpads may be able to wake up the system by default if the system is configured as such. However on Clevo NL5xRU there is a mistake in the ACPI tables that the TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level triggered but connected to a pull up. As soon as the system suspends the touchpad loses power and then the system wakes up. To avoid this problem, introduce a quirk for this model that will prevent the wakeup capability for being set for GPIO 9. Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") Reported-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627 Co-developed-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-18gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEIMario Limonciello
Using the `ignore_wake` quirk or module parameter doesn't work for any pin that has been specified in the _CRS instead of _AEI. Extend the `acpi_gpio_irq_is_wake` check to cover both places. Suggested-by: Raul Rangel <rrangel@chromium.org> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1722335 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-18virtio-net: correctly enable callback during start_xmitJason Wang
Commit a7766ef18b33("virtio_net: disable cb aggressively") enables virtqueue callback via the following statement: do { if (use_napi) virtqueue_disable_cb(sq->vq); free_old_xmit_skbs(sq, false); } while (use_napi && kick && unlikely(!virtqueue_enable_cb_delayed(sq->vq))); When NAPI is used and kick is false, the callback won't be enabled here. And when the virtqueue is about to be full, the tx will be disabled, but we still don't enable tx interrupt which will cause a TX hang. This could be observed when using pktgen with burst enabled. TO be consistent with the logic that tries to disable cb only for NAPI, fixing this by trying to enable delayed callback only when NAPI is enabled when the queue is about to be full. Fixes: a7766ef18b33 ("virtio_net: disable cb aggressively") Signed-off-by: Jason Wang <jasowang@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18net: macb: fix PTP TX timestamp failure due to packet paddingRobert Hancock
PTP TX timestamp handling was observed to be broken with this driver when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving the expected TX timestamp after transmitting a packet, causing it to enter a failure state. The problem appears to be due to the way that the driver pads packets which are smaller than the Ethernet minimum of 60 bytes. If headroom space was available in the SKB, this caused the driver to move the data back to utilize it. However, this appears to cause other data references in the SKB to become inconsistent. In particular, this caused the ptp_one_step_sync function to later (in the TX completion path) falsely detect the packet as a one-step SYNC packet, even when it was not, which caused the TX timestamp to not be processed when it should be. Using the headroom for this purpose seems like an unnecessary complexity as this is not a hot path in the driver, and in most cases it appears that there is sufficient tailroom to not require using the headroom anyway. Remove this usage of headroom to prevent this inconsistency from occurring and causing other problems. Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5 Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18perf test build-id: Fix test check for PE fileAthira Rajeev
Perf test "build id cache operations" fails for PE executable. Logs below from powerpc system. Same is observed on x86 as well. <<>> Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok build id: 5a0fd882b53084224ba47b624c55a469 link: /tmp/perf.debug.w0V/.build-id/5a/0fd882b53084224ba47b624c55a469 file: /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf failed: file /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist test child finished with -1 ---- end ---- build id cache operations: FAILED! <<>> The test tries to do: <<>> mkdir /tmp/perf.debug.TeY1 perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a ./tests/shell/../pe-file.exe <<>> The option "--buildid-dir" sets the build id cache directory as /tmp/perf.debug.TeY1. The option given to buildid-cahe, ie "-a ./tests/shell/../pe-file.exe", is to add the pe-file.exe to the cache. The testcase, sets buildid-dir and adds the file: pe-file.exe to build id cache. To check if the command is run successfully, "check" function looks for presence of the file in buildid cache directory. But the check here expects the added file to be executable. Snippet below: <<>> if [ ! -x $file ]; then echo "failed: file ${file} does not exist" exit 1 fi <<>> The buildid test is done for sha1 binary, md5 binary and also for PE file. The first two binaries are created at runtime by compiling with "--build-id" option and hence the check for sha1/md5 test should use [ ! -x ]. But in case of PE file, the permission for this input file is rw-r--r-- Hence the file added to build id cache has same permissoin Original file: ls tests/pe-file.exe | xargs stat --printf "%n %A \n" tests/pe-file.exe -rw-r--r-- buildid cache file: ls /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf | xargs stat --printf "%n %A \n" /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf -rw-r--r-- Fix the test to match with the permission of original file in case of FE file. ie if the "tests/pe-file.exe" file is not having exec permission, just check for existence of the buildid file using [ ! -e <file> ] Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230116050131.17221-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller
Pablo Niera Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Fix syn-retransmits until initiator gives up when connection is re-used due to rst marked as invalid, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-18perf buildid-cache: Fix the file mode with copyfile() while adding file to ↵Athira Rajeev
build-id cache The test "build id cache operations" fails on powerpc as below: Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok build id: 5a0fd882b53084224ba47b624c55a469 link: /tmp/perf.debug.ZTu/.build-id/5a/0fd882b53084224ba47b624c55a469 file: /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf failed: file /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist test child finished with -1 ---- end ---- build id cache operations: FAILED! The failing test is when trying to add pe-file.exe to build id cache. 'perf buildid-cache' can be used to add/remove/manage files from the build-id cache. "-a" option is used to add a file to the build-id cache. Simple command to do so for a PE exe file: # ls -ltr tests/pe-file.exe -rw-r--r--. 1 root root 75595 Jan 10 23:35 tests/pe-file.exe The file is in home directory. # mkdir /tmp/perf.debug.TeY1 # perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a tests/pe-file.exe The above will create ".build-id" folder in build id directory, which is /tmp/perf.debug.TeY1. Also adds file to this folder under build id. Example: # ls -ltr /tmp/perf.debug.TeY1/.build-id/5a/0fd882b53084224ba47b624c55a469/ total 76 -rw-r--r--. 1 root root 0 Jan 11 00:38 probes -rwxr-xr-x. 1 root root 75595 Jan 11 00:38 elf We can see in the results that file mode for original file and file in build id directory is different. ie, build id file has executable permission whereas original file doesn’t have. The code path and function (build_id_cache__add to add a file to the cache is in "util/build-id.c". In build_id_cache__add() function, it first attempts to link the original file to destination cache folder. If linking the file fails (which can happen if the destination and source is on a different mount points), it will copy the file to destination. Here copyfile() routine explicitly uses mode as "755" and hence file in the destination will have executable permission. Code snippet: if (link(realname, filename) && errno != EEXIST && copyfile(name, filename)) strace logs: 172285 link("/home/<user_name>/linux/tools/perf/tests/pe-file.exe", "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf") = -1 EXDEV (Invalid cross-device link) 172285 newfstatat(AT_FDCWD, "tests/pe-file.exe", {st_mode=S_IFREG|0644, st_size=75595, ...}, 0) = 0 172285 openat(AT_FDCWD, "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/.elf.KbAnsl", O_RDWR|O_CREAT|O_EXCL, 0600) = 3 172285 fchmod(3, 0755) = 0 172285 openat(AT_FDCWD, "tests/pe-file.exe", O_RDONLY) = 4 172285 mmap(NULL, 75595, PROT_READ, MAP_PRIVATE, 4, 0) = 0x7fffa5cd0000 172285 pwrite64(3, "MZ\220\0\3\0\0\0\4\0\0\0\377\377\0\0\270\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 75595, 0) = 75595 Whereas if the link succeeds, it succeeds in the first attempt itself and the file in the build-id dir will have same permission as original file. Example, above uses /tmp. Instead if we use "--buildid-dir /home/build", linking will work here since mount points are same. Hence the destination file will not have executable permission. Since the testcase "tests/shell/buildid.sh" always looks for executable file, test fails in powerpc environment when test is run from /root. The patch adds a change in build_id_cache__add() to use copyfile_mode() which also passes the file’s original mode as argument. This way the destination file mode also will be same as original file. Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230116050131.17221-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18perf expr: Prevent normalize() from reading into undefined memory in the ↵Sohom Datta
expression lexer The current implementation does not account for a trailing backslash followed by a null-byte. If a null-byte is encountered following a backslash, normalize() will continue reading (and potentially writing) into garbage memory ignoring the EOS null-byte. Signed-off-by: Sohom Datta <sohomdatta1+git@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221204105836.1012885-1-sohomdatta1+git@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18tools headers: Syncronize linux/build_bug.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: 07a368b3f55a79d3 ("bug: introduce ASSERT_STRUCT_OFFSET") This cset only introduces a build time assert macro, that may be useful at some point for tooling, for now it silences this perf build warning: Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h' diff -u tools/include/linux/build_bug.h include/linux/build_bug.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Y8f0jqQFYDAOBkHx@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18perf beauty: Update copy of linux/socket.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: b5f0de6df6dce8d6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") That don't result in any changes in the tables generated from that header. This silences this perf build warning: Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h' diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: decb17aeb8fa2148 ("KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations") 07e39e60bbf0ccd5 ("arm64: Add Cortex-715 CPU part definition") 8ec8490a1950efec ("arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro") That addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Ali Saidi <alisaidi@amazon.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: D Scott Phillips <scott@os.amperecomputing.com> Cc: German Gomez <german.gomez@arm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/Y8fvEGCGn+227qW0@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18tools kvm headers arm64: Update KVM header from the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: 9cb1096f8590bc59 ("KVM: arm64: Enable ring-based dirty memory tracking") That doesn't result in any changes in tooling (built on a Libre Computer Firefly ROC-RK3399-PC-V1.1-A running Ubuntu 22.04), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/Y8fmIT5PIfGaZuwa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_initHui Wang
If the function sdma_load_context() fails, the sdma_desc will be freed, but the allocated desc->bd is forgot to be freed. We already met the sdma_load_context() failure case and the log as below: [ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready ... In this case, the desc->bd will not be freed without this change. Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20221130090800.102035-1-hui.wang@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18dmaengine: Fix double increment of client_count in dma_chan_get()Koba Ko
The first time dma_chan_get() is called for a channel the channel client_count is incorrectly incremented twice for public channels, first in balance_ref_count(), and again prior to returning. This results in an incorrect client count which will lead to the channel resources not being freed when they should be. A simple test of repeated module load and unload of async_tx on a Dell Power Edge R7425 also shows this resulting in a kref underflow warning. [ 124.329662] async_tx: api initialized (async) [ 129.000627] async_tx: api initialized (async) [ 130.047839] ------------[ cut here ]------------ [ 130.052472] refcount_t: underflow; use-after-free. [ 130.057279] WARNING: CPU: 3 PID: 19364 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 130.065811] Modules linked in: async_tx(-) rfkill intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd ipmi_ssif kvm_amd dcdbas kvm mgag200 drm_shmem_helper acpi_ipmi irqbypass drm_kms_helper ipmi_si syscopyarea sysfillrect rapl pcspkr ipmi_devintf sysimgblt fb_sys_fops k10temp i2c_piix4 ipmi_msghandler acpi_power_meter acpi_cpufreq vfat fat drm fuse xfs libcrc32c sd_mod t10_pi sg ahci crct10dif_pclmul libahci crc32_pclmul crc32c_intel ghash_clmulni_intel igb megaraid_sas i40e libata i2c_algo_bit ccp sp5100_tco dca dm_mirror dm_region_hash dm_log dm_mod [last unloaded: async_tx] [ 130.117361] CPU: 3 PID: 19364 Comm: modprobe Kdump: loaded Not tainted 5.14.0-185.el9.x86_64 #1 [ 130.126091] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.18.0 01/17/2022 [ 130.133806] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 130.139041] Code: 01 01 e8 6d bd 55 00 0f 0b e9 72 9d 8a 00 80 3d 26 18 9c 01 00 75 85 48 c7 c7 f8 a3 03 9d c6 05 16 18 9c 01 01 e8 4a bd 55 00 <0f> 0b e9 4f 9d 8a 00 80 3d 01 18 9c 01 00 0f 85 5e ff ff ff 48 c7 [ 130.157807] RSP: 0018:ffffbf98898afe68 EFLAGS: 00010286 [ 130.163036] RAX: 0000000000000000 RBX: ffff9da06028e598 RCX: 0000000000000000 [ 130.170172] RDX: ffff9daf9de26480 RSI: ffff9daf9de198a0 RDI: ffff9daf9de198a0 [ 130.177316] RBP: ffff9da7cddf3970 R08: 0000000000000000 R09: 00000000ffff7fff [ 130.184459] R10: ffffbf98898afd00 R11: ffffffff9d9e8c28 R12: ffff9da7cddf1970 [ 130.191596] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 130.198739] FS: 00007f646435c740(0000) GS:ffff9daf9de00000(0000) knlGS:0000000000000000 [ 130.206832] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.212586] CR2: 00007f6463b214f0 CR3: 00000008ab98c000 CR4: 00000000003506e0 [ 130.219729] Call Trace: [ 130.222192] <TASK> [ 130.224305] dma_chan_put+0x10d/0x110 [ 130.227988] dmaengine_put+0x7a/0xa0 [ 130.231575] __do_sys_delete_module.constprop.0+0x178/0x280 [ 130.237157] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [ 130.242652] do_syscall_64+0x5c/0x90 [ 130.246240] ? exc_page_fault+0x62/0x150 [ 130.250178] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 130.255243] RIP: 0033:0x7f6463a3f5ab [ 130.258830] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 [ 130.277591] RSP: 002b:00007fff22f972c8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 130.285164] RAX: ffffffffffffffda RBX: 000055b6786edd40 RCX: 00007f6463a3f5ab [ 130.292303] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6786edda8 [ 130.299443] RBP: 000055b6786edd40 R08: 0000000000000000 R09: 0000000000000000 [ 130.306584] R10: 00007f6463b9eac0 R11: 0000000000000206 R12: 000055b6786edda8 [ 130.313731] R13: 0000000000000000 R14: 000055b6786edda8 R15: 00007fff22f995f8 [ 130.320875] </TASK> [ 130.323081] ---[ end trace eff7156d56b5cf25 ]--- cat /sys/class/dma/dma0chan*/in_use would get the wrong result. 2 2 2 Fixes: d2f4f99db3e9 ("dmaengine: Rework dma_chan_get") Signed-off-by: Koba Ko <koba.ko@canonical.com> Reviewed-by: Jie Hai <haijie1@huawei.com> Test-by: Jie Hai <haijie1@huawei.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Joel Savitz <jsavitz@redhat.com> Link: https://lore.kernel.org/r/20221201030050.978595-1-koba.ko@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18dmaengine: tegra210-adma: fix global intr clearMohan Kumar
The current global interrupt clear programming register offset was not correct. Fix the programming with right offset Fixes: ded1f3db4cd6 ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips") Cc: stable@vger.kernel.org Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Link: https://lore.kernel.org/r/20230102064844.31306-1-mkumard@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18Add exception protection processing for vd in axi_chan_handle_err functionShawn.Shao
Since there is no protection for vd, a kernel panic will be triggered here in exceptional cases. You can refer to the processing of axi_chan_block_xfer_complete function The triggered kernel panic is as follows: [ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 67.848447] Mem abort info: [ 67.848449] ESR = 0x96000004 [ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.848454] SET = 0, FnV = 0 [ 67.848456] EA = 0, S1PTW = 0 [ 67.848458] Data abort info: [ 67.848460] ISV = 0, ISS = 0x00000004 [ 67.848462] CM = 0, WnR = 0 [ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000 [ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000 [ 67.848472] Internal error: Oops: 96000004 [#1] SMP [ 67.848475] Modules linked in: dmatest [ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11 [ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--) [ 67.848487] pc : axi_chan_handle_err+0xc4/0x230 [ 67.848491] lr : axi_chan_handle_err+0x30/0x230 [ 67.848493] sp : ffff0803fe55ae50 [ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200 [ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080 [ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850 [ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000 [ 67.848512] x21: 0000000000000080 x20: 0000000000002000 [ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000 [ 67.848521] x17: 0000000000000000 x16: 0000000000000000 [ 67.848525] x15: 0000000000000000 x14: 0000000000000000 [ 67.848529] x13: 0000000000000000 x12: 0000000000000040 [ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a [ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270 [ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0 [ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480 [ 67.848550] x3 : dead000000000100 x2 : dead000000000122 [ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168 [ 67.848559] Call trace: [ 67.848562] axi_chan_handle_err+0xc4/0x230 [ 67.848566] dw_axi_dma_interrupt+0xf4/0x590 [ 67.848569] __handle_irq_event_percpu+0x60/0x220 [ 67.848573] handle_irq_event+0x64/0x120 [ 67.848576] handle_fasteoi_irq+0xc4/0x220 [ 67.848580] __handle_domain_irq+0x80/0xe0 [ 67.848583] gic_handle_irq+0xc0/0x138 [ 67.848585] el1_irq+0xc8/0x180 [ 67.848588] arch_cpu_idle+0x14/0x2c [ 67.848591] default_idle_call+0x40/0x16c [ 67.848594] do_idle+0x1f0/0x250 [ 67.848597] cpu_startup_entry+0x2c/0x60 [ 67.848600] rest_init+0xc0/0xcc [ 67.848603] arch_call_rest_init+0x14/0x1c [ 67.848606] start_kernel+0x4cc/0x500 [ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1) [ 67.848613] ---[ end trace 585a97036f88203a ]--- Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230112055802.1764-1-shawn.shao@jaguarmicro.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18drm/panfrost: fix GENERIC_ATOMIC64 dependencyArnd Bergmann
On ARMv5 and earlier, a randconfig build can still run into WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE Depends on [n]: IOMMU_SUPPORT [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y]) && !GENERIC_ATOMIC64 [=y] Selected by [y]: - DRM_PANFROST [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y] && !GENERIC_ATOMIC64 [=y]) && MMU [=y] Rework the dependencies to always require a working cmpxchg64. Fixes: db594ba3fcf9 ("drm/panfrost: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230117164456.1591901-1-arnd@kernel.org
2023-01-18dmaengine: lgm: Move DT parsing after initializationPeter Harliman Liem
ldma_cfg_init() will parse DT to retrieve certain configs. However, that is called before ldma_dma_init_vXX(), which will make some initialization to channel configs. It will thus incorrectly overwrite certain configs that are declared in DT. To fix that, we move DT parsing after initialization. Function name is renamed to better represent what it does. Fixes: 32d31c79a1a4 ("dmaengine: Add Intel LGM SoC DMA support.") Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/afef6fc1ed20098b684e0d53737d69faf63c125f.1672887183.git.pliem@maxlinear.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18HID: playstation: sanity check DualSense calibration data.Roderick Colenbrander
Make sure calibration values are defined to prevent potential kernel crashes. This fixes a hypothetical issue for virtual or clone devices inspired by a similar fix for DS4. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-18HID: playstation: sanity check DualShock4 calibration data.Roderick Colenbrander
Some DualShock4 devices report invalid calibration data resulting in kernel oopses due to division by zero during report handling. The devices affected generally appear to be clone devices, which don't implement all reports properly and don't populate proper calibration data. The issue may have been seen on an official device with erased calibration reports. This patch prevents the crashes by essentially disabling calibration when invalid values are detected. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Tested-by: Alain Carlucci <alain.carlucci@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-18HID: uclogic: Add support for XP-PEN Deco 01 V2José Expósito
The XP-PEN Deco 01 V2 is a UGEE v2 device with a frame with 8 buttons. Its pen has 2 buttons, supports tilt and pressure. Add its ID in order to support the device. Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/839 Tested-by: Mark Waddoups <mwaddoups@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-18net: mlx5: eliminate anonymous module_init & module_exitRandy Dunlap
Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log. Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names. Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcall init+0x0/0x60 returned 0 after 2 usecs calling init+0x0/0x9a @ 1 initcall init+0x0/0x9a returned 0 after 74 usecs Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Eli Cohen <eli@mellanox.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18net/mlx5: E-switch, Fix switchdev mode after devlink reloadChris Mi
The cited commit removes eswitch mode none. So after devlink reload in switchdev mode, eswitch mode is not changed. But actually eswitch is disabled during devlink reload. Fix it by setting eswitch mode to legacy when disabling eswitch which is called by reload_down. Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18net/mlx5e: Protect global IPsec ASOLeon Romanovsky
ASO operations are global to whole IPsec as they share one DMA address for all operations. As such all WQE operations need to be protected with lock. In this case, it must be spinlock to allow mlx5e_ipsec_aso_query() operate in atomic context. Fixes: 1ed78fc03307 ("net/mlx5e: Update IPsec soft and hard limits") Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18net/mlx5e: Remove optimization which prevented update of ESN stateLeon Romanovsky
aso->use_cache variable introduced in commit 8c582ddfbb47 ("net/mlx5e: Handle hardware IPsec limits events") was an optimization to skip recurrent calls to mlx5e_ipsec_aso_query(). Such calls are possible when lifetime event is generated: -> mlx5e_ipsec_handle_event() -> mlx5e_ipsec_aso_query() - first call -> xfrm_state_check_expire() -> mlx5e_xfrm_update_curlft() -> mlx5e_ipsec_aso_query() - second call However, such optimization not really effective as mlx5e_ipsec_aso_query() is needed to be called for update ESN anyway, which was missed due to misplaced use_cache assignment. Fixes: cee137a63431 ("net/mlx5e: Handle ESN update events") Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18net/mlx5e: Set decap action based on attr for sampleChris Mi
Currently decap action is set based on tunnel_id. That means it is set unconditionally. But for decap, ct and sample actions, decap is done before ct. No need to decap again in sample. And the actions are set correctly when parsing. So set decap action based on attr instead of tunnel_id. Fixes: 2741f2230905 ("net/mlx5e: TC, Support sample offload action for tunneled traffic") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18net/mlx5e: QoS, Fix wrongfully setting parent_element_id on ↵Maor Dickman
MODIFY_SCHEDULING_ELEMENT According to HW spec parent_element_id field should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command. This patch remove the wrong initialization of reserved field, parent_element_id, on mlx5_qos_update_node. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENTMaor Dickman
According to HW spec element_type, element_attributes and parent_element_id fields should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command. This patch remove initialization of these fields when calling the command. Fixes: bd77bf1cb595 ("net/mlx5: Add SRIOV VF max rate configuration support") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xskAdham Faris
This validation function is relevant only for XSK cases, hence it assumes to be called only with xsk != NULL. Thus checking for invalid xsk pointer is redundant and misleads static code analyzers. This commit removes redundant xsk pointer check. This solves the following smatch warning: drivers/net/ethernet/mellanox/mlx5/core/en/params.c:481 mlx5e_mpwrq_validate_xsk() error: we previously assumed 'xsk' could be null (see line 478) Fixes: 6470d2e7e8ed ("net/mlx5e: xsk: Use KSM for unaligned XSK") Signed-off-by: Adham Faris <afaris@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18net/mlx5e: Avoid false lock dependency warning on tc_ht even moreVlad Buslov
The cited commit changed class of tc_ht internal mutex in order to avoid false lock dependency with fs_core node and flow_table hash table structures. However, hash table implementation internally also includes a workqueue task with its own lockdep map which causes similar bogus lockdep splat[0]. Fix it by also adding dedicated class for hash table workqueue work structure of tc_ht. [0]: [ 1139.672465] ====================================================== [ 1139.673552] WARNING: possible circular locking dependency detected [ 1139.674635] 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 Not tainted [ 1139.675734] ------------------------------------------------------ [ 1139.676801] modprobe/5998 is trying to acquire lock: [ 1139.677726] ffff88811e7b93b8 (&node->lock){++++}-{3:3}, at: down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.679662] but task is already holding lock: [ 1139.680703] ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0 [ 1139.682223] which lock already depends on the new lock. [ 1139.683640] the existing dependency chain (in reverse order) is: [ 1139.684887] -> #2 (&tc_ht_lock_key){+.+.}-{3:3}: [ 1139.685975] __mutex_lock+0x12c/0x14b0 [ 1139.686659] rht_deferred_worker+0x35/0x1540 [ 1139.687405] process_one_work+0x7c2/0x1310 [ 1139.688134] worker_thread+0x59d/0xec0 [ 1139.688820] kthread+0x28f/0x330 [ 1139.689444] ret_from_fork+0x1f/0x30 [ 1139.690106] -> #1 ((work_completion)(&ht->run_work)){+.+.}-{0:0}: [ 1139.691250] __flush_work+0xe8/0x900 [ 1139.691915] __cancel_work_timer+0x2ca/0x3f0 [ 1139.692655] rhashtable_free_and_destroy+0x22/0x6f0 [ 1139.693472] del_sw_flow_table+0x22/0xb0 [mlx5_core] [ 1139.694592] tree_put_node+0x24c/0x450 [mlx5_core] [ 1139.695686] tree_remove_node+0x6e/0x100 [mlx5_core] [ 1139.696803] mlx5_destroy_flow_table+0x187/0x690 [mlx5_core] [ 1139.698017] mlx5e_tc_nic_cleanup+0x2f8/0x400 [mlx5_core] [ 1139.699217] mlx5e_cleanup_nic_rx+0x2b/0x210 [mlx5_core] [ 1139.700397] mlx5e_detach_netdev+0x19d/0x2b0 [mlx5_core] [ 1139.701571] mlx5e_suspend+0xdb/0x140 [mlx5_core] [ 1139.702665] mlx5e_remove+0x89/0x190 [mlx5_core] [ 1139.703756] auxiliary_bus_remove+0x52/0x70 [ 1139.704492] device_release_driver_internal+0x3c1/0x600 [ 1139.705360] bus_remove_device+0x2a5/0x560 [ 1139.706080] device_del+0x492/0xb80 [ 1139.706724] mlx5_rescan_drivers_locked+0x194/0x6a0 [mlx5_core] [ 1139.707961] mlx5_unregister_device+0x7a/0xa0 [mlx5_core] [ 1139.709138] mlx5_uninit_one+0x5f/0x160 [mlx5_core] [ 1139.710252] remove_one+0xd1/0x160 [mlx5_core] [ 1139.711297] pci_device_remove+0x96/0x1c0 [ 1139.722721] device_release_driver_internal+0x3c1/0x600 [ 1139.723590] unbind_store+0x1b1/0x200 [ 1139.724259] kernfs_fop_write_iter+0x348/0x520 [ 1139.725019] vfs_write+0x7b2/0xbf0 [ 1139.725658] ksys_write+0xf3/0x1d0 [ 1139.726292] do_syscall_64+0x3d/0x90 [ 1139.726942] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1139.727769] -> #0 (&node->lock){++++}-{3:3}: [ 1139.728698] __lock_acquire+0x2cf5/0x62f0 [ 1139.729415] lock_acquire+0x1c1/0x540 [ 1139.730076] down_write+0x8e/0x1f0 [ 1139.730709] down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.731841] mlx5_del_flow_rules+0x6f/0x610 [mlx5_core] [ 1139.732982] __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core] [ 1139.734207] mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core] [ 1139.735491] mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core] [ 1139.736716] mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core] [ 1139.738007] mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core] [ 1139.739213] mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core] [ 1139.740377] _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core] [ 1139.741534] rhashtable_free_and_destroy+0x3be/0x6f0 [ 1139.742351] mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core] [ 1139.743512] mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core] [ 1139.744683] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] [ 1139.745860] mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core] [ 1139.747098] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] [ 1139.748372] mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core] [ 1139.749590] __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core] [ 1139.750813] mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core] [ 1139.752147] mlx5e_rep_remove+0x62/0x80 [mlx5_core] [ 1139.753293] auxiliary_bus_remove+0x52/0x70 [ 1139.754028] device_release_driver_internal+0x3c1/0x600 [ 1139.754885] driver_detach+0xc1/0x180 [ 1139.755553] bus_remove_driver+0xef/0x2e0 [ 1139.756260] auxiliary_driver_unregister+0x16/0x50 [ 1139.757059] mlx5e_rep_cleanup+0x19/0x30 [mlx5_core] [ 1139.758207] mlx5e_cleanup+0x12/0x30 [mlx5_core] [ 1139.759295] mlx5_cleanup+0xc/0x49 [mlx5_core] [ 1139.760384] __x64_sys_delete_module+0x2b5/0x450 [ 1139.761166] do_syscall_64+0x3d/0x90 [ 1139.761827] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1139.762663] other info that might help us debug this: [ 1139.763925] Chain exists of: &node->lock --> (work_completion)(&ht->run_work) --> &tc_ht_lock_key [ 1139.765743] Possible unsafe locking scenario: [ 1139.766688] CPU0 CPU1 [ 1139.767399] ---- ---- [ 1139.768111] lock(&tc_ht_lock_key); [ 1139.768704] lock((work_completion)(&ht->run_work)); [ 1139.769869] lock(&tc_ht_lock_key); [ 1139.770770] lock(&node->lock); [ 1139.771326] *** DEADLOCK *** [ 1139.772345] 2 locks held by modprobe/5998: [ 1139.772994] #0: ffff88813c1ff0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 1139.774399] #1: ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0 [ 1139.775822] stack backtrace: [ 1139.776579] CPU: 3 PID: 5998 Comm: modprobe Not tainted 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 [ 1139.777935] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1139.779529] Call Trace: [ 1139.779992] <TASK> [ 1139.780409] dump_stack_lvl+0x57/0x7d [ 1139.781015] check_noncircular+0x278/0x300 [ 1139.781687] ? print_circular_bug+0x460/0x460 [ 1139.782381] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1139.783121] ? lock_release+0x487/0x7c0 [ 1139.783759] ? orc_find.part.0+0x1f1/0x330 [ 1139.784423] ? mark_lock.part.0+0xef/0x2fc0 [ 1139.785091] __lock_acquire+0x2cf5/0x62f0 [ 1139.785754] ? register_lock_class+0x18e0/0x18e0 [ 1139.786483] lock_acquire+0x1c1/0x540 [ 1139.787093] ? down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.788195] ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 [ 1139.788978] ? register_lock_class+0x18e0/0x18e0 [ 1139.789715] down_write+0x8e/0x1f0 [ 1139.790292] ? down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.791380] ? down_write_killable+0x220/0x220 [ 1139.792080] ? find_held_lock+0x2d/0x110 [ 1139.792713] down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.793795] mlx5_del_flow_rules+0x6f/0x610 [mlx5_core] [ 1139.794879] __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core] [ 1139.796032] ? __esw_offloads_unload_rep+0xd0/0xd0 [mlx5_core] [ 1139.797227] ? xa_load+0x11a/0x200 [ 1139.797800] ? __xa_clear_mark+0xf0/0xf0 [ 1139.798438] mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core] [ 1139.799660] mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core] [ 1139.800821] mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core] [ 1139.802049] ? mlx5_eswitch_get_uplink_priv+0x25/0x80 [mlx5_core] [ 1139.803260] mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core] [ 1139.804398] ? __cancel_work_timer+0x1c2/0x3f0 [ 1139.805099] ? mlx5e_tc_unoffload_from_slow_path+0x460/0x460 [mlx5_core] [ 1139.806387] mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core] [ 1139.807481] _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core] [ 1139.808564] rhashtable_free_and_destroy+0x3be/0x6f0 [ 1139.809336] ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core] [ 1139.809336] ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core] [ 1139.810455] mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core] [ 1139.811552] mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core] [ 1139.812655] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] [ 1139.813768] mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core] [ 1139.814952] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] [ 1139.816166] mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core] [ 1139.817336] __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core] [ 1139.818507] mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core] [ 1139.819788] ? mlx5_eswitch_uplink_get_proto_dev+0x30/0x30 [mlx5_core] [ 1139.821051] ? kernfs_find_ns+0x137/0x310 [ 1139.821705] mlx5e_rep_remove+0x62/0x80 [mlx5_core] [ 1139.822778] auxiliary_bus_remove+0x52/0x70 [ 1139.823449] device_release_driver_internal+0x3c1/0x600 [ 1139.824240] driver_detach+0xc1/0x180 [ 1139.824842] bus_remove_driver+0xef/0x2e0 [ 1139.825504] auxiliary_driver_unregister+0x16/0x50 [ 1139.826245] mlx5e_rep_cleanup+0x19/0x30 [mlx5_core] [ 1139.827322] mlx5e_cleanup+0x12/0x30 [mlx5_core] [ 1139.828345] mlx5_cleanup+0xc/0x49 [mlx5_core] [ 1139.829382] __x64_sys_delete_module+0x2b5/0x450 [ 1139.830119] ? module_flags+0x300/0x300 [ 1139.830750] ? task_work_func_match+0x50/0x50 [ 1139.831440] ? task_work_cancel+0x20/0x20 [ 1139.832088] ? lockdep_hardirqs_on_prepare+0x273/0x3f0 [ 1139.832873] ? syscall_enter_from_user_mode+0x1d/0x50 [ 1139.833661] ? trace_hardirqs_on+0x2d/0x100 [ 1139.834328] do_syscall_64+0x3d/0x90 [ 1139.834922] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1139.835700] RIP: 0033:0x7f153e71288b [ 1139.836302] Code: 73 01 c3 48 8b 0d 9d 75 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6d 75 0e 00 f7 d8 64 89 01 48 [ 1139.838866] RSP: 002b:00007ffe0a3ed938 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1139.840020] RAX: ffffffffffffffda RBX: 0000564c2cbf8220 RCX: 00007f153e71288b [ 1139.841043] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000564c2cbf8288 [ 1139.842072] RBP: 0000564c2cbf8220 R08: 0000000000000000 R09: 0000000000000000 [ 1139.843094] R10: 00007f153e7a3ac0 R11: 0000000000000206 R12: 0000564c2cbf8288 [ 1139.844118] R13: 0000000000000000 R14: 0000564c2cbf7ae8 R15: 00007ffe0a3efcb8 Fixes: 9ba33339c043 ("net/mlx5e: Avoid false lock depenency warning on tc_ht") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()Yang Yingliang
Add missing mutex_unlock() before returning from mlx5_fw_fatal_reporter_err_work(). Fixes: 9078e843efec ("net/mlx5: Avoid recovery in probe flows") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-18kheaders: explicitly validate existence of cpio commandThomas Weißschuh
If the cpio command is not available the error emitted by gen_kheaders.so is not clear as all output of the call to cpio is discarded: GNU make 4.4: GEN kernel/kheaders_data.tar.xz find: 'standard output': Broken pipe find: write error make[2]: *** [kernel/Makefile:157: kernel/kheaders_data.tar.xz] Error 127 make[1]: *** [scripts/Makefile.build:504: kernel] Error 2 GNU make < 4.4: GEN kernel/kheaders_data.tar.xz make[2]: *** [kernel/Makefile:157: kernel/kheaders_data.tar.xz] Error 127 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [scripts/Makefile.build:504: kernel] Error 2 Add an explicit check that will trigger a clear message about the issue: CHK kernel/kheaders_data.tar.xz ./kernel/gen_kheaders.sh: line 17: type: cpio: not found The other commands executed by gen_kheaders.sh are part of a standard installation, so they are not checked. Reported-by: Amy Parker <apark0006@student.cerritos.edu> Link: https://lore.kernel.org/lkml/CAPOgqxFva=tOuh1UitCSN38+28q3BNXKq19rEsVNPRzRqKqZ+g@mail.gmail.com/ Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Nicolas Schier <n.schier@avm.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-17Merge tag 'for-net-2023-01-17' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix a buffer overflow in mgmt_mesh_add - Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2 - Fix hci_qca shutdown on closed serdev - Fix possible circular locking dependencies on ISO code - Fix possible deadlock in rfcomm_sk_state_change * tag 'for-net-2023-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: Fix possible deadlock in rfcomm_sk_state_change Bluetooth: ISO: Fix possible circular locking dependency Bluetooth: hci_event: Fix Invalid wait context Bluetooth: ISO: Fix possible circular locking dependency Bluetooth: hci_sync: fix memory leak in hci_update_adv_data() Bluetooth: hci_qca: Fix driver shutdown on closed serdev Bluetooth: hci_conn: Fix memory leaks Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2 Bluetooth: Fix a buffer overflow in mgmt_mesh_add() ==================== Link: https://lore.kernel.org/r/20230118002944.1679845-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== bpf 2023-01-16 We've added 6 non-merge commits during the last 8 day(s) which contain a total of 6 files changed, 22 insertions(+), 24 deletions(-). The main changes are: 1) Mitigate a Spectre v4 leak in unprivileged BPF from speculative pointer-as-scalar type confusion, from Luis Gerhorst. 2) Fix a splat when pid 1 attaches a BPF program that attempts to send killing signal to itself, from Hao Sun. 3) Fix BPF program ID information in BPF_AUDIT_UNLOAD as well as PERF_BPF_EVENT_PROG_UNLOAD events, from Paul Moore. 4) Fix BPF verifier warning triggered from invalid kfunc call in backtrack_insn, also from Hao Sun. 5) Fix potential deadlock in htab_lock_bucket from same bucket index but different map_locked index, from Tonghao Zhang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation bpf: hash map, avoid deadlock with suitable hash mask bpf: remove the do_idr_lock parameter from bpf_prog_free_id() bpf: restore the ebpf program ID for BPF_AUDIT_UNLOAD and PERF_BPF_EVENT_PROG_UNLOAD bpf: Skip task with pid=1 in send_signal_common() bpf: Skip invalid kfunc call in backtrack_insn ==================== Link: https://lore.kernel.org/r/20230116230745.21742-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17MAINTAINERS: Update AMD XGBE driver maintainersShyam Sundar S K
Due to other additional responsibilities Tom would no longer be able to support AMD XGBE driver. Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230116085015.443127-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17net: ipa: disable ipa interrupt during suspendCaleb Connolly
The IPA interrupt can fire when pm_runtime is disabled due to it racing with the PM suspend/resume code. This causes a splat in the interrupt handler when it tries to call pm_runtime_get(). Explicitly disable the interrupt in our ->suspend callback, and re-enable it in ->resume to avoid this. If there is an interrupt pending it will be handled after resuming. The interrupt is a wake_irq, as a result even when disabled if it fires it will cause the system to wake from suspend as well as cancel any suspend transition that may be in progress. If there is an interrupt pending, the ipa_isr_thread handler will be called after resuming. Fixes: 1aac309d3207 ("net: ipa: use autosuspend") Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17Bluetooth: Fix possible deadlock in rfcomm_sk_state_changeYing Hsu
syzbot reports a possible deadlock in rfcomm_sk_state_change [1]. While rfcomm_sock_connect acquires the sk lock and waits for the rfcomm lock, rfcomm_sock_release could have the rfcomm lock and hit a deadlock for acquiring the sk lock. Here's a simplified flow: rfcomm_sock_connect: lock_sock(sk) rfcomm_dlc_open: rfcomm_lock() rfcomm_sock_release: rfcomm_sock_shutdown: rfcomm_lock() __rfcomm_dlc_close: rfcomm_k_state_change: lock_sock(sk) This patch drops the sk lock before calling rfcomm_dlc_open to avoid the possible deadlock and holds sk's reference count to prevent use-after-free after rfcomm_dlc_open completes. Reported-by: syzbot+d7ce59...@syzkaller.appspotmail.com Fixes: 1804fdf6e494 ("Bluetooth: btintel: Combine setting up MSFT extension") Link: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 [1] Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17Bluetooth: ISO: Fix possible circular locking dependencyLuiz Augusto von Dentz
This attempts to fix the following trace: iso-tester/52 is trying to acquire lock: ffff8880024e0070 (&hdev->lock){+.+.}-{3:3}, at: iso_sock_listen+0x29e/0x440 but task is already holding lock: ffff888001978130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_sock_listen+0x8b/0x440 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: lock_acquire+0x176/0x3d0 lock_sock_nested+0x32/0x80 iso_connect_cfm+0x1a3/0x630 hci_cc_le_setup_iso_path+0x195/0x340 hci_cmd_complete_evt+0x1ae/0x500 hci_event_packet+0x38e/0x7c0 hci_rx_work+0x34c/0x980 process_one_work+0x5a5/0x9a0 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x22/0x30 -> #1 (hci_cb_list_lock){+.+.}-{3:3}: lock_acquire+0x176/0x3d0 __mutex_lock+0x13b/0xf50 hci_le_remote_feat_complete_evt+0x17e/0x320 hci_event_packet+0x38e/0x7c0 hci_rx_work+0x34c/0x980 process_one_work+0x5a5/0x9a0 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x22/0x30 -> #0 (&hdev->lock){+.+.}-{3:3}: check_prev_add+0xfc/0x1190 __lock_acquire+0x1e27/0x2750 lock_acquire+0x176/0x3d0 __mutex_lock+0x13b/0xf50 iso_sock_listen+0x29e/0x440 __sys_listen+0xe6/0x160 __x64_sys_listen+0x25/0x30 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x62/0xcc other info that might help us debug this: Chain exists of: &hdev->lock --> hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_ISO Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by iso-tester/52: #0: ffff888001978130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_sock_listen+0x8b/0x440 Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17Bluetooth: hci_event: Fix Invalid wait contextLuiz Augusto von Dentz
This fixes the following trace caused by attempting to lock cmd_sync_work_lock while holding the rcu_read_lock: kworker/u3:2/212 is trying to lock: ffff888002600910 (&hdev->cmd_sync_work_lock){+.+.}-{3:3}, at: hci_cmd_sync_queue+0xad/0x140 other info that might help us debug this: context-{4:4} 4 locks held by kworker/u3:2/212: #0: ffff8880028c6530 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x4dc/0x9a0 #1: ffff888001aafde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x4dc/0x9a0 #2: ffff888002600070 (&hdev->lock){+.+.}-{3:3}, at: hci_cc_le_set_cig_params+0x64/0x4f0 #3: ffffffffa5994b00 (rcu_read_lock){....}-{1:2}, at: hci_cc_le_set_cig_params+0x2f9/0x4f0 Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17Bluetooth: ISO: Fix possible circular locking dependencyLuiz Augusto von Dentz
This attempts to fix the following trace: kworker/u3:1/184 is trying to acquire lock: ffff888001888130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_connect_cfm+0x2de/0x690 but task is already holding lock: ffff8880028d1c20 (&conn->lock){+.+.}-{2:2}, at: iso_connect_cfm+0x265/0x690 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&conn->lock){+.+.}-{2:2}: lock_acquire+0x176/0x3d0 _raw_spin_lock+0x2a/0x40 __iso_sock_close+0x1dd/0x4f0 iso_sock_release+0xa0/0x1b0 sock_close+0x5e/0x120 __fput+0x102/0x410 task_work_run+0xf1/0x160 exit_to_user_mode_prepare+0x170/0x180 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x4e/0x90 entry_SYSCALL_64_after_hwframe+0x62/0xcc -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: check_prev_add+0xfc/0x1190 __lock_acquire+0x1e27/0x2750 lock_acquire+0x176/0x3d0 lock_sock_nested+0x32/0x80 iso_connect_cfm+0x2de/0x690 hci_cc_le_setup_iso_path+0x195/0x340 hci_cmd_complete_evt+0x1ae/0x500 hci_event_packet+0x38e/0x7c0 hci_rx_work+0x34c/0x980 process_one_work+0x5a5/0x9a0 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x22/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&conn->lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); lock(&conn->lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); *** DEADLOCK *** Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17Bluetooth: hci_sync: fix memory leak in hci_update_adv_data()Zhengchao Shao
When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR to pass the instance to callback so no memory needs to be allocated. Fixes: 651cd3d65b0f ("Bluetooth: convert hci_update_adv_data to hci_sync") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17Bluetooth: hci_qca: Fix driver shutdown on closed serdevKrzysztof Kozlowski
The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194 Fixes: 7e7bbddd029b ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17Bluetooth: hci_conn: Fix memory leaksZhengchao Shao
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or hci_le_big_terminate(), the memory pointed by variable d is not freed, which will cause memory leak. Add release process to error path. Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2Luiz Augusto von Dentz
Don't try to use HCI_OP_LE_READ_BUFFER_SIZE_V2 if controller don't support ISO channels, but in order to check if ISO channels are supported HCI_OP_LE_READ_LOCAL_FEATURES needs to be done earlier so the features bits can be checked on hci_le_read_buffer_size_sync. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216817 Fixes: c1631dbc00c1 ("Bluetooth: hci_sync: Fix hci_read_buffer_size_sync") Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17Bluetooth: Fix a buffer overflow in mgmt_mesh_add()Harshit Mogalapalli
Smatch Warning: net/bluetooth/mgmt_util.c:375 mgmt_mesh_add() error: __memcpy() 'mesh_tx->param' too small (48 vs 50) Analysis: 'mesh_tx->param' is array of size 48. This is the destination. u8 param[sizeof(struct mgmt_cp_mesh_send) + 29]; // 19 + 29 = 48. But in the caller 'mesh_send' we reject only when len > 50. len > (MGMT_MESH_SEND_SIZE + 31) // 19 + 31 = 50. Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-17netfilter: conntrack: handle tcp challenge acks during connection reuseFlorian Westphal
When a connection is re-used, following can happen: [ connection starts to close, fin sent in either direction ] > syn # initator quickly reuses connection < ack # peer sends a challenge ack > rst # rst, sequence number == ack_seq of previous challenge ack > syn # this syn is expected to pass Problem is that the rst will fail window validation, so it gets tagged as invalid. If ruleset drops such packets, we get repeated syn-retransmits until initator gives up or peer starts responding with syn/ack. Before the commit indicated in the "Fixes" tag below this used to work: The challenge-ack made conntrack re-init state based on the challenge ack itself, so the following rst would pass window validation. Add challenge-ack support: If we get ack for syn, record the ack_seq, and then check if the rst sequence number matches the last ack number seen in reverse direction. Fixes: c7aab4f17021 ("netfilter: nf_conntrack_tcp: re-init for syn packets only") Reported-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-01-17tools headers UAPI: Sync x86's asm/kvm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: 8aff460f216753d8 ("KVM: x86: Add a VALID_MASK for the flags in kvm_msr_filter_range") c1340fe3590ebbe7 ("KVM: x86: Add a VALID_MASK for the flag in kvm_msr_filter") be83794210e7020f ("KVM: x86: Disallow the use of KVM_MSR_FILTER_DEFAULT_ALLOW in the kernel") That just rebuilds kvm-stat.c on x86, no change in functionality. This silences these perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Aaron Lewis <aaronlewis@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Y8VR5wSAkd2A0HxS@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-17tools headers UAPI: Sync linux/kvm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: b0305c1e0e27ad91 ("KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi") That just rebuilds perf, as these patches don't add any new KVM ioctl to be harvested for the the 'perf trace' ioctl syscall argument beautifiers. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Y7Loj5slB908QSXf@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-17staging: r8188eu: convert PHY_BBConfig8188E() to common error logicMichael Straube
Convert the function PHY_BBConfig8188E() away from returning _FAIL or _SUCCESS which uses inverted error logic. Use the common error logic instead. Return 0 for success and negative values for failure. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20230115210734.18610-5-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 14:57:03 +0000