| Age | Commit message (Collapse) | Author |
|---|
|
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Previously if the `label` DT property was not present, the code composed
name for the LED in the form
"parent_name::"
For backwards compatibility we therefore set
init_data->default_label = ":";
so that the LED will not get a different name if `label` property is not
present, nor are `color` and `function`.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Do not use device_for_each_child_node. Since this driver works only with
once child node present, use device_get_next_child_node instead.
This also saves one level of indentation.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Rename this variable so that it is easier to read and easier to write in
80 columns. Also rename variable of this type in lm36274_brightness_set
from led to chip, to be consistent.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Acer Iconia Tab A500 is an Android tablet device which has two LEDs
embedded into the Power Button. Orange LED indicates "battery charging"
status and white LED indicates "wake-up/charge-done" status. The new LED
driver provides control over both LEDs to userspace.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Simplify the return expression.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
No need to use variable found, we can determine whether the mode was
found by comparing iterator variable to its limit.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Register each LED immediately after parsing OF properties. This
simplifies the driver.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Use helper variable dev instead of always writing &pdev->dev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Return directly instead of setting result and breaking.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Rename variable led_dat to led in various functions.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Rename structures:
ns2_led -> ns2_led_of_one
ns2_led_data -> ns2_led.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
This drivers leaks GPIO descriptors on driver removal. Use devres API
function devm_gpiod_get_from_of_node instead of gpiod_get_from_of_node
to avoid this.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Not-for-stable
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Move parsing of DT properties of one LED into separate function. This
saves indentation level and is nicer to read.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Move forward from platform data to device tree only.
Since commit c7896490dd1a ("leds: ns2: Absorb platform data") the
platform data structure is absorbed into the driver, because nothing
else in the source tree uses it. Since nobody complained and all usage
of this driver is via device tree, change the code to work with device
tree only. As Linus Walleij wrote, the device tree should be the
preferred way forward anyway.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Since .remove method is not needed now that we use devres, there is no
need to remember the number of LEDs in struct ns2_led_priv. Alloc simple
array of ns2_led_data structs.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
By using devres version of LED registering function we can remove the
.remove method from this driver. The probe method also gets simpler.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: David Rivshin <drivshin@allworx.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
We can return the last ret value.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Use helper variable dev instead of always writing &pdev->dev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Use helper variable dev instead of always writing &pdev->dev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Since init_data is passed with fwnode handle, we do not need to set
the of_node member of the newly created LED classdev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Previously if the `label` DT property was not present, the code composed
name for the LED in the form
"max77650::"
For backwards compatibility we therefore set
init_data->default_label = ":";
so that the LED will not get a different name if `label` property is not
present.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Use helper variable dev instead of always writing &client->dev, or
&priv->client->dev, or even &led->priv->client->dev.
With one more line moved reverse christmas tree is also achieved.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Previously if the `label` DT property was not present, the code composed
name for the LED in the form
"parent_name::"
For backwards compatibility we therefore set
init_data->default_label = ":";
so that the LED will not get a different name if `label` property is not
present.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
These two drivers do not provide remove method and use devres for
allocation of other resources, yet they use led_classdev_register
instead of the devres variant, devm_led_classdev_register.
Fix this.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: stable@kernel.org
|
|
Fix OF node leaks by calling of_node_put in
for_each_available_child_of_node when the cycle breaks or returns.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Nikita Travkin <nikitos.tr@gmail.com>
Cc: Milo Kim <milo.kim@ti.com>
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Not-for-stable: untested, theoretical, insignificant leaks
|
|
Various drivers count and iterate over OF children nodes via
of_get_child_count and for_each_child_of_node. Instead they should use
of_get_available_child_count and for_each_available_child_of_node, so
that if a given node has the `status` property set to `disabled`, the
child will be ignored.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andrey Utkin <andrey_utkin@fastmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Mauderer <oss@c-mauderer.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: David Rivshin <drivshin@allworx.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Milo Kim <milo.kim@ti.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Nikita Travkin <nikitos.tr@gmail.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Philippe Retornaz <philippe.retornaz@epfl.ch>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Simon Shields <simon@lineageos.org>
Cc: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Cc: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The devm_led_classdev_register_ext is given init_data with fwnode set,
so the LED core sets .of_node of the new LED classdev correctly.
Do not rewrite this value to parent of_node.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The dev_of_node function should be preferred.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Simply use device_get_match_data instead of matching against the match
table again.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: David Rivshin <drivshin@allworx.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Christian Mauderer <oss@c-mauderer.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
This driver can be compiled on other platforms with small change if
COMPILE_TEST=y.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
These drivers can be compiled without modification when COMPILE_TEST=y:
cobalt-qube, cobalt-raq, netxbig, ns2 and s3c24xx
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
If LEDs are configured through device tree and the property 'label' is
omitted, the label is supposed to be generated from the properties
'function' and 'color' if present. While this works fine for e.g. the
'leds-gpio' driver, it did not for 'leds-pwm'.
The reason is, you get this label naming magic only if you add a LED
device through 'devm_led_classdev_register_ext()' and pass a pointer to
the current device tree node.
For the following node from dts the LED appeared as 'led-5' in sysfs
before and as 'red:debug' after this change.
pwm_leds {
compatible = "pwm-leds";
led-5 {
function = LED_FUNCTION_DEBUG;
color = <LED_COLOR_ID_RED>;
pwms = <&pwm0 2 10000000 0>;
max-brightness = <127>;
linux,default-trigger = "heartbeat";
panic-indicator;
};
};
Signed-off-by: Alexander Dahl <post@lespocky.de>
Cc: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The chip enters hardware shutdown when the SDB pin is pulled low.
The chip releases hardware shutdown when the SDB pin is pulled high.
Signed-off-by: Grant Feng <von81@163.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
generate a 5ms low pulse on shutdown pin when startup, then the chip
becomes more stable in the complex EM environment.
Signed-off-by: Grant Feng <von81@163.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Update the binding examples for the color ID to LED_COLOR_ID_RGB
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Introduce the LP5036/30/24/18/12/9 RGB LED driver.
The difference in these parts are the number of
LED outputs where the:
LP5036 can control 36 LEDs
LP5030 can control 30 LEDs
LP5024 can control 24 LEDs
LP5018 can control 18 LEDs
LP5012 can control 12 LEDs
LP5009 can control 9 LEDs
The device has the ability to group LED outputs into control banks
so that multiple LED banks can be controlled with the same mixing and
brightness. Or the LED outputs can also be controlled independently.
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Introduce the bindings for the Texas Instruments LP5036, LP5030, LP5024,
LP5018, LP5012 and LP5009 RGB LED device driver. The LP5036/30/24/18/12/9
can control RGB LEDs individually or as part of a control bank group.
These devices have the ability to adjust the mixing control for the RGB
LEDs to obtain different colors independent of the overall brightness of
the LED grouping.
Datasheet:
http://www.ti.com/lit/ds/symlink/lp5012.pdf
http://www.ti.com/lit/ds/symlink/lp5024.pdf
http://www.ti.com/lit/ds/symlink/lp5036.pdf
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
With these kernel configs:
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5562=m
leds-lp55xx-common.c has a build error because it is builtin and
calls an interface that is built as a loadable module (due to
LEDS_CLASS=m). By making LEDS_LP55XX_COMMON depend on LEDS_CLASS,
this config combination cannot happen, thus preventing the build error.
ld: drivers/leds/leds-lp55xx-common.o: in function `lp55xx_register_leds':
leds-lp55xx-common.c:(.text+0xc5f): undefined reference to `devm_led_classdev_register_ext'
Fixes: 33b3a561f417 ("leds: support new LP8501 device - another LP55xx common")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Milo Kim <milo.kim@ti.com>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
IBM created an implementation of the PCA9552 on a PIC16F
microcontroller. The I2C device addresses are different from the
hardware PCA9552, so add a new compatible string and associated
platform data to be able to probe this device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
IBM created an implementation of the PCA9552 on a PIC16F
microcontroller. Document the new compatible string for this device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Remove notes about vibrations, as that is better done using input
subsystem.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
