| Age | Commit message (Collapse) | Author |
|---|
|
In case we find a socket with encapsulation enabled we should call
the encap_recv function even if just a udp header without payload is
available. The callbacks are responsible for correctly verifying and
dropping the packets.
Also, in case the header validation fails for geneve and vxlan we
shouldn't put the skb back into the socket queue, no one will pick
them up there. Instead we can simply discard them in the respective
encap_recv functions.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
bpf: verifier fixes
Further testing of 'direct packet access' uncovered
several usability issues. Fix them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Humans don't write C code like:
u8 *ptr = skb->data;
int imm = 4;
imm += ptr;
but from llvm backend point of view 'imm' and 'ptr' are registers and
imm += ptr may be preferred vs ptr += imm depending which register value
will be used further in the code, while verifier can only recognize ptr += imm.
That caused small unrelated changes in the C code of the bpf program to
trigger rejection by the verifier. Therefore teach the verifier to recognize
both ptr += imm and imm += ptr.
For example:
when R6=pkt(id=0,off=0,r=62) R7=imm22
after r7 += r6 instruction
will be R6=pkt(id=0,off=0,r=62) R7=pkt(id=0,off=22,r=62)
Fixes: 969bf05eb3ce ("bpf: direct packet access")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when packet headers are accessed in 'decreasing' order (like TCP port
may be fetched before the program reads IP src) the llvm may generate
the following code:
[...] // R7=pkt(id=0,off=22,r=70)
r2 = *(u32 *)(r7 +0) // good access
[...]
r7 += 40 // R7=pkt(id=0,off=62,r=70)
r8 = *(u32 *)(r7 +0) // good access
[...]
r1 = *(u32 *)(r7 -20) // this one will fail though it's within a safe range
// it's doing *(u32*)(skb->data + 42)
Fix verifier to recognize such code pattern
Alos turned out that 'off > range' condition is not a verifier bug.
It's a buggy program that may do something like:
if (ptr + 50 > data_end)
return 0;
ptr += 60;
*(u32*)ptr;
in such case emit
"invalid access to packet, off=0 size=4, R1(id=0,off=60,r=50)" error message,
so all information is available for the program author to fix the program.
Fixes: 969bf05eb3ce ("bpf: direct packet access")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use kmemdup when some other buffer is immediately copied into allocated
region. It replaces call to allocation followed by memcpy, by a single
call to kmemdup.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use kmemdup when some other buffer is immediately copied into allocated
region. It replaces call to allocation followed by memcpy, by a single
call to kmemdup.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use kmemdup when some other buffer is immediately copied into allocated
region. It replaces call to allocation followed by memcpy, by a single
call to kmemdup.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reviewing the filesystems that set FS_USERNS_MOUNT I spotted the
bpf filesystem. Looking at the code I saw a broken usage of mount_ns
with current->nsproxy->mnt_ns. As the code does not acquire a
reference to the mount namespace it can not possibly be correct to
store the mount namespace on the superblock as it does.
Replace mount_ns with mount_nodev so that each mount of the bpf
filesystem returns a distinct instance, and the code is not buggy.
In discussion with Hannes Frederic Sowa it was reported that the use
of mount_ns was an attempt to have one bpf instance per mount
namespace, in an attempt to keep resources that pin resources from
hiding. That intent simply does not work, the vfs is not built to
allow that kind of behavior. Which means that the bpf filesystem
really is buggy both semantically and in it's implemenation as it does
not nor can it implement the original intent.
This change is userspace visible, but my experience with similar
filesystems leads me to believe nothing will break with a model of each
mount of the bpf filesystem is distinct from all others.
Fixes: b2197755b263 ("bpf: add support for persistent maps/progs")
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers patches for 4.7
Major changes:
iwlwifi
* remove IWLWIFI_DEBUG_EXPERIMENTAL_UCODE kconfig option
* work for RX multiqueue continues
* dynamic queue allocation work continues
* add Luca as maintainer
* a bunch of fixes and improvements all over
brcmfmac
* add 4356 sdio support
ath6kl
* add ability to set debug uart baud rate with a module parameter
wil6210
* add debugfs file to configure firmware led functionality
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current implementation updates the mtu size and notify cdc_ncm
device using USB_CDC_SET_MAX_DATAGRAM_SIZE request about datagram
size change instead of changing rx_urb_size.
Whenever mtu is being changed, datagram size should also be
updated. Also updating maxmtu formula so it takes max_datagram_size with
use of cdc_ncm_max_dgram_size() and not ctx.
Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com>
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We used to check dev->reg_state against NETREG_REGISTERED after each
time we are woke up. But after commit 9e641bdcfa4e ("net-tun:
restructure tun_do_read for better sleep/wakeup efficiency"), it uses
skb_recv_datagram() which does not check dev->reg_state. This will
result if we delete a tun/tap device after a process is blocked in the
reading. The device will wait for the reference count which was held
by that process for ever.
Fixes this by using RCV_SHUTDOWN which will be checked during
sk_recv_datagram() before trying to wake up the process during uninit.
Fixes: 9e641bdcfa4e ("net-tun: restructure tun_do_read for better
sleep/wakeup efficiency")
Cc: Eric Dumazet <edumazet@google.com>
Cc: Xi Wang <xii@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexander Duyck says:
====================
Follow-ups for GUEoIPv6 patches
This patch series is meant to be applied after:
[PATCH v7 net-next 00/16] ipv6: Enable GUEoIPv6 and more fixes for v6 tunneling
The first patch addresses an issue we already resolved in the GREv4 and is
now present in GREv6 with the introduction of FOU/GUE for IPv6 based GRE
tunnels.
The second patch goes through and enables IPv6 tunnel offloads for the Intel
NICs that already support the IPv4 based IP-in-IP tunnel offloads. I have
only done a bit of touch testing but have seen ~20 Gb/s over an i40e
interface using a v4-in-v6 tunnel, and I have verified IPv6 GRE is still
passing traffic at around the same rate. I plan to do further testing but
with these patches present it should enable a wider audience to be able to
test the new features introduced in Tom's patchset with hardware offloads.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for offloading IPXIP6 type packets that represent
either IPv4 or IPv6 encapsulated inside of an IPv6 outer IP header. In
addition with this change we should also be able to support FOU
encapsulated traffic with outer IPv6 headers.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch addresses the same issue we had for IPv4 where enabling GRE with
an inner checksum cannot be supported with FOU/GUE due to the fact that
they will jump past the GRE header at it is treated like a tunnel header.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sowmini Varadhan says:
====================
RDS: TCP: connection spamming fixes
We have been testing the RDS-TCP code with a connection spammer
that sends incoming SYNs to the RDS listen port well after
an rds-tcp connection has been established, and found a few
race-windows that are fixed by this patch series.
Patch 1 avoids a null pointer deref when an incoming SYN
shows up when a netns is being dismantled, or when the
rds-tcp module is being unloaded.
Patch 2 addresses the case when a SYN is received after the
connection arbitration algorithm has converged: the incoming
SYN should not needlessly quiesce the transmit path, and it
should not result in needless TCP connection resets due to
re-execution of the connection arbitration logic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a rogue SYN is received after the connection arbitration
algorithm has converged, the incoming SYN should not needlessly
quiesce the transmit path, and it should not result in needless
TCP connection resets due to re-execution of the connection
arbitration logic.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are two instances where we want to terminate RDS-TCP: when
exiting the netns or during module unload. In either case, the
termination sequence is to stop the listen socket, mark the
rtn->rds_tcp_listen_sock as null, and flush any accept workqs.
Thus any workqs that get flushed at this point will encounter a
null rds_tcp_listen_sock, and must exit gracefully to allow
the RDS-TCP termination to complete successfully.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We've got nine patches this time:
- Abhi Das has two patches that fix a GFS2 splice issue (and an
adjustment).
- Ben Marzinski has a patch which allows the proper unmount of a GFS2
file system after hitting a withdraw error.
- I have a patch to fix a problem where GFS2 would dereference an
error value, plus three cosmetic / refactoring patches.
- Daniel DeFreez has a patch to fix two glock reference count
problems, where GFS2 was not properly "uninitializing" its glock
holder on error paths.
- Denys Vlasenko has a patch to change a function to not be inlined,
thus reducing the memory footprint of the GFS2 module"
* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Refactor gfs2_remove_from_journal
GFS2: Remove allocation parms from gfs2_rbm_find
gfs2: use inode_lock/unlock instead of accessing i_mutex directly
GFS2: Add calls to gfs2_holder_uninit in two error handlers
GFS2: Don't dereference inode in gfs2_inode_lookup until it's valid
GFS2: fs/gfs2/glock.c: Deinline do_error, save 1856 bytes
gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read()
GFS2: Get rid of dead code in inode_go_demote_ok
GFS2: ignore unlock failures after withdraw
|
|
->sk_shutdown bits share one bitfield with some other bits in sock struct,
such as ->sk_no_check_[r,t]x, ->sk_userlocks ...
sock_setsockopt() may write to these bits, while holding the socket lock.
In case of AF_UNIX sockets, we change ->sk_shutdown bits while holding only
unix_state_lock(). So concurrent setsockopt() and shutdown() may lead
to corrupting these bits.
Fix this by moving ->sk_shutdown bits out of bitfield into a separate byte.
This will not change the 'struct sock' size since ->sk_shutdown moved into
previously unused 16-bit hole.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tom Herbert says:
====================
ipv6: Enable GUEoIPv6 and more fixes for v6 tunneling
This patch set:
- Fixes GRE6 to process translate flags correctly from configuration
- Adds support for GSO and GRO for ip6ip6 and ip4ip6
- Add support for FOU and GUE in IPv6
- Support GRE, ip6ip6 and ip4ip6 over FOU/GUE
- Fixes ip6_input to deal with UDP encapsulations
- Some other minor fixes
v2:
- Removed a check of GSO types in MPLS
- Define GSO type SKB_GSO_IPXIP6 and SKB_GSO_IPXIP4 (based on input
from Alexander)
- Don't define GSO types specifically for IP6IP6 and IP4IP6, above
fix makes that unnecessary
- Don't bother clearing encapsulation flag in UDP tunnel segment
(another item suggested by Alexander).
v3:
- Address some minor comments from Alexander
v4:
- Rebase on changes to fix IP TX tunnels
- Fix MTU issues in ip4ip6, ip6ip6
- Add test data for above
v5:
- Address feedback from Shmulik Ladkani regarding extension header
code that does not return next header but in instead relies
on returning value via nhoff. Solution here is to fix EH
processing to return nexthdr value.
- Refactored IPv4 encaps so that we won't need to create
a ip6_tunnel_core.c when adding encap support IPv6.
v6:
- Fix build issues with regard to new GSO constants
- FIx MTU calculation issues ip6_tunnel.c pointed out byt ALex
- Add encap_hlen into headroom for GREv6 to work with FOU/GUE
v7:
- Added skb_set_inner_ipproto to ip4ip6 and ip6ip6
- Clarified max_headroom in ip6_tnl_xmit
- Set features for IPv6 tunnels
- Other cleanup suggested by Alexander
- Above fixes throughput performance issues in ip4ip6 and ip6ip6,
updated test results to reflect that
Tested: Various cases of IP tunnels with netperf TCP_STREAM and TCP_RR.
- IPv4/GRE/GUE/IPv6 with RCO
1 TCP_STREAM
6616 Mbps
200 TCP_RR
1244043 tps
141/243/446 90/95/99% latencies
86.61% CPU utilization
- IPv6/GRE/GUE/IPv6 with RCO
1 TCP_STREAM
6940 Mbps
200 TCP_RR
1270903 tps
138/236/440 90/95/99% latencies
87.51% CPU utilization
- IP6IP6
1 TCP_STREAM
5307 Mbps
200 TCP_RR
498981 tps
388/498/631 90/95/99% latencies
19.75% CPU utilization (1 CPU saturated)
- IP6IP6/GUE with RCO
1 TCP_STREAM
5575 Mbps
200 TCP_RR
1233818 tps
143/244/451 90/95/99% latencies
87.57 CPU utilization
- IP4IP6
1 TCP_STREAM
5235 Mbps
200 TCP_RR
763774 tps
250/318/466 90/95/99% latencies
35.25% CPU utilization (1 CPU saturated)
- IP4IP6/GUE with RCO
1 TCP_STREAM
5337 Mbps
200 TCP_RR
1196385 tps
148/251/460 90/95/99% latencies
87.56 CPU utilization
- GRE with keyid
200 TCP_RR
744173 tps
258/332/461 90/95/99% latencies
34.59% CPU utilization (1 CPU saturated)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since iptunnel_handle_offloads() is called in all paths we can
probably drop the block in ip6_tnl_xmit that was checking for
skb->encapsulation and resetting the inner headers.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Need to set dev features, use same values that are used in GREv6.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add netlink and setup for encapsulation
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add netlink and setup for encapsulation
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch add a new fou6 module that provides encapsulation
operations for IPv6.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add encap_hlen and ip_tunnel_encap structure to ip6_tnl. Add functions
for getting encap hlen, setting up encap on a tunnel, performing
encapsulation operation.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds receive path support for IPv6 with fou.
- Add address family to fou structure for open sockets. This supports
AF_INET and AF_INET6. Lookups for fou ports are performed on both the
port number and family.
- In fou and gue receive adjust tot_len in IPv4 header or payload_len
based on address family.
- Allow AF_INET6 in FOU_ATTR_AF netlink attribute.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create __fou_build_header and __gue_build_header. These implement the
protocol generic parts of building the fou and gue header.
fou_build_header and gue_build_header implement the IPv4 specific
functions and call the __*_build_header functions.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use helper function to set up UDP tunnel related information for a fou
socket.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Consolidate all the ip_tunnel_encap definitions in one spot in the
header file. Also, move ip_encap_hlen and ip_tunnel_encap from
ip_tunnel.c to ip_tunnels.h so they call be called without a dependency
on ip_tunnel module. Similarly, move iptun_encaps to ip_tunnel_core.c.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When performing foo-over-UDP, UDP packets are processed by the
encapsulation handler which returns another protocol to process.
This may result in processing two (or more) protocols in the
loop that are marked as INET6_PROTO_FINAL. The actions taken
for hitting a final protocol, in particular the skb_postpull_rcsum
can only be performed once.
This patch set adds a check of a final protocol has been seen. The
rules are:
- If the final protocol has not been seen any protocol is processed
(final and non-final). In the case of a final protocol, the final
actions are taken (like the skb_postpull_rcsum)
- If a final protocol has been seen (e.g. an encapsulating UDP
header) then no further non-final protocols are allowed
(e.g. extension headers). For more final protocols the
final actions are not taken (e.g. skb_postpull_rcsum).
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ip6_input_finish the nexthdr protocol is retrieved from the
next header offset that is returned in the cb of the skb.
This method does not work for UDP encapsulation that may not
even have a concept of a nexthdr field (e.g. FOU).
This patch checks for a final protocol (INET6_PROTO_FINAL) when a
protocol handler returns > 0. If the protocol is not final then
resubmission is performed on nhoff value. If the protocol is final
then the nexthdr is taken to be the return value.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch defines two new GSO definitions SKB_GSO_IPXIP4 and
SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and
NETIF_F_GSO_IPXIP6. These are used to described IP in IP
tunnel and what the outer protocol is. The inner protocol
can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and
SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT
are removed (these are both instances of SKB_GSO_IPXIP4).
SKB_GSO_IPXIP6 will be used when support for GSO with IP
encapsulation over IPv6 is added.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In several gso_segment functions there are checks of gso_type against
a seemingly arbitrary list of SKB_GSO_* flags. This seems like an
attempt to identify unsupported GSO types, but since the stack is
the one that set these GSO types in the first place this seems
unnecessary to do. If a combination isn't valid in the first
place that stack should not allow setting it.
This is a code simplication especially for add new GSO types.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit da47b4572056 ("phy: add support for a reset-gpio specification")
causes the following xtensa qemu crash according to Guenter Roeck:
[ 9.366256] libphy: ethoc-mdio: probed
[ 9.367389] (null): could not attach to PHY
[ 9.368555] (null): failed to probe MDIO bus
[ 9.371540] Unable to handle kernel paging request at virtual address 0000001c
[ 9.371540] pc = d0320926, ra = 903209d1
[ 9.375358] Oops: sig: 11 [#1]
This reverts commit da47b4572056487fd7941c26f73b3e8815ff712a.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once we failed to merge inline data into inode page during flushing inline
inode, we will skip invoking inode_dec_dirty_pages, which makes dirty page
count incorrect, result in panic in ->evict_inode, Fix it.
------------[ cut here ]------------
kernel BUG at /home/yuchao/git/devf2fs/inode.c:336!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 10004 Comm: umount Tainted: G O 4.6.0-rc5+ #17
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
task: f0c33000 ti: c5212000 task.ti: c5212000
EIP: 0060:[<f89aacb5>] EFLAGS: 00010202 CPU: 3
EIP is at f2fs_evict_inode+0x85/0x490 [f2fs]
EAX: 00000001 EBX: c4529ea0 ECX: 00000001 EDX: 00000000
ESI: c0131000 EDI: f89dd0a0 EBP: c5213e9c ESP: c5213e78
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 80050033 CR2: b75878c0 CR3: 1a36a700 CR4: 000406f0
Stack:
c4529ea0 c4529ef4 c5213e8c c176d45c c4529ef4 00000000 c4529ea0 c4529fac
f89dd0a0 c5213eb0 c1204a68 c5213ed8 c452a2b4 c6680930 c5213ec0 c1204b64
c6680d44 c6680620 c5213eec c120588d ee84b000 ee84b5c0 c5214000 ee84b5e0
Call Trace:
[<c176d45c>] ? _raw_spin_unlock+0x2c/0x50
[<c1204a68>] evict+0xa8/0x170
[<c1204b64>] dispose_list+0x34/0x50
[<c120588d>] evict_inodes+0x10d/0x130
[<c11ea941>] generic_shutdown_super+0x41/0xe0
[<c1185190>] ? unregister_shrinker+0x40/0x50
[<c1185190>] ? unregister_shrinker+0x40/0x50
[<c11eac52>] kill_block_super+0x22/0x70
[<f89af23e>] kill_f2fs_super+0x1e/0x20 [f2fs]
[<c11eae1d>] deactivate_locked_super+0x3d/0x70
[<c11eb383>] deactivate_super+0x43/0x60
[<c1208ec9>] cleanup_mnt+0x39/0x80
[<c1208f50>] __cleanup_mnt+0x10/0x20
[<c107d091>] task_work_run+0x71/0x90
[<c105725a>] exit_to_usermode_loop+0x72/0x9e
[<c1001c7c>] do_fast_syscall_32+0x19c/0x1c0
[<c176dd48>] sysenter_past_esp+0x45/0x74
EIP: [<f89aacb5>] f2fs_evict_inode+0x85/0x490 [f2fs] SS:ESP 0068:c5213e78
---[ end trace d30536330b7fdc58 ]---
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Rewrite of the unflattening code to avoid recursion and lessen the
stack usage.
- Rewrite of the phandle args parsing code to get rid of the fixed args
size. This is needed for IOMMU code.
- Sync to latest dtc which adds more dts style checking. These
warnings are enabled with "W=1" compiles.
- Tegra documentation updates related to the above warnings.
- A bunch of spelling and other doc fixes.
- Various vendor prefix additions.
* tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits)
devicetree: Add Creative Technology vendor id
gpio: dt-bindings: add ibm,ppc4xx-gpio binding
of/unittest: Remove unnecessary module.h header inclusion
drivers/of: Fix build warning in populate_node()
drivers/of: Fix depth when unflattening devicetree
of: dynamic: changeset prop-update revert fix
drivers/of: Export of_detach_node()
drivers/of: Return allocated memory from of_fdt_unflatten_tree()
drivers/of: Specify parent node in of_fdt_unflatten_tree()
drivers/of: Rename unflatten_dt_node()
drivers/of: Avoid recursively calling unflatten_dt_node()
drivers/of: Split unflatten_dt_node()
of: include errno.h in of_graph.h
of: document refcount incrementation of of_get_cpu_node()
Documentation: dt: soc: fix spelling mistakes
Documentation: dt: power: fix spelling mistake
Documentation: dt: pinctrl: fix spelling mistake
Documentation: dt: opp: fix spelling mistake
Documentation: dt: net: fix spelling mistakes
Documentation: dt: mtd: fix spelling mistake
...
|
|
A domain with a frontend that does not implement a control ring has been
seen to cause a crash during domain save. This was apparently because
the call to xenvif_deinit_hash() in xenvif_disconnect_ctrl() is made
regardless of whether a control ring was connected, and hence
xenvif_hash_init() was called.
This patch brings the call to xenvif_deinit_hash() in
xenvif_disconnect_ctrl() inside the if clause that checks whether the
control ring event channel was connected. This is sufficient to ensure
it is only called if xenvif_init_hash() was called previously.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Primary 4.7 merge window changes
- Updates to the new Intel X722 iWARP driver
- Updates to the hfi1 driver
- Fixes for the iw_cxgb4 driver
- Misc core fixes
- Generic RDMA READ/WRITE API addition
- SRP updates
- Misc ipoib updates
- Minor mlx5 updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (148 commits)
IB/mlx5: Fire the CQ completion handler from tasklet
net/mlx5_core: Use tasklet for user-space CQ completion events
IB/core: Do not require CAP_NET_ADMIN for packet sniffing
IB/mlx4: Fix unaligned access in send_reply_to_slave
IB/mlx5: Report Scatter FCS device capability when supported
IB/mlx5: Add Scatter FCS support for Raw Packet QP
IB/core: Add Scatter FCS create flag
IB/core: Add Raw Scatter FCS device capability
IB/core: Add extended device capability flags
i40iw: pass hw_stats by reference rather than by value
i40iw: Remove unnecessary synchronize_irq() before free_irq()
i40iw: constify i40iw_vf_cqp_ops structure
IB/mlx5: Add UARs write-combining and non-cached mapping
IB/mlx5: Allow mapping the free running counter on PROT_EXEC
IB/mlx4: Use list_for_each_entry_safe
IB/SA: Use correct free function
IB/core: Fix a potential array overrun in CMA and SA agent
IB/core: Remove unnecessary check in ibnl_rcv_msg
IB/IWPM: Fix a potential skb leak
RDMA/nes: replace custom print_hex_dump()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- alternative reset driver for new at91 SoCs
- misc fixes
* tag 'for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
sbs-battery: fix power status when battery charging near dry
power: ipaq-micro-battery: freeing the wrong variable
power/max8925: freeing wrong variable
power: reset: at91-shdwc: add new shutdown controller driver
ARM: dts: at91: shdwc binding: add new shutdown controller documentation
|
|
Given errors, this patch flushes pending bios as soon as possible.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch avoids impossible error injection, ENOSPC, during recovery process.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When CONFIG_NET_CLS_ACT is disabled, we get a new warning in the mlx5
ethernet driver because the tc_for_each_action() loop never references
the iterator:
mellanox/mlx5/core/en_tc.c: In function 'mlx5e_stats_flower':
mellanox/mlx5/core/en_tc.c:431:20: error: unused variable 'a' [-Werror=unused-variable]
struct tc_action *a;
This changes the dummy tc_for_each_action() macro by adding a
cast to void, letting the compiler know that the variable is
intentionally declared but not used here. I could not come up
with a nicer workaround, but this seems to do the trick.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: aad7e08d39bd ("net/mlx5e: Hardware offloaded flower filter statistics support")
Fixes: 00175aec941e ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef")
Acked-By: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Start address randomization and blinding in BPF currently use
prandom_u32(). prandom_u32() values are not exposed to unpriviledged
user space to my knowledge, but given other kernel facilities such as
ASLR, stack canaries, etc make use of stronger get_random_int(), we
better make use of it here as well given blinding requests successively
new random values. get_random_int() has minimal entropy pool depletion,
is not cryptographically secure, but doesn't need to be for our use
cases here.
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver incorrectly uses dma_unmap_addr_set() to set
a variable which is in truth a dma_addr_t
[i.e not defined using DEFINE_DMA_UNMAP_ADDR()] and is
being used by the driver flows other than unmapping
physical addresses. This patch fixes driver fastpath
where CONFIG_NEED_DMA_MAP_STATE is not set.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In my last commit I replaced MACSEC_SA_ATTR_KEYID by
MACSEC_SA_ATTR_KEY.
Fixes: 8acca6acebd0 ("macsec: key identifier is 128 bits, not 64")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add new driver for MAXIM MAX77620/MAX20024 PMIC
- Add new driver for Hisilicon HI665X PMIC
New Device Support:
- Add support for AXP809 in axp20x-rsb
- Add support for Power Supply in axp20x
New core features:
- devm_mfd_* managed resources
Fix-ups:
- Remove unused code (da9063-irq, wm8400-core, tps6105x,
smsc-ece1099, twl4030-power)
- Improve clean-up in error path (intel_quark_i2c_gpio)
- Explicitly include headers (syscon.h)
- Allow building as modules (max77693)
- Use IS_ENABLED() instead of rolling your own (dm355evm_msp,
wm8400-core)
- DT adaptions (axp20x, hi655x, arizona, max77620)
- Remove CLK_IS_ROOT flag (intel-lpss, intel_quark)
- Move to gpiochip API (asic3, dm355evm_msp, htc-egpio, htc-i2cpld,
sm501, tc6393xb, tps65010, ucb1x00, vexpress)
- Make use of devm_mfd_* calls (act8945a, as3711, atmel-hlcdc,
bcm590xx, hi6421-pmic-core, lp3943, menf21bmc, mt6397, rdc321x,
rk808, rn5t618, rt5033, sky81452, stw481x, tps6507x, tps65217,
wm8400)
Bug Fixes"
- Fix ACPI child matching (mfd-core)
- Fix start-up ordering issues (mt6397-core, arizona-core)
- Fix forgotten register state on resume (intel-lpss)
- Fix Clock related issues (twl6040)
- Fix scheduling whilst atomic (omap-usb-tll)
- Kconfig changes (vexpress)"
* tag 'mfd-for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
mfd: hi655x: Add MFD driver for hi655x
mfd: ab8500-debugfs: Trivial fix of spelling mistake on "between"
mfd: vexpress: Add !ARCH_USES_GETTIMEOFFSET dependency
mfd: Add device-tree binding doc for PMIC MAX77620/MAX20024
mfd: max77620: Add core driver for MAX77620/MAX20024
mfd: arizona: Add defines for GPSW values that can be used from DT
mfd: omap-usb-tll: Fix scheduling while atomic BUG
mfd: wm5110: ARIZONA_CLOCK_CONTROL should be volatile
mfd: axp20x: Add a cell for the ac power_supply part of the axp20x PMICs
mfd: intel_soc_pmic_core: Terminate panel control GPIO lookup table correctly
mfd: wl1273-core: Use devm_mfd_add_devices() for mfd_device registration
mfd: tps65910: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irq
mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
mfd: twl4030-power: Remove driver path in file comment
MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers
mfd: smsc-ece1099: Remove unnecessarily remove callback
mfd: Use IS_ENABLED(CONFIG_FOO) instead of checking FOO || FOO_MODULE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- merge omap-ssi and omap-ssi-port modules
- fix omap-ssi module reloading
- add DVFS support to omap-ssi
* tag 'hsi-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap-ssi: move omap_ssi_port_update_fclk
HSI: omap-ssi: include pinctrl header files
HSI: omap-ssi: add COMMON_CLK dependency
HSI: omap-ssi: add clk change support
HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module
HSI: omap_ssi: fix removal of port platform device
HSI: omap_ssi: make sure probe stays available
HSI: omap_ssi: fix module unloading
HSI: omap_ssi_port: switch to gpiod API
|
