summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-18ARM: dts: BCM5301X: Set GPIO enabling USB power on Netgear R7000Rafał Miłecki
There is one GPIO controlling power for both USB ports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-18ARM: dts: BCM5301X: Specify USB controllers in DTRafał Miłecki
There are 3 separated controllers, one per USB /standard/. With PHY drivers in place they can be simply supported with generic drivers. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-18ARM: dts: BCM5301X: Fix LAN LED labels for Luxul XWR-3100Rafał Miłecki
They were named incorrectly most likely due to copy & paste mistake. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-18ARM: dts: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012Rafał Miłecki
Every device tested so far got UART0 (at 0x18000300) working as serial console. It's most likely part of reference design and all vendors use it that way. It seems to be easier to enable it by default and just disable it if we ever see a device with different hardware design. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Jon Mason <jon.mason@broadcom.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-18Merge tag 'aspeed-4.11-devicetree' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt Aspeed devicetree updates for 4.11 This introduces the first OpenPower Power9 BMC system, Romulus. Romulus is based on the ast2500 SoC from Aspeed. These commits also add newly upstreamed drivers to the Palmetto BMC and ast2500 eval board. We now have working network, ipmi bt, gpio and pinmux on all platforms. * tag 'aspeed-4.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add Romulus BMC platform ARM: dts: aspeed: Add ftgmac100 to g4 and g5 platforms ARM: dts: aspeed: Correct palmetto device tree ARM: dts: aspeed: Reserve framebuffer memory ARM: dts: aspeed-g5: Add gpio controller to devicetree ARM: dts: aspeed-g5: Add syscon and pin controller nodes ARM: dts: aspeed-g5: Add LPC Controller node ARM: dts: aspeed-g5: Add SoC Display Controller node ARM: dts: aspeed-g4: Add gpio controller to devicetree ARM: dts: aspeed-g4: Add syscon and pin controller nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-18Merge tag 'at91-ab-4.11-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt DT for 4.11: - New boards: Axentia TSE-850, sama5d36ek CMP - new device definitions for sama5d2 - Fix DMA allocation on sama5d4 for secure peripherals * tag 'at91-ab-4.11-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: add devicetree for the Axentia TSE-850 ARM: dts: at91: add dts file for sama5d36ek CMP board ARM: dts: at91: sama5d2: add ssc0 definition ARM: dts: at91: sama5d2 Xplained: use DMA for UART3 ARM: dts: at91: sama5d2: move UART3 to DMA1 ARM: dts: at91: add dma1 definition to sama5d2 ARM: dts: at91: sama5d4 Xplained: enable UART1 node with DMA ARM: dts: at91: sama5d4: change DMA allocation for secure peripherals ARM: dts: at91: sama5d3_uart: fix reg sizes to match documentation Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16Merge tag 'stm32-dt-for-v4.11-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt STM32 DT updates for v4.11, round 1. Highlights: ---------- - ADD RTC support on STM32F429 MCU - Enable RTC on STM32F469and STM32F429 boards - ADD ADC support on STM32F429 MCU - Enable ADC on STM32F429 Eval board - Add I2S external clock - Fix memory size for STM32F429 Disco Note: ----- First patch "clk: stm32f4: Update DT bindings documentation") has already been merged in clock tree. * tag 'stm32-dt-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: enable RTC on stm32429i-eval ARM: dts: stm32: enable RTC on stm32f469-disco ARM: dts: stm32: enable RTC on stm32f429-disco ARM: dts: stm32: Add RTC support for STM32F429 MCU ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429 ARM: dts: stm32: Include auxiliary stm32fx clock definition ARM: dts: stm32: Add external I2S clock on stm32f429 MCU ARM: dts: stm32: enable ADC on stm32f429i-eval board ARM: dts: stm32: Add ADC support to stm32f429 ARM: dts: stm32: Add missing USART3 pin config to stm32f469-disco board ARM: dts: stm32: Fix memory size from 8MB to 16MB on stm32f469-disco board clk: stm32f4: Update DT bindings documentation Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16Merge tag 'mvebu-dt-4.11-1' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
mvebu dt for 4.11 (part 1) - Add support for the ethernet switch on the Turris Omnia board - Clean up and improvement for ClearFog boards - Correct license text which was mangled when switching to dual license * tag 'mvebu-dt-4.11-1' of git://git.infradead.org/linux-mvebu: ARM: dts: turris-omnia: add support for ethernet switch ARM: dts: armada388-clearfog: move uart nodes ARM: dts: armada388-clearfog: move ethernet related nodes ARM: dts: armada388-clearfog: move I2C nodes ARM: dts: armada388-clearfog: move device specific pinctrl nodes ARM: dts: armada388-clearfog: add pro model DTS file ARM: dts: armada388-clearfog: add base model DTS file ARM: dts: armada388-clearfog: move rear button ARM: dts: armada388-clearfog: move SPI CS1 ARM: dts: armada388-clearfog: move second PCIe port ARM: dts: armada388-clearfog: move DSA switch ARM: dts: armada388-clearfog: split clearfog DTS file ARM: dts: armada388-clearfog: move sdhci pinctrl node to microsom ARM: dts: armada388-clearfog: move SPI flash into microsom ARM: dts: armada388-clearfog: fix SPI flash #size-cells ARM: dts: mvebu: Correct license text Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16Merge tag 'samsung-dt-4.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DeviceTree update for v4.11: 1. Fixes for initial audio clocks configuration. 2. Enable sound on Odroid-X board. 3. Enable DMA for UART modules on Exynos5 SoCs. 4. Add CPU OPPs for Exynos4412 Prime (newer version of Exynos4412). This pulls necessary change in the clocks. 5. Remove Exynos4212. We do not have any mainline boards with it. This will simplify few bits later. * tag 'samsung-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: remove Exynos4212 support (dead code) ARM: dts: exynos: Add CPU OPPs for Exynos4412 Prime clk: samsung: Add CPU clk configuration data for Exynos4412 Prime ARM: dts: exynos: Enable DMA support for UART modules on Exynos5 SoCs ARM: dts: exynos: Cleanup Odroid-X2 and enable sound on Odroid-X ARM: dts: exynos: Fix initial audio clocks configuration on Exynos4 boards ARM: dts: exynos: Correct clocks for Exynos4 I2S module Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16Merge tag 'sti-dt-for-v4.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt STi dts update: Enable High Quality Video Data Plane (HQVDP) DT entry Add DELTA V4L2 video decoder DT entry Disable unused fdma instances Fix sti-display-subsystem wrong clock parent's value Cleanup and update DT entries related to remoteproc * tag 'sti-dt-for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: STiH407-family: Supply Mailbox properties to delta RProc ARM: dts: STiH407-family: Supply mailbox properties to GP0 RProc ARM: dts: STiH407-family: update dmu remoteproc node ARM: dts: STiH407-family: remove gp1 remoteproc node ARM: dts: STiH407-family: remove audio remoteproc node ARM: dts: STiH407-family: update gp0_reserved memory region ARM: dts: STiH410-family: fix wrong parent clock frequency ARM: dts: STiH410: add DELTA dt node ARM: dts: STiH407-family: disable fdma1 and fdma2 ARM: dts: STiH410: add hqvdp node ARM: dts: STiH410-B2120: enable sti-hda at board level Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16Merge tag 'socfpga_dts_for_v4.11_part_1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v4.11, part 1 - Adds FPGA manager bits - Enable I2C on Cyclone5 and Arria5 devkits - Adds LED support on C5/A5 devkits - Enables CAN on C5 devkit - Enables watchdog - Add NAND on Arria10 - Add the LTC2977 Power Monitor on Arria10 devkit * tag 'socfpga_dts_for_v4.11_part_1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: add missing compatible string for SDRAM controller ARM: dts: socfpga: add fpga region support on Arria10 ARM: dts: socfpga: add base fpga region and fpga bridges ARM: dts: socfpga: fpga manager data is 32 bits ARM: dts: socfpga: Add NAND device tree for Arria10 ARM: dts: socfpga: add fpga-manager node for Arria10 ARM: dts: socfpga: add the LTC2977 power monitor on Arria10 devkit ARM: dts: socfpga: enable watchdog timer on Arria5 and Arria10 ARM: dts: socfpga: enable CAN on Cyclone5 devkit ARM: dts: socfpga: Add Rohm DH2228FV DAC ARM: dts: socfpga: set desired i2c clock on Cyclone5 and Arria5 devkits ARM: dts: socfpga: enable GPIO and LEDs for Cyclone5 and Arria5 devkits Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16ARM: dts: stm32: enable RTC on stm32429i-evalAmelie Delaunay
This patch enables RTC on stm32429i-eval with default LSE clock source. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-01-16ARM: dts: stm32: enable RTC on stm32f469-discoAmelie Delaunay
This patch enables RTC on stm32f469-disco with default LSE clock source. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-01-16ARM: dts: stm32: enable RTC on stm32f429-discoAmelie Delaunay
This patch enables RTC on stm32f429-disco with LSI as clock source because X2 crystal for LSE is not fitted by default. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-01-16ARM: dts: stm32: Add RTC support for STM32F429 MCUAmelie Delaunay
This patch adds STM32 RTC bindings for STM32F429. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-01-16ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429Amelie Delaunay
This patch set HSE_RTC clock frequency to 1 MHz, as the clock supplied to the RTC must be 1 MHz. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-01-13ARM: dts: qcom: Add apq8064 CoreSight componentsIvan T. Ivanov
Add initial set of CoreSight components found on Qualcomm apq8064 based platforms, including the IFC6410 board. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: Add gyro and accel to APQ8060 DragonboardLinus Walleij
This adds the MPU-3050 gyroscope and the KXSD9 accelerometer to the Qualcomm APQ8060 Dragonboard. The KXSD9 is mounted beyond the MPU-3050 and appear as a subdevice beyond it. We set up the required GPIO and interrupt lines to make the devices work. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: reference PM8058 as IRQ parentLinus Walleij
Some nodes are referencing the pm8058_gpio as IRQ parent, but the HW IRQ offset they are supplying is actually that for the parent to that controller: the PM8058 itself. Since that is the proper parent, reference it directly. We can switch this to the pm8058_gpio and the proper offset once we have fixed the SSBI GPIO driver to properly deal with the hierarchical IRQ domain and get proper local offset translation. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: rename MSM8660/APQ8060 pmicintc to pm8058Linus Walleij
The name "pmicintc" is ambiguous: there is a second power management IC named PM8901 on these systems, and it is also an interrupt controller. To make things clear, just name the node alias "pm8058", this in unambigous and has all information we need. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: sd-600eval: enable 1.8v regulator on LS expansionSrinivas Kandagatla
This patch enables 1.8v regulator on LS expansion, which should be always on according to 96boards spec. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: sd-600eval: add hdmi supportSrinivas Kandagatla
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: move hdmi pinctrl out of board file.Srinivas Kandagatla
This patch moves hdmi pinctrl defination from board file to soc level pinctrl file. If not this pinctrl setup will be duplicated across all the apq8064 based board files. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: qcom: sd600eval: Enable riva-pilBjorn Andersson
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: qcom: sd600-eval: pm8921_s2 regulator propertiesBjorn Andersson
Add the missing properties for pm8921 smps2. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: qcom: apq8064-sony-yuga: Enable riva-pilBjorn Andersson
Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: qcom: apq8064: Add riva-pil nodeBjorn Andersson
Add nodes for the Riva PIL, IRIS RF module, BT and WiFI services exposed by the Riva firmware and the related memory reserve. Also provides pinctrl nodes for devices enabling the riva-pil. Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: apq8064: add support to pm8821Srinivas Kandagatla
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13arm: dts: qcom: Fix ipq board clock ratesStephen Boyd
The ipq board has these rates as 25MHz, and not 19.2 and 27. I copy/pasted from other boards that have those rates but forgot to fix the rates here. Fixes: 30fc4212d541 ("arm: dts: qcom: Add more board clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: msm8974: Remove "unused" reserved regionStephen Boyd
sources for msm8974, this isn't actually a reserved region. Instead it's marked as "unused" for reserved regions. Let's remove it so we get back a good chunk of memory. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: msm8974: Add ADSP PIL nodeBjorn Andersson
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: msm8974: Add ADSP smp2p and smd nodesBjorn Andersson
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13ARM: dts: qcom: msm8974: Add USB gadget nodesBjorn Andersson
Add the necessary nodes for USB gadget on MSM8974 and enable these for Honami. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-13arm: dts: mt2701: Add auxadc device node.Zhiyong Tao
Add auxadc device node for MT2701. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-01-13arm: dts: mt2701: Add nand device nodeXiaolei Li
Add mt2701 nand device node, include nfi and bch ecc. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-01-13arm: dts: mt2701: Add spi device nodeLeilk Liu
Add spi device node for MT2701. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-01-13ARM: dts: mt2701: add iommu/smi dtsi node for mt2701Honghui Zhang
Add the dtsi node of iommu and smi for mt2701. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-01-13ARM: dts: mediatek: update my email addressJohn Crispin
This patch updates my email address as I no longer have access to the old one. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-01-13arm: dts: mt2701: Add power domain controller device nodeJames Liao
Add power domain controller node (scpsys) for MT2701. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-01-13arm: dts: mt2701: Add subsystem clock controller device nodesJames Liao
Add MT2701 subsystem clock controllers, inlcude mmsys, imgsys, vdecsys, hifsys, ethsys and bdpsys. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-01-13arm: dts: mt2701: Sort DT nodes by register addressJames Liao
This patch rearrange MT2701 DT nodes to keep them in ascending order. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> [mb: fix pio unit address and order] Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-01-13ARM: dts: da850: Add ti,da830-uart compatible for serial portsDavid Lechner
TI DA8xx/OMAPL13x/AM17xx/AM18xx SoCs have extra UART registers beyond the standard 8250 registers, so we need a new compatible string to indicate this. Also, at least one of these registers uses the full 32 bits, so we need to specify reg-io-width in addition to reg-shift. "ns16550a" is left in the compatible specification since it does work as long as the bootloader configures the SoC UART power management registers. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-12ARM: dts: omap3-igep: Remove NAND partition tableLadislav Michl
FDT harcoded partition table does not match that one in historical TI's 2.6.37 kernel and non legacy kernels even use different ECC scheme, yet noone complained, so remove it altogether. Also, UBI volumes instead of partitions are used since u-boot-2016.09. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-12ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to ↵Grygorii Strashko
10/100 Mbps" According to errata i880 description the speed of Ethernet port 1 on AM572x SoCs rev 1.1 should be limited to 10/100Mbps, because RGMII2 Switching Characteristics are not compatible with 1000 Mbps operation [1]. The issue is fixed with Rev 2.0 silicon. Hence, rework Beagle-X15 and Begale-X15-revb1 to use phy-handle instead of phy_id and apply corresponding limitation to the Ethernet Phy 1. [1] http://www.ti.com/lit/er/sprz429j/sprz429j.pdf Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-12ARM: dts: am335x-phycore-som: Remove partition tablesTeresa Remmet
As the bootloader passes the NAND and the SPI flash partition tables there is no need to keep them in the kernel device tree. Removed them. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-12ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth physGrygorii Strashko
TI DRA72-EVM Rev C has two DP83867 ethernet phys which support IRQ generation in case of phy/link status changes. The INT/PWDN lines from both DP83867 phys are wired to DRA7 gpio6.16, so reflect the same in DT. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-12ARM: dts: Configure BeagleBone peripheral USB VBUS irqTony Lindgren
This prevents having to poll peripheral USB port cable status. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-12ARM: dts: STiH407-family: Supply Mailbox properties to delta RProcPatrice Chotard
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-01-12ARM: dts: STiH407-family: Supply mailbox properties to GP0 RProcPatrice Chotard
Signed-off-by: Loic Pallardy <loic.pallardy.chotard@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-01-12ARM: dts: STiH407-family: update dmu remoteproc nodePatrice Chotard
Rename dmu_reserved to delta_reserved Rename st231_dmu to st231_delta Update the delta_reserved memory region start address Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 20:49:19 +0000