summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-18igb: Mask off check of frag_off as we only want fragment offsetAlexander Duyck
We were incorrectly checking the entire frag_off field when we only wanted the fragment offset. As a result we were not pulling in TCP headers when the DNF flag was set. To correct that we will now check for frag off using the IP_OFFSET mask. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18igb: random code and comments fixAkeem G. Abodunrin
This patch fixes code and comments as identified in the driver. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18igb: Implement support to power sfp cage and turn on I2CAkeem G. Abodunrin
Based on original patch from Aurélien Guillaume <footplus@gmail.com> This patch adds support to turn on I2C, with sfp cage powered. CC: Aurélien Guillaume <footplus@gmail.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18igb: Support to read and export SFF-8472/8079 dataAkeem G. Abodunrin
This patch adds support to read and export SFF-8472/8079 (SFP data) over i2c, through Ethtool. v2: Changed implementation to accommodate any offset within SFF module length boundary. Reported-by: Aurélien Guillaume <footplus@gmail.com> CC: Aurélien Guillaume <footplus@gmail.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-19nl80211: allow using wdev identifiers to get scan resultsJohannes Berg
Most dump callbacks, including the scan results one, use the netdev to identify what to do, which is incorrect for the P2P_DEVICE support, it needs to be able to get the scan result from the wdev. Change all dumps to unify the code, but ones other than scan don't really support being executed on a wdev that has no netdev. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-19netfilter: xt_rpfilter: depend on raw or mangle tableFlorian Westphal
rpfilter is only valid in raw/mangle PREROUTING, i.e. RPFILTER=y|m is useless without raw or mangle table support. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-18Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver revert from Matthew Garrett: "It turns out that one of the hp-wmi patches this cycle breaks some other HP laptops. I think we have a good idea how to work on it for 3.10, but it's safer to just revert it for now." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: Revert "hp-wmi: Add support for SMBus hotkeys"
2013-04-19netfilter: xt_rpfilter: skip locally generated broadcast/multicast, tooFlorian Westphal
Alex Efros reported rpfilter module doesn't match following packets: IN=br.qemu SRC=192.168.2.1 DST=192.168.2.255 [ .. ] (netfilter bugzilla #814). Problem is that network stack arranges for the locally generated broadcasts to appear on the interface they were sent out, so the IFF_LOOPBACK check doesn't trigger. As -m rpfilter is restricted to PREROUTING, we can check for existing rtable instead, it catches locally-generated broad/multicast case, too. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-18Revert "hp-wmi: Add support for SMBus hotkeys"Matthew Garrett
This reverts commit fabf85e3ca15d5b94058f391dac8df870cdd427a which breaks hotkey support on some other HP laptops. We'll try doing this differently in 3.10. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-04-18mac80211: fix P2P-Device management frame RXJohannes Berg
There's an issue in receiving broadcast management frames on P2P Device virtual interfaces, such frames have the RX flag IEEE80211_RX_RA_MATCH cleared and are thus dropped in ieee80211_rx_h_mgmt_check(). They should be let through to make it to ieee80211_rx_h_userspace_mgmt() and then to userspace. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-18netfilter: ipset: bitmap:ip,mac: fix listing with timeoutJozsef Kadlecsik
The type when timeout support was enabled, could not list all elements, just the first ones which could fit into one netlink message: it just did not continue listing after the first message. Reported-by: Yoann JUET <yoann.juet@univ-nantes.fr> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Tested-by: Yoann JUET <yoann.juet@univ-nantes.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-18igb: Support for 100base-fx SFPAkeem G. Abodunrin
This patch adds support for 100base-fx SFP and report proper link speed/duplex via Ethtool. v2: fix smatch warnings CC: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18ixgbe: Remove unnecessary #ifdef CONFIG_DEBUG_FS testsJoe Perches
Add some empty static inlines instead to make the code more readable. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18ixgbe: Add support for WoL on 82599 SFP+ LOMJacob Keller
This patch adds software support for WoL for the 82599 SFP+ LOM device, (ID 0x8976) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18ixgbe: in shutdown, do netif_running() under rtnl_lockakepner
During shutdown it's possible for __dev_close() (which holds rtnl_lock) to clear the __LINK_STATE_START bit, and for ixgbe to then read that bit (without holding rtnl_lock), and then not fail to free irqs, etc. The result is a crash like this: ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:313! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map CPU 1 Pid: 5910, comm: reboot Tainted: P ---------------- 2.6.32 #1 empty RIP: 0010:[<ffffffff81305c2b>] [<ffffffff81305c2b>] free_msi_irqs+0x11b/0x130 RSP: 0018:ffff880185c9bc88 EFLAGS: 00010282 RAX: ffff880219f58bc0 RBX: ffff88021ac53b00 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000246 RDI: 000000000000004a RBP: ffff880185c9bcc8 R08: 0000000000000002 R09: 0000000000000106 R10: 0000000000000000 R11: 0000000000000006 R12: ffff88021e524778 R13: 0000000000000001 R14: ffff88021e524000 R15: 0000000000000000 FS: 00007f90821b7700(0000) GS:ffff880028220000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f90818bd010 CR3: 0000000132c64000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process reboot (pid: 5910, threadinfo ffff880185c9a000, task ffff88021bf04a80) Stack: ffff880185c9bc98 000000018130529d ffff880185c9bcc8 ffff88021e524000 <0> 0000000000000004 ffff88021948c700 0000000000000000 ffff880185c9bda7 <0> ffff880185c9bce8 ffffffff81305cbd ffff880185c9bce8 ffff88021948c700 Call Trace: [<ffffffff81305cbd>] pci_disable_msix+0x3d/0x50 [<ffffffffa00501d5>] ixgbe_reset_interrupt_capability+0x65/0x90 [ixgbe] [<ffffffffa00512f6>] ixgbe_clear_interrupt_scheme+0xb6/0xd0 [ixgbe] [<ffffffffa005330b>] __ixgbe_shutdown+0x5b/0x200 [ixgbe] [<ffffffffa00534ca>] ixgbe_shutdown+0x1a/0x60 [ixgbe] [<ffffffff812f6c7c>] pci_device_shutdown+0x2c/0x50 [<ffffffff813727fb>] device_shutdown+0x4b/0x160 [<ffffffff8107d98c>] kernel_restart_prepare+0x2c/0x40 ehci timer_action, mod_timer io_watchdog [<ffffffff8107d9e6>] kernel_restart+0x16/0x60 [<ffffffff8107dbfd>] sys_reboot+0x1ad/0x200 [<ffffffff811676cf>] ? __d_free+0x3f/0x60 [<ffffffff81167748>] ? d_free+0x58/0x60 [<ffffffff8116f7c0>] ? mntput_no_expire+0x30/0x100 [<ffffffff81152b11>] ? __fput+0x191/0x200 [<ffffffff816565fe>] ? do_page_fault+0x3e/0xa0 [<ffffffff8100b132>] system_call_fastpath+0x16/0x1b Code: 4c 89 ef e8 98 8c e3 ff 4d 39 f4 48 8b 43 10 75 cf 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f c9 c3 49 8b 7d 20 e8 07 5a d3 ff eb c9 <0f> 0b 0f 1f 00 eb fb 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 ehci timer_action, mod_timer io_watchdog RIP [<ffffffff81305c2b>] free_msi_irqs+0x11b/0x130 RSP <ffff880185c9bc88> ---[ end trace 27de882a0fe75593 ]--- (This was seen on a pretty old kernel/driver, but looks like the same bug is still possible.) Signed-off-by: <akepner@riverbed.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18bonding: fix l23 and l34 load balancing in forwarding pathEric Dumazet
Since commit 6b923cb7188d46 (bonding: support for IPv6 transmit hashing) bonding doesn't properly hash traffic in forwarding setups. Vitaly V. Bursov diagnosed that skb_network_header_len() returned 0 in this case. More generally, the transport header might not be in the skb head. Use pskb_may_pull() & skb_header_pointer() to get it right, and use proto_ports_offset() in bond_xmit_hash_policy_l34() to get support for more protocols than TCP and UDP. Reported-by: Vitaly V. Bursov <vitalyb@telenet.dn.ua> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: John Eaglesham <linux@8192.net> Tested-by: Vitaly V. Bursov <vitalyb@telenet.dn.ua> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18bnx2x: Fix status blocks configurationAriel Elior
This fixes 2 issues regarding bnx2x's status blocks: 1. ethtool -c caused corruption of status blocks in FW RAM. 2. when using multi-CoS, the configuration of the timeout values of status blocks is incorrect, harming the coalescing of interrupts for such CoSs. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18bnx2x: Prevent UNDI FW illegal host accessDmitry Kravkov
When loading after UNDI (e.g., Boot from SAN) the UNDI does not gracefully yield its resources; The bnx2x driver handles that release itself. During the manipulation required to release those resources, it's possible for the UNDI to try and write to memory regions which are no longer accessible, causing the PCI bus to prevent further writes from the chip. This would in turn cause DMAE timeouts later on in the driver, as the driver will be unable to use the chip's DMA engines. This patch prevents the chip from actually writing through the PCI bus in said scenario, thus allowing the release without the unfortunate by-product. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-04-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to ixgbe only. v2- Dropped the following 2 patches from the series: ixgbe: Support using build_skb in the case that jumbo frames are disabled ixgbe: walk pci-e bus to find minimum width Ben Hutchings found a bug with Alex's patch, so that patch was dropped permanently. Jacob's "walk PCIe bus" patch is being re-worked for a more generic solution so that other drivers can benefit. In the remaining patches... Alex provides a fix where we were incorrectly checking the entire frag_off field when we only wanted the fragment offset. Alex also cleans up the check for PAGE_SIZE, since the default configuration allocates 32K for all buffers. Emil provides a change to the calculation of eerd so that it is consistent between the read and write functions by using | instead of +. Jacob adds support for displaying PCIe Gen3 link speed, which was previously missing from the ixgbe driver. He also provides a patch to clean up ixgbe_get_bus_info_generic to call some conversion functions, which are used also in another patch provided by Jacob. Jacob modifies the driver to enable certain devices (which have an internal switch) to read from the physical slot rather than reading data from the internal switch. Don provides a couple of fixes (which are more appropriate for net-next), one of which resolves an issue where ixgbe was only turning on the laser when the adapter was up which caused issues for those who wanted to access the MNG firmware while the port was in a down state. The other fix is for WoL when currently linked at 1G. Lastly Don bumps the driver version keep the in-kernel driver up to date with the current functionality. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18tcp: introduce TCPSpuriousRtxHostQueues SNMP counterEric Dumazet
Host queues (Qdisc + NIC) can hold packets so long that TCP can eventually retransmit a packet before the first transmit even left the host. Its not clear right now if we could avoid this in the first place : - We could arm RTO timer not at the time we enqueue packets, but at the time we TX complete them (tcp_wfree()) - Cancel the sending of the new copy of the packet if prior one is still in queue. This patch adds instrumentation so that we can at least see how often this problem happens. TCPSpuriousRtxHostQueues SNMP counter is incremented every time we detect the fast clone is not yet freed in tcp_transmit_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18fec: Remove unneeded asm header filesFabio Estevam
There is nothing in the driver that requires <asm/coldfire.h> and <asm/mcfsim.h>. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18Merge branch 'qlogic'David S. Miller
Shahed Shaikh says: ==================== This patch series contains bug fixes for - * Loopback test failure while traffic is running. * Tx timeout and subsequent firmware reset by removing check for '(adapter->netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)' from tx fast path, as per Eric's suggestion. * Typo in logs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18qlcnic: Fix typo in logsShahed Shaikh
o Debug logs were not matching with code functionality. o Changed dev_info to netdev_err Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18qlcnic: fix TSO race conditionSritej Velaga
When driver receives a packet with gso size > 0 and when TSO is disabled, it should be transmitted as a TSO packet to prevent Tx timeout and subsequent firmware reset. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18qlcnic: Stop traffic before performing loopback testJitendra Kalsaria
Before conducting loopback test by sending packets, driver should stop transmit queue and turn off carrier. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18ixgbe: Fix a bug in setting VF VLAN via PFGreg Rose
The PF driver does not check if the administrator has already set a VF VLAN via the PF driver before setting the new VLAN. This results in the following scenario: A) Administrator sets VF <n> to VLAN 100 B) Administrator sets VF <x> to VLAN 100 C) Administrator sets VF <n> to VLAN 200 D) The VF <n> driver continues to be able to receive traffic on VLAN 100 because the VLVFB pool enable bit for that VF was left set instead of being cleared as it should be. This fix ensures that the old VLAN filter for VF <n> is first removed and the pool bit enable for VF <n> is cleared so that it no longer receives traffic on VLAN 100. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18igb: Revert support for build_skb in igbAlexander Duyck
This patch actually reverts: igb: Support using build_skb in the case that jumbo frames are disabled The reason for reverting this patch is that it can lead to data corruption. The following flow was pointed out by Ben Hutchings: 1. skb is forwarded to another device 2. Packet headers are modified and it's put into a queue 3. Second packet is received into the other half of this page 4. Page cannot be reused, so is DMA-unmapped 5. The DMA mapping was non-coherent, so unmap copies or invalidates cache The headers added in step 2 get trashed in step 5. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Included changes: - fix MAC address check in case of multiple mesh interfaces Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18netfilter: add my copyright statementsPatrick McHardy
Add copyright statements to all netfilter files which have had significant changes done by myself in the past. Some notes: - nf_conntrack_ecache.c was incorrectly attributed to Rusty and Netfilter Core Team when it got split out of nf_conntrack_core.c. The copyrights even state a date which lies six years before it was written. It was written in 2005 by Harald and myself. - net/ipv{4,6}/netfilter.c, net/netfitler/nf_queue.c were missing copyright statements. I've added the copyright statement from net/netfilter/core.c, where this code originated - for nf_conntrack_proto_tcp.c I've also added Jozsef, since I didn't want it to give the wrong impression Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-18ARM: highbank: fix cache flush ordering for cpu hotplugRob Herring
The L1 data cache flush needs to be after highbank_set_cpu_jump call which pollutes the cache with the l2x0_lock. This causes other cores to deadlock waiting for the l2x0_lock. Moving the flush of the entire data cache after highbank_set_cpu_jump fixes the problem. Use flush_cache_louis instead of flush_cache_all are that is sufficient to flush only the L1 data cache. flush_cache_louis did not exist when highbank_cpu_die was originally written. With PL310 errata 769419 enabled, a wmb is inserted into idle which takes the l2x0_lock. This makes the problem much more easily hit and causes reset to hang. Reported-by: Paolo Pisati <p.pisati@gmail.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-18Revert "block: add missing block_bio_complete() tracepoint"Linus Torvalds
This reverts commit 3a366e614d0837d9fc23f78cdb1a1186ebc3387f. Wanlong Gao reports that it causes a kernel panic on his machine several minutes after boot. Reverting it removes the panic. Jens says: "It's not quite clear why that is yet, so I think we should just revert the commit for 3.9 final (which I'm assuming is pretty close). The wifi is crap at the LSF hotel, so sending this email instead of queueing up a revert and pull request." Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Requested-by: Jens Axboe <axboe@kernel.dk> Cc: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-18x86, hyperv: Handle Xen emulation of Hyper-V more gracefullyK. Y. Srinivasan
Install the Hyper-V specific interrupt handler only when needed. This would permit us to get rid of the Xen check. Note that when the vmbus drivers invokes the call to register its handler, we are sure to be running on Hyper-V. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Link: http://lkml.kernel.org/r/1366299886-6399-1-git-send-email-kys@microsoft.com Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-18kprobes: Fix a double lock bug of kprobe_mutexMasami Hiramatsu
Fix a double locking bug caused when debug.kprobe-optimization=0. While the proc_kprobes_optimization_handler locks kprobe_mutex, wait_for_kprobe_optimizer locks it again and that causes a double lock. To fix the bug, this introduces different mutex for protecting sysctl parameter and locks it in proc_kprobes_optimization_handler. Of course, since we need to lock kprobe_mutex when touching kprobes resources, that is done in *optimize_all_kprobes(). This bug was introduced by commit ad72b3bea744 ("kprobes: fix wait_for_kprobe_optimizer()") Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-18dmaengine: at_hdmac: fix race condition in atc_advance_work()Ludovic Desroches
The BUG_ON() directive is triggered probably due to a latency modification following inclusion of commit c10d73671ad3 ("softirq: reduce latencies"). This condition has not been met before 3.9-rc1 and doesn't trigger without this patch. We now make sure that DMA channel is idle before calling atc_complete_all() which makes the BUG_ON() "protection" useless. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17ixgbe: bump version numberDon Skidmore
Bump the version number reflect the corresponding functionality in the out of tree driver. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: Fix 1G link WoLDon Skidmore
We reset during the shutdown path which will reset AUTOC register. This would change LMS to 10G. If we were currently linked at 1G we will lose link, which is a bad thing if we wanted WoL to work. For the fix I needed to know if WoL is supported so I created a new bool in the ixgbe_hw struct. If this is set we will not allow the reset to change the current LMS value in AUTOC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: fix MNG FW support when adapter not upDon Skidmore
We were only turning the laser on when the adapter was up. This causes issues for those who wanted to access the MNG FW while the port was in a down state. This patch makes sure the laser is turned on in probe and remain up even after the port is brought down. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: enable devices with internal switch to read pci parentJacob Keller
This patch modifies the driver to enable certain devices, which have an internal switch, to read data from the physical slot rather than reading data from the internal switch. The internal switch will always report the same PCI width and speed, which is not useful compared to knowing the width and speed of the slot the physical card is plugged into. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: create conversion functions from link_status to bus/speedJacob Keller
This patch cleans up ixgbe_get_bus_info_generic to call some conversion functions, which are used also in a follow on patch that needs to convert between the link_status PCIe config values into ixgbe's internal enum representations. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: Enable support for recognizing PCI-e Gen3 link speedJacob Keller
This patch adds support for displaying PCIe Gen3 link speed, which was previously missing from the driver. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: Drop check for PAGE_SIZE from ixgbe_xmit_frame_ringAlexander Duyck
The check for PAGE_SIZE is pointless now that the default configuration is to allocate 32K for all buffers. Since the Tx descriptor limit is 16K we can just drop the check and always compare the descriptors to the maximum size supported. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-17ixgbe: don't do arithmetic operations on bitmasksEmil Tantilov
Make the calculation of eerd consistent between the read and write functions by using | instead of + for IXGBE_EEPROM_RW_REG_START Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18Merge branch 'fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== Two small bug fixes for net/3.9 including the issue previously discussed where allocation of netlink notifications can fail after changes have been committed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17ixgbe: Mask off check of frag_off as we only want fragment offsetAlexander Duyck
We were incorrectly checking the entire frag_off field when we only wanted the fragment offset. As a result we were not pulling in TCP headers when the DNF flag was set. To correct that we will now check for frag off using the IP_OFFSET mask. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18Bluetooth: Rename LE_SCANNING_* macrosAndre Guedes
This patch renames LE_SCANNING_ENABLED and LE_SCANNING_DISABLED macros to LE_SCAN_ENABLE and LE_SCAN_DISABLE in order to keep the same prefix others LE scan macros have. It also fixes le_scan_enable_req function so it uses the LE_SCAN_ ENABLE macro instead of a magic number. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-18Bluetooth: Add macros for filter duplicates valuesAndre Guedes
This patch adds macros for filter_duplicates parameter values from HCI LE Set Scan Enable command. It also fixes le_scan_enable_req function so it uses the LE_SCAN_FILTER_DUP_ENABLE macro instead of a magic number. The LE_SCAN_FILTER_DUP_DISABLE was also defined since it will be required to properly support the GAP Observer Role. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-18Bluetooth: Add LE scan type macrosAndre Guedes
This patch adds macros for active and passive LE scan type values. The LE_SCAN_PASSIVE was also defined since it will be used in future by LE connection routine and GAP Observer Role support. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-18Bluetooth: Change LE scanning timeout macrosAndre Guedes
Define LE scanning timeout macros in jiffies just like we do for others timeout macros. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-18Bluetooth: Add reading of all local feature pagesJohan Hedberg
With the introduction of CSA4 there is now also a features page number 2 available. This patch increments the maximum supported page number to 2 and adds code for reading all available pages (as long as we have support for them - indicated by HCI_MAX_PAGES). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 13:09:41 +0000