summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-20net: stmmac: dma channel control register need to be init firstWeifeng Voon
stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and stmmac_init_tx_chan(). This is because if PBLx8 is to be used, "DMA_CH(#i)_Control.PBLx8" needs to be set before programming "DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL". Fixes: 47f2a9ce527a ("net: stmmac: dma channel init prepared for multiple queues") Reviewed-by: Zhang, Baoli <baoli.zhang@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Weifeng Voon <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20net: stmmac: fix ethtool flow control not able to get/setTan, Tee Min
Currently ethtool was not able to get/set the flow control due to a missing "!". It will always return -EOPNOTSUPP even the device is flow control supported. This patch fixes the condition check for ethtool flow control get/set function for ETHTOOL_LINK_MODE_Asym_Pause_BIT. Fixes: 3c1bcc8614db (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”) Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20net: qrtr: Fix message type of outgoing packetsBjorn Andersson
QRTR packets has a message type in the header, which is repeated in the control header. For control packets we therefor copy the type from beginning of the outgoing payload and use that as message type. For non-control messages an endianness fix introduced in v5.2-rc1 caused the type to be 0, rather than QRTR_TYPE_DATA, causing all messages to be dropped by the receiver. Fix this by converting and using qrtr_type, which will remain QRTR_TYPE_DATA for non-control messages. Fixes: 8f5e24514cbd ("net: qrtr: use protocol endiannes variable") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20networking: : fix typos in code commentsWeitao Hou
fix accelleration to acceleration Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20ptp: Fix example program to match kernel.Richard Cochran
Ever since commit 3a06c7ac24f9 ("posix-clocks: Remove interval timer facility and mmap/fasync callbacks") the possibility of PHC based posix timers has been removed. In addition it will probably never make sense to implement this functionality. This patch removes the misleading example code which seems to suggest that posix timers for PHC devices will ever be a thing. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20Merge tag 'kbuild-fixes-v5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - remove unused cc-ldoption - do not check the name uniquness of builtin modules to avoid false positives * tag 'kbuild-fixes-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: do not check name uniqueness of builtin modules kbuild: drop support for cc-ldoption
2019-05-20fddi: fix typos in code commentsWeitao Hou
fix abord to abort Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20Merge branch 'kselftests-fib_rule_tests-fix'David S. Miller
Hangbin Liu says: ==================== kselftests: fib_rule_tests: fix "from $SRC_IP iif $DEV" match testing As all the IPv4 testing addresses are in the same subnet and egress device == ingress device, to pass "from $SRC_IP iif $DEV" match test, we need enable forwarding to get the route entry. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20selftests: fib_rule_tests: enable forwarding before ipv4 from/iif testHangbin Liu
As all the testing addresses are in the same subnet and egress device == ingress device. We need enable forwarding to get the route entry. Also disable rp_filer separately as some distributions enable it in startup scripts. Fixes: 65b2b4939a64 ("selftests: net: initial fib rule tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20selftests: fib_rule_tests: fix local IPv4 address typoHangbin Liu
The IPv4 testing address are all in 192.51.100.0 subnet. It doesn't make sense to set a 198.51.100.1 local address. Should be a typo. Fixes: 65b2b4939a64 ("selftests: net: initial fib rule tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20tipc: Avoid copying bytes beyond the supplied dataChris Packham
TLV_SET is called with a data pointer and a len parameter that tells us how many bytes are pointed to by data. When invoking memcpy() we need to careful to only copy len bytes. Previously we would copy TLV_LENGTH(len) bytes which would copy an extra 4 bytes past the end of the data pointer which newer GCC versions complain about. In file included from test.c:17: In function 'TLV_SET', inlined from 'test' at test.c:186:5: /usr/include/linux/tipc_config.h:317:3: warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32] of object 'bearer_name' with type 'char[32]' [-Warray-bounds] memcpy(TLV_DATA(tlv_ptr), data, tlv_len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ test.c: In function 'test': test.c::161:10: note: 'bearer_name' declared here char bearer_name[TIPC_MAX_BEARER_NAME]; ^~~~~~~~~~~ We still want to ensure any padding bytes at the end are initialised, do this with a explicit memset() rather than copy bytes past the end of data. Apply the same logic to TCM_SET. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20Merge branch 'net-readx_poll_timeout'David S. Miller
Benedikt Spranger says: ==================== Convert mdio wait function to use readx_poll_timeout() On loaded systems with a preemptible kernel both functions axienet_mdio_wait_until_ready() and xemaclite_mdio_wait() may report a false positive error return. Convert both functions to use readx_poll_timeout() to handle the situation in a safe manner. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-202/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait functionKurt Kanzenbach
On loaded systems with a preemptible kernel the mdio_wait() function may report an error while everything is working fine: xemaclite_mdio_wait(): xemaclite_readl() -> chip not ready --> interrupt here (other work for some time / chip become ready) if (time_before_eq(end, jiffies)) --> false positive error report Replace the current code with readx_poll_timeout() which takes care of the situation. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-201/2] net: axienet: use readx_poll_timeout() in mdio wait functionKurt Kanzenbach
On loaded systems with a preemptible kernel the mdio_wait() function may report an error while everything is working fine: axienet_mdio_wait_until_ready(): axienet_ior() -> chip not ready --> interrupt here (other work for some time / chip become ready) if (time_before_eq(end, jiffies)) --> false positive error report Replace the current code with readx_poll_timeout() which take care of the situation. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21kbuild: do not check name uniqueness of builtin modulesMasahiro Yamada
I just thought it was a good idea to scan builtin.modules in the name uniqueness checking, but a couple of false positives were found. Stephen reported a false positive for ppc64_defconfig: warning: same basename if the following are built as modules: arch/powerpc/platforms/powermac/nvram.ko drivers/char/nvram.ko The former is never built as a module as you see in arch/powerpc/platforms/powermac/Makefile: # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really # need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really # CONFIG_NVRAM=y obj-$(CONFIG_NVRAM:m=y) += nvram.o Another example of false positive is arm64 defconfig: warning: same basename if the following are built as modules: arch/arm64/lib/crc32.ko lib/crc32.ko It is true CONFIG_CRC32 is a tristate option but it is always 'y' since it is select'ed by ARM64. Hence, neither of them is built as a module for the arm64 build. From the above, modules.builtin essentially contains false positives. I do not think it is a big deal as far as kmod is concerned, but false positive warnings in the kernel build make people upset. It is better to not check it. Even without builtin.modules checked, we have enough (and more solid) test coverage with allmodconfig. While I touched this part, I replaced the sed code with neater one provided by Stephen. Link: https://lkml.org/lkml/2019/5/19/120 Link: https://lkml.org/lkml/2019/5/19/123 Fixes: 3a48a91901c5 ("kbuild: check uniqueness of module names") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20dax: Arrange for dax_supported check to span multiple devicesDan Williams
Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-20libnvdimm: Fix compilation warnings with W=1Qian Cai
Several places (dimm_devs.c, core.c etc) include label.h but only label.c uses NSINDEX_SIGNATURE, so move its definition to label.c instead. In file included from drivers/nvdimm/dimm_devs.c:23: drivers/nvdimm/label.h:41:19: warning: 'NSINDEX_SIGNATURE' defined but not used [-Wunused-const-variable=] Also, some places abuse "/**" which is only reserved for the kernel-doc. drivers/nvdimm/bus.c:648: warning: cannot understand function prototype: 'struct attribute_group nd_device_attribute_group = ' drivers/nvdimm/bus.c:677: warning: cannot understand function prototype: 'struct attribute_group nd_numa_attribute_group = ' Those are just some member assignments for the "struct attribute_group" instances and it can't be expressed in the kernel-doc. Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-20scripts/spdxcheck.py: Fix path to deprecated licensesSven Eckelmann
The directory name for other licenses was changed to "deprecated" in commit 62be257e986d ("LICENSES: Rename other to deprecated"). But it was not changed for spdxcheck.py. As result, checkpatch failed with FAIL: "Blob or Tree named 'other' not found" Traceback (most recent call last): File "scripts/spdxcheck.py", line 240, in <module> spdx = read_spdxdata(repo) File "scripts/spdxcheck.py", line 41, in read_spdxdata for el in lictree[d].traverse(): File "/usr/lib/python2.7/dist-packages/git/objects/tree.py", line 298, in __getitem__ return self.join(item) File "/usr/lib/python2.7/dist-packages/git/objects/tree.py", line 244, in join raise KeyError(msg % file) KeyError: "Blob or Tree named 'other' not found" Fixes: 62be257e986d ("LICENSES: Rename other to deprecated") Signed-off-by: Sven Eckelmann <sven@narfation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-20counter: fix Documentation build error due to incorrect source file nameRandy Dunlap
Fix kernel-doc build error in Documentation/driver-api/generic-counter.rst of incorrect source file name. Fixes this warning and error: Error: Cannot open file ../drivers/counter/generic-counter.c WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -export ../drivers/counter/generic-counter.c' failed with return code 2 Fixes: 09e7d4ed8991 ("docs: Add Generic Counter interface documentation") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-20vlan: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: net/8021q/vlan_dev.c: In function ‘vlan_dev_ioctl’: net/8021q/vlan_dev.c:374:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!net_eq(dev_net(dev), &init_net)) ^ net/8021q/vlan_dev.c:376:2: note: here case SIOCGMIIPHY: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20macvlan: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/macvlan.c: In function ‘macvlan_do_ioctl’: drivers/net/macvlan.c:839:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!net_eq(dev_net(dev), &init_net)) ^ drivers/net/macvlan.c:841:2: note: here case SIOCGHWTSTAMP: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages queryErez Alfasi
Querying EEPROM high pages data for SFP module is currently not supported by our driver but is still tried, resulting in invalid FW queries. Set the EEPROM ethtool data length to 256 for SFP module to limit the reading for page 0 only and prevent invalid FW queries. Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20xfs: don't reserve per-AG space for an internal logDarrick J. Wong
It turns out that the log can consume nearly all the space in an AG, and when this happens this it's possible that there will be less free space in the AG than the reservation would try to hide. On a debug kernel this can trigger an ASSERT in xfs/250: XFS: Assertion failed: xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= pag->pagf_freeblks + pag->pagf_flcount, file: fs/xfs/libxfs/xfs_ag_resv.c, line: 319 The log is permanently allocated, so we know we're never going to have to expand the btrees to hold any records associated with the log space. We therefore can treat the space as if it doesn't exist. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2019-05-20drm/amdgpu: skip fw pri bo alloc for SRIOVYintian Tao
PSP fw primary buffer is not used under SRIOV. Under SRIOV, VBIOS or hypervisor driver will load psp sos and psp sysdrv. Therefore, we don't need to allocate memory for it. v2: remove superfluous check for amdgpu_bo_free_kernel(). Signed-off-by: Yintian Tao <yttao@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-20drm/amd/powerplay: fix locking in smu_feature_set_supported()Dan Carpenter
There is a typo so the code unlocks twice instead of taking the lock and then releasing it. Fixes: f14a323db5b0 ("drm/amd/powerplay: implement update enabled feature state to smc for smu11") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-20drm/amdgpu/gmc9: set vram_width properly for SR-IOVAlex Deucher
For SR-IOV, vram_width can't be read from ATOM as RAVEN, and DF related registers is not readable, so hardcord is the only way to set the correct vram_width. Reviewed-by: Yintian Tao <yttao@amd.com> Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Signed-off-by: Yintian Tao <yttao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-20drm/amdgpu/soc15: skip reset on initAlex Deucher
Not necessary on soc15 and breaks driver reload on server cards. Acked-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-05-20drm/amdgpu: keep stolen memory on picassoFlora Cui
otherwise screen corrupts during modprobe. Signed-off-by: Flora Cui <flora.cui@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-20tipc: fix modprobe tipc failed after switch order of device registrationJunwei Hu
Error message printed: modprobe: ERROR: could not insert 'tipc': Address family not supported by protocol. when modprobe tipc after the following patch: switch order of device registration, commit 7e27e8d6130c ("tipc: switch order of device registration to fix a crash") Because sock_create_kern(net, AF_TIPC, ...) called by tipc_topsrv_create_listener() in the initialization process of tipc_init_net(), so tipc_socket_init() must be execute before that. Meanwhile, tipc_net_id need to be initialized when sock_create() called, and tipc_socket_init() is no need to be called for each namespace. I add a variable tipc_topsrv_net_ops, and split the register_pernet_subsys() of tipc into two parts, and split tipc_socket_init() with initialization of pernet params. By the way, I fixed resources rollback error when tipc_bcast_init() failed in tipc_init_net(). Fixes: 7e27e8d6130c ("tipc: switch order of device registration to fix a crash") Signed-off-by: Junwei Hu <hujunwei4@huawei.com> Reported-by: Wang Wang <wangwang2@huawei.com> Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com Reviewed-by: Kang Zhou <zhoukang7@huawei.com> Reviewed-by: Suanming Mou <mousuanming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20drm/amdkfd: Add missing Polaris10 IDKent Russell
This was added to amdgpu but was missed in amdkfd Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.rg
2019-05-20drm/amd/display: Don't load DMCU for Raven 1Harry Wentland
[WHY] Some early Raven boards had a bad SBIOS that doesn't play nicely with the DMCU FW. We thought the issues were fixed by ignoring errors on DMCU load but that doesn't seem to be the case. We've still seen reports of users unable to boot their systems at all. [HOW] Disable DMCU load on Raven 1. Only load it for Raven 2 and Picasso. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-05-20drm/amd/display: Add ASICREV_IS_PICASSOHarry Wentland
[WHY] We only want to load DMCU FW on Picasso and Raven 2, not on Raven 1. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-05-20Merge tag 'for-5.2-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Notable highlights: - fixes for some long-standing bugs in fsync that were quite hard to catch but now finaly fixed - some fixups to error handling paths that did not properly clean up (locking, memory) - fix to space reservation for inheriting properties" * tag 'for-5.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: tree-checker: detect file extent items with overlapping ranges Btrfs: fix race between ranged fsync and writeback of adjacent ranges Btrfs: avoid fallback to transaction commit during fsync of files with holes btrfs: extent-tree: Fix a bug that btrfs is unable to add pinned bytes btrfs: sysfs: don't leak memory when failing add fsid btrfs: sysfs: Fix error path kobject memory leak Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path btrfs: use the existing reserved items for our first prop for inheritance btrfs: don't double unlock on error in btrfs_punch_hole btrfs: Check the compression level before getting a workspace
2019-05-20drm/i915: Truly bump ready tasks ahead of busywaitsChris Wilson
In commit b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits"), I tried cutting a corner in order to not install a signal for each of our dependencies, and only listened to requests on which we were intending to busywait. The compromise that was made was that instead of then being able to promote the request with a full NOSEMAPHORE like its non-busywaiting brethren, as we had not ensured we had cleared the semaphore chain, we settled for only using the NEWCLIENT boost. With an over saturated system with multiple NEWCLIENTS in flight at any time, this was found to be an inadequate promotion and left us with a much poorer scheduling order than prior to using semaphores. The outcome of this patch, is that all requests have NOSEMAPHORE priority when they have no dependencies and are ready to run and not busywait, restoring the pre-semaphore ordering on saturated systems. We can demonstrate the effect of poor scheduling order by oversaturating the system using gem_wsim on a system with multiple vcs engines (i.e running the same workloads across more clients than required for peak throughput, e.g. media_load_balance_17i7.wsim -c4 -b context): x v5.1 (normalized) + tip * fix +------------------------------------------------------------------------+ | x | | x | | x | | x | | %x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %%x | | %#x | | %#x | | %#x | | %#x | | %#x | | + %#xx | | + %#xx | | + %%#xx | | + %%#xx | | + %%#xx | | + %%#xx | | + %%##x | | +++ %%##x | | +++ %%##x | | +++ %%##x | | ++++ %%##x | | ++++ %%##x | | ++++ %%##xx | | ++++ %###xx | | ++++ %###xx | | ++++ %###xx | | ++++ %###xx | | ++++ + %#O#xx | | ++++ + %#O#xx | | ++++++ + %#O#xx | | ++++++++++ %OOOxxx| | ++++++++++ + %#OOO#xx| | + ++++++++++++ ++ +++++ + ++ @@OOOO#xx| | |A_| | ||__________M_______A____________________| | | |A_| | +------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 120 0.99456 1.00628 0.999985 1.0001545 0.0024387139 + 120 0.873021 1.00037 0.884134 0.90148752 0.039190862 Difference at 99.5% confidence -0.098667 +/- 0.0110762 -9.86517% +/- 1.10745% (Student's t, pooled s = 0.0277657) % 120 0.990207 1.00165 0.9970265 0.99699748 0.0021024 Difference at 99.5% confidence -0.003157 +/- 0.000908245 -0.315651% +/- 0.0908105% (Student's t, pooled s = 0.00227678) Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Dmitry Ermilov <dmitry.ermilov@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-2-chris@chris-wilson.co.uk (cherry picked from commit 17db337f5098d29415314c4a588b842fc684394b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20drm/i915: Downgrade NEWCLIENT to non-preemptiveChris Wilson
Commit 1413b2bc0717 ("drm/i915: Trim NEWCLIENT boosting") had the intended consequence of not allowing a sequence of work that merely crossed into a new engine the privilege to be promoted to NEWCLIENT status. It also had the unintended consequence of actually making NEWCLIENT effective on heavily oversubscribed transcode machines and impacting upon their throughput. If we consider a client packet composed of (rcsA, rcsB, vcs) and 30 of those clients, using the NEWCLIENT boost that will be scheduled as rcsA x 30, (rcsB, vcs) x 30 where as before it would have been (rcsA, rcsB, vcs) x 30 That is with NEWCLIENT only boosting the first request of each client, we would execute all rcsA requests prior to running on the vcs engines; acruing a lot of dead time as compared to the previous case where the vcs engine would be started in parallel to processing the second client. The previous patch has the effect of delaying submission until it is required by a third party (either the user with an explicit wait, or by another client/engine). We reduce the NEWCLIENT bump to a mere WAIT, which has the effect of removing its preemptive grant and reducing it to the same level as any other user interaction -- that it will not be promoted above the interengine dependencies, and so preventing NEWCLIENTS from starving other engines. This a large nerf to the rrul properties of the current NEWCLIENT, but it still does give prioritised submission to new requests from light workloads. References: b16c765122f9 ("drm/i915: Priority boost for new clients") Fixes: 1413b2bc0717 ("drm/i915: Trim NEWCLIENT boosting") # customer impact Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Dmitry Ermilov <dmitry.ermilov@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-4-chris@chris-wilson.co.uk (cherry picked from commit 68fc728b01fcc93b26d52f6e884e738962a49a66) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20drm/i915: Bump signaler priority on adding a waiterChris Wilson
The handling of the no-preemption priority level imposes the restriction that we need to maintain the implied ordering even though preemption is disabled. Otherwise we may end up with an AB-BA deadlock across multiple engine due to a real preemption event reordering the no-preemption WAITs. To resolve this issue we currently promote all requests to WAIT on unsubmission, however this interferes with the timeslicing requirement that we do not apply any implicit promotion that will defeat the round-robin timeslice list. (If we automatically promote the active request it will go back to the head of the queue and not the tail!) So we need implicit promotion to prevent reordering around semaphores where we are not allowed to preempt, and we must avoid implicit promotion on unsubmission. So instead of at unsubmit, if we apply that implicit promotion on adding the dependency, we avoid the semaphore deadlock and we also reduce the gains made by the promotion for user space waiting. Furthermore, by keeping the earlier dependencies at a higher level, we reduce the search space for timeslicing without altering runtime scheduling too badly (no dependencies at all will be assigned a higher priority for rrul). v2: Limit the bump to external edges (as originally intended) i.e. between contexts and out to the user. Testcase: igt/gem_concurrent_blit Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-3-chris@chris-wilson.co.uk (cherry picked from commit 6e7eb7a80769e7250e31652b96918cf7f3e0d285) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20drm/i915: Pass i915_sched_node around internallyChris Wilson
To simplify the next patch, update bump_priority and schedule to accept the internal i915_sched_ndoe directly and not expect a request pointer. add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7) Function old new delta i915_schedule_bump_priority 109 113 +4 i915_schedule 50 54 +4 __i915_schedule 922 907 -15 v2: Adopt node for the old rq local, since it no longer is a request but the origin node. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-2-chris@chris-wilson.co.uk (cherry picked from commit 52c76fb18a34fc08dd06f32b9fc83f1375f083ee) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20drm/i915: Rearrange i915_scheduler.cChris Wilson
To avoid pulling in a forward declaration in the next patch, move the i915_sched_node handling to after the main dfs of the scheduler. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-1-chris@chris-wilson.co.uk (cherry picked from commit 5ae87063c162679a61f2141041d0918cc3045daf) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet. 1) Use after free in __dev_map_entry_free(), from Eric Dumazet. 2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung Cheng. 3) Orphan NFC, we'll take the patches directly into my tree. From Johannes Berg. 4) We can't recycle cloned TCP skbs, from Eric Dumazet. 5) Some flow dissector bpf test fixes, from Stanislav Fomichev. 6) Fix RCU marking and warnings in rhashtable, from Herbert Xu. 7) Fix some potential fib6 leaks, from Eric Dumazet. 8) Fix a _decode_session4 uninitialized memory read bug fix that got lost in a merge. From Florian Westphal. 9) Fix ipv6 source address routing wrt. exception route entries, from Wei Wang. 10) The netdev_xmit_more() conversion was not done %100 properly in mlx5 driver, fix from Tariq Toukan. 11) Clean up botched merge on netfilter kselftest, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits) of_net: fix of_get_mac_address retval if compiled without CONFIG_OF net: fix kernel-doc warnings for socket.c net: Treat sock->sk_drops as an unsigned int when printing kselftests: netfilter: fix leftover net/net-next merge conflict mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM mlxsw: core: Prevent QSFP module initialization for old hardware vsock/virtio: Initialize core virtio vsock before registering the driver net/mlx5e: Fix possible modify header actions memory leak net/mlx5e: Fix no rewrite fields with the same match net/mlx5e: Additional check for flow destination comparison net/mlx5e: Add missing ethtool driver info for representors net/mlx5e: Fix number of vports for ingress ACL configuration net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled net/mlx5e: Fix wrong xmit_more application net/mlx5: Fix peer pf disable hca command net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index net/mlx5: Add meaningful return codes to status_to_err function net/mlx5: Imply MLXFW in mlx5_core Revert "tipc: fix modprobe tipc failed after switch order of device registration" vsock/virtio: free packets during the socket release ...
2019-05-21kbuild: drop support for cc-ldoptionNick Desaulniers
If you want to see if your linker supports a certain flag, then ask the linker directly with ld-option (not the compiler with cc-ldoption). Checking for linker flag support is an antipattern that complicates the usage of various linkers other than bfd via -fuse-ld={bfd|gold|lld}. Cc: clang-built-linux@googlegroups.com Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-20Merge drm-misc-next-fixes-2019-05-20 into drm-misc-fixesSean Paul
Picking up 3 sun4i patches that missed the last drm-misc-next-fixes pull request for 5.2 Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-05-20Revert "scsi: sd: Keep disk read-only when re-reading partition"Martin K. Petersen
This reverts commit 20bd1d026aacc5399464f8328f305985c493cde3. This patch introduced regressions for devices that come online in read-only state and subsequently switch to read-write. Given how the partition code is currently implemented it is not possible to persist the read-only flag across a device revalidate call. This may need to get addressed in the future since it is common for user applications to proactively call BLKRRPART. Reverting this commit will re-introduce a regression where a device-initiated revalidate event will cause the admin state to be forgotten. A separate patch will address this issue. Fixes: 20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition") Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-20scsi: bnx2fc: fix incorrect cast to u64 on shift operationColin Ian King
Currently an int is being shifted and the result is being cast to a u64 which leads to undefined behaviour if the shift is more than 31 bits. Fix this by casting the integer value 1 to u64 before the shift operation. Addresses-Coverity: ("Bad shift operation") Fixes: 7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-20scsi: smartpqi: Reporting unhandled SCSI errorsErwan Velu
When a HARDWARE_ERROR is triggered for ASC=0x3e, the existing code is only considering the case where ASCQ=0x1. According to the http://www.t10.org/lists/asc-num.htm#ASC_3E specification, other values may occur like a timeout (ASCQ=0x2). This patch prints an error message when a non-handled message is received. This can help diagnose a possible misbehavior of the controller or a missing implementation in the Linux kernel. This patch keeps the exact same error handling but prints a message if an ASCQ != 1 is reported. [mkp: clarified commit message] Signed-off-by: Erwan Velu <e.velu@criteo.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-20scsi: myrs: Fix uninitialized variableYueHaibing
drivers/scsi/myrs.c: In function 'myrs_log_event': drivers/scsi/myrs.c:821:24: warning: 'sshdr.sense_key' may be used uninitialized in this function [-Wmaybe-uninitialized] struct scsi_sense_hdr sshdr; If ev->ev_code is not 0x1C, sshdr.sense_key may be used uninitialized. Fix this by initializing variable 'sshdr' to 0. Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-20platform/x86: pmc_atom: Add several Beckhoff Automation boards to ↵Steffen Dirkwinkel
critclk_systems DMI table There are several Beckhoff Automation industrial PC boards which use pmc_plt_clk* clocks for ethernet controllers. This adds affected boards to critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and not turned off. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-05-20platform/x86: pmc_atom: Add Lex 3I380D industrial PC to critclk_systems DMI ↵Hans de Goede
table The Lex 3I380D industrial PC has 4 ethernet controllers on board which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks as CLK_CRITICAL and they will not get turned off. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reported-and-tested-by: Semyon Verchenko <semverchenko@factor-ts.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-05-20Merge tag 'kvm-s390-master-5.2-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes for s390 - Fix typo in module parameter description - Change default poll timer to improve cpu consumption
2019-05-20KVM: s390: change default halt poll time to 50usChristian Borntraeger
Recent measurements indicate that using 50us results in a reduced CPU consumption, while still providing the benefit of halt polling. Let's use 50us instead. Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-05-20KVM: s390: fix typo in parameter descriptionWei Yongjun
Fix typo in parameter description. Fixes: 8b905d28ee17 ("KVM: s390: provide kvm_arch_no_poll function") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Message-Id: <20190504065145.53665-1-weiyongjun1@huawei.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 17:15:30 +0000