summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-21KVM: selftests: evmcs_test: Introduce L2 TLB flush testVitaly Kuznetsov
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls from L2 don't exit to L1 unless 'TlbLockCount' is set in the Partition assist page. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-47-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-21KVM: selftests: Introduce rdmsr_from_l2() and use it for MSR-Bitmap testsVitaly Kuznetsov
Hyper-V MSR-Bitmap tests do RDMSR from L2 to exit to L1. While 'evmcs_test' correctly clobbers all GPRs (which are not preserved), 'hyperv_svm_test' does not. Introduce a more generic rdmsr_from_l2() to avoid code duplication and remove hardcoding of MSRs. Do not put it in common code because it is really just a selftests bug rather than a processor feature that requires it. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-46-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-21KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()Vitaly Kuznetsov
vmmcall()/vmcall() are used to exit from L2 to L1 and no concrete hypercall ABI is currenty followed. With the introduction of Hyper-V L2 TLB flush it becomes (theoretically) possible that L0 will take responsibility for handling the call and no L1 exit will happen. Prevent this by stuffing RAX (KVM ABI) and RCX (Hyper-V ABI) with 'safe' values. While on it, convert vmmcall() to 'static inline', make it setup stack frame and move to include/x86_64/svm_util.h. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-45-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-21KVM: selftests: Allocate Hyper-V partition assist pageVitaly Kuznetsov
In preparation to testing Hyper-V L2 TLB flush hypercalls, allocate so-called Partition assist page. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-44-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-21KVM: selftests: Create a vendor independent helper to allocate Hyper-V ↵Vitaly Kuznetsov
specific test pages There's no need to pollute VMX and SVM code with Hyper-V specific stuff and allocate Hyper-V specific test pages for all test as only few really need them. Create a dedicated struct and an allocation helper. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-43-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-21KVM: selftests: Split off load_evmcs() from load_vmcs()Vitaly Kuznetsov
In preparation to putting Hyper-V specific test pages to a dedicated struct, move eVMCS load logic from load_vmcs(). Tests call load_vmcs() directly and the only one which needs 'enlightened' version is evmcs_test so there's not much gain in having this merged. Temporary pass both GPA and HVA to load_evmcs(). Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-42-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-21KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.hVitaly Kuznetsov
Hyper-V VP assist page is not eVMCS specific, it is also used for enlightened nSVM. Move the code to vendor neutral place. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-41-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-21KVM: selftests: Sync 'struct hv_vp_assist_page' definition with hyperv-tlfs.hVitaly Kuznetsov
'struct hv_vp_assist_page' definition doesn't match TLFS. Also, define 'struct hv_nested_enlightenments_control' and use it instead of opaque '__u64'. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-40-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-21KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.hVitaly Kuznetsov
'struct hv_enlightened_vmcs' definition in selftests is not '__packed' and so we rely on the compiler doing the right padding. This is not obvious so it seems beneficial to use the same definition as in kernel. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-39-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-21KVM: selftests: Hyper-V PV TLB flush selftestVitaly Kuznetsov
Introduce a selftest for Hyper-V PV TLB flush hypercalls (HvFlushVirtualAddressSpace/HvFlushVirtualAddressSpaceEx, HvFlushVirtualAddressList/HvFlushVirtualAddressListEx). The test creates one 'sender' vCPU and two 'worker' vCPU which do busy loop reading from a certain GVA checking the observed value. Sender vCPU swaos the data page with another page filled with a different value. The expectation for workers is also altered. Without TLB flush on worker vCPUs, they may continue to observe old value. To guard against accidental TLB flushes for worker vCPUs the test is repeated 100 times. Hyper-V TLB flush hypercalls are tested in both 'normal' and 'XMM fast' modes. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-38-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-19KVM: arm64: PMU: Make kvm_pmc the main data structureMarc Zyngier
The PMU code has historically been torn between referencing a counter as a pair vcpu+index or as the PMC pointer. Given that it is pretty easy to go from one representation to the other, standardise on the latter which, IMHO, makes the code slightly more readable. YMMV. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221113163832.3154370-17-maz@kernel.org
2022-11-19KVM: arm64: PMU: Simplify vcpu computation on perf overflow notificationMarc Zyngier
The way we compute the target vcpu on getting an overflow is a bit odd, as we use the PMC array as an anchor for kvm_pmc_to_vcpu, while we could directly compute the correct address. Get rid of the intermediate step and directly compute the target vcpu. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221113163832.3154370-16-maz@kernel.org
2022-11-19KVM: arm64: PMU: Allow PMUv3p5 to be exposed to the guestMarc Zyngier
Now that the infrastructure is in place, bump the PMU support up to PMUv3p5. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221113163832.3154370-15-maz@kernel.org
2022-11-19KVM: arm64: PMU: Implement PMUv3p5 long counter supportMarc Zyngier
PMUv3p5 (which is mandatory with ARMv8.5) comes with some extra features: - All counters are 64bit - The overflow point is controlled by the PMCR_EL0.LP bit Add the required checks in the helpers that control counter width and overflow, as well as the sysreg handling for the LP bit. A new kvm_pmu_is_3p5() helper makes it easy to spot the PMUv3p5 specific handling. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221113163832.3154370-14-maz@kernel.org
2022-11-19KVM: arm64: PMU: Allow ID_DFR0_EL1.PerfMon to be set from userspaceMarc Zyngier
Allow userspace to write ID_DFR0_EL1, on the condition that only the PerfMon field can be altered and be something that is compatible with what was computed for the AArch64 view of the guest. Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221113163832.3154370-13-maz@kernel.org
2022-11-19KVM: arm64: PMU: Allow ID_AA64DFR0_EL1.PMUver to be set from userspaceMarc Zyngier
Allow userspace to write ID_AA64DFR0_EL1, on the condition that only the PMUver field can be altered and be at most the one that was initially computed for the guest. Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221113163832.3154370-12-maz@kernel.org
2022-11-19KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creationMarc Zyngier
As further patches will enable the selection of a PMU revision from userspace, sample the supported PMU revision at VM creation time, rather than building each time the ID_AA64DFR0_EL1 register is accessed. This shouldn't result in any change in behaviour. Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221113163832.3154370-11-maz@kernel.org
2022-11-19KVM: arm64: PMU: Do not let AArch32 change the counters' top 32 bitsMarc Zyngier
Even when using PMUv3p5 (which implies 64bit counters), there is no way for AArch32 to write to the top 32 bits of the counters. The only way to influence these bits (other than by counting events) is by writing PMCR.P==1. Make sure we obey the architecture and preserve the top 32 bits on a counter update. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221113163832.3154370-10-maz@kernel.org
2022-11-18KVM: selftests: Export vm_vaddr_unused_gap() to make it possible to request ↵Vitaly Kuznetsov
unmapped ranges Currently, tests can only request a new vaddr range by using vm_vaddr_alloc()/vm_vaddr_alloc_page()/vm_vaddr_alloc_pages() but these functions allocate and map physical pages too. Make it possible to request unmapped range too. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-36-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() tooVitaly Kuznetsov
Similar to vm_vaddr_alloc(), virt_map() needs to reflect the mapping in vm->vpages_mapped. While on it, remove unneeded code wrapping in vm_vaddr_alloc(). Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-35-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: selftests: Hyper-V PV IPI selftestVitaly Kuznetsov
Introduce a selftest for Hyper-V PV IPI hypercalls (HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx). The test creates one 'sender' vCPU and two 'receiver' vCPU and then issues various combinations of send IPI hypercalls in both 'normal' and 'fast' (with XMM input where necessary) mode. Later, the test checks whether IPIs were delivered to the expected destination vCPU[s]. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-34-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: selftests: Move the function doing Hyper-V hypercall to a common headerVitaly Kuznetsov
All Hyper-V specific tests issuing hypercalls need this. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-33-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: selftests: Move HYPERV_LINUX_OS_ID definition to a common headerVitaly Kuznetsov
HYPERV_LINUX_OS_ID needs to be written to HV_X64_MSR_GUEST_OS_ID by each Hyper-V specific selftest. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-32-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: selftests: Better XMM read/write helpersVitaly Kuznetsov
set_xmm()/get_xmm() helpers are fairly useless as they only read 64 bits from 128-bit registers. Moreover, these helpers are not used. Borrow _kvm_read_sse_reg()/_kvm_write_sse_reg() from KVM limiting them to XMM0-XMM8 for now. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-31-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: Expose Hyper-V L2 TLB flush featureVitaly Kuznetsov
With both nSVM and nVMX implementations in place, KVM can now expose Hyper-V L2 TLB flush feature to userspace. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-30-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: nSVM: hyper-v: Enable L2 TLB flushVitaly Kuznetsov
Implement Hyper-V L2 TLB flush for nSVM. The feature needs to be enabled both in extended 'nested controls' in VMCB and VP assist page. According to Hyper-V TLFS, synthetic vmexit to L1 is performed with - HV_SVM_EXITCODE_ENL exit_code. - HV_SVM_ENL_EXITCODE_TRAP_AFTER_FLUSH exit_info_1. Note: VP assist page is cached in 'struct kvm_vcpu_hv' so recalc_intercepts() doesn't need to read from guest's memory. KVM needs to update the case upon each VMRUN and after svm_set_nested_state (svm_get_nested_state_pages()) to handle the case when the guest got migrated while L2 was running. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-29-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: Make kvm_hv_get_assist_page() return 0/-errnoVitaly Kuznetsov
Convert kvm_hv_get_assist_page() to return 'int' and propagate possible errors from kvm_read_guest_cached(). Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-28-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: nVMX: hyper-v: Enable L2 TLB flushVitaly Kuznetsov
Enable L2 TLB flush feature on nVMX when: - Enlightened VMCS is in use. - The feature flag is enabled in eVMCS. - The feature flag is enabled in partition assist page. Perform synthetic vmexit to L1 after processing TLB flush call upon request (HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH). Note: nested_evmcs_l2_tlb_flush_enabled() uses cached VP assist page copy which gets updated from nested_vmx_handle_enlightened_vmptrld(). This is also guaranteed to happen post migration with eVMCS backed L2 running. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-27-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: nVMX: hyper-v: Cache VP assist page in 'struct kvm_vcpu_hv'Vitaly Kuznetsov
In preparation to enabling L2 TLB flush, cache VP assist page in 'struct kvm_vcpu_hv'. While on it, rename nested_enlightened_vmentry() to nested_get_evmptr() and make it return eVMCS GPA directly. No functional change intended. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-26-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Introduce fast guest_hv_cpuid_has_l2_tlb_flush() checkVitaly Kuznetsov
Introduce a helper to quickly check if KVM needs to handle VMCALL/VMMCALL from L2 in L0 to process L2 TLB flush requests. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-25-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: L2 TLB flushVitaly Kuznetsov
Handle L2 TLB flush requests by going through all vCPUs and checking whether there are vCPUs running the same VM_ID with a VP_ID specified in the requests. Perform synthetic exit to L2 upon finish. Note, while checking VM_ID/VP_ID of running vCPUs seem to be a bit racy, we count on the fact that KVM flushes the whole L2 VPID upon transition. Also, KVM_REQ_HV_TLB_FLUSH request needs to be done upon transition between L1 and L2 to make sure all pending requests are always processed. For the reference, Hyper-V TLFS refers to the feature as "Direct Virtual Flush". Note, nVMX/nSVM code does not handle VMCALL/VMMCALL from L2 yet. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-24-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall()Vitaly Kuznetsov
The newly introduced helper checks whether vCPU is performing a Hyper-V TLB flush hypercall. This is required to filter out L2 TLB flush hypercalls for processing. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-23-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush() nested hookVitaly Kuznetsov
Hyper-V supports injecting synthetic L2->L1 exit after performing L2 TLB flush operation but the procedure is vendor specific. Introduce .hv_inject_synthetic_vmexit_post_tlb_flush nested hook for it. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-22-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_idVitaly Kuznetsov
Similar to nSVM, KVM needs to know L2's VM_ID/VP_ID and Partition assist page address to handle L2 TLB flush requests. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-21-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in useVitaly Kuznetsov
To handle L2 TLB flush requests, KVM needs to keep track of L2's VM_ID/ VP_IDs which are set by L1 hypervisor. 'Partition assist page' address is also needed to handle post-flush exit to L1 upon request. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-20-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead ↵Vitaly Kuznetsov
of on-stack 'sparse_banks' To make kvm_hv_flush_tlb() ready to handle L2 TLB flush requests, KVM needs to allow for all 64 sparse vCPU banks regardless of KVM_MAX_VCPUs as L1 may use vCPU overcommit for L2. To avoid growing on-stack allocation, make 'sparse_banks' part of per-vCPU 'struct kvm_vcpu_hv' which is allocated dynamically. Note: sparse_set_to_vcpu_mask() can't currently be used to handle L2 requests as KVM does not keep L2 VM_ID -> L2 VCPU_ID -> L1 vCPU mappings, i.e. its vp_bitmap array is still bounded by the number of L1 vCPUs and so can remain an on-stack allocation. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-19-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Create a separate fifo for L2 TLB flushVitaly Kuznetsov
To handle L2 TLB flush requests, KVM needs to use a separate fifo from regular (L1) Hyper-V TLB flush requests: e.g. when a request to flush something in L2 is made, the target vCPU can transition from L2 to L1, receive a request to flush a GVA for L1 and then try to enter L2 back. The first request needs to be processed at this point. Similarly, requests to flush GVAs in L1 must wait until L2 exits to L1. No functional change as KVM doesn't handle L2 TLB flush requests from L2 yet. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-18-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi()Vitaly Kuznetsov
Get rid of on-stack allocation of vcpu_mask and optimize kvm_hv_send_ipi() for a smaller number of vCPUs in the request. When Hyper-V TLB flush is in use, HvSendSyntheticClusterIpi{,Ex} calls are not commonly used to send IPIs to a large number of vCPUs (and are rarely used in general). Introduce hv_is_vp_in_sparse_set() to directly check if the specified VP_ID is present in sparse vCPU set. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-17-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK ↵Vitaly Kuznetsov
instead of raw '64' It may not be clear from where the '64' limit for the maximum sparse bank number comes from, use HV_MAX_SPARSE_VCPU_BANKS define instead. Use HV_VCPUS_PER_SPARSE_BANK in KVM_HV_MAX_SPARSE_VCPU_SET_BITS's definition. Opportunistically adjust the comment around BUILD_BUG_ON(). No functional change. Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-16-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK ↵Vitaly Kuznetsov
constants It may not come clear from where the magical '64' value used in __cpumask_to_vpset() come from. Moreover, '64' means both the maximum sparse bank number as well as the number of vCPUs per bank. Add defines to make things clear. These defines are also going to be used by KVM. No functional change. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-15-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAsVitaly Kuznetsov
To handle L2 TLB flush requests, KVM needs to translate the specified L2 GPA to L1 GPA to read hypercall arguments from there. No functional change as KVM doesn't handle VMCALL/VMMCALL from L2 yet. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-14-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercallsVitaly Kuznetsov
Extended GVA ranges support bit seems to indicate whether lower 12 bits of GVA can be used to specify up to 4095 additional consequent GVAs to flush. This is somewhat described in TLFS. Previously, KVM was handling HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} requests by flushing the whole VPID so technically, extended GVA ranges were already supported. As such requests are handled more gently now, advertizing support for extended ranges starts making sense to reduce the size of TLB flush requests. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-13-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gentlyVitaly Kuznetsov
Currently, HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls are handled the exact same way as HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE{,EX}: by flushing the whole VPID and this is sub-optimal. Switch to handling these requests with 'flush_tlb_gva()' hooks instead. Use the newly introduced TLB flush fifo to queue the requests. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-12-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Add helper to read hypercall data for arraySean Christopherson
Move the guts of kvm_get_sparse_vp_set() to a helper so that the code for reading a guest-provided array can be reused in the future, e.g. for getting a list of virtual addresses whose TLB entries need to be flushed. Opportunisticaly swap the order of the data and XMM adjustment so that the XMM/gpa offsets are bundled together. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-11-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Introduce TLB flush fifoVitaly Kuznetsov
To allow flushing individual GVAs instead of always flushing the whole VPID a per-vCPU structure to pass the requests is needed. Use standard 'kfifo' to queue two types of entries: individual GVA (GFN + up to 4095 following GFNs in the lower 12 bits) and 'flush all'. The size of the fifo is arbitrarily set to '16'. Note, kvm_hv_flush_tlb() only queues 'flush all' entries for now and kvm_hv_vcpu_flush_tlb() doesn't actually read the fifo just resets the queue before returning -EOPNOTSUPP (which triggers full TLB flush) so the functional change is very small but the infrastructure is prepared to handle individual GVA flush requests. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-10-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flagVitaly Kuznetsov
In preparation to implementing fine-grained Hyper-V TLB flush and L2 TLB flush, resurrect dedicated KVM_REQ_HV_TLB_FLUSH request bit. As KVM_REQ_TLB_FLUSH_GUEST is a stronger operation, clear KVM_REQ_HV_TLB_FLUSH request in kvm_vcpu_flush_tlb_guest(). The flush itself is temporary handled by kvm_vcpu_flush_tlb_guest(). No functional change intended. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-9-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: Move clearing of TLB_FLUSH_CURRENT to kvm_vcpu_flush_tlb_all()Sean Christopherson
Clear KVM_REQ_TLB_FLUSH_CURRENT in kvm_vcpu_flush_tlb_all() instead of in its sole caller that processes KVM_REQ_TLB_FLUSH. Regardless of why/when kvm_vcpu_flush_tlb_all() is called, flushing "all" TLB entries also flushes "current" TLB entries. Ideally, there will never be another caller of kvm_vcpu_flush_tlb_all(), and moving the handling "requires" extra work to document the ordering requirement, but future Hyper-V paravirt TLB flushing support will add similar logic for flush "guest" (Hyper-V can flush a subset of "guest" entries). And in the Hyper-V case, KVM needs to do more than just clear the request, the queue of GPAs to flush also needs to purged, and doing all only in the request path is undesirable as kvm_vcpu_flush_tlb_guest() does have multiple callers (though it's unlikely KVM's paravirt TLB flush will coincide with Hyper-V's paravirt TLB flush). Move the logic even though it adds extra "work" so that KVM will be consistent with how flush requests are processed when the Hyper-V support lands. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-8-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: VMX: Rename "vmx/evmcs.{ch}" to "vmx/hyperv.{ch}"Vitaly Kuznetsov
To conform with SVM, rename VMX specific Hyper-V files from "evmcs.{ch}" to "hyperv.{ch}". While Enlightened VMCS is a lion's share of these files, some stuff (e.g. enlightened MSR bitmap, the upcoming Hyper-V L2 TLB flush, ...) goes beyond that. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-7-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush'Vitaly Kuznetsov
To make terminology between Hyper-V-on-KVM and KVM-on-Hyper-V consistent, rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush'. The change eliminates the use of confusing 'direct' and adds the missing underscore. No functional change. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-6-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18x86/hyperv: KVM: Rename "hv_enlightenments" to "hv_vmcb_enlightenments"Sean Christopherson
Now that KVM isn't littered with "struct hv_enlightenments" casts, rename the struct to "hv_vmcb_enlightenments" to highlight the fact that the struct is specifically for SVM's VMCB. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 11:43:56 +0000