summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-12Merge tag 'please-pull-pstore_mevent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull pstore fixes from Tony Luck: "Patch series to allow EFI variable backend to pstore to hold multiple records." * tag 'please-pull-pstore_mevent' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: efi_pstore: Add a format check for an existing variable name at erasing time efi_pstore: Add a format check for an existing variable name at reading time efi_pstore: Add a sequence counter to a variable name efi_pstore: Add ctime to argument of erase callback efi_pstore: Remove a logic erasing entries from a write callback to hold multiple logs efi_pstore: Add a logic erasing entries to an erase callback efi_pstore: Check remaining space with QueryVariableInfo() before writing data
2012-12-12Merge tag 'please-pull-misc-3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 fix from Tony Luck: "Miscellaneous ia64 fix for 3.8. Just need to avoid a pending namespace collision from other work being merged." * tag 'please-pull-misc-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Resolve name space collision for cache_show()
2012-12-12Revert "HID: sensors: add to special driver list"Alexander Holler
Those IDs aren't necessary anymore. This reverts commit c8147d9ea19bfe7d8e569351bc7239e118dd6997. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12HID: sensors: autodetect USB HID sensor hubsAlexander Holler
It should not be necessary to add IDs for HID sensor hubs to lists in hid-core.c and hid-sensor-hub.c. So instead of a whitelist, autodetect such USB HID sensor hubs, based on a collection of type physical inside a useage page of type sensor. If some sensor hubs stil must be usable as raw devices, a blacklist might be created. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12Merge tag 'arm64-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 updates from Catalin Marinas: - Generic execve, kernel_thread, fork/vfork/clone. - Preparatory patches for KVM support (initialising EL2 mode for later installing KVM support, hypervisor stub). - Signal handling corner case fix (alternative signal stack set up for a SEGV handler, which is raised in response to RLIMIT_STACK being reached). - Sub-nanosecond timer error fix. * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (30 commits) arm64: Update the MAINTAINERS entry arm64: compat for clock_adjtime(2) is miswired arm64: move FP-SIMD save/restore code to a macro arm64: hyp: initialize vttbr_el2 to zero arm64: add hypervisor stub arm64: record boot mode when entering the kernel arm64: move vector entry macro to assembler.h arm64: add AArch32 execution modes to ptrace.h arm64: expand register mapping between AArch32 and AArch64 arm64: generic timer: use virtual counter instead of physical at EL0 arm64: vdso: defer shifting of nanosecond component of timespec arm64: vdso: rework __do_get_tspec register allocation and return shift arm64: vdso: check sequence counter even for coarse realtime operations arm64: vdso: fix clocksource mask when extracting bottom 56 bits ARM64: Remove incorrect Kconfig symbol HAVE_SPARSE_IRQ Documentation: Fixes a word in Documentation/arm64/memory.txt arm64: Make !dirty ptes read-only arm64: Convert empty flush_cache_{mm,page} functions to static inline arm64: signal: let the compiler inline compat_get_sigframe arm64: signal: return struct rt_sigframe from get_sigframe ... Conflicts: arch/arm64/include/asm/unistd32.h
2012-12-12MIPS: Transparent Huge Pages supportRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-12MIPS: Cavium: Add EDAC support.Ralf Baechle
Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-12-12MIPS: Control huge tlb support via Kconfig symbol MIPS_HUGE_TLB_SUPPORTDavid Daney
We need Huge TLBs for HUGETLB_PAGE, or the soon to follow TRANSPARENT_HUGEPAGE. collect this information under a single Kconfig symbol. Signed-off-by: David Daney <david.daney@cavium.com>
2012-12-12MIPS: page.h: Provide more readable definition for PAGE_MASK.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-12MN10300: Use asm-generic/pci_iomap.hDavid Howells
The declarations from MN10300's pci_iomap() was removed by commit 34f1bdee1910f7efe3c32e1a891dba4fd21cb3b6 but asm-generic/pci_iomap.h wasn't then #included from asm/io.h. Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12MN10300: Get rid of unused variable from ASB2305 PCI codeDavid Howells
Get rid of an unused variable in pcibios_fixup_device_resources() which leads to the following warning: arch/mn10300/unit-asb2305/pci.c: In function 'pcibios_fixup_device_resources': arch/mn10300/unit-asb2305/pci.c:324:24: warning: unused variable 'region' [-Wunused-variable] Whilst we're at it, merge the two integer variable declarations into one line. Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12MN10300: ASB2305 PCI code needs linux/irq.hDavid Howells
ASB2305 PCI code needs to #include linux/irq.h for XIRQ1 so that it can set the CPU interrupt priority level on the PCI interrupt. Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12mn10300/mm/fault.c: Port OOM changes to do_page_faultKautuk Consul
Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to mn10300. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12MN10300: Handle cacheable PCI regions in pci_iomap()David Howells
Handle cacheable PCI regions in pci_iomap(). If IORESOURCE_CACHEABLE is set then we AND away the 0x20000000 "flag". Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12MN10300: fix debug polling in ttySM driverMark Salter
The debug polling interface for the SoC serial ports did not work in the case where the serial ports were not also used as a console. In that case, the uart driver startup function will not be called so tx and rx would not be enabled in the hardware control register. Also, vdma interrupts would not be enabled which the poll_get_char function relied on. This patch makes sure that the rx and tx enables are set as a consequence of the uart set_termios call which is the only initialization done for the debug polling interface. Also, the poll_get_char now handles the case where vdma interrupts are not enabled. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12MN10300: ttySM: clean up unnecessary castingMark Salter
The ttySM uart data register pointers are declared as void* pointers. Change them to u8* pointers so we don't need to use casts in the code. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12MN10300: fix SMP synchronization between txdma and serial driverMark Salter
The SoC serial port driver uses a high priority interrupt to handle tx of characters in the tx ring buffer. The driver needs to disable/enable this IRQ from outside of irq context. The original code to do this is not foolproof on SMP machines because the IRQ running on one core could still access the serial port for a short time after the driver running on another core disables the interrupt. This patch adds a flag to tell the IRQ handler that the driver wants to disable the interrupt. After seeing the flag, the IRQ handler will immediately disable the interrupt and exit. After setting the flag, the driver will wait for interrupt to be disabled by the IRQ handler. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12MN10300: fix serial port vdma irq setup for SMPMark Salter
The builtin SoC serial ports have no FIFOs and use a virtual DMA mechanism based on high priority IRQs to avoid overruns. These high priority interrupts are pinned to cpu#0 on SMP systems. This patch fixes a problem with SMP where the set_intr_level() interface is used to set the priority for these IRQs. The set_intr_level() function sets priority on the local cpu but on SMP systems, this code may be run on some other cpu than the one handling the interrupts. Instead of setting interrupt level explicitly, this patch uses a special irq_chip for these interrupts so that the mask/unmask methods can set the interrupt level implicitly. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12MN10300: cleanup IRQ affinity settingMark Salter
The irq_set_affinity handler for the mn10300 cpu pic had some hard-coded IRQs which were not to be migrated from one cpu to another. This patch cleans those up by using a combination of IRQF_NOBALANCING and specialized irq chips with no irq_set_affinity handler. This maintains the previous behavior by using generic IRQ interfaces rather than hard coding IRQ numbers in the default irq_set_affinity handler. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12MN10300: ttySM: Use memory barriers correctly in circular buffer logicDavid Howells
Use memory barriers correctly in the circular buffer logic used in the driver, as documented in Documentation/circular-buffers.txt. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Mark Salter <msalter@redhat.com>
2012-12-12Merge branch 'omap-serial' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM OMAP serial updates from Russell King: "This series is a major reworking of the OMAP serial driver code fixing various bugs in the hardware-assisted flow control, extending up into serial_core for a couple of issues. These fixes have been done as a set of progressive changes and transformations in the hope that no new bugs will be introduced by this series. The problems are many-fold, from the driver not being informed about updated settings, to the driver not knowing what the intentions of the upper layers are. The first four patches tackle the serial_core layer, allowing it to provide the necessary information to drivers, and the remaining patches allow the OMAP serial driver to take advantage of this. This brings hardware assisted RTS/CTS and XON/OFF flow control into a useful state. These patches have been in linux-next for most of the last cycle; indeed they predate the previous merge window. They've also been posted to the OMAP people." * 'omap-serial' of git://git.linaro.org/people/rmk/linux-arm: (21 commits) SERIAL: omap: fix hardware assisted flow control SERIAL: omap: simplify (2) SERIAL: omap: move xon/xoff setting earlier SERIAL: omap: always set TCR SERIAL: omap: simplify SERIAL: omap: don't read back LCR/MCR/EFR SERIAL: omap: serial_omap_configure_xonxoff() contents into set_termios SERIAL: omap: configure xon/xoff before setting modem control lines SERIAL: omap: remove OMAP_UART_SYSC_RESET and OMAP_UART_FIFO_CLR SERIAL: omap: move driver private definitions and structures to driver SERIAL: omap: remove 'irq_pending' bitfield SERIAL: omap: fix MCR TCRTLR bit handling SERIAL: omap: fix set_mctrl() breakage SERIAL: omap: no need to re-read EFR SERIAL: omap: remove setting of EFR SCD bit SERIAL: omap: allow hardware assisted IXANY mode to be disabled SERIAL: omap: allow hardware assisted rts/cts modes to be disabled SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control SERIAL: core: add hardware assisted h/w flow control support SERIAL: core: add hardware assisted s/w flow control support ... Conflicts: drivers/tty/serial/omap-serial.c
2012-12-12ALSA: hda - Move runtime PM check to runtime_idle callbackTakashi Iwai
The runtime_idle callback is the right place to check the suspend capability, but currently we do it wrongly in the runtime_suspend callback. This leads to a kernel error message like: pci_pm_runtime_suspend(): azx_runtime_suspend+0x0/0x50 [snd_hda_intel] returns -11 and the runtime PM core would even repeat the attempts. Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Cc: <stable@vger.kernel.org> [v3.7] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-12OMAPDSS: DISPC: remove dispc fck usesTomi Valkeinen
The previous patch changes dispc to get the dispc fck rate from dss core driver. This was the only use of the dispc fck in dispc, and thus we can now remove the clock handling. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-12OMAPDSS: DISPC: get dss clock rate from dss driverTomi Valkeinen
Dispc currently gets dispc's fck with clk_get() and uses clk_get_rate() to get the rate for scaling calculations. This causes a problem with common clock framework, as omapdss uses the dispc functions inside a spinlock, and common clock framework uses a mutex in clk_get_rate(). Looking at the DSS clock tree, the above use of the dispc fck is not quite correct. The DSS_FCLK from PRCM goes to DSS core block, which has a mux to select the clock for DISPC from various options, so the current use of dispc fck bypasses that. Fortunately we never change the dispc clock mux for now. To fix the issue with clk_get_rate(), this patch caches the dss clock rate in dss.c when it is set. Dispc will then ask for the clock rate from dss. While this is not very elegant, it does fix the issue, and it's not totally wrong when considering that the dispc fck actually comes via dss. In the future we should probably look into common clock framework and see if that could be used to represent the DSS clock tree properly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-12ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522Takashi Iwai
Acer Aspire One 522 has the infamous digital mic unit that needs the phase inversion fixup for stereo. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=715737 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-12ALSA: hda - Avoid doubly suspend after vga switcherooTakashi Iwai
The HD-audio driver artificially calls the suspend and the resume code path in the VGA switcheroo state changes. When a machine goes to suspend, it tries to suspend the device again, and it stalls at snd_power_wait(). This patch adds checks whether the devices were already in (forced) suspend in PM callbacks for avoiding the doubly suspend. Reported-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-12ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3Denis Washington
The only required change is to extend the existing Xonar U1 mixer quirks to the U3, which seems to be controlled the same way. Signed-off-by: Denis Washington <denisw@online.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-12ALSA: hda - Check validity of CORB/RIRB WP readsTakashi Iwai
When the HD-audio controller is disabled (e.g. via vga switcheroo) but the driver is still accessing it, it spews floods of "spurious response" kernel messages. It's because CORB/RIRB WP reads 0xff, and the driver tries to fill up until this number. This patch changes the CORB/RIRB WP reads to word instead of byte, and add the check of the read value. If it's 0xffff, the controller is supposed to be disabled, so the further action will be skipped. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-12ALSA: hda - use usleep_range in link reset and change timeout checkMengdong Lin
Reducing the time on HDA link reset can help to reduce the driver loading time. So we replace msleep with usleep_range to get more accurate time control and change the value to a smaller one. And a 100ms timeout is set for both entering and exiting the link reset. Signed-off-by: Xingchao Wang <xingchao.wang@intel.com> Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-12Thermal: Fix DEFAULT_THERMAL_GOVERNORZhang Rui
Fix DEFAULT_THERMAL_GOVERNOR to be consistant with the default governor selected in kernel config file. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-12-12Thermal: fix a NULL pointer dereference when generic thermal layer is built ↵Zhang Rui
as a module [ 12.761956] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 12.762016] IP: [<ffffffffa0005277>] handle_thermal_trip+0x47/0x130 [thermal_sys] [ 12.762060] PGD 1fec74067 PUD 1fee5b067 PMD 0 [ 12.762127] Oops: 0000 [#1] SMP [ 12.762177] Modules linked in: hid_generic crc32c_intel usbhid hid firewire_ohci(+) e1000e(+) firewire_core crc_itu_t xhci_hcd(+) thermal(+) fan thermal_sys hwmon [ 12.762423] CPU 1 [ 12.762443] Pid: 187, comm: modprobe Tainted: G A 3.7.0-thermal-module+ #25 /DH77DF [ 12.762496] RIP: 0010:[<ffffffffa0005277>] [<ffffffffa0005277>] handle_thermal_trip+0x47/0x130 [thermal_sys] [ 12.762682] RSP: 0018:ffff8801fe7ddc18 EFLAGS: 00010282 [ 12.762704] RAX: 0000000000000000 RBX: ffff8801ff3e9c00 RCX: ffff8801fdc39800 [ 12.762728] RDX: ffff8801fe7ddc24 RSI: 0000000000000001 RDI: ffff8801ff3e9c00 [ 12.762764] RBP: ffff8801fe7ddc48 R08: 0000000004000000 R09: ffffffffa001f568 [ 12.762797] R10: ffffffff81363083 R11: 0000000000000001 R12: 0000000000000001 [ 12.762832] R13: 0000000000000000 R14: 0000000000000001 R15: ffff8801fde73e68 [ 12.762866] FS: 00007f5548516700(0000) GS:ffff88021f240000(0000) knlGS:0000000000000000 [ 12.762912] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 12.762946] CR2: 0000000000000018 CR3: 00000001fefe2000 CR4: 00000000001407e0 [ 12.762979] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.763014] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 12.763048] Process modprobe (pid: 187, threadinfo ffff8801fe7dc000, task ffff8801fe5bdb40) [ 12.763095] Stack: [ 12.763122] 0000000000019640 00000000fdc39800 ffff8801fe7ddc48 ffff8801ff3e9c00 [ 12.763225] 0000000000000002 0000000000000000 ffff8801fe7ddc78 ffffffffa00053e7 [ 12.763338] ffff8801ff3e9c00 0000000000006c98 ffffffffa0007480 ffff8801ff3e9c00 [ 12.763440] Call Trace: [ 12.763470] [<ffffffffa00053e7>] thermal_zone_device_update+0x77/0xa0 [thermal_sys] [ 12.763515] [<ffffffffa0006d38>] thermal_zone_device_register+0x788/0xa88 [thermal_sys] [ 12.763562] [<ffffffffa001f394>] acpi_thermal_add+0x360/0x4c8 [thermal] [ 12.763598] [<ffffffff8133902a>] acpi_device_probe+0x50/0x190 [ 12.763632] [<ffffffff811bd793>] ? sysfs_create_link+0x13/0x20 [ 12.763666] [<ffffffff813cc41b>] driver_probe_device+0x7b/0x240 [ 12.763699] [<ffffffff813cc68b>] __driver_attach+0xab/0xb0 [ 12.763732] [<ffffffff813cc5e0>] ? driver_probe_device+0x240/0x240 [ 12.763766] [<ffffffff813ca836>] bus_for_each_dev+0x56/0x90 [ 12.763799] [<ffffffff813cbf4e>] driver_attach+0x1e/0x20 [ 12.763831] [<ffffffff813cbac0>] bus_add_driver+0x190/0x290 [ 12.763864] [<ffffffffa0022000>] ? 0xffffffffa0021fff [ 12.763896] [<ffffffff813ccbea>] driver_register+0x7a/0x160 [ 12.763928] [<ffffffffa0022000>] ? 0xffffffffa0021fff [ 12.763960] [<ffffffff813399fb>] acpi_bus_register_driver+0x43/0x45 [ 12.763995] [<ffffffffa002203a>] acpi_thermal_init+0x3a/0x42 [thermal] [ 12.764029] [<ffffffff8100207f>] do_one_initcall+0x3f/0x170 [ 12.764063] [<ffffffff810b1a5f>] sys_init_module+0x8f/0x200 [ 12.764097] [<ffffffff815ff259>] system_call_fastpath+0x16/0x1b [ 12.764129] Code: 48 8b 87 c8 02 00 00 41 89 f4 48 8d 55 dc ff 50 28 44 8b 6d dc 41 8d 45 fe 83 f8 01 76 5e 48 8b 83 d8 02 00 00 44 89 e6 48 89 df <ff> 50 18 4c 8d a3 10 03 00 00 4c 89 e7 e8 87 f1 5e e1 8b 83 bc [ 12.765164] RIP [<ffffffffa0005277>] handle_thermal_trip+0x47/0x130 [thermal_sys] [ 12.765223] RSP <ffff8801fe7ddc18> [ 12.765252] CR2: 0000000000000018 [ 12.765284] ---[ end trace 7723294cdfb00d2a ]--- This is because thermal_zone_device_update() is invoked before any thermal governors being registered. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxAnton Vorontsov
The merge is merely to fix conflicts before sending a pull request. Conflicts: drivers/power/ab8500_btemp.c drivers/power/ab8500_charger.c drivers/power/ab8500_fg.c drivers/power/abx500_chargalg.c drivers/power/max8925_power.c Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-12-12pkt_sched: avoid requeues if possibleEric Dumazet
With BQL being deployed, we can more likely have following behavior : We dequeue a packet from qdisc in dequeue_skb(), then we realize target tx queue is in XOFF state in sch_direct_xmit(), and we have to hold the skb into gso_skb for later. This shows in stats (tc -s qdisc dev eth0) as requeues. Problem of these requeues is that high priority packets can not be dequeued as long as this (possibly low prio and big TSO packet) is not removed from gso_skb. At 1Gbps speed, a full size TSO packet is 500 us of extra latency. In some cases, we know that all packets dequeued from a qdisc are for a particular and known txq : - If device is non multi queue - For all MQ/MQPRIO slave qdiscs This patch introduces a new qdisc flag, TCQ_F_ONETXQUEUE to mark this capability, so that dequeue_skb() is allowed to dequeue a packet only if the associated txq is not stopped. This indeed reduce latencies for high prio packets (or improve fairness with sfq/fq_codel), and almost remove qdisc 'requeues'. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-12solos-pci: fix double-free of TX skb in DMA modeDavid Woodhouse
We weren't clearing card->tx_skb[port] when processing the TX done interrupt. If there wasn't another skb ready to transmit immediately, this led to a double-free because we'd free it *again* next time we did have a packet to send. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timer update from Ingo Molnar: "This tree includes HPET fixes and also implements a calibration-free, TSC match driven APIC timer interrupt mode: 'TSC deadline mode' supported in SandyBridge and later CPUs." * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: hpet: Fix inverted return value check in arch_setup_hpet_msi() x86: hpet: Fix masking of MSI interrupts x86: apic: Use tsc deadline for oneshot when available
2012-12-11Merge branch 'x86-nuke386-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull "Nuke 386-DX/SX support" from Ingo Molnar: "This tree removes ancient-386-CPUs support and thus zaps quite a bit of complexity: 24 files changed, 56 insertions(+), 425 deletions(-) ... which complexity has plagued us with extra work whenever we wanted to change SMP primitives, for years. Unfortunately there's a nostalgic cost: your old original 386 DX33 system from early 1991 won't be able to boot modern Linux kernels anymore. Sniff." I'm not sentimental. Good riddance. * 'x86-nuke386-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, 386 removal: Document Nx586 as a 386 and thus unsupported x86, cleanups: Simplify sync_core() in the case of no CPUID x86, 386 removal: Remove CONFIG_X86_POPAD_OK x86, 386 removal: Remove CONFIG_X86_WP_WORKS_OK x86, 386 removal: Remove CONFIG_INVLPG x86, 386 removal: Remove CONFIG_BSWAP x86, 386 removal: Remove CONFIG_XADD x86, 386 removal: Remove CONFIG_CMPXCHG x86, 386 removal: Remove CONFIG_M386 from Kconfig
2012-12-11Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 topology discovery improvements from Ingo Molnar: "These changes improve topology discovery on AMD CPUs. Right now this feeds information displayed in /sys/devices/system/cpu/cpuX/cache/indexY/* - but in the future we could use this to set up a better scheduling topology." * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cacheinfo: Base cache sharing info on CPUID 0x8000001d on AMD x86, cacheinfo: Make use of CPUID 0x8000001d for cache information on AMD x86, cacheinfo: Determine number of cache leafs using CPUID 0x8000001d on AMD x86: Add cpu_has_topoext
2012-12-11Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Small cleanups." * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix the error of using "const" in gen-insn-attr-x86.awk x86, apic: Cleanup cfg->domain setup for legacy interrupts x86: Remove dead hlt_use_halt code
2012-12-11Merge branch 'x86-bsp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 BSP hotplug changes from Ingo Molnar: "This tree enables CPU#0 (the boot processor) to be onlined/offlined on x86, just like any other CPU. Enabled on Intel CPUs for now. Allowing this required the identification and fixing of latent CPU#0 assumptions (such as CPU#0 initializations, etc.) in the x86 architecture code, plus the identification of barriers to BSP-offlining, such as active PIC interrupts which can only be serviced on the BSP. It's behind a default-off option, and there's a debug option that allows the automatic testing of this feature. The motivation of this feature is to allow and prepare for true CPU-hotplug hardware support: recent changes to MCE support enable us to detect a deteriorating but not yet hard-failing L1/L2 cache on a CPU that could be soft-unplugged - or a failing L3 cache on a multi-socket system. Note that true hardware hot-plug is not yet fully enabled by this, because that requires a special platform wakeup sequence to be sent to the freshly powered up CPU#0. Future patches for this are planned, once such a platform exists. Chicken and egg" * 'x86-bsp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, topology: Debug CPU0 hotplug x86/i387.c: Initialize thread xstate only on CPU0 only once x86, hotplug: Handle retrigger irq by the first available CPU x86, hotplug: The first online processor saves the MTRR state x86, hotplug: During CPU0 online, enable x2apic, set_numa_node. x86, hotplug: Wake up CPU0 via NMI instead of INIT, SIPI, SIPI x86-32, hotplug: Add start_cpu0() entry point to head_32.S x86-64, hotplug: Add start_cpu0() entry point to head_64.S kernel/cpu.c: Add comment for priority in cpu_hotplug_pm_callback x86, hotplug, suspend: Online CPU0 for suspend or hibernate x86, hotplug: Support functions for CPU0 online/offline x86, topology: Don't offline CPU0 if any PIC irq can not be migrated out of it x86, Kconfig: Add config switch for CPU0 hotplug doc: Add x86 CPU0 online/offline feature
2012-12-11Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot changes from Ingo Molnar: "Two small changes: a cleanup and allow CONFIG_X86_MPPARSE to be turned off on SFI as well." * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arch/x86/Kconfig: Allow turning off CONFIG_X86_MPPARSE when either ACPI or SFI is present x86/boot/doc: Fix grammar and typo in boot.txt
2012-12-11Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm changes from Ingo Molnar: "Two fixlets and a cleanup." * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_32: Return actual stack when requesting sp from regs x86: Don't clobber top of pt_regs in nested NMI x86/asm: Clean up copy_page_*() comments and code
2012-12-11bnx2: Fix accidental reversions.Michael Chan
Commit 4ce45e02469c382699f4c5f6df727aea9dd2e1ca "bnx2: Add BNX2 prefix to CHIP ID and name macros" accidentally reverted 2 commits to use pci_ioumap() and to make pci_error_handlers const. This fixes those mistakes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core timer changes from Ingo Molnar: "It contains continued generic-NOHZ work by Frederic and smaller cleanups." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Kill xtime_lock, replacing it with jiffies_lock clocksource: arm_generic: use this_cpu_ptr per-cpu helper clocksource: arm_generic: use integer math helpers time/jiffies: Make clocksource_jiffies static clocksource: clean up parse_pmtmr() tick: Correct the comments for tick_sched_timer() tick: Conditionally build nohz specific code in tick handler tick: Consolidate tick handling for high and low res handlers tick: Consolidate timekeeping handling code
2012-12-11Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The biggest change affects group scheduling: we now track the runnable average on a per-task entity basis, allowing a smoother, exponential decay average based load/weight estimation instead of the previous binary on-the-runqueue/off-the-runqueue load weight method. This will inevitably disturb workloads that were in some sort of borderline balancing state or unstable equilibrium, so an eye has to be kept on regressions. For that reason the new load average is only limited to group scheduling (shares distribution) at the moment (which was also hurting the most from the prior, crude weight calculation and whose scheduling quality wins most from this change) - but we plan to extend this to regular SMP balancing as well in the future, which will simplify and speed up things a bit. Other changes involve ongoing preparatory work to extend NOHZ to the scheduler as well, eventually allowing completely irq-free user-space execution." * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) Revert "sched/autogroup: Fix crash on reboot when autogroup is disabled" cputime: Comment cputime's adjusting code cputime: Consolidate cputime adjustment code cputime: Rename thread_group_times to thread_group_cputime_adjusted cputime: Move thread_group_cputime() to sched code vtime: Warn if irqs aren't disabled on system time accounting APIs vtime: No need to disable irqs on vtime_account() vtime: Consolidate a bit the ctx switch code vtime: Explicitly account pending user time on process tick vtime: Remove the underscore prefix invasion sched/autogroup: Fix crash on reboot when autogroup is disabled cputime: Separate irqtime accounting from generic vtime cputime: Specialize irq vtime hooks kvm: Directly account vtime to system on guest switch vtime: Make vtime_account_system() irqsafe vtime: Gather vtime declarations to their own header file sched: Describe CFS load-balancer sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking sched: Make __update_entity_runnable_avg() fast sched: Update_cfs_shares at period edge ...
2012-12-11ktest: Test if target machine is up before installSteven Rostedt
Sometimes a test kernel will crash or hang on reboot (this is even more apparent when testing a config without CGROUPS on a box running systemd). When this happens, on the next iteration of installing a kernel, ktest will fail when it tries to install. Have ktest do a check to see if the target can be connected to via ssh before it tries to install. If it can't connect, then reboot again. This time the reboot will fail because it can't connect and will force a power cycle. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "These are late-v3.7 pending fixes for tracing." Fix up trivial conflict in kernel/trace/ring_buffer.c: the NULL pointer fix clashed with the change of type of the 'ret' variable. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ring-buffer: Fix race between integrity check and readers ring-buffer: Fix NULL pointer if rb_set_head_page() fails ftrace: Clear bits properly in reset_iter_read()
2012-12-11Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Lots of activity: 211 files changed, 8328 insertions(+), 4116 deletions(-) most of it on the tooling side. Main changes: * ftrace enhancements and fixes from Steve Rostedt. * uprobes fixes, cleanups and preparation for the ARM port from Oleg Nesterov. * UAPI fixes, from David Howels - prepares the arch/x86 UAPI transition * Separate perf tests into multiple objects, one per test, from Jiri Olsa. * Make hardware event translations available in sysfs, from Jiri Olsa. * Fixes to /proc/pid/maps parsing, preparatory to supporting data maps, from Namhyung Kim * Implement ui_progress for GTK, from Namhyung Kim * Add framework for automated perf_event_attr tests, where tools with different command line options will be run from a 'perf test', via python glue, and the perf syscall will be intercepted to verify that the perf_event_attr fields set by the tool are those expected, from Jiri Olsa * Add a 'link' method for hists, so that we can have the leader with buckets for all the entries in all the hists. This new method is now used in the default 'diff' output, making the sum of the 'baseline' column be 100%, eliminating blind spots. * libtraceevent fixes for compiler warnings trying to make perf it build on some distros, like fedora 14, 32-bit, some of the warnings really pointed to real bugs. * Add a browser for 'perf script' and make it available from the report and annotate browsers. It does filtering to find the scripts that handle events found in the perf.data file used. From Feng Tang * perf inject changes to allow showing where a task sleeps, from Andrew Vagin. * Makefile improvements from Namhyung Kim. * Add --pre and --post command hooks in 'stat', from Peter Zijlstra. * Don't stop synthesizing threads when one vanishes, this is for the existing threads when we start a tool like trace. * Use sched:sched_stat_runtime to provide a thread summary, this produces the same output as the 'trace summary' subcommand of tglx's original "trace" tool. * Support interrupted syscalls in 'trace' * Add an event duration column and filter in 'trace'. * There are references to the man pages in some tools, so try to build Documentation when installing, warning the user if that is not possible, from Borislav Petkov. * Give user better message if precise is not supported, from David Ahern. * Try to find cross-built objdump path by using the session environment information in the perf.data file header, from Irina Tirdea, original patch and idea by Namhyung Kim. * Diplays more output on features check for make V=1, so that one can figure out what is happening by looking at gcc output, etc. From Jiri Olsa. * Add on_exit implementation for systems without one, e.g. Android, from Bernhard Rosenkraenzer. * Only process events for vcpus of interest, helps handling large number of events, from David Ahern. * Cross compilation fixes for Android, from Irina Tirdea. * Add documentation on compiling for Android, from Irina Tirdea. * perf diff improvements from Jiri Olsa. * Target (task/user/cpu/syswide) handling improvements, from Namhyung Kim. * Add support in 'trace' for tracing workload given by command line, from Namhyung Kim. * ... and much more." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (194 commits) uprobes: Use percpu_rw_semaphore to fix register/unregister vs dup_mmap() race perf evsel: Introduce is_group_member method perf powerpc: Use uapi/unistd.h to fix build error tools: Pass the target in descend tools: Honour the O= flag when tool build called from a higher Makefile tools: Define a Makefile function to do subdir processing perf ui: Always compile browser setup code perf ui: Add ui_progress__finish() perf ui gtk: Implement ui_progress functions perf ui: Introduce generic ui_progress helper perf ui tui: Move progress.c under ui/tui directory perf tools: Add basic event modifier sanity check perf tools: Omit group members from perf_evlist__disable/enable perf tools: Ensure single disable call per event in record comand perf tools: Fix 'disabled' attribute config for record command perf tools: Fix attributes for '{}' defined event groups perf tools: Use sscanf for parsing /proc/pid/maps perf tools: Add gtk.<command> config option for launching GTK browser perf tools: Fix compile error on NO_NEWT=1 build perf hists: Initialize all of he->stat with zeroes ...
2012-12-11Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Affinity fixes and a nested threaded IRQ handling fix." * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Always force thread affinity irq: Set CPU affinity right on thread creation genirq: Provide means to retrigger parent
2012-12-11Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU update from Ingo Molnar: "The major features of this tree are: 1. A first version of no-callbacks CPUs. This version prohibits offlining CPU 0, but only when enabled via CONFIG_RCU_NOCB_CPU=y. Relaxing this constraint is in progress, but not yet ready for prime time. These commits were posted to LKML at https://lkml.org/lkml/2012/10/30/724. 2. Changes to SRCU that allows statically initialized srcu_struct structures. These commits were posted to LKML at https://lkml.org/lkml/2012/10/30/296. 3. Restructuring of RCU's debugfs output. These commits were posted to LKML at https://lkml.org/lkml/2012/10/30/341. 4. Additional CPU-hotplug/RCU improvements, posted to LKML at https://lkml.org/lkml/2012/10/30/327. Note that the commit eliminating __stop_machine() was judged to be too-high of risk, so is deferred to 3.9. 5. Changes to RCU's idle interface, most notably a new module parameter that redirects normal grace-period operations to their expedited equivalents. These were posted to LKML at https://lkml.org/lkml/2012/10/30/739. 6. Additional diagnostics for RCU's CPU stall warning facility, posted to LKML at https://lkml.org/lkml/2012/10/30/315. The most notable change reduces the default RCU CPU stall-warning time from 60 seconds to 21 seconds, so that it once again happens sooner than the softlockup timeout. 7. Documentation updates, which were posted to LKML at https://lkml.org/lkml/2012/10/30/280. A couple of late-breaking changes were posted at https://lkml.org/lkml/2012/11/16/634 and https://lkml.org/lkml/2012/11/16/547. 8. Miscellaneous fixes, which were posted to LKML at https://lkml.org/lkml/2012/10/30/309. 9. Finally, a fix for an lockdep-RCU splat was posted to LKML at https://lkml.org/lkml/2012/11/7/486." * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) context_tracking: New context tracking susbsystem sched: Mark RCU reader in sched_show_task() rcu: Separate accounting of callbacks from callback-free CPUs rcu: Add callback-free CPUs rcu: Add documentation for the new rcuexp debugfs trace file rcu: Update documentation for TREE_RCU debugfs tracing rcu: Reduce default RCU CPU stall warning timeout rcu: Fix TINY_RCU rcu_is_cpu_rrupt_from_idle check rcu: Clarify memory-ordering properties of grace-period primitives rcu: Add new rcutorture module parameters to start/end test messages rcu: Remove list_for_each_continue_rcu() rcu: Fix batch-limit size problem rcu: Add tracing for synchronize_sched_expedited() rcu: Remove old debugfs interfaces and also RCU flavor name rcu: split 'rcuhier' to each flavor rcu: split 'rcugp' to each flavor rcu: split 'rcuboost' to each flavor rcu: split 'rcubarrier' to each flavor rcu: Fix tracing formatting rcu: Remove the interface "rcudata.csv" ...
2012-12-11Merge branches 'core-locking-for-linus' and 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull trivial fix branches from Ingo Molnar. Cleanup in __get_key_name, and a timer comment fixlet. * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Use KSYM_NAME_LEN'ed buffer for __get_key_name() * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers, sched: Correct the comments for tick_sched_timer()
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:22:19 +0000