| Age | Commit message (Collapse) | Author |
|---|
|
Now that we have no platforms passing platform data to the arm_pmu code,
we can get rid of the platdata and associated hooks, paving the way for
rework of our IRQ handling.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The ux500 PMU IRQ bouncer is getting in the way of some fundametnal
changes to the ARM PMU driver, and it's the only special case that
exists today. Let's remove it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The plane buffer address/stride/height was incorrectly updated in the
plane_atomic_update operation instead of the vsync irq.
This patch delays this operation in the vsync irq along with the
other plane delayed setup.
This issue was masked using legacy framebuffer and X11 modesetting, but
is clearly visible using gbm rendering when buffer is submitted late after
vblank, like using software decoding and OpenGL rendering in Kodi.
With this patch, tearing and other artifacts disappears completely.
Cc: Michal Lazo <michal.lazo@gmail.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1518689976-23292-1-git-send-email-narmstrong@baylibre.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First round of IIO fixes for the 4.16 cycle.
One nasty very old crash around polling for buffers that aren't there
- though that can only cause effects on drivers that support events
but not buffers.
* buffer / kfifo handling in the core.
- Check there is a buffer and return 0 from poll directly if there
isn't. Poll doesn't make sense in this circumstances, but best to close
the hole.
* ad5933
- Change the marked buffer mode to a software buffer as the meaning of
the hardware buffer label has long since changed and this uses a front
end software buffer anyway.
* ad7192
- Fix the fact the external clock frequency was only set when using the
internal clock which was less than helpful.
* adis_lib
- Initialize the trigger before requesting the interrupt. Some newer
parts can power up with interrupt generation enabled so ordering now
matters.
* aspeed-adc
- Fix an errror handling path as labels and general ordering were wrong.
* srf08
- Fix a link error due to undefined devm_iio_triggered_buffer_setup.
* stm32-adc
- Fix error handling unwind squence in stm32h7_adc_enable.
|
|
During eviction, the driver may free more than one hole in the drm_mm
due to the side-effects in evicting the scanned nodes. However,
drm_mm_scan_color_evict() expects that the scan result is the first
available hole (in the mru freed hole_stack list):
kernel BUG at drivers/gpu/drm/drm_mm.c:844!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei
CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1
Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008
RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0
RSP: 0018:ffff880057a573f8 EFLAGS: 00010287
RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000
RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10
RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000
R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82
R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608
FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0
Call Trace:
? drm_mm_scan_remove_block+0x330/0x330
? drm_mm_scan_remove_block+0x151/0x330
i915_gem_evict_something+0x711/0xbd0 [i915]
? igt_evict_contexts+0x50/0x50 [i915]
? nop_clear_range+0x10/0x10 [i915]
? igt_evict_something+0x90/0x90 [i915]
? i915_gem_gtt_reserve+0x1a1/0x320 [i915]
i915_gem_gtt_insert+0x237/0x400 [i915]
__i915_vma_do_pin+0xc25/0x1a20 [i915]
eb_lookup_vmas+0x1c63/0x3790 [i915]
? i915_gem_check_execbuffer+0x250/0x250 [i915]
? trace_hardirqs_on_caller+0x33f/0x590
? _raw_spin_unlock_irqrestore+0x39/0x60
? __pm_runtime_resume+0x7d/0xf0
i915_gem_do_execbuffer+0x86a/0x2ff0 [i915]
? __kmalloc+0x132/0x340
? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915]
? drm_ioctl_kernel+0x12e/0x1c0
? drm_ioctl+0x662/0x980
? eb_relocate_slow+0xa90/0xa90 [i915]
? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915]
? __might_fault+0xea/0x1a0
i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915]
? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915]
? lock_acquire+0x3c0/0x3c0
? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915]
drm_ioctl_kernel+0x12e/0x1c0
drm_ioctl+0x662/0x980
? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915]
? drm_getstats+0x20/0x20
? debug_check_no_obj_freed+0x2a6/0x8c0
do_vfs_ioctl+0x170/0xe70
? ioctl_preallocate+0x170/0x170
? task_work_run+0xbe/0x160
? lock_acquire+0x3c0/0x3c0
? trace_hardirqs_on_caller+0x33f/0x590
? _raw_spin_unlock_irq+0x2f/0x50
SyS_ioctl+0x36/0x70
? do_vfs_ioctl+0xe70/0xe70
do_syscall_64+0x18c/0x5d0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x7f2ddf13b587
RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587
RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003
RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120
R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469
R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7
Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89
RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8
We can trivially relax this assumption by searching the hole_stack for
the scan result and warn instead if the driver called us without any
result.
Fixes: 3fa489dabea9 ("drm: Apply tight eviction scanning to color_adjust")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219113543.8010-1-chris@chris-wilson.co.uk
|
|
Add cannon point device ids for 4th (itouch) device.
Cc: <stable@vger.kernel.org> 4.14+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add CNP LP and CNP H device ids for cannon lake
and coffee lake platforms.
Cc: <stable@vger.kernel.org> 4.14+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus
Chanwoo writes:
Update extcon for v4.16-rc3
This patch fixes issue of X-power extcon-axp288 and Intel extcon-int3496 driver.
- For extcon-int3496 driver,
Process id-pin first so that we start with the right status in order to fix
a race where the initial work might still be running while other drivers
were already calling extcon_get_state().
- For extcon-axp288 driver,
Revert the patch[1] which were applied to v4.16-rc1 because there are better
ways with usb-role-switch and constify the axp288_pwr_up_down_info array.
[1] 60ed99961469a3 ("extcon: axp288: Redo charger type detection a couple of seconds after probe()")
|
|
Bit field [2:0] of HDMI_I2S_PIN_SEL_1 corresponds to SDATA_0,
not SDATA_2. This patch removes redefinition of HDMI_I2S_SEL_DATA2
constant and adds missing HDMI_I2S_SEL_DATA0.
The value of bit field selecting SDATA_1 (pin_sel_3) is also changed,
so it is 3 as suggested in the Exynos TRMs.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Since its inclusion in 2012 via commit bea8a429d91a ("drm/exynos: add rotator ipp driver")
this header is not used by any source files and is empty.
Lets just remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
two functions
Omit an extra message for a memory allocation failure in these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Due to a typo, the mask was destroyed by a comparison instead of a bit
shift.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The exynos DRM driver uses real-time 'struct timeval' values
for exporting its timestamps to user space. This has multiple
problems:
1. signed seconds overflow in y2038
2. the 'struct timeval' definition is deprecated in the kernel
3. time may jump or go backwards after a 'settimeofday()' syscall
4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they
can't be compared
5. exporting microseconds requires a division by 1000, which may
be slow on some architectures.
The code existed in two places before, but the IPP portion was
removed in 8ded59413ccc ("drm/exynos: ipp: Remove Exynos DRM
IPP subsystem"), so we no longer need to worry about it.
Ideally timestamps should just use 64-bit nanoseconds instead, but
of course we can't change that now. Instead, this tries to address
the first four points above by using monotonic 'timespec' values.
According to Tobias Jakobi, user space doesn't care about the
timestamp at the moment, so we can change the format. Even if
there is something looking at them, it will work just fine with
monotonic times as long as the application only looks at the
relative values between two events.
Link: https://patchwork.kernel.org/patch/10038593/
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
|
|
Pull networking fixes from David Miller:
1) Prevent index integer overflow in ptr_ring, from Jason Wang.
2) Program mvpp2 multicast filter properly, from Mikulas Patocka.
3) The bridge brport attribute file is write only and doesn't have a
->show() method, don't blindly invoke it. From Xin Long.
4) Inverted mask used in genphy_setup_forced(), from Ingo van Lil.
5) Fix multiple definition issue with if_ether.h UAPI header, from
Hauke Mehrtens.
6) Fix GFP_KERNEL usage in atomic in RDS protocol code, from Sowmini
Varadhan.
7) Revert XDP redirect support from thunderx driver, it is not
implemented properly. From Jesper Dangaard Brouer.
8) Fix missing RTNL protection across some tipc operations, from Ying
Xue.
9) Return the correct IV bytes in the TLS getsockopt code, from Boris
Pismenny.
10) Take tclassid into consideration properly when doing FIB rule
matching. From Stefano Brivio.
11) cxgb4 device needs more PCI VPD quirks, from Casey Leedom.
12) TUN driver doesn't align frags properly, and we can end up doing
unaligned atomics on misaligned metadata. From Eric Dumazet.
13) Fix various crashes found using DEBUG_PREEMPT in rmnet driver, from
Subash Abhinov Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
tg3: APE heartbeat changes
mlxsw: spectrum_router: Do not unconditionally clear route offload indication
net: qualcomm: rmnet: Fix possible null dereference in command processing
net: qualcomm: rmnet: Fix warning seen with 64 bit stats
net: qualcomm: rmnet: Fix crash on real dev unregistration
sctp: remove the left unnecessary check for chunk in sctp_renege_events
rxrpc: Work around usercopy check
tun: fix tun_napi_alloc_frags() frag allocator
udplite: fix partial checksum initialization
skbuff: Fix comment mis-spelling.
dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
PCI/cxgb4: Extend T3 PCI quirk to T4+ devices
cxgb4: fix trailing zero in CIM LA dump
cxgb4: free up resources of pf 0-3
fib_semantics: Don't match route with mismatching tclassid
NFC: llcp: Limit size of SDP URI
tls: getsockopt return record sequence number
tls: reset the crypto info if copy_from_user fails
tls: retrun the correct IV in getsockopt
docs: segmentation-offloads.txt: add SCTP info
...
|
|
syzbot reported a scheduling while atomic issue at netns
destruction time:
BUG: sleeping function called from invalid context at net/core/sock.c:2769
in_atomic(): 1, irqs_disabled(): 0, pid: 85, name: kworker/u4:3
5 locks held by kworker/u4:3/85:
#0: ((wq_completion)"%s""netns"){+.+.}, at: [<00000000c9792deb>]
process_one_work+0xaaf/0x1af0 kernel/workqueue.c:2084
#1: (net_cleanup_work){+.+.}, at: [<00000000adc12e2a>]
process_one_work+0xb01/0x1af0 kernel/workqueue.c:2088
#2: (net_sem){++++}, at: [<000000009ccb5669>] cleanup_net+0x23f/0xd20
net/core/net_namespace.c:494
#3: (net_mutex){+.+.}, at: [<00000000a92767d9>] cleanup_net+0xa7d/0xd20
net/core/net_namespace.c:496
#4: (&(&srv->idr_lock)->rlock){+...}, at: [<000000001343e568>]
spin_lock_bh include/linux/spinlock.h:315 [inline]
#4: (&(&srv->idr_lock)->rlock){+...}, at: [<000000001343e568>]
tipc_topsrv_stop+0x231/0x610 net/tipc/topsrv.c:685
CPU: 0 PID: 85 Comm: kworker/u4:3 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
___might_sleep+0x2b2/0x470 kernel/sched/core.c:6128
__might_sleep+0x95/0x190 kernel/sched/core.c:6081
lock_sock_nested+0x37/0x110 net/core/sock.c:2769
lock_sock include/net/sock.h:1463 [inline]
tipc_release+0x103/0xff0 net/tipc/socket.c:572
sock_release+0x8d/0x1e0 net/socket.c:594
tipc_topsrv_stop+0x3c0/0x610 net/tipc/topsrv.c:696
tipc_exit_net+0x15/0x40 net/tipc/core.c:96
ops_exit_list.isra.6+0xae/0x150 net/core/net_namespace.c:148
cleanup_net+0x6ba/0xd20 net/core/net_namespace.c:529
process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113
worker_thread+0x223/0x1990 kernel/workqueue.c:2247
kthread+0x33c/0x400 kernel/kthread.c:238
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429
This is caused by tipc_topsrv_stop() releasing the listener socket
with the idr lock held. This changeset addresses the issue moving
the release operation outside such lock.
Reported-and-tested-by: syzbot+749d9d87c294c00ca856@syzkaller.appspotmail.com
Fixes: 0ef897be12b8 ("tipc: separate topology server listener socket from subcsriber sockets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: ///jon
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit cc1ea9ffadf7 ("tipc: eliminate struct tipc_subscriber") we
re-introduced an old bug on the error path in the function
tipc_topsrv_kern_subscr(). We now re-introduce the correction too.
Reported-by: syzbot+f62e0f2a0ef578703946@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Richard has been inactive on the linux-leds list for a long time.
After email discussion we agreed on removing him from
the LED maintainers, which will better reflect the actual status.
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
Kirill Tkhai says:
====================
Converting pernet_operations (part #2)
This patchset continues to review and to convert pernet_operations
to async. There are mostly ipv6, also some regular used netfilter
pernet_operations are involved. One more converted is cfg80211_pernet_ops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations register and unregister
net::ipv4.iptable_filter table. Since there are
no packets in-flight at the time of exit method
is working, iptables rules should not be touched.
Also, pernet_operations should not send ipv4
packets each other. So, it's safe to mark them
async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip_tables_net_ops and udplite6_net_ops create and destroy /proc entries.
xt_net_ops does nothing.
So, we are able to mark them async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Exit methods calls inet_frags_exit_net() with global ip6_frags
as argument. So, after we make the pernet_operations async,
a pair of exit methods may be called to iterate this hash table.
Since there is inet_frag_worker(), which already may work
in parallel with inet_frags_exit_net(), and it can make the same
cleanup, that inet_frags_exit_net() does, it's safe. So we may
mark these pernet_operations as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations register and unregister tables
and lists for packets forwarding. All of the entities
are per-net. Init methods makes simple initializations,
and since net is not visible for foreigners at the time
it is working, it can't race with anything. Exit method
is executed when there are only local devices, and there
mustn't be packets in-flight. Also, it looks like no one
pernet_operations want to send ipv6 packets to foreign
net. The same reasons are for ipv6_addr_label_ops and
ip6_segments_ops. So, we are able to mark all them as
async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations create sysctl tables and
initialize net::xfrm.xfrm6_dst_ops used for routing.
It doesn't look like another pernet_operations send
ipv6 packets to foreign net namespaces, so it should
be safe to mark the pernet_operations as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations create and destroy /proc entries.
ip6_fl_purge() makes almost the same actions as timer
ip6_fl_gc_timer does, and as it can be executed in parallel
with ip6_fl_purge(), two parallel ip6_fl_purge() may be
executed. So, we can mark it async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations only register and unregister /proc
entries, so it's possible to mark them async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations create and destroy sysctl tables.
They are not touched by another net pernet_operations.
So, it's possible to execute them in parallel with others.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations create and destroy net::ipv6.tcp_sk
socket, which is used in tcp_v6_send_response() only. It looks
like foreign pernet_operations don't want to set ipv6 connection
inside destroyed net, so this socket may be created in destroyed
in parallel with anything else. inet_twsk_purge() is also safe
for that, as described in patch for tcp_sk_ops. So, it's possible
to mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations register and unregister
net::ipv6.fib6_rules_ops, which are used for
routing. It looks like there are no pernet_operations,
which send ipv6 packages to another net, so we
are able to mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net->ipv6.peers is dereferenced in three places via inet_getpeer_v6(),
and it's used to handle skb. All the users of inet_getpeer_v6() do not
look like be able to be called from foreign net pernet_operations, so
we may mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
and ip6_route_net_late_ops
These pernet_operations create and destroy /proc entries
and safely may be converted and safely may be mark as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations create and destroy net::ipv6.icmp_sk
socket, used to send ICMP or error reply.
Nobody can dereference the socket to handle a packet before
net is initialized, as there is no routing; nobody can do
that in parallel with exit, as all of devices are moved
to init_net or destroyed and there are no packets it-flight.
So, it's possible to mark these pernet_operations as async.
The same for ndisc_net_ops and for igmp6_net_ops. The last
one also creates and destroys /proc entries.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These pernet_operations create and destroy /proc entries,
populate and depopulate net::rules_ops and multiroute table.
All the structures are pernet, and they are not touched
by foreign net pernet_operations. So, it's possible to mark
them async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch finishes converting pernet_operations
registered in net/wireless directory.
These pernet_operations have only exit method,
which moves devices to init_net. This action
is not pernet_operations-specific, and function
cfg80211_switch_netns() may be called all time
during the system life. All necessary protection
against concurrent cfg80211_pernet_exit() is made
by rtnl_lock(). So, cfg80211_pernet_ops is able
to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
init method initializes sysctl defaults, allocates
percpu arrays and creates /proc entries.
exit method reverts the above.
There are no pernet_operations, which are interested
in the above entities of foreign net namespace, so
inet6_net_ops are able to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ungraceful host shutdown or driver crash case BMC connectivity is
lost. APE firmware is missing the driver state in this
case to keep the BMC connectivity alive.
This patch has below change to address this issue.
Heartbeat mechanism with APE firmware. This heartbeat mechanism
is needed to notify the APE firmware about driver state.
This patch also has the change in wait time for APE event from
1ms to 20ms as there can be some delay in getting response.
v2: Drop inline keyword as per David suggestion.
Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com>
Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com>
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ADVERTISED_Asym_Pause bit was being improperly set when both
rx and tx pause were enabled. When rx and tx are both enabled, only
the ADVERTISED_Pause bit is supposed to be set.
Signed-off-by: Jake Moroni <mail@jakemoroni.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We had one report from syzkaller [1]
First issue is that INIT_WORK() should be done before mod_timer()
or we risk timer being fired too soon, even with a 1 second timer.
Second issue is that we need to reject too big info->timeout
to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or
risk looping, if result after overflow is 0.
[1]
WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
panic+0x1e4/0x41c kernel/panic.c:183
__warn+0x1dc/0x200 kernel/panic.c:547
report_bug+0x211/0x2d0 lib/bug.c:184
fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
fixup_bug arch/x86/kernel/traps.c:247 [inline]
do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988
RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
RSP: 0018:ffff8801db507538 EFLAGS: 00010006
RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404
RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082
RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c
R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6
R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000
queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488
queue_work include/linux/workqueue.h:488 [inline]
schedule_work include/linux/workqueue.h:546 [inline]
idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116
call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
expire_timers kernel/time/timer.c:1363 [inline]
__run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
__do_softirq+0x2d7/0xb85 kernel/softirq.c:285
invoke_softirq kernel/softirq.c:365 [inline]
irq_exit+0x1cc/0x200 kernel/softirq.c:405
exiting_irq arch/x86/include/asm/apic.h:541 [inline]
smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184
RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12
RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006
RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282
RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8
R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278
__debug_object_init+0x235/0x1040 lib/debugobjects.c:378
debug_object_init+0x17/0x20 lib/debugobjects.c:391
__init_work+0x2b/0x60 kernel/workqueue.c:506
idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline]
idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213
xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850
check_target net/ipv6/netfilter/ip6_tables.c:533 [inline]
find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575
translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744
do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline]
do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686
nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927
udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976
SYSC_setsockopt net/socket.c:1850 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1829
do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287
Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
__show_regs pretty prints PC and LR by attempting to map them to kernel
function names to improve the utility of crash reports. Unfortunately,
this mapping is applied even when the pt_regs corresponds to user mode,
resulting in a KASLR oracle.
Avoid this issue by only looking up the function symbols when the register
state indicates that we're actually running at EL1.
Cc: <stable@vger.kernel.org>
Reported-by: NCSC Security <security@ncsc.gov.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Stop printing a (ratelimited) kernel message for each instance of an
unimplemented syscall being called. Userland making an unimplemented
syscall is not necessarily misbehaviour and to be expected with a
current userland running on an older kernel. Also, the current message
looks scary to users but does not actually indicate a real problem nor
help them narrow down the cause. Just rely on sys_ni_syscall() to return
-ENOSYS.
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
aarch64 unhandled signal kernel messages are very verbose, suggesting
them to be more of a debugging aid:
sigsegv[33]: unhandled level 2 translation fault (11) at 0x00000000, esr
0x92000046, in sigsegv[400000+71000]
CPU: 1 PID: 33 Comm: sigsegv Tainted: G W 4.15.0-rc3+ #3
Hardware name: linux,dummy-virt (DT)
pstate: 60000000 (nZCv daif -PAN -UAO)
pc : 0x4003f4
lr : 0x4006bc
sp : 0000fffffe94a060
x29: 0000fffffe94a070 x28: 0000000000000000
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 00000000004001b0
x23: 0000000000486ac8 x22: 00000000004001c8
x21: 0000000000000000 x20: 0000000000400be8
x19: 0000000000400b30 x18: 0000000000484728
x17: 000000000865ffc8 x16: 000000000000270f
x15: 00000000000000b0 x14: 0000000000000002
x13: 0000000000000001 x12: 0000000000000000
x11: 0000000000000000 x10: 0008000020008008
x9 : 000000000000000f x8 : ffffffffffffffff
x7 : 0004000000000000 x6 : ffffffffffffffff
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 00000000004003e4 x2 : 0000fffffe94a1e8
x1 : 000000000000000a x0 : 0000000000000000
Disable them by default, so they can be enabled using
/proc/sys/debug/exception-trace.
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Our field definitions for CTR_EL0 suffer from a number of problems:
- The IDC and DIC fields are missing, which causes us to enable CTR
trapping on CPUs with either of these returning non-zero values.
- The ERG is FTR_LOWER_SAFE, whereas it should be treated like CWG as
FTR_HIGHER_SAFE so that applications can use it to avoid false sharing.
- [nit] A RES1 field is described as "RAO"
This patch updates the CTR_EL0 field definitions to fix these issues.
Cc: <stable@vger.kernel.org>
Cc: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The *while* loop in this function can be turned into a normal *for* loop.
And getting rid of the single return point saves us a few more LoCs...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Martin Blumenstingl says:
====================
dwmac-meson8b: small cleanup
This is a follow-up to my previous series "dwmac-meson8b: clock fixes for
Meson8b" from [0].
during the review of that series it was found that the clock registration
could be simplified. now that the previous series has landed we can start
cleaning up the clock registration.
the goal of this series is to simplify the code in the dwmac-meson8b
driver. no functional changes are intended.
I have tested this on my Khadas VIM2 (GXM SoC, with RGMII PHY) and my
Endless Mini (EC-100, Meson8b SoC with RMII PHY, .dts support is not part
of mainline yet). no problems were found.
[0] http://lists.infradead.org/pipermail/linux-amlogic/2018-January/006143.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The common clock framework needs access to the "clock configuration"
structs during runtime.
However, only the common clock framework should access these. Ensure
this by moving the configuration structs out of struct meson8b_dwmac,
so only meson8b_init_rgmii_tx_clk() and the common clock framework know
about these configurations.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nothing in the dwmac-meson8b driver (except .probe itself) requires the
platform_device anymore after .probe has finished. Replace it with a
pointer to struct device since this is what the functions inside the
driver are actually accessing.
No functional changes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To goal of this patch is to simplify the registration of the RGMII TX
clock (and it's parent clocks). This is achieved by:
- introducing the meson8b_dwmac_register_clk helper-function to remove
code duplication when registering a single clock (this saves a few
lines since we have 4 clocks internally)
- using devm_add_action_or_reset to disable the RGMII TX clock
automatically when needed. This also allows us to re-use the standard
stmmac_pltfr_remove function.
- devm_kasprintf() and devm_kstrdup() are not used anymore to generate
the clock name (these are replaced by a variable on the stack) because
the common clock framework already uses kstrdup() internally.
No functional changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When mlxsw replaces (or deletes) a route it removes the offload
indication from the replaced route. This is problematic for IPv4 routes,
as the offload indication is stored in the fib_info which is usually
shared between multiple routes.
Instead of unconditionally clearing the offload indication, only clear
it if no other route is using the fib_info.
Fixes: 3984d1a89fe7 ("mlxsw: spectrum_router: Provide offload indication using nexthop flags")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Tested-by: Alexander Petrovskiy <alexpe@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Subash Abhinov Kasiviswanathan says:
====================
net: qualcomm: rmnet: Fix issues with CONFIG_DEBUG_PREEMPT enabled
Patch 1 and 2 fixes issues identified when CONFIG_DEBUG_PREEMPT was
enabled. These involve APIs which were called in invalid contexts.
Patch 3 is a null derefence fix identified by code inspection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a command packet with invalid mux id is received, the packet would
not have a valid endpoint. This invalid endpoint maybe dereferenced
leading to a crash. Identified by manual code inspection.
Fixes: 3352e6c45760 ("net: qualcomm: rmnet: Convert the muxed endpoint to hlist")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
