| Age | Commit message (Collapse) | Author |
|---|
|
Merge this to catch up with the other patches sent upstream.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A selective retransmission request (SRR) is a fibre-channel
protocol control request which provides support for requesting
retransmission of a data sequence in response to an issue such as
frame loss or corruption. These events are experienced
infrequently in fibre-channel based networks which makes
it difficult to test and assess codepaths which handle these
events.
We were fortunate enough, for some definition of fortunate, to
have a metro-area single-mode SAN link which, at 10 GBPS
sustained load levels, would consistently generate SRR's in
a SCST based target implementation using our SCST/in-kernel
Qlogic target interface driver. In response to an SRR the
in-kernel Qlogic target driver immediately panics resulting
in a catastrophic storage failure for serviced initiators.
The culprit was a debug statement in the qla_target.c file which
does not verify that a pointer to the SCSI CDB is not null.
The unchecked pointer dereference results in the kernel panic
and resultant system failure.
The other two references to the SCSI CDB by the SRR handling code
use a ternary operator to verify a non-null pointer is being
acted on. This patch simply adds a similar test to the implicated
debug statement.
This patch is a candidate for any stable kernel being maintained
since it addresses a potentially catastrophic event with
minimal downside.
Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Cc: <stable@vger.kernel.org> #3.5+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
dm_pool_close_thin_device() must be called if dm_set_target_max_io_len()
fails in thin_ctr(). Otherwise __pool_destroy() will fail because the
pool will still have an open thin device:
device-mapper: thin metadata: attempt to close pmd when 1 device(s) are still open
device-mapper: thin: __pool_destroy: dm_pool_metadata_close() failed.
Also, must establish error code if failing thin_ctr() because the pool
is in fail_io mode.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull SELinux endianness fix from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
SELinux: bigendian problems with filename trans rules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 bug fixes from Martin Schwidefsky:
"A couple of s390 bug fixes. The PCI segment boundary issue is a nasty
one as it can lead to data corruption"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: Fix missing subchannels after CHPID configure on
s390/pci/dma: use correct segment boundary size
s390/compat: fix sys_sched_getattr compat wrapper
s390/zcrypt: additional check to avoid overflow in msg-type 6 requests
|
|
Stephane reported that perf report and annotate failed to process data
using lots of (> 500) shared libraries. It was because of the limit on
number of open files (ulimit -n).
Currently when perf loads a DSO, it'll look for normal and dynamic
symbol tables. And if it fails to find out both tables, it'll iterate
all of possible symtab types. But many of them are useless since they
have no additional information and the problem is that it's not closing
those files even though they're not used. Fix it.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392859976-32760-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The TUI of perf report and top support annotation, but stdio and GTK
don't. So it should be checked before calling hist_entry__inc_addr_
samples() to avoid wasting resources that will never be used.
perf annotate need it regardless of UI and sort keys, so the check
of whether to allocate resources should be on the tools that have
annotate as an option in the TUI, 'report' and 'top', not on the
function called by all of them.
It caused perf annotate on ppc64 to produce zero output, since the
buckets were not being allocated.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392859976-32760-1-git-send-email-namhyung@kernel.org
[ Renamed (report,top)__needs_annotate() to ui__has_annotation() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add the sched_setattr and sched_getattr syscalls to the generic syscall
list, which is used by the following architectures: arc, arm64, c6x,
hexagon, metag, openrisc, score, tile, unicore32.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: linux-c6x-dev@linux-c6x.org
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux@lists.openrisc.net
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
|
|
Xtensa fixes for 3.14:
- allow booting xtfpga on boards with new uBoot and >128MBytes memory;
- drop nonexistent GPIO32 support from fsf variant;
- don't select USE_GENERIC_SMP_HELPERS;
- enable common clock framework support, set up ethoc clock on xtfpga;
- wire up sched_setattr and sched_getattr syscalls.
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
into for-linus
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Mostly unexciting driver fixes, plus one fix to lower the severity of
the log message when we don't use an optional regulator - the fixes
for ACPI system made this come up more often and it was correctly
observed that it was causing undue concern for users"
* tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Fix invalid return value on DT parse success
regulator: core: Change dummy supplies error message to a warning
regulator: s5m8767: Add missing of_node_put
regulator: s5m8767: Use of_get_child_by_name
regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
|
|
Because then this sg is passed to sbc_copy_prot which will
hit a protection fault in cases we have more than a single sg.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch adds the three missing DIF related sense codes within
transport_generic_request_failure(), which are required to ensure
that the correct ASC/ASQC is generated by the subsequent call to
transport_send_check_condition_and_sense().
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch fixes a bug in sbc_dif_copy_prot() where the updated addr
offset did not take into account the case where the associated
scatterlist had not been incremented.
This addresses the case where incoming protection scatterlists may
contain a length smaller than PAGE_SIZE across multiple entires,
when the target protection scatterlists are always being explicitly
filled up to PAGE_SIZE before adding another entry.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch excludes reserved-marker byte-position from oobfree->length
calculation. Thus all bytes from oobfree->offset till end of OOB are free.
CC: <stable@vger.kernel.org> # 3.13.x+
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
1) In current implementation, ecclayout->oobfree->offset is calculated with
respect to ecclayout->eccpos[0] which is incorrect because ECC bytes may not
be stored contiguously in OOB.
So, this patch calculates ecclayout->oobfree->offset with respect to last
ECC byte-position 'eccpos[ecclayout->eccbytes-1]'.
2) ECC layout of some ecc-schemes expects reserved-markers at specific eccpos[]
which should not be over-written by any file-system metadata.
So this patch aligns oobfree->offset taking into account of such markers.
CC: <stable@vger.kernel.org> # 3.13.x+
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Fixes: commit a919e51161b58ed7e6e663daba99ab7d558808f3
mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
Fixes ecclayout mismatch introduced in above commit for following ecc-schemes:
- OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
However, this patch also touches other ecc-schemes as the fix required
refactoring common code, into ecc-scheme specific code.
This patch aligns ecc-layout for below ecc-schemes as per reference [1],[2],[3]
+---+------------+-------------++-------------+-------------+
|OOB|BCH8_CODE_HW|BCH8_CODE_HW_||HAM1_CODE_HW |HAM1_CODE_HW |
|pos| | DETECTION_SW||(x8 device) |(x16 device) |
+---+------------+-------------++-------------+-------------+
| 0 |BADBLK_MARK | BADBLK_MARK || BADBLK_MARK | BADBLK_MARK |
| 1 |BADBLK_MARK | BADBLK_MARK || eccpos[0] | BADBLK_MARK |
| 2 | eccpos[0] | eccpos[0] || eccpos[1] | eccpos[0] |
| 3 | eccpos[1] | eccpos[1] || eccpos[2] | eccpos[1] |
| 4 | eccpos[2] | eccpos[2] || eccpos[3] | eccpos[2] |
| 5 | eccpos[3] | eccpos[3] || eccpos[4] | eccpos[3] |
| 6 | eccpos[4] | eccpos[4] || eccpos[5] | eccpos[4] |
| 7 | eccpos[5] | eccpos[5] || eccpos[6] | eccpos[5] |
| 8 | eccpos[6] | eccpos[6] || eccpos[7] | eccpos[6] |
| 9 | eccpos[7] | eccpos[7] || eccpos[8] | eccpos[7] |
|10 | eccpos[8] | eccpos[8] || eccpos[9] | eccpos[8] |
|11 | eccpos[9] | eccpos[9] || eccpos[10] | eccpos[9] |
|12 | eccpos[10] | eccpos[10] || eccpos[11] | eccpos[10] |
|13 | eccpos[11] | eccpos[11] || oobfree[0] | eccpos[11] |
|14 | eccpos[12] | eccpos[12] || oobfree[1] | oobfree[0] |
|15 | eccpos[13] | <reserved> || oobfree[2] | oobfree[1] |
+---+------------+-------------++-------------+-------------+
|16 | eccpos[14] | eccpos[13] || oobfree[3] | oobfree[2] |
|...| [...] | [...] || [...] | [...] |
|56 | eccpos[54] | eccpos[51] || oobfree[43] | oobfree[42] |
|57 | eccpos[55] | <reserved> || oobfree[44] | oobfree[43] |
+===+============+=============+==============+=============+
|58 | oobfree[0] | oobfree[0] || oobfree[45] | oobfree[44] |
|59 | oobfree[1] | oobfree[1] || oobfree[46] | oobfree[45] |
|60 | oobfree[2] | oobfree[2] || oobfree[47] | oobfree[46] |
|61 | oobfree[3] | oobfree[3] || oobfree[48] | oobfree[47] |
|62 | oobfree[4] | oobfree[4] || oobfree[49] | oobfree[48] |
|63 | oobfree[5] | oobfree[5] || oobfree[50] | oobfree[49] |
+---+------------+-------------+--------------+-------------+
[1] ecc-layout expected by ROM code, as specified in SoC TRM under:
Chapter="Initialization"
Section="Device Initialization by ROM code"
Sub-Section="Memory Booting"
Heading="NAND"
Figure="ECC Locations in NAND Spare Areas"
[2] ecc-layout updates in u-boot
http://lists.denx.de/pipermail/u-boot/2013-November/167551.html
[3] u-boot configurations to match above ecc-layout are documented at
https://processors.wiki.ti.com/index.php/Linux_Core_NAND_User%27s_Guide
CC: <stable@vger.kernel.org> # 3.13.x+
Reported-by: Enric Balletbo Serra <eballetbo@iseebcn.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Serialize the registration of a new sched_clock in the currently ARM
only generic sched_clock facilty to avoid sched_clock havoc"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched_clock: Prevent callers from seeing half-updated data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- a bugfix which prevents a divide by 0 panic when the newly introduced
try_msr_calibrate_tsc() fails
- enablement of the Baytrail platform to utilize the newfangled msr
based calibration
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: tsc: Add missing Baytrail frequency to the table
x86, tsc: Fallback to normal calibration if fast MSR calibration fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Another four fixlets to tame the ARM orion irq chip"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: orion: Fix getting generic chip pointer.
irqchip: orion: clear stale interrupts in irq_startup
irqchip: orion: use handle_edge_irq on bridge irqs
irqchip: orion: clear bridge cause register on init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for reported issues for 3.14-rc4
The majority of these are for USB gadget, phy, and musb driver issues.
And there's a few new device ids thrown in for good measure"
* tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: need to mask when writting endptflush and endptprime
usb: musb: correct use of schedule_delayed_work()
usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
usb: gadget: fix NULL pointer dereference
usb: gadget: printer: using gadget_is_otg to check otg support at runtime
phy: let phy_provider_register be the last step in registering PHY
phy-core: Don't allow building phy-core as a module
phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller
phy-core: phy_get: Leave error logging to the caller
phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM
usb: musb: correct use of schedule_delayed_work()
usb: musb: do not sleep in atomic context
USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8
USB: EHCI: add delay during suspend to prevent erroneous wakeups
usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
usb: musb: do not sleep in atomic context
usb: gadget: s3c2410_udc: Fix build error
usb: musb: core: Fix remote-wakeup resume
usb: musb: host: Fix SuperSpeed hub enumeration
usb: musb: fix obex in g_nokia.ko causing kernel panic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY revert from Greg KH:
"Here is a single commit, a revert of a sysfs file change that ended up
breaking a userspace tool"
* tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: Set correct tty name in 'active' sysfs attribute"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fix from Greg KH:
"Here is a single android driver fix for 3.14-rc4 that fixes a reported
problem in the binder driver"
* tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: binder: Fix death notifications
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single commit, to fix a reported problem in the mei driver"
* tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: set client's read_cb to NULL when flow control fails
|
|
Add myself as an additional maintainer for the Broadcom mobile
SoCs.
Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Christian Daudt <bcm@fixthebug.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus
|
|
|
|
'asoc/fix/wm8770', 'asoc/fix/wm8900' and 'asoc/fix/wm8994' into asoc-linus
|
|
into asoc-linus
|
|
|
|
ASoC: Fixes for v3.14
A few fixes, all driver speccific ones. The DaVinci ones aren't as
clear as they should be from the subject lines on the commits but they
fix issues which will prevent correct operation in some use cases and
only affect that particular driver so are reasonably safe.
# gpg: Signature made Wed 19 Feb 2014 13:23:13 JST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
|
|
codec->control_data contains a pointer to the regmap struct of the device, not
to the device private data. Use snd_soc_codec_get_drvdata() instead.
The issue was introduced in commit 29fdf4fbbe ("ASoC: sta32x: Convert to
regmap").
Fixes: 29fdf4fbbe (ASoC: sta32x: Convert to regmap)
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
|
|
This reverts commit d8a5dc3033af2fd6d16030d2ee4fbd073460fe54.
This breaks plymouth installs, either because plymouth is using the file
"incorrectly" or because the patch is incorrect. Either way, this needs
to be reverted until it is all figured out.
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: Ray Strode <halfline@gmail.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Werner Fink <werner@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixlets: a fair number of them resulting from the new
SCHED_DEADLINE code"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Remove useless dl_nr_total
sched/deadline: Test for CPU's presence explicitly
sched: Add 'flags' argument to sched_{set,get}attr() syscalls
sched: Fix information leak in sys_sched_getattr()
sched,numa: add cond_resched to task_numa_work
sched/core: Make dl_b->lock IRQ safe
sched/core: Fix sched_rt_global_validate
sched/deadline: Fix overflow to handle period==0 and deadline!=0
sched/deadline: Fix bad accounting of nr_running
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixlets from all around the place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table
perf/x86: Correctly use FEATURE_PDCM
perf, nmi: Fix unknown NMI warning
perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches
perf trace: Add fallback definition of EFD_SEMAPHORE
perf list: Fix checking for supported events on older kernels
perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly
perf probe: Do not add offset twice to uprobe address
perf/x86: Fix Userspace RDPMC switch
perf/x86/intel/p6: Add userspace RDPMC quirk for PPro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix writing the minimum temperature in max1668 driver"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Fix writing the minimum temperature
|
|
Pull xfs fixes from Dave Chinner:
"This is the first pull request I've had to do for you, so I'm still
sorting things out. The reason I'm sending this and not Ben should be
obvious from the first commit below - SGI has stepped down from the
XFS maintainership role. As such, I'd like to take another
opportunity to thank them for their many years of effort maintaining
XFS and supporting the XFS community that they developed from the
ground up.
So I haven't had time to work things like signed tags into my
workflows yet, so this is just a repo branch I'm asking you to pull
from. And yes, I named the branch -rc4 because I wanted the fixes in
rc4, not because the branch was for merging into -rc3. Probably not
right, either.
Anyway, I should have everything sorted out by the time the next merge
window comes around. If there's anything that you don't like in the
pull req, feel free to flame me unmercifully.
The changes are fixes for recent regressions and important thinkos in
verification code:
- a log vector buffer alignment issue on ia32
- timestamps on truncate got mangled
- primary superblock CRC validation fixes and error message
sanitisation"
* 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: limit superblock corruption errors to actual corruption
xfs: skip verification on initial "guess" superblock read
MAINTAINERS: SGI no longer maintaining XFS
xfs: xfs_sb_read_verify() doesn't flag bad crcs on primary sb
xfs: ensure correct log item buffer alignment
xfs: ensure correct timestamp updates from truncate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Handle PERF_RECORD_HEADER_EVENT_TYPE properly. (Jiri Olsa)
* Fix checking for supported events on older kernels in
'perf list' (Vince Weaver)
* Do not add offset twice to uprobe address in
'perf probe' (Masami Hiramatsu)
* Fix perf trace's ioctl 'request' beautifier build problems
on !(i386 || x86_64) arches (Arnaldo Carvalho de Melo)
* Fix 'perf trace' build by adding a fallback definition for
EFD_SEMAPHORE (Ben Hutchings)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This fixes bug introduced in 667a6b7a (regulator: max14577: Add missing
of_node_put). The DTS parsing function returned number of matched
regulators as success status which then was compared against 0 in probe.
Result was a probe fail after successful parsing the DTS:
max14577-regulator: probe of max14577-regulator failed with error 2
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviwed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
This reverts commit c4a391b53a72d2df4ee97f96f78c1d5971b47489. Dave
Chinner <david@fromorbit.com> has reported the commit may cause some
inodes to be left out from sync(2). This is because we can call
redirty_tail() for some inode (which sets i_dirtied_when to current time)
after sync(2) has started or similarly requeue_inode() can set
i_dirtied_when to current time if writeback had to skip some pages. The
real problem is in the functions clobbering i_dirtied_when but fixing
that isn't trivial so revert is a safer choice for now.
CC: stable@vger.kernel.org # >= 3.13
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
into irq/urgent
irqchip mvebu fixes for v3.14
- orion:
- fixes for clearing bridge cause register, and clearing stale interrupts
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Pull devicetree fixes from Grant Likely:
"Device tree compatible match order bug fix
This branch contains a bug fix for the way devicetree code identifies
the type of device. Device drivers can contain a list of
of_device_ids, but it more than one entry will match, then the device
driver may choose the wrong one. Commit 105353145e, "match each node
compatible against all given matches first", was queued for v3.14 but
ended up causing other bugs. Commit 06b29e76a7 attempted to fix it
but it had other bugs. Merely reverting the fix and waiting until
v3.15 isn't a good option because there is code in v3.14 that depends
on the revised behaviour to boot.
This branch should finally fixes the problem correctly. This time
instead of just hoping that the patch is correct, this branch also
adds new testcases that validate the behaviour.
The changes in this branch are larger than I would like for a -rc
pull, but moving the test case data out of out of arch/arm so that it
could be validated on other architectures was important"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
of: Add self test for of_match_node()
of: Move testcase FDT data into drivers/of
of: reimplement the matching method for __of_match_node()
Revert "of: search the best compatible match first in __of_match_node()"
|
|
Pull watchdog fix from Wim Van Sebroeck:
"It corrects the error code when no device was found for w83697hf_wdt"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: w83697hf_wdt: return ENODEV if no device was found
|
|
Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt
handler. The bridge interrupt is implemented using a single generic
chip. Thus the parameter passed to irq_get_domain_generic_chip()
should always be zero.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Fixes: 9dbd90f17e4f ("irqchip: Add support for Marvell Orion SoCs")
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
This patch updates the CBOX PMU filters mapping tables for SNB-EP
and IVT (model 45 and 62 respectively).
The NID umask always comes in addition to another umask.
When set, the NID filter is applied.
The current mapping tables were missing some code/umask
combinations to account for the NID umask. This patch
fixes that.
Cc: mingo@elte.hu
Cc: ak@linux.intel.com
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140219131018.GA24475@quad
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The current code simply assumes Intel Arch PerfMon v2+ to have
the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check
CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead.
This was found by KVM which implements v2+ but didn't provide the
capabilities MSR. Change the code to DTRT; KVM will also implement the
MSR and return 0.
Cc: pbonzini@redhat.com
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When using BTS on Core i7-4*, I get the below kernel warning.
$ perf record -c 1 -e branches:u ls
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2.
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317920] Do you have a strange power saving mode enabled?
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317945] Dazed and confused, but trying to continue
Make intel_pmu_handle_irq() take the full exit path when returning early.
Cc: eranian@google.com
Cc: peterz@infradead.org
Cc: mingo@kernel.org
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.
Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
