summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-11Merge tag 'for-5.19-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A more fixes that seem to me to be important enough to get merged before release: - in zoned mode, fix leak of a structure when reading zone info, this happens on normal path so this can be significant - in zoned mode, revert an optimization added in 5.19-rc1 to finish a zone when the capacity is full, but this is not reliable in all cases - try to avoid short reads for compressed data or inline files when it's a NOWAIT read, applications should handle that but there are two, qemu and mariadb, that are affected" * tag 'for-5.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: drop optimization of zone finish btrfs: zoned: fix a leaked bioc in read_zone_info btrfs: return -EAGAIN for NOWAIT dio reads/writes on compressed and inline extents
2022-07-11Merge tags 'free-mq_sysctls-for-v5.19' and 'ptrace_unfreeze_fix-for-v5.19' ↵Linus Torvalds
of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ipc namespace fix from Eric Biederman: "This fixes a bug with error handling if ipc creation fails that was reported by syzbot" For completeness, this also pulls the ptrace_unfreeze_fix tag that contains the original version of one of the hotfixes that I manually applied earlier so that it would be fixed in rc6. * tag 'free-mq_sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ipc: Free mq_sysctls if ipc namespace creation failed * tag 'ptrace_unfreeze_fix-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: fix clearing of JOBCTL_TRACED in ptrace_unfreeze_traced()
2022-07-11lockd: fix nlm_close_filesJeff Layton
This loop condition tries a bit too hard to be clever. Just test for the two indices we care about explicitly. Cc: J. Bruce Fields <bfields@fieldses.org> Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file") Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-07-11Merge tag 'mm-hotfixes-stable-2022-07-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Mainly MM fixes. About half for issues which were introduced after 5.18 and the remainder for longer-term issues" * tag 'mm-hotfixes-stable-2022-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: split huge PUD on wp_huge_pud fallback nilfs2: fix incorrect masking of permission flags for symlinks mm/rmap: fix dereferencing invalid subpage pointer in try_to_migrate_one() riscv/mm: fix build error while PAGE_TABLE_CHECK enabled without MMU Documentation: highmem: use literal block for code example in highmem.h comment mm: sparsemem: fix missing higher order allocation splitting mm/damon: use set_huge_pte_at() to make huge pte old sh: convert nommu io{re,un}map() to static inline functions mm: userfaultfd: fix UFFDIO_CONTINUE on fallocated shmem pages
2022-07-11lockd: set fl_owner when unlocking filesJeff Layton
Unlocking a POSIX lock on an inode with vfs_lock_file only works if the owner matches. Ensure we set it in the request. Cc: J. Bruce Fields <bfields@fieldses.org> Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file") Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-07-11Merge tag 'modules-5.19-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module fixes from Luis Chamberlain: "Although most of the move of code in in v5.19-rc1 should have not introduced a regression patch review on one of the file changes captured a checkpatch warning which advised to use strscpy() and it caused a buffer overflow when an incorrect length is passed. Another change which checkpatch complained about was an odd RCU usage, but that was properly addressed in a separate patch to the move by Aaron. That caused a regression with PREEMPT_RT=y due to an unbounded latency. This series fixes both and adjusts documentation which we forgot to do for the move" * tag 'modules-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: kallsyms: Ensure preemption in add_kallsyms() with PREEMPT_RT doc: module: update file references module: Fix "warning: variable 'exit' set but not used" module: Fix selfAssignment cppcheck warning modules: Fix corruption of /proc/kallsyms
2022-07-11bcm63xx: fix Tx cleanup when NAPI poll budget is zeroSieng-Piaw Liew
NAPI poll() function may be passed a budget value of zero, i.e. during netpoll, which isn't NAPI context. Therefore, napi_consume_skb() must be given budget value instead of !force to truly discern netpoll-like scenarios. Fixes: c63c615e22eb ("bcm63xx_enet: switch to napi_build_skb() to reuse skbuff_heads") Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com> Link: https://lore.kernel.org/r/20220708080303.298-1-liew.s.piaw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11NFSD: Decode NFSv4 birth time attributeChuck Lever
NFSD has advertised support for the NFSv4 time_create attribute since commit e377a3e698fb ("nfsd: Add support for the birth time attribute"). Igor Mammedov reports that Mac OS clients attempt to set the NFSv4 birth time attribute via OPEN(CREATE) and SETATTR if the server indicates that it supports it, but since the above commit was merged, those attempts now fail. Table 5 in RFC 8881 lists the time_create attribute as one that can be both set and retrieved, but the above commit did not add server support for clients to provide a time_create attribute. IMO that's a bug in our implementation of the NFSv4 protocol, which this commit addresses. Whether NFSD silently ignores the new birth time or actually sets it is another matter. I haven't found another filesystem service in the Linux kernel that enables users or clients to modify a file's birth time attribute. This commit reflects my (perhaps incorrect) understanding of whether Linux users can set a file's birth time. NFSD will now recognize a time_create attribute but it ignores its value. It clears the time_create bit in the returned attribute bitmask to indicate that the value was not used. Reported-by: Igor Mammedov <imammedo@redhat.com> Fixes: e377a3e698fb ("nfsd: Add support for the birth time attribute") Tested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-07-11Merge branch 'octeontx2-exact-match-table'Jakub Kicinski
Ratheesh Kannoth says: ==================== octeontx2: Exact Match Table. Exact match table and Field hash support for CN10KB silicon ==================== Link: https://lore.kernel.org/r/20220708044151.2972645-1-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Enable Exact match flag in kex profileRatheesh Kannoth
Enabled EXACT match flag in Kex default profile. Since there is no space in key, NPC_PARSE_NIBBLE_ERRCODE is removed Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-pf: Add support for exact match table.Ratheesh Kannoth
NPC exact match table can support more entries than RPM dmac filters. This requires field size of DMAC filter count and index to be increased. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Invoke exact match functions if supportedRatheesh Kannoth
If exact match table is supported, call functions to add/del/update entries in exact match table instead of RPM dmac filters Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Wrapper functions for MAC addr add/del/update/resetRatheesh Kannoth
These functions are wrappers for mac add/addr/del/update in exact match table. These will be invoked from mbox handler routines if exact matct table is supported and enabled. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2: Modify mbox request and response structuresRatheesh Kannoth
Exact match table modification requires wider fields as it has more number of slots to fill in. Modifying an entry in exact match table may cause hash collision and may be required to delete entry from 4-way 2K table and add to fully associative 32 entry CAM table. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Debugsfs support for exact match.Ratheesh Kannoth
There debugfs files created. 1. General information on exact match table 2. Exact match table entries. 3. NPC mcam drop on hit count stats. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Drop rules for NPC MCAMRatheesh Kannoth
NPC exact match table installs drop on hit rules in NPC mcam for each channel. This rule has broadcast and multicast bits cleared. Exact match bit cleared and channel bits set. If exact match table hit bit is 0, corresponding NPC mcam drop rule will be hit for the packet and will be dropped. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: FLR handler for exact match table.Ratheesh Kannoth
FLR handler should remove/free all exact match table resources corresponding to each interface. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: devlink configuration supportRatheesh Kannoth
CN10KB silicon supports Exact match feature. This feature can be disabled through devlink configuration. Devlink command fails if DMAC filter rules are already present. Once disabled, legacy RPM based DMAC filters will be configured. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Exact match scan from kex profileRatheesh Kannoth
CN10KB silicon supports exact match table. Scanning KEX profile should check for exact match feature is enabled and then set profile masks properly. These kex profile masks are required to configure NPC MCAM drop rules. If there is a miss in exact match table, these drop rules will drop those packets. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Exact match supportRatheesh Kannoth
CN10KB silicon has support for exact match table. This table can be used to match maimum 64 bit value of KPU parsed output. Hit/non hit in exact match table can be used as a KEX key to NPC mcam. This patch makes use of Exact match table to increase number of DMAC filters supported. NPC mcam is no more need for each of these DMAC entries as will be populated in Exact match table. This patch implements following 1. Initialization of exact match table only for CN10KB. 2. Add/del/update interface function for exact match table. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11octeontx2-af: Use hashed field in MCAM keyRatheesh Kannoth
CN10KB variant of CN10K series of silicons supports a new feature where in a large protocol field (eg 128bit IPv6 DIP) can be condensed into a small hashed 32bit data. This saves a lot of space in MCAM key and allows user to add more protocol fields into the filter. A max of two such protocol data can be hashed. This patch adds support for hashing IPv6 SIP and/or DIP. Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11module: kallsyms: Ensure preemption in add_kallsyms() with PREEMPT_RTAaron Tomlin
The commit 08126db5ff73 ("module: kallsyms: Fix suspicious rcu usage") under PREEMPT_RT=y, disabling preemption introduced an unbounded latency since the loop is not fixed. This change caused a regression since previously preemption was not disabled and we would dereference RCU-protected pointers explicitly. That being said, these pointers cannot change. Before kallsyms-specific data is prepared/or set-up, we ensure that the unformed module is known to be unique i.e. does not already exist (see load_module()). Therefore, we can fix this by using the common and more appropriate RCU flavour as this section of code can be safely preempted. Reported-by: Steven Rostedt <rostedt@goodmis.org> Fixes: 08126db5ff73 ("module: kallsyms: Fix suspicious rcu usage") Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-11Merge tag 'vfio-v5.19-rc7' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fix from Alex Williamson: - Move IOMMU test to unbreak no-iommu support (Jason Gunthorpe) * tag 'vfio-v5.19-rc7' of https://github.com/awilliam/linux-vfio: vfio: Move IOMMU_CAP_CACHE_COHERENCY test to after we know we have a group
2022-07-11fix race between exit_itimers() and /proc/pid/timersOleg Nesterov
As Chris explains, the comment above exit_itimers() is not correct, we can race with proc_timers_seq_ops. Change exit_itimers() to clear signal->posix_timers with ->siglock held. Cc: <stable@vger.kernel.org> Reported-by: chris@accessvector.net Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-11ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 modelMeng Tang
There is another HP ProDesk 600 G3 model with the PCI SSID 103c:82b4 that requires the quirk HP_MIC_NO_PRESENCE. Add the corresponding entry to the quirk table. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220711101744.25189-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-11ALSA: hda/realtek: Fix headset mic for Acer SF313-51Meng Tang
The issue on Acer SWIFT SF313-51 is that headset microphone doesn't work. The following quirk fixed headset microphone issue. Note that the fixup of SF314-54/55 (ALC256_FIXUP_ACER_HEADSET_MIC) was not successful on my SF313-51. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220711081527.6254-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-11fddi/skfp: fix repeated words in commentsJilin Yuan
Delete the redundant word 'test'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-11ethernet/via: fix repeated words in commentsJilin Yuan
Delete the redundant word 'driver'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-11net: Find dst with sk's xfrm policy not ctl_sksewookseo
If we set XFRM security policy by calling setsockopt with option IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock' struct. However tcp_v6_send_response doesn't look up dst_entry with the actual socket but looks up with tcp control socket. This may cause a problem that a RST packet is sent without ESP encryption & peer's TCP socket can't receive it. This patch will make the function look up dest_entry with actual socket, if the socket has XFRM policy(sock_policy), so that the TCP response packet via this function can be encrypted, & aligned on the encrypted TCP socket. Tested: We encountered this problem when a TCP socket which is encrypted in ESP transport mode encryption, receives challenge ACK at SYN_SENT state. After receiving challenge ACK, TCP needs to send RST to establish the socket at next SYN try. But the RST was not encrypted & peer TCP socket still remains on ESTABLISHED state. So we verified this with test step as below. [Test step] 1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED). 2. Client tries a new connection on the same TCP ports(src & dst). 3. Server will return challenge ACK instead of SYN,ACK. 4. Client will send RST to server to clear the SOCKET. 5. Client will retransmit SYN to server on the same TCP ports. [Expected result] The TCP connection should be established. Cc: Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Sehee Lee <seheele@google.com> Signed-off-by: Sewook Seo <sewookseo@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-11mt76: mt7921: Let PCI core handle power state and use pm_sleep_ptr()Kai-Heng Feng
PCI power state and wakeup are already handled by PCI core, so it's not necessary to handle them in the driver. Also switch to use pm_sleep_ptr() to remove #ifdef guard. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mediatek: mt76: eeprom: fix missing of_node_put() in ↵Liang He
mt76_find_power_limits_node() We should use of_node_put() for the reference 'np' returned by of_get_child_by_name() which will increase the refcount. Fixes: 22b980badc0f ("mt76: add functions for parsing rate power limits from DT") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mediatek: mt76: mac80211: Fix missing of_node_put() in mt76_led_init()Liang He
We should use of_node_put() for the reference 'np' returned by of_get_child_by_name() which will increase the refcount. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: get rid of mt76_wcid_hw routineLorenzo Bianconi
mt76_wcid_hw() is no longer used. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: convert MT_TX_HW_QUEUE_EXT_PHY to MT_TX_HW_QUEUE_PHYLorenzo Bianconi
Report phy_indx in tx_info->hw_queue. This is a preliminary patch to add newer chipset support Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: add phy_idx to mt76_wcidLorenzo Bianconi
Introduce phy_idx to mt76_wcid structure instead of ext_phy. This is a preliminary patch to add newer chipset support. Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: introduce phys array in mt76_dev structureLorenzo Bianconi
Introduce phys array in mt76_dev structure to reference mt76_phy supported by the chipset. This is a preliminary patch to introduce newer chipset support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: add phy_idx in mt76_rx_statusLorenzo Bianconi
Introduce phy_idx mt76_rx_status instead of ext_idx. This is a preliminary patch to add newer chipset support Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: introduce MT_RXQ_BAND2 and MT_RXQ_BAND2_WA in mt76_rxq_idLorenzo Bianconi
Rename MT_RXQ_EXT in MT_RXQ_BAND1. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: add len parameter to __mt76_mcu_msg_alloc signatureLorenzo Bianconi
Introduce len to __mt76_mcu_msg_alloc signature in order to add the capability to specify two different value for allocation and copy length. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7915 add ht mpdu densityMeiChia Chiu
set ht mpdu density to 4 usec. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: reduce the mutex lock scope during resetSean Wang
Reduce the mutex lock scope for reset to get rid of possible task hung e.g wpa_supplicant and to allow the user-space process to keep running during we need more retries to complete the reset. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Suggested-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: reduce log severity levels for informative messagesSean Wang
Use dev_dbg instead for the diagnostic messages. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move tx initialization/cleanup in mt76_connac moduleLorenzo Bianconi
Move mt76_connac_init_tx_queues and mt76_connac_tx_cleanup routines in mt76_connac module. This is a preliminary patch to add mt7990 chipset support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: make mt7921_pci_driver staticLorenzo Bianconi
mt7921_pci_driver struct is only referenced in mt7921/pci.c so make it static. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: enable HW beacon filter in the initialization stageSean Wang
The current driver has worked with HW beacon filter and connection monitor all the way, here we move the enablement into the initialization stage like other HW features being done to get rid of others are confused why these configurations would be changed at runtime. We still leave a way to turn off these offload features in debugfs knobs but that is just for debugging purposes. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: enable HW beacon filter not depending on PM flagSean Wang
The hardware beacon filter works whether or not the PM flag is set, so we drop redundant dependency checks on PM flags. Additionally, the patch implicitly allow the MT7921[E, S, U] to have a consistent configuration of the hardware beacon filter. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: remove q->qidFelix Fietkau
It is no longer used Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: do not use skb_set_queue_mapping for internal purposesFelix Fietkau
Previously the code used skb_set_queue_mapping for management or non-bufferable powersave frames that need to be sent to a different hardware queue. This can confuse AQL, which expects the value to remain the same until the tx status report. The only place that currently uses the altered skb queue mapping is the txwi write function. Change the code to pass the hardware queue id as a function parameter instead. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: pass original queue id from __mt76_tx_queue_skb to the driverFelix Fietkau
MT7615 and newer map multiple software tx queues to the hardware id Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7615: fix throughput regression on DFS channelsFelix Fietkau
For some reason, mt7615 reacts badly to repeatedly enabling/disabling the radar detector without also switching the channel. This results in very bad throughput on DFS channels, because hw->conf.radar_enabled can get toggled a few times after CAC ends. Fix this by always leaving the DFS detector enabled on DFS channels and instead suppress unwanted detection events. Fixes: 2c86f6752046 ("mt76: mt7615: fix/rewrite the dfs state handling logic") Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 00:34:35 +0000