summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-09-06fuse: remove unused arg in fuse_write_file_get()Miklos Szeredi
The struct fuse_conn argument is not used and can be removed. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-09-06fuse: wait for writepages in syncfsMiklos Szeredi
In case of fuse the MM subsystem doesn't guarantee that page writeback completes by the time ->sync_fs() is called. This is because fuse completes page writeback immediately to prevent DoS of memory reclaim by the userspace file server. This means that fuse itself must ensure that writes are synced before sending the SYNCFS request to the server. Introduce sync buckets, that hold a counter for the number of outstanding write requests. On syncfs replace the current bucket with a new one and wait until the old bucket's counter goes down to zero. It is possible to have multiple syncfs calls in parallel, in which case there could be more than one waited-on buckets. Descendant buckets must not complete until the parent completes. Add a count to the child (new) bucket until the (parent) old bucket completes. Use RCU protection to dereference the current bucket and to wake up an emptied bucket. Use fc->lock to protect against parallel assignments to the current bucket. This leaves just the counter to be a possible scalability issue. The fc->num_waiting counter has a similar issue, so both should be addressed at the same time. Reported-by: Amir Goldstein <amir73il@gmail.com> Fixes: 2d82ab251ef0 ("virtiofs: propagate sync() to file server") Cc: <stable@vger.kernel.org> # v5.14 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-09-06Documentation: Add documentation for VDUSEXie Yongji
VDUSE (vDPA Device in Userspace) is a framework to support implementing software-emulated vDPA devices in userspace. This document is intended to clarify the VDUSE design and usage. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-14-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vduse: Introduce VDUSE - vDPA Device in UserspaceXie Yongji
This VDUSE driver enables implementing software-emulated vDPA devices in userspace. The vDPA device is created by ioctl(VDUSE_CREATE_DEV) on /dev/vduse/control. Then a char device interface (/dev/vduse/$NAME) is exported to userspace for device emulation. In order to make the device emulation more secure, the device's control path is handled in kernel. A message mechnism is introduced to forward some dataplane related control messages to userspace. And in the data path, the DMA buffer will be mapped into userspace address space through different ways depending on the vDPA bus to which the vDPA device is attached. In virtio-vdpa case, the MMU-based software IOTLB is used to achieve that. And in vhost-vdpa case, the DMA buffer is reside in a userspace memory region which can be shared to the VDUSE userspace processs via transferring the shmfd. For more details on VDUSE design and usage, please see the follow-on Documentation commit. NB(mst): when merging this with b542e383d8c0 ("eventfd: Make signal recursion protection a task bit") replace eventfd_signal_count with eventfd_signal_allowed, and drop the previous ("eventfd: Export eventfd_wake_count to modules"). Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-13-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vduse: Implement an MMU-based software IOTLBXie Yongji
This implements an MMU-based software IOTLB to support mapping kernel dma buffer into userspace dynamically. The basic idea behind it is treating MMU (VA->PA) as IOMMU (IOVA->PA). The software IOTLB will set up MMU mapping instead of IOMMU mapping for the DMA transfer so that the userspace process is able to use its virtual address to access the dma buffer in kernel. To avoid security issue, a bounce-buffering mechanism is introduced to prevent userspace accessing the original buffer directly which may contain other kernel data. During the mapping, unmapping, the software IOTLB will copy the data from the original buffer to the bounce buffer and back, depending on the direction of the transfer. And the bounce-buffer addresses will be mapped into the user address space instead of the original one. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-12-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vdpa: Support transferring virtual addressing during DMA mappingXie Yongji
This patch introduces an attribute for vDPA device to indicate whether virtual address can be used. If vDPA device driver set it, vhost-vdpa bus driver will not pin user page and transfer userspace virtual address instead of physical address during DMA mapping. And corresponding vma->vm_file and offset will be also passed as an opaque pointer. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()Xie Yongji
The upcoming patch is going to support VA mapping/unmapping. So let's factor out the logic of PA mapping/unmapping firstly to make the code more readable. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-10-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()Xie Yongji
Add an opaque pointer for DMA mapping. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-9-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vhost-iotlb: Add an opaque pointer for vhost IOTLBXie Yongji
Add an opaque pointer for vhost IOTLB. And introduce vhost_iotlb_add_range_ctx() to accept it. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-8-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vhost-vdpa: Handle the failure of vdpa_reset()Xie Yongji
The vdpa_reset() may fail now. This adds check to its return value and fail the vhost_vdpa_open(). Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-7-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vdpa: Add reset callback in vdpa_config_opsXie Yongji
This adds a new callback to support device specific reset behavior. The vdpa bus driver will call the reset function instead of setting status to zero during resetting. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20210831103634.33-6-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06vdpa: Fix some coding style issuesXie Yongji
Fix some code indent issues and following checkpatch warning: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' 371: FILE: include/linux/vdpa.h:371: +static inline void vdpa_get_config(struct vdpa_device *vdev, unsigned offset, Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-5-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06file: Export receive_fd() to modulesXie Yongji
Export receive_fd() so that some modules can use it to pass file descriptor between processes without missing any security stuffs. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-4-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06eventfd: Export eventfd_wake_count to modulesXie Yongji
Export eventfd_wake_count so that some modules can use the eventfd_signal_count() to check whether the eventfd_signal() call should be deferred to a safe context. NB(mst): this patch is not needed in Linus tree since there eventfd_signal_count() has been superseded by an already exported eventfd_signal_allowed(). Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20210831103634.33-3-xieyongji@bytedance.com Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06iova: Export alloc_iova_fast() and free_iova_fast()Xie Yongji
Export alloc_iova_fast() and free_iova_fast() so that some modules can make use of the per-CPU cache to get rid of rbtree spinlock in alloc_iova() and free_iova() during IOVA allocation. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210831103634.33-2-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06virtio-blk: remove unneeded "likely" statementsMax Gurtovoy
Usually we use "likely/unlikely" to optimize the fast path. Remove redundant "likely/unlikely" statements in the control path to simplify the code and make it easier to read. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Link: https://lore.kernel.org/r/20210905085717.7427-1-mgurtovoy@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-09-06virtio-balloon: Use virtio_find_vqs() helperXianting Tian
Use the helper virtio_find_vqs(). Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210723054259.2779-1-xianting.tian@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is ↵Zelin Deng
adjusted When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature especially there's a big tsc warp (like a new vCPU is hot-added into VM which has been up for a long time), tsc_offset is added by a large value then go back to guest. This causes system time jump as tsc_timestamp is not adjusted in the meantime and pvclock monotonic character. To fix this, just notify kvm to update vCPU's guest time before back to guest. Cc: stable@vger.kernel.org Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1619576521-81399-2-git-send-email-zelin.deng@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06KVM: MMU: mark role_regs and role accessors as maybe unusedPaolo Bonzini
It is reasonable for these functions to be used only in some configurations, for example only if the host is 64-bits (and therefore supports 64-bit guests). It is also reasonable to keep the role_regs and role accessors in sync even though some of the accessors may be used only for one of the two sets (as is the case currently for CR4.LA57).. Because clang reports warnings for unused inlines declared in a .c file, mark both sets of accessors as __maybe_unused. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06KVM: MIPS: Remove a "set but not used" variableHuacai Chen
This fix a build warning: arch/mips/kvm/vz.c: In function '_kvm_vz_restore_htimer': >> arch/mips/kvm/vz.c:392:10: warning: variable 'freeze_time' set but not used [-Wunused-but-set-variable] 392 | ktime_t freeze_time; | ^~~~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Message-Id: <20210406024911.2008046-1-chenhuacai@loongson.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06Merge tag 'kvmarm-5.15' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 5.15 - Page ownership tracking between host EL1 and EL2 - Rely on userspace page tables to create large stage-2 mappings - Fix incompatibility between pKVM and kmemleak - Fix the PMU reset state, and improve the performance of the virtual PMU - Move over to the generic KVM entry code - Address PSCI reset issues w.r.t. save/restore - Preliminary rework for the upcoming pKVM fixed feature - A bunch of MM cleanups - a vGIC fix for timer spurious interrupts - Various cleanups
2021-09-06Merge tag 'kvm-s390-next-5.15-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix and feature for 5.15 - enable interpretion of specification exceptions - fix a vcpu_idx vs vcpu_id mixup
2021-09-06x86/kvm: Don't enable IRQ when IRQ enabled in kvm_waitLai Jiangshan
Commit f4e61f0c9add3 ("x86/kvm: Fix broken irq restoration in kvm_wait") replaced "local_irq_restore() when IRQ enabled" with "local_irq_enable() when IRQ enabled" to suppress a warnning. Although there is no similar debugging warnning for doing local_irq_enable() when IRQ enabled as doing local_irq_restore() in the same IRQ situation. But doing local_irq_enable() when IRQ enabled is no less broken as doing local_irq_restore() and we'd better avoid it. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20210814035129.154242-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06KVM: stats: Add VM stat for remote tlb flush requestsJing Zhang
Add a new stat that counts the number of times a remote TLB flush is requested, regardless of whether it kicks vCPUs out of guest mode. This allows us to look at how often flushes are initiated. Unlike remote_tlb_flush, this one applies to ARM's instruction-set-based TLB flush implementation, so apply it there too. Original-by: David Matlack <dmatlack@google.com> Signed-off-by: Jing Zhang <jingzhangos@google.com> Message-Id: <20210817002639.3856694-1-jingzhangos@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()Sean Christopherson
Don't export KVM's MMU notifier count helpers, under no circumstance should any downstream module, including x86's vendor code, have a legitimate reason to piggyback KVM's MMU notifier logic. E.g in the x86 case, only KVM's MMU should be elevating the notifier count, and that code is always built into the core kvm.ko module. Fixes: edb298c663fc ("KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range") Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210902175951.1387989-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_pageSean Christopherson
Move "lpage_disallowed_link" out of the first 64 bytes, i.e. out of the first cache line, of kvm_mmu_page so that "spt" and to a lesser extent "gfns" land in the first cache line. "lpage_disallowed_link" is accessed relatively infrequently compared to "spt", which is accessed any time KVM is walking and/or manipulating the shadow page tables. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210901221023.1303578-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache localitySean Christopherson
Move "tdp_mmu_page" into the 1-byte void left by the recently removed "mmio_cached" so that it resides in the first 64 bytes of kvm_mmu_page, i.e. in the same cache line as the most commonly accessed fields. Don't bother wrapping tdp_mmu_page in CONFIG_X86_64, including the field in 32-bit builds doesn't affect the size of kvm_mmu_page, and a future patch can always wrap the field in the unlikely event KVM gains a 1-byte flag that is 32-bit specific. Note, the size of kvm_mmu_page is also unchanged on CONFIG_X86_64=y due to it previously sharing an 8-byte chunk with write_flooding_count. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210901221023.1303578-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"Sean Christopherson
Revert a misguided illegal GPA check when "translating" a non-nested GPA. The check is woefully incomplete as it does not fill in @exception as expected by all callers, which leads to KVM attempting to inject a bogus exception, potentially exposing kernel stack information in the process. WARNING: CPU: 0 PID: 8469 at arch/x86/kvm/x86.c:525 exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525 CPU: 1 PID: 8469 Comm: syz-executor531 Not tainted 5.14.0-rc7-syzkaller #0 RIP: 0010:exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525 Call Trace: x86_emulate_instruction+0xef6/0x1460 arch/x86/kvm/x86.c:7853 kvm_mmu_page_fault+0x2f0/0x1810 arch/x86/kvm/mmu/mmu.c:5199 handle_ept_misconfig+0xdf/0x3e0 arch/x86/kvm/vmx/vmx.c:5336 __vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6021 [inline] vmx_handle_exit+0x336/0x1800 arch/x86/kvm/vmx/vmx.c:6038 vcpu_enter_guest+0x2a1c/0x4430 arch/x86/kvm/x86.c:9712 vcpu_run arch/x86/kvm/x86.c:9779 [inline] kvm_arch_vcpu_ioctl_run+0x47d/0x1b20 arch/x86/kvm/x86.c:10010 kvm_vcpu_ioctl+0x49e/0xe50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3652 The bug has escaped notice because practically speaking the GPA check is useless. The GPA check in question only comes into play when KVM is walking guest page tables (or "translating" CR3), and KVM already handles illegal GPA checks by setting reserved bits in rsvd_bits_mask for each PxE, or in the case of CR3 for loading PTDPTRs, manually checks for an illegal CR3. This particular failure doesn't hit the existing reserved bits checks because syzbot sets guest.MAXPHYADDR=1, and IA32 architecture simply doesn't allow for such an absurd MAXPHYADDR, e.g. 32-bit paging doesn't define any reserved PA bits checks, which KVM emulates by only incorporating the reserved PA bits into the "high" bits, i.e. bits 63:32. Simply remove the bogus check. There is zero meaningful value and no architectural justification for supporting guest.MAXPHYADDR < 32, and properly filling the exception would introduce non-trivial complexity. This reverts commit ec7771ab471ba6a945350353617e2e3385d0e013. Fixes: ec7771ab471b ("KVM: x86: mmu: Add guest physical address check in translate_gpa()") Cc: stable@vger.kernel.org Reported-by: syzbot+200c08e88ae818f849ce@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210831164224.1119728-2-seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_pageJia He
After reverting and restoring the fast tlb invalidation patch series, the mmio_cached is not removed. Hence a unused field is left in kvm_mmu_page. Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Jia He <justin.he@arm.com> Message-Id: <20210830145336.27183-1-justin.he@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710Eduardo Habkost
Support for 710 VCPUs was tested by Red Hat since RHEL-8.4, so increase KVM_SOFT_MAX_VCPUS to 710. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20210903211600.2002377-4-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06kvm: x86: Increase MAX_VCPUS to 1024Eduardo Habkost
Increase KVM_MAX_VCPUS to 1024, so we can test larger VMs. I'm not changing KVM_SOFT_MAX_VCPUS yet because I'm afraid it might involve complicated questions around the meaning of "supported" and "recommended" in the upstream tree. KVM_SOFT_MAX_VCPUS will be changed in a separate patch. For reference, visible effects of this change are: - KVM_CAP_MAX_VCPUS will now return 1024 (of course) - Default value for CPUID[HYPERV_CPUID_IMPLEMENT_LIMITS (00x40000005)].EAX will now be 1024 - KVM_MAX_VCPU_ID will change from 1151 to 4096 - Size of struct kvm will increase from 19328 to 22272 bytes (in x86_64) - Size of struct kvm_ioapic will increase from 1780 to 5084 bytes (in x86_64) - Bitmap stack variables that will grow: - At kvm_hv_flush_tlb() kvm_hv_send_ipi(), vp_bitmap[] and vcpu_bitmap[] will now be 128 bytes long - vcpu_bitmap at bioapic_write_indirect() will be 128 bytes long once patch "KVM: x86: Fix stack-out-of-bounds memory access from ioapic_write_indirect()" is applied Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20210903211600.2002377-3-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUSEduardo Habkost
Instead of requiring KVM_MAX_VCPU_ID to be manually increased every time we increase KVM_MAX_VCPUS, set it to 4*KVM_MAX_VCPUS. This should be enough for CPU topologies where Cores-per-Package and Packages-per-Socket are not powers of 2. In practice, this increases KVM_MAX_VCPU_ID from 1023 to 1152. The only side effect of this change is making some fields in struct kvm_ioapic larger, increasing the struct size from 1628 to 1780 bytes (in x86_64). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20210903211600.2002377-2-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06iwlwifi: fix printk format warnings in uefi.cRandy Dunlap
The kernel test robot reports printk format warnings in uefi.c, so correct them. ../drivers/net/wireless/intel/iwlwifi/fw/uefi.c: In function 'iwl_uefi_get_pnvm': ../drivers/net/wireless/intel/iwlwifi/fw/uefi.c:52:30: warning: format '%zd' expects argument of type 'signed size_t', but argument 7 has type 'long unsigned int' [-Wformat=] 52 | "PNVM UEFI variable not found %d (len %zd)\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 53 | err, package_size); | ~~~~~~~~~~~~ | | | long unsigned int ../drivers/net/wireless/intel/iwlwifi/fw/uefi.c:59:29: warning: format '%zd' expects argument of type 'signed size_t', but argument 6 has type 'long unsigned int' [-Wformat=] 59 | IWL_DEBUG_FW(trans, "Read PNVM from UEFI with size %zd\n", package_size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~ | | | long unsigned int Fixes: 84c3c9952afb ("iwlwifi: move UEFI code to a separate file") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: linux-wireless@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210821020901.25901-1-rdunlap@infradead.org
2021-09-06KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulationMaxim Levitsky
If we are emulating an invalid guest state, we don't have a correct exit reason, and thus we shouldn't do anything in this function. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210826095750.1650467-2-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Fixes: 95b5a48c4f2b ("KVM: VMX: Handle NMIs, #MCs and async #PFs in common irqs-disabled fn", 2019-06-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level hostSean Christopherson
Include pml5_root in the set of special roots if and only if the host, and thus NPT, is using 5-level paging. mmu_alloc_special_roots() expects special roots to be allocated as a bundle, i.e. they're either all valid or all NULL. But for pml5_root, that expectation only holds true if the host uses 5-level paging, which causes KVM to WARN about pml5_root being NULL when the other special roots are valid. The silver lining of 4-level vs. 5-level NPT being tied to the host kernel's paging level is that KVM's shadow root level is constant; unlike VMX's EPT, KVM can't choose 4-level NPT based on guest.MAXPHYADDR. That means KVM can still expect pml5_root to be bundled with the other special roots, it just needs to be conditioned on the shadow root level. Fixes: cb0f722aff6e ("KVM: x86/mmu: Support shadowing NPT when 5-level paging is enabled in host") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210824005824.205536-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-06cpufreq: mediatek-hw: Add support for CPUFREQ HWHector.Yuan
Introduce cpufreq HW driver which can support CPU frequency adjust in MT6779 platform. Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com> [ Viresh: Massaged the patch and cleaned some stuff. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-09-06cpufreq: Add of_perf_domain_get_sharing_cpumaskHector.Yuan
Add of_perf_domain_get_sharing_cpumask function to group cpu to specific performance domain. Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com> [ Viresh: create separate routine parse_perf_domain() and always set the cpumask. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-09-06dt-bindings: cpufreq: add bindings for MediaTek cpufreq HWHector.Yuan
Add devicetree bindings for MediaTek HW driver. Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-09-06dt-bindings: mfd: Add Broadcom CRURafał Miłecki
CRU is a block used in e.g. Northstar devices. It can be seen in the bcm5301x.dtsi and this binding documents its proper usage. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-09-06nvme: update MAINTAINERS email addressChaitanya Kulkarni
Update the MAINTAINERS file email address. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-06nvme: add error handling support for add_disk()Luis Chamberlain
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-06nvme: only call synchronize_srcu when clearing current pathDaniel Wagner
The function nmve_mpath_clear_current_path returns true if the current path has changed. In this case we have to wait for all concurrent submissions to finish. But if we didn't change the current path, there is no point in waiting for another RCU period to finish. Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-06nvme: update keep alive interval when kato is modifiedTatsuya Sasaki
Currently the connection between host and NVMe-oF target gets disconnected by keep-alive timeout when a user connects to a target with a relatively large kato value and then sets the smaller kato with a set features command (e.g. connects with 60 seconds kato value and then sets 10 seconds kato value). The cause is that keep alive command interval on the host, which is defined as unsigned int kato in nvme_ctrl structure, does not follow the kato value changes. This patch updates the keep alive interval in the following steps when the kato is modified by a set features command: stops the keep alive work queue, then sets the kato as new timer value and re-start the queue. Signed-off-by: Tatsuya Sasaki <tatsuya6.sasaki@kioxia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-06nvme-tcp: Do not reset transport on data digest errorsDaniel Wagner
The spec says 7.4.6.1 Digest Error handling When a host detects a data digest error in a C2HData PDU, that host shall continue processing C2HData PDUs associated with the command and when the command processing has completed, if a successful status was returned by the controller, the host shall fail the command with a non-fatal transport error. Currently the transport is reseted when a data digest error is detected. Instead, when a digest error is detected, mark the final status as NVME_SC_DATA_XFER_ERROR and let the upper layer handle the error. In order to keep track of the final result maintain a status field in nvme_tcp_request object and use it to overwrite the completion queue status (which might be successful even though a digest error has been detected) when completing the request. Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-06nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()Hannes Reinecke
The serial number is copied into the buffer via memcpy_and_pad() with the length NVMET_SN_MAX_SIZE. So when printing out we also need to take just that length as anything beyond that will be uninitialized. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-06nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_reqChristoph Hellwig
The target core code never needs the host-side nvme_ctrl structure. Open code two uses of nvmet_is_passthru_req in passthru.c, and then switch the helpers used by the core to return bool. Also rename the fuctions to better match their usage: nvmet_passthru_ctrl -> nvmet_is_passthru_subsys nvmet_req_passthru_ctrl -> nvmet_is_passthru_req Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2021-09-06nvmet: looks at the passthrough controller when initializing CAPAdam Manzanares
For a passthru controller make cap initialization dependent on the cap of the passthru controller, given that multiple Command Set support needs to be supported by the underlying controller. For that move the initialization of CAP later so that it can use the fully initialized nvmet_ctrl structure. Fixes: ab5d0b38c047 (nvmet: add Command Set Identifier support) Signed-off-by: Adam Manzanares <a.manzanares@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org> [hch: refactored the code a bit to keep it more contained in passthru.c] Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-06nvme: move nvme_multi_css into nvme.hAdam Manzanares
Preparatory patch in order to reuse nvme_multi_css in the nvme target code. Signed-off-by: Adam Manzanares <a.manzanares@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-06nvme-multipath: revalidate paths during rescanHannes Reinecke
When triggering a rescan due to a namespace resize we will be receiving AENs on every controller, triggering a rescan of all attached namespaces. If multipath is active only the current path and the ns_head disk will be updated, the other paths will still refer to the old size until AENs for the remaining controllers are received. If I/O comes in before that it might be routed to one of the old paths, triggering an I/O failure with 'access beyond end of device'. With this patch the old paths are skipped from multipath path selection until the controller serving these paths has been rescanned. Signed-off-by: Hannes Reinecke <hare@suse.de> [dwagner: - introduce NVME_NS_READY flag instead of NVME_NS_INVALIDATE - use 'revalidate' instead of 'invalidate' which follows the zoned device code path. - clear NVME_NS_READY before clearing current_path] Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-09-06nvme-multipath: set QUEUE_FLAG_NOWAITChristoph Hellwig
The nvme multipathing code just dispatches bios to one of the blk-mq based paths and never blocks on its own, so set QUEUE_FLAG_NOWAIT to support REQ_NOWAIT bios. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 15:30:22 +0000